diff options
Diffstat (limited to 'MIBS/enterasys/CTRON-OIDS')
| -rw-r--r-- | MIBS/enterasys/CTRON-OIDS | 8370 |
1 files changed, 8370 insertions, 0 deletions
diff --git a/MIBS/enterasys/CTRON-OIDS b/MIBS/enterasys/CTRON-OIDS new file mode 100644 index 0000000..cd9af0b --- /dev/null +++ b/MIBS/enterasys/CTRON-OIDS @@ -0,0 +1,8370 @@ +CTRON-OIDS DEFINITIONS ::= BEGIN + +IMPORTS + enterprises + FROM RFC1155-SMI; + +cabletron OBJECT IDENTIFIER ::= { enterprises 52 } + +-- Organization +-- Enterasys Networks +-- ContactInfo +-- Postal: Enterasys Networks +-- 50 Minuteman Rd. +-- Andover, MA 01801-1008 +-- USA +-- Phone: +1 978 684 1000 +-- E-mail: support@enterasys.com +-- WWW: http://www.enterasys.com +-- Description +-- ctron-oids.txt +-- Part Number: 2170562-01 +-- LAST-UPDATED "200311041539Z" - Tue Nov 4 15:39 GMT 2003 +-- REVISION "200311041539Z" - Tue Nov 4 15:39 GMT 2003 +-- DESCRIPTION "Added OIDs for powerPC8241 and powerPC8245." +-- +-- REVISION "September 11, 2001" +-- DESCRIPTION "Revision: 1.19.15" +-- +-- This module provides authoritative definitions for part +-- of the naming tree below: +-- +-- cabletron { enterprises 52 } +-- +-- This module will be extended, as additional sub-sections +-- of this naming tree are defined. +-- +-- Enterasys Networks reserves the right to make changes in +-- specification and other information contained in this document +-- without prior notice. The reader should consult Enterasys Networks +-- to determine whether any such changes have been made. +-- +-- In no event shall Enterasys Networks be liable for any incidental, +-- indirect, special, or consequential damages whatsoever (including +-- but not limited to lost profits) arising out of or related to this +-- document or the information contained in it, even if Enterasys +-- Networks has been advised of, known, or should have known, the +-- possibility of such damages. +-- +-- Enterasys grants vendors, end-users, and other interested parties +-- a non-exclusive license to use this Specification in connection +-- with the management of Enterasys or Cabletron products. +-- +-- Copyright February 1999 Cabletron Systems +-- Copyright September 2001 Enterasys Networks +-- +-- The assigned enterprise MIB tree for Cabletron System + +namingTree OBJECT IDENTIFIER ::= { cabletron 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- All Cabletron identification object identifiers. + +v2conformance OBJECT IDENTIFIER ::= { cabletron 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cabletron v2conformance tree. All MIBs which comply to v2 +-- standards are identified under this branch. The actual +-- object definitions for the compliance statements and agent +-- ability statements are contained in their corresponding +-- MIB module. + +trapDefinitions OBJECT IDENTIFIER ::= { cabletron 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- With the advent of SNMPv2 all traps are identified via +-- an OID. This branch of the Cabletron naming tree is +-- reserved for all Cabletron trap definitions. + +chassisType OBJECT IDENTIFIER ::= { namingTree 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the chassis type naming tree. Every chassis has a +-- unique value in this branch. + +ctUnknown OBJECT IDENTIFIER ::= { chassisType 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- If the chassis type is unknown this value is used. + +ctMMAC8 OBJECT IDENTIFIER ::= { chassisType 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC8 chassis. + +ctMMAC5 OBJECT IDENTIFIER ::= { chassisType 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC5 chassis type. + +ctMMAC3 OBJECT IDENTIFIER ::= { chassisType 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC3 chassis type. + +ctMINIMMAC OBJECT IDENTIFIER ::= { chassisType 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Mini-MMAC chassis type. + +ctMRXI OBJECT IDENTIFIER ::= { chassisType 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MRXi-24 chassis type. + +ctM3FNBShunt OBJECT IDENTIFIER ::= { chassisType 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctM5FNBShunt OBJECT IDENTIFIER ::= { chassisType 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctM8FNB OBJECT IDENTIFIER ::= { chassisType 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctNonFNB OBJECT IDENTIFIER ::= { chassisType 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The non FNB chassis type. + +ctMMAC3FNBShunt OBJECT IDENTIFIER ::= { chassisType 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctMMAC5FNBShunt OBJECT IDENTIFIER ::= { chassisType 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctMMAC8FNBShunt OBJECT IDENTIFIER ::= { chassisType 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctM8FNBShunt OBJECT IDENTIFIER ::= { chassisType 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctTRXI OBJECT IDENTIFIER ::= { chassisType 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The TRXI chassis type. + +ctStandAlone OBJECT IDENTIFIER ::= { chassisType 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This type is used for all standalone chassis. + +ctMMACPlus14 OBJECT IDENTIFIER ::= { chassisType 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The 14 device slot MMAC Plus chassis. + +ctMMACPlus6 OBJECT IDENTIFIER ::= { chassisType 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The 6 device slot MMAC Plus chassis. + +ctWanCyberSwitchNE2000 OBJECT IDENTIFIER ::= { chassisType 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router with 3 slots to accomodate multiple WAN +-- technologies. Up to 8 ISDN BRI ports or 2 PRI ports, Digital +-- Modem, V.35 and Dedicated Lines. Supports TCP/IP and optionally +-- IPX, Frame Relay and X.25. Supports ML-PPP and compression. Single +-- or dual port Ethernet capability. + +ctWanCyberSwitchNe4000 OBJECT IDENTIFIER ::= { chassisType 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router with 6 slots to accomodate multiple WAN +-- technologies. Up to 16 ISDN BRI ports or 4 PRI ports, Digital +-- Modem, V.35 and Dedicated Lines. Supports TCP/IP and optionally +-- IPX, Frame Relay and X.25. Supports ML-PPP and compression. Single +-- or dual port Ethernet capability. + +ctWanCyberSwitchNE5000 OBJECT IDENTIFIER ::= { chassisType 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router with 8 slots to accomodate multiple WAN +-- technologies. Up to 24 ISDN BRI ports or 6 PRI ports, Digital +-- Modem, V.35 and Dedicated Lines. Supports TCP/IP and optionally +-- IPX, Frame Relay and X.25. Supports ML-PPP and compression. Single +-- or dual port Ethernet capability. + +moduleType OBJECT IDENTIFIER ::= { namingTree 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This naming tree is for all older Cabletron modules. Newer +-- devices are defined under { namingTree 9 }. + +mtThinMim1 OBJECT IDENTIFIER ::= { moduleType 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtFDMMIM24 OBJECT IDENTIFIER ::= { moduleType 32 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtFDMMIM14to46 OBJECT IDENTIFIER ::= { moduleType 33 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI to Ethernet Bridge/Management (MIM MMF A/B and 4 STP M ports, +-- 6 STP DB 9 M ports, 6 UTP M ports, 6 STP RJ45 M ports) + +mtFDMMIM04To44 OBJECT IDENTIFIER ::= { moduleType 34 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI to Ethernet Bridge/Management MIM 4 SAS to 4 STP M ports + +mtFDMMIM00 OBJECT IDENTIFIER ::= { moduleType 35 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI to Ethernet Bridge/Management MIM + +mtFDMMIM30 OBJECT IDENTIFIER ::= { moduleType 39 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI to Ethernet Bridge/Management SMF A/B + +mtFDCMIM28 OBJECT IDENTIFIER ::= { moduleType 40 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI Concentrator with 8 UTP M ports + +mtFDCMIM18 OBJECT IDENTIFIER ::= { moduleType 41 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI Concentrator with 8 STP M ports + +mtFDCMIM08 OBJECT IDENTIFIER ::= { moduleType 42 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI Concentrator with 8 PMD M ports + +mtFDCMIM04 OBJECT IDENTIFIER ::= { moduleType 43 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI Concentrator with 4 PMD M ports + +mtFDCMIM24 OBJECT IDENTIFIER ::= { moduleType 44 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI Concentrator with 4 UTP M ports + +mtFDCMIM14 OBJECT IDENTIFIER ::= { moduleType 45 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI Concentrator with 4 STP M ports + +mtFDCMIM38 OBJECT IDENTIFIER ::= { moduleType 46 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI Concentrator with 8 SMF M ports + +mtFDCMIM34 OBJECT IDENTIFIER ::= { moduleType 47 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI Concentrator with 4 SMF M ports + +mtTRMIM12 OBJECT IDENTIFIER ::= { moduleType 48 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port STP DB9s + +mtTRMIM10R OBJECT IDENTIFIER ::= { moduleType 49 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10 Port STP DB9s, Ring-In/Ring-Out copper + +mtTRMIM22 OBJECT IDENTIFIER ::= { moduleType 50 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port UTP with RJ45s + +mtTRMIM20R OBJECT IDENTIFIER ::= { moduleType 51 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10 Port UTP with RJ45 with Ring-In/Ring-Out DB9 + +mtTRMIM62A OBJECT IDENTIFIER ::= { moduleType 52 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port COAX with BNC connectors. + +mtTRMIM24ToA OBJECT IDENTIFIER ::= { moduleType 54 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port UTP with RJ45, passive to active + +mtTRMIM22ToA OBJECT IDENTIFIER ::= { moduleType 55 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port UTP with RJ45, passive to active + +mtTRFMIM28 OBJECT IDENTIFIER ::= { moduleType 56 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 18 Port with multi-mode fiber ST connectors + +mtTRFMIM22 OBJECT IDENTIFIER ::= { moduleType 57 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port multi-mode fiber with ST connectors + +mtTRRMIMA OBJECT IDENTIFIER ::= { moduleType 58 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token-Ring Repeater with copper/fiber Ring-In/Ring-Out + +mtTRFMIM26 OBJECT IDENTIFIER ::= { moduleType 59 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 6 Port multi-mode fiber with ST connectors + +mtTRMIM34A OBJECT IDENTIFIER ::= { moduleType 60 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port active UTP with 2 50 Pos + +mtTRMIM32A OBJECT IDENTIFIER ::= { moduleType 61 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port active UTP with 1 50 Pos + +mtTRMIM44ToA OBJECT IDENTIFIER ::= { moduleType 62 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port STP with shielded RJ45s, passive to active + +mtTRMIM42ToA OBJECT IDENTIFIER ::= { moduleType 63 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port STP with shielded RJ45s, passive to active + +mtTPMIMT1 OBJECT IDENTIFIER ::= { moduleType 65 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10Base-T, 12 DB9s, non-ASIC based + +mtTPMIMT OBJECT IDENTIFIER ::= { moduleType 66 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10Base-T, 12 RJ45s non-ASIC based + +mtTPMIMT3 OBJECT IDENTIFIER ::= { moduleType 67 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10Base-T, 1 50 Pos., non-ASIC based + +mtThinMim2 OBJECT IDENTIFIER ::= { moduleType 80 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtTPMIM24 OBJECT IDENTIFIER ::= { moduleType 96 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10Base-T, 24 RJ45s, ASIC based + +mtTPMIM22 OBJECT IDENTIFIER ::= { moduleType 97 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10Base-T, 12 RJ45s, ASIC based + +mtTPMIM34 OBJECT IDENTIFIER ::= { moduleType 98 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10Base-T, 2 50 Pos, ASIC based + +mtTPMIM32 OBJECT IDENTIFIER ::= { moduleType 99 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10Base-T, 1 50 Pos, ASIC based + +mtTPRMIM100I OBJECT IDENTIFIER ::= { moduleType 111 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC Module - 22 port (RJ45 with one EPIM slot) +-- 100Base-TX repeater module with management + +mtTPRMIM33 OBJECT IDENTIFIER ::= { moduleType 112 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 13 Port 10Base-T, 1 50 Post with Ethernet Port Interface Module + +mtTPRMIM36 OBJECT IDENTIFIER ::= { moduleType 113 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 26 Port 10Base-T, 2 50 Pos, AUI/Ethernet Port Interface Module + +mtCXRMIM OBJECT IDENTIFIER ::= { moduleType 114 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 13 Port 10Base-2, with Ethernet Port Interface Module + +mtFORMIM22 OBJECT IDENTIFIER ::= { moduleType 115 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10Base-FF/FOIRL, ST + +mtTPRMIM20 OBJECT IDENTIFIER ::= { moduleType 116 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 9 Port 10Base-T RJ45s, with Ethernet Port Interface Module + +mtTPRMIM22 OBJECT IDENTIFIER ::= { moduleType 117 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 21 Port 10Base-T RJ45s, with Ethernet Port Interface Module + +mtTPRMIM20S OBJECT IDENTIFIER ::= { moduleType 118 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 