summaryrefslogtreecommitdiff
path: root/MIBS/ekinops
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/ekinops')
-rw-r--r--MIBS/ekinops/EKINOPS-MGNT2-MIB4783
-rw-r--r--MIBS/ekinops/EKINOPS-MGNT2-NMS-MIB1531
-rw-r--r--MIBS/ekinops/EKINOPS-MIB167
3 files changed, 6481 insertions, 0 deletions
diff --git a/MIBS/ekinops/EKINOPS-MGNT2-MIB b/MIBS/ekinops/EKINOPS-MGNT2-MIB
new file mode 100644
index 0000000..b1840ba
--- /dev/null
+++ b/MIBS/ekinops/EKINOPS-MGNT2-MIB
@@ -0,0 +1,4783 @@
+-- *****************************************************************
+-- MGNT2.TXT: MIB
+--
+--MIB Part Number:3MI01002CABA
+--MIB Version:01
+--
+-- Copyright (c) 2017 by Ekinops
+-- All rights reserved.
+--
+-- *****************************************************************
+
+EKINOPS-MGNT2-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ ekinops,
+ EkiState,
+ EkiOnOff,
+ EkiProtocol,
+ EkiApiState,
+ EkiLoadGWSW,
+ EkiLoadState,
+ EkiLoadPermutMethod,
+ EkiSynchroMode,
+ EkiLoadPermutMode
+ FROM EKINOPS-MIB
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ NOTIFICATION-TYPE,
+ Unsigned32,
+ Integer32,
+ IpAddress
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION,
+ DisplayString,
+ RowStatus
+ FROM SNMPv2-TC;
+
+mgnt2 MODULE-IDENTITY
+ LAST-UPDATED "201701100000Z"
+ ORGANIZATION "Ekinops"
+ CONTACT-INFO
+ "Ekinops
+
+ 3, rue Blaise Pascal
+ F-22300 Lannion / FRANCE
+
+ Tel : +33 (0)2 96 05 00 30
+ Fax : +33 (0)2 96 48 62 39
+
+ E-mail: support@ekinops.net"
+ DESCRIPTION
+ "MIB for Ekinops 360 management."
+ REVISION "200511240000Z"
+ DESCRIPTION
+ "Initial version."
+ REVISION "200601240000Z"
+ DESCRIPTION
+ "Add the ekicraft package table."
+ REVISION "200603100000Z"
+ DESCRIPTION
+ "Change Rack full to Rack Not Full"
+ REVISION "200605100000Z"
+ DESCRIPTION
+ "Gateways are managed by a table"
+ REVISION "200605230000Z"
+ DESCRIPTION
+ "Replace PBU by PM"
+ REVISION "200609280000Z"
+ DESCRIPTION
+ "CRAFT/LINUX Inventory Insertion"
+ REVISION "200612130000Z"
+ DESCRIPTION
+ "Plug-in inventory table insertion"
+ REVISION "200702090000Z"
+ DESCRIPTION
+ "Add Backpanel ,Fan inventory and error counters"
+ REVISION "200704240000Z"
+ DESCRIPTION
+ "Add detailed traps"
+ REVISION "200706190000Z"
+ DESCRIPTION
+ "Add ABS3 objects"
+ REVISION "200708270000Z"
+ DESCRIPTION
+ "Add Groups number in board table for pm1008dc"
+ REVISION "200711270000Z"
+ DESCRIPTION
+ "Update Ekinops Address,Helps on objects,Add Dcc management"
+ REVISION "200805200000Z"
+ DESCRIPTION
+ "Add syslog and ntp servers ip addresses"
+ REVISION "200806180000Z"
+ DESCRIPTION
+ "Add Inactivity Time out"
+ REVISION "200808180000Z"
+ DESCRIPTION
+ "Add Cli access, create a textual convention for DCC access.Add Craft Access"
+ REVISION "200810070000Z"
+ DESCRIPTION
+ "Invert code on DCC mode"
+ REVISION "200811190000Z"
+ DESCRIPTION
+ "Insert Chassis Ethernet Split"
+ REVISION "200901050000Z"
+ DESCRIPTION
+ "Insert Chassis Global Conf"
+ REVISION "200912150000Z"
+ DESCRIPTION
+ "Correction on traps"
+ REVISION "201001040000Z"
+ DESCRIPTION
+ "Insert CRIT/URG/NURG/Acknowledge"
+ REVISION "201002160000Z"
+ DESCRIPTION
+ "Add CondType and NMS parameters"
+ REVISION "201007160000Z"
+ DESCRIPTION
+ "Add perf management for the NMS"
+ REVISION "201010270000Z"
+ DESCRIPTION
+ "Add new filters for traps"
+
+ REVISION "201103170000Z"
+ DESCRIPTION
+ "Add new filters for traps"
+ REVISION "201104070000Z"
+ DESCRIPTION
+ "New mode on new ehternet input"
+ REVISION "201104130000Z"
+ DESCRIPTION
+ "Polling Manager fail insertion"
+ REVISION "201105270000Z"
+ DESCRIPTION
+ "Rajout AlarmType sur Extraction Fan"
+ REVISION "201106080000Z"
+ DESCRIPTION
+ "Rajout Cold Reset"
+ REVISION "201106300000Z"
+ DESCRIPTION
+ "PerfCapStatus new type"
+ REVISION "201109120000Z"
+ DESCRIPTION
+ "New data for Atom"
+ REVISION "201202080000Z"
+ DESCRIPTION
+ "PM labelling removal"
+ REVISION "201203190000Z"
+ DESCRIPTION
+ "Add mgnt2SubFunctionLabel for 100G"
+ REVISION "201207160000Z"
+ DESCRIPTION
+ "Minor cosmetic updates"
+ REVISION "201305280000Z"
+ DESCRIPTION
+ "RSTP configuration object"
+ REVISION "201305300000Z"
+ DESCRIPTION
+ "Dust filter insertion, CPU Temp warning"
+ REVISION "201308290000Z"
+ DESCRIPTION
+ "LLDP configuration object"
+ REVISION "201309040000Z"
+ DESCRIPTION
+ "MGNT Shutdown adding"
+ REVISION "201309110000Z"
+ DESCRIPTION
+ "Log file mode insertion"
+ REVISION "201311060000Z"
+ DESCRIPTION
+ "RADIUS objects"
+ REVISION "201407300000Z"
+ DESCRIPTION
+ "Node Controller objects"
+ REVISION "201409010000Z"
+ DESCRIPTION
+ "Probcause,AlarmType - NMS completion"
+ REVISION "201502110000Z"
+ DESCRIPTION
+ "HTTP configuration"
+ REVISION "201504010000Z"
+ DESCRIPTION
+ "Add bindings for Node Controller"
+ REVISION "201504140000Z"
+ DESCRIPTION
+ "RSTP Thresholds"
+ REVISION "201504140000Z"
+ DESCRIPTION
+ "Users privilege"
+ REVISION "201510090000Z"
+ DESCRIPTION
+ "Add in mgnt2SlotStatus"
+ REVISION "201511050000Z"
+ DESCRIPTION
+ "Appropriate Limits on SYNTAX of some OBJECT-TYPE "
+ REVISION "201605270000Z"
+ DESCRIPTION
+ "Add objects for fail login attemps"
+ REVISION "201606150000Z"
+ DESCRIPTION
+ "Removable Fan modules handling"
+ REVISION "201610120000Z"
+ DESCRIPTION
+ "Modification of numbering of the fans"
+ REVISION "201701100000Z"
+ DESCRIPTION
+ "FTP, TFTP enable disable"
+ ::= { ekinops 7 }
+
+--- *****************************************************
+--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
+--- TEXTUAL-CONVENTION
+--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
+--- *****************************************************
+
+Mgnt2CliAccessValues ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "different type of access by ethernet for the CLI"
+ SYNTAX INTEGER {
+ noCliByEthernet(0),
+ cliBySSH(1),
+ cliByTelnet(2)
+ }
+
+Mgnt2CraftAccessValues ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "enables access to the CRAFT"
+ SYNTAX INTEGER {
+ noCraftAccess(0),
+ craftEnable(1),
+ craftEnableHttps(2)
+ }
+
+Mgnt2DccAccessValues ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "different modes for the Dcc access"
+ SYNTAX INTEGER {
+ mode1Slots2s4s6s8s10(0),
+ mode2Slots2s6s10s14s18(1)
+ }
+
+Mgnt2TrapModeValues ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "different modes for the trap generation"
+ SYNTAX INTEGER {
+ syntheticTrap(0),
+ detailedTrap(1),
+ nmsTrap(2)
+ }
+
+Mgnt2AckMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "different modes to acknowledge alarms"
+ SYNTAX INTEGER {
+ modeA(1),
+ modeB(2)
+ }
+
+Mgnt2PerfResyncValues ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "different modes for the trap generation"
+ SYNTAX INTEGER {
+ perfResyncIdle(1),
+ perfResyncSync(2),
+ perfResyncReady(3),
+ perfResyncDelete(4)
+ }
+
+Mgnt2NetMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "different modes for the network management"
+ SYNTAX INTEGER {
+ switch(1),
+ gateway(2)
+ }
+
+Mgnt2MasterEthMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "different modes for the Master"
+ SYNTAX INTEGER {
+ static(1),
+ dhcp(2)
+ }
+
+Mgnt2SubnetEthMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "different modes for the Subnet"
+ SYNTAX INTEGER {
+ static(1),
+ dhcp(2)
+ }
+
+Mgnt2AuthTypeValues ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Various types of authentication processes"
+ SYNTAX INTEGER {
+ authLocal(0),
+ authRADIUS(1),
+ authLDAP(2)
+ }
+
+Mgnt2LogFileMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "different modes for the log files"
+ SYNTAX INTEGER {
+ disabled (0),
+ linear(1),
+ rotary(2)
+ }
+
+
+Mgnt2SlotStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Status of the slot"
+ SYNTAX INTEGER {
+ slotEmpty(0),
+ pmReady(1),
+ pmReset(2),
+ pmLoad(3),
+ pmPassive(4),
+ pmUnknown(5),
+ pmNotReady(6)
+ }
+
+
+
+
+
+-- *****************************************************************
+--
+-- MGNT2 MIB root mapping
+--
+-- *****************************************************************
+mgnt2SNMPAgentData OBJECT IDENTIFIER ::= { mgnt2 1 }
+mgnt2Hardware OBJECT IDENTIFIER ::= { mgnt2 2}
+mgnt2Traps OBJECT IDENTIFIER ::= { mgnt2 3}
+mgnt2SoftwareManagement OBJECT IDENTIFIER ::= { mgnt2 4}
+mgnt2ConfigManagement OBJECT IDENTIFIER ::= { mgnt2 5}
+mgnt2RemoteInventory OBJECT IDENTIFIER ::= { mgnt2 6}
+mgnt2ErrorCounters OBJECT IDENTIFIER ::= { mgnt2 7}
+mgnt2Perf OBJECT IDENTIFIER ::= { mgnt2 8}
+
+-- *****************************************************************
+--
+-- MGNT2 SNMP Agent informations
+--
+-- *****************************************************************
+
+mgnt2IPmanagment OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 1 }
+
+
+mgnt2GigmManagerIpAddressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2GigmManagerIpAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Manager IP address Table."
+ ::= { mgnt2IPmanagment 1 }
+
+mgnt2GigmManagerIpAddressEntry OBJECT-TYPE
+ SYNTAX Mgnt2GigmManagerIpAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX { mgnt2GigmManagerIpIndex }
+ ::= { mgnt2GigmManagerIpAddressTable 1 }
+
+Mgnt2GigmManagerIpAddressEntry ::= SEQUENCE {
+ mgnt2GigmManagerIpIndex Integer32,
+ mgnt2GigmManagerIpAddress IpAddress,
+ mgnt2GigmManagerIpAddressTableRowStatus RowStatus,
+ mgnt2GigmManagerTrapPort Integer32,
+ mgnt2GigmManagerEnableCtrl EkiOnOff,
+ mgnt2GigmManagerEnableConfig EkiOnOff,
+ mgnt2GigmManagerEnableEvent EkiOnOff,
+ mgnt2GigmManagerEnableAlarmCrit EkiOnOff,
+ mgnt2GigmManagerEnableAlarmMajor EkiOnOff,
+ mgnt2GigmManagerEnableAlarmMinor EkiOnOff,
+ mgnt2GigmManagerRegistrationTimeout Integer32,
+ mgnt2GigmManagerEnableAlarmWarning EkiOnOff,
+ mgnt2GigmManagerEnableAlarmIndeterminate EkiOnOff
+}
+
+mgnt2GigmManagerIpIndex OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Index of the IP address of the manager"
+ ::= { mgnt2GigmManagerIpAddressEntry 1 }
+
+mgnt2GigmManagerIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP address of the manager:This OID defines the IP
+ address of the SNMP Manager attached to the Mgnt2"
+ ::= { mgnt2GigmManagerIpAddressEntry 2 }
+
+mgnt2GigmManagerIpAddressTableRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this row."
+ ::= { mgnt2GigmManagerIpAddressEntry 3 }
+
+mgnt2GigmManagerTrapPort OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Manager UDP port."
+ ::= { mgnt2GigmManagerIpAddressEntry 4 }
+
+mgnt2GigmManagerEnableCtrl OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enabling trap of Ctrl."
+ ::= { mgnt2GigmManagerIpAddressEntry 5 }
+
+mgnt2GigmManagerEnableConfig OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enabling trap of config."
+ ::= { mgnt2GigmManagerIpAddressEntry 6 }
+
+mgnt2GigmManagerEnableEvent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enabling trap of event."
+ ::= { mgnt2GigmManagerIpAddressEntry 7 }
+
+mgnt2GigmManagerEnableAlarmCrit OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enabling trap of crit alarm."
+ ::= { mgnt2GigmManagerIpAddressEntry 8 }
+
+mgnt2GigmManagerEnableAlarmMajor OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enabling trap of major alarm."
+ ::= { mgnt2GigmManagerIpAddressEntry 9 }
+
+mgnt2GigmManagerEnableAlarmMinor OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enabling trap of minor alarm."
+ ::= { mgnt2GigmManagerIpAddressEntry 10 }
+
+
+mgnt2GigmManagerRegistrationTimeout OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Time-out for manager activities."
+ ::= { mgnt2GigmManagerIpAddressEntry 11 }
+
+mgnt2GigmManagerEnableAlarmWarning OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enabling trap of warning alarm."
+ ::= { mgnt2GigmManagerIpAddressEntry 12 }
+
+mgnt2GigmManagerEnableAlarmIndeterminate OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enabling trap of indeterminate alarm."
+ ::= { mgnt2GigmManagerIpAddressEntry 13 }
+
+
+mgnt2GigmBoardIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP address of the Chassis:This OID defines the IP
+ address of the Mgnt2"
+ ::= { mgnt2IPmanagment 2 }
+
+mgnt2GigmIPAddresByDHCP OBJECT-TYPE
+ SYNTAX EkiState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP address retrieved by DHCP:If enabled, the IP
+ address is retrieved by DHCP, in which case changes
+ take effect after a board reset. If disabled the
+ object, mgnt2GigmBoardIpAddress defines the address"
+ ::= { mgnt2IPmanagment 3 }
+
+
+mgnt2GigmNetmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Netmask for the board IP address:This OID defined
+ the IP Subnet mask of the Mgnt2"
+ ::= { mgnt2IPmanagment 4 }
+
+mgnt2GigmGatewayAddressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2GigmGatewayAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Gateway IP address Table: This table contains all
+ the gateway IP addresses."
+ ::= { mgnt2IPmanagment 5 }
+
+mgnt2GigmGatewayAddressEntry OBJECT-TYPE
+ SYNTAX Mgnt2GigmGatewayAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX { mgnt2GigmGatewayIndex }
+ ::= { mgnt2GigmGatewayAddressTable 1 }
+
+Mgnt2GigmGatewayAddressEntry ::= SEQUENCE {
+ mgnt2GigmGatewayIndex Integer32,
+ mgnt2GigmGatewayAddress IpAddress,
+ mgnt2GigmGatewayOrder Integer32
+}
+
+mgnt2GigmGatewayIndex OBJECT-TYPE
+ SYNTAX Integer32(0..1)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Index of the IP address of the gateway"
+ ::= { mgnt2GigmGatewayAddressEntry 1 }
+
+mgnt2GigmGatewayAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP address of the gateway :This OID defines the IP
+ address of the gateway attached to the Chassis"
+ ::= { mgnt2GigmGatewayAddressEntry 2 }
+
+mgnt2GigmGatewayOrder OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Gateway priority: This OID defines the priority of
+ the gateway (lower number for higher priority)"
+ ::= { mgnt2GigmGatewayAddressEntry 3 }
+
+mgnt2GigmSyslog OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP address of the syslog server:This OID defines
+ the IP address of the syslog of the Mgnt2"
+ ::= { mgnt2IPmanagment 6 }
+
+mgnt2GigmNtpServer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP address of the ntp server:This OID defines
+ the IP address of the ntp server for the Mgnt2"
+ ::= { mgnt2IPmanagment 7 }
+
+
+mgnt2GigmNodeIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Node IP address :This OID defines
+ the Node IP address in node controller mode for the Mgnt2"
+ ::= { mgnt2IPmanagment 8 }
+
+
+mgnt2ModulesManagement OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 2 }
+
+mgnt2GigmBoardTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2GigmBoardEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "List of PMs plugged in the Chassis"
+ ::= { mgnt2ModulesManagement 1 }
+
+mgnt2GigmBoardEntry OBJECT-TYPE
+ SYNTAX Mgnt2GigmBoardEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Row Definition for the PMs table"
+ INDEX { mgnt2IndexBoards }
+ ::= { mgnt2GigmBoardTable 1 }
+
+
+
+Mgnt2GigmBoardEntry ::=
+ SEQUENCE {
+ mgnt2IndexBoards
+ Integer32,
+ mgnt2Position
+ Integer32,
+ mgnt2Name
+ DisplayString,
+ mgnt2PortNumber
+ Integer32,
+ mgnt2LineNumber
+ Integer32,
+ mgnt2GroupNumber
+ Integer32,
+ mgnt2RootOIDInventory
+ OBJECT IDENTIFIER,
+ mgnt2SlotOcc
+ DisplayString,
+ mgnt2SubFunctionLabel
+ DisplayString,
+ mgnt2SlotStatus
+ Mgnt2SlotStatus
+ }
+
+
+ mgnt2IndexBoards OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Index for PMs table"
+ ::= { mgnt2GigmBoardEntry 1 }
+
+ mgnt2Position OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PM Slot number:This OID gives the slot number in
+ which the PM is plugged"
+ ::= { mgnt2GigmBoardEntry 2 }
+
+ mgnt2Name OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PM name:This OID gives the name of the PM plugged
+ in the Mgnt2"
+ ::= { mgnt2GigmBoardEntry 3 }
+
+ mgnt2PortNumber OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Client Ports:This OID gives the number of
+ client ports on the PM plugged in the Mgnt2"
+ ::= { mgnt2GigmBoardEntry 4 }
+
+ mgnt2LineNumber OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Line Ports:This OID gives the number of line
+ ports on the PM plugged in the Mgnt2"
+ ::= { mgnt2GigmBoardEntry 5 }
+
+ mgnt2GroupNumber OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Groups:This OID gives the number of group
+ of clients on the PM plugged in the Mgnt2"
+ ::= { mgnt2GigmBoardEntry 6 }
+
+ mgnt2RootOIDInventory OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "root oid of the inventory leaf of the corresponding PM"
+ ::= { mgnt2GigmBoardEntry 7 }
+
+ mgnt2SlotOcc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PM Slot occupied:This OID gives the slots taken
+ by this PM"
+ ::= { mgnt2GigmBoardEntry 8 }
+
+
+ mgnt2SubFunctionLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sub Function Label: This OID gives the name of the sub
+ function embedded on the Chassis. (applied only on the
+ 100G Chassis)"
+ ::= { mgnt2GigmBoardEntry 9 }
+
+
+
+ mgnt2SlotStatus OBJECT-TYPE
+ SYNTAX Mgnt2SlotStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Slot Status: This OID gives the status of the slot
+ in the Chassis: See Textual COnvention"
+ ::= { mgnt2GigmBoardEntry 10 }
+
+
+
+mgnt2GigmSelectedBoard OBJECT-TYPE
+ SYNTAX INTEGER(1..256)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "PM Slot number selected:PM selected for further
+ operations in the Ekinops module board tree. This
+ number is the slot number."
