diff options
Diffstat (limited to 'MIBS/eltexmes21xx/RADLAN-DEVICEPARAMS-MIB')
| -rw-r--r-- | MIBS/eltexmes21xx/RADLAN-DEVICEPARAMS-MIB | 777 |
1 files changed, 777 insertions, 0 deletions
diff --git a/MIBS/eltexmes21xx/RADLAN-DEVICEPARAMS-MIB b/MIBS/eltexmes21xx/RADLAN-DEVICEPARAMS-MIB new file mode 100644 index 0000000..5bd8009 --- /dev/null +++ b/MIBS/eltexmes21xx/RADLAN-DEVICEPARAMS-MIB @@ -0,0 +1,777 @@ +RADLAN-DEVICEPARAMS-MIB DEFINITIONS ::= BEGIN
+
+-- Title: RADLAN ROS
+-- Private DEVICE PARAMETERS MIB
+-- Version: 7.46
+-- Date: 15-Jan-2007
+
+IMPORTS
+ rnd FROM RADLAN-MIB
+ OBJECT-TYPE, MODULE-IDENTITY, IpAddress FROM SNMPv2-SMI
+ TruthValue, DisplayString, PhysAddress FROM SNMPv2-TC;
+
+rndDeviceParams MODULE-IDENTITY
+ LAST-UPDATED "200701020000Z"
+ ORGANIZATION "Radlan - a MARVELL company.
+ Marvell Semiconductor, Inc."
+ CONTACT-INFO
+ "www.marvell.com"
+ DESCRIPTION
+ "This private MIB module defines general Parameters private MIBs."
+ REVISION "200701020000Z"
+ DESCRIPTION
+ "Initial revision."
+ ::= { rnd 2 }
+
+-- rndDeviceParams group contains a number of general variables
+
+rndBridgeType OBJECT-TYPE
+ SYNTAX INTEGER {
+ reb(1),
+ ceb(2),
+ ceblb(3),
+ xeb(4),
+ xeb1(5),
+ rebsx(6),
+ rtb(7),
+ ltb(8),
+ tre(9),
+ rtre(10), -- remote TRE
+ xtb(11),
+ ete(12),
+ rete(13), -- remote ETE
+ ielb(30),
+ leb(31),
+ openGate12(32),
+ openGate4(33),
+ ran(34),
+ itlb(35),
+ gatelinx(36),
+ openGate2(37),
+ ogRanTR(38),
+ rdapter(39),
+ ogVan(40),
+ wanGate(41),
+ ogRubE(42),
+ ogRubT(43),
+ wanGateI(44),
+ vGate4(45),
+ lre(46),
+ mrt(47),
+ vGate2(48)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identification of the RND bridge type."
+ ::= { rndDeviceParams 1 }
+
+
+rndInactiveArpTimeOut OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable defines the maximum time period that can pass
+ between ARP requests concerning an entry in the ARP table.
+ After this time period, the entry is deleted from the table."
+ ::= { rndDeviceParams 2 }
+
+-- The following two variables define the format of RND specific
+-- error messages issued by the RND devices
+
+rndBridgeAlarm OBJECT IDENTIFIER ::= { rndDeviceParams 3 }
+
+rndErrorDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of the enterprise-specific trap sent
+ to the Network Management Station by the RND managed device."
+ ::= { rndBridgeAlarm 1 }
+
+rndErrorSeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ info(0),
+ warning(1),
+ error(2),
+ fatal-error(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The severity type of the enterprise-specific trap sent to the
+ Network Management Station by the RND managed device."
+ ::= { rndBridgeAlarm 2 }
+
+rndBrgVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The bridge version."