9 Port 10Base-T RJ45s with one EPIM all ports support +-- LANVIEW/SECURE + +mtTPRMIM22S OBJECT IDENTIFIER ::= { moduleType 119 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 21 Port 10Base-T RJ45s with one EPIM all ports support +-- LANVIEW/SECURE. + +mtTPRMIM33S OBJECT IDENTIFIER ::= { moduleType 120 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 13 Port 10Base-T 1 50 Post with EPIM all ports support +-- LANVIEW/SECURE. + +mtTPRMIM36S OBJECT IDENTIFIER ::= { moduleType 121 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 26 Port 10Base-T 2 50 Post with EPIM all ports support +-- LANVIEW/SECURE. + +mtCXRMIMs OBJECT IDENTIFIER ::= { moduleType 122 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 13 Port 10Base-2 with EPIM all ports support +-- LANVIEW/SECURE. + +mtFormim22S OBJECT IDENTIFIER ::= { moduleType 123 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10Base-FF/FIORL, ST all ports support +-- LANVIEW/SECURE. + +mtFBRMIM26 OBJECT IDENTIFIER ::= { moduleType 126 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 6 Port 10Base-FB RIC Media Interface Module + +mtFBRMIM22 OBJECT IDENTIFIER ::= { moduleType 127 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10Base-FB RIC Media Interface Module + +mtFOMIM18 OBJECT IDENTIFIER ::= { moduleType 144 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FOIRL, 18 Ports, SMA ASIC based + +mtFOMIM12 OBJECT IDENTIFIER ::= { moduleType 146 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FOIRL, 12 Ports, SMA ASIC based + +mtFOMIM16 OBJECT IDENTIFIER ::= { moduleType 147 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FOIRL, 6 Ports, SMA ASIC based + +mtFOMIM28 OBJECT IDENTIFIER ::= { moduleType 148 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FOIRL, 18 Ports, ST ASIC based + +mtFOMIM22 OBJECT IDENTIFIER ::= { moduleType 150 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FOIRL, 12 Ports, ST ASIC based + +mtFOMIM26 OBJECT IDENTIFIER ::= { moduleType 151 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FOIRL, 6 Ports, ST ASIC based + +mtFOMIM38 OBJECT IDENTIFIER ::= { moduleType 152 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single Mode Fiber, 18 Ports, ST + +mtFOMIM32 OBJECT IDENTIFIER ::= { moduleType 154 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single Mode Fiber, 12 Ports, ST + +mtFOMIM36 OBJECT IDENTIFIER ::= { moduleType 155 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single Mode Fiber, 6 Ports, ST + +mtMT8MIM OBJECT IDENTIFIER ::= { moduleType 160 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtIRM2 OBJECT IDENTIFIER ::= { moduleType 176 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ASIC Based IRM for Ethernet + +mtIRBM OBJECT IDENTIFIER ::= { moduleType 177 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 Port Bridging/Management Module + +mtIRM3 OBJECT IDENTIFIER ::= { moduleType 178 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Advanced IRM-2 + +mtTRMM1 OBJECT IDENTIFIER ::= { moduleType 179 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- New TRMM + +mtTRMM2 OBJECT IDENTIFIER ::= { moduleType 180 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring to Token Ring Module-One frontpanel one +-- backplane + +mtTRMMIM1 OBJECT IDENTIFIER ::= { moduleType 181 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Mid Chassis TRMM + +mtEFDMIM OBJECT IDENTIFIER ::= { moduleType 182 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet to FDDI Bridge + +mtTRMM4 OBJECT IDENTIFIER ::= { moduleType 183 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 4 port Token Ring Management Module. + +mtTRBMIM OBJECT IDENTIFIER ::= { moduleType 184 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring to Token Ring Bridge module. + +mtEMME OBJECT IDENTIFIER ::= { moduleType 185 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 4 Port Bridging/Management + +mtESXMIM OBJECT IDENTIFIER ::= { moduleType 186 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet Switching Module, IMIM + +mtTRMM OBJECT IDENTIFIER ::= { moduleType 187 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring Management Module, slot 1 + +mtTRMMIM2 OBJECT IDENTIFIER ::= { moduleType 188 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring to Token Ring Bridge/Management Media Interface Modules + +mtETWMIM OBJECT IDENTIFIER ::= { moduleType 189 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet/Token Ring/WAN Bridge + +mtTRMMIM OBJECT IDENTIFIER ::= { moduleType 190 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Mid Chassis TRMM + +mtESXMIMF2 OBJECT IDENTIFIER ::= { moduleType 191 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet switching module with multimode fiber ST +-- connectors. + +mtFOT12or22 OBJECT IDENTIFIER ::= { moduleType 192 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +-- RESERVED for ESXMIM22 OBJECT IDENTIFIER ::= { moduleType 200 } +-- reserved for Jerry Baur +-- OBJECT-IDENTITY +-- Status +-- mandatory + +-- RESERVED for 100TPRMIM OBJECT IDENTIFIER ::= { moduleType 201 } +-- reserved for Jerry Baur +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtTPTMIM OBJECT IDENTIFIER ::= { moduleType 208 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtFOT16or26 OBJECT IDENTIFIER ::= { moduleType 224 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtSNACRS232wRS232 OBJECT IDENTIFIER ::= { moduleType 240 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 with RS232 DB + +mtSNACRS232wV35 OBJECT IDENTIFIER ::= { moduleType 241 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 with V.35 DB + +mtSNACRS232wRS530 OBJECT IDENTIFIER ::= { moduleType 242 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 with RS530 DB + +mtSNACRS232wNoDB OBJECT IDENTIFIER ::= { moduleType 243 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 without DB + +mtSNACV35wRS232 OBJECT IDENTIFIER ::= { moduleType 244 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 with RS232 DB + +mtSNACV35wV35 OBJECT IDENTIFIER ::= { moduleType 245 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 with V.35 DB + +mtSNACV35wRS350 OBJECT IDENTIFIER ::= { moduleType 246 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 with RS530 DB + +mtSNACV35wNoDB OBJECT IDENTIFIER ::= { moduleType 247 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 without DB + +mtSNACRS530wRS232 OBJECT IDENTIFIER ::= { moduleType 248 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS530 with RS232 DB + +mtSNACRS530wV35 OBJECT IDENTIFIER ::= { moduleType 249 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS530 with V.35 DB + +mtSNACRS530wRS530 