+ ::= { mgnt2ModulesManagement 7 }
+
+
+
+
+mgnt2GigmMibsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2GigmMibsEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "List of MIBs supported by the Chassis SNMPAgent"
+ ::= { mgnt2SNMPAgentData 4 }
+
+mgnt2GigmMibsEntry OBJECT-TYPE
+ SYNTAX Mgnt2GigmMibsEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "Row definition for MIBs table"
+ INDEX { mgnt2IndexMibs }
+ ::= { mgnt2GigmMibsTable 1 }
+
+
+
+Mgnt2GigmMibsEntry ::=
+ SEQUENCE {
+ mgnt2IndexMibs
+ Integer32,
+ mgnt2MibName
+ DisplayString,
+ mgnt2MibPartNumber
+ DisplayString
+ }
+
+
+ mgnt2IndexMibs OBJECT-TYPE
+ SYNTAX Integer32(1..100)
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "Index for MIBs table"
+ ::= { mgnt2GigmMibsEntry 1 }
+
+ mgnt2MibName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "MIB name:This OID gives the name of the MIBs
+ supported by the SNMP Agent"
+ ::= { mgnt2GigmMibsEntry 2 }
+
+ mgnt2MibPartNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "MIB Part Number:This OID gives the part number of the MIBs
+ supported by the SNMP Agent"
+ ::= { mgnt2GigmMibsEntry 3 }
+
+mgnt2GigmLogicalName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Mgnt2 name:This OID defines the name of the Mgnt2"
+ ::= { mgnt2SNMPAgentData 5 }
+
+mgnt2GigmEqptType OBJECT-TYPE
+ SYNTAX Integer32(1..128)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Equipment type:This OID defines the type of the Equipment"
+ ::= { mgnt2SNMPAgentData 6 }
+
+mgnt2GigmTrapCount OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 7 }
+
+mgnt2GigmTrapCounter OBJECT-TYPE
+ SYNTAX Integer32(1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Trap counter:This OID counts the number of trap sent"
+ ::= { mgnt2GigmTrapCount 1 }
+
+mgnt2GigmResetTrapCounter OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Reset trap counter:This OID reset the trap counter to 0"
+ ::= { mgnt2GigmTrapCount 2 }
+
+
+mgnt2GigmSecurity OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 8 }
+
+mgnt2GigmRoCommunity OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Get community:This OID defines the community for the
+ SNMP Get function"
+ ::= { mgnt2GigmSecurity 1 }
+
+mgnt2GigmRwCommunity OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Set community:This OID defines the community for the
+ SNMP Set function"
+ ::= { mgnt2GigmSecurity 2 }
+
+
+mgnt2GigmTrapCommunity OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap community:This OID defines the community for the
+ SNMP Trap function"
+ ::= { mgnt2GigmSecurity 3 }
+
+
+mgnt2GigmTime OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 9 }
+
+mgnt2GigmCurrentHour OBJECT-TYPE
+ SYNTAX INTEGER(0..23)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis Hour time:This OID defines the hour of the chassis' time"
+ ::= { mgnt2GigmTime 1 }
+
+mgnt2GigmCurrentMinute OBJECT-TYPE
+ SYNTAX INTEGER(0..59)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis Minute time:This OID defines the minute of the chassis' time"
+ ::= { mgnt2GigmTime 2 }
+
+mgnt2GigmCurrentYear OBJECT-TYPE
+ SYNTAX INTEGER(1970..3000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis year date:This OID defines the year of the chassis' date"
+ ::= { mgnt2GigmTime 3 }
+
+mgnt2GigmCurrentMonth OBJECT-TYPE
+ SYNTAX INTEGER(1..12)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis month date:This OID defines the month of the chassis' date"
+ ::= { mgnt2GigmTime 4 }
+
+mgnt2GigmCurrentDay OBJECT-TYPE
+ SYNTAX INTEGER(1..31)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis day date:This OID defines the day of the chassis' date"
+ ::= { mgnt2GigmTime 5 }
+
+
+
+mgnt2Authentication OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 10 }
+
+mgnt2GigmRadiusServer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP address of the RADIUS server:This OID defines
+ the IP address of the external RADIUS server for authentication"
+ ::= { mgnt2Authentication 1 }
+
+mgnt2GigmRadiusPort OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "TCP port number of the RADIUS server:This OID defines
+ the TCP port number of the external RADIUS server for
+ authentication"
+ ::= { mgnt2Authentication 2 }
+
+mgnt2GigmRadiusSecret OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Shared secret of the RADIUS server:This OID defines
+ the shared secret password of the RADIUS server for
+ authentication"
+ ::= { mgnt2Authentication 3 }
+
+
+mgnt2GigmLdapHost OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "IP address of the LDAP host:This OID defines
+ the IP address of the external LDAP server for authentication"
+ ::= { mgnt2Authentication 4 }
+
+mgnt2GigmLdapPort OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "TCP port number of the LDAP server:This OID defines
+ the TCP port number of the external LDAP server for
+ authentication"
+ ::= { mgnt2Authentication 5 }
+
+
+mgnt2GigmLdapBase OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "LDAP base:This OID defines the name of the search
+ base of the LDAP server for
+ authentication<Help>LDAP base name spelled as follows:
+ 'ou=users,ou=network,dc=yourcompany,dc=net'"
+ ::= { mgnt2Authentication 6 }
+
+mgnt2GigmLdapVersion OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Protocol number in use by the LDAP server:This OID defines
+ the protocol version used by the external LDAP server for
+ authentication<Help>Protocol version used by the external LDAP
+ server for authentication"
+ ::= { mgnt2Authentication 7 }
+
+mgnt2GigmLdapBindDn OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "LDAP Bind DN:This OID defines the login name used to connect
+ into the LDAP server base for
+ authentication<Help>LDAP binddn spelled as follows:
+ 'cn=ldap_admin,dc=yourcompany,dc=net'"
+ ::= { mgnt2Authentication 8 }
+
+mgnt2GigmLdapBindPw OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Credentials to bind the LDAP server with:This OID defines
+ the credentials to bind the LDAP server with for
+ authentication<Help>Credentials for LDAP access (bindpw)"
+ ::= { mgnt2Authentication 9 }
+
+
+mgnt2GigmLdapScope OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Scope for LDAP base search:This OID defines
+ the search scope for an LDAP base search
+ <Help>LDAP search scope"
+ ::= { mgnt2Authentication 10 }
+
+mgnt2GigmLdapPamPasswd OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "PAM password handling:This OID defines
+ the way the PAM password is handled for LDAP authentication
+ <Help>The 'pam_password' option sould be one of the following:
+ 'clear', 'crypt', 'md5', 'racf', 'exop'"
+ ::= { mgnt2Authentication 11 }
+
+mgnt2GigmAuthenticationType OBJECT-TYPE
+ SYNTAX Mgnt2AuthTypeValues
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Authentication type in use"
+ ::= { mgnt2Authentication 12 }
+
+
+-- *****************************************************************
+--
+-- MGNT2 Software Management tables
+--
+-- *****************************************************************
+
+mgnt2DwlUploadingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2DwlUploadingEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "SNMP Agent SW packages in ram: List of the SNMP
+ agent software packages available in /ram for
+ download on the Chassis managment module flash"
+ ::= { mgnt2SoftwareManagement 1 }
+
+mgnt2DwlUploadingEntry OBJECT-TYPE
+ SYNTAX Mgnt2DwlUploadingEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Row definition for the package uploading table"
+ INDEX { mgnt2IndexUpload }
+ ::= { mgnt2DwlUploadingTable 1 }
+
+Mgnt2DwlUploadingEntry::=
+ SEQUENCE {
+ mgnt2IndexUpload
+ Integer32,
+ mgnt2DwlUploadFileName
+ DisplayString,
+ mgnt2ImmediateReplacement
+ EkiState,
+ mgnt2FileUpload
+ EkiOnOff,
+ mgnt2DeletePackageFromRam
+ EkiOnOff,
+ mgnt2FlashingInProgress
+ EkiOnOff
+ }
+
+ mgnt2IndexUpload OBJECT-TYPE
+ SYNTAX Integer32(0..4)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Index for uploading table"
+ ::= { mgnt2DwlUploadingEntry 1 }
+
+ mgnt2DwlUploadFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Package filename in RAM:This OID gives the name of
+ the SNMP agent software packages in RAM"
+ ::= { mgnt2DwlUploadingEntry 2 }
+
+ mgnt2ImmediateReplacement OBJECT-TYPE
+ SYNTAX EkiState
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Immediat Agent Replacement:This OID indicates to
+ switch to selected SNMP agent immediately or after
+ reset of the MGNT2"
+ ::= { mgnt2DwlUploadingEntry 3 }
+
+ mgnt2FileUpload OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Agent File Upload:This OID validates the upload of
+ the SNMP agent from RAM to FLASH"
+ ::= { mgnt2DwlUploadingEntry 4 }
+
+ mgnt2DeletePackageFromRam OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Delete Package from RAM:This OID requests to delete
+ the SNMP Agent SW package from RAM"
+ ::= { mgnt2DwlUploadingEntry 5 }
+
+ mgnt2FlashingInProgress OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Flashing in Progress:This OID indicates whether there
+ is a file upload to FLASH in progress"
+ ::= { mgnt2DwlUploadingEntry 6 }
+
+
+
+mgnt2DwlPackageTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2DwlPackageEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "List of SNMP agent software packages
+ present in flash memory"
+ ::= { mgnt2SoftwareManagement 2 }
+
+mgnt2DwlPackageEntry OBJECT-TYPE
+ SYNTAX Mgnt2DwlPackageEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Row definition for the package management table"
+ INDEX { mgnt2IndexPackage }
+ ::= { mgnt2DwlPackageTable 1 }
+
+Mgnt2DwlPackageEntry::=
+ SEQUENCE {
+ mgnt2IndexPackage
+ Integer32,
+ mgnt2DwlPackageFileName
+ DisplayString,
+ mgnt2ExtractedPack
+ EkiOnOff,
+ mgnt2SwitchTo
+ EkiOnOff,
+ mgnt2Immediate
+ EkiOnOff,
+ mgnt2DeletePackageFromFlash
+ EkiOnOff,
+ mgnt2PackageExtractionInProgress
+ EkiOnOff
+ }
+
+ mgnt2IndexPackage OBJECT-TYPE
+ SYNTAX Integer32(0..4)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Index for package management table"
+ ::= { mgnt2DwlPackageEntry 1 }
+
+ mgnt2DwlPackageFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Package File name in FLASH:This OID gives the name
+ of the SNMP agent software package in FLASH"
+ ::= { mgnt2DwlPackageEntry 2 }
+
+ mgnt2ExtractedPack OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Extracted SNMP agent software pack.: Indicates
+ whether the package is currently extracted in the FLASH.
+ If it is, it must not be deleted"
+ ::= { mgnt2DwlPackageEntry 3 }
+
+ mgnt2SwitchTo OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Switch to package:This OID activates the SNMP Agent
+ Software package"
+ ::= { mgnt2DwlPackageEntry 4 }
+
+ mgnt2Immediate OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Immediate SNMP agent activation: This OID indicates
+ whether the package is scheduled for immediate
+ activation or activation will take place following the
+ next reset"
+ ::= { mgnt2DwlPackageEntry 5 }
+
+ mgnt2DeletePackageFromFlash OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Delete package from FLASH:This OID deletes the SNMP
+ agent software package from the FLASH"
+ ::= { mgnt2DwlPackageEntry 6 }
+
+ mgnt2PackageExtractionInProgress OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Package extraction in progress:This OID indicates that
+ a SNMP agent software activation is in progress"
+ ::= { mgnt2DwlPackageEntry 7 }
+
+mgnt2DwlUploadingTableUpdate OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Uploading Table update:This OID updates the contents of
+ the uploading table"
+ ::= { mgnt2SoftwareManagement 3 }
+
+
+
+
+mgnt2LoadPMTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2LoadPMEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "List of the PM module software files (GW/SW)
+ present on the repository"
+ ::= { mgnt2SoftwareManagement 4 }
+
+
+mgnt2LoadPMEntry OBJECT-TYPE
+ SYNTAX Mgnt2LoadPMEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Row definition for the LOAD article table"
+ INDEX { mgnt2LoadPMIndex }
+ ::= { mgnt2LoadPMTable 1 }
+
+Mgnt2LoadPMEntry::=
+ SEQUENCE {
+ mgnt2LoadPMIndex
+ Integer32,
+ mgnt2LoadFileName
+ DisplayString,
+ mgnt2LoadFileType
+ EkiLoadGWSW,
+ mgnt2LoadState
+ EkiLoadState,
+ mgnt2LoadModuleNumber
+ Integer32,
+ mgnt2LoadResetMethod
+ EkiLoadPermutMethod,
+ mgnt2LoadResetMode
+ EkiLoadPermutMode,
+ mgnt2LoadBankNumber
+ Integer32,
+ mgnt2LoadDownloadProgress
+ Integer32,
+ mgnt2LoadTransfer
+ EkiOnOff,
+ mgnt2LoadDelete
+ EkiOnOff
+ }
+
+ mgnt2LoadPMIndex OBJECT-TYPE
+ SYNTAX Integer32(0..32)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Index for Load article table"
+ ::= { mgnt2LoadPMEntry 1 }
+
+ mgnt2LoadFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "PM Upgrade filename:This OID gives the name of
+ the file"
+ ::= { mgnt2LoadPMEntry 2 }
+
+ mgnt2LoadFileType OBJECT-TYPE
+ SYNTAX EkiLoadGWSW
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "PM upgrade file type:This OID gives the type of
+ file (gateware or software)"
+ ::= { mgnt2LoadPMEntry 3 }
+
+ mgnt2LoadState OBJECT-TYPE
+ SYNTAX EkiLoadState
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "PM upgrade status:This OID gives the status of the
+ selected Load file"
+ ::= { mgnt2LoadPMEntry 4 }
+
+ mgnt2LoadModuleNumber OBJECT-TYPE
+ SYNTAX Integer32(1..8)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "PM ugprade target:This OID defines the slot number
+ of the PM to upgrade"
+ ::= { mgnt2LoadPMEntry 5 }
+
+ mgnt2LoadResetMethod OBJECT-TYPE
+ SYNTAX EkiLoadPermutMethod
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "PM upgrade reset method:This OID defines the reset
+ method (manual, immediate or scheduled)"
+ ::= { mgnt2LoadPMEntry 6 }
+
+ mgnt2LoadResetMode OBJECT-TYPE
+ SYNTAX EkiLoadPermutMode
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "PM upgrade reset mode:This OID defines the type of
+ reset (cold or warm)"
+ ::= { mgnt2LoadPMEntry 7 }
+
+ mgnt2LoadBankNumber OBJECT-TYPE
+ SYNTAX Integer32(0..4)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "PM upgrade bank number:This OID defines the target
+ bank number in the PM's flash"
+ ::= { mgnt2LoadPMEntry 8 }
+
+ mgnt2LoadDownloadProgress OBJECT-TYPE
+ SYNTAX Integer32(0..100)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "PM upgrade progress:This OID gives the upgrade
+ progress (percentage)"
+ ::= { mgnt2LoadPMEntry 9 }
+
+ mgnt2LoadTransfer OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "PM upgrade transfer:This OID launchs the transfer
+ of the associated file to the selected PM's flash"
+ ::= { mgnt2LoadPMEntry 10 }
+
+ mgnt2LoadDelete OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "PM upgrade delete file:This OID deletes the
+ associated file from the RAM of the management board"
+ ::= { mgnt2LoadPMEntry 11 }
+
+
+mgnt2LoadPMTableUpdate OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Load PM Table update:This OID updates the contents
+ of the Load table"
+ ::= { mgnt2SoftwareManagement 5 }
+
+
+
+mgnt2DwlEkicraftPkgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2DwlEkicraftPkgEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "List of Ekicraft software packages
+ present in flash memory"
+ ::= { mgnt2SoftwareManagement 6 }
+
+mgnt2DwlEkicraftPkgEntry OBJECT-TYPE
+ SYNTAX Mgnt2DwlEkicraftPkgEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Row definition for the package management table"
+ INDEX { mgnt2IndexEkicraftPkg }
+ ::= { mgnt2DwlEkicraftPkgTable 1 }
+
+Mgnt2DwlEkicraftPkgEntry::=
+ SEQUENCE {
+ mgnt2IndexEkicraftPkg
+ Integer32,
+ mgnt2DwlEkicraftPkgFileName
+ DisplayString,
+ mgnt2DwlEkicraftExtractedPack
+ EkiOnOff,
+ mgnt2DwlEkicraftSwitchTo
+ EkiOnOff,
+ mgnt2DwlEkicraftImmediate
+ EkiOnOff,
+ mgnt2DeleteEkicraftPkgFromFlash
+ EkiOnOff,
+ mgnt2EkicraftPkgExtractionInProgress
+ EkiOnOff
+ }
+
+ mgnt2IndexEkicraftPkg OBJECT-TYPE
+ SYNTAX Integer32(0..4)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Index for Ekicraft package management table"
+ ::= { mgnt2DwlEkicraftPkgEntry 1 }
+
+ mgnt2DwlEkicraftPkgFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Package File name in FLASH:This OID gives the name
+ of the Ekicraft software package in FLASH"
+ ::= { mgnt2DwlEkicraftPkgEntry 2 }
+
+ mgnt2DwlEkicraftExtractedPack OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Extracted Ekicraft software pack.: Indicates
+ whether the package is currently extracted in the FLASH.
