diff options
Diffstat (limited to 'MIBS/enterasys/CTELS100-NG-MIB')
| -rw-r--r-- | MIBS/enterasys/CTELS100-NG-MIB | 846 |
1 files changed, 846 insertions, 0 deletions
diff --git a/MIBS/enterasys/CTELS100-NG-MIB b/MIBS/enterasys/CTELS100-NG-MIB new file mode 100644 index 0000000..8f4dfa9 --- /dev/null +++ b/MIBS/enterasys/CTELS100-NG-MIB @@ -0,0 +1,846 @@ +CTELS100-NG-MIB DEFINITIONS ::= BEGIN + + -- ctels100-ng-mib.txt + -- Revision: 01.03.00 + -- Part Number: + -- Date: December 15, 1999 + + -- Cabletron Systems, Inc. + -- 35 Industrial Way, P.O. Box 5005 + -- Rochester, NH 03867-0505 + -- (603) 332-9400 + -- support@ctron.com + + -- This module provides authoritative definitions for part of the + -- naming tree below: + -- + -- cabletron { enterprises 52 } + -- + -- This module will be extended, as required. + -- + -- Cabletron Systems reserves the right to make changes in + -- specification and other information contained in this document + -- without prior notice. The reader should consult Cabletron Systems + -- to determine whether any such changes have been made. + -- + -- In no event shall Cabletron Systems be liable for any incidental, + -- indirect, special, or consequential damages whatsoever (including + -- but not limited to lost profits) arising out of or related to this + -- document or the information contained in it, even if Cabletron + -- Systems has been advised of, known, or should have known, the + -- possibility of such damages. + -- + -- Cabletron grants vendors, end-users, and other interested parties + -- a non-exclusive license to use this Specification in connection + -- with the management of Cabletron products. + -- + -- Copyright (c)1999 Cabletron Systems + -- + -- This mib is part of the assigned enterprise MIB tree for Cabletron Systems. + -- This mib provides management information for the next generation of the + -- ELS100 product line (specifically: ELS100-24TX, ELS100-24TXM, and + -- ELS100-24TXG), part of the SmartSTACK product line. + + IMPORTS + Counter, mgmt, NetworkAddress, enterprises + FROM RFC1155-SMI + DisplayString + FROM RFC1213-MIB + OBJECT-TYPE + FROM RFC-1212; + -- TRAP-TYPE + -- FROM RFC-1215; + + -- All representations of MAC addresses in this MIB Module + -- use, as a textual convention (i.e. this convention does + -- not affect their encoding), the data type: + + -- DisplayString ::= OCTET STRING + + mib-2 OBJECT IDENTIFIER ::= { mgmt 1 } + + + cabletron OBJECT IDENTIFIER ::= { enterprises 52 } + els100 OBJECT IDENTIFIER ::= { cabletron 1011 } + + els100SystemConfig OBJECT IDENTIFIER ::= { els100 1 } +-- els100PortTable OBJECT IDENTIFIER ::= { els100 2 } + els100Switch OBJECT IDENTIFIER ::= { els100 3 } + + + -- System-level configuration information + + els100SysSerialno OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The serial number of the system." + ::= { els100SystemConfig 1 } + + els100SysTftpIPAddress OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the TFTP server from which a software + download is to be initiated. This variable must be set + before a TFTP download can be started with the + els100SysTftpStartDownload variable." + ::= { els100SystemConfig 2 } + + els100SysTftpFilename OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The name of the software upgrade file residing on the + TFTP server. Path information must be included in the file + name. This variable must be set before a TFTP download can + be started with the els100SysTftpStartDownload variable." + ::= { els100SystemConfig 3 } + + els100SysPowerupCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of times the system has powered up since + it was shipped from the factory." + ::= { els100SystemConfig 4 } + + els100SysBrcastCutoffRate OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Broadcast Cutoff Rate of the switch allowing for the + control of broadcast storms. The value of this variable sets + a per second rate. If the broadcast and unknown destination + address frames being forwarded through the system surpass this + rate, they are dropped. Valid values for this parameter are + in the range (100..500000)." + ::= { els100SystemConfig 5 } + + els100SysGatewayIPAddress OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the next hop router (gateway) to which + frames destined for an IP subnet different than what the + system resides are sent." + ::= { els100SystemConfig 6 } + + els100SysTftpStartDownload OBJECT-TYPE + SYNTAX INTEGER{ + download (1), + noDownload (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Start a TFTP download. A SET of this variable with the + value download (1) initiates a TFTP download to upgrade the + system software. The variables els100SysTftpIPAddress and + els100SysTftpFilename must be configured before a download + can begin. A GET of this variable will always return the + value noDownload (2)." + ::= { els100SystemConfig 7 } + + els100SysBootPDhcpEnable OBJECT-TYPE + SYNTAX INTEGER{ + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enable or disable the operation of the BootP and DHCP + protocols on the system. These protocols are used for + automatically configuring the system's IP address + information if a properly configured BootP