+ ::= { rndDeviceParams 4 }
+
+rndBrgFeatures OBJECT-TYPE
+ SYNTAX OCTET STRING -- SIZE 20
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A bit mask that defines the features supported by a particular configuration
+ of this network element:
+ __________________________________________
+ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 |
+ |87654321| | 87654321|
+ |________|_______________________________|
+
+ Byte1 :
+ bit1: TX Block mask
+ bit2: Source Routing Encapulation
+ bit3: SNA/SDLC
+ bit4: Frame Relay
+ bit5: SNMP
+ bit6: LAN Manager
+ bit7: High Performance
+ bit8: Translation
+ Byte2 :
+ bit1: DEC Router
+ bit2: IPX Router
+ bit3: IP Router
+ Byte3 :
+ bit1: Dial Up Backup
+ bit2: COD
+ bit3: FACS
+ bit4: Load Balance
+ bit5: Remote Configuration
+ bit6: RIP 2
+ bit7: OSPF
+ bit8: IPX RIP/SAP Filter
+ Byte4 :
+ bit1: BootP Server
+ bit2: BootP Client
+ bit3: Compression
+ bit4: V25.bis
+ bit5: ISDN
+ bit6: CODv2
+ bit7: NSPF
+ bit8: UDP Relay
+
+ Byte5
+ bit1:VirtualLAN
+ bit2:Static IP Multicast
+ bit3:IP Redundancy
+ bit4:CCM2
+ bit5:ISDN Bonding
+ bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0
+ bit7:IP/IPX Forwarding -- for the WANgate ver 4.0
+ bit8:Improved COD
+
+ Byte6
+ bit1: Server Disptacher
+ bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0
+ bit3: PPP
+ bit4: IP Rip Filter -- for Vgate3
+ bit5: Zero Hop Routing -- for Vgate3
+ bit6: ISDN Japan
+ bit7: PPP-Security
+
+ Byte7
+ bit1: With unmanaged Switch
+ bit2: 2 LANs
+ bit3: OSPF Ver 2.0
+ bit4: FACS Ver 2.0
+ bit5: Multiple WEB Farm
+ bit6: Backup Server
+ bit7: Check Connectivity
+ bit8: WSD multiplexing
+
+Byte8
+ bit1: MRT3
+ bit2: WSD Redundancy
+ bit3: DHCP Server
+ bit4: WSD Connection Limit
+ bit5: WSD Distributed System
+ bit6: WSD Load Report
+ bit7: WSD super farm
+ bit8: RadWiz leased line
+
+Byte9
+ bit1: PPP IP address negotiaton
+ bit2: DNS
+ bit3: Nat
+ bit4: WSD Static proximity
+ bit5: WSD Dynamic proximity
+ bit6: WSD Proxy
+ bit7: WSD Proximity client
+ bit8: MAC Load balancing
+
+Byte10
+ bit1: Unnum Inf
+ bit2: Power Supply redundancy
+ bit3: MRT PPP Compression
+ bit4: ZHR Apolo
+ bit5: Copy port
+ bit6: UDP Relay 2.0
+ bit7: NVRAM
+ bit8: URL table
+
+Byte11
+ bit1: URL super farm
+ bit2: NAT on LAN
+ bit3: Remote Con
+ bit4: AP5000
+ bit5: Session tracking
+ bit6: Mirroring
+ bit7: Alias IP
+ bit8: CSD Nat
+
+Byte12
+ bit1: content check
+ bit2: mlb virtual ip
+ bit3: reserved RadLan
+ bit4: csd nat exception
+ bit5: statistics monitor
+ bit6: reserved-for-radware "
+
+ ::= { rndDeviceParams 5 }
+
+rndBrgLicense OBJECT-TYPE
+ SYNTAX OCTET STRING -- SIZE 20
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter is used for entering a s/w license number for a device.
+ A separate license number is supplied for each device."
+ ::= { rndDeviceParams 6 }
+
+-- IP Host Parameters
+
+--All the new parameters under this section will be added to the
+-- rndMng group, as rndIpHost sub-group.
+--
+rndIpHost OBJECT IDENTIFIER ::= { rndDeviceParams 7 }
+--
+--ICMP Transmission Enable\Disable
+--The new variable will be
+
+-- Obsolete
+-- rndICMPTransmitionEnable OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- enable(1),
+-- disable(2)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "This variable controlls the ability to transmit ICMP frames"
+-- ::= { rndIpHost 1 }
+
+rndCommunityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RndCommunityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The community table of the agent"
+ ::= { rndIpHost 2 }
+
+rndCommunityEntry OBJECT-TYPE
+ SYNTAX RndCommunityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " The row definition for this table."
+ INDEX { rndCommunityMngStationAddr,
+ IMPLIED rndCommunityString }
+ ::= { rndCommunityTable 1 }
+
+RndCommunityEntry ::= SEQUENCE {
+ rndCommunityMngStationAddr IpAddress,
+ rndCommunityString DisplayString,
+ rndCommunityAccess INTEGER,
+ rndCommunityTrapsEnable INTEGER,
+ rndCommunityStatus INTEGER,
+ rndCommunityPortSecurity INTEGER,
+ rndCommunityOwner DisplayString,
+ rndCommunityTrapDestPort INTEGER
+}
+
+
+rndCommunityMngStationAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The management station that will be allowed to
+ communicate with the agent IP address"
+ ::= { rndCommunityEntry 1 }
+
+rndCommunityString OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..20))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The community string with which the management
+ station will communicate with the agent"
+ ::= { rndCommunityEntry 2 }
+
+rndCommunityAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ readOnly(1),
+ readWrite(2),
+ super(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The allowed access to this management station"
+ ::= { rndCommunityEntry 3}
+
+rndCommunityTrapsEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ snmpV1(1),
+ snmpV2(2),
+ snmpV3(3),
+ trapsDisable(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Should the agent send traps to the management station,
+ and what version is required"
+ ::= { rndCommunityEntry 4 }
+
+rndCommunityStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ invalid(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this entry. If the status is invalid the
+ community entry will be deleted"
+ ::= { rndCommunityEntry 5 }
+
+rndCommunityPortSecurity OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "If enabled the device will only receive SNMP messages from the port,
+ through which this NMS is reachable from the device."