+ If it is, it must not be deleted"
+ ::= { mgnt2DwlEkicraftPkgEntry 3 }
+
+ mgnt2DwlEkicraftSwitchTo OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Switch to package:This OID activates the Ekicraft
+ Software package"
+ ::= { mgnt2DwlEkicraftPkgEntry 4 }
+
+ mgnt2DwlEkicraftImmediate OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Immediate Ekicraft activation: This OID indicates
+ whether the package is scheduled for immediate
+ activation or activation will take place following the
+ next reset"
+ ::= { mgnt2DwlEkicraftPkgEntry 5 }
+
+ mgnt2DeleteEkicraftPkgFromFlash OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Delete package from FLASH:This OID deletes the Ekicraft
+ software package from the FLASH"
+ ::= { mgnt2DwlEkicraftPkgEntry 6 }
+
+ mgnt2EkicraftPkgExtractionInProgress OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Package extraction in progress:This OID indicates that
+ an Ekicraft activation is in progress"
+ ::= { mgnt2DwlEkicraftPkgEntry 7 }
+
+
+-- *****************************************************************
+--
+-- Config management tables
+--
+-- *****************************************************************
+
+mgnt2CnfUploadConfigFilesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2CnfUploadConfigFilesEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "List of configuration files uploaded to RAM"
+ ::= { mgnt2ConfigManagement 1 }
+
+mgnt2CnfUploadConfigFilesEntry OBJECT-TYPE
+ SYNTAX Mgnt2CnfUploadConfigFilesEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Row definition for the package uploading table"
+ INDEX { mgnt2CnfUploadConfigIndex }
+ ::= { mgnt2CnfUploadConfigFilesTable 1 }
+
+Mgnt2CnfUploadConfigFilesEntry::=
+ SEQUENCE {
+ mgnt2CnfUploadConfigIndex
+ Integer32,
+ mgnt2CnfConfigFileName
+ DisplayString,
+ mgnt2CnfConfigSlot
+ Integer32,
+ mgnt2CnfConfigUpload
+ EkiOnOff,
+ mgnt2CnfDeleteConfigFile
+ EkiOnOff
+ }
+
+ mgnt2CnfUploadConfigIndex OBJECT-TYPE
+ SYNTAX Integer32(0..16)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Index of config files"
+ ::= { mgnt2CnfUploadConfigFilesEntry 1 }
+
+ mgnt2CnfConfigFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration filename in RAM:This OID gives the
+ name of the configuration file in RAM"
+ ::= { mgnt2CnfUploadConfigFilesEntry 2 }
+
+ mgnt2CnfConfigSlot OBJECT-TYPE
+ SYNTAX Integer32(0..3)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration target:This OID defines the target
+ slot number for the configuration file"
+ ::= { mgnt2CnfUploadConfigFilesEntry 3 }
+
+ mgnt2CnfConfigUpload OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration Upload:This OID uploads the
+ configuration file to the specified slot number
+ in the PM FLASH"
+ ::= { mgnt2CnfUploadConfigFilesEntry 4 }
+
+ mgnt2CnfDeleteConfigFile OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration delete from RAM:This OID deletes the
+ configuration file from RAM"
+ ::= { mgnt2CnfUploadConfigFilesEntry 5 }
+
+
+
+
+mgnt2CnfManageConfigFilesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2CnfManageConfigFilesEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "List of configuration files uploaded to RAM"
+ ::= { mgnt2ConfigManagement 2 }
+
+mgnt2CnfManageConfigFilesEntry OBJECT-TYPE
+ SYNTAX Mgnt2CnfManageConfigFilesEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Row definition for the package uploading table"
+ INDEX { mgnt2CnfManageConfigIndex }
+ ::= { mgnt2CnfManageConfigFilesTable 1 }
+
+Mgnt2CnfManageConfigFilesEntry::=
+ SEQUENCE {
+ mgnt2CnfManageConfigIndex
+ Integer32,
+ mgnt2CnfManageConfigFileID
+ DisplayString,
+ mgnt2CnfManageConfigFileName
+ DisplayString,
+ mgnt2CnfModuleSlotNumber
+ Integer32,
+ mgnt2CnfBackupConfig
+ EkiOnOff,
+ mgnt2CnfRestoreConfig
+ EkiOnOff,
+ mgnt2CnfExportConfig
+ EkiOnOff,
+ mgnt2CnfDeleteConfig
+ EkiOnOff
+ }
+
+ mgnt2CnfManageConfigIndex OBJECT-TYPE
+ SYNTAX Integer32(0..16)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Index of config file slots"
+ ::= { mgnt2CnfManageConfigFilesEntry 1 }
+
+ mgnt2CnfManageConfigFileID OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration file ID in FLASH:This OID gives the
+ ID of the configuration file in MGNT2 FLASH"
+ ::= { mgnt2CnfManageConfigFilesEntry 2 }
+
+ mgnt2CnfManageConfigFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration file name in FLASH:This OID gives the
+ name of the configuration file in MGNT2 FLASH"
+ ::= { mgnt2CnfManageConfigFilesEntry 3 }
+
+ mgnt2CnfModuleSlotNumber OBJECT-TYPE
+ SYNTAX Integer32(3..6)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration target:This OID defines the target
+ module slot number for the configuration file"
+ ::= { mgnt2CnfManageConfigFilesEntry 4 }
+
+ mgnt2CnfBackupConfig OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration backup:This OID backups the
+ configuration of the specified module to the
+ selected file in MGNT2 FLASH"
+ ::= { mgnt2CnfManageConfigFilesEntry 5 }
+
+ mgnt2CnfRestoreConfig OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration Restore:This OID restores the
+ configuration of the specified module from the
+ selected file in MGNT2 FLASH"
+ ::= { mgnt2CnfManageConfigFilesEntry 6 }
+
+ mgnt2CnfExportConfig OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration Export:This OID exports the selected
+ file in MGNT2 FLASH to a file in RAM"
+ ::= { mgnt2CnfManageConfigFilesEntry 7 }
+
+
+ mgnt2CnfDeleteConfig OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configuration delete from FLASH:This OID deletes the
+ configuration file from the MGNT2 FLASH"
+ ::= { mgnt2CnfManageConfigFilesEntry 8 }
+
+
+-- *****************************************************************
+--
+-- MGNT2 Remote inventory
+--
+-- *****************************************************************
+
+mgnt2RinvHwPlatform OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis Hardware inventory:This OID gives the
+ Hardware inventory of the Mgnt2 management module"
+ ::= { mgnt2RemoteInventory 1 }
+
+mgnt2RinvSoftwarePackage OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis Software package inventory:this OID gives
+ the Software package inventory of the Mgnt2
+ management module"
+ ::= { mgnt2RemoteInventory 2 }
+
+mgnt2RinvGateware OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis Gateware inventory:This OID gives the
+ gateware inventory of the Mgnt2 management module"
+ ::= { mgnt2RemoteInventory 3 }
+
+
+mgnt2RinvAgent OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis Software inventory:This OID gives the
+ software inventory of the Mgnt2 management module"
+ ::= { mgnt2RemoteInventory 4 }
+
+mgnt2RinvCraft OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis Craft inventory:This OID gives the
+ craft inventory of the Mgnt2 management module"
+ ::= { mgnt2RemoteInventory 5 }
+
+mgnt2RinvLinux OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Chassis Linux inventory:This OID gives the
+ linux inventory of the Mgnt2 management module"
+ ::= { mgnt2RemoteInventory 6 }
+
+EkiPlugInState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Plug-in state"
+ SYNTAX INTEGER {
+ absent(0),
+ loaded(1),
+ versionError(2),
+ symbolError(3)
+ }
+
+mgnt2GigmPlugInTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2GigmPlugInEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "List of Plug-ins present"
+ ::= { mgnt2RemoteInventory 7 }
+
+mgnt2GigmPlugInEntry OBJECT-TYPE
+ SYNTAX Mgnt2GigmPlugInEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Row Definition for the Plug-ins table"
+ INDEX { mgnt2IndexPlugIns }
+ ::= { mgnt2GigmPlugInTable 1 }
+
+Mgnt2GigmPlugInEntry ::=
+ SEQUENCE {
+ mgnt2IndexPlugIns
+ Integer32,
+ mgnt2PlugInRinv
+ DisplayString,
+ mgnt2PollingPresent
+ EkiPlugInState,
+ mgnt2SnmpPresent
+ EkiPlugInState
+ }
+
+ mgnt2IndexPlugIns OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Index for PMs table"
+ ::= { mgnt2GigmPlugInEntry 1 }
+
+
+ mgnt2PlugInRinv OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Plug-in RI:This OID gives the remote inventory of the plug-in"
+ ::= { mgnt2GigmPlugInEntry 2 }
+
+ mgnt2PollingPresent OBJECT-TYPE
+ SYNTAX EkiPlugInState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Polling present:This OID gives the presence of the polling plug-in"
+ ::= { mgnt2GigmPlugInEntry 3 }
+
+ mgnt2SnmpPresent OBJECT-TYPE
+ SYNTAX EkiPlugInState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Snmp present:This OID gives the presence of the snmp plug-in"
+ ::= { mgnt2GigmPlugInEntry 4 }
+
+mgnt2RinvBackpanel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Backpanel inventory:This OID gives the
+ Backpanel inventory of the chassis"
+ ::= { mgnt2RemoteInventory 8 }
+
+mgnt2RinvFan OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Fan inventory:This OID gives the
+ fan inventory of the chassis"
+ ::= { mgnt2RemoteInventory 9 }
+
+mgnt2RinvUboot OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "U-Boot inventory:This OID gives the
+ U-Boot inventory"
+ ::= { mgnt2RemoteInventory 10 }
+
+-- *****************************************************************
+--
+-- MGNT2 Error counters
+--
+-- *****************************************************************
+
+
+mgnt2GigmErrorCounterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2GigmErrorCounterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "List of error counters"
+ ::= { mgnt2ErrorCounters 1 }
+
+mgnt2GigmErrorCounterEntry OBJECT-TYPE
+ SYNTAX Mgnt2GigmErrorCounterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Row Definition for the error counters table"
+ INDEX { mgnt2IndexErrorCounter }
+ ::= { mgnt2GigmErrorCounterTable 1 }
+
+Mgnt2GigmErrorCounterEntry ::=
+ SEQUENCE {
+ mgnt2IndexErrorCounter
+ Integer32,
+ mgnt2ErrorCounterSlotNumber
+ Integer32,
+ mgnt2ErrorCounterValue
+ Integer32
+ }
+
+ mgnt2IndexErrorCounter OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Index for error counters table"
+ ::= { mgnt2GigmErrorCounterEntry 1 }
+
+
+ mgnt2ErrorCounterSlotNumber OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Slot number:This OID gives the slot number for the corresponding counter"
+ ::= { mgnt2GigmErrorCounterEntry 2 }
+
+ mgnt2ErrorCounterValue OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count value:This OID gives the value of the error counter"
+ ::= { mgnt2GigmErrorCounterEntry 3 }
+
+
+mgnt2GigmResetErrorCounters OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Reset error counters:This OID reset the error counters to 0"
+ ::= { mgnt2ErrorCounters 2 }
+
+
+-- *****************************************************************
+--
+-- MGNT2 Perf objects
+--
+-- *****************************************************************
+
+mgnt2PerfCapabilityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2PerfCapabilityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "List of Perf capability of PMs plugged in the Chassis"
+ ::= { mgnt2Perf 1 }
+
+mgnt2PerfCapabilityEntry OBJECT-TYPE
+ SYNTAX Mgnt2PerfCapabilityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Row Definition for the Perf capability table"
+ INDEX { mgnt2PerfCapIndexBoards }
+ ::= { mgnt2PerfCapabilityTable 1 }
+
+
+
+Mgnt2PerfCapabilityEntry ::=
+ SEQUENCE {
+ mgnt2PerfCapIndexBoards
+ Integer32,
+ mgnt2PerfCapPosition
+ Integer32,
+ mgnt2PerfCapName
+ DisplayString,
+ mgnt2PerfCapStatus
+ EkiOnOff,
+ mgnt2PerfCapOidEnable
+ OBJECT IDENTIFIER
+ }
+
+
+ mgnt2PerfCapIndexBoards OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Index for Perf cap table"
+ ::= { mgnt2PerfCapabilityEntry 1 }
+
+ mgnt2PerfCapPosition OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PM Slot number:This OID gives the slot number in
+ which the PM is plugged"
+ ::= { mgnt2PerfCapabilityEntry 2 }
+
+ mgnt2PerfCapName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PM name:This OID gives the name of the PM plugged
+ in the Mgnt2"
+ ::= { mgnt2PerfCapabilityEntry 3 }
+
+ mgnt2PerfCapStatus OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status of the perf cap:This OID gives the capability
+ of the pm to do performance"
+ ::= { mgnt2PerfCapabilityEntry 4 }
+
+ mgnt2PerfCapOidEnable OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "OID of the object perf enable:This OID gives the OID of
+ the perf enable object of the correspondind mib of the module"
+ ::= { mgnt2PerfCapabilityEntry 5 }
+
+
+
+
+
+mgnt2GigmPerf15minSync OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "15 min sync perf : this oid send a 15min sync to all modules"
+ ::= { mgnt2Perf 2 }
+
+mgnt2GigmPerf24hSync OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "15 min sync perf : this oid send a 24h sync to all modules"
+ ::= { mgnt2Perf 3 }
+
+mgnt2PerfResyncNMS OBJECT-TYPE
+ SYNTAX Mgnt2PerfResyncValues
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Resync Perf : this oid allows to create an historical perf file for all modules"
+ ::= { mgnt2Perf 4 }
+
+
+-- *****************************************************************
+--
+-- MGNT2 Board management
+--
+-- *****************************************************************
+
+mgnt2alarms OBJECT IDENTIFIER ::= { mgnt2Hardware 1}
+mgnt2controls OBJECT IDENTIFIER ::= { mgnt2Hardware 2}
+mgnt2config OBJECT IDENTIFIER ::= { mgnt2Hardware 3}
+
+
+
+
+
+
+--- *****************************************************
+--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
+--- ALARMS
+--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
+--- *****************************************************
+
+
+
+--- *****************************************************
+--- LEAF for the synthAlm0 article
+--- *****************************************************
+mgnt2AlmsynthAlm0 OBJECT IDENTIFIER ::= { mgnt2alarms 0 }
+
+
+
+
+mgnt2AlmMgntDefFuseB OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Mgnt Fuse B Fail :This OID indicates
+ that the fuse of the power input
+ B is in fail condition on the Management
+ board <Help> Status of the MGNT
+ Fuse B <Condtype> MGNT_DEF_FUSE_B
+ <Probcause> powerProblem (36) <Alarmtype>
+ equipmentAlarm (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmsynthAlm0 16 }
+
+
+
+mgnt2AlmMgntDefFuseA OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Mgnt Fuse A Fail :This OID indicates
+ that the fuse of the power input
+ A is in fail condition on the Management
+ board <Help> Status of the MGNT
+ Fuse A <Condtype> MGNT_DEF_FUSE_A
+ <Probcause> powerProblem (36) <Alarmtype>
+ equipmentAlarm (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmsynthAlm0 15 }
+
+
+
+mgnt2AlmDef48b OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Power Input B Present :This OID
+ indicates that there is not input
+ power on the right power connector
+ (B) <Help> This alarm indicates
+ if the power input B is present
+ (right power connector) <Condtype>
+ DEF_48B <Probcause> powerProblem
+ (36) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmsynthAlm0 12 }
+
+
+
+mgnt2AlmDef48a OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Power Input A Present :This OID
+ indicates that there is not input
+ power on the right power connector
+ (A) <Help> This alarm indicates
+ if the power input B is present
+ (left power connector) <Condtype>
+ DEF_48A <Probcause> powerProblem
+ (36) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmsynthAlm0 11 }
+
+
+
+mgnt2AlmFansFailure OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Chassis Fan Module Failure :This
+ OID indicates that at least one
+ of the three FAN unit of the FAN
+ module is in fail condition <Condtype>
+ FANS_FAILURE <Probcause> other(1)
+ <Alarmtype> equipmentAlarm (5)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmsynthAlm0 10 }
+
+
+
+mgnt2AlmAbsFailure OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Chassis Management Module Failure
+ :This OID indicates that the Chassis
+ Management module is in fail condition
+ <Condtype> ABS_FAILURE <Probcause>
+ other(1) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmsynthAlm0 9 }
+
+
+
+--- *****************************************************
+--- LEAF for the synthAlm1 article
+--- *****************************************************
+mgnt2AlmsynthAlm1 OBJECT IDENTIFIER ::= { mgnt2alarms 1 }
+
+
+
+
+mgnt2AlmAcknowledge OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Alarm Ack. :This OID indicates
+ the alarms have been acknowledged
+ by the user (locally or remotely)
+ <Help> This status indicates
+ the alarms have been acknowledged
+ by the user (locally or remotely)
+ <Condtype> ACKNOWLEDGE <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmsynthAlm1 16 }
+
+
+
+mgnt2AlmCritVisual OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Critical Chassis Alarm :This OID
+ indicates at least one Critical
+ alarm is active on the complete
+ chassis (including TR-FAN, MGNT
+ and PM) <Help> This alarm indicates
+ at least one Critical alarm is
+ active on the complete chassis
+ (including TR-FAN, MGNT and PM)
+
+ <Condtype> CRIT_VISUAL <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmsynthAlm1 3 }
+
+
+
+mgnt2AlmUrgVisual OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Major Chassis Alarm :This OID
+ indicates at least one Major alarm
+ is active on the complete chassis
+ (including TR-FAN, MGNT and PM)
+ <Help> This alarm indicates
+ at least one Major alarm is active
+ on the complete chassis (including
+ TR-FAN, MGNT and PM) <Condtype>
+ URG_VISUAL <Probcause> other(1)
+ <Alarmtype> other (1) <Polarity>
+ (2)
+ "
+ ::= { mgnt2AlmsynthAlm1 2 }
+
+
+
+mgnt2AlmNurgVisual OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Minor Chassis Alarm :This OID
+ indicates at least one Minor alarm
+ is active on the complete chassis
+ (including TR-FAN, MGNT and PM)
+ <Help> This alarm indicates at
+ least one Minor alarm is active
+ on the complete chassis (including
+ TR-FAN, MGNT and PM) <Condtype>
+ NURG_VISUAL <Probcause> other(1)
+ <Alarmtype> other (1) <Polarity>
+ (2)
+ "
+ ::= { mgnt2AlmsynthAlm1 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the boardMgmntSet1 article
+--- *****************************************************
+mgnt2AlmboardMgmntSet1 OBJECT IDENTIFIER ::= { mgnt2alarms 16 }
+
+
+
+
+mgnt2AlmPmFanAbsent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ FAN module present in Chassis
+ :This OID indicates the presence
+ of the FAN module in the Chassis.
+ <Help> This alarm indicates if
+ the FAN module is detected in the
+ chassis. <Condtype> PM_FAN_ABSENT
+ <Probcause> other(1) <Alarmtype>
+ equipmentAlarm (5) <Polarity>
+ (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 14 }
+
+
+
+mgnt2AlmPmSlot11Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 11
+ :This OID indicates the presence
+ of a PM in Slot 11 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 11
+ <Condtype> PM_SLOT11_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 12 }
+
+
+
+mgnt2AlmPmSlot10Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 10
+ :This OID indicates the presence
+ of a PM in Slot 10 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 10
+ <Condtype> PM_SLOT10_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 11 }
+
+
+
+mgnt2AlmPmSlot9Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 9 :This
+ OID indicates the presence of a
+ PM in Slot 9 of the Chassis .
+ <Help> This status indicates
+ if a PM is detected in slot 9
+ <Condtype> PM_SLOT9_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 10 }
+
+
+
+mgnt2AlmPmSlot8Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 8 :This
+ OID indicates the presence of a
+ PM in Slot 8 of the Chassis .
+ <Help> This status indicates
+ if a PM is detected in slot 8
+ <Condtype> PM_SLOT8_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 9 }
+
+
+
+mgnt2AlmPmSlot7Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 7 :This
+ OID indicates the presence of a
+ PM in Slot 7 of the Chassis .
+ <Help> This status indicates
+ if a PM is detected in slot 7
+ <Condtype> PM_SLOT7_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 8 }
+
+
+
+mgnt2AlmPmSlot6Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 6 :This
+ OID indicates the presence of a
+ PM in Slot 6 of the Chassis .
+ <Help> This status indicates
+ if a PM is detected in slot 6
+ <Condtype> PM_SLOT6_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 7 }
+
+
+
+mgnt2AlmPmSlot5Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 5 :This
+ OID indicates the presence of a
+ PM in Slot 5 of the Chassis .
+ <Help> This status indicates
+ if a PM is detected in slot 5
+ <Condtype> PM_SLOT5_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 6 }
+
+
+
+mgnt2AlmPmSlot4Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 4 :This
+ OID indicates the presence of a
+ PM in Slot 4 of the Chassis .
+ <Help> This status indicates
+ if a PM is detected in slot 4
+ <Condtype> PM_SLOT4_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 5 }
+
+
+
+mgnt2AlmPmSlot3Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 3 :This
+ OID indicates the presence of a
+ PM in Slot 3 of the Chassis .
+ <Help> This status indicates
+ if a PM is detected in slot 3
+ <Condtype> PM_SLOT3_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 4 }
+
+
+
+mgnt2AlmPmSlot2Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 2 :This
+ OID indicates the presence of a
+ PM in Slot 2 of the Chassis .
