diff options
Diffstat (limited to 'MIBS/dasan/SLE-PERFORMANCEMGMT-MIB')
| -rw-r--r-- | MIBS/dasan/SLE-PERFORMANCEMGMT-MIB | 3617 |
1 files changed, 3617 insertions, 0 deletions
diff --git a/MIBS/dasan/SLE-PERFORMANCEMGMT-MIB b/MIBS/dasan/SLE-PERFORMANCEMGMT-MIB new file mode 100644 index 0000000..f09c2d4 --- /dev/null +++ b/MIBS/dasan/SLE-PERFORMANCEMGMT-MIB @@ -0,0 +1,3617 @@ +--
+-- sle-performancemgmt-mib.mib
+-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88
+-- Monday, May 16, 2016 at 16:24:57
+--
+
+ SLE-PERFORMANCEMGMT-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ sleMgmt
+ FROM DASAN-SMI
+ InterfaceIndex
+ FROM IF-MIB
+ OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ TimeTicks, Integer32, Unsigned32, Gauge32, Counter64,
+ BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI;
+
+
+ slePerformanceMgmt MODULE-IDENTITY
+ LAST-UPDATED "200412291118Z" -- December 29, 2004 at 11:18 GMT
+ ORGANIZATION
+ "Organization."
+ CONTACT-INFO
+ "Contact-info."
+ DESCRIPTION
+ "Description."
+ ::= { sleMgmt 5 }
+
+
+
+--
+-- Type definitions
+--
+
+ SleControlStatusType ::= INTEGER
+ {
+ idle(1),
+ busy(2),
+ passed(3),
+ failed(4)
+ }
+
+ SleControlRequestResultType ::= INTEGER
+ {
+ noRequest(1),
+ comExecStarted(5),
+ paramFaulty(11),
+ requestBusy(12),
+ setDataFailed(13),
+ aswTimeout(14),
+ commandFailed(15),
+ commandSuccessed(16)
+ }
+
+ SleStatisticsClearTableIndexType ::= INTEGER
+ {
+ counter(1),
+ portStatisticsTable(2),
+ dot1xPortStatisticsTable(3),
+ lldpStatisticsTable(4)
+ }
+
+
+
+--
+-- Node definitions
+--
+
+ slePortThreshold OBJECT IDENTIFIER ::= { slePerformanceMgmt 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1
+-- 1.3.6.1.4.1.6296.101.5.1.1
+ slePortThresholdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SlePortThresholdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThreshold 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1
+-- 1.3.6.1.4.1.6296.101.5.1.1.1
+ slePortThresholdEntry OBJECT-TYPE
+ SYNTAX SlePortThresholdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleThresholdIndex }
+ ::= { slePortThresholdTable 1 }
+
+
+ SlePortThresholdEntry ::=
+ SEQUENCE {
+ sleThresholdIndex
+ INTEGER,
+ slePortThresholdUpLimit
+ Integer32,
+ slePortThresholdUpSamplingInterval
+ INTEGER,
+ slePortThresholdDownLimit
+ Integer32,
+ slePortThresholdDownSamplingInterval
+ INTEGER,
+ slePortThresholdBlockTimer
+ INTEGER,
+ slePortThresholdPpsCurrLimit
+ Integer32,
+ slePortThresholdPpsBlocked
+ Integer32,
+ slePortThresholdPpsLimit
+ Integer32,
+ slePortThresholdPpsInterval
+ INTEGER,
+ slePortThresholdPpsBlockTimer
+ INTEGER,
+ slePortThresholdWarnTxLimit
+ Integer32,
+ slePortThresholdWarnTxInterval
+ INTEGER,
+ slePortThresholdWarnTxDuration
+ INTEGER,
+ slePortThresholdWarnRxLimit
+ Integer32,
+ slePortThresholdWarnRxInterval
+ INTEGER,
+ slePortThresholdWarnRxDuration
+ INTEGER,
+ slePortThresholdAlarmTxLimit
+ Integer32,
+ slePortThresholdAlarmTxInterval
+ INTEGER,
+ slePortThresholdAlarmTxDuration
+ INTEGER,
+ slePortThresholdAlarmRxLimit
+ Integer32,
+ slePortThresholdAlarmRxInterval
+ INTEGER,
+ slePortThresholdAlarmRxDuration
+ INTEGER
+ }
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.1
+ sleThresholdIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "port index."
+ ::= { slePortThresholdEntry 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.2
+ slePortThresholdUpLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~"
+ ::= { slePortThresholdEntry 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.3
+ slePortThresholdUpSamplingInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clear(0),
+ second5(5),
+ second60(60),
+ second600(600)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The sampling interval value in second. "
+ ::= { slePortThresholdEntry 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.4
+ slePortThresholdDownLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~"
+ ::= { slePortThresholdEntry 4 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.5
+ slePortThresholdDownSamplingInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clear(0),
+ second5(5),
+ second60(60),
+ second600(600)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdEntry 5 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.6
+ slePortThresholdBlockTimer OBJECT-TYPE
+ SYNTAX INTEGER (-1 | 10..3600)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdEntry 6 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.7
+ slePortThresholdPpsCurrLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdEntry 7 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.8
+ slePortThresholdPpsBlocked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdEntry 8 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.9
+ slePortThresholdPpsLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdEntry 9 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.10
+ slePortThresholdPpsInterval OBJECT-TYPE
+ SYNTAX INTEGER (0 | 5 | 60 | 600)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdEntry 10 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.11
+ slePortThresholdPpsBlockTimer OBJECT-TYPE
+ SYNTAX INTEGER (-1 | 10..3600)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdEntry 11 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.12
+ slePortThresholdWarnTxLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~"
+ ::= { slePortThresholdEntry 12 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.13
+ slePortThresholdWarnTxInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clear(0),
+ second5(5),
+ second60(60),
+ second600(600)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sampling interval value in second. "
+ ::= { slePortThresholdEntry 13 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.14
+ slePortThresholdWarnTxDuration OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sampling duration value in second.
+ Duration-time units by the 5 sec"
+ ::= { slePortThresholdEntry 14 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.15
+ slePortThresholdWarnRxLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~"
+ ::= { slePortThresholdEntry 15 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.16
+ slePortThresholdWarnRxInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clear(0),
+ second5(5),
+ second60(60),
+ second600(600)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sampling interval value in second. "
+ ::= { slePortThresholdEntry 16 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.17
+ slePortThresholdWarnRxDuration OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sampling duration value in second.
+ Duration-time units by the 5 sec"
+ ::= { slePortThresholdEntry 17 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.18
+ slePortThresholdAlarmTxLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~"
+ ::= { slePortThresholdEntry 18 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.19
+ slePortThresholdAlarmTxInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clear(0),
+ second5(5),
+ second60(60),
+ second600(600)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sampling interval value in second. "
+ ::= { slePortThresholdEntry 19 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.20
+ slePortThresholdAlarmTxDuration OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sampling duration value in second.
+ Duration-time units by the 5 sec"
+ ::= { slePortThresholdEntry 20 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.21
+ slePortThresholdAlarmRxLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~"
+ ::= { slePortThresholdEntry 21 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.22
+ slePortThresholdAlarmRxInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clear(0),
+ second5(5),
+ second60(60),
+ second600(600)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sampling interval value in second. "
+ ::= { slePortThresholdEntry 22 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.1.1.23
+ slePortThresholdAlarmRxDuration OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sampling duration value in second.
+ Duration-time units by the 5 sec"
+ ::= { slePortThresholdEntry 23 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2
+-- 1.3.6.1.4.1.6296.101.5.1.2
+ slePortThresholdControl OBJECT IDENTIFIER ::= { slePortThreshold 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.1
+-- 1.3.6.1.4.1.6296.101.5.1.2.1
+ slePortThresholdControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ setPortThresholdProfile(1),
+ setPortThresholdBlockProfile(2),
+ setPortThresholdPPSProfile(3),
+ setPortThresholdPPSBlockProfile(4),
+ setPortThresholdWarnTxProfile(5),
+ setPortThresholdWarnRxProfile(6),
+ setPortThresholdAlarmTxProfile(7),
+ setPortThresholdAlarmRxProfile(8)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.2
+-- 1.3.6.1.4.1.6296.101.5.1.2.2
+ slePortThresholdControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.3
+-- 1.3.6.1.4.1.6296.101.5.1.2.3
+ slePortThresholdControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.4
+-- 1.3.6.1.4.1.6296.101.5.1.2.4
+ slePortThresholdControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 4 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.5
+-- 1.3.6.1.4.1.6296.101.5.1.2.5
+ slePortThresholdControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 5 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.6
+-- 1.3.6.1.4.1.6296.101.5.1.2.6
+ slePortThresholdControlIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 6 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.7
+-- 1.3.6.1.4.1.6296.101.5.1.2.7
+ slePortThresholdControlThresholdUpLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~"
+ ::= { slePortThresholdControl 7 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.8
+-- 1.3.6.1.4.1.6296.101.5.1.2.8
+ slePortThresholdControlUpSamplingInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clear(0),
+ second5(5),
+ second60(60),
+ second600(600)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The sampling interval value in second. "
+ ::= { slePortThresholdControl 8 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.9
+-- 1.3.6.1.4.1.6296.101.5.1.2.9
+ slePortThresholdControlThresholdDownLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~"
+ ::= { slePortThresholdControl 9 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.10
+-- 1.3.6.1.4.1.6296.101.5.1.2.10
+ slePortThresholdControlDownSamplingInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clear(0),
+ second5(5),
+ second60(60),
+ second600(600)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 10 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.11
+-- 1.3.6.1.4.1.6296.101.5.1.2.11
+ slePortThresholdControlBlockTimer OBJECT-TYPE
+ SYNTAX INTEGER (-1 | 10..3600)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 11 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.12
+-- 1.3.6.1.4.1.6296.101.5.1.2.12
+ slePortThresholdControlPpsLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 12 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.13
+-- 1.3.6.1.4.1.6296.101.5.1.2.13
+ slePortThresholdControlPpsInterval OBJECT-TYPE
+ SYNTAX INTEGER (0 | 5 | 60 | 600)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 13 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.14
+-- 1.3.6.1.4.1.6296.101.5.1.2.14
+ slePortThresholdControlPpsBlockTimer OBJECT-TYPE
+ SYNTAX INTEGER (-1 | 10..3600)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdControl 14 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.15
+ slePortThresholdControlThresholdLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~
+ ( -1 : delete threshold profile. )"
+ ::= { slePortThresholdControl 15 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.16
+ slePortThresholdControlSamplingInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clear(0),
+ second5(5),
+ second60(60),
+ second600(600)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The sampling interval value in second. "
+ ::= { slePortThresholdControl 16 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.2.17
+ slePortThresholdControlSamplingDuration OBJECT-TYPE
+ SYNTAX INTEGER (5..300)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The sampling interval value in second.