+ DEFVAL { disabled }
+ ::= { rndCommunityEntry 6 }
+
+rndCommunityOwner OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The owner of this community"
+ ::= { rndCommunityEntry 7 }
+
+rndCommunityTrapDestPort OBJECT-TYPE
+ SYNTAX INTEGER(0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The transport protocol (usually UDP) port to which traps to the
+ management station represebted by this entry will be sent. The default
+ is the well-known IANA assigned port number for SNMP traps.
+ This object is relevant only if rndCommunityTrapsEnable has a value
+ different from trapsDisable."
+ DEFVAL { 162 }
+ ::= { rndCommunityEntry 8 }
+
+rlMridTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlMridEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The MRID related configurations table of the agent"
+ ::= { rndIpHost 3 }
+
+rlMridEntry OBJECT-TYPE
+ SYNTAX RlMridEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " The row definition for this table."
+ INDEX { rndCommunityMngStationAddr,
+ IMPLIED rndCommunityString }
+ ::= { rlMridTable 1 }
+
+RlMridEntry ::= SEQUENCE {
+ rlMridConnection INTEGER,
+ rlManagedMrid INTEGER
+}
+
+rlMridConnection OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The router instance connecting the NMS who accessed the agent
+ through the community table entry corresponding to the keys of this entry."
+ ::= { rlMridEntry 1 }
+
+rlManagedMrid OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The router instance currently managed by the NMS who accessed the agent
+ through the community table entry corresponding to the keys of this entry "
+ ::= { rlMridEntry 2 }
+
+rndManagedTime OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(6))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The time will be sent in the format hhmmss"
+ ::= { rndDeviceParams 8 }
+
+rndManagedDate OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(6))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The date will be sent in the format ddmmyy"
+ ::= { rndDeviceParams 9 }
+
+rndBaseBootVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines the boot version of the product."
+ ::= { rndDeviceParams 10 }
+
+rndIpHostManagement OBJECT IDENTIFIER ::= { rndIpHost 4 }
+
+rndIpHostManagementSupported OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ifindex manage supported."
+ ::= { rndIpHostManagement 1 }
+
+rndIpHostManagementIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "if supported manage , indicate ifindex, if 0 thaen disable"
+ ::= { rndIpHostManagement 2 }
+
+genGroup OBJECT IDENTIFIER ::= { rndDeviceParams 11 }
+genGroupHWVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines the HW version of the product."
+ ::= { genGroup 1 }
+
+genGroupConfigurationSymbol OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines the Configuration Symbol attached to any hardware module
+ manufactured by LANNET. One single character A..Z defines the CS
+ version."
+ ::= { genGroup 2 }
+
+genGroupHWStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(1),
+ hardwareProblems(2),
+ notSupported(255)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This attribute describes the status of the group hardware as detected
+ by the sensors software."
+ ::= { genGroup 3 }
+
+rndBasePhysicalAddress OBJECT-TYPE
+ SYNTAX PhysAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Base physical (MAC) address of the device."
+ ::= { rndDeviceParams 12 }
+
+RlImageIdType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "SW images enumeration"
+ SYNTAX INTEGER { image1(1), image2(2) }
+
+rndSoftwareFile OBJECT IDENTIFIER ::= { rndDeviceParams 13 }
+
+rndActiveSoftwareFileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RndActiveSoftwareFileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " The (conceptual) table listing the active software file of the
+ requested unit."
+ ::= {rndSoftwareFile 1 }
+
+rndActiveSoftwareFileEntry OBJECT-TYPE
+ SYNTAX RndActiveSoftwareFileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " An entry (conceptual row) in the rndActiveSoftwareFileTable."
+ INDEX {rndUnitNumber }
+ ::= {rndActiveSoftwareFileTable 1 }
+
+RndActiveSoftwareFileEntry ::= SEQUENCE {
+ rndUnitNumber INTEGER,
+ rndActiveSoftwareFile RlImageIdType,
+ rndActiveSoftwareFileAfterReset INTEGER
+}
+
+rndUnitNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The unit number (for stackable devices) or 1 for 'stand alone' device."
+ ::= {rndActiveSoftwareFileEntry 1 }
+
+rndActiveSoftwareFile OBJECT-TYPE
+ SYNTAX RlImageIdType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current active software file, image1 or image2."