+ <Help> This status indicates
+ if a PM is detected in slot 2
+ <Condtype> PM_SLOT2_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 3 }
+
+
+
+mgnt2AlmPmSlot1Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 1 :This
+ OID indicates the presence of a
+ PM in Slot 1 of the Chassis .
+ <Help> This status indicates
+ if a PM is detected in slot 1
+ <Condtype> PM_SLOT1_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet1 2 }
+
+
+
+--- *****************************************************
+--- LEAF for the boardMgmntSet2 article
+--- *****************************************************
+mgnt2AlmboardMgmntSet2 OBJECT IDENTIFIER ::= { mgnt2alarms 17 }
+
+
+
+
+mgnt2AlmPmSlot20Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 20
+ :This OID indicates the presence
+ of a PM in Slot 20 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 20
+ <Condtype> PM_SLOT20_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet2 9 }
+
+
+
+mgnt2AlmPmSlot19Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 19
+ :This OID indicates the presence
+ of a PM in Slot 19 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 19
+ <Condtype> PM_SLOT19_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet2 8 }
+
+
+
+mgnt2AlmPmSlot18Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 18
+ :This OID indicates the presence
+ of a PM in Slot 18 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 18
+ <Condtype> PM_SLOT18_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet2 7 }
+
+
+
+mgnt2AlmPmSlot17Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 17
+ :This OID indicates the presence
+ of a PM in Slot 17 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 17
+ <Condtype> PM_SLOT17_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet2 6 }
+
+
+
+mgnt2AlmPmSlot16Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 16
+ :This OID indicates the presence
+ of a PM in Slot 16 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 16
+ <Condtype> PM_SLOT16_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet2 5 }
+
+
+
+mgnt2AlmPmSlot15Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 15
+ :This OID indicates the presence
+ of a PM in Slot 15 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 15
+ <Condtype> PM_SLOT15_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet2 4 }
+
+
+
+mgnt2AlmPmSlot14Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 14
+ :This OID indicates the presence
+ of a PM in Slot 14 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 14
+ <Condtype> PM_SLOT14_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet2 3 }
+
+
+
+mgnt2AlmPmSlot13Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 13
+ :This OID indicates the presence
+ of a PM in Slot 13 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 13
+ <Condtype> PM_SLOT13_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet2 2 }
+
+
+
+mgnt2AlmPmSlot12Absent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ PM present in Chassis slot 12
+ :This OID indicates the presence
+ of a PM in Slot 12 of the Chassis
+ . <Help> This status indicates
+ if a PM is detected in slot 12
+ <Condtype> PM_SLOT12_ABSENT <Probcause>
+ other(1) <Alarmtype> other (1)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmboardMgmntSet2 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the fanMgmnt article
+--- *****************************************************
+mgnt2AlmfanMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 20 }
+
+
+
+
+mgnt2AlmFanFilterAbsent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Dust Filter Presence :This OID
+ indicates that the dust filter
+ is not present<Help> This alarm
+ indicates if the Dust Filter is
+ detected in the chassis. <Condtype>
+ FAN_FILTER_ABSENT <Probcause> other(1)
+ <Alarmtype> equipmentAlarm (5)
+ <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanMgmnt 16 }
+
+
+
+mgnt2AlmPbFan6Fail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Unit #6 Failed On Fan Module
+ :This OID indicates a failure on
+ fan 6. Removal of the fan unit
+ or no rotation sets the OID.
+ <Help> This alarm indicates if
+ the FAN #6 is in fail condition
+ <Condtype> PB_FAN6_FAIL <Probcause>
+ heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanMgmnt 7 }
+
+
+
+mgnt2AlmPbFan5Fail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Unit #5 Failed On Fan Module
+ :This OID indicates a failure on
+ fan 5. Removal of the fan unit
+ or no rotation sets the OID.
+ <Help> This alarm indicates if
+ the FAN #5 is in fail condition
+ <Condtype> PB_FAN5_FAIL <Probcause>
+ heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanMgmnt 6 }
+
+
+
+mgnt2AlmPbFan4Fail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Unit #4 Failed On Fan Module
+ :This OID indicates a failure on
+ fan 4. Removal of the fan unit
+ or no rotation sets the OID.
+ <Help> This alarm indicates if
+ the FAN #4 is in fail condition
+ <Condtype> PB_FAN4_FAIL <Probcause>
+ heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanMgmnt 5 }
+
+
+
+mgnt2AlmPbFan3Fail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Unit #3 Failed On Fan Module
+ :This OID indicates a failure on
+ fan 3. Removal of the fan unit
+ or no rotation sets the OID.
+ <Help> This alarm indicates if
+ the FAN #3 is in fail condition
+ <Condtype> PB_FAN3_FAIL <Probcause>
+ heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanMgmnt 4 }
+
+
+
+mgnt2AlmPbFan2Fail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Unit #2 Failed On Fan Module
+ :This OID indicates a failure on
+ fan 2. Removal of the fan unit
+ or no rotation sets the OID.
+ <Help> This alarm indicates if
+ the FAN #2 is in fail condition
+ <Condtype> PB_FAN2_FAIL <Probcause>
+ heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanMgmnt 3 }
+
+
+
+mgnt2AlmPbFan1Fail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Unit #1 Failed On Fan Module
+ :This OID indicates a failure on
+ fan 1. Removal of the fan unit
+ or no rotation sets the OID.
+ <Help> This alarm indicates if
+ the FAN #1 is in fail condition
+ <Condtype> PB_FAN1_FAIL <Probcause>
+ heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanMgmnt 2 }
+
+
+
+--- *****************************************************
+--- LEAF for the fanPwrMgmnt article
+--- *****************************************************
+mgnt2AlmfanPwrMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 24 }
+
+
+
+
+mgnt2AlmFanDefFuseB OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Fuse B Fail :This OID indicates
+ that the fuse of the power input
+ B is in fail condition on the Fan
+ board <Help> Status of the FAN
+ Fuse B <Condtype> FAN_DEF_FUSE_B
+ <Probcause> powerProblem (36) <Alarmtype>
+ equipmentAlarm (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanPwrMgmnt 16 }
+
+
+
+mgnt2AlmFanDefFuseA OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Fuse A Fail :This OID indicates
+ that the fuse of the power input
+ A is in fail condition on the Fan
+ board <Help> Status of the FAN
+ Fuse A <Condtype> FAN_DEF_FUSE_A
+ <Probcause> powerProblem (36) <Alarmtype>
+ equipmentAlarm (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanPwrMgmnt 15 }
+
+
+
+mgnt2AlmFanPwrFail1 OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Main Power :This OID indicates
+ a failure on the main power of
+ the FAN module <Help> This
+ alarm indicates if one of the
+ tow main power convert of the
+ FAN module is in fail condition
+ <Condtype> FAN_PWR_FAIL_1 <Probcause>
+ powerProblem (36) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanPwrMgmnt 13 }
+
+
+
+mgnt2AlmFanPwrProtOn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Fan Backup Power :This OID indicates
+ the backup power on the FAN module
+ is switched on <Condtype> FAN_PWR_PROT_ON
+ <Probcause> powerProblem (36) <Alarmtype>
+ equipmentAlarm (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmfanPwrMgmnt 12 }
+
+
+
+--- *****************************************************
+--- LEAF for the removeablefanModuleFail article
+--- *****************************************************
+mgnt2AlmremoveablefanModuleFail OBJECT IDENTIFIER ::= { mgnt2alarms 25 }
+
+
+
+
+mgnt2AlmFan4ModuleAbsent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ FAN Module #4 Present In Chassis
+ :This OID indicates the presence
+ of the FAN module #4 in the Chassis.<Help>
+ This alarm indicates if the FAN
+ module #4 is detected in the chassis.
+ <Condtype> FAN4_MODULE_ABSENT <Probcause>
+ other(1) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmremoveablefanModuleFail 4 }
+
+
+
+mgnt2AlmFan3ModuleAbsent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ FAN Module #3 Present In Chassis
+ :This OID indicates the presence
+ of the FAN module #3 in the Chassis.<Help>
+ This alarm indicates if the FAN
+ module #3 is detected in the chassis.
+ <Condtype> FAN3_MODULE_ABSENT <Probcause>
+ other(1) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmremoveablefanModuleFail 3 }
+
+
+
+mgnt2AlmFan2ModuleAbsent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ FAN Module #2 Present In Chassis
+ :This OID indicates the presence
+ of the FAN module #2 in the Chassis.<Help>
+ This alarm indicates if the FAN
+ module #2 is detected in the chassis.
+ <Condtype> FAN2_MODULE_ABSENT <Probcause>
+ other(1) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmremoveablefanModuleFail 2 }
+
+
+
+mgnt2AlmFan1ModuleAbsent OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ FAN Module #1 Present In Chassis
+ :This OID indicates the presence
+ of the FAN module #1 in the Chassis.<Help>
+ This alarm indicates if the FAN
+ module #1 is detected in the chassis.
+ <Condtype> FAN1_MODULE_ABSENT <Probcause>
+ other(1) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmremoveablefanModuleFail 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the removeableFanModuleMgmnt article
+--- *****************************************************
+mgnt2AlmremoveableFanModuleMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 26 }
+
+
+
+
+mgnt2AlmFan4ModuleFail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ FAN Module #4 Failure :This OID
+ indicates a failure on FAN module
+ #4 <Help> This alarm indicates
+ if the FAN module #4 is in fail
+ condition <Condtype> FAN4_MODULE_FAIL
+ <Probcause> heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmremoveableFanModuleMgmnt 4 }
+
+
+
+mgnt2AlmFan3ModuleFail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ FAN Module #3 Failure :This OID
+ indicates a failure on FAN module
+ #3 <Help> This alarm indicates
+ if the FAN module #3 is in fail
+ condition <Condtype> FAN3_MODULE_FAIL
+ <Probcause> heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmremoveableFanModuleMgmnt 3 }
+
+
+
+mgnt2AlmFan2ModuleFail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ FAN Module #2 Failure :This OID
+ indicates a failure on FAN module
+ #2 <Help> This alarm indicates
+ if the FAN module #2 is in fail
+ condition <Condtype> FAN2_MODULE_FAIL
+ <Probcause> heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmremoveableFanModuleMgmnt 2 }
+
+
+
+mgnt2AlmFan1ModuleFail OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ FAN Module #1 Failure :This OID
+ indicates a failure on FAN module
+ #1 <Help> This alarm indicates
+ if the FAN module #1 is in fail
+ condition <Condtype> FAN1_MODULE_FAIL
+ <Probcause> heatingVentCoolingSystemProblem
+ (22) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmremoveableFanModuleMgmnt 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the swAlarm1 article
+--- *****************************************************
+mgnt2AlmswAlarm1 OBJECT IDENTIFIER ::= { mgnt2alarms 32 }
+
+
+
+
+mgnt2AlmPollingManagerError OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Polling Manager fail :This OID
+ indicates a failure on the Manager
+ polling the PM's <Help>
+ <Help> This alarm indicates if
+ there is a polling manager failure
+ between the MGNT and the Pm's <Condtype>
+ POLLING_MANAGER_ERROR <Probcause>
+ adapterError (2) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmswAlarm1 3 }
+
+
+
+mgnt2AlmFifoCmdError OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ SNMP Agent to Transport comm FIFO
+ fail :This OID indicates a failure
+ inside the FIFO stack. The FIFO
+ containing the messages from
+ the agent (write) to the PMs is
+ full <Help> This alarm indicates
+ if there is a communication mismatch
+ between the MGNT board and all
+ PM <Condtype> FIFO_CMD_ERROR <Probcause>
+ adapterError (2) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmswAlarm1 2 }
+
+
+
+mgnt2AlmApiError OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Comm fail between Agent and Transport
+ :This OID indicates a failure detected
+ on the Agent.The failure is
+ located on a communication process
+ with the modules. <Help> This
+ alarm indicates if there is a communication
+ mismatch between the MGNT board
+ and a single PM <Condtype> API_ERROR
+ <Probcause> adapterError (2) <Alarmtype>
+ equipmentAlarm (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmswAlarm1 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the apiErrorCode article
+--- *****************************************************
+
+mgnt2AlmapiErrorCode OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ API Error Identification :Error
+ number and description of the abs1AlmApiError
+ object <Condtype> API_ERROR_CODE_1
+ <Probcause> <Alarmtype>
+ "
+ ::= { mgnt2alarms 33 }
+
+
+
+--- *****************************************************
+--- LEAF for the logMgmnt article
+--- *****************************************************
+mgnt2AlmlogMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 34 }
+
+
+
+
+mgnt2AlmLog80Full OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Log File Full Warning :This OID
+ indicates that a log file is 80%
+ full. <Help> This alarm indicates
+ that one of the log file is 80%
+ Full <Condtype> LOG_80_FULL <Probcause>
+ fileError (18) <Alarmtype> equipmentAlarm
+ (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmlogMgmnt 2 }
+
+
+
+mgnt2AlmLogFileFull OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Log File Full Alarm :This OID
+ indicates that a log file is full.
+ This file must be cleared to insure
+ correct log function <Help> This
+ alarm indicates that one of the
+ log file is Full <Condtype> LOG_FILE_FULL
+ <Probcause> fileError (18) <Alarmtype>
+ equipmentAlarm (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmlogMgmnt 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the ntpSyncLoss article
+--- *****************************************************
+mgnt2AlmntpSyncLoss OBJECT IDENTIFIER ::= { mgnt2alarms 35 }
+
+
+
+
+mgnt2AlmCpuTempOverRange OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ CPU HighTemperature Warning :This
+ OID indicates a temperature over
+ the expected range on the CPU<Help>
+ This warning indicates that the
+ temperature of the CPU is reaching
+ its internal limit <Condtype> CPU_TEMP_OVER_RANGE
+ <Probcause> other(1) <Alarmtype>
+ equipmentAlarm (5) <Polarity> (2)
+ "
+ ::= { mgnt2AlmntpSyncLoss 2 }
+
+
+
+mgnt2AlmNtpSyncLoss OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ NTP Sync Loss :This OID indicates
+ a loss of synchronisation with
+ the NTP Server. <Help> This
+ alarm indicates a loss of synchronisation
+ with the NTP Server. <Condtype>
+ NTP_SYNC_LOSS <Probcause> timingProblem
+ (53) <Alarmtype> timeDomainViolation
+ (11) <Polarity> (2)
+ "
+ ::= { mgnt2AlmntpSyncLoss 1 }
+
+
+
+
+
+
+
+
+--- *****************************************************
+--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
+--- CONTROLS
+--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
+--- *****************************************************
+
+
+
+--- *****************************************************
+--- LEAF for the synth5 article
+--- *****************************************************
+mgnt2Ctrlsynth5 OBJECT IDENTIFIER ::= { mgnt2controls 5 }
+
+
+
+
+mgnt2CtrlChassisColdReset OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Cold Reset of the Management Module
+ :This oid triggers a 'cold' reset
+ of the Chassis . This type of reset
+ is not traffic affecting and the
+ modules configuration remains
+ unchanged. <Help> This control
+ initiates a cold reset of the MGNT
+ board,
+ "
+ ::= { mgnt2Ctrlsynth5 4 }
+
+
+
+mgnt2CtrlChassisWarmReset OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Reset of the Management Module
+ :This oid triggers a 'warm' reset
+ of the Chassis . This type of reset
+ is not traffic affecting and the
+ modules configuration remains
+ unchanged. <Help> This control
+ initiates a warm reset of the MGNT
+ board,
+ "
+ ::= { mgnt2Ctrlsynth5 3 }
+
+
+
+mgnt2CtrlChassisShutdown OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Shut Down of the Management Module
+ :This OID shall be set before shutting
+ down the Chassis power. A delay
+ of 5 sec is necessary between this
+ OID is set and power is shut down.
