diff options
Diffstat (limited to 'MIBS/eltexmes21xx/RADLAN-rndMng')
| -rw-r--r-- | MIBS/eltexmes21xx/RADLAN-rndMng | 483 |
1 files changed, 483 insertions, 0 deletions
diff --git a/MIBS/eltexmes21xx/RADLAN-rndMng b/MIBS/eltexmes21xx/RADLAN-rndMng new file mode 100644 index 0000000..7ec9c30 --- /dev/null +++ b/MIBS/eltexmes21xx/RADLAN-rndMng @@ -0,0 +1,483 @@ +RADLAN-rndMng DEFINITIONS ::= BEGIN
+
+-- Title: RADLAN Management Private Extension
+-- Version: 7.45
+-- Date: 19 Dec 2006
+-- 28-Feb-2005 Added rlCpuUtilEnable
+-- 28-Feb-2005 Added rlCpuUtilDuringLastSecond
+-- 28-Feb-2005 Added rlCpuUtilDuringLastMinute
+-- 28-Feb-2005 Added rlCpuUtilDuringLast5Minutes
+-- 13-Jun-2006 Added value {none} of rndAction
+-- 20-Jun-2006 Added rlRebootDelay
+-- 19-Dec-2006 Added resetToFactoryDefaults
+
+IMPORTS
+ rnd FROM RADLAN-MIB
+ Unsigned32,
+ MODULE-IDENTITY, OBJECT-TYPE, TimeTicks FROM SNMPv2-SMI
+ RowStatus, TruthValue, DisplayString,
+ TEXTUAL-CONVENTION FROM SNMPv2-TC
+ InetAddressType, InetAddress FROM INET-ADDRESS-MIB;
+
+
+rndMng MODULE-IDENTITY
+ LAST-UPDATED "200606200000Z"
+ ORGANIZATION "Radlan Computer Communications Ltd."
+ CONTACT-INFO
+ "radlan.com"
+ DESCRIPTION
+ "The private MIB module definition for RND general management MIB."
+ REVISION "200902240000Z"
+ DESCRIPTION
+ "Added rlRunningCDBequalToStartupCDB object."
+ REVISION "200710240000Z"
+ DESCRIPTION
+ "Added rlGroupManagement branch."
+ REVISION "200606200000Z"
+ DESCRIPTION
+ "Added rlRebootDelay object"
+ REVISION "200406010000Z"
+ DESCRIPTION
+ "Initial version of this MIB."
+ ::= { rnd 1 }
+
+
+rndSysId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identification of an RND device. The device type for each
+ integer clarifies the sysObjectID in MIB - II."
+ ::= { rndMng 1 }
+
+rndAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ reset(1),
+ sendNetworkTab(2),
+ deleteNetworkTab(3),
+ sendRoutingTab(4), -- Level II
+ deleteRoutingTab(5),
+ sendLanTab(6),
+ deleteLanTab(7),
+ deleteArpTab(8),
+ sendArpTab(9),
+ deleteRouteTab(10), -- Level III
+ sendRouteTab(11),
+ backupSPFRoutingTab(12),
+ backupIPRoutingTab(13),
+ backupNetworkTab(14),
+ backupLanTab(15),
+ backupArpTab(16),
+ backupIPXRipTab(17),
+ backupIPXSAPTab(18),
+ resetStartupCDB(19),
+ eraseStartupCDB(20),
+ deleteZeroHopRoutingAllocTab(21),
+ slipDisconnect(22),
+ deleteDynamicLanTab(23),
+ eraseRunningCDB(24),
+ copyStartupToRunning(25),
+ none(26),
+ resetToFactoryDefaults(27)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable enables the operator to perform one of the
+ specified actions on the tables maintained by the network device.
+ Send actions require support of proprietery File exchange
+ protocol."
+ ::= { rndMng 2 }
+
+rndFileName OBJECT-TYPE
+ SYNTAX OCTET STRING -- SIZE 256
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The name of the file used internally by RND for transferring
+ tables maintained by network devices, using a prorietary File
+ exchange protocol."
+ ::= { rndMng 3 }
+
+rlSnmpVersionSupported OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(1))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the snmp versions that are supported by
+ this device."
+ ::= { rndMng 4 }
+
+rlSnmpMibVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the snmp support version that is supported by
+ this device."
+ ::= { rndMng 5 }
+
+rlCpuUtilEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables measurement of the device CPU utilization.
+ In order to get real values for rlCpuUtilDuringLastSecond, rlCpuUtilDuringLastMinute
+ and rlCpuUtilDuringLast5Minutes, the value of this object must be true."
+ DEFVAL { true }
+ ::= { rndMng 6 }
+
+rlCpuUtilDuringLastSecond OBJECT-TYPE
+ SYNTAX INTEGER (0..101)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percentage of the device CPU utilization during last second.
+ The value 101 is a dummy value, indicating that the CPU utilization was
+ not measured (since measurement is disabled or was disabled during last second)."