OBJECT IDENTIFIER ::= { moduleType 250 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS530 with RS530 DB + +mtSNACRS530wNoDB OBJECT IDENTIFIER ::= { moduleType 251 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS530 without DB + +mtSNACMIMConnectivity OBJECT IDENTIFIER ::= { moduleType 252 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SNA Connectivity Media Interface Module + +mtSNACConnectivityMIM OBJECT IDENTIFIER ::= { moduleType 253 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SNA Connectivity Media Interface Module + +mtSNACConnectivity OBJECT IDENTIFIER ::= { moduleType 254 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SNA Connectivity Media Interface Module + +mtNull OBJECT IDENTIFIER ::= { moduleType 255 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- No Media Interface Module Installed + +mtTRMIMa10R OBJECT IDENTIFIER ::= { moduleType 305 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10 Port STP DB9s, Ring-In/Ring-Out with autowrap feature + +mtTRMIMa20R OBJECT IDENTIFIER ::= { moduleType 307 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10 Port UTP with RJ45s with Ring-In/Ring-Out DB9 with autowrap feature + +mtTRMIM22ARO OBJECT IDENTIFIER ::= { moduleType 311 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- active MIM with 12 UTP ports with Ring-Out capabilities (93 series) + +mtTRRMIM2A OBJECT IDENTIFIER ::= { moduleType 314 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token-Ring Repeater with 12 UTP RJ45s, DB9/Fiber Optic +-- Ring-In/Ring-Out + +mtTRMIM24ARO OBJECT IDENTIFIER ::= { moduleType 566 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- active MIM with 24 UTP ports with Ring-Out capabilities (93 series) + +mtTRRMIM4A OBJECT IDENTIFIER ::= { moduleType 570 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token-Ring Repeater with 12 STP RJ45s, DB9/Fiber Optic +-- Ring-In/Ring-Out + +mtTRRMIMAT OBJECT IDENTIFIER ::= { moduleType 826 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- repeater with no stations and TPIM Ring-In/Ring-Out + +mtTRMIM42ARO OBJECT IDENTIFIER ::= { moduleType 831 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- active MIM with 12 STP ports with Ring-Out capabilities (93 series) + +mtTRRMIM2AT OBJECT IDENTIFIER ::= { moduleType 1082 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- repeater with 12 active UTP stations and TPIM Ring-In/Ring-Out + +mtTRMIM44ARO OBJECT IDENTIFIER ::= { moduleType 1086 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- active MIM with 24 STP ports with Ring-Out capabilities (93 series) + +mtTRRMIM4AT OBJECT IDENTIFIER ::= { moduleType 1338 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- repeater with 12 active STP stations with TPIM Ring-In/Ring-Out + +mtMPIMX OBJECT IDENTIFIER ::= { moduleType 65536 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MiniMMAC XCVR 8 Male AUIs + +mtMPIMA OBJECT IDENTIFIER ::= { moduleType 65537 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MiniMMAC XCVR 8 Female AUIs + +mtMPIMC OBJECT IDENTIFIER ::= { moduleType 65538 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MiniMMAC Coax 6 Ports + +mtMPIMT OBJECT IDENTIFIER ::= { moduleType 65539 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MiniMMAC TP 6 UTP Ports + +mtMPIMF2 OBJECT IDENTIFIER ::= { moduleType 65540 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MiniMMAC FO 6 ST Ports + +mtMPIMF1 OBJECT IDENTIFIER ::= { moduleType 65541 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MiniMMAC FO 6 SMA Ports + +mtMPIMT1 OBJECT IDENTIFIER ::= { moduleType 65542 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MiniMMAC STP 6 DB-9 Ports + +mtMPIMB OBJECT IDENTIFIER ::= { moduleType 65543 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MiniMMAC Blank Plate (empty slot) + +mtMiniMMAC OBJECT IDENTIFIER ::= { moduleType 65552 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 80186 based with IRM-2 Management + +mtMRXIE OBJECT IDENTIFIER ::= { moduleType 65568 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 80186 Based with 50 Pin and 2 Single Port Interface Modules + +mtMRXI24 OBJECT IDENTIFIER ::= { moduleType 65569 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- i960 Based MRXI 24 RJ45 with 2 Ethernet Port Interface Modules + +mtMRXI22 OBJECT IDENTIFIER ::= { moduleType 65570 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- i960 Based MRXI 12 RJ45 with 1 Ethernet Port Interface Module + +mtMRXI34 OBJECT IDENTIFIER ::= { moduleType 65571 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- i960 Based MRXI 2x50 Pin with 2 Ethernet Port Interface Modules + +mtMRXI32 OBJECT IDENTIFIER ::= { moduleType 65572 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- i960 Based MRXI 1x50 Pin with 1 Ethernet Port Interface Module + +mtMRXI2E OBJECT IDENTIFIER ::= { moduleType 65584 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 80186 Based with 50 Pin and 2 Single Port Interface Modules + +mtSPIMX OBJECT IDENTIFIER ::= { moduleType 131072 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One port XCVR port Male + +mtSPIMA OBJECT IDENTIFIER ::= { moduleType 131073 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One port AUI port Female + +mtSPIMC OBJECT IDENTIFIER ::= { moduleType 131074 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One port Coax BNC + +mtSPIMT OBJECT IDENTIFIER ::= { moduleType 131075 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One port 10Base-T RJ45 + +mtSPIMF2 OBJECT IDENTIFIER ::= { moduleType 131076 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One port MultiMode Fiber with ST + +mtSPIMF1 OBJECT IDENTIFIER ::= { moduleType 131077 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port MultiMode Fiber with SMA + +mtSPIMT1 OBJECT IDENTIFIER ::= { moduleType 131078 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port 10Base-T with DB9 + +mtSPIMB OBJECT IDENTIFIER ::= { moduleType 131079 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtEPIMB OBJECT IDENTIFIER ::= { moduleType 196608 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Blank Plate (empty slot) + +mtEPIMA OBJECT IDENTIFIER ::= { moduleType 196609 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port AUI Female + +mtEPIMC OBJECT IDENTIFIER ::= { moduleType 196610 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port XCVR Male + +mtEPIMT OBJECT IDENTIFIER ::= { moduleType 196611 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port 10Base-T RJ45 + +mtEPIMF2 OBJECT IDENTIFIER ::= { moduleType 196612 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port MultiMode