+ <Help> This control initiates
+ a shutdown of the MGNT board,
+ "
+ ::= { mgnt2Ctrlsynth5 2 }
+
+
+
+--- *****************************************************
+--- LEAF for the testLed article
+--- *****************************************************
+mgnt2CtrltestLed OBJECT IDENTIFIER ::= { mgnt2controls 18 }
+
+
+
+
+mgnt2CtrlLedOff OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Switch off Leds Test :This OID
+ switches off all the Leds as a
+ test feature <Help> This control
+ initiates a test leds turning all
+ the LEDs of the complete chassis
+ to OFF
+ "
+ ::= { mgnt2CtrltestLed 3 }
+
+
+
+mgnt2CtrlRedLed OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Red Leds Test :This OID switches
+ on all the red Leds as a test feature
+ <Help> This control initiates
+ a test leds turning all the LEDs
+ of the chassis to red
+ "
+ ::= { mgnt2CtrltestLed 2 }
+
+
+
+mgnt2CtrlGreenLed OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Green Leds Test :This OID switches
+ on all the green Leds as a test
+ feature <Help> This control initiates
+ a test leds turning all the LEDs
+ of the chassis to green
+ "
+ ::= { mgnt2CtrltestLed 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the logFile article
+--- *****************************************************
+mgnt2CtrllogFile OBJECT IDENTIFIER ::= { mgnt2controls 19 }
+
+
+
+
+mgnt2CtrlLogFileReset OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Log File Reset :This OID clears
+ all the log files
+ "
+ ::= { mgnt2CtrllogFile 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the mgntSaveConfig article
+--- *****************************************************
+mgnt2CtrlmgntSaveConfig OBJECT IDENTIFIER ::= { mgnt2controls 23 }
+
+
+
+
+mgnt2CtrlSaveConfig OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Save Configuration :This OID is
+ used save the configuration related
+ to the enable and mode traps objects
+ <Help> This control saves the
+ customer configuration on the MGNT
+ board
+ "
+ ::= { mgnt2CtrlmgntSaveConfig 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the mgntGetGlobalConfig article
+--- *****************************************************
+mgnt2CtrlmgntGetGlobalConfig OBJECT IDENTIFIER ::= { mgnt2controls 24 }
+
+
+
+
+mgnt2CtrlGetGlobalConfig OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Get Global Chassis Config :This
+ OID is used to create a global
+ configuration file of the chassis
+ <Help> This control creates a
+ single configuration file from
+ PM's and MGNT configuration file
+ into the RAM
+ "
+ ::= { mgnt2CtrlmgntGetGlobalConfig 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the mgntPutGlobalConfig article
+--- *****************************************************
+mgnt2CtrlmgntPutGlobalConfig OBJECT IDENTIFIER ::= { mgnt2controls 25 }
+
+
+
+
+mgnt2CtrlPutGlobalConfig OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Put Global Chassis Config :This
+ OID is used to extract a global
+ configuration file of the chassis
+ <Help> This control creates configuration
+ files to PM's and MGNT from a
+ single configuration file in the
+ RAM
+ "
+ ::= { mgnt2CtrlmgntPutGlobalConfig 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the mgntAcknowledge article
+--- *****************************************************
+mgnt2CtrlmgntAcknowledge OBJECT IDENTIFIER ::= { mgnt2controls 26 }
+
+
+
+
+mgnt2CtrlAcknowledge OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Alarm Ack. :This OID is used to
+ acknowledge the current active
+ alarms of the chassis <Help>
+ This control is used to acknowledge
+ the current active alarms of the
+ chassis
+ "
+ ::= { mgnt2CtrlmgntAcknowledge 1 }
+
+
+
+
+
+
+
+
+--- *****************************************************
+--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
+--- CONFIG
+--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
+--- *****************************************************
+
+
+
+--- *****************************************************
+--- LEAF for the ethPort2 article
+--- *****************************************************
+mgnt2CfgethPort2 OBJECT IDENTIFIER ::= { mgnt2config 17 }
+
+
+
+
+mgnt2CfgChassisEthernetSplit OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Chassis Ethernet Split :This
+ OID enables the split between
+ the two kendings. <Help> Enable/Disable
+ the switch between the two kendings
+ "
+ ::= { mgnt2CfgethPort2 2 }
+
+
+
+mgnt2CfgEthPort2Disable OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 2nd Ethernet Port Disable :This
+ OID disables 'Ethernet Port 2'
+ .When not required, this port
+ must be disabled in order to
+ prevent unwanted access. <Help>
+ Disable the second Ethernet port
+ "
+ ::= { mgnt2CfgethPort2 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the mgntDccEnable article
+--- *****************************************************
+
+mgnt2CfgmgntDccEnable OBJECT-TYPE
+ SYNTAX Mgnt2DccAccessValues
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ DCC Access :This OID selects
+ the mode to enable the DCC on
+ the slots. This Mode enables the
+ Slots 2-4-6-8-10 , or the Slots
+ 2-6-10-14-18. <Help> Defines
+ the DCC access on the backplane
+ of the chassis (Slots 2-4-6-8-10
+ or Slots 2-6-10-14-18)
+ "
+ ::= { mgnt2config 18 }
+
+
+
+--- *****************************************************
+--- LEAF for the pmTrapEnable article
+--- *****************************************************
+mgnt2CfgpmTrapEnable OBJECT IDENTIFIER ::= { mgnt2config 20 }
+
+
+
+
+mgnt2CfgPmConfigTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Config Traps Enable :This OID,
+ when set, enables the generation
+ of a trap when the configuration
+ of a PM plugged in the chassis
+ is modified <Help> In detailed
+ traps mechanism, enable the trap
+ emission on PM configuration modificatio
+ "
+ ::= { mgnt2CfgpmTrapEnable 6 }
+
+
+
+mgnt2CfgPmControlTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Control Traps Enable :This OID,
+ when set, enables the generation
+ of a trap when a control is sent
+ to a PM plugged in the chassis
+
+ <Help> In detailed traps
+ mechanism, enable the trap emission
+ on control sent to PM
+ "
+ ::= { mgnt2CfgpmTrapEnable 5 }
+
+
+
+mgnt2CfgPmMinorTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Minor Alarm Traps Enable :This
+ OID, when set, enables the generation
+ of the minor alarm trap for all
+ the PM plugged in the chassis
+ <Help> In detailed traps mechanism,
+ enable the trap emission on minor
+ alarm detected on PM
+ "
+ ::= { mgnt2CfgpmTrapEnable 3 }
+
+
+
+mgnt2CfgPmMajorTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Major Alarm Traps Enable :This
+ OID, when set, enables the generation
+ of the major alarm trap for all
+ the PM plugged in the chassis
+ <Help> In detailed traps mechanism,
+ enable the trap emission on major
+ alarm detected on PM
+ "
+ ::= { mgnt2CfgpmTrapEnable 2 }
+
+
+
+mgnt2CfgPmCriticalTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Critical Alarm Traps Enable :This
+ OID, when set, enables the generation
+ of the critical alarm trap for
+ all the PM plugged in the chassis
+ <Help> In detailed traps mechanism,
+ enable the trap emission on critical
+ alarm detected on PM
+ "
+ ::= { mgnt2CfgpmTrapEnable 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the mgntTrapEnable article
+--- *****************************************************
+mgnt2CfgmgntTrapEnable OBJECT IDENTIFIER ::= { mgnt2config 21 }
+
+
+
+
+mgnt2CfgMgntEventTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ MGNT Event Traps Enable :This
+ OID, when set, enables the generation
+ of a trap when an event occurs
+ on the chassis <Help> In detailed
+ traps mechanism, enable the trap
+ emission on event detected in the
+ chassis
+ "
+ ::= { mgnt2CfgmgntTrapEnable 7 }
+
+
+
+mgnt2CfgMgntConfigTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ MGNT Config Traps Enable :This
+ OID, when set, enables the generation
+ of a trap when the configuration
+ of a MGNT plugged in the chassis
+ is modified <Help> In detailed
+ traps mechanism, enable the trap
+ emission on MGNT configuration
+ modification
+ "
+ ::= { mgnt2CfgmgntTrapEnable 6 }
+
+
+
+mgnt2CfgMgntControlTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ MGNT Control Traps Enable :This
+ OID, when set, enables the generation
+ of a trap when a control is sent
+ to a MGNT plugged in the chassis
+
+ <Help> In detailed traps
+ mechanism, enable the trap emission
+ on control sent to MGNT
+ "
+ ::= { mgnt2CfgmgntTrapEnable 5 }
+
+
+
+mgnt2CfgMgntMinorTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ MGNT Minor Alarm Traps Enable
+ :This OID, when set, enables the
+ generation of the minor alarm trap
+ for the MGNT and FAN board <Help>
+ In detailed traps mechanism, enable
+ the trap emission on minor alarm
+ detected on MGNT and FAN
+ "
+ ::= { mgnt2CfgmgntTrapEnable 3 }
+
+
+
+mgnt2CfgMgntMajorTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ MGNT Major Traps Enable :This
+ OID, when set, enables the generation
+ of the major alarm trap for the
+ MGNT and FAN board <Help> In
+ detailed traps mechanism, enable
+ the trap emission on major alarm
+ detected on MGNT and FAN
+ "
+ ::= { mgnt2CfgmgntTrapEnable 2 }
+
+
+
+mgnt2CfgMgntCriticalTrapEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ MGNT Critical Alarm Traps Enable
+ :This OID, when set, enables the
+ generation of the critical alarm
+ trap for the MGNT and FAN board
+ <Help> In detailed traps mechanism,
+ enable the trap emission on critical
+ alarm detected on MGNT and FAN
+ "
+ ::= { mgnt2CfgmgntTrapEnable 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the mgntTrapMode article
+--- *****************************************************
+
+mgnt2CfgmgntTrapMode OBJECT-TYPE
+ SYNTAX Mgnt2TrapModeValues
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Traps Mode :This OID is used to
+ define the trap mode (synthetic
+ or detailed mode) <Help> Selects
+ the traps mechanism
+ "
+ ::= { mgnt2config 22 }
+
+
+
+--- *****************************************************
+--- LEAF for the syslogEnable article
+--- *****************************************************
+mgnt2CfgsyslogEnable OBJECT IDENTIFIER ::= { mgnt2config 23 }
+
+
+
+
+mgnt2CfgSyslogAlarmEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Syslog Alarm Enable :This OID,
+ when set, enables the generation
+ of a syslog, when an alarm occurs
+ <Help> Enable a syslog emission
+ on an alarm detected on the chassi
+ "
+ ::= { mgnt2CfgsyslogEnable 4 }
+
+
+
+mgnt2CfgSyslogCtrlEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Syslog Control Enable :This OID,
+ when set, enables the generation
+ of a syslog, when a control is
+ set <Help> Enable a syslog
+ emission on a control operated
+ on the chassis
+ "
+ ::= { mgnt2CfgsyslogEnable 3 }
+
+
+
+mgnt2CfgSyslogConfigEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Syslog Config Enable :This OID,
+ when set, enables the generation
+ of a syslog, when the configuration
+ has been changed. <Help> Enable
+ a syslog emission on a configuration
+ change detected on the chassis
+ "
+ ::= { mgnt2CfgsyslogEnable 2 }
+
+
+
+mgnt2CfgSyslogEventEn OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Syslog Event Enable :This OID,
+ when set, enables the generation
+ of a syslog, when an event has
+ been detected <Help> Enable
+ a syslog emission on event detected
+ on the chassis
+ "
+ ::= { mgnt2CfgsyslogEnable 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the ntpTimeZone article
+--- *****************************************************
+
+mgnt2CfgntpTimeZone OBJECT-TYPE
+ SYNTAX INTEGER (-12..12)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ NTP Time Zone :This OID defines
+ the time zone of the MGNT board
+ for the NTP server <Help> This
+ object defines the time zone of
+ the MGNT board (from -12 to +12
+ hours from the GMT).
+ "
+ ::= { mgnt2config 24 }
+
+
+
+--- *****************************************************
+--- LEAF for the pmConfEnable article
+--- *****************************************************
+mgnt2CfgpmConfEnable OBJECT IDENTIFIER ::= { mgnt2config 25 }
+
+
+
+
+mgnt2CfgPmRestoreEnable OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Automatic Config Restore :This
+ OID enables the automatic PM configuration
+ restore mechanism on PM insertion
+ <Help> This parameter enables
+ the automatic PM configuration
+ restore mechanism on PM insertio
+ "
+ ::= { mgnt2CfgpmConfEnable 2 }
+
+
+
+mgnt2CfgPmBackupEnable OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Automatic Config Backup :This
+ OID enables the automatic PM configuration
+ backup mechanism on PM insertion
+ or PM configuration modification.
+ <Help> This parameter enables
+ the automatic PM configuration
+ backup mechanism on PM insertion
+ or PM configuration modificatio
+ "
+ ::= { mgnt2CfgpmConfEnable 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the inactivityTimeout article
+--- *****************************************************
+
+mgnt2CfginactivityTimeout OBJECT-TYPE
+ SYNTAX INTEGER (-1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Idle Timeout :This OID defines
+ the idle timeout (in minutes) to
+ automatically logout from the craft
+ and from the CLI. <Help> This
+ object defines the idle timeout
+ (in minutes) to automatically logout
+ from the craft and from the CLI
+ "
+ ::= { mgnt2config 26 }
+
+
+
+--- *****************************************************
+--- LEAF for the cliAccess article
+--- *****************************************************
+
+mgnt2CfgcliAccess OBJECT-TYPE
+ SYNTAX Mgnt2CliAccessValues
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ CLI access :This OID selects
+ the protocol for the remote access
+ to a CLI user. <Help> This object
+ defines the protocol used for a
+ remote CLI.
+ "
+ ::= { mgnt2config 27 }
+
+
+
+--- *****************************************************
+--- LEAF for the craftAccess article
+--- *****************************************************
+
+mgnt2CfgcraftAccess OBJECT-TYPE
+ SYNTAX Mgnt2CraftAccessValues
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ CRAFT access :This OID selects
+ the remote access to a CRAFT user.
+ <Help> This object defines the
+ access for a remote CRAFT.
+ "
+ ::= { mgnt2config 28 }
+
+
+
+--- *****************************************************
+--- LEAF for the perfModes1 article
+--- *****************************************************
+
+mgnt2CfgperfModes1 OBJECT-TYPE
+ SYNTAX EkiSynchroMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ PERF Synchro Source :This OID
+ selects the source of the synchronisation
+ (Internal/External). <Help> This
+ object defines the source of the
+ synchronization to operate performance
+ monitoring.
+ "
+ ::= { mgnt2config 29 }
+
+
+
+--- *****************************************************
+--- LEAF for the alarmModelActiv article
+--- *****************************************************
+
+mgnt2CfgalarmModelActiv OBJECT-TYPE
+ SYNTAX Mgnt2AckMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Acknowledge mode :This OID defines
+ the alarms akcnowledge mode <Help>
+ This configuration defines the
+ alarms akcnowledge mode
+ "
+ ::= { mgnt2config 30 }
+
+
+
+--- *****************************************************
+--- LEAF for the networkInput article
+--- *****************************************************
+
+mgnt2CfgnetworkInput OBJECT-TYPE
+ SYNTAX Mgnt2NetMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Network input :This OID selects
+ the connection of the Ethernet
+ Network input to either the switches
+ (2) or the daughter board (1) ,
+ in this case the MGNT can act as
+ a router <Help> This configuration
+ defines the use of the Network
+ input of the front panel
+ "
+ ::= { mgnt2config 31 }
+
+
+
+--- *****************************************************
+--- LEAF for the masterEthMode article
+--- *****************************************************
+
+mgnt2CfgmasterEthMode OBJECT-TYPE
+ SYNTAX Mgnt2MasterEthMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ DHCP Master Ethernet Mode :This
+ OID selects the mode of the Master
+ Ethernet in DHCP mode (2) or in
+ Static Mode(1) <Help> This configuration
+ defines the use of the Master Ethernet
+ Mode
+ "
+ ::= { mgnt2config 32 }
+
+
+
+--- *****************************************************
+--- LEAF for the subnetMode article
+--- *****************************************************
+
+mgnt2CfgsubnetMode OBJECT-TYPE
+ SYNTAX Mgnt2SubnetEthMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ DHCP Subnet Mode :This OID selects
+ the mode of the Subnet in DHCP
+ mode (2) or in Static Mode(1)
+ <Help> This configuration defines
+ the use of the Subnet Mode
+ "
+ ::= { mgnt2config 33 }
+
+
+
+--- *****************************************************
+--- LEAF for the rstpMode article
+--- *****************************************************
+mgnt2CfgrstpMode OBJECT IDENTIFIER ::= { mgnt2config 34 }
+
+
+
+
+mgnt2CfgRstpEnable OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ RSTP Enable :This OID enables
+ the RSTP algorythm <Help> This
+ configuration defines the use of
+ RSTP
+ "
+ ::= { mgnt2CfgrstpMode 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the lldpMode article
+--- *****************************************************
+mgnt2CfglldpMode OBJECT IDENTIFIER ::= { mgnt2config 35 }
+
+
+
+
+mgnt2CfgLldpEnable OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ LLDP Enable :This OID enables
+ the LLDP algorythm <Help> This
+ configuration defines the use of
+ LLDP
+ "
+ ::= { mgnt2CfglldpMode 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the logMode article
+--- *****************************************************
+
+mgnt2CfglogMode OBJECT-TYPE
+ SYNTAX Mgnt2LogFileMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Log Mode :This OID enables the
+ log file mode<Help> This configuration
+ defines the use of the log mod
+ "
+ ::= { mgnt2config 36 }
+
+
+
+--- *****************************************************
+--- LEAF for the nodeMode article
+--- *****************************************************
+mgnt2CfgnodeMode OBJECT IDENTIFIER ::= { mgnt2config 37 }
+
+
+
+
+mgnt2CfgNodeControllerEnable OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Node Controller Mode :This OID
+ enables the node controller mode<Help>
+ This configuration defines the
+ use of the node controller mod
+ "
+ ::= { mgnt2CfgnodeMode 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the unprivilegedUsersMode article
+--- *****************************************************
+mgnt2CfgunprivilegedUsersMode OBJECT IDENTIFIER ::= { mgnt2config 38 }
+
+
+
+
+mgnt2CfgRestrictUnprivilegeUsers OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Restrict Unprivileged Users Rights
+ :This OID enables the restriction
+ of unprivileged user rights to
+ modify their own password <Help>
+ This parameter enables the restriction
+ of unprivileged user rights to
+ modify their own password
+ "
+ ::= { mgnt2CfgunprivilegedUsersMode 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the oscDccLinkUpThreshold article
+--- *****************************************************
+
+mgnt2CfgoscDccLinkUpThreshold OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ OSC/DCC Link Up Thresh. [10-30]s
+ :This OID defines the confirmation
+ threshold to consider an OSC/DCC
+ link as up <Help> This parameter
+ defines the confirmation threshold
+ to consider an OSC/DCC link as
+ up
+ "
+ ::= { mgnt2config 39 }
+
+
+
+--- *****************************************************
+--- LEAF for the oscDccLinkDownThreshold article
+--- *****************************************************
+
+mgnt2CfgoscDccLinkDownThreshold OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ OSC/DCC Link Down Thresh. [2-3]s
+ :This OID defines the confirmation
+ threshold to consider an OSC/DCC
+ link as down <Help> This parameter
+ defines the confirmation threshold
+ to consider an OSC/DCC link as
+ down.
+ "
+ ::= { mgnt2config 40 }
+
+
+
+--- *****************************************************
+--- LEAF for the accountAutoLock article
+--- *****************************************************
+
+mgnt2CfgaccountAutoLock OBJECT-TYPE
+ SYNTAX INTEGER (-1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Account Auto-Lock [-1 / 1-10]
+ err :This OID defines the number
+ of error password to lock an account.
+ This counter is reset on successful
+ login or after an administrator
+ defined period (see Fail count
+ reset) Set to -1 to disables the
+ feature.<Help> This parameter defines
+ the number of error password to
+ lock an account. This counter is
+ reset on successful login or after
+ an administrator defined period
+ (see Fail count reset) Set to -1
+ to disables the feature.
+ "
+ ::= { mgnt2config 41 }
+
+
+
+--- *****************************************************
+--- LEAF for the failCountReset article
+--- *****************************************************
+
+mgnt2CfgfailCountReset OBJECT-TYPE
+ SYNTAX INTEGER (-1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Fail Count Reset [-1 / 1-10] hrs
+ :This OID defines the minimum time
+ (in hours) to reset the failed
+ login counter. This counter is
+ also reset on successful login.
+ Set to -1 to disable the feature.<Help>
+ This parameter defines the minimum
+ time (in hours) to reset the failed
+ login counter. This counter is
+ also reset on successful login.