and/or DHCP + server exists on the network." + ::= { els100SystemConfig 8 } + +-- els100SysRmonStatsHistEnable OBJECT-TYPE +-- SYNTAX INTEGER{ +-- disable (1), +-- enable (2) +-- } +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "Globally enable/disable the operation of the RMON +-- Statistics and History Groups on all ports simultaneously." +-- ::= { els100SystemConfig 9 } + + els100SysReset OBJECT-TYPE + SYNTAX INTEGER{ + noReset (1), + reset (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Initiate a software reset of the system." + ::= { els100SystemConfig 10 } + + els100SysSyslogServer OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the Syslog Server." + ::= { els100SystemConfig 11 } + + els100SysLowestSyslogSeverity OBJECT-TYPE + SYNTAX INTEGER{ + emergency (0), + alert (1), + critical (2), + error (3), + warning (4), + notice (5), + info (6), + debug (7) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Lowest Syslog Severity Level. All logs with + the same or higher severity will be delivered. + Note: higher severity has lower number." + ::= { els100SystemConfig 12 } + + els100SysComPortEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + enabled(2) -- default + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The administrative state of the Com Port." + ::= { els100SystemConfig 13 } + + + els100SysBoardID OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The system board ID." + ::= { els100SystemConfig 14 } + + -- The port table - indexed by port + + els100PortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els100PortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The port table." + ::= { els100 2 } + + els100PortEntry OBJECT-TYPE + SYNTAX Els100PortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the port table." + INDEX { els100Port } + ::= { els100PortTable 1 } + + Els100PortEntry ::= + SEQUENCE { + els100Port + INTEGER, + els100PortStatus + INTEGER, + els100PortDuplexStatus + INTEGER, + els100PortForwardedFrames + Counter, + els100PortRcvdLocalFrames + Counter, + els100PortName + DisplayString, + els100PortEnable + INTEGER, + els100PortSpeed + INTEGER, + els100PortAutonegEnable + INTEGER, + els100PortFlowControlEnable + INTEGER, + els100PortType + INTEGER + } + + els100Port OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of the port, from 1 to the number of ports on + the system." + ::= { els100PortEntry 1 } + + els100PortStatus OBJECT-TYPE + SYNTAX INTEGER{ + up (1), + down (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The connection (link) status of the port, either up + (linked) or down (not linked)." + ::= { els100PortEntry 2 } + + els100PortDuplexStatus OBJECT-TYPE + SYNTAX INTEGER{ + half (1), + full (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The duplex status of the port, either half duplex or + full duplex." + ::= { els100PortEntry 3 } + + els100PortForwardedFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames received on the port and forwarded + to another port on the system module for processing." + ::= { els100PortEntry 4 } + + els100PortRcvdLocalFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames received where the destination is + on the port." + ::= { els100PortEntry 5 } + + els100PortName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..60)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A descriptive string of up to 60 characters used by the + network administrator to name the port." + ::= { els100PortEntry 6 } + + els100PortEnable OBJECT-TYPE + SYNTAX INTEGER { + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The enable status of the port, either enable or disable." + ::= { els100PortEntry 7 } + + els100PortSpeed OBJECT-TYPE + SYNTAX INTEGER { + tenMbps (1), + oneHundredMbps(2), + oneThousandMbps(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The speed the port is operating at: 10Mbps, or + 100Mbps, or 1000Mbps." + ::= { els100PortEntry 8 } + + els100PortAutonegEnable OBJECT-TYPE + SYNTAX INTEGER { + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The auto-negotiation status of the port, either enable + or disable. When in the enable (2) state, the port will + automatically configure its duplex and speed operation." + ::= { els100PortEntry 9 } + + els100PortFlowControlEnable OBJECT-TYPE + SYNTAX INTEGER { + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The state of flow control operation of the port, either + enable or disable." + ::= { els100PortEntry 10 } + + els100PortType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + ieee10BaseT(2), + ieee100BaseTx(3), + ieee100BaseFx-MM(4), + ieee100BaseFx-SM(5), + ieee1000BaseCx(6), + ieee1000BaseLx(7), + ieee1000BaseSx(8), + ieee1000BaseT(9), + ieee1000BaseX(10) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Port physical interface type." + ::= { els100PortEntry 11 } + + + -- Switch-level information and configuration + + els100SwitchIPAddress OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the system." + ::= { els100Switch 1 } + + els100SwitchSubnetMask OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The subnet mask associated with the IP address of the system." + ::= { els100Switch 2 } + + els100ActiveAgingTime OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The aging time of entries in the MAC address forwarding table + of the system." + ::= { els100Switch 3 } + +-- els100PurgeAgingTime OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "The purge aging time of entries in the MAC address forwarding +-- table of the system." +-- ::= { els100Switch 4 } + + els100SwitchSTPStatus OBJECT-TYPE + SYNTAX INTEGER{ + on (1), + off (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Spanning Tree status of the system, enter on or off." + ::= { els100Switch 5 } + + els100SwitchManager OBJECT IDENTIFIER ::= { els100Switch 6 } + + els100SwitchTrapRcvr1 OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the first SNMP manager to which traps + from the system are directed." + ::= { els100SwitchManager 1 } + + els100SwitchTrapCommunity1 OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..60)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The community name of the first SNMP manager to which traps + from the system are directed." + ::= { els100SwitchManager 2 } + + els100SwitchTrapRcvr2 OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the second SNMP manager to which traps + from the system are directed." + ::= { els100SwitchManager 3 } + + els100SwitchTrapCommunity2 OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..60)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The community name of the second SNMP manager to which traps + from the system are directed." + ::= { els100SwitchManager 4 } + + els100SwitchTrapRcvr3 OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the third SNMP manager to which traps + from the system are directed." + ::= { els100SwitchManager 5 } + + els100SwitchTrapCommunity3 OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..60)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The community name of the third SNMP manager to which traps + from the system are directed." + ::= { els100SwitchManager 6 } + + els100SwitchTrapRcvr4 OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the fourth SNMP manager to which traps + from the system are directed." + ::= { els100SwitchManager 7 } + + els100SwitchTrapCommunity4 OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..60)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The community name of the fourth SNMP manager to which traps + from the system are directed." + ::= { els100SwitchManager 8 } + + els100SwitchPortMirroringStatus OBJECT-TYPE + SYNTAX INTEGER{ + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Port Mirroring status of the system, either disable + or enable." + ::= { els100Switch 7 } + + els100SwitchMirroredPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The port that is being mirrored - the source." + ::= { els100Switch 8 } + + els100SwitchMirroringPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The port that is mirroring - the destination." + ::= { els100Switch 9 } + + els100SwitchXmitMirrorEnable OBJECT-TYPE + SYNTAX INTEGER{ + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enable or disable the mirroring of transmitted traffic + out the mirrored port to the mirroring port." + ::= { els100Switch 10 } + + els100SwitchRcvMirrorEnable OBJECT-TYPE + SYNTAX INTEGER{ + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enable or disable the mirroring of received traffic + into the mirrored port to the mirroring port." + ::= { els100Switch 11 } + + els100SwitchVlanEnable OBJECT-TYPE + SYNTAX INTEGER{ + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Globally enable or disable the VLAN operation of the + system." + ::= { els100Switch 12 } + + -- Switch Info Vlan table - indexed by VLAN + + els100SwitchVlanConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els100SwitchVlanEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The VLAN configuration table." + ::= { els100Switch 13 } + + els100SwitchVlanEntry OBJECT-TYPE + SYNTAX Els100SwitchVlanEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the VLAN configuration table." + INDEX { els100SwitchVlanId } + ::= { els100SwitchVlanConfigTable 1 } + + Els100SwitchVlanEntry ::= + SEQUENCE { + els100SwitchVlanId + INTEGER, + els100SwitchVlanName + DisplayString, + els100SwitchVlanPorts + OCTET STRING, + els100SwitchVlanEgressPorts + OCTET STRING, + els100SwitchVlanStatus + INTEGER + } + + els100SwitchVlanId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The number of the VLAN, from 1 to the number of VLAN's + supported on the system." + ::= { els100SwitchVlanEntry 1 } + + els100SwitchVlanName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..60)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A descriptive string of up to 60 characters used by the + network administrator to name the VLAN." + ::= { els100SwitchVlanEntry 2 } + + els100SwitchVlanPorts OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The set of ports in the VLAN. For systems supporting + tagged VLAN's, these are the ports to which packets + on the VLAN are sent untagged. Each octet within the + value of this object specifies a set of eight ports, + with the first octet specifying ports 1 through 8, the + second octet specifying ports 9 through 16, etc. Within + each octet, the most