+ ::= { rndMng 7 }
+
+rlCpuUtilDuringLastMinute OBJECT-TYPE
+ SYNTAX INTEGER (0..101)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percentage of the device CPU utilization during last minute.
+ The value 101 is a dummy value, indicating that the CPU utilization was
+ not measured (since measurement is disabled or was disabled during last minute)."
+ ::= { rndMng 8 }
+
+rlCpuUtilDuringLast5Minutes OBJECT-TYPE
+ SYNTAX INTEGER (0..101)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percentage of the device CPU utilization during the last 5 minutes.
+ The value 101 is a dummy value, indicating that the CPU utilization was
+ not measured (since measurement is disabled or was disabled during last 5 minutes)."
+ ::= { rndMng 9 }
+
+rlRebootDelay OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable will cause the device to reboot rlRebootDelay timeticks
+ from the moment this variable was set.
+ If not set, the variable will return a value of 4294967295.
+ If set to 4294967295, reboot action is cancelled.
+ The maximum delay is set by the host parameter: reboot_delay_max"
+ ::= { rndMng 10 }
+
+rlGroupManagement OBJECT IDENTIFIER ::= { rndMng 11 }
+
+rlGroupMngQuery OBJECT-TYPE
+ SYNTAX INTEGER {query(1), idle(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting value query will cause the device to query for UPNP devices on the network.
+ The device will always return value idle for GET."
+ ::= { rlGroupManagement 1 }
+
+rlGroupMngQueryPeriod OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets desired interval between queries for UPNP devices on the network.
+ Setting 0 will result in no such query.
+ Note that the actual query interval might be less than the set value
+ if another application running in the device requested a shorter interval.
+ Likewise setting 0 will not necessarily stop periodic queries if another
+ application is still interested in periodic polling."
+ DEFVAL { 0 }
+ ::= { rlGroupManagement 2 }
+
+rlGroupMngLastUpdate OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last time rlGroupMng MIB was updated."
+ ::= { rlGroupManagement 3 }
+
+
+rlGroupMngDevicesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlGroupMngDeviceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table showing the discovered devices."
+ ::= { rlGroupManagement 4 }
+
+rlGroupMngDeviceEntry OBJECT-TYPE
+
+ SYNTAX RlGroupMngDeviceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " The row definition for this table."
+ INDEX { rlGroupMngDeviceIdType, rlGroupMngDeviceId, rlGroupMngSubdevice }
+
+::= { rlGroupMngDevicesTable 1 }
+
+
+RlGroupMngDeviceEntry ::= SEQUENCE {
+ rlGroupMngDeviceIdType InetAddressType,
+ rlGroupMngDeviceId InetAddress,
+ rlGroupMngSubdevice INTEGER,
+ rlGroupMngDeviceDescription DisplayString,
+ rlGroupMngGroupMngEnabled TruthValue,
+ rlGroupMngGroupLLDPDeviceId DisplayString,
+ rlGroupMngDeviceVendor DisplayString,
+ rlGroupMngDeviceAdvertisedCachingTime INTEGER,
+ rlGroupMngDeviceLocationURL DisplayString,
+ rlGroupMngDeviceLastSeen TimeTicks
+}
+
+rlGroupMngDeviceIdType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IP address type of the discovered device "
+ ::= { rlGroupMngDeviceEntry 1 }
+
+rlGroupMngDeviceId OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IP address of the discovered device "
+ ::= { rlGroupMngDeviceEntry 2 }
+
+rlGroupMngSubdevice OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A subdevice within the rlGroupMngDeviceId. Only subdevices with greatest
+ specifity will be kept (specific UUID device is more specific than basic device which is in turn
+ more specific than root device. "
+ ::= { rlGroupMngDeviceEntry 3 }
+
+rlGroupMngDeviceDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The discovery protocol description of the device."
+ ::= { rlGroupMngDeviceEntry 4 }
+
+
+rlGroupMngGroupMngEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the device has Group Management enable."
+ ::= { rlGroupMngDeviceEntry 5 }
+
+rlGroupMngGroupLLDPDeviceId OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LLDP device id. If it is empty the device id is not known (either it is a non-MTS device or a non-LLDP supporting MTS device."
+ ::= { rlGroupMngDeviceEntry 6 }
+
+rlGroupMngDeviceVendor OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vendor of the device. If empty the vendor is not known."
+ ::= { rlGroupMngDeviceEntry 7 }
+
+rlGroupMngDeviceAdvertisedCachingTime OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The caching time advertised by the device. If no update for this
+ device has been received during this caching time the system will assume
+ that the device has left the network and will therefore remove its entry
+ from the table."
+ ::= { rlGroupMngDeviceEntry 8 }
+
+rlGroupMngDeviceLocationURL OBJECT-TYPE
+ SYNTAX DisplayString
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The URL inidicating the location of the XML presenting the details of the device."