+ Set to -1 to disable the feature
+ "
+ ::= { mgnt2config 42 }
+
+
+
+--- *****************************************************
+--- LEAF for the ftpMode article
+--- *****************************************************
+mgnt2CfgftpMode OBJECT IDENTIFIER ::= { mgnt2config 44 }
+
+
+
+
+mgnt2CfgFtpEnable OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ FTP Enable :This OID enables the
+ FTP protocol <Help> This configuration
+ enables the FTP protocol
+ "
+ ::= { mgnt2CfgftpMode 1 }
+
+
+
+--- *****************************************************
+--- LEAF for the tftpMode article
+--- *****************************************************
+mgnt2CfgtftpMode OBJECT IDENTIFIER ::= { mgnt2config 45 }
+
+
+
+
+mgnt2CfgTftpEnable OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ TFTP Enable :This OID enables
+ the TFTP protocol <Help> This
+ configuration enables the TFTP
+ protocol
+ "
+ ::= { mgnt2CfgtftpMode 1 }
+
+
+
+
+
+
+
+
+--- *****************************************************
+--- TRAPS
+--- *****************************************************
+
+mgnt2TrapBoardNumber OBJECT-TYPE
+ SYNTAX INTEGER(1..16)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the slot number of the PM that sent the last trap"
+ ::= { mgnt2Traps 50 }
+
+mgnt2TrapSeverity OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the trap severity"
+ ::= { mgnt2Traps 51 }
+
+mgnt2TrapSourcePm OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the mnemonic of the pm who sent a trap"
+ ::= { mgnt2Traps 52 }
+
+mgnt2TrapSourcePortType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the type of the port who sent a trap"
+ ::= { mgnt2Traps 53 }
+
+mgnt2TrapSourcePortNumber OBJECT-TYPE
+ SYNTAX INTEGER(1..16)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the port number of the PM that sent the last trap"
+ ::= { mgnt2Traps 54 }
+
+mgnt2TrapSourceLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the label of the alarm who sent a trap"
+ ::= { mgnt2Traps 55 }
+
+mgnt2TrapSourceValue OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the value of the alarm who sent a trap"
+ ::= { mgnt2Traps 56 }
+
+mgnt2TrapEventLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the label of the event"
+ ::= { mgnt2Traps 57 }
+
+mgnt2TrapNodeControllerIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the IP address of the Node Controller"
+ ::= { mgnt2Traps 58 }
+
+mgnt2TrapChassisId OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the chassis ID "
+ ::= { mgnt2Traps 59 }
+
+mgnt2TrapApi NOTIFICATION-TYPE
+ OBJECTS {mgnt2TrapBoardNumber,mgnt2AlmapiErrorCode}
+ STATUS current
+ --&FILTNAME "API Error"
+ --&ACTIONS { log, minor }
+ --&MATCH { mgnt2TrapBoardNumber "$1", mgnt2AlmapiErrorCode "$2"}
+ --&MESG "API Error number $2 received from Board in slot $1 ($A)"
+ DESCRIPTION "Api error trap with its number"
+ ::= { mgnt2Traps 1 }
+
+mgnt2TrapSwError NOTIFICATION-TYPE
+ OBJECTS {mgnt2AlmFifoCmdError}
+ STATUS current
+ --&FILTNAME "SW Error"
+ --&ACTIONS { log, minor }
+ --&MATCH { mgnt2AlmFifoCmdError "$1"}
+ --&MESG "Software Error detected"
+ DESCRIPTION "Chassis software error other API"
+ ::= { mgnt2Traps 2 }
+
+mgnt2TrapBoardInserted NOTIFICATION-TYPE
+ OBJECTS {mgnt2TrapBoardNumber}
+ STATUS current
+ --&FILTNAME "Board Inserted"
+ --&ACTIONS { log, info }
+ --&MATCH { mgnt2TrapBoardNumber "$1"}
+ --&MESG "Board Inserted in Slot $1 ($A)"
+ DESCRIPTION "A board has been plugged in"
+ ::= { mgnt2Traps 4}
+
+mgnt2TrapBoardRemoved NOTIFICATION-TYPE
+ OBJECTS {mgnt2TrapBoardNumber}
+ STATUS current
+ --&FILTNAME "Board Removed"
+ --&ACTIONS { log, info }
+ --&MATCH { mgnt2TrapBoardNumber "$1"}
+ --&MESG "Board Removed from Slot $1 ($A)"
+ DESCRIPTION "A board has been plugged out"
+ ::= { mgnt2Traps 5 }
+
+mgnt2TrapRestoreConfDone NOTIFICATION-TYPE
+ OBJECTS {mgnt2TrapBoardNumber}
+ STATUS current
+ --&FILTNAME "Config Restored"
+ --&ACTIONS { log, info }
+ --&MATCH { mgnt2TrapBoardNumber "$1"}
+ --&MESG "The Configuration of Board in Slot $1 has been restored ($A)"
+ DESCRIPTION "The Configuration has been restored from the management board"
+ ::= { mgnt2Traps 6 }
+
+mgnt2TrapGlobalPowerFail NOTIFICATION-TYPE
+ OBJECTS {mgnt2AlmDef48b, mgnt2AlmDef48a}
+ STATUS current
+ --&FILTNAME "Power A Fail ON"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmDef48b "off", mgnt2AlmDef48a "on"}
+ --&MESG "Power Input A Fail on Chassis ($A)"
+
+ --&FILTNAME "Power B Fail ON"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmDef48b "on", mgnt2AlmDef48a "off"}
+ --&MESG "Power Input B Fail on Chassis ($A)"
+
+ --&FILTNAME "Power A and B Fail OFF"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "Power A Fail ON", "Power B Fail ON"}
+ --&MATCH { mgnt2AlmDef48b "off", mgnt2AlmDef48a "off"}
+ --&MESG "Power Input A and B Present on Chassis ($A)"
+
+ DESCRIPTION "A global power supply failure has been detected"
+ ::= { mgnt2Traps 8 }
+
+mgnt2TrapFanPowerFail NOTIFICATION-TYPE
+ OBJECTS {mgnt2AlmFanDefFuseB , mgnt2AlmFanDefFuseA, mgnt2AlmFanPwrFail1}
+ STATUS current
+ --&FILTNAME "FAN Fuse A Fail ON"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmFanDefFuseB "off", mgnt2AlmFanDefFuseA "on", mgnt2AlmFanPwrFail1 "*"}
+ --&MESG "Power Input A Fail on FAN ($A)"
+
+ --&FILTNAME "FAN Fuse B Fail ON"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmFanDefFuseB "on", mgnt2AlmFanDefFuseA "off", mgnt2AlmFanPwrFail1 "*"}
+ --&MESG "Power Input B Fail on FAN ($A)"
+
+ --&FILTNAME "FAN Fuse A and B Fail ON"
+ --&ACTIONS { log, critical }
+ --&MATCH { mgnt2AlmFanDefFuseB "on", mgnt2AlmFanDefFuseA "on", mgnt2AlmFanPwrFail1 "*"}
+ --&MESG "Power Input A and B Fail on FAN ($A)"
+
+ --&FILTNAME "FAN Fuse A and B Fail OFF"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "FAN Fuse A Fail ON", "FAN Fuse B Fail ON", "FAN Fuse A and B Fail ON"}
+ --&MATCH { mgnt2AlmFanDefFuseB "off", mgnt2AlmFanDefFuseA "off", mgnt2AlmFanPwrFail1 "off"}
+ --&MESG "Power Input A and B Present on FAN ($A)"
+
+ --&FILTNAME "FAN Power Fail"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmFanDefFuseB "off", mgnt2AlmFanDefFuseA "off", mgnt2AlmFanPwrFail1 "on"}
+ --&MESG "Power Converter Fail on FAN ($A)"
+
+ DESCRIPTION "A Fan power supply failure has been detected"
+ ::= { mgnt2Traps 9 }
+
+mgnt2TrapGigmPowerFail NOTIFICATION-TYPE
+ OBJECTS {mgnt2AlmMgntDefFuseA, mgnt2AlmMgntDefFuseB}
+ STATUS current
+ --&FILTNAME "Fuse B Fail ON"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmMgntDefFuseA "off", mgnt2AlmMgntDefFuseB "on"}
+ --&MESG "Power Input B Fail on MGNT ($A)"
+
+ --&FILTNAME "Fuse A Fail ON"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmMgntDefFuseA "on", mgnt2AlmMgntDefFuseB "off"}
+ --&MESG "Power Input A Fail on MGNT ($A)"
+
+ --&FILTNAME "Fuse A and B Fail OFF"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "Fuse B Fail ON", "Fuse A Fail ON"}
+ --&MATCH { mgnt2AlmMgntDefFuseA "off", mgnt2AlmMgntDefFuseB "off"}
+ --&MESG "Power Input A and B Present on MGNT ($A)"
+
+ DESCRIPTION "A power supply default has been detected in the management board"
+ ::= { mgnt2Traps 10 }
+
+mgnt2TrapFanFail NOTIFICATION-TYPE
+ OBJECTS {mgnt2AlmPbFan1Fail, mgnt2AlmPbFan2Fail, mgnt2AlmPbFan3Fail, mgnt2AlmPbFan4Fail, mgnt2AlmPbFan5Fail, mgnt2AlmPbFan6Fail}
+ STATUS current
+ --&FILTNAME "All trap Fail"
+ --&ACTIONS { log, critical }
+ --&MATCH { mgnt2AlmPbFan1Fail "on", mgnt2AlmPbFan2Fail "on", mgnt2AlmPbFan3Fail "on", mgnt2AlmPbFan4Fail "on", mgnt2AlmPbFan5Fail "on", mgnt2AlmPbFan6Fail "on"}
+ --&MESG "The FAN tray is in Failure condition (all FAN fail) ($A)"
+
+ --&FILTNAME "FAN 1 Fail"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmPbFan1Fail "on", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
+ --&MESG "Fan number 1 Fail on FAN Module ($A)"
+
+ --&FILTNAME "FAN 2 Fail"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "on", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
+ --&MESG "Fan number 2 Fail on FAN Module ($A)"
+
+ --&FILTNAME "FAN 3 Fail"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "on", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
+ --&MESG "Fan number 3 Fail on FAN Module ($A)"
+
+ --&FILTNAME "FAN 4 Fail"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "on", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
+ --&MESG "Fan number 4 Fail on FAN Module ($A)"
+
+ --&FILTNAME "FAN 5 Fail"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "on", mgnt2AlmPbFan6Fail "*"}
+ --&MESG "Fan number 5 Fail on FAN Module ($A)"
+
+ --&FILTNAME "FAN 6 Fail"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "on"}
+ --&MESG "Fan number 6 Fail on FAN Module ($A)"
+
+ --&FILTNAME "FAN Fail OFF"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "All trap Fail"}
+ --&MATCH { mgnt2AlmPbFan1Fail "off", mgnt2AlmPbFan2Fail "off", mgnt2AlmPbFan3Fail "off", mgnt2AlmPbFan4Fail "off", mgnt2AlmPbFan5Fail "off", mgnt2AlmPbFan6Fail "off"}
+ --&MESG "The FAN tray is fully operational (no FAN fail)"
+
+ DESCRIPTION "A Fan failure has been detected"
+ ::= { mgnt2Traps 11 }
+
+mgnt2TrapLogFileFull NOTIFICATION-TYPE
+ OBJECTS {mgnt2TrapBoardNumber, mgnt2AlmLog80Full, mgnt2AlmLogFileFull}
+ STATUS current
+ --&FILTNAME "Log almost full"
+ --&ACTIONS { log, warning }
+ --&MATCH { mgnt2TrapBoardNumber "$1", mgnt2AlmLog80Full "on", mgnt2AlmLogFileFull "off"}
+ --&MESG "The log of Board in slot $1 is 80% full ($A)"
+
+ --&FILTNAME "Log Full"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2TrapBoardNumber "$1", mgnt2AlmLog80Full "*", mgnt2AlmLogFileFull "on"}
+ --&MESG "The log of Board in slot $1 is Full ($A)"
+ DESCRIPTION "Indicates that the corresponding log file is almost full"
+ ::= { mgnt2Traps 20 }
+
+mgnt2TrapAlarm NOTIFICATION-TYPE
+ OBJECTS {mgnt2TrapSeverity, mgnt2TrapSourcePm, mgnt2TrapBoardNumber, mgnt2TrapSourcePortType, mgnt2TrapSourcePortNumber, mgnt2TrapSourceLabel, mgnt2TrapSourceValue, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
+ STATUS current
+ --&FILTNAME "critical clear"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "critical detect" }
+ --&MATCH { mgnt2TrapSeverity "Critical", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
+ --&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
+
+ --&FILTNAME "critical detect"
+ --&ACTIONS { log, critical }
+ --&MATCH { mgnt2TrapSeverity "Critical", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
+ --&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
+
+ --&FILTNAME "major clear"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "major detect" }
+ --&MATCH { mgnt2TrapSeverity "Major", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
+ --&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
+
+ --&FILTNAME "major detect"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2TrapSeverity "Major", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
+ --&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
+
+ --&FILTNAME "minor clear"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "minor detect" }
+ --&MATCH { mgnt2TrapSeverity "Minor", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
+ --&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
+
+ --&FILTNAME "minor detect"
+ --&ACTIONS { log, minor }
+ --&MATCH { mgnt2TrapSeverity "Minor", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
+ --&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
+
+ --&FILTNAME "warning clear"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "warning detect" }
+ --&MATCH { mgnt2TrapSeverity "Warning", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
+ --&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
+
+ --&FILTNAME "warning detect"
+ --&ACTIONS { log, minor }
+ --&MATCH { mgnt2TrapSeverity "Warning", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
+ --&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
+
+ --&FILTNAME "indeterminate clear"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "indeterminate detect" }
+ --&MATCH { mgnt2TrapSeverity "Indeterminate", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
+ --&MESG "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"
+
+ --&FILTNAME "indeterminate detect"
+ --&ACTIONS { log, minor }
+ --&MATCH { mgnt2TrapSeverity "Indeterminate", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
+ --&MESG "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
+ DESCRIPTION "Indicates that an alarm state has changed"
+ ::= { mgnt2Traps 30 }
+
+mgnt2TrapEvent NOTIFICATION-TYPE
+ OBJECTS {mgnt2TrapBoardNumber, mgnt2TrapEventLabel, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
+ STATUS current
+ --&FILTNAME "event"
+ --&ACTIONS { log, info }
+ --&CLEARS { "critical detect" }
+ --&MATCH {mgnt2TrapBoardNumber "$1", mgnt2TrapEventLabel "$2" }
+ --&MESG "$2 (Slot $1) ($A)"
+ DESCRIPTION "Indicates that an event has occured"
+ ::= { mgnt2Traps 31 }
+
+mgnt2TrapControl NOTIFICATION-TYPE
+ OBJECTS {mgnt2TrapSourcePm, mgnt2TrapBoardNumber, mgnt2TrapSourcePortType, mgnt2TrapSourcePortNumber, mgnt2TrapSourceLabel, mgnt2TrapSourceValue, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
+ STATUS current
+ --&FILTNAME "control sent"
+ --&ACTIONS { log, info }
+ --&MATCH { mgnt2TrapSourcePm "$1", mgnt2TrapBoardNumber "$2", mgnt2TrapSourcePortType "$3", mgnt2TrapSourcePortNumber "$4", mgnt2TrapSourceLabel "$5" }
+ --&MESG "Controls ($5) has been set to $6 on $1 (Slot $2) on $3 ($A)"
+
+ DESCRIPTION "Indicates that a control has been set to the module"
+ ::= { mgnt2Traps 32 }
+
+mgnt2TrapConfig NOTIFICATION-TYPE
+ OBJECTS {mgnt2TrapSourcePm, mgnt2TrapBoardNumber, mgnt2TrapSourcePortType, mgnt2TrapSourcePortNumber, mgnt2TrapSourceLabel, mgnt2TrapSourceValue, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
+ STATUS current
+ --&FILTNAME "config sent"
+ --&ACTIONS { log, info }
+ --&MATCH { mgnt2TrapSourcePm "$1", mgnt2TrapBoardNumber "$2", mgnt2TrapSourcePortType "$3", mgnt2TrapSourcePortNumber "$4", mgnt2TrapSourceLabel "$5"}
+ --&MESG "Config Word ($5) has been set to $6 on $1 (Slot $2) on $3 ($A)"
+
+ DESCRIPTION "Indicates that a config word has been changed"
+ ::= { mgnt2Traps 33 }
+
+
+
+
+
+
+END
diff --git a/MIBS/ekinops/EKINOPS-MGNT2-NMS-MIB b/MIBS/ekinops/EKINOPS-MGNT2-NMS-MIB
new file mode 100644
index 0000000..fde6a4f
--- /dev/null
+++ b/MIBS/ekinops/EKINOPS-MGNT2-NMS-MIB
@@ -0,0 +1,1531 @@
+-- *****************************************************************
+-- MGNT2-NMS.TXT: MIB
+--
+--MIB Part Number: 3MI01003AAAE
+--MIB Version:01
+--
+-- Copyright (c) 2009 by Ekinops
+-- All rights reserved.
+--
+-- *****************************************************************
+
+EKINOPS-MGNT2-NMS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ ekinops,
+ EkiOnOff
+ FROM EKINOPS-MIB
+
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ NOTIFICATION-TYPE,
+ Unsigned32,
+ Counter32,
+ Integer32,
+ IpAddress
+ FROM SNMPv2-SMI
+
+ SnmpUDPAddress
+ FROM SNMPv2-TM
+
+ TEXTUAL-CONVENTION,
+ DisplayString,
+ DateAndTime,
+ RowStatus
+ FROM SNMPv2-TC
+
+ OBJECT-GROUP,
+ NOTIFICATION-GROUP,
+ MODULE-COMPLIANCE
+ FROM SNMPv2-CONF;
+
+mgnt2NMS MODULE-IDENTITY
+ LAST-UPDATED "201511120000Z"
+ ORGANIZATION "Ekinops"
+ CONTACT-INFO
+ "Ekinops
+ 3, rue Blaise Pascal
+ F-22300 Lannion / FRANCE
+
+ Tel : +33 (0)2 96 05 00 30
+ Fax : +33 (0)2 96 48 62 39
+
+ E-mail: support@ekinops.fr"
+ DESCRIPTION
+ "MIB for managing Ekinops 360 Network Element via a NMS."
+ REVISION "200907261500Z"
+ DESCRIPTION
+ "Initial version."
+ REVISION "201504130000Z"
+ DESCRIPTION
+ "Add bindings for Node Controller
+ Add objects for Linux download
+ Add objects for SoftwareDownload"
+ REVISION "201511120000Z"
+ DESCRIPTION
+ "Appropriate Limits on SYNTAX of some OBJECT-TYPE)"
+ REVISION "201606060000Z"
+ DESCRIPTION
+ "new synthesisAlarm alarmtype "
+
+ ::= { ekinops 1000 }
+
+
+
+mgnt2NMSMibObject OBJECT IDENTIFIER ::= { mgnt2NMS 1 }
+
+mgnt2SupportMCConf OBJECT IDENTIFIER ::= { mgnt2NMS 2 }
+mgnt2SupportMCCompl OBJECT IDENTIFIER ::= { mgnt2SupportMCConf 1 }
+mgnt2SupportMCGroup OBJECT IDENTIFIER ::= { mgnt2SupportMCConf 2 }
+
+--
+-- TEXTUAL-CONVENTION
+
+-- Mgnt2NotificationId
+
+Mgnt2NotificationId ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This object contains a unique event/alarm numbering."
+ SYNTAX Counter32
+
+
+-- Mgnt2AlmProbableCause
+
+Mgnt2AlmProbableCause ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This object is used to specify the OID of the probable cause of the
+ generated notification."
+ SYNTAX INTEGER {
+ other (1),
+ adapterError (2),
+ applicationSubsystemFailure (3),
+ bandwidthReduced (4),
+ callEstablishmentError (5),
+ communicationsProtocolError (6),
+ communicationsSubsystemFailure (7),
+ configurationOrCustomizationError (8),
+ congestion (9),
+ corruptData (10),
+ cpuCyclesLimitExceeded (11),
+ dataSetOrModemError (12),
+ degradedSignal (13),
+ dteDceInterfaceError (14),
+ enclosureDoorOpen (15),
+ equipmentMalfunction (16),
+ excessiveVibration (17),
+ fileError (18),
+ fireDetected (19),
+ floodDetected (20),
+ framingError (21),
+ heatingVentCoolingSystemProblem (22),
+ humidityUnacceptable (23),
+ inputOutputDeviceError (24),
+ inputDeviceError (25),
+ lanError (26),
+ leakDetected (27),
+ localNodeTransmissionError (28),
+ lossOfFrame (29),
+ lossOfSignal (30),
+ materialSupplyExhausted (31),
+ multiplexerProblem (32),
+ outOfMemory (33),
+ ouputDeviceError (34),
+ performanceDegraded (35),
+ powerProblem (36),
+ pressureUnacceptable (37),
+ processorProblem (38),
+ pumpFailure (39),
+ queueSizeExceeded (40),
+ receiveFailure (41),
+ receiverFailure (42),
+ remoteNodeTransmissionError (43),
+ resourceAtOrNearingCapacity (44),
+ responseTimeExecessive (45),
+ retransmissionRateExcessive (46),
+ softwareError (47),
+ softwareProgramAbnormallyTerminated (48),
+ softwareProgramError (49),
+ storageCapacityProblem (50),
+ temperatureUnacceptable (51),
+ thresholdCrossed (52),
+ timingProblem (53),
+ toxicLeakDetected (54),
+ transmitFailure (55),
+ transmitterFailure (56),
+ underlyingResourceUnavailable (57),
+ versionMismatch (58),
+ authenticationFailure (59),
+ breachOfConfidentiality (60),
+ cableTamper (61),
+ delayedInformation (62),
+ denialOfService (63),
+ duplicateInformation (64),
+ informationMissing (65),
+ informationModificationDetected (66),
+ informationOutOfSequence (67),
+ intrusionDetection (68),
+ keyExpired (69),
+ nonRepudiationFailure (70),
+ outOfHoursActivity (71),
+ outOfService (72),
+ proceduralError (73),
+ unauthorizedAccessAttempt (74),
+ unexpectedInformation (75),
+ informationalStatus(1000)
+ }
+
+-- Mgnt2ObjectClassId
+
+Mgnt2ObjectClassId ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This object represents the SNMP entry table
+ object identity (Managed Object Class) of the instance
+ where the event/alarm occured."