significant bit represents the + lowest numbered port, and the least significant bit + represents the highest numbered port. Thus each port + of the system is represented by a single bit within the + value of this object. If that bit has a value of '1' + then that port is included in the VLAN; the port is not + included if its bit has a value of '0'." + ::= { els100SwitchVlanEntry 3 } + + els100SwitchVlanEgressPorts OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The set of ports defined to be on other VLAN's to which + tagged packets destined for this specific VLAN should + also be sent. Thus, this variable defines ports on the + system that reach stations downstream which are on this + VLAN and to which traffic may be forwarded. Each octet + within the value of this object specifies a set of eight + ports, with the first octet specifying ports 1 through 8, + the second octet specifying ports 9 through 16, etc. + Within each octet, the most significant bit represents the + lowest numbered port, and the least significant bit + represents the highest numbered port. Thus each port + of the system is represented by a single bit within the + value of this object. If that bit has a value of '1' + then that port is included in the VLAN; the port is not + included if its bit has a value of '0'." + ::= { els100SwitchVlanEntry 4 } + + els100SwitchVlanStatus OBJECT-TYPE + SYNTAX INTEGER{ + enable (1), + disable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Control variable used to enable or disable the operation + of the associated VLAN in the system." + ::= { els100SwitchVlanEntry 5 } + + els100SwitchVlanPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els100SwitchVlanPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The VLAN port configuration table." + ::= { els100Switch 14 } + + els100SwitchVlanPortEntry OBJECT-TYPE + SYNTAX Els100SwitchVlanPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the VLAN port configuration table." + INDEX { els100SwitchVlanPortId } + ::= { els100SwitchVlanPortTable 1 } + + Els100SwitchVlanPortEntry ::= + SEQUENCE { + els100SwitchVlanPortId + INTEGER, + els100SwitchVlanPvid + INTEGER, + els100SwitchVlanPortType + INTEGER + } + + els100SwitchVlanPortId OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of the port, from 1 to number of ports + in the system." + ::= { els100SwitchVlanPortEntry 1 } + + els100SwitchVlanPvid OBJECT-TYPE + SYNTAX INTEGER (1..4095) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The port's VLAN ID. For tagged VLAN's, this variable + defines a 12 bit port VLAN ID (PVID) used as the + identifier of the VLAN in the packet tag." + ::= { els100SwitchVlanPortEntry 2 } + + els100SwitchVlanPortType OBJECT-TYPE + SYNTAX INTEGER{ + hybrid (1), + access (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "For tagged VLAN's, the VLAN port type, either hybrid or + access. Hybrid ports allow both tagged and untagged + packets to enter the switch. Access ports only accept + untagged packets." + ::= { els100SwitchVlanPortEntry 3 } + + els100SwitchPriorityEnable OBJECT-TYPE + SYNTAX INTEGER{ + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Globally enable or disable the Class of Service traffic + priority mechanism for the system." + ::= { els100Switch 15 } + + els100SwitchPriorityThreshold OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The global priority threshold level for the system + at which VLAN tagged frames entering the associated + port are assigned a high priority. This variable can + have a value from (0...7). Traffic with a priority level + equal to or above this value are high priority. Traffic + with a priority level below this value are normal priority." + ::= { els100Switch 16 } + + els100SwitchPriorityPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els100SwitchPriorityPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The priority port table." + ::= { els100Switch 17 } + + els100SwitchPriorityPortEntry OBJECT-TYPE + SYNTAX Els100SwitchPriorityPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the port priority table." + INDEX { els100SwitchPriorityPortId } + ::= { els100SwitchPriorityPortTable 1 } + + Els100SwitchPriorityPortEntry ::= + SEQUENCE { + els100SwitchPriorityPortId + INTEGER, + els100SwitchPriorityDefault + INTEGER + } + + els100SwitchPriorityPortId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The port number, from 1 to number of ports in the + system." + ::= { els100SwitchPriorityPortEntry 1 } + + els100SwitchPriorityDefault OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The port priority level assigned to untagged + traffic entering the associated port. This variable + can have a value in the range (0...7). This value is + compared to the value of the els100SwitchPriorityThreshold + variable to determine if the traffic on the port is + high or normal." + ::= { els100SwitchPriorityPortEntry 2 } + + + els100SwitchSpanningTreeStandby OBJECT-TYPE + SYNTAX INTEGER{ + disable (1), + enable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Globally enable or disable Spanning Tree Standby. + If set to disable, every port will instanly enter + forwarding mode after link up" + ::= { els100Switch 18 } + +END |