+ ::= {rndActiveSoftwareFileEntry 2 }
+
+rndActiveSoftwareFileAfterReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ image1(1),
+ image2(2),
+ invalidImage(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the software file that will be active after reset (image1 or image2).
+ If an error occurred in the download process, resulting in the corruption
+ of the single software file, The value 'invalidImage' will be returned.
+ This value can not be set by the user."
+ ::= {rndActiveSoftwareFileEntry 3 }
+
+rlResetStatus
+ OBJECT-TYPE
+ SYNTAX BITS {
+ ok(0),
+ no-stack-integrity(1),
+ downgrade(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A bit mask that specifies system status before reset action is preformed.
+ Reset is prohibited in stackable products if the images selected after
+ reboot are not of the same release version in ALL stack units.
+ Downgrade status specifies that there are some actions to be preformed
+ on the CDB file before reset is preformed.
+ 0x0 - OK
+ 0x1 - noStackIntegrity
+ 0x2 - downgrade"
+ ::= { rndSoftwareFile 2 }
+
+
+rndImageSize OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Max number of sectors currently allocated for image(s)."
+ ::= { rndDeviceParams 14 }
+
+rndBackupConfigurationEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the device supports backup-config parameters in lcli commands."
+ ::= { rndDeviceParams 15 }
+
+rndImageInfo OBJECT IDENTIFIER ::= { rndDeviceParams 16 }
+
+rndImageInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RndImageInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " The table contains information about images."
+ ::= {rndImageInfo 1 }
+
+rndImageInfoEntry OBJECT-TYPE
+ SYNTAX RndImageInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " An entry in the rndImageInfoTable."
+ INDEX {rndStackUnitNumber }
+ ::= {rndImageInfoTable 1 }
+
+RndImageInfoEntry ::= SEQUENCE {
+ rndStackUnitNumber INTEGER,
+ rndImage1Name DisplayString,
+ rndImage2Name DisplayString,
+ rndImage1Version DisplayString,
+ rndImage2Version DisplayString,
+ rndImage1Date DisplayString,
+ rndImage2Date DisplayString,
+ rndImage1Time DisplayString,
+ rndImage2Time DisplayString
+}
+
+rndStackUnitNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The unit number (for stackable devices) or 1 for 'stand alone' device."
+ ::= {rndImageInfoEntry 1 }
+
+rndImage1Name OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the file name of image-1 in the system."
+ ::= {rndImageInfoEntry 2 }
+
+rndImage2Name OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' text"
+ ::= {rndImageInfoEntry 3 }
+
+
+rndImage1Version OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the version of image-1 in the system."
+ ::= {rndImageInfoEntry 4 }
+
+rndImage2Version OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' text"
+ ::= {rndImageInfoEntry 5 }
+
+rndImage1Date OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the compilation date of image-1 in the system."
+ ::= {rndImageInfoEntry 6 }
+
+rndImage2Date OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' text"
+ ::= {rndImageInfoEntry 7 }
+
+rndImage1Time OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the compilation time of image-1 in the system."
+ ::= {rndImageInfoEntry 8 }
+
+rndImage2Time OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' text"
+ ::= {rndImageInfoEntry 9 }
+
+rlComponentsInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlComponentsInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table contains information about components, their streams and baselines in the device images."
+ ::= {rndImageInfo 2}
+
+rlComponentsInfoEntry OBJECT-TYPE
+ SYNTAX RlComponentsInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the rlComponentsInfoTable."
+ INDEX {rlComponentsInfoStackUnitNumber, rlComponentsInfoImageId,
+ IMPLIED rlComponentsInfoComponent}
+ ::= {rlComponentsInfoTable 1 }
+
+RlComponentsInfoEntry ::= SEQUENCE {
+ rlComponentsInfoStackUnitNumber INTEGER,
+ rlComponentsInfoImageId RlImageIdType,
+ rlComponentsInfoComponent DisplayString,
+ rlComponentsInfoBaseline DisplayString
+}
+
+rlComponentsInfoStackUnitNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The unit number (for stackable devices) or 1 for 'stand alone' device."
+ ::= {rlComponentsInfoEntry 1}
+
+
+rlComponentsInfoImageId OBJECT-TYPE
+ SYNTAX RlImageIdType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the image id in the unit"
+::= {rlComponentsInfoEntry 2}
+
+rlComponentsInfoComponent OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (1..40))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the SW component name."
+ ::= {rlComponentsInfoEntry 3}
+
+rlComponentsInfoBaseline OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the version control baseline of the SW component name."
+ ::= {rlComponentsInfoEntry 5}
+
+
+END
+
|