+ ::= { rlGroupMngDeviceEntry 9 }
+
+rlGroupMngDeviceLastSeen OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the moment of last reception of an update for
+ this device. "
+ ::= { rlGroupMngDeviceEntry 10 }
+
+rlRunningCDBequalToStartupCDB OBJECT-TYPE
+
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether there are changes in running CDB that were not saved in flash."
+ ::= { rndMng 13 }
+
+rlClearMib OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Clear MIB value for scalars or tables:
+ Delete all entries for tables with dynamic entries.
+ Set table entries default values for table with static entries.
+ Set scalar default value."
+ ::= { rndMng 14 }
+
+rlCpuTasksUtilEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables measurement of the device CPU tasks utilization.
+ In order to get real values for rlCpuTasksUtilDuringLastSecond, rlCpuTasksUtilDuringLastMinute
+ and rlCpuTasksUtilDuringLast5Minutes, the value of this object must be true."
+ DEFVAL { true }
+ ::= { rndMng 15 }
+
+rlCpuTasksUtilValues OBJECT IDENTIFIER
+ ::= { rndMng 16 }
+
+rlCpuTasksUtilValuesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlCpuTasksUtilValuesEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A list of measurement of the device CPU tasks utilization."
+ ::= { rlCpuTasksUtilValues 1 }
+
+rlCpuTasksUtilValuesEntry OBJECT-TYPE
+ SYNTAX RlCpuTasksUtilValuesEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry containing measurement of the device CPU tasks utilization."
+ INDEX { rlCpuTasksUtilValuesIndex }
+ ::= { rlCpuTasksUtilValuesTable 1 }
+
+RlCpuTasksUtilValuesEntry ::= SEQUENCE {
+ rlCpuTasksUtilValuesIndex INTEGER,
+ rlCpuTasksUtilValuesName DisplayString,
+ rlCpuTasksUtilDuringLast5Seconds INTEGER,
+ rlCpuTasksUtilDuringLastMinute INTEGER,
+ rlCpuTasksUtilDuringLast5Minutes INTEGER
+}
+
+rlCpuTasksUtilValuesIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Index of the device CPU task."
+ ::= { rlCpuTasksUtilValuesEntry 1 }
+
+rlCpuTasksUtilValuesName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Name of the device CPU task."
+ ::= { rlCpuTasksUtilValuesEntry 2 }
+
+rlCpuTasksUtilDuringLast5Seconds OBJECT-TYPE
+ SYNTAX INTEGER (0..101)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percentage of the device CPU task utilization during last 5 seconds.
+ The value 101 is a dummy value, indicating that the CPU tasks utilization was
+ not measured (since measurement is disabled or was disabled during last second)."
+ ::= { rlCpuTasksUtilValuesEntry 3 }
+
+rlCpuTasksUtilDuringLastMinute OBJECT-TYPE
+ SYNTAX INTEGER (0..101)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percentage of the device CPU task utilization during last minute.
+ The value 101 is a dummy value, indicating that the CPU tasks utilization was
+ not measured (since measurement is disabled or was disabled during last minute)."
+ ::= { rlCpuTasksUtilValuesEntry 4 }
+
+rlCpuTasksUtilDuringLast5Minutes OBJECT-TYPE
+ SYNTAX INTEGER (0..101)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percentage of the device CPU task utilization during the last 5 minutes.
+ The value 101 is a dummy value, indicating that the CPU tasks utilization was
+ not measured (since measurement is disabled or was disabled during last 5 minutes)."
+ ::= { rlCpuTasksUtilValuesEntry 5 }
+
+
+-------------------------------------------------------------------------------
+-- Scheduled Reload
+-------------------------------------------------------------------------------
+rlScheduledReload OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..10))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used for requesting a delayed reload of the device in a
+ specific desired time, should be configured in one of the following formats:
+ 'athhmmddMM' , 'inhhhmmm' or '', setting this value to an empty string
+ will result in request for cancellation of a (previously) committed system reload.
+ to complete the request, the 'rlScheduledReloadCommit' must also be set to either
+ TRUE (apply) or FALSE (discard) for completion of the transaction.
+ failing from doing so will result in an indefinite lock of the API"
+ ::= { rndMng 17 }
+
+rlScheduledReloadPendingDate OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..24))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Displays the most recently requested scheduled-reload due date
+ in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7).
+ if there is no pending/scheduled reload request, string will be empty"
+ ::= { rndMng 18 }
+
+rlScheduledReloadApprovedDate OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..24))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Displays the most recently approved/committed scheduled-reload date
+ in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7).
+ if there is no committed scheduled-reload , string will be empty"
+ ::= { rndMng 19 }
+
+rlScheduledReloadCommit OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "commits the pending scheduled-reload request, and completes the transaction.
+ when this value is set to TRUE, the system is instructed to perform the
+ requested reload operation at the requested date/time
+ as was given in 'rlScheduledReload'.
+ setting this value to FALSE will discard the request."
+ ::= { rndMng 20 }
+
+END
+
|