FO with ST + +mtEPIMF1 OBJECT IDENTIFIER ::= { moduleType 196613 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port MultiMode FO with SMA + +mtEPIMT1 OBJECT IDENTIFIER ::= { moduleType 196614 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port 10Base-T DB9 + +mtEPIMF3 OBJECT IDENTIFIER ::= { moduleType 196615 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port Single Mode FO with ST + +mtEPIMX OBJECT IDENTIFIER ::= { moduleType 196616 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port XCVR Male + +mtEPIMTfd OBJECT IDENTIFIER ::= { moduleType 196619 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port 10Base-T RJ45 with full duplex support + +mtEPIMF2fd OBJECT IDENTIFIER ::= { moduleType 196620 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port MultiMode FO with ST with full duplex support + +mtEPIMF1fd OBJECT IDENTIFIER ::= { moduleType 196621 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port MultiMode FO with SMA with full duplex support + +mtEPIMF3fd OBJECT IDENTIFIER ::= { moduleType 196622 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One Port Single Mode FO with ST with full duplex support + +mtEPIMFIXED OBJECT IDENTIFIER ::= { moduleType 196623 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ?????? + +mtMRXI OBJECT IDENTIFIER ::= { moduleType 196674 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 80186 Based with 50 Pin and 2 Single Port Interface Modules + +mtMRXI2 OBJECT IDENTIFIER ::= { moduleType 196675 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 80186 Based with 12 RJ45 and 2 Single Port Interface Modules + +slotClass OBJECT IDENTIFIER ::= { namingTree 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +csUnknown OBJECT IDENTIFIER ::= { slotClass 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +csPwrSup OBJECT IDENTIFIER ::= { slotClass 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +csMgmt OBJECT IDENTIFIER ::= { slotClass 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +csMgmtRelay OBJECT IDENTIFIER ::= { slotClass 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +csMIM OBJECT IDENTIFIER ::= { slotClass 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +backplaneType OBJECT IDENTIFIER ::= { namingTree 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +btUnknown OBJECT IDENTIFIER ::= { backplaneType 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +btBusA OBJECT IDENTIFIER ::= { backplaneType 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +btBusB OBJECT IDENTIFIER ::= { backplaneType 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +btBusC OBJECT IDENTIFIER ::= { backplaneType 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +componentType OBJECT IDENTIFIER ::= { namingTree 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch defines the different component types defined +-- within Cabletron. +-- +-- A component is defined as major device functionality such as +-- repeating, routing, bridging, switching, or other applications +-- running on the device. In general the definition of component +-- does not include basic device requirements (required for device +-- operation) such as SNMP, IP protocol stack, telnet, download, +-- and media connectivity. The existance of operational +-- functions are clearly defined by various MIB variables. For +-- example media connectivity is defined by ifType in MIB-II. + +cptUnknown OBJECT IDENTIFIER ::= { componentType 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines an unknown type of component. +-- +-- This may be used if a new function is defined but a component +-- type has yet to be assigned. Usage of this should be very +-- limited. + +cptRepeater OBJECT IDENTIFIER ::= { componentType 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A repeater for ethernet also a concentrator for FDDI. +-- This implies the existance of management for the device. + +cptMau OBJECT IDENTIFIER ::= { componentType 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An instance of a ring in a Token Ring environment. This +-- includes the ability to manage and get statistics for the +-- ring. + +cptBridge OBJECT IDENTIFIER ::= { componentType 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Bridging which includes implementation of bridge MIBs. + +cptRouter OBJECT IDENTIFIER ::= { componentType 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Routing which includes implementation of routing specific +-- MIBs. + +cptRmon OBJECT IDENTIFIER ::= { componentType 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Any implementation of RMON. This is independent of media +-- type. + +cptAgent OBJECT IDENTIFIER ::= { componentType 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The chassis manager component. This is a central entity +-- that implements the chassis MIB and therefore provides +-- knowledge of the entire chassis. + +cptLim OBJECT IDENTIFIER ::= { componentType 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Local management + +cptHostSvcs OBJECT IDENTIFIER ::= { componentType 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This includes such functionality as the protocol +-- stack, SNMP, telnet. + +cptIngMIM OBJECT IDENTIFIER ::= { componentType 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An intelligent MIM within a MMAC chassis. Intelligent MIMs +-- are managable via SNMP and may also support an implementation +-- of a chassis MIB for it's management domain. + +cptDLM OBJECT IDENTIFIER ::= { componentType 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Distributed Lan Monitor + +cptMIBNavigator OBJECT IDENTIFIER ::= { componentType 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MIB Navigator that is accessible via telnet to the +-- device. + +cptRmonHost OBJECT IDENTIFIER ::= { componentType 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Implementation of the RMON host, topn, matrix groups. + +cptRmonCapture OBJECT IDENTIFIER ::= { componentType 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Implementation of the RMON packet capture and filter +-- groups. + +cptMibMgr OBJECT IDENTIFIER ::= { componentType 15 } +-- OBJECT-IDENTITY +-- Status +-- obsolete +-- Descr +-- Initially defined to allow for separate MIB views for the +-- chassis MIB and MIB-II. No longer in use. + +cptFddiSmt OBJECT IDENTIFIER ::= { componentType 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Implementation of SMT within a FDDI network. + +cptSFPS OBJECT IDENTIFIER ::= { componentType 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The secure fast packet switch. + +cptModuleMgmt OBJECT IDENTIFIER ::= { componentType 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An intelligent module that maintains it's own management +-- environment. + +cptOrphan OBJECT IDENTIFIER ::= { componentType 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A Mau type of component for which control information +-- exists but no statistical information. + +cptATM OBJECT IDENTIFIER ::= { componentType 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The device has at least 1 ATM interface. + +cptWebview OBJECT IDENTIFIER ::= { componentType 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The embedded WEB server application used for web +-- based device management. + +cpt802p1Q OBJECT IDENTIFIER ::= { componentType 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Component type for IEEE 802.1Q refers to VLANs (industry standard +-- via IEEE). + +cpt802p1p OBJECT IDENTIFIER ::= { componentType 23 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Component type for IEEE 802.1p refers to priority queuing/dynamic +-- Multicast filtering. + +cptTrafficGen OBJECT IDENTIFIER ::= { componentType 24 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Component type for Traffic Generation capabilities. + +thrPtyModType OBJECT IDENTIFIER ::= { namingTree 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Third Party Modules + +tpMtETSMIM OBJECT IDENTIFIER ::= { thrPtyModType 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xyplex 16 port terminal server + +tpMtDNSMIM OBJECT IDENTIFIER ::= { thrPtyModType 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SGI Media Interface Module + +tpMtGatorMIM OBJECT IDENTIFIER ::= { thrPtyModType 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cayman Localtalk to Ethernet Gateway + +tpMtLanternMIM OBJECT IDENTIFIER ::= { thrPtyModType 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Novell Protocol Analyzer + +tpMtCRML OBJECT IDENTIFIER ::= { thrPtyModType 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- cisco Ethernet to Ethernet router + +tpMtCRM OBJECT IDENTIFIER ::= { thrPtyModType 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- cisco Ethernet to WAN router + +networkType OBJECT IDENTIFIER ::= { namingTree 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ntManagementTypes OBJECT IDENTIFIER ::= { networkType 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch defines the types of management that +-- may exist. + +ntInbandMgmt OBJECT IDENTIFIER ::= { ntManagementTypes 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Management over inband network. + +ntSideBandMgmt OBJECT IDENTIFIER ::= { ntManagementTypes 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Management over 'side band' non-inband network. A +-- standalone ethernet for example. + +ntOutOfBandMgmt OBJECT IDENTIFIER ::= { ntManagementTypes 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Management over out of band network for example a serial +-- bus. + +physicalType OBJECT IDENTIFIER ::= { namingTree 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portType OBJECT IDENTIFIER ::= { physicalType 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +hardwareType OBJECT IDENTIFIER ::= { physicalType 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portStandard OBJECT IDENTIFIER ::= { portType 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portXpim OBJECT IDENTIFIER ::= { portType 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portXnim OBJECT IDENTIFIER ::= { portType 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portVirtualType OBJECT IDENTIFIER ::= { portType 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portVirtualTypeSvc OBJECT IDENTIFIER ::= { portVirtualType 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Switched Virtual Circuit. + +portVirtualTypePvcLlc OBJECT IDENTIFIER ::= { portVirtualType 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LLC Encapsulation Permanent Virtual Circuit + +portVirtualTypePvcVcmux OBJECT IDENTIFIER ::= { portVirtualType 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- VC Multiplexed Permanent Virtual Circuit + +portVirtualSMB OBJECT IDENTIFIER ::= { portType 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Virtual interface used by SmartSwitch 6000 for Distributed +-- Chassis Management + +portCATV OBJECT IDENTIFIER ::= { portType 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A branch describing the possible port types used to interface a +-- device to a Cable TV infrastructure (CATV). + +portCATVUnknown OBJECT IDENTIFIER ::= { portCATV 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The physical port type is unrecognized. + +port75ohmFemaleFType OBJECT IDENTIFIER ::= { portCATV 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The CATV interface utilizes a female, 75 Ohm, F-Type connector. + +portEthernet OBJECT IDENTIFIER ::= { portStandard 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portTokenRing OBJECT IDENTIFIER ::= { portStandard 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portFDDI OBJECT IDENTIFIER ::= { portStandard 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portNotPresent OBJECT IDENTIFIER ::= { portStandard 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portATM OBJECT IDENTIFIER ::= { portStandard 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standard ATM port identifiers. + +portBackplane OBJECT IDENTIFIER ::= { portStandard 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A backplane port connection. + +portInternal OBJECT IDENTIFIER ::= { portStandard 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An internal port connection. + +portFastEthernet OBJECT IDENTIFIER ::= { portStandard 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portGigEthernet OBJECT IDENTIFIER ::= { portStandard 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standard identifiers for fixed Gigabit Ethernet ports. + +portSc1000SX OBJECT IDENTIFIER ::= { portGigEthernet 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fixed mount 1000Base-SX port supporting multimode fiber +-- with a SC connector. + +portSc1000LX OBJECT IDENTIFIER ::= { portGigEthernet 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fixed mount 1000Base-LX port supporting either multimode or +-- single mode fiber with a SC connector. + +portRJ451000T OBJECT IDENTIFIER ::= { portGigEthernet 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fixed mount 1000Base-T port supporting UTP cable with +-- a RJ-45 connectors. + + +portEpim OBJECT IDENTIFIER ::= { portXpim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portTpim OBJECT IDENTIFIER ::= { portXpim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portFpim OBJECT IDENTIFIER ::= { portXpim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portApim OBJECT IDENTIFIER ::= { portXpim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch describes all ATM PIMs as port types. + +portWpim OBJECT IDENTIFIER ::= { portXpim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch describes all WAN PIMs as port types. + +portFEpim OBJECT IDENTIFIER ::= { portXpim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch describes all fast ethernet PIMs as port types. + +portGpim OBJECT IDENTIFIER ::= { portXpim 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch describes all Gigabit PIMs as port types. + +portVapim OBJECT IDENTIFIER ::= { portXpim 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch describes all VAPIMs as port types. VAPIMS +-- are designed to be the interface module for devices +-- complying with ATM VHSIM architecture. + +portUnknown OBJECT IDENTIFIER ::= { portEthernet 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portBNC OBJECT IDENTIFIER ::= { portEthernet 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portAUI OBJECT IDENTIFIER ::= { portEthernet 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portTrans OBJECT IDENTIFIER ::= { portEthernet 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portCTp OBJECT IDENTIFIER ::= { portEthernet 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portRJ45 OBJECT IDENTIFIER ::= { portEthernet 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portDb9 OBJECT IDENTIFIER ::= { portEthernet 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portRJ71 OBJECT IDENTIFIER ::= { portEthernet 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portMmfSMA OBJECT IDENTIFIER ::= { portEthernet 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portMmfST OBJECT IDENTIFIER ::= { portEthernet 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portSmfST OBJECT IDENTIFIER ::= { portEthernet 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portBPlaneA OBJECT IDENTIFIER ::= { portEthernet 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portBPlaneB OBJECT IDENTIFIER ::= { portEthernet 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portBPlaneC OBJECT IDENTIFIER ::= { portEthernet 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portMmfMTRJb10FL OBJECT IDENTIFIER ::= { portEthernet 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 10Base-FL Multimode fiber mini MT-RJ + +portTRUnknown OBJECT IDENTIFIER ::= { portTokenRing 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portLobeUtpRJ45 OBJECT IDENTIFIER ::= { portTokenRing 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portLobeStpDb9 OBJECT IDENTIFIER ::= { portTokenRing 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portLobeStpRJ45 OBJECT IDENTIFIER ::= { portTokenRing 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portLobeMmfST OBJECT IDENTIFIER ::= { portTokenRing 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portLobeSmfST OBJECT IDENTIFIER ::= { portTokenRing 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portRingpStpDb9 OBJECT IDENTIFIER ::= { portTokenRing 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portRingpMmfST OBJECT IDENTIFIER ::= { portTokenRing 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portLobeUtpStpRJ45 OBJECT IDENTIFIER ::= { portTokenRing 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portFDDIUnknown OBJECT IDENTIFIER ::= { portFDDI 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portFDDIMmfMic OBJECT IDENTIFIER ::= { portFDDI 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode Fiber MIC. + +portFDDIUtpRJ45 OBJECT IDENTIFIER ::= { portFDDI 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Level V/category 5 UTP RJ45 connector. + +portFDDIStpRJ45 OBJECT IDENTIFIER ::= { portFDDI 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Level V/Category 5 STP RJ45 connector. + +portFDDISmfMic1 OBJECT IDENTIFIER ::= { portFDDI 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single mode Fiber MIC class 1 laser. + +portFDDIMmfSc OBJECT IDENTIFIER ::= { portFDDI 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode fiber SC connector. + +portFDDISmfSc OBJECT IDENTIFIER ::= { portFDDI 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single mode fiber SC connector. + +portFDDIMmfSt OBJECT IDENTIFIER ::= { portFDDI 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode fiber ST connector. + +portFDDISmfSt OBJECT IDENTIFIER ::= { portFDDI 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single mode fiber ST connector. + +portFDDISmLrfSc OBJECT IDENTIFIER ::= { portFDDI 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single mode long range fiber SC connector. + +portATM155MMF OBJECT IDENTIFIER ::= { portATM 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 155 MPS MMF SC duplex Sonet/SDH ATM port. + +portATM155SMF OBJECT IDENTIFIER ::= { portATM 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 155 MPS SMF SC duplex Sonet/SDH ATM port. + +portUnknownb100 OBJECT IDENTIFIER ::= { portFastEthernet 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portRJ45b100TX OBJECT IDENTIFIER ::= { portFastEthernet 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100Base-TX RJ45. + +portRJ45b100T4 OBJECT IDENTIFIER ::= { portFastEthernet 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100Base-T4 RJ45. + +portRJ45b100T2 OBJECT IDENTIFIER ::= { portFastEthernet 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100Base-T2 RJ45. + +portMmfScb100FX OBJECT IDENTIFIER ::= { portFastEthernet 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100Base-FX Multimode fiber SC. + +portSmfScb100FX OBJECT IDENTIFIER ::= { portFastEthernet 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100Base-FX Singlemode fiber SC. + +portRJ71b100TX OBJECT IDENTIFIER ::= { portFastEthernet 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portMmfMTRJb100FX OBJECT IDENTIFIER ::= { portFastEthernet 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100Base-FX Multimode fiber mini MT-RJ + +portSmfMTRJb100FX OBJECT IDENTIFIER ::= { portFastEthernet 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100Base-FX Singlemode fiber mini MT-RJ + +portEpimUnknown OBJECT IDENTIFIER ::= { portEpim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portEpimAUI OBJECT IDENTIFIER ::= { portEpim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- EPIM with AUI connector + +portEpimBNC OBJECT IDENTIFIER ::= { portEpim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- EPIM with