+ Duration-time units by the 5 sec"
+ ::= { slePortThresholdControl 17 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.3
+-- 1.3.6.1.4.1.6296.101.5.1.3
+ slePortThresholdNotification OBJECT IDENTIFIER ::= { slePortThreshold 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.3.1
+-- 1.3.6.1.4.1.6296.101.5.1.3.1
+ slePortThresholdChanged NOTIFICATION-TYPE
+ OBJECTS { slePortThresholdUpLimit, slePortThresholdUpSamplingInterval, slePortThresholdDownLimit, slePortThresholdDownSamplingInterval, slePortThresholdWarnTxLimit,
+ slePortThresholdWarnTxInterval, slePortThresholdWarnTxDuration, slePortThresholdWarnRxLimit, slePortThresholdWarnRxInterval, slePortThresholdWarnRxDuration,
+ slePortThresholdAlarmTxLimit, slePortThresholdAlarmTxInterval, slePortThresholdAlarmTxDuration, slePortThresholdAlarmRxLimit, slePortThresholdAlarmRxInterval,
+ slePortThresholdAlarmRxDuration, slePortThresholdControlRequest, slePortThresholdControlTimeStamp, slePortThresholdControlReqResult }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdNotification 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.3.2
+-- 1.3.6.1.4.1.6296.101.5.1.3.2
+ slePortThresholdBlockProfileChanged NOTIFICATION-TYPE
+ OBJECTS { slePortThresholdControlRequest, slePortThresholdControlTimeStamp, slePortThresholdControlReqResult, slePortThresholdBlockTimer }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdNotification 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.3.3
+-- 1.3.6.1.4.1.6296.101.5.1.3.3
+ slePortThresholdPPSProfileChanged NOTIFICATION-TYPE
+ OBJECTS { slePortThresholdControlRequest, slePortThresholdControlTimeStamp, slePortThresholdControlReqResult, slePortThresholdUpLimit, slePortThresholdUpSamplingInterval
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdNotification 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.1.3.4
+-- 1.3.6.1.4.1.6296.101.5.1.3.4
+ slePortThresholdPPSBlockProfileChanged NOTIFICATION-TYPE
+ OBJECTS { slePortThresholdControlRequest, slePortThresholdControlTimeStamp, slePortThresholdControlReqResult, slePortThresholdPpsBlockTimer }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortThresholdNotification 4 }
+
+
+ slePortRate OBJECT IDENTIFIER ::= { slePerformanceMgmt 2 }
+
+
+ slePortRateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SlePortRateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRate 1 }
+
+
+ slePortRateEntry OBJECT-TYPE
+ SYNTAX SlePortRateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { slePortRateInterfaceIndex }
+ ::= { slePortRateTable 1 }
+
+
+ SlePortRateEntry ::=
+ SEQUENCE {
+ slePortRateInterfaceIndex
+ INTEGER,
+ slePortRateIngressRate
+ Integer32,
+ slePortRateEgressRate
+ Integer32,
+ slePortRateEnhanced
+ INTEGER,
+ slePortRateIngressRateType
+ INTEGER
+ }
+
+ slePortRateInterfaceIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interface Index"
+ ::= { slePortRateEntry 1 }
+
+
+ slePortRateIngressRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ingress rate for port.
+ The value is in units fo 64 kbps.
+ For 100MB ports, the valid range is from 0 to 100000.
+ For 1000MB ports, the valid range is from 0 to 1000000."
+ ::= { slePortRateEntry 2 }
+
+
+ slePortRateEgressRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Egress rate for port,
+ The value is in units fo 64 kbps.
+ For 100MB ports, the valid range is from 0 to 100000.
+ For 1000MB ports, the valid range is from 0 to 1000000."
+ ::= { slePortRateEntry 3 }
+
+
+ slePortRateEnhanced OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRateEntry 4 }
+
+
+ slePortRateIngressRateType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ undefined(-1),
+ drop(1),
+ shape(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ingress rate type"
+ ::= { slePortRateEntry 5 }
+
+
+ slePortRateControl OBJECT IDENTIFIER ::= { slePortRate 2 }
+
+
+ slePortRateControlReqest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ setPortRateProfile(1),
+ setPortRateEnhanced(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRateControl 1 }
+
+
+ slePortRateControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRateControl 2 }
+
+
+ slePortRateControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRateControl 3 }
+
+
+ slePortRateControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRateControl 4 }
+
+
+ slePortRateControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRateControl 5 }
+
+
+ slePortRateControlInterfaceIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ "
+ ::= { slePortRateControl 6 }
+
+
+ slePortRateControlIngressRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Ingress rate for port.
+ The value is in units fo 64 kbps.
+ For 100MB ports, the valid range is from 0 to 100000.
+ For 1000MB ports, the valid range is from 0 to 1000000."
+ ::= { slePortRateControl 7 }
+
+
+ slePortRateControlEgressRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Egress rate for port,
+ The value is in units fo 64 kbps.
+ For 100MB ports, the valid range is from 0 to 100000.
+ For 1000MB ports, the valid range is from 0 to 1000000."
+ ::= { slePortRateControl 8 }
+
+
+ slePortRateControlEnhanced OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRateControl 9 }
+
+
+ slePortRateControlIngressRateType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ undefined(-1),
+ drop(1),
+ shape(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The ingress rate type"
+ ::= { slePortRateControl 10 }
+
+
+ slePortRateNotification OBJECT IDENTIFIER ::= { slePortRate 3 }
+
+
+ slePortRateProfileChanged NOTIFICATION-TYPE
+ OBJECTS { slePortRateControlReqest, slePortRateControlTimeStamp, slePortRateControlReqResult, slePortRateIngressRate, slePortRateIngressRateType,
+ slePortRateEgressRate }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRateNotification 1 }
+
+
+ slePortRateEnhancedChanged NOTIFICATION-TYPE
+ OBJECTS { slePortRateControlReqest, slePortRateControlTimeStamp, slePortRateControlReqResult, slePortRateEnhanced }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortRateNotification 2 }
+
+
+ slePortStatistics OBJECT IDENTIFIER ::= { slePerformanceMgmt 3 }
+
+
+ slePortStatisticsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SlePortStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatistics 1 }
+
+
+ slePortStatisticsEntry OBJECT-TYPE
+ SYNTAX SlePortStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { slePortStatsIndex, slePortStatsInterval, slePortStatsOrder }
+ ::= { slePortStatisticsTable 1 }
+
+
+ SlePortStatisticsEntry ::=
+ SEQUENCE {
+ slePortStatsIndex
+ INTEGER,
+ slePortStatsInterval
+ INTEGER,
+ slePortStatsOrder
+ INTEGER,
+ slePortStatsUpPackets
+ Counter64,
+ slePortStatsUpBytes
+ Counter64,
+ slePortStatsDownPackets
+ Counter64,
+ slePortStatsDownBytes
+ Counter64
+ }
+
+ slePortStatsIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Port index of EthernetPort, only valid for physical ports."
+ ::= { slePortStatisticsEntry 1 }
+
+
+ slePortStatsInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ fiveSeconds(5),
+ oneMinute(60),
+ fifteenMinutes(900),
+ oneDay(86400)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval time of counters (unit: seconds)"
+ ::= { slePortStatisticsEntry 2 }
+
+
+ slePortStatsOrder OBJECT-TYPE
+ SYNTAX INTEGER (0..95)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "History sequence of counters (0: current)"
+ ::= { slePortStatisticsEntry 3 }
+
+
+ slePortStatsUpPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Upstream traffic utilization during slePortStatsInterval seconds.
+ Unit: Accumulated packets per slePortStatsInterval"
+ ::= { slePortStatisticsEntry 4 }
+
+
+ slePortStatsUpBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Upstream traffic utilization during slePortStatsInterval seconds.
+ Unit: Accumulated bytes per slePortStatsInterval"
+ ::= { slePortStatisticsEntry 5 }
+
+
+ slePortStatsDownPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downstream traffic utilization during slePortStatsInterval seconds.
+ Unit: Accumulated packets per slePortStatsInterval"
+ ::= { slePortStatisticsEntry 6 }
+
+
+ slePortStatsDownBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downstream traffic utilization during slePortStatsInterval seconds.
+ Unit: Accumulated bytes per slePortStatsInterval"
+ ::= { slePortStatisticsEntry 7 }
+
+
+ slePortStatisticsControl OBJECT IDENTIFIER ::= { slePortStatistics 2 }
+
+
+ slePortStatsControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clearPortStatistics(1),
+ clearPortStatisticsAll(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatisticsControl 1 }
+
+
+ slePortStatsControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatisticsControl 2 }
+
+
+ slePortStatsControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatisticsControl 3 }
+
+
+ slePortStatsControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatisticsControl 4 }
+
+
+ slePortStatsControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatisticsControl 5 }
+
+
+ slePortStatsControlIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatisticsControl 6 }
+
+
+ slePortStatisticsNotification OBJECT IDENTIFIER ::= { slePortStatistics 3 }
+
+
+ slePortStatisticsCleared NOTIFICATION-TYPE
+ OBJECTS { slePortStatsControlRequest, slePortStatsControlTimeStamp, slePortStatsControlReqResult, slePortStatsIndex }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatisticsNotification 1 }
+
+
+ slePortStatisticsAllCleared NOTIFICATION-TYPE
+ OBJECTS { slePortStatsControlRequest, slePortStatsControlTimeStamp, slePortStatsControlReqResult }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatisticsNotification 2 }
+
+
+ slePortStatisticsAverageTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SlePortStatisticsAverageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatistics 4 }
+
+
+ slePortStatisticsAverageEntry OBJECT-TYPE
+ SYNTAX SlePortStatisticsAverageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { slePortStatsIndex, slePortStatsAvgInterval }
+ ::= { slePortStatisticsAverageTable 1 }
+
+
+ SlePortStatisticsAverageEntry ::=
+ SEQUENCE {
+ slePortStatsAvgInterval
+ INTEGER,
+ slePortStatsAvgTxPackets
+ Counter64,
+ slePortStatsAvgTxBytes
+ Counter64,
+ slePortStatsAvgTxUcastPackets
+ Counter64,
+ slePortStatsAvgTxMcastPackets
+ Counter64,
+ slePortStatsAvgTxBcastPackets
+ Counter64,
+ slePortStatsAvgRxPackets
+ Counter64,
+ slePortStatsAvgRxBytes
+ Counter64,
+ slePortStatsAvgRxUcastPackets
+ Counter64,
+ slePortStatsAvgRxMcastPackets
+ Counter64,
+ slePortStatsAvgRxBcastPackets
+ Counter64
+ }
+
+ slePortStatsAvgInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ fiveSeconds(5),
+ oneMinute(60),
+ tenMinutes(600)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval time of counters (unit: seconds)"
+ ::= { slePortStatisticsAverageEntry 1 }
+
+
+ slePortStatsAvgTxPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of upstream traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: packets per second
+ "
+ ::= { slePortStatisticsAverageEntry 2 }
+
+
+ slePortStatsAvgTxBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of upstream traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: bytes per second
+ "
+ ::= { slePortStatisticsAverageEntry 3 }
+
+
+ slePortStatsAvgTxUcastPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of upstream unicast traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: packets per second
+ "
+ ::= { slePortStatisticsAverageEntry 4 }
+
+
+ slePortStatsAvgTxMcastPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of upstream multicast traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: packets per second
+ "
+ ::= { slePortStatisticsAverageEntry 5 }
+
+
+ slePortStatsAvgTxBcastPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of upstream broadcast traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: packets per second
+ "
+ ::= { slePortStatisticsAverageEntry 6 }
+
+
+ slePortStatsAvgRxPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of downstream traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: packets per second
+ "
+ ::= { slePortStatisticsAverageEntry 7 }
+
+
+ slePortStatsAvgRxBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of downstream traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: bytes per second
+ "
+ ::= { slePortStatisticsAverageEntry 8 }
+
+
+ slePortStatsAvgRxUcastPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of downstream unicast traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: packets per second
+ "
+ ::= { slePortStatisticsAverageEntry 9 }
+
+
+ slePortStatsAvgRxMcastPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of downstream multicast traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: packets per second
+ "
+ ::= { slePortStatisticsAverageEntry 10 }
+
+
+ slePortStatsAvgRxBcastPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average statistics of downstream broadcast traffic calculated during slePortStatsAvgInterval seconds.
+ Unit: packets per second
+ "
+ ::= { slePortStatisticsAverageEntry 11 }
+
+
+ slePortStatisticsAccTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SlePortStatisticsAccEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePortStatistics 5 }
+
+
+ slePortStatisticsAccEntry OBJECT-TYPE
+ SYNTAX SlePortStatisticsAccEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { slePortStatisticsAccHCIndex }
+ ::= { slePortStatisticsAccTable 1 }
+
+
+ SlePortStatisticsAccEntry ::=
+ SEQUENCE {
+ slePortStatisticsAccHCIndex
+ InterfaceIndex,
+ slePortStatisticsAccHCInUnicastPkts
+ Counter64,
+ slePortStatisticsAccHCInMulticastPkts
+ Counter64,
+ slePortStatisticsAccHCInBroadcastPkts
+ Counter64,
+ slePortStatisticsAccHCOutUnicastPkts
+ Counter64,
+ slePortStatisticsAccHCOutMulticastPkts
+ Counter64,
+ slePortStatisticsAccHCOutBroadcastPkts
+ Counter64,
+ slePortStatisticsAccHCInOctets
+ Counter64,
+ slePortStatisticsAccHCOutOctets
+ Counter64,
+ slePortStatisticsAccHCOutVlanTagPkts
+ Counter64,
+ slePortStatisticsAccHCInPauseFrame
+ Counter64,
+ slePortStatisticsAccHCOutPauseFrame
+ Counter64,
+ slePortStatisticsAccHCIpFwDatagrams
+ Counter64,
+ slePortStatisticsAccHCIpInReceives
+ Counter64,
+ slePortStatisticsAccHCInDiscardsPkts
+ Counter64,
+ slePortStatisticsAccHCOutDiscardsPkts
+ Counter64,
+ slePortStatisticsAccHCInErrorsPkts
+ Counter64,
+ slePortStatisticsAccHCOutErrorsPkts
+ Counter64
+ }
+
+ slePortStatisticsAccHCIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ifIndx"
+ ::= { slePortStatisticsAccEntry 1 }
+
+
+ slePortStatisticsAccHCInUnicastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rx unicast packet counter"
+ ::= { slePortStatisticsAccEntry 2 }
+
+
+ slePortStatisticsAccHCInMulticastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rx multicast packet counter"
+ ::= { slePortStatisticsAccEntry 3 }
+
+
+ slePortStatisticsAccHCInBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rx broadcast packet counter"
+ ::= { slePortStatisticsAccEntry 4 }
+
+
+ slePortStatisticsAccHCOutUnicastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Tx unicast packet counter"
+ ::= { slePortStatisticsAccEntry 5 }
+
+
+ slePortStatisticsAccHCOutMulticastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Tx multicast packet counter"
+ ::= { slePortStatisticsAccEntry 6 }
+
+
+ slePortStatisticsAccHCOutBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Tx broadcast packet counter"
+ ::= { slePortStatisticsAccEntry 7 }
+
+
+ slePortStatisticsAccHCInOctets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rx bytes"
+ ::= { slePortStatisticsAccEntry 8 }
+
+
+ slePortStatisticsAccHCOutOctets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Tx bytes"
+ ::= { slePortStatisticsAccEntry 9 }
+
+
+ slePortStatisticsAccHCOutVlanTagPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Tx VLAN tag counter"
+ ::= { slePortStatisticsAccEntry 10 }
+
+
+ slePortStatisticsAccHCInPauseFrame OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IfInPauseFrame "
+ ::= { slePortStatisticsAccEntry 11 }
+
+
+ slePortStatisticsAccHCOutPauseFrame OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IfOutPauseFrame "
+ ::= { slePortStatisticsAccEntry 12 }
+
+
+ slePortStatisticsAccHCIpFwDatagrams OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IpFwDatagrams "
+ ::= { slePortStatisticsAccEntry 13 }
+
+
+ slePortStatisticsAccHCIpInReceives OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IpInReceives "
+ ::= { slePortStatisticsAccEntry 14 }
+
+
+ slePortStatisticsAccHCInDiscardsPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rx discards packet counter"
+ ::= { slePortStatisticsAccEntry 15 }
+
+
+ slePortStatisticsAccHCOutDiscardsPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Tx discards packet counter"
+ ::= { slePortStatisticsAccEntry 16 }
+
+
+ slePortStatisticsAccHCInErrorsPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rx errors packet counter"
+ ::= { slePortStatisticsAccEntry 17 }
+
+
+ slePortStatisticsAccHCOutErrorsPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Tx errors packet counter"
+ ::= { slePortStatisticsAccEntry 18 }
+
+
+ slePortStatisticsPacketPerQueueTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SlePortStatisticsPacketPerQueueEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "slePortStatisticsPacketPerQueueTable"
+ ::= { slePortStatistics 6 }
+
+
+ slePortStatisticsPacketPerQueueEntry OBJECT-TYPE
+ SYNTAX SlePortStatisticsPacketPerQueueEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "key: slePortStatisticsPPQPortNum, slePortStatisticsPPQQueueNumber"
+ INDEX { slePortStatisticsPPQPortNum, slePortStatisticsPPQQueueNumber }
+ ::= { slePortStatisticsPacketPerQueueTable 1 }
+
+
+ SlePortStatisticsPacketPerQueueEntry ::=
+ SEQUENCE {
+ slePortStatisticsPPQPortNum
+ INTEGER,
+ slePortStatisticsPPQQueueNumber
+ INTEGER,
+ slePortStatisticsPPQPacketPassedCount
+ Counter64,
+ slePortStatisticsPPQOctetPassedCount
+ Counter64,
+ slePortStatisticsPPQPacketDiscards
+ Counter64,
+ slePortStatisticsPPQOctetDiscard
+ Counter64,
+ slePortStatisticsPPQPacketNonUnicastDiscards
+ Counter64,
+ slePortStatisticsPPQOctetNonUnicastDiscards
+ Counter64,
+ slePortStatisticsPPQPacketUnicastDiscards
+ Counter64,
+ slePortStatisticsPPQOctetUnicastDiscards
+ Counter64,
+ slePortStatisticsPPQPktEnqueued
+ Counter64,
+ slePortStatisticsPPQOctEnqueued
+ Counter64
+ }
+
+ slePortStatisticsPPQPortNum OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Physical port index."
+ ::= { slePortStatisticsPacketPerQueueEntry 1 }
+
+
+ slePortStatisticsPPQQueueNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Queue number (0~7)"
+ ::= { slePortStatisticsPacketPerQueueEntry 2 }
+
+
+ slePortStatisticsPPQPacketPassedCount OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Packet Passed count."
+ ::= { slePortStatisticsPacketPerQueueEntry 3 }
+
+
+ slePortStatisticsPPQOctetPassedCount OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Packet Passed count expressed by bytes."
+ ::= { slePortStatisticsPacketPerQueueEntry 4 }
+
+
+ slePortStatisticsPPQPacketDiscards OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Packet discards count."
+ ::= { slePortStatisticsPacketPerQueueEntry 5 }
+
+
+ slePortStatisticsPPQOctetDiscard OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Packet discards expressed by bytes."
+ ::= { slePortStatisticsPacketPerQueueEntry 6 }
+
+
+ slePortStatisticsPPQPacketNonUnicastDiscards OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Statistic of non-unicast packet dropped by queue (Unit: packet)"
+ ::= { slePortStatisticsPacketPerQueueEntry 7 }
+
+
+ slePortStatisticsPPQOctetNonUnicastDiscards OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Statistic of non-unicast packet dropped by queue (Unit: octet)"
+ ::= { slePortStatisticsPacketPerQueueEntry 8 }
+
+
+ slePortStatisticsPPQPacketUnicastDiscards OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Statistic of Unicast packet dropped by queue (Unit: packet)"
+ ::= { slePortStatisticsPacketPerQueueEntry 9 }
+
+
+ slePortStatisticsPPQOctetUnicastDiscards OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Statistic of Unicast packet dropped by queue (Unit: octet)"
+ ::= { slePortStatisticsPacketPerQueueEntry 10 }
+
+
+ slePortStatisticsPPQPktEnqueued OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "current queuing packets"
+ ::= { slePortStatisticsPacketPerQueueEntry 11 }
+
+
+ slePortStatisticsPPQOctEnqueued OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "current queuing packets"
+ ::= { slePortStatisticsPacketPerQueueEntry 12 }
+
+
+ slePortStatisticsPacketPerQueueControl OBJECT IDENTIFIER ::= { slePortStatistics 7 }
+
+
+ slePortStatisticsPPQControlReqest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clearPortStatisticsPPQDropCounter(1),
+ clearPPQStatQueue(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command
+ 1. clearPortStatisticsPPQDropCounter"
+ ::= { slePortStatisticsPacketPerQueueControl 1 }
+
+
+ slePortStatisticsPPQControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of user command"
+ ::= { slePortStatisticsPacketPerQueueControl 2 }
+
+
+ slePortStatisticsPPQControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum time for the manager for a long running user command"
+ ::= { slePortStatisticsPacketPerQueueControl 3 }
+
+
+ slePortStatisticsPPQControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)"
+ ::= { slePortStatisticsPacketPerQueueControl 4 }
+
+
+ slePortStatisticsPPQControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command"
+ ::= { slePortStatisticsPacketPerQueueControl 5 }
+
+
+ slePortStatisticsPPQControlPortNum OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port number that user wants to clear"
+ ::= { slePortStatisticsPacketPerQueueControl 6 }
+
+
+ slePortStatisticsPPQControlQueueNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ queue0(0),
+ queue1(1),
+ queue2(2),
+ queue3(3),
+ queue4(4),
+ queue5(5),
+ queue6(6),
+ queue7(7),
+ allQueue(255)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Select queue that user wants to clear:
+ 0. Queue 0
+ 1. Queue 1
+ 2. Queue 2
+ 3. Queue 3
+ 4. Queue 4
+ 5. Queue 5
+ 6. Queue 6
+ 7. Queue 7
+ 255. All queue"
+ ::= { slePortStatisticsPacketPerQueueControl 7 }
+
+
+ slePortStatisticsPPQControlPacketType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ nonUnicast(1),
+ unicast(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Choose type of packet:
+ 1. Non-unicast
+ 2. Unicast"
+ ::= { slePortStatisticsPacketPerQueueControl 8 }
+
+
+ sleCpuStatistics OBJECT IDENTIFIER ::= { slePerformanceMgmt 4 }
+
+
+ sleCpuIntervalStatisticsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleCpuIntervalStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleCpuStatistics 1 }
+
+
+ sleCpuIntervalStatisticsEntry OBJECT-TYPE
+ SYNTAX SleCpuIntervalStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleCpuIntvlStatsPortIndex, sleCpuIntvlStatsInterval, sleCpuIntvlStatsOrder }
+ ::= { sleCpuIntervalStatisticsTable 1 }
+
+
+ SleCpuIntervalStatisticsEntry ::=
+ SEQUENCE {
+ sleCpuIntvlStatsPortIndex
+ InterfaceIndex,
+ sleCpuIntvlStatsInterval
+ INTEGER,
+ sleCpuIntvlStatsOrder
+ INTEGER,
+ sleCpuIntvlStatsTxUcastPkts
+ Counter64,
+ sleCpuIntvlStatsTxMcastPkts
+ Counter64,
+ sleCpuIntvlStatsTxBcastPkts
+ Counter64,
+ sleCpuIntvlStatsTxUcastBytes
+ Counter64,
+ sleCpuIntvlStatsTxMcastBytes
+ Counter64,
+ sleCpuIntvlStatsTxBcastBytes
+ Counter64,
+ sleCpuIntvlStatsRxUcastPkts
+ Counter64,
+ sleCpuIntvlStatsRxMcastPkts
+ Counter64,
+ sleCpuIntvlStatsRxBcastPkts
+ Counter64,
+ sleCpuIntvlStatsRxUcastBytes
+ Counter64,
+ sleCpuIntvlStatsRxMcastBytes
+ Counter64,
+ sleCpuIntvlStatsRxBcastBytes
+ Counter64
+ }
+
+ sleCpuIntvlStatsPortIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Port index of EthernetPort, only valid for physical ports."
+ ::= { sleCpuIntervalStatisticsEntry 1 }
+
+
+ sleCpuIntvlStatsInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ fiveSeconds(1),
+ oneMinute(2),
+ tenMinute(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval time of counters (unit: seconds)"
+ ::= { sleCpuIntervalStatisticsEntry 2 }
+
+
+ sleCpuIntvlStatsOrder OBJECT-TYPE
+ SYNTAX INTEGER (0..95)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "History sequence of counters (0: current)
+ (support only 0)
+ "
+ ::= { sleCpuIntervalStatisticsEntry 3 }
+
+
+ sleCpuIntvlStatsTxUcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the txUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Packets/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 4 }
+
+
+ sleCpuIntvlStatsTxMcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the txMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval"
+ ::= { sleCpuIntervalStatisticsEntry 5 }
+
+
+ sleCpuIntvlStatsTxBcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the txBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Packets/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 6 }
+
+
+ sleCpuIntvlStatsTxUcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the txUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Bytes/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 7 }
+
+
+ sleCpuIntvlStatsTxMcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the txMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Bytes/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 8 }
+
+
+ sleCpuIntvlStatsTxBcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the txBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Bytes/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 9 }
+
+
+ sleCpuIntvlStatsRxUcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the rxUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Packets/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 10 }
+
+
+ sleCpuIntvlStatsRxMcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the rxMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Packets/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 11 }
+
+
+ sleCpuIntvlStatsRxBcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the rxBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Packets/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 12 }
+
+
+ sleCpuIntvlStatsRxUcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the rxUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Bytes/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 13 }
+
+
+ sleCpuIntvlStatsRxMcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the rxMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Bytes/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 14 }
+
+
+ sleCpuIntvlStatsRxBcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value of the rxBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval
+ Unit: Bytes/ sleCpuIntvlStatsInterval
+ "
+ ::= { sleCpuIntervalStatisticsEntry 15 }
+
+
+ sleCpuStatisticsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleCpuStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleCpuStatistics 2 }
+
+
+ sleCpuStatisticsEntry OBJECT-TYPE
+ SYNTAX SleCpuStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleCpuStatsPortIndex }
+ ::= { sleCpuStatisticsTable 1 }
+
+
+ SleCpuStatisticsEntry ::=
+ SEQUENCE {
+ sleCpuStatsPortIndex
+ InterfaceIndex,
+ sleCpuStatsTxUcastPkts
+ Counter64,
+ sleCpuStatsTxMcastPkts
+ Counter64,
+ sleCpuStatsTxBcastPkts
+ Counter64,
+ sleCpuStatsTxUcastBytes
+ Counter64,
+ sleCpuStatsTxMcastBytes
+ Counter64,
+ sleCpuStatsTxBcastBytes
+ Counter64,
+ sleCpuStatsRxUcastPkts
+ Counter64,
+ sleCpuStatsRxMcastPkts
+ Counter64,
+ sleCpuStatsRxBcastPkts
+ Counter64,
+ sleCpuStatsRxUcastBytes
+ Counter64,
+ sleCpuStatsRxMcastBytes
+ Counter64,
+ sleCpuStatsRxBcastBytes
+ Counter64
+ }
+
+ sleCpuStatsPortIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Port index of EthernetPort, only valid for physical ports."
+ ::= { sleCpuStatisticsEntry 1 }
+
+
+ sleCpuStatsTxUcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the txUnicast that have been transmitted to CPU
+ Unit : Packets
+ "
+ ::= { sleCpuStatisticsEntry 2 }
+
+
+ sleCpuStatsTxMcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the txMulticast that have been transmitted to CPU
+ Unit : Packets
+ "
+ ::= { sleCpuStatisticsEntry 3 }
+
+
+ sleCpuStatsTxBcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the txBroadcast that have been transmitted to CPU
+ Unit : Packets
+ "
+ ::= { sleCpuStatisticsEntry 4 }
+
+
+ sleCpuStatsTxUcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the txUnicast that have been transmitted to CPU
+ Unit : Bytes
+ "
+ ::= { sleCpuStatisticsEntry 5 }
+
+
+ sleCpuStatsTxMcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the txMulticast that have been transmitted to CPU
+ Unit : Bytes
+ "
+ ::= { sleCpuStatisticsEntry 6 }
+
+
+ sleCpuStatsTxBcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the txBroadcast that have been transmitted to CPU
+ Unit : Bytes
+ "
+ ::= { sleCpuStatisticsEntry 7 }
+
+
+ sleCpuStatsRxUcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the rxUnicast that have been transmitted to CPU
+ Unit : Packets
+ "
+ ::= { sleCpuStatisticsEntry 8 }
+
+
+ sleCpuStatsRxMcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the rxMulticast that have been transmitted to CPU
+ Unit : Packets
+ "
+ ::= { sleCpuStatisticsEntry 9 }
+
+
+ sleCpuStatsRxBcastPkts OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the rxBroadcast that have been transmitted to CPU
+ Unit : Packets
+ "
+ ::= { sleCpuStatisticsEntry 10 }
+
+
+ sleCpuStatsRxUcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the rxUnicast that have been transmitted to CPU
+ Unit : Bytes
+ "
+ ::= { sleCpuStatisticsEntry 11 }
+
+
+ sleCpuStatsRxMcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the rxMulticast that have been transmitted to CPU
+ Unit : Bytes
+ "
+ ::= { sleCpuStatisticsEntry 12 }
+
+
+ sleCpuStatsRxBcastBytes OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Total value of the trMulticast that have been transmitted to CPU
+ Unit : Bytes
+ "
+ ::= { sleCpuStatisticsEntry 13 }
+
+
+ sleCpuStatisticsControl OBJECT IDENTIFIER ::= { sleCpuStatistics 3 }
+
+
+ sleCpuStatsControlReqest OBJECT-TYPE
+ SYNTAX INTEGER { clearCpuStatistics(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleCpuStatisticsControl 1 }
+
+
+ sleCpuStatsControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleCpuStatisticsControl 2 }
+
+
+ sleCpuStatsControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleCpuStatisticsControl 3 }
+
+
+ sleCpuStatsControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleCpuStatisticsControl 4 }
+
+
+ sleCpuStatsControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleCpuStatisticsControl 5 }
+
+
+ sleCpuStatsControlIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleCpuStatisticsControl 6 }
+
+
+ sleCpuStatisticsNotification OBJECT IDENTIFIER ::= { sleCpuStatistics 4 }
+
+
+ sleCpuStatisticsCleared NOTIFICATION-TYPE
+ OBJECTS { sleCpuStatsControlReqest, sleCpuStatsControlTimeStamp, sleCpuStatsControlReqResult, sleCpuStatsPortIndex }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleCpuStatisticsNotification 1 }
+
+
+ slePerformanceBase OBJECT IDENTIFIER ::= { slePerformanceMgmt 5 }
+
+
+ slePerformanceBaseInfo OBJECT IDENTIFIER ::= { slePerformanceBase 1 }
+
+
+ slePerformanceBaseProtoStatsEnable OBJECT-TYPE
+ SYNTAX BITS
+ {
+ arp(0),
+ ip(1),
+ icmp(2),
+ tcp(3),
+ udp(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The admin status of gathering each protocol statistics
+ "
+ ::= { slePerformanceBaseInfo 1 }
+
+
+ slePerformanceBaseCpuPpsStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Cpu PPS status."
+ ::= { slePerformanceBaseInfo 2 }
+
+
+ slePerformanceBaseCpuPpsThreshold OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CPU PPS threshold."
+ ::= { slePerformanceBaseInfo 3 }
+
+
+ slePerformanceBaseCpuPpsAvg OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CPU PPS average."
+ ::= { slePerformanceBaseInfo 4 }
+
+
+ slePerformanceBaseControl OBJECT IDENTIFIER ::= { slePerformanceBase 2 }
+
+
+ slePerformanceBaseControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ setProtocolStatsEnable(1),
+ setPsetCpuPpsProfile(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePerformanceBaseControl 1 }
+
+
+ slePerformanceBaseControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePerformanceBaseControl 2 }
+
+
+ slePerformanceBaseControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePerformanceBaseControl 3 }
+
+
+ slePerformanceBaseControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePerformanceBaseControl 4 }
+
+
+ slePerformanceBaseControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePerformanceBaseControl 5 }
+
+
+ slePerformanceBaseControlProtoStatsEnable OBJECT-TYPE
+ SYNTAX BITS
+ {
+ arp(0),
+ ip(1),
+ icmp(2),
+ tcp(3),
+ udp(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The admin status of gathering
+ each protocol statistics"
+ ::= { slePerformanceBaseControl 6 }
+
+
+ slePerformanceBaseControlCpuPpsStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Cpu PPS status."
+ ::= { slePerformanceBaseControl 7 }
+
+
+ slePerformanceBaseControlCpuPpsThreshold OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The CPU PPS threshold."
+ ::= { slePerformanceBaseControl 8 }
+
+
+ slePerformanceBaseNotification OBJECT IDENTIFIER ::= { slePerformanceBase 3 }
+
+
+ slePerformanceBaseProtoStatsChanged NOTIFICATION-TYPE
+ OBJECTS { slePerformanceBaseControlRequest, slePerformanceBaseControlTimeStamp, slePerformanceBaseControlReqResult, slePerformanceBaseControlProtoStatsEnable }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePerformanceBaseNotification 1 }
+
+
+ slePerformanceBaseCpuPpsProfileChanged NOTIFICATION-TYPE
+ OBJECTS { slePerformanceBaseControlRequest, slePerformanceBaseControlTimeStamp, slePerformanceBaseControlReqResult, slePerformanceBaseControlCpuPpsStatus, slePerformanceBaseControlCpuPpsThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "setPsetCpuPpsProfile"
+ ::= { slePerformanceBaseNotification 2 }
+
+
+-- Node definitions
+--
+-- 1.3.6.1.4.1.6296.101.5.6
+ sleSfpmonThreshold OBJECT IDENTIFIER ::= { slePerformanceMgmt 6 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1
+ sleSfpmonThresholdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF sleSfpmonThresholdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleSfpmonThreshold 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1
+ sleSfpmonThresholdEntry OBJECT-TYPE
+ SYNTAX sleSfpmonThresholdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleSfpmonThresholdIndex }
+ ::= { sleSfpmonThresholdTable 1 }
+
+
+ sleSfpmonThresholdEntry ::=
+ SEQUENCE {
+ sleSfpmonThresholdIndex
+ INTEGER,
+ sleSfpmonWarnTxPowerLow
+ Integer32,
+ sleSfpmonWarnTxPowerHigh
+ Integer32,
+ sleSfpmonWarnTxPowerDuration
+ INTEGER,
+ sleSfpmonWarnRxPowerLow
+ Integer32,
+ sleSfpmonWarnRxPowerHigh
+ Integer32,
+ sleSfpmonWarnRxPowerDuration
+ INTEGER,
+ sleSfpmonAlarmTxPowerLow
+ Integer32,
+ sleSfpmonAlarmTxPowerHigh
+ Integer32,
+ sleSfpmonAlarmTxPowerDuration
+ INTEGER,
+ sleSfpmonAlarmRxPowerLow
+ Integer32,
+ sleSfpmonAlarmRxPowerHigh
+ Integer32,
+ sleSfpmonAlarmRxPowerDuration
+ INTEGER,
+ sleSfpmonWarnTxbiasLow
+ Integer32,
+ sleSfpmonWarnTxbiasHigh
+ Integer32,
+ sleSfpmonAlarmTxbiasLow
+ Integer32,
+ sleSfpmonAlarmTxbiasHigh
+ Integer32,
+ sleSfpmonWarnTemperLow
+ Integer32,
+ sleSfpmonWarnTemperHigh
+ Integer32,
+ sleSfpmonAlarmTemperLow
+ Integer32,
+ sleSfpmonAlarmTemperHigh
+ Integer32,
+ sleSfpmonWarnVoltageLow
+ Integer32,
+ sleSfpmonWarnVoltageHigh
+ Integer32,
+ sleSfpmonAlarmVoltageLow
+ Integer32,
+ sleSfpmonAlarmVoltageHigh
+ Integer32,
+ sleSfpmonWarnTxPowerMode
+ INTEGER,
+ sleSfpmonAlarmTxPowerMode
+ INTEGER,
+ sleSfpmonWarnRxPowerMode
+ INTEGER,
+ sleSfpmonAlarmRxPowerMode
+ INTEGER,
+ sleSfpmonWarnTxbiasMode
+ INTEGER,
+ sleSfpmonAlarmTxbiasMode
+ INTEGER,
+ sleSfpmonWarnTemperMode
+ INTEGER,
+ sleSfpmonAlarmTemperMode
+ INTEGER,
+ sleSfpmonWarnVoltageMode
+ INTEGER,
+ sleSfpmonAlarmVoltageMode
+ INTEGER
+ }
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.1
+ sleSfpmonThresholdIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "port index."
+ ::= { sleSfpmonThresholdEntry 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.2
+ sleSfpmonWarnTxPowerLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Power threshold -40~8,1647 (dBm)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.3
+ sleSfpmonWarnTxPowerHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Power threshold -40~8,1647 (dBm)
+ It must be devided by 10000."
+ ::= { sleSfpmonThresholdEntry 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.4
+ sleSfpmonWarnTxPowerDuration OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Duration-time units by the 10 sec"
+ ::= { sleSfpmonThresholdEntry 4 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.5
+ sleSfpmonWarnRxPowerLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Power threshold -40~8,1647 (dBm)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 5 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.6
+ sleSfpmonWarnRxPowerHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Power threshold -40~8,1647 (dBm)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 6 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.7
+ sleSfpmonWarnRxPowerDuration OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Duration-time units by the 10 sec"
+ ::= { sleSfpmonThresholdEntry 7 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.8
+ sleSfpmonAlarmTxPowerLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Power threshold -40~8,1647 (dBm)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 8 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.9
+ sleSfpmonAlarmTxPowerHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Power threshold -40~8,1647 (dBm)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 9 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.10
+ sleSfpmonAlarmTxPowerDuration OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Duration-time units by the 10 sec"
+ ::= { sleSfpmonThresholdEntry 10 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.11
+ sleSfpmonAlarmRxPowerLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Power threshold -40~8,1647 (dBm)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 11 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.12
+ sleSfpmonAlarmRxPowerHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Power threshold -40~8,1647 (dBm)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 12 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.13
+ sleSfpmonAlarmRxPowerDuration OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Duration-time units by the 10 sec"
+ ::= { sleSfpmonThresholdEntry 13 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.13
+ sleSfpmonWarnTxbiasLow OBJECT-TYPE
+ SYNTAX Integer32 (0..131)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Txbias Threshold 0~131(mA)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 14 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.13
+ sleSfpmonWarnTxbiasHigh OBJECT-TYPE
+ SYNTAX Integer32 (0..131)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Txbias Threshold 0~131(mA)
+ It must be devided by 10000."
+ ::= { sleSfpmonThresholdEntry 15 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.13
+ sleSfpmonAlarmTxbiasLow OBJECT-TYPE
+ SYNTAX Integer32 (0..131)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Txbias Threshold 0~131(mA)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 16 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.1.1.13
+ sleSfpmonAlarmTxbiasHigh OBJECT-TYPE
+ SYNTAX Integer32 (0..131)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Txbias Threshold 0~131(mA)
+ It must be devided by 10000.
+ "
+ ::= { sleSfpmonThresholdEntry 17 }
+
+
+ sleSfpmonWarnTemperLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Temperature threshold -128~127.99(C)
+ It must be devided by 10000."
+ ::= { sleSfpmonThresholdEntry 18 }
+
+
+ sleSfpmonWarnTemperHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Temperature threshold -128~127.99(C)
+ It must be devided by 10000."
+ ::= { sleSfpmonThresholdEntry 19 }
+
+
+ sleSfpmonAlarmTemperLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Temperature threshold -128~127.99(C)
+ It must be devided by 10000."
+ ::= { sleSfpmonThresholdEntry 20 }
+
+
+ sleSfpmonAlarmTemperHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Temperature threshold -128~127.99(C)
+ It must be devided by 10000."
+ ::= { sleSfpmonThresholdEntry 21 }
+
+
+ sleSfpmonWarnVoltageLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Voltage threshold 0~6.5535(V)
+ It must be devided by 10000"
+ ::= { sleSfpmonThresholdEntry 22 }
+
+
+ sleSfpmonWarnVoltageHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Voltage threshold 0~6.5535(V)
+ It must be devided by 10000"
+ ::= { sleSfpmonThresholdEntry 23 }
+
+
+ sleSfpmonAlarmVoltageLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Voltage threshold 0~6.5535(V)
+ It must be devided by 10000"
+ ::= { sleSfpmonThresholdEntry 24 }
+
+
+ sleSfpmonAlarmVoltageHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Voltage threshold 0~6.5535(V)
+ It must be devided by 10000"
+ ::= { sleSfpmonThresholdEntry 25 }
+
+
+ sleSfpmonWarnTxPowerMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold operational mode (1:on, 0:off)"
+ ::= { sleSfpmonThresholdEntry 26 }
+
+
+ sleSfpmonAlarmTxPowerMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 0: default mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdEntry 27 }
+
+
+ sleSfpmonWarnRxPowerMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 0: default mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdEntry 28 }
+
+
+ sleSfpmonAlarmRxPowerMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 0: default mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdEntry 29 }
+
+
+ sleSfpmonWarnTxbiasMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 0: default mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdEntry 30 }
+
+
+ sleSfpmonAlarmTxbiasMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 0: default mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdEntry 31 }
+
+
+ sleSfpmonWarnTemperMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 0: default mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdEntry 32 }
+
+
+ sleSfpmonAlarmTemperMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 0: default mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdEntry 33 }
+
+
+ sleSfpmonWarnVoltageMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 0: default mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdEntry 34 }
+
+
+ sleSfpmonAlarmVoltageMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ default(0),
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 0: default mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdEntry 35 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2
+ sleSfpmonThresholdControl OBJECT IDENTIFIER ::= { sleSfpmonThreshold 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.1
+ sleSfpmonThresholdControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ setSfpmonThresholdWarnTxPower(1),
+ setSfpmonThresholdWarnRxPower(2),
+ setSfpmonThresholdAlarmTxPower(3),
+ setSfpmonThresholdAlarmRxPower(4),
+ clearSfpmonThresholdWarnTxPower(5),
+ clearSfpmonThresholdWarnRxPower(6),
+ clearSfpmonThresholdAlarmTxPower(7),
+ clearSfpmonThresholdAlarmRxPower(8),
+ setSfpmonThresholdWarnTxbias(9),
+ setSfpmonThresholdAlarmTxbias(10),
+ clearSfpmonThresholdWarnTxbias(11),
+ clearSfpmonThresholdAlarmTxbias(12),
+ setSfpmonThresholdWarnTemper(13),
+ setSfpmonThresholdAlarmTemper(14),
+ clearSfpmonThresholdWarnTemper(15),
+ clearSfpmonThresholdAlarmTemper(16),
+ setSfpmonThresholdWarnVoltage(17),
+ setSfpmonThresholdAlarmVoltage(18),
+ clearSfpmonThresholdWarnVoltage(19),
+ clearSfpmonThresholdAlarmVoltage(20)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleSfpmonThresholdControl 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.2
+ sleSfpmonThresholdControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleSfpmonThresholdControl 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.3
+ sleSfpmonThresholdControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleSfpmonThresholdControl 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.4
+ sleSfpmonThresholdControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleSfpmonThresholdControl 4 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.5
+ sleSfpmonThresholdControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleSfpmonThresholdControl 5 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.6
+ sleSfpmonThresholdControlIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleSfpmonThresholdControl 6 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.7
+ sleSfpmonThresholdControlPowerLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Power threshold in dBm -40 ~ 8.1647 (dBm)
+ It must be multiplied by 10000."
+ ::= { sleSfpmonThresholdControl 7 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.8
+ sleSfpmonThresholdControlPowerHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Power threshold in dBm -40 ~ 8.1647 (dBm)
+ It must be multiplied by 10000."
+ ::= { sleSfpmonThresholdControl 8 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.9
+ sleSfpmonThresholdControlPowerDuration OBJECT-TYPE
+ SYNTAX INTEGER (5..300)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Duration-time units by the 10 sec"
+ ::= { sleSfpmonThresholdControl 9 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.7
+ sleSfpmonThresholdControlTxbiasLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Txbias 0~131 (mA)
+ It must be multiplied by 10000."
+ ::= { sleSfpmonThresholdControl 10 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.7
+ sleSfpmonThresholdControlTxbiasHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Txbias 0~131 (mA)
+ It must be multiplied by 10000."
+ ::= { sleSfpmonThresholdControl 11 }
+
+
+ sleSfpmonThresholdControlTemperLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Temperature threshold 0~131 (mA)
+ It must be multiplied by 10000."
+ ::= { sleSfpmonThresholdControl 12 }
+
+
+ sleSfpmonThresholdControlTemperHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Temperature threshold 0~131 (mA)
+ It must be multiplied by 10000."
+ ::= { sleSfpmonThresholdControl 13 }
+
+
+ sleSfpmonThresholdControlVoltageLow OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The voltage threshold 0~6.5535 (V)
+ It must be multiplied by 10000."
+ ::= { sleSfpmonThresholdControl 14 }
+
+
+ sleSfpmonThresholdControlVoltageHigh OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The voltage threshold 0~6.5535 (V)
+ It must be multiplied by 10000."
+ ::= { sleSfpmonThresholdControl 15 }
+
+
+ sleSfpmonThresholdControlMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ admin(1),
+ oper(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The module threshold mode
+ 1: admin mode
+ 2: operational mode"
+ ::= { sleSfpmonThresholdControl 16 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.3
+ sleSfpmonThresholdNotification OBJECT IDENTIFIER ::= { sleSfpmonThreshold 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.3.1
+ sleSfpmonThresholdPowerChanged NOTIFICATION-TYPE
+ OBJECTS { sleSfpmonThresholdIndex, sleSfpmonWarnTxPowerLow, sleSfpmonWarnTxPowerHigh, sleSfpmonWarnTxPowerDuration, sleSfpmonWarnRxPowerLow,
+ sleSfpmonWarnRxPowerHigh, sleSfpmonWarnRxPowerDuration, sleSfpmonAlarmTxPowerLow, sleSfpmonAlarmTxPowerHigh, sleSfpmonAlarmTxPowerDuration,
+ sleSfpmonAlarmRxPowerLow, sleSfpmonAlarmRxPowerHigh, sleSfpmonAlarmRxPowerDuration, sleSfpmonThresholdControlRequest, sleSfpmonThresholdControlTimeStamp,
+ sleSfpmonThresholdControlReqResult, sleSfpmonWarnTxPowerMode, sleSfpmonAlarmTxPowerMode, sleSfpmonWarnRxPowerMode, sleSfpmonAlarmRxPowerMode
+ }
+ STATUS current
+ DESCRIPTION
+ "setSfpmonThresholdWarnTxPower
+ setSfpmonThresholdWarnRxPower
+ setSfpmonThresholdAlarmTxPower
+ setSfpmonThresholdAlarmRxPower
+ clearSfpmonThresholdWarnTxPower
+ clearSfpmonThresholdWarnRxPower
+ clearSfpmonThresholdAlarmTxPower
+ clearSfpmonThresholdAlarmRxPower"
+ ::= { sleSfpmonThresholdNotification 1 }
+
+
+ sleSfpmonThresholdTxbiasChanged NOTIFICATION-TYPE
+ OBJECTS { sleSfpmonThresholdControlRequest, sleSfpmonThresholdControlTimeStamp, sleSfpmonWarnTxbiasMode, sleSfpmonAlarmTxbiasMode, sleSfpmonThresholdControlReqResult,
+ sleSfpmonThresholdIndex, sleSfpmonWarnTxbiasLow, sleSfpmonWarnTxbiasHigh, sleSfpmonAlarmTxbiasLow, sleSfpmonAlarmTxbiasHigh
+ }
+ STATUS current
+ DESCRIPTION
+ "setSfpmonThresholdWarnTxbias
+ setSfpmonThresholdAlarmTxbias
+ clearSfpmonThresholdWarnTxbias
+ clearSfpmonThresholdAlarmTxbias"
+ ::= { sleSfpmonThresholdNotification 2 }
+
+
+ sleSfpmonThresholdTemperChanged NOTIFICATION-TYPE
+ OBJECTS { sleSfpmonThresholdControlRequest, sleSfpmonThresholdControlTimeStamp, sleSfpmonThresholdControlReqResult, sleSfpmonThresholdIndex, sleSfpmonWarnTemperLow,
+ sleSfpmonWarnTemperMode, sleSfpmonAlarmTemperMode, sleSfpmonAlarmTemperLow, sleSfpmonWarnTemperHigh, sleSfpmonAlarmTemperHigh
+ }
+ STATUS current
+ DESCRIPTION
+ "setSfpmonThresholdWarnTemper
+ setSfpmonThresholdAlarmTemper
+ clearSfpmonThresholdWarnTemper
+ clearSfpmonThresholdAlarmTemper"
+ ::= { sleSfpmonThresholdNotification 3 }
+
+
+ sleSfpmonThresholdVoltageChanged NOTIFICATION-TYPE
+ OBJECTS { sleSfpmonThresholdControlRequest, sleSfpmonThresholdControlTimeStamp, sleSfpmonThresholdControlReqResult, sleSfpmonThresholdIndex, sleSfpmonThresholdControlVoltageLow,
+ sleSfpmonThresholdControlVoltageHigh, sleSfpmonThresholdControlMode }
+ STATUS current
+ DESCRIPTION
+ "setSfpmonThresholdWarnVoltage
+ setSfpmonThresholdAlarmVoltage
+ clearSfpmonThresholdWarnVoltage
+ clearSfpmonThresholdAlarmVoltage"
+ ::= { sleSfpmonThresholdNotification 4 }
+
+
+ sleVlanStatistics OBJECT IDENTIFIER ::= { slePerformanceMgmt 7 }
+
+
+ sleVlanStatisticsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleVlanStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleVlanStatistics 1 }
+
+
+ sleVlanStatisticsEntry OBJECT-TYPE
+ SYNTAX SleVlanStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleVlanStatisticsIndex }
+ ::= { sleVlanStatisticsTable 1 }
+
+
+ SleVlanStatisticsEntry ::=
+ SEQUENCE {
+ sleVlanStatisticsIndex
+ Integer32,
+ sleVlanStatisticsIngressBytes
+ Counter64,
+ sleVlanStatisticsEgressBytes
+ Counter64,
+ sleVlanStatisticsIngressPackets
+ Counter64,
+ sleVlanStatisticsEgressPackets
+ Counter64
+ }
+
+ sleVlanStatisticsIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The VLAN index."
+ ::= { sleVlanStatisticsEntry 1 }
+
+
+ sleVlanStatisticsIngressBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bytes that ingress on the VLAN"
+ ::= { sleVlanStatisticsEntry 2 }
+
+
+ sleVlanStatisticsEgressBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bytes that egress on the VLAN."
+ ::= { sleVlanStatisticsEntry 3 }
+
+
+ sleVlanStatisticsIngressPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Packets that ingress on the VLAN."
+ ::= { sleVlanStatisticsEntry 4 }
+
+
+ sleVlanStatisticsEgressPackets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Packets that egress on the VLAN."
+ ::= { sleVlanStatisticsEntry 5 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2
+ sleVlanStatisticsControl OBJECT IDENTIFIER ::= { sleVlanStatistics 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.1
+ sleVlanStatisticsControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ clearVlanStatistics(1),
+ clearVlanStatisticsAll(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleVlanStatisticsControl 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.2
+ sleVlanStatisticsControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleVlanStatisticsControl 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.3
+ sleVlanStatisticsControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleVlanStatisticsControl 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.4
+ sleVlanStatisticsControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleVlanStatisticsControl 4 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.5
+ sleVlanStatisticsControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleVlanStatisticsControl 5 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.6
+ sleVlanStatisticsControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleVlanStatisticsControl 6 }
+
+
+ sleVlanStatisticsNotification OBJECT IDENTIFIER ::= { sleVlanStatistics 3 }
+
+
+ sleVlanStatisticsCleared NOTIFICATION-TYPE
+ OBJECTS { sleVlanStatisticsControlRequest, sleVlanStatisticsControlTimeStamp, sleVlanStatisticsControlReqResult, sleVlanStatisticsControlIndex }
+ STATUS current
+ DESCRIPTION
+ "Clear VLAN statistics"
+ ::= { sleVlanStatisticsNotification 1 }
+
+
+ sleVlanStatisticsAllCleared NOTIFICATION-TYPE
+ OBJECTS { sleVlanStatisticsControlRequest, sleVlanStatisticsControlTimeStamp, sleVlanStatisticsControlReqResult }
+ STATUS current
+ DESCRIPTION
+ "Clear all VLANs statistics"
+ ::= { sleVlanStatisticsNotification 2 }
+
+
+ slePhyStat OBJECT IDENTIFIER ::= { slePerformanceMgmt 8 }
+
+
+ slePhyInternalStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SlePhyInternalStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePhyStat 1 }
+
+
+ slePhyInternalStatEntry OBJECT-TYPE
+ SYNTAX SlePhyInternalStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleVlanStatisticsIndex }
+ ::= { slePhyInternalStatTable 1 }
+
+
+ SlePhyInternalStatEntry ::=
+ SEQUENCE {
+ slePhyInternalStatIndex
+ Integer32
+ }
+
+ slePhyInternalStatIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface index."
+ ::= { slePhyInternalStatEntry 1 }
+
+
+ slePhyExternalStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SlePhyExternalStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePhyStat 2 }
+
+
+ slePhyExternalStatEntry OBJECT-TYPE
+ SYNTAX SlePhyExternalStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleVlanStatisticsIndex }
+ ::= { slePhyExternalStatTable 1 }
+
+
+ SlePhyExternalStatEntry ::=
+ SEQUENCE {
+ slePhyExternalStatIfIndex
+ Integer32,
+ slePhyExternalStatEtherStatsCRCAlignErrors
+ Counter64,
+ slePhyExternalStatRxMacDiscards
+ Counter64,
+ slePhyExternalStatIdleError
+ Counter64
+ }
+
+ slePhyExternalStatIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface index."
+ ::= { slePhyExternalStatEntry 1 }
+
+
+ slePhyExternalStatEtherStatsCRCAlignErrors OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ether Stats CRC Align Errors"
+ ::= { slePhyExternalStatEntry 35 }
+
+
+ slePhyExternalStatRxMacDiscards OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rx Mac Discards"
+ ::= { slePhyExternalStatEntry 49 }
+
+
+ slePhyExternalStatIdleError OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Idle Error"
+ ::= { slePhyExternalStatEntry 50 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2
+ slePhyStatControl OBJECT IDENTIFIER ::= { slePhyStat 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.1
+ slePhyStatControlRequest OBJECT-TYPE
+ SYNTAX INTEGER { clearPhyStats(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePhyStatControl 1 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.2
+ slePhyStatControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePhyStatControl 2 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.3
+ slePhyStatControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePhyStatControl 3 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.4
+ slePhyStatControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePhyStatControl 4 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.5
+ slePhyStatControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePhyStatControl 5 }
+
+
+-- 1.3.6.1.4.1.6296.101.5.6.2.6
+ slePhyStatControlIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The interface index."
+ ::= { slePhyStatControl 6 }
+
+
+ slePerformanceMgmtGroup OBJECT-GROUP
+ OBJECTS { sleThresholdIndex, slePortThresholdUpLimit, slePortThresholdUpSamplingInterval, slePortThresholdDownLimit, slePortThresholdDownSamplingInterval,
+ slePortThresholdBlockTimer, slePortThresholdPpsCurrLimit, slePortThresholdPpsBlocked, slePortThresholdPpsLimit, slePortThresholdPpsInterval,
+ slePortThresholdPpsBlockTimer, slePortThresholdControlRequest, slePortThresholdControlStatus, slePortThresholdControlTimer, slePortThresholdControlTimeStamp,
+ slePortThresholdControlReqResult, slePortThresholdControlIndex, slePortThresholdControlThresholdUpLimit, slePortThresholdControlUpSamplingInterval, slePortThresholdControlThresholdDownLimit,
+ slePortThresholdControlDownSamplingInterval, slePortThresholdControlBlockTimer, slePortThresholdControlPpsLimit, slePortThresholdControlPpsInterval, slePortThresholdControlPpsBlockTimer,
+ slePortRateInterfaceIndex, slePortRateIngressRate, slePortRateEgressRate, slePortRateControlReqest, slePortRateControlStatus,
+ slePortRateControlTimer, slePortRateControlTimeStamp, slePortRateControlReqResult, slePortRateControlInterfaceIndex, slePortRateControlIngressRate,
+ slePortRateControlEgressRate, slePortStatsIndex, slePortStatsInterval, slePortStatsOrder, slePortStatsUpPackets,
+ slePortStatsUpBytes, slePortStatsDownPackets, slePortStatsDownBytes, slePortStatsControlRequest, slePortStatsControlStatus,
+ slePortStatsControlTimer, slePortStatsControlTimeStamp, slePortStatsControlReqResult, slePortStatsControlIndex, sleCpuIntvlStatsPortIndex,
+ sleCpuIntvlStatsInterval, sleCpuIntvlStatsOrder, sleCpuIntvlStatsTxUcastPkts, sleCpuIntvlStatsTxMcastPkts, sleCpuIntvlStatsTxBcastPkts,
+ sleCpuIntvlStatsTxUcastBytes, sleCpuIntvlStatsTxMcastBytes, sleCpuIntvlStatsTxBcastBytes, sleCpuIntvlStatsRxUcastPkts, sleCpuIntvlStatsRxMcastPkts,
+ sleCpuIntvlStatsRxBcastPkts, sleCpuIntvlStatsRxUcastBytes, sleCpuIntvlStatsRxMcastBytes, sleCpuIntvlStatsRxBcastBytes, sleCpuStatsPortIndex,
+ sleCpuStatsTxUcastPkts, sleCpuStatsTxMcastPkts, sleCpuStatsTxBcastPkts, sleCpuStatsTxUcastBytes, sleCpuStatsTxMcastBytes,
+ sleCpuStatsTxBcastBytes, sleCpuStatsRxUcastPkts, sleCpuStatsRxMcastPkts, sleCpuStatsRxBcastPkts, sleCpuStatsRxUcastBytes,
+ sleCpuStatsRxMcastBytes, sleCpuStatsRxBcastBytes, sleCpuStatsControlReqest, sleCpuStatsControlStatus, sleCpuStatsControlTimer,
+ sleCpuStatsControlTimeStamp, sleCpuStatsControlReqResult, slePortStatsAvgRxPackets, slePortStatsAvgRxBytes, slePortStatsAvgRxUcastPackets,
+ slePortStatsAvgRxMcastPackets, slePortStatsAvgRxBcastPackets, slePortStatsAvgTxPackets, slePortStatsAvgTxBytes, slePortStatsAvgTxUcastPackets,
+ slePortStatsAvgTxMcastPackets, slePortStatsAvgTxBcastPackets, slePortStatisticsAccHCInUnicastPkts, slePortStatisticsAccHCInMulticastPkts, slePortStatisticsAccHCOutUnicastPkts,
+ slePortStatisticsAccHCOutMulticastPkts, slePortStatisticsAccHCOutBroadcastPkts, slePortStatisticsAccHCInOctets, slePortStatisticsAccHCOutOctets, slePortStatisticsAccHCOutVlanTagPkts,
+ slePortStatisticsPPQPortNum, slePortStatisticsPPQQueueNumber, slePortStatisticsPPQPacketPassedCount, slePortStatisticsPPQOctetPassedCount, slePortStatisticsPPQPacketDiscards,
+ slePortStatisticsPPQOctetDiscard, slePortThresholdWarnTxLimit, slePortThresholdWarnTxInterval, slePortThresholdWarnTxDuration, slePortThresholdWarnRxLimit,
+ slePortThresholdWarnRxInterval, slePortThresholdWarnRxDuration, slePortThresholdAlarmTxLimit, slePortThresholdAlarmTxInterval, slePortThresholdAlarmTxDuration,
+ slePortThresholdAlarmRxLimit, slePortThresholdAlarmRxInterval, slePortThresholdAlarmRxDuration, slePortThresholdControlThresholdLimit, slePortThresholdControlSamplingInterval,
+ slePortThresholdControlSamplingDuration, sleSfpmonThresholdIndex, sleSfpmonWarnTxPowerLow, sleSfpmonWarnTxPowerHigh, sleSfpmonWarnTxPowerDuration,
+ sleSfpmonWarnRxPowerLow, sleSfpmonWarnRxPowerHigh, sleSfpmonWarnRxPowerDuration, sleSfpmonAlarmTxPowerLow, sleSfpmonAlarmTxPowerHigh,
+ sleSfpmonAlarmTxPowerDuration, sleSfpmonAlarmRxPowerLow, sleSfpmonAlarmRxPowerHigh, sleSfpmonAlarmRxPowerDuration, sleSfpmonThresholdControlRequest,
+ sleSfpmonThresholdControlStatus, sleSfpmonThresholdControlTimer, sleSfpmonThresholdControlTimeStamp, sleSfpmonThresholdControlReqResult, sleSfpmonThresholdControlIndex,
+ sleSfpmonThresholdControlPowerLow, sleSfpmonThresholdControlPowerHigh, sleSfpmonThresholdControlPowerDuration, sleSfpmonWarnTxbiasLow, sleSfpmonWarnTxbiasHigh,
+ sleSfpmonAlarmTxbiasLow, sleSfpmonAlarmTxbiasHigh, sleSfpmonWarnTemperLow, sleSfpmonWarnTemperHigh, sleSfpmonAlarmTemperLow,
+ sleSfpmonAlarmTemperHigh, sleSfpmonThresholdControlTxbiasLow, sleSfpmonThresholdControlTxbiasHigh, sleSfpmonThresholdControlTemperLow, sleSfpmonThresholdControlTemperHigh,
+ sleSfpmonThresholdControlVoltageLow, sleSfpmonThresholdControlVoltageHigh, slePerformanceBaseCpuPpsStatus, slePerformanceBaseCpuPpsThreshold, slePerformanceBaseCpuPpsAvg,
+ slePerformanceBaseControlCpuPpsStatus, slePerformanceBaseControlCpuPpsThreshold, sleVlanStatisticsIndex, sleVlanStatisticsIngressBytes, sleVlanStatisticsEgressBytes,
+ sleVlanStatisticsIngressPackets, sleVlanStatisticsEgressPackets, sleVlanStatisticsControlRequest, sleVlanStatisticsControlStatus, sleVlanStatisticsControlTimer,
+ sleVlanStatisticsControlTimeStamp, sleVlanStatisticsControlReqResult, sleVlanStatisticsControlIndex, slePortStatisticsAccHCInPauseFrame, slePortStatisticsAccHCOutPauseFrame,
+ slePortStatisticsAccHCIpFwDatagrams, slePortStatisticsAccHCIpInReceives, slePortStatisticsPPQPacketNonUnicastDiscards, slePortStatisticsPPQOctetNonUnicastDiscards, slePortStatisticsPPQPacketUnicastDiscards,
+ slePortStatisticsPPQOctetUnicastDiscards, slePortStatisticsPPQControlReqest, slePortStatisticsPPQControlStatus, slePortStatisticsPPQControlTimer, slePortStatisticsPPQControlTimeStamp,
+ slePortStatisticsPPQControlReqResult, slePortStatisticsPPQControlPortNum, slePortStatisticsPPQControlQueueNumber, slePortStatisticsPPQControlPacketType, slePortRateIngressRateType,
+ slePortRateControlIngressRateType, slePhyInternalStatIndex, slePhyExternalStatIfIndex, slePhyExternalStatEtherStatsCRCAlignErrors, slePhyExternalStatRxMacDiscards,
+ slePhyExternalStatIdleError, slePhyStatControlRequest, slePhyStatControlStatus, slePhyStatControlTimer, slePhyStatControlTimeStamp,
+ slePhyStatControlReqResult, slePhyStatControlIfIndex, slePortStatisticsAccHCInDiscardsPkts, slePortStatisticsAccHCOutDiscardsPkts, slePortStatisticsAccHCInErrorsPkts,
+ slePortStatisticsAccHCOutErrorsPkts, slePortStatisticsPPQPktEnqueued, slePortStatisticsPPQOctEnqueued, sleCpuStatsControlIndex, slePortRateEnhanced,
+ slePortRateControlEnhanced, slePortStatsAvgInterval, slePortStatisticsAccHCIndex, slePortStatisticsAccHCInBroadcastPkts, slePerformanceBaseProtoStatsEnable,
+ slePerformanceBaseControlRequest, slePerformanceBaseControlStatus, slePerformanceBaseControlTimer, slePerformanceBaseControlTimeStamp, slePerformanceBaseControlReqResult,
+ slePerformanceBaseControlProtoStatsEnable, sleSfpmonWarnVoltageLow, sleSfpmonWarnVoltageHigh, sleSfpmonAlarmVoltageLow, sleSfpmonAlarmVoltageHigh,
+ sleSfpmonWarnTxPowerMode, sleSfpmonAlarmTxPowerMode, sleSfpmonWarnRxPowerMode, sleSfpmonAlarmRxPowerMode, sleSfpmonWarnTxbiasMode,
+ sleSfpmonAlarmTxbiasMode, sleSfpmonWarnTemperMode, sleSfpmonAlarmTemperMode, sleSfpmonWarnVoltageMode, sleSfpmonAlarmVoltageMode,
+ sleSfpmonThresholdControlMode }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePerformanceMgmt 9 }
+
+
+ slePerformancdMgmtNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { slePortThresholdChanged, slePortThresholdBlockProfileChanged, slePortThresholdPPSProfileChanged, slePortThresholdPPSBlockProfileChanged, slePortStatisticsCleared,
+ slePerformanceBaseProtoStatsChanged, slePortStatisticsAllCleared, sleCpuStatisticsCleared, sleSfpmonThresholdTxbiasChanged, sleSfpmonThresholdTemperChanged,
+ sleSfpmonThresholdVoltageChanged, slePerformanceBaseCpuPpsProfileChanged, sleVlanStatisticsCleared, sleVlanStatisticsAllCleared, slePortRateEnhancedChanged,
+ slePortRateProfileChanged, sleSfpmonThresholdPowerChanged }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { slePerformanceMgmt 10 }
+
+
+
+ END
+
+--
+-- sle-performancemgmt-mib.mib
+--
|