diff options
Diffstat (limited to 'MIBS/dell/DELL-NETWORKING-SYSTEM-COMPONENT-MIB')
| -rw-r--r-- | MIBS/dell/DELL-NETWORKING-SYSTEM-COMPONENT-MIB | 715 |
1 files changed, 715 insertions, 0 deletions
diff --git a/MIBS/dell/DELL-NETWORKING-SYSTEM-COMPONENT-MIB b/MIBS/dell/DELL-NETWORKING-SYSTEM-COMPONENT-MIB new file mode 100644 index 0000000..2969b92 --- /dev/null +++ b/MIBS/dell/DELL-NETWORKING-SYSTEM-COMPONENT-MIB @@ -0,0 +1,715 @@ +-- ***************************************************************** +-- DELL-NETWORKING-SYSTEM-COMPONENT-MIB +-- +-- +-- Copyright (c) 2003-2014 by Dell Inc. All Rights Reserved. +-- All rights reserved. +-- ***************************************************************** +-- + +DELL-NETWORKING-SYSTEM-COMPONENT-MIB DEFINITIONS ::= BEGIN + +IMPORTS + + MODULE-IDENTITY, OBJECT-TYPE,Integer32 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP + FROM SNMPv2-CONF + DisplayString + FROM RFC1213-MIB + dellNetMgmt + FROM DELL-NETWORKING-SMI + DellNetCamPartitionType + FROM DELL-NETWORKING-TC + ; + +dellNetSysComponentMib MODULE-IDENTITY + LAST-UPDATED "201108020000Z" + ORGANIZATION "Dell Inc" + CONTACT-INFO + "http://www.dell.com/support" + + DESCRIPTION + "Dell Networking OS System component MIB. + Dell Networking OS System component allow user to view the SW information + of a component in the system. + + Currently, the available component information that are avaibale + are + 1) CAM Entries on linecard + - Overall system CAM usage table + - L2 Ingress or Egress CAM Usage + - L3 Ingress or Egress CAM Usage + - L3Ext Table CAM Usage (Specific to S-series L3 tables-Broadcom pltforms) + + " + ::= { dellNetMgmt 7 } + + +dellNetSysComponentObjects OBJECT IDENTIFIER ::= { dellNetSysComponentMib 1 } +dellNetCamEntries OBJECT IDENTIFIER ::= { dellNetSysComponentObjects 1 } +dellNetSysComponentTrap OBJECT IDENTIFIER ::= { dellNetSysComponentObjects 2 } + +-- TEXTUAL-CONVENTION +-- Status +-- mandatory +-- Descr + +camUsageTable OBJECT-TYPE + SYNTAX SEQUENCE OF CamUsageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of general CAM usages table." + ::= { dellNetCamEntries 1 } + +camUsageEntry OBJECT-TYPE + SYNTAX CamUsageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of CAM usage table. + The table show the different partition of CAM + " + + INDEX { camUsageSlot, camUsagePipeNum, camUsagePartId } + ::= { camUsageTable 1 } + + +CamUsageEntry ::= SEQUENCE { + + camUsageSlot Integer32, + camUsagePipeNum Integer32, + camUsagePartId DellNetCamPartitionType, + camUsagePartDesc DisplayString, + camUsageTotal Integer32, + camUsageUsed Integer32 + + } + +camUsageSlot OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The slot number of linecard where the CAM is located + " + ::= { camUsageEntry 1 } + +camUsagePipeNum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The port pipe number on the linecard where the CAM is located + " + ::= { camUsageEntry 2 } + +camUsagePartId OBJECT-TYPE + SYNTAX DellNetCamPartitionType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The partition id of the CAM on the line card. + " + ::= { camUsageEntry 3 } + +camUsagePartDesc OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The description of the CAM partition id." + ::= { camUsageEntry 4 } + +camUsageTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to this CAM partition + " + ::= { camUsageEntry 5 } + +camUsageUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured to this CAM partition + " + ::= { camUsageEntry 6 } + + +-- End of General CAM Usage Entry + + +camUsageL2Table OBJECT-TYPE + SYNTAX SEQUENCE OF CamUsageL2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Layer 2 or switch layer CAM usages table." + ::= { dellNetCamEntries 2 } + +camUsageL2Entry OBJECT-TYPE + SYNTAX CamUsageL2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Layer 2 (switch layer ) CAM usage table. + The table show the different partition of CAM and if the cam + is used in the Ingress or Egress. + " + + INDEX { camUsageL2Slot, camUsageL2PipeId, camUsageL2PipeLine } + ::= { camUsageL2Table 1 } + +CamUsageL2Entry ::= SEQUENCE { + + camUsageL2Slot Integer32, + camUsageL2PipeId Integer32, + camUsageL2IngAclTotal Integer32, + camUsageL2IngAclUsed Integer32, + camUsageL2IngFibTotal Integer32, + camUsageL2IngFibUsed Integer32, + camUsageL2EgrAclTotal Integer32, + camUsageL2EgrAclUsed Integer32, + camUsageL2PipeLine Integer32 + } + +camUsageL2Slot OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The slot number of linecard where the CAM is located + " + ::= { camUsageL2Entry 1 } + +camUsageL2PipeId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The port pipe number on the linecard where the CAM is located + " + ::= { camUsageL2Entry 2 } + +camUsageL2IngAclTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 2 ingress ACL + " + ::= { camUsageL2Entry 3 } + +camUsageL2IngAclUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 2 ingress ACL + " + ::= { camUsageL2Entry 4 } + +camUsageL2IngFibTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 2 ingress FIB + " + ::= { camUsageL2Entry 7 } + +camUsageL2IngFibUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 2 ingress FIB + " + ::= { camUsageL2Entry 8 } + +camUsageL2EgrAclTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 2 Egress ACL + " + ::= { camUsageL2Entry 9 } + +camUsageL2EgrAclUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 2 Egress Acl + " + ::= { camUsageL2Entry 10 } + +camUsageL2PipeLine OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The Pipeline number of the chip where the CAM is located + " + ::= { camUsageL2Entry 11 } + + +-- End of camUsageL2Entry + + +camUsageL3Table OBJECT-TYPE + SYNTAX SEQUENCE OF CamUsageL3Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Layer 3 or router layer CAM usages table." + ::= { dellNetCamEntries 3 } + +camUsageL3Entry OBJECT-TYPE + SYNTAX CamUsageL3Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Layer 3 (router layer ) CAM usage table. + The table show the different partition of CAM and if the cam + is used in the Ingress or Egress. + " + INDEX { camUsageL3Slot, camUsageL3PipeId, camUsageL3PipeLine} + ::= { camUsageL3Table 1 } + +CamUsageL3Entry ::= SEQUENCE { + + camUsageL3Slot Integer32, + camUsageL3PipeId Integer32, + camUsageL3IngFibTotal Integer32, + camUsageL3IngFibUsed Integer32, + camUsageL3IngSysFlowTotal Integer32, + camUsageL3IngSysFlowUsed Integer32, + camUsageL3IngTrcListTotal Integer32, + camUsageL3IngTrcListUsed Integer32, + camUsageL3IngMcastFibTotal Integer32, + camUsageL3IngMcastFibUsed Integer32, + camUsageL3IngQosTotal Integer32, + camUsageL3IngQosUsed Integer32, + camUsageL3IngPbrTotal Integer32, + camUsageL3IngPbrUsed Integer32, + camUsageL3IngAclTotal Integer32, + camUsageL3IngAclUsed Integer32, + camUsageL3EgrAclTotal Integer32, + camUsageL3EgrAclUsed Integer32, + camUsageL3PipeLine Integer32 +} + +camUsageL3Slot OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The slot number of linecard where the CAM is located + " + ::= { camUsageL3Entry 1 } + +camUsageL3PipeId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The port pipe number on the linecard where the CAM is located + " + ::= { camUsageL3Entry 2 } + +camUsageL3IngFibTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 ingress FIB + " + ::= { camUsageL3Entry 3 } + +camUsageL3IngFibUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 3 ingress FIB + " + ::= { camUsageL3Entry 4 } + +camUsageL3IngSysFlowTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 ingress system flow + " + ::= { camUsageL3Entry 5 } + +camUsageL3IngSysFlowUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 3 ingress system flow + " + ::= { camUsageL3Entry 6 } + +camUsageL3IngTrcListTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 ingress trace list + " + ::= { camUsageL3Entry 7 } + +camUsageL3IngTrcListUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 3 ingress trace list + " + ::= { camUsageL3Entry 8 } + +camUsageL3IngMcastFibTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 ingress multicast FIB + " + ::= { camUsageL3Entry 9 } + +camUsageL3IngMcastFibUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 3 ingress multicast FIB + " + ::= { camUsageL3Entry 10 } + +camUsageL3IngQosTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 ingress QOS + " + ::= { camUsageL3Entry 11 } + +camUsageL3IngQosUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 3 ingress QOS + " + ::= { camUsageL3Entry 12 } + + +camUsageL3IngPbrTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 ingress PBR + " + ::= { camUsageL3Entry 13 } + +camUsageL3IngPbrUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 3 ingress QOS + " + ::= { camUsageL3Entry 14 } + +camUsageL3IngAclTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 ingress ACL + " + ::= { camUsageL3Entry 15 } + +camUsageL3IngAclUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 3 ingress ACL + " + ::= { camUsageL3Entry 16 } + +camUsageL3EgrAclTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 egress ACL + " + ::= { camUsageL3Entry 17 } + +camUsageL3EgrAclUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used or configured in layer 3 egress ACL + " + ::= { camUsageL3Entry 18 } + +camUsageL3PipeLine OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The Pipeline number of the chip where the CAM is located + " + ::= { camUsageL3Entry 19 } + + -- + -- ##camUsageL3ExtTable - Table for S-series or BCM specific + -- CAM/Table usage info + -- + +camUsageL3ExtTable OBJECT-TYPE + SYNTAX SEQUENCE OF CamUsageL3ExtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Layer 3 or router layer CAM usages table based on BCM pltform." + ::= { dellNetCamEntries 4 } + +camUsageL3ExtEntry OBJECT-TYPE + SYNTAX CamUsageL3ExtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Layer 3 (router layer ) CAM usage table. + The table show the different partition of CAM/Table based on BCM + architecture. + " + INDEX { camUsageL3ExtSlot, camUsageL3ExtPipeId } + ::= { camUsageL3ExtTable 1 } + +CamUsageL3ExtEntry ::= SEQUENCE { + + camUsageL3ExtSlot Integer32, + camUsageL3ExtPipeId Integer32, + camUsageL3ExtHostTotal Integer32, + camUsageL3ExtHostUsed Integer32, + camUsageL3ExtLPMTotal Integer32, + camUsageL3ExtLPMUsed Integer32 + } + +camUsageL3ExtSlot OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The slot number of linecard where the CAM is located + " + ::= { camUsageL3ExtEntry 1 } + +camUsageL3ExtPipeId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The port pipe number on the linecard where the CAM is located + " + ::= { camUsageL3ExtEntry 2 } + +camUsageL3ExtHostTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 Host table. Host table is shared by + IPv4,IPv6 unicast host route entries (ARP) and IPv4,IPv6 Multicast entries. + The usage reflects sum of all these entries + " + ::= { camUsageL3ExtEntry 3 } + +camUsageL3ExtHostUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam used in layer 3 Host table. As Host table is shared by + IPv4,Ipv6 unicast host route entries and IPv4,IPv6 Multicast entries. + The usage reflects sum of all these entries. + " + ::= { camUsageL3ExtEntry 4 } + +camUsageL3ExtLPMTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size allocated to layer 3 Longest Prefix Match table. The + LPM table is shared by IPv4,IPv6 unicast route entries. + " + ::= { camUsageL3ExtEntry 5 } + +camUsageL3ExtLPMUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total cam size used in layer 3 Longest Prefix Match table. The + LPM table is shared by IPv4,Ipv6 unicast route entries.The usage + reflects sum of IPv4 and v6 unicast route entries. + " + ::= { camUsageL3ExtEntry 6 } + +-- End of camUsageL3ExtEntry + + -- + -- ## Alarm Group or Traps + -- + + sysCompAlarmMibNotifications OBJECT IDENTIFIER ::= { dellNetSysComponentTrap 0 } + sysCompAlarmVariable OBJECT IDENTIFIER ::= { dellNetSysComponentTrap 1 } + + -- + -- TRAP VarBind Data + -- + + sysCompAlarmLevel OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "the message warning level" + ::= { sysCompAlarmVariable 1 } + + + sysCompAlarmVarString OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "An generic string value in the TRAP object" + ::= { sysCompAlarmVariable 2 } + + + sysCompSlotId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The associated LineCard in the TRAP object" + ::= { sysCompAlarmVariable 3 } + + sysCompPortPipe OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The associated port pipe in the TRAP object" + ::= { sysCompAlarmVariable 4 } + + sysCompCamPartId OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The associated CAM partion name in the TRAP object" + ::= { sysCompAlarmVariable 5 } + + -- + -- TRAPS + -- + + camUsageThresholdExceed NOTIFICATION-TYPE + OBJECTS { sysCompAlarmLevel, + sysCompAlarmVarString, + sysCompSlotId, + sysCompPortPipe, + sysCompCamPartId + } + STATUS current + DESCRIPTION + "The agent generate this trap when the + cam usage for a partition is exceeded." + ::= { sysCompAlarmMibNotifications 1 } + + camIsFull NOTIFICATION-TYPE + OBJECTS { sysCompAlarmLevel, + sysCompAlarmVarString, + sysCompSlotId, + sysCompPortPipe, + sysCompCamPartId + } + STATUS current + DESCRIPTION + "The agent generate this trap when the + cam is fully used." + ::= { sysCompAlarmMibNotifications 2 } + + camAuditError NOTIFICATION-TYPE + OBJECTS { sysCompAlarmLevel, + sysCompAlarmVarString, + sysCompSlotId, + sysCompPortPipe, + sysCompCamPartId + } + STATUS current + DESCRIPTION + "The agent generate this trap when a + cam entry mismatches with the Software entry." + ::= { sysCompAlarmMibNotifications 3 } + +END |