+ -- SYNTAX Integer32
+ SYNTAX INTEGER {
+ other(1),
+ unknown(2),
+ chassis(3),
+ backplane(4),
+ container(5), -- e.g., chassis slot or daughter-card holder
+ powerSupply(6),
+ fan(7),
+ sensor(8),
+ module(9), -- e.g., plug-in card or daughter-card
+ port(10),
+ stack(11), -- e.g., stack of multiple chassis entities
+ cpu(12),
+ mgnt(13)
+ }
+
+
+-- Mgnt2AlmSeverity
+Mgnt2AlmSeverity ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the severity of
+ an alarm stored in alarm Table.
+ The cleared severity is not foreseen inside APT table."
+ SYNTAX INTEGER {
+ critical(1),
+ major(2),
+ minor(3),
+ warning(4),
+ indeterminate(5),
+ cleared(6)
+ }
+
+
+-- Mgnt2AlmType
+Mgnt2AlmType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the type of
+ an alarm stored in alarm Table."
+ SYNTAX INTEGER {
+ other (1),
+ communicationsAlarm (2),
+ qualityOfServiceAlarm (3),
+ processingErrorAlarm (4),
+ equipmentAlarm (5),
+ environmentalAlarm (6),
+ integrityViolation (7),
+ operationalViolation (8),
+ physicalViolation (9),
+ securityServiceOrMechanismViolation (10),
+ timeDomainViolation (11),
+ synthesisAlarm (12)
+ }
+
+
+-- Mgnt2EventType
+Mgnt2EventType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the type of
+ an event stored in event log Table."
+ SYNTAX INTEGER {
+ objectCreation (1),
+ objectDeletion (2),
+ attributeValueChange (3),
+ stateChange (4),
+ activityLog (5)
+ }
+
+
+Mgnt2EventSourceType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This object indicates the event source."
+ SYNTAX INTEGER {
+ event (1),
+ control (2),
+ config (3)
+}
+
+
+-- Mgnt2LacState
+Mgnt2LacState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This is the State attribute for the Local Access Control.
+ This attribute can be set:
+ - by Agent at creation time to accessRequested
+ - by EML to the values accessGranted or accessDenied"
+ SYNTAX INTEGER {
+ accessDenied (0),
+ accessRequested (1),
+ accessGrantedCraft (2),
+ accessGrantedCli (3),
+ accessGrantedSnmp (4)
+ }
+
+
+-- Mgnt2ServerAddress
+Mgnt2ServerAddress ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This textual convention define a server adress.
+ It can be either only the IP address of the server if
+ server is running on default port. ex : '10.0.17.57'
+ or IP adress and server port separated by ':' allowing to
+ connect a server running on unusual port. ex : '10.0.17.57:5041'
+ "
+ SYNTAX OCTET STRING
+
+-- Mgnt2UploadDownloadFileEncoding
+Mgnt2UploadDownloadFileEncoding ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This describes the agent's capability in term of which
+ file encoding styles it supports."
+ SYNTAX INTEGER {
+ other(1),
+ ascii(2),
+ xml(3),
+ bin(4),
+ data(5)
+}
+
+-- Mgnt2UploadDownloadFileCompression
+Mgnt2UploadDownloadFileCompression ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This describes the agent's capability in term of which
+ file compression styles it supports."
+ SYNTAX INTEGER {
+ noCompression(1),
+ bzip(2),
+ gzip(3)
+}
+
+
+-- Mgnt2UploadDownloadActionStatus
+Mgnt2UploadDownloadActionStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This object indicates the download status and allow to start download."
+ SYNTAX INTEGER {
+ success (0),
+ start (1), -- (value set by a manager to start ftp)
+ inProgress (2),
+ failed (3),
+ automatic (4), -- used when NE is master to download file(s) (ie : load software packages)
+ abort (5) -- (value set by a manager to abort ftp)
+}
+
+
+-- Mgnt2UploadDownloadErrorCode
+Mgnt2UploadDownloadErrorCode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This object indicates the upload/download error code."
+ SYNTAX INTEGER {
+ noError (0),
+ missingLogin (1),
+ missingPassword (2),
+ missingFile (3),
+ serverUnreachable (4),
+ badPassword (5),
+ noSpaceLeft (6),
+ corruptedFile (7),
+ canceled (8), -- Error code when ftp has been aborted by manager
+ noWriteAccess (9) -- Manager has no write access
+ undefinedError (10), -- internal agent error
+ accessViolation (11), -- tftp error
+ fileExist (12), -- tftp error : file already exists
+ wrongDirection (13), -- cannot send to NMS a pmPackage
+ wrongName (14),
+ wrongCompression (15)
+}
+
+
+-- Mgnt2SoftwareDownloadActionStatus
+Mgnt2SoftwareDownloadActionStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This object indicates the upload/download error code."
+ SYNTAX INTEGER {
+ noError (0),
+ missingLogin (1),
+ missingPassword (2),
+ missingFile (3),
+ serverUnreachable (4),
+ badPassword (5),
+ noSpaceLeft (6),
+ corruptedFile (7),
+ canceled (8), -- Error code when ftp has been aborted by manager
+ noWriteAccess (9) -- Manager has no write access
+}
+
+
+Mgnt2DownloadFileType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This object indicates the the file type to download/upload."
+ SYNTAX INTEGER {
+ pmPackage (0),
+ mgntPackage (1),
+ configurationFile (2),
+ logFile (3),
+ perfFile (4),
+ wavePlan (5),
+ adminPackage (6)
+}
+
+--
+-- Alarm Management
+
+-- Active Alarm List: mgnt2ActiveAlarmTable
+
+mgnt2ActiveAlmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2ActiveAlmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines the MGNT2-NMS Active Alarm table
+ This table is used by Agent in order to store the active alarms,
+ managing system can only read them."
+::= { mgnt2NMSMibObject 1 }
+
+
+mgnt2ActiveAlmEntry OBJECT-TYPE
+ SYNTAX Mgnt2ActiveAlmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a single alarm in the Active Alarm table.
+ Entries in this table are created by SNMP NE and will be
+ automatically deleted by SNMP NE when it is
+ genereted a cleared-alarm."
+ INDEX { mgnt2ActiveAlmNotificationId}
+::= { mgnt2ActiveAlmTable 1 }
+
+
+Mgnt2ActiveAlmEntry ::= SEQUENCE {
+ mgnt2ActiveAlmNotificationId Mgnt2NotificationId,
+ mgnt2ActiveAlmObjectClassIdentifier Mgnt2ObjectClassId,
+ -- mgnt2ActiveAlmObjectClassInstance Mgnt2ObjectInstanceId, OBJECT IDENTIFIER
+ -- ekinops addressing
+ mgnt2ActiveAlmSourcePm DisplayString,
+ mgnt2ActiveAlmBoardNumber Integer32,
+ mgnt2ActiveAlmSourcePortType DisplayString,
+ mgnt2ActiveAlmSourcePortNumber Integer32,
+ mgnt2ActiveAlmProbableCause Mgnt2AlmProbableCause,
+ mgnt2ActiveAlmSeverity Mgnt2AlmSeverity,
+ mgnt2ActiveAlmSpecificProblem DisplayString,
+ mgnt2ActiveAlmAdditionalText DisplayString,
+ mgnt2ActiveAlmType Mgnt2AlmType,
+ mgnt2ActiveAlmTime DateAndTime,
+
+--Rajout binding Node Controller 1 avril 2015
+
+ mgnt2ActiveAlmNodeControllerIpAddress IpAddress,
+ mgnt2ActiveAlmChassisId DisplayString
+
+--Fin
+}
+
+
+mgnt2ActiveAlmNotificationId OBJECT-TYPE
+ SYNTAX Mgnt2NotificationId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions."
+::= { mgnt2ActiveAlmEntry 1 }
+
+mgnt2ActiveAlmProbableCause OBJECT-TYPE
+ SYNTAX Mgnt2AlmProbableCause
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions."
+::= { mgnt2ActiveAlmEntry 2 }
+
+mgnt2ActiveAlmObjectClassIdentifier OBJECT-TYPE
+ SYNTAX Mgnt2ObjectClassId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions."
+::= { mgnt2ActiveAlmEntry 3 }
+
+
+mgnt2ActiveAlmSourcePm OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "See textual conventions."
+::= { mgnt2ActiveAlmEntry 4 }
+
+
+mgnt2ActiveAlmBoardNumber OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "See textual conventions."
+::= { mgnt2ActiveAlmEntry 5 }
+
+
+mgnt2ActiveAlmSourcePortType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the type of the port who sent a trap"
+::= { mgnt2ActiveAlmEntry 6 }
+
+
+mgnt2ActiveAlmSourcePortNumber OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the port number of the PM that sent the last trap"
+ ::= { mgnt2ActiveAlmEntry 7 }
+
+mgnt2ActiveAlmSeverity OBJECT-TYPE
+ SYNTAX Mgnt2AlmSeverity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions."
+::= { mgnt2ActiveAlmEntry 8 }
+
+mgnt2ActiveAlmSpecificProblem OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object contains the alarm specific problem description.
+ Indicates further refinements to the problem identified
+ by the alarm type. If more than one specific problem
+ is described in this object, the problem descriptions are
+ separated by <;> characters. The format of the displayString
+ is for further study."
+::= { mgnt2ActiveAlmEntry 9 }
+
+
+mgnt2ActiveAlmAdditionalText OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ ""
+::= { mgnt2ActiveAlmEntry 10 }
+
+--mgnt2ActiveAlmType OBJECT-TYPE
+-- SYNTAX DisplayString
+-- MAX-ACCESS read-only
+-- STATUS current
+-- DESCRIPTION
+-- ""
+--::= { mgnt2ActiveAlmEntry 11 }
+
+mgnt2ActiveAlmType OBJECT-TYPE
+ SYNTAX Mgnt2AlmType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual convention"
+::= { mgnt2ActiveAlmEntry 11 }
+
+
+mgnt2ActiveAlmTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates when the alarm has been generated."
+::= { mgnt2ActiveAlmEntry 12 }
+
+
+--Rajout binding Node Controller 1 avril 2015
+
+mgnt2ActiveAlmNodeControllerIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This OID gives the IP address of the Node Controller"
+::= { mgnt2ActiveAlmEntry 13 }
+
+
+mgnt2ActiveAlmChassisId OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This OID gives the chassis ID "
+::= { mgnt2ActiveAlmEntry 14 }
+
+-- Fin
+
+
+
+
+
+-- Alarm log table: mgnt2AlmLogTable
+
+mgnt2AlmLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2AlmLogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines the Alarm Log table.
+ It is used to store the alarms generated by SNMP NE."
+::= { mgnt2NMSMibObject 2 }
+
+mgnt2AlmLogEntry OBJECT-TYPE
+ SYNTAX Mgnt2AlmLogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry contains information about single alarm notification.
+ Entries in this table are created automatically by
+ Agent and they are never deleted because the Log behavior is
+ automatically set to Wrap, hence when no more entry will be
+ created (log full) new log entry will cause the deletion
+ of the oldest one."
+ INDEX { mgnt2AlmLogNotificationId }
+::= { mgnt2AlmLogTable 1 }
+
+
+Mgnt2AlmLogEntry ::= SEQUENCE {
+ mgnt2AlmLogNotificationId Mgnt2NotificationId,
+ mgnt2AlmLogObjectClassIdentifier Mgnt2ObjectClassId,
+ -- mgnt2AlmLogObjectInstanceIdentifier Mgnt2ObjectInstanceId,
+ mgnt2AlmLogSourcePm DisplayString,
+ mgnt2AlmLogBoardNumber Integer32,
+ mgnt2AlmLogSourcePortType DisplayString,
+ mgnt2AlmLogSourcePortNumber Integer32,
+ mgnt2AlmLogProbableCause Mgnt2AlmProbableCause,
+ mgnt2AlmLogSeverity Mgnt2AlmSeverity,
+ mgnt2AlmLogSpecificProblem DisplayString,
+ mgnt2AlmLogAdditionalText DisplayString,
+ mgnt2AlmLogAlarmType Mgnt2AlmType,
+ mgnt2AlmLogTime DateAndTime,
+
+--Rajout binding Node Controller 1 avril 2015
+
+ mgnt2AlmLogNodeControllerIpAddress IpAddress,
+ mgnt2AlmLogChassisId DisplayString
+
+--Fin
+ }
+
+
+
+mgnt2AlmLogNotificationId OBJECT-TYPE
+ SYNTAX Mgnt2NotificationId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions."
+::= { mgnt2AlmLogEntry 1 }
+
+mgnt2AlmLogProbableCause OBJECT-TYPE
+ SYNTAX Mgnt2AlmProbableCause
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions."
+::= { mgnt2AlmLogEntry 2 }
+
+mgnt2AlmLogObjectClassIdentifier OBJECT-TYPE
+ SYNTAX Mgnt2ObjectClassId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions."
+::= { mgnt2AlmLogEntry 3 }
+
+
+mgnt2AlmLogSourcePm OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "See textual conventions."
+::= { mgnt2AlmLogEntry 4 }
+
+
+mgnt2AlmLogBoardNumber OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "See textual conventions."
+::= { mgnt2AlmLogEntry 5 }
+
+
+mgnt2AlmLogSourcePortType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the type of the port who sent a trap"
+::= { mgnt2AlmLogEntry 6 }
+
+
+mgnt2AlmLogSourcePortNumber OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the port number of the PM that sent the last trap"
+ ::= { mgnt2AlmLogEntry 7 }
+
+
+mgnt2AlmLogSeverity OBJECT-TYPE
+ SYNTAX Mgnt2AlmSeverity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The perceived severity of the alarm, as specified by
+ the agent that generated it."
+::= { mgnt2AlmLogEntry 8 }
+
+mgnt2AlmLogSpecificProblem OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions.
+ This object is only present if it was included in the
+ alarm trap corresponding to this AlarmLog entry."
+::= { mgnt2AlmLogEntry 9 }
+
+mgnt2AlmLogAdditionalText OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ ""
+::= { mgnt2AlmLogEntry 10 }
+
+mgnt2AlmLogAlarmType OBJECT-TYPE
+ SYNTAX Mgnt2AlmType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ ""
+::= { mgnt2AlmLogEntry 11 }
+
+mgnt2AlmLogTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates when the alarm has been generated."
+::= { mgnt2AlmLogEntry 13 }
+
+
+
+
+
+--Rajout binding Node Controller 1 avril 2015
+
+mgnt2AlmLogNodeControllerIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This OID gives the IP address of the Node Controller"
+::= { mgnt2AlmLogEntry 14 }
+
+
+mgnt2AlmLogChassisId OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This OID gives the chassis ID "
+::= { mgnt2AlmLogEntry 15 }
+
+-- Fin
+
+
+
+
+
+--
+-- Event Management
+
+-- Event log table: mgnt2EventLogTable
+
+mgnt2EventLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2EventLogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contain information about single event notification
+ not alarm. Entries in this table are created automatically by
+ Agent and they are never deleted because the Log behavior is
+ automatically set to Wrap, hence when no more entry will be
+ created (log full) new log entry will cause the deletion
+ of the oldest one."
+::= { mgnt2NMSMibObject 3 }
+
+mgnt2EventLogEntry OBJECT-TYPE
+ SYNTAX Mgnt2EventLogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the mgnt2EventLogTable"
+ INDEX { mgnt2EventLogNotificationId }
+::= { mgnt2EventLogTable 1 }
+
+Mgnt2EventLogEntry ::= SEQUENCE {
+ mgnt2EventLogNotificationId Mgnt2NotificationId,
+ mgnt2EventLogObjectClassIdentifier Mgnt2ObjectClassId,
+ -- mgnt2EventLogObjectInstanceIdentifier Mgnt2ObjectInstanceId,
+ mgnt2EventLogSourcePm DisplayString,
+ mgnt2EventLogBoardNumber Integer32,
+ mgnt2EventLogSourcePortType DisplayString,
+ mgnt2EventLogSourcePortNumber Integer32,
+ mgnt2EventLogEventType Mgnt2EventType,
+ mgnt2EventLogSourceType Mgnt2EventSourceType,
+ mgnt2EventLogReason DisplayString,
+ mgnt2EventLogAdditionalText DisplayString,
+ mgnt2EventLogTime DateAndTime,
+
+--Rajout binding Node Controller 1 avril 2015
+
+ mgnt2EventLogNodeControllerIpAddress IpAddress,
+ mgnt2EventLogChassisId DisplayString
+
+--Fin
+
+
+ }
+
+
+mgnt2EventLogNotificationId OBJECT-TYPE
+ SYNTAX Mgnt2NotificationId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions."
+::= { mgnt2EventLogEntry 1 }
+
+mgnt2EventLogObjectClassIdentifier OBJECT-TYPE
+ SYNTAX Mgnt2ObjectClassId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual conventions."
+::= { mgnt2EventLogEntry 2 }
+
+--mgnt2EventLogObjectInstanceIdentifier OBJECT-TYPE
+-- SYNTAX Mgnt2ObjectInstanceId
+-- MAX-ACCESS read-only
+-- STATUS current
+-- DESCRIPTION
+-- "See textual conventions."
+--::= { mgnt2EventLogEntry 3 }
+
+mgnt2EventLogSourcePm OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "See textual conventions."
+::= { mgnt2EventLogEntry 4 }
+
+
+mgnt2EventLogBoardNumber OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "See textual conventions."
+::= { mgnt2EventLogEntry 5 }
+
+
+mgnt2EventLogSourcePortType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the type of the port who sent a trap"
+::= { mgnt2EventLogEntry 6 }
+
+
+mgnt2EventLogSourcePortNumber OBJECT-TYPE
+ SYNTAX Integer32(1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This OID gives the port number of the PM that sent the last trap"
+ ::= { mgnt2EventLogEntry 7 }
+
+mgnt2EventLogEventType OBJECT-TYPE
+ SYNTAX Mgnt2EventType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object describes the type of the event logged."
+::= { mgnt2EventLogEntry 8 }
+
+mgnt2EventLogSourceType OBJECT-TYPE
+ SYNTAX Mgnt2EventSourceType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object describes the source type of the event logged."
+::= { mgnt2EventLogEntry 9 }
+
+
+mgnt2EventLogReason OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ ""
+::= { mgnt2EventLogEntry 10 }
+
+
+mgnt2EventLogAdditionalText OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ ""
+::= { mgnt2EventLogEntry 11 }
+
+mgnt2EventLogTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates when the event has been generated."
+::= { mgnt2EventLogEntry 12 }
+
+
+
+
+--Rajout binding Node Controller 1 avril 2015
+
+mgnt2EventLogNodeControllerIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This OID gives the IP address of the Node Controller"
+::= { mgnt2EventLogEntry 13 }
+
+
+mgnt2EventLogChassisId OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This OID gives the chassis ID "
+::= { mgnt2EventLogEntry 14 }
+
+-- Fin
+
+
+
+
+--
+-- Re
+
+--
+-- Upload/Download file
+
+mgnt2UploadDownload OBJECT IDENTIFIER ::= { mgnt2NMSMibObject 5 }
+
+mgnt2UploadDownloadFilename OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "software file name including eventually file path"
+::= { mgnt2UploadDownload 1 }
+
+mgnt2UploadDownloadAddress OBJECT-TYPE
+ SYNTAX Mgnt2ServerAddress
+ -- SYNTAX SnmpUDPAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ -- "Address of the server on which software file is located
+ -- Represents a UDP address:
+ -- octets contents encoding
+ -- 1-4 IP-address network-byte order
+ -- 5-6 UDP-port network-byte order"
+ "See textual convention"
+::= { mgnt2UploadDownload 2 }
+
+mgnt2UploadDownloadLogin OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Login for ftp"
+::= { mgnt2UploadDownload 3 }
+
+
+mgnt2UploadDownloadPasswd OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Password for ftp.
+ A manager sets this value with ftp account password using SNMP.
+ For security reasons if a manager reads this entry, NE must return an empty string (instead of password).