BNC type connector. + +portEpimRJ45 OBJECT IDENTIFIER ::= { portEpim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- EPIM with RJ45 port. + +portEpimMmfST OBJECT IDENTIFIER ::= { portEpim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portEpimMmfSMA OBJECT IDENTIFIER ::= { portEpim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portEpimSmfST OBJECT IDENTIFIER ::= { portEpim 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portEpimTrans OBJECT IDENTIFIER ::= { portEpim 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portEpimThirdParty OBJECT IDENTIFIER ::= { portEpim 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Epim with internal connection to third party BRIM. + +portEpimRJ45fd OBJECT IDENTIFIER ::= { portEpim 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Full duplex epim with RJ45 connector. + +portEpimMmfSTfd OBJECT IDENTIFIER ::= { portEpim 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Full duplex epim with multi-mode fiber ST connector. + +portEpimMmfSMAfd OBJECT IDENTIFIER ::= { portEpim 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Full duplex epim with multi-mode fiber SMA connector. + +portEpimSmfSTfd OBJECT IDENTIFIER ::= { portEpim 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Full duplex epim with single-mode fiber ST connector. + +portEpimHWAUI OBJECT IDENTIFIER ::= { portEpim 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portEpim100Tx OBJECT IDENTIFIER ::= { portEpim 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100 Base TX RJ45 Epim. + +portEpim100Fx OBJECT IDENTIFIER ::= { portEpim 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100 Base FX multi-mode fiber SC Epim. + +portEpim100Fmb OBJECT IDENTIFIER ::= { portEpim 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A forward only bridge used in 100BaseTX devices, +-- populates an EPIM slot. + +portEpim1002F2 OBJECT IDENTIFIER ::= { portEpim 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 100 Base FX multi-mode expansion module + +portEpim1002F3 OBJECT IDENTIFIER ::= { portEpim 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 100 Base FX single-mode expansion module. + +portEpim1002F4 OBJECT IDENTIFIER ::= { portEpim 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 100 Base FX expansion module with a +-- singlemode port and a multimode port. + +portEpimThirdPartyBrim OBJECT IDENTIFIER ::= { portEpimThirdParty 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Epim with internal connection to third party BRIMs. + +portEpimThirdPartyNonBrim OBJECT IDENTIFIER ::= { portEpimThirdParty 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Epim with internal connection to third party daughter +-- cards. + +portEpimThirdPartyUnknown OBJECT IDENTIFIER ::= { portEpimThirdParty 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Unknown EPIM connection type. + +portEpimThirdPartyCABO OBJECT IDENTIFIER ::= { portEpimThirdPartyBrim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco CABO-E daughter card 'BRIM'. + +portTpimUnkown OBJECT IDENTIFIER ::= { portTpim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Unknown TPIM + +portTpimT1 OBJECT IDENTIFIER ::= { portTpim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM with STP DB9 connection + +portTpimF2 OBJECT IDENTIFIER ::= { portTpim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM with ST multimode fiber connectors + +portTpimT2 OBJECT IDENTIFIER ::= { portTpim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM with UTP RJ45 + +portTpimF3 OBJECT IDENTIFIER ::= { portTpim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM w/single mode fiber, ST connectors + +portTpimT4 OBJECT IDENTIFIER ::= { portTpim 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM with STP RJ45 connectors. + +portFpimUnknown OBJECT IDENTIFIER ::= { portFpim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +portFpim0 OBJECT IDENTIFIER ::= { portFpim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode Fiber MIC. + +portFpim2 OBJECT IDENTIFIER ::= { portFpim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Level V/category 5 UTP RJ45 connector. + +portFpim4 OBJECT IDENTIFIER ::= { portFpim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Level V/Category 5 STP RJ45 connector. + +portFpim5 OBJECT IDENTIFIER ::= { portFpim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single mode Fiber MIC class 1 laser. + +portFpim1 OBJECT IDENTIFIER ::= { portFpim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode fiber SC connector. + +portFpim7 OBJECT IDENTIFIER ::= { portFpim 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single mode fiber SC connector. + +portFpim8 OBJECT IDENTIFIER ::= { portFpim 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode fiber ST connector. + +portFpim9 OBJECT IDENTIFIER ::= { portFpim 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single mode fiber ST connector. + +portApim02 OBJECT IDENTIFIER ::= { portApim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 51 Mbps, OC1, UTP, RJ45 + +portApim11 OBJECT IDENTIFIER ::= { portApim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100 Mbps, TAXI, MMF, SC + +portApim21 OBJECT IDENTIFIER ::= { portApim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 155 Mbps, OC3, MMF, SC + +portApim29 OBJECT IDENTIFIER ::= { portApim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 155 Mbps, OC3, SMF, SC + +portApim67 OBJECT IDENTIFIER ::= { portApim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 45 Mbps, DS3, Coax, BNC + +portApim28 OBJECT IDENTIFIER ::= { portApim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 155 Mbps, OC3, multi-mode fiber, ST + +portApim22 OBJECT IDENTIFIER ::= { portApim 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 155 Mbps, STS3, UTP, RJ45 + +portApimUnknown OBJECT IDENTIFIER ::= { portApim 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An unknown APIM + +portApim29LR OBJECT IDENTIFIER ::= { portApim 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 155 Mbps, OC3, SMF-LR, SC + +portApim31 OBJECT IDENTIFIER ::= { portApim 10 } +-- OBJECT-IDENTITY +-- Status +-- deprecated +-- Descr +-- 622 Mbps, OC12, MMF, SC + +portApim39 OBJECT IDENTIFIER ::= { portApim 11 } +-- OBJECT-IDENTITY +-- Status +-- deprecated +-- Descr +-- 622 Mbps, OC12, SMF-SR, SC + +portApim39LR OBJECT IDENTIFIER ::= { portApim 12 } +-- OBJECT-IDENTITY +-- Status +-- deprecated +-- Descr +-- 622 Mbps, OC12, SMF-LR, SC + + +portVapim31 OBJECT IDENTIFIER ::= { portVapim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 622 Mbps, OC12, MMF, SC for ATM VHSIM + +portVapim39 OBJECT IDENTIFIER ