diff options
Diffstat (limited to 'MIBS/dell/F10-IF-EXTENSION-MIB')
| -rw-r--r-- | MIBS/dell/F10-IF-EXTENSION-MIB | 507 |
1 files changed, 507 insertions, 0 deletions
diff --git a/MIBS/dell/F10-IF-EXTENSION-MIB b/MIBS/dell/F10-IF-EXTENSION-MIB new file mode 100644 index 0000000..0631b84 --- /dev/null +++ b/MIBS/dell/F10-IF-EXTENSION-MIB @@ -0,0 +1,507 @@ + F10-IF-EXTENSION-MIB DEFINITIONS ::= BEGIN + -- Force10 Networks, Inc. + -- 390 Holger Way + -- San Jose, CA 95134 + + -- This module provides authoritative definitions for + -- Force10 extenstion to the IF MIB. + -- + -- This module will be extended, as needed. + -- + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Counter64, Unsigned32 + FROM SNMPv2-SMI + TimeStamp, DisplayString, TruthValue + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + ifIndex + FROM IF-MIB + f10Mgmt + FROM FORCE10-SMI; + + f10IfExtensionMib MODULE-IDENTITY + LAST-UPDATED "200804071200Z" -- Apr 7, 2008 12:00:00 GMT + ORGANIZATION + "Force10 Networks, Inc." + CONTACT-INFO + "Force10 Networks, Inc. + 350 Holger Way + San Jose, CA 95134 USA + Phone: +1 (408) 571 3500 + Fax: +1 (408) 571 3550 + Email: support@force10networks.com" + + DESCRIPTION + "Force10 Enterprise IF Extenstion MIB. " + + REVISION "200804071200Z" + DESCRIPTION + "Add f10IfOutThrottles." + + REVISION "200710031200Z" + DESCRIPTION + "Initial version of this mib module." + ::= { f10Mgmt 11 } + + + -- ### Groups ### + + f10IfExtensionMibObject OBJECT IDENTIFIER ::={ f10IfExtensionMib 1 } + f10IfExtensionParams OBJECT IDENTIFIER ::={ f10IfExtensionMibObject 1 } + f10IfExtensionStats OBJECT IDENTIFIER ::={ f10IfExtensionMibObject 2 } + + -- ### Force10 IF Extenstion Tables + + -- + -- Interface Table + -- + + f10IfTable OBJECT-TYPE + SYNTAX SEQUENCE OF F10IfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Force10 Extension ifTable contains + generic interface parameters." + ::= { f10IfExtensionParams 1 } + + f10IfEntry OBJECT-TYPE + SYNTAX F10IfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " A row defintion of Force10 Interface + Extension parameters." + INDEX { ifIndex } + ::= { f10IfTable 1 } + + F10IfEntry ::= + SEQUENCE { + f10IfIpMtu Unsigned32, + f10IfDuplexMode INTEGER, + f10IfQueueingStrategy DisplayString, + f10IfRxFlowCtrl TruthValue, + f10IfTxFlowCtrl TruthValue + } + + f10IfIpMtu OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP (Internet Protocol), Maximum + Transmission Unit value." + ::= { f10IfEntry 1 } + + f10IfDuplexMode OBJECT-TYPE + SYNTAX INTEGER { + half(1), + full(2), + auto(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Duplex mode of the interface." + ::= { f10IfEntry 2 } + + f10IfQueueingStrategy OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Queueing strategy used for packets." + ::= { f10IfEntry 3 } + + f10IfRxFlowCtrl OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Flow control receive." + ::= { f10IfEntry 4 } + + f10IfTxFlowCtrl OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Flow Control transmit." + ::= { f10IfEntry 5 } + + -- + -- Interface Statistics Table + -- + + f10IfStaticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF F10IfStaticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The statistcs information of the + interfaces for performance monitoring." + ::= { f10IfExtensionStats 1 } + + f10IfStaticsEntry OBJECT-TYPE + SYNTAX F10IfStaticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row defintion of Force10 Extension + interface statistics." + INDEX { ifIndex } + ::= { f10IfStaticsTable 1 } + + F10IfStaticsEntry ::= + SEQUENCE { + f10IfInVlanPkts Counter64, + f10IfIn64BytePkts Counter64, + f10ifIn65To127BytePkts Counter64, + f10IfIn128To255BytePkts Counter64, + f10IfIn256To511BytePkts Counter64, + f10IfIn512To1023BytePkts Counter64, + f10IfInOver1023BytePkts Counter64, + f10IfInThrottles Counter64, + f10IfInRunts Counter64, + f10IfInGiants Counter64, + f10IfInCRC Counter64, + f10IfInOverruns Counter64, + f10IfOutVlanPkts Counter64, + f10IfOutUnderruns Counter64, + f10IfOutUnicasts Counter64, + f10IfOutCollisions Counter64, + f10IfOutWredDrops Counter64, + f10IfOut64BytePkts Counter64, + f10IfOut65To127BytePkts Counter64, + f10IfOut128To255BytePkts Counter64, + f10IfOut256To511BytePkts Counter64, + f10IfOut512To1023BytePkts Counter64, + f10IfOutOver1023BytePkts Counter64, + f10IfOutThrottles Counter64, + f10IfLastDiscontinuityTime TimeStamp + } + + f10IfInVlanPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of valid VLAN Tagged + frames received." + ::= { f10IfStaticsEntry 1 } + + f10IfIn64BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames (including bad + frames) received that were 64 octets in length + (excluding framing bits but in-cluding FCS octets)." + ::= { f10IfStaticsEntry 2 } + + f10ifIn65To127BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames (including bad + frames) received that were between 65 and 127 + octets in length inclusive (ex-cluding framing + bits but including FCS octets)." + ::= { f10IfStaticsEntry 3 } + + f10IfIn128To255BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames (including bad + frames) received that were between 128 and 255 + octets in length inclusive (excluding framing + bits but including FCS octets)." + ::= { f10IfStaticsEntry 4 } + + f10IfIn256To511BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames (including bad + frames) received that were between 256 and 511 + octets in length inclusive (excluding framing + bits but including FCS octets)." + ::= { f10IfStaticsEntry 5 } + + f10IfIn512To1023BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames (including bad + frames) received that were between 512 and 1023 + octets in length inclusive (excluding framing + bits but including FCS octets)." + ::= { f10IfStaticsEntry 6 } + + f10IfInOver1023BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames received that + were longer than 1023 (1025 Bytes in case of + VLAN Tag) octets (excluding framing bits, but + including FCS octets) and were otherwise + well formed. This counter is not incremented + for too long frames." + ::= { f10IfStaticsEntry 7 } + + f10IfInThrottles OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter is incremented when a valid + frame with a length or type field value equal + to 0x8808 (Control Frame) is re-ceived." + ::= { f10IfStaticsEntry 8 } + + f10IfInRunts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames received that were + less than 64 octets long (excluding framing bits, + but including FCS octets) and were otherwise + well formed." + ::= { f10IfStaticsEntry 9 } + + f10IfInGiants OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames received that were + longer than 1518 (1522 Bytes in case of VLAN Tag) + octets (excluding framing bits, but including FCS + octets) and were otherwise well formed. This counter + is not incremented for too long frames." + ::= { f10IfStaticsEntry 10 } + + f10IfInCRC OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames received that had + a length (ex-cluding framing bits, but including + FCS octets) of between 64 and 1518 octets, + inclusive, but had a bad CRC." + ::= { f10IfStaticsEntry 11 } + + f10IfInOverruns OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames dropped because + of buffer issue." + ::= { f10IfStaticsEntry 12 } + + f10IfOutVlanPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Number of Good VLAN Tagged Frames sent + successfully." + ::= { f10IfStaticsEntry 13 } + + f10IfOutUnderruns OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames dropped because + of buffer underrun." + ::= { f10IfStaticsEntry 14 } + + f10IfOutUnicasts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Number of Good Unicast Frames sent successfully." + ::= { f10IfStaticsEntry 15 } + + f10IfOutCollisions OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the frames that due to excessive + or late collisions are not transmitted successfully." + ::= { f10IfStaticsEntry 16 } + + f10IfOutWredDrops OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the frames that are dropped using + WRED policy because of to excessive traffic." + ::= { f10IfStaticsEntry 17 } + + f10IfOut64BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Number of Good Frames sent successfully + whose size was 64 Bytes." + ::= { f10IfStaticsEntry 18 } + + f10IfOut65To127BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Number of Good Frames sent successfully + whose size was in the range of 65 to 127 Bytes." + ::= { f10IfStaticsEntry 19 } + + f10IfOut128To255BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Number of Good Frames sent successfully + whose size was in the range of 128 to 255 Bytes." + ::= { f10IfStaticsEntry 20 } + + f10IfOut256To511BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Number of Good Frames sent successfully + whose size was in the range of 256 to 511 Bytes." + ::= { f10IfStaticsEntry 21 } + + f10IfOut512To1023BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Number of Good Frames sent successfully + whose size was in the range of 512 to 1023 Bytes." + ::= { f10IfStaticsEntry 22 } + + f10IfOutOver1023BytePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Number of Good Frames sent successfully + whose size was greater than 1023 Bytes." + ::= { f10IfStaticsEntry 23 } + + f10IfOutThrottles OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter is incremented when a valid + frame with a length or type field value equal + to 0x8808 (Control Frame) is sent." + ::= { f10IfStaticsEntry 24 } + + f10IfLastDiscontinuityTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime on the most recent occasion + at which this interface's counters suffered a + discontinuity via a reset. If no such discontinuities + have occurred since the last reinitialization of + the local management subsystem, then this object + contains a zero value." + ::= { f10IfStaticsEntry 25 } + + + -- ### conformance information ### + f10IfExtensionMibConformance OBJECT IDENTIFIER ::= { f10IfExtensionMib 2 } + f10IfExtensionMibCompliances OBJECT IDENTIFIER ::= { f10IfExtensionMibConformance 1 } + f10IfExtensionMibGroups OBJECT IDENTIFIER ::= { f10IfExtensionMibConformance 2 } + + -- ## compliance statements + f10IfExtensionMibCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for Force10 + IF Extension MIB." + MODULE -- this module + MANDATORY-GROUPS { + f10IfParamsGroup, + f10IfStatsGroup + } + ::= { f10IfExtensionMibCompliances 1 } + + -- ## units of conformance + + f10IfParamsGroup OBJECT-GROUP + OBJECTS { + f10IfIpMtu, + f10IfDuplexMode, + f10IfQueueingStrategy, + f10IfRxFlowCtrl, + f10IfTxFlowCtrl + } + STATUS current + DESCRIPTION + "A collection of objects providing the + Force10 IF Extenstion parameters." + ::= { f10IfExtensionMibGroups 1 } + + f10IfStatsGroup OBJECT-GROUP + OBJECTS { + f10IfInVlanPkts, + f10IfIn64BytePkts, + f10ifIn65To127BytePkts, + f10IfIn128To255BytePkts, + f10IfIn256To511BytePkts, + f10IfIn512To1023BytePkts, + f10IfInOver1023BytePkts, + f10IfInThrottles, + f10IfInRunts, + f10IfInGiants, + f10IfInCRC, + f10IfInOverruns, + f10IfOutVlanPkts, + f10IfOutUnderruns, + f10IfOutUnicasts, + f10IfOutCollisions, + f10IfOutWredDrops, + f10IfOut64BytePkts, + f10IfOut65To127BytePkts, + f10IfOut128To255BytePkts, + f10IfOut256To511BytePkts, + f10IfOut512To1023BytePkts, + f10IfOutOver1023BytePkts, + f10IfOutThrottles, + f10IfLastDiscontinuityTime + } + STATUS current + DESCRIPTION + "A collection of objects providing the + interface statistics." + ::= { f10IfExtensionMibGroups 2 } + + END + |