+ "
+::= { mgnt2UploadDownload 4 }
+
+mgnt2UploadDownloadTxRetries OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Communication retries between the Client and Server.
+ <0> denotes one (first) transmission and no retries in case of failure
+ no re-transmissions are required."
+::= { mgnt2UploadDownload 5 }
+
+
+mgnt2UploadDownloadActionStatus OBJECT-TYPE
+ SYNTAX Mgnt2UploadDownloadActionStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Entry used to know status of upload/ download to start
+ upload/download operation (Action)"
+::= { mgnt2UploadDownload 6 }
+
+
+mgnt2UploadDownloadErrorCode OBJECT-TYPE
+ SYNTAX Mgnt2UploadDownloadErrorCode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "See textual convention"
+::= { mgnt2UploadDownload 7 }
+
+mgnt2UploadDownloadDirection OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ FTP direction :
+ 0 : From NE to external server
+ 1 : From external server to NE
+ "
+::= { mgnt2UploadDownload 8 }
+
+
+mgnt2UploadDownloadProgress OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Percentage of software file(s) downloaded.
+ Only significant in case mgnt2UploadDownloadActionStatus is 'inProgress' or 'automatic'
+ "
+::= { mgnt2UploadDownload 9 }
+
+mgnt2UploadDownloadReceivedFiles OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Number of files received during upload/download (significant when status is 'automatic')"
+::= { mgnt2UploadDownload 10 }
+
+
+mgnt2UploadDownloadRemainingFiles OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Number of files remaining for upload/download (significant when status is 'automatic')"
+::= { mgnt2UploadDownload 11 }
+
+mgnt2UploadDownloadFileType OBJECT-TYPE
+ SYNTAX Mgnt2DownloadFileType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "File type to download/upload :
+ - 0 : pmPackage
+ - 1 : mgntPackage
+ - 2 : configurationFile
+ - 3 : logFile
+ - 4 : perfFile"
+::= { mgnt2UploadDownload 12 }
+
+
+mgnt2UploadDownloadFileCompression OBJECT-TYPE
+ SYNTAX Mgnt2UploadDownloadFileCompression
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "See Textual convention"
+::= { mgnt2UploadDownload 13 }
+
+
+mgnt2UploadDownloadDeleteLastFile OBJECT-TYPE
+ SYNTAX EkiOnOff
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ ""
+::= { mgnt2UploadDownload 14 }
+
+
+--
+-- Configuration Management
+
+mgnt2Configuration OBJECT IDENTIFIER ::= { mgnt2NMSMibObject 6 }
+
+mgnt2ConfigurationChecksum OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Entry used to identify uniquely configuration file content.
+ (Used to check alignement between NE configuration and configuration known by NM)"
+::= { mgnt2Configuration 1 }
+
+
+mgnt2ConfigurationActionStatus OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 0 : activate
+ 1 : activated
+ 2 : failed"
+::= { mgnt2Configuration 2 }
+
+mgnt2ConfigurationActivationErrorCode OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 0 : noError
+ 1 : badValue
+ 2 : missingFile
+ 3 : emptyFile
+ 4 : wrong file"
+::= { mgnt2Configuration 3 }
+
+mgnt2ConfigurationActivationErrorString OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "String explaining Error code.
+ For example, in case of bad value(s), faulty parameter(s) name(s) are given"
+::= { mgnt2Configuration 4 }
+
+
+--
+-- SW Management
+
+mgnt2SoftwareDownload OBJECT IDENTIFIER ::= { mgnt2NMSMibObject 7 }
+
+mgnt2SoftwareDownloadActionStatus OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 0 : activate
+ 1 : downgrade
+ 2 : abort
+ 3 : activated
+ 4 : downgraded
+ 5 : failed"
+::= { mgnt2SoftwareDownload 2 }
+
+mgnt2SoftwareDownloadActivationErrorCode OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 0 : noError
+ 1 : badValue
+ 2 : missingFile
+ 3 : emptyFile
+ 4 : wrong file"
+::= { mgnt2SoftwareDownload 3 }
+
+mgnt2SoftwareDownloadActivationErrorString OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "String explaining Error code.
+ For example, in case of bad value(s), faulty parameter(s) name(s) are given"
+::= { mgnt2SoftwareDownload 4 }
+
+
+mgnt2SoftwareDownloadActivationSlotNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..32)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ ""
+::= { mgnt2SoftwareDownload 5 }
+
+mgnt2SoftwareDownloadActivationClearFile OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 0 : keepfile
+ 1 : clearfile
+ "
+::= { mgnt2SoftwareDownload 6 }
+
+
+-- Add for Linux / 5EK package
+
+mgnt2SoftwareDownloadActivationFilename OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "software file name including eventually file path"
+::= { mgnt2SoftwareDownload 7 }
+
+
+mgnt2SoftwareDownloadActivationAutoRestart OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 0 : norestart
+ 1 : autorestart
+ "
+::= { mgnt2SoftwareDownload 8 }
+
+mgnt2SoftwareDownloadActivationFileType OBJECT-TYPE
+ SYNTAX Mgnt2DownloadFileType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "File type to download/upload :
+ - 0 : pmPackage
+ - 1 : mgntPackage
+ - 2 : configurationFile
+ - 3 : logFile
+ - 4 : perfFile"
+::= { mgnt2SoftwareDownload 9 }
+
+
+
+-- End Add for Linux / 5EK package
+
+--
+-- Local Access Control
+
+-- mgnt2LacTable
+
+mgnt2LacTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mgnt2LacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The MGNT2 Local Access control table.
+ This table is used to give access to the Craft Terminals or/and NMS."
+::= {mgnt2NMSMibObject 8 }
+
+mgnt2LacEntry OBJECT-TYPE
+ SYNTAX Mgnt2LacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry is automatically created by Agent at start-up time."
+ INDEX { mgnt2LacIndex }
+::= { mgnt2LacTable 1 }
+
+
+Mgnt2LacEntry ::= SEQUENCE {
+ mgnt2LacIndex Integer32,
+ mgnt2LacState Mgnt2LacState,
+ mgnt2LacNoResponseTimeOutPeriod Integer32
+ }
+
+
+mgnt2LacIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the index for the Local Access Control table."
+::= { mgnt2LacEntry 1 }
+
+mgnt2LacState OBJECT-TYPE
+ SYNTAX Mgnt2LacState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "See textual convention"
+::= { mgnt2LacEntry 2 }
+
+mgnt2LacNoResponseTimeOutPeriod OBJECT-TYPE
+ SYNTAX Integer32 (0..3600)
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is the No Response TimeOut Period attribute for the
+ Local Access Control."
+::= { mgnt2LacEntry 3 }
+
+
+
+-- NM Registration table
+-- See MGNT2-MIB table mgnt2GigmManagerIpAddressTable
+
+--
+-- NM Polled Info
+
+mgnt2PolledInfo OBJECT IDENTIFIER ::= { mgnt2NMSMibObject 10 }
+
+mgnt2PolledInfoLastAlarmNotificationId OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object contains the notification identifier of the last alarm
+ stored inside AlarmLog."
+::= { mgnt2PolledInfo 1 }
+
+mgnt2PolledInfoLastEventNotificationId OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object contains the notification identifier of the last Event
+ stored inside EventLog."
+::= { mgnt2PolledInfo 2 }
+
+
+mgnt2PolledInfoConfigurationChecksum OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Entry used to identify uniquely configuration file content.
+ (Used to check alignement between NE configuration and configuration known by NM)"
+::= { mgnt2PolledInfo 3 }
+
+--
+-- Notification/Traps
+
+-- mgnt2TrapNMSAlarm
+
+mgnt2TrapNMSAlarm NOTIFICATION-TYPE
+ OBJECTS {
+ mgnt2AlmLogNotificationId,
+ mgnt2AlmLogObjectClassIdentifier,
+ -- mgnt2AlmLogObjectInstanceIdentifier,
+ mgnt2AlmLogSourcePm,
+ mgnt2AlmLogBoardNumber,
+ mgnt2AlmLogSourcePortType,
+ mgnt2AlmLogSourcePortNumber,
+ mgnt2AlmLogProbableCause,
+ mgnt2AlmLogSeverity,
+ mgnt2AlmLogSpecificProblem,
+ mgnt2AlmLogAdditionalText,
+ mgnt2AlmLogAlarmType,
+ mgnt2AlmLogTime,
+
+--Rajout binding Node Controller 1 avril 2015
+
+ mgnt2AlmLogNodeControllerIpAddress,
+ mgnt2AlmLogChassisId
+
+--Fin
+ }
+ STATUS current
+
+ --&FILTNAME "critical"
+ --&ACTIONS { log, critical }
+ --&MATCH { mgnt2AlmLogSeverity "critical", mgnt2AlmLogSourcePm "$3", mgnt2AlmLogBoardNumber "$4", mgnt2AlmLogSourcePortType "$5", mgnt2AlmLogSpecificProblem "$9"}
+ --&MESG "Critical Alarms ($9) detected on $5 on $3 (Slot $4) ($A)"
+
+ --&FILTNAME "major"
+ --&ACTIONS { log, major }
+ --&MATCH { mgnt2AlmLogSeverity "major", mgnt2AlmLogSourcePm "$3", mgnt2AlmLogBoardNumber "$4", mgnt2AlmLogSourcePortType "$5", mgnt2AlmLogSpecificProblem "$9"}
+ --&MESG "Major Alarms ($9) detected on $5 on $3 (Slot $4) ($A)"
+
+ --&FILTNAME "minor"
+ --&ACTIONS { log, minor }
+ --&MATCH { mgnt2AlmLogSeverity "minor", mgnt2AlmLogSourcePm "$3", mgnt2AlmLogBoardNumber "$4", mgnt2AlmLogSourcePortType "$5", mgnt2AlmLogSpecificProblem "$9"}
+ --&MESG "Minor Alarms ($9) detected on $5 on $3 (Slot $4) ($A)"
+
+ --&FILTNAME "warning"
+ --&ACTIONS { log, warning }
+ --&MATCH { mgnt2AlmLogSeverity "warning", mgnt2AlmLogSourcePm "$3", mgnt2AlmLogBoardNumber "$4", mgnt2AlmLogSourcePortType "$5", mgnt2AlmLogSpecificProblem "$9"}
+ --&MESG "Warning ($9) detected on $5 on $3 (Slot $4) ($A)"
+
+ --&FILTNAME "indeterminate"
+ --&ACTIONS { log, info }
+ --&MATCH { mgnt2AlmLogSeverity "indeterminate", mgnt2AlmLogSourcePm "$3", mgnt2AlmLogBoardNumber "$4", mgnt2AlmLogSourcePortType "$5", mgnt2AlmLogSpecificProblem "$9"}
+ --&MESG "Indeterminate Alarms ($9) detected on $5 on $3 (Slot $4) ($A)"
+
+ --&FILTNAME "clear"
+ --&ACTIONS { log, normal }
+ --&CLEARS { "critical", "major", "minor", "warning", "indeterminate" }
+ --&MATCH { mgnt2AlmLogSeverity "cleared", mgnt2AlmLogSourcePm "$3", mgnt2AlmLogBoardNumber "$4", mgnt2AlmLogSourcePortType "$5", mgnt2AlmLogSpecificProblem "$9"}
+ --&MESG "Alarms ($9) cleared on $5 on $3 (Slot $4) ($A)"
+
+
+ DESCRIPTION
+ "This notification reports Alarm event."
+::= { mgnt2NMSMibObject 11 }
+
+
+
+-- mgnt2TrapNMSEvent
+
+mgnt2TrapNMSEvent NOTIFICATION-TYPE
+ OBJECTS {
+ mgnt2EventLogNotificationId,
+ mgnt2EventLogObjectClassIdentifier,
+ -- mgnt2EventLogObjectInstanceIdentifier,
+ mgnt2EventLogSourcePm,
+ mgnt2EventLogBoardNumber,
+ mgnt2EventLogSourcePortType,
+ mgnt2EventLogSourcePortNumber,
+ mgnt2EventLogEventType,
+ mgnt2EventLogSourceType,
+ mgnt2EventLogReason,
+ mgnt2EventLogAdditionalText,
+ mgnt2EventLogTime,
+
+--Rajout binding Node Controller 1 avril 2015
+
+ mgnt2EventLogNodeControllerIpAddress,
+ mgnt2EventLogChassisId
+
+--Fin
+ }
+ STATUS current
+
+
+ --&FILTNAME "config"
+ --&ACTIONS { log, info }
+ --&MATCH {mgnt2EventLogSourceType "config"}
+ --&MESG "Configuration ($9) set to $10 on $5 on $3 (Slot $4) ($A)"
+
+ --&FILTNAME "event"
+ --&ACTIONS { log, info }
+ --&MATCH {mgnt2EventLogSourceType "event"}
+ --&MESG "$9 ($10) on $5 on $3 (Slot $4) ($A)"
+
+ --&FILTNAME "control"
+ --&ACTIONS { log, info }
+ --&MATCH {mgnt2EventLogSourceType "control"}
+ --&MESG "Maintenance ($9) set to $10 on $5 on $3 (Slot $4) ($A)"
+
+
+
+ DESCRIPTION
+ "This notification reports an Event."
+::= { mgnt2NMSMibObject 12 }
+
+
+--
+-- MODULE-COMPLIANCE To be completed
+
+mgnt2SupportMc MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "This module compliance describes a set of objects required for
+ MGNT2-NMS SNMP Agent implementation."
+
+ MODULE -- mgnt2NMS
+
+ MANDATORY-GROUPS { mgnt2ActiveAlmGroup,
+ mgnt2AlmLogGroup,
+ mgnt2EventLogGroup
+ }
+
+ ::= { mgnt2SupportMCCompl 1 }
+
+
+mgnt2ActiveAlmGroup OBJECT-GROUP
+ OBJECTS { mgnt2ActiveAlmProbableCause,
+ mgnt2ActiveAlmObjectClassIdentifier,
+ mgnt2ActiveAlmSourcePm,
+ mgnt2ActiveAlmBoardNumber,
+ mgnt2ActiveAlmSourcePortType,
+ mgnt2ActiveAlmSourcePortNumber,
+ mgnt2ActiveAlmSeverity,
+ mgnt2ActiveAlmType,
+ mgnt2ActiveAlmTime
+ }
+ STATUS current
+ DESCRIPTION
+ "This group describes the mandatory objects needed for the
+ Active Alarm management configuration."
+::= { mgnt2SupportMCCompl 2 }
+
+
+mgnt2AlmLogGroup OBJECT-GROUP
+ OBJECTS { mgnt2AlmLogProbableCause,
+ mgnt2AlmLogObjectClassIdentifier,
+ mgnt2AlmLogSourcePm,
+ mgnt2AlmLogBoardNumber,
+ mgnt2AlmLogSourcePortType,
+ mgnt2AlmLogSourcePortNumber,
+ mgnt2AlmLogSeverity,
+ mgnt2AlmLogAlarmType,
+ mgnt2AlmLogTime
+ }
+ STATUS current
+ DESCRIPTION
+ "This group describes the mandatory objects needed for the
+ Alarm log management configuration."
+::= { mgnt2SupportMCCompl 3 }
+
+
+mgnt2EventLogGroup OBJECT-GROUP
+ OBJECTS { mgnt2EventLogObjectClassIdentifier,
+ mgnt2EventLogSourcePm,
+ mgnt2EventLogBoardNumber,
+ mgnt2EventLogSourcePortType,
+ mgnt2EventLogSourcePortNumber,
+ mgnt2EventLogEventType,
+ mgnt2EventLogSourceType,
+ mgnt2EventLogTime
+ }
+ STATUS current
+ DESCRIPTION
+ "This group describes the mandatory objects needed for the
+ Event log management configuration."
+::= { mgnt2SupportMCCompl 4 }
+
+
+END
diff --git a/MIBS/ekinops/EKINOPS-MIB b/MIBS/ekinops/EKINOPS-MIB
new file mode 100644
index 0000000..54bc259
--- /dev/null
+++ b/MIBS/ekinops/EKINOPS-MIB
@@ -0,0 +1,167 @@
+-- *****************************************************************
+-- EKINOPS.TXT: MIB
+--
+--MIB Part Number:3MI02000AHAA
+--MIB Version:01
+--
+-- Copyright (c) 2006 by Ekinops
+-- All rights reserved.
+--
+-- *****************************************************************
+
+EKINOPS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ enterprises
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION
+ FROM SNMPv2-TC;
+
+ekinops MODULE-IDENTITY
+ LAST-UPDATED "200903160000Z"
+ ORGANIZATION "Ekinops"
+ CONTACT-INFO
+ "Ekinops
+
+ 11, rue Louis de Broglie
+ F-22300 Lannion / FRANCE
+
+ Tel : +33 (0)2 96 05 00 30
+ Fax : +33 (0)2 96 48 62 39
+
+ E-mail: support@ekinops.fr"
+ DESCRIPTION
+ "Initial version of this MIB module."
+ REVISION "200408180000Z"
+ DESCRIPTION
+ "Initial Version."
+ REVISION "200504040000Z"
+ DESCRIPTION
+ "Add the EkiMode type"
+ REVISION "200506080000Z"
+ DESCRIPTION
+ "Add the EkiSynchroMode type"
+ REVISION "200601190000Z"
+ DESCRIPTION
+ "Add the EkiLineProtocol type"
+ REVISION "200610260000Z"
+ DESCRIPTION
+ "Add the EkiStmProtocol type"
+ REVISION "200705240000Z"
+ DESCRIPTION
+ "Only one textual convention for all protocols"
+ REVISION "200903160000Z"
+ DESCRIPTION
+ "Clear Channel Protocol insertion"
+ ::= { enterprises 20044 }
+
+
+--- #####################################################
+--- SYMBOLIC NAMES DEFINITION
+--- #####################################################
+
+EkiState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "states for flags"
+ SYNTAX INTEGER {
+ disabled(1),
+ enabled(2)
+ }
+
+EkiOnOff ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "states for flags"
+ SYNTAX INTEGER {
+ off(1),
+ on(2)
+ }
+
+EkiProtocol ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Differents protocols on the SFP or XFP"
+ SYNTAX INTEGER {
+ protGBE(1),
+ prot1GFC(2),
+ prot2GFC(3),
+ protOC48(4),
+ protclearchannel(6),
+ prot10GBE(8),
+ protOC192(9),
+ protStm1(10),
+ protStm4(11),
+ prot2GBE(12),
+ prot4GFC(13),
+ protEscon(14),
+ protFastEth(15)
+ }
+
+EkiMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "mode for flags"
+ SYNTAX INTEGER {
+ auto(1),
+ manual(2)
+ }
+
+EkiSynchroMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Synchronization sources description"
+ SYNTAX INTEGER {
+ internal(1),
+ external(2)
+ }
+
+EkiApiState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Api errors descriptions"
+ SYNTAX INTEGER {
+ moduleNotResponding(128),
+ messageFormatError(129),
+ cmdExecutionError(130),
+ unknownArticleError(132),
+ unknownMessageError(133)
+ }
+
+EkiMeasureType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Measure type identifier"
+ SYNTAX INTEGER (0..15)
+
+
+EkiLoadGWSW ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Types of article files"
+ SYNTAX INTEGER {
+ gW(1),
+ sW(2)
+ }
+
+EkiLoadState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Current state of the article file"
+ SYNTAX INTEGER {
+ idle(1),
+ downloading(2)
+ }
+
+EkiLoadPermutMethod ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Permutation method for the current article"
+ SYNTAX INTEGER {
+ manual(0),
+ autoImmediate(1),
+ autoScheduled(2)
+ }
+
+EkiLoadPermutMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Permutation mode for the current article"
+ SYNTAX INTEGER {
+ coldReset(0),
+ warmReset(1)
+ }
+
+
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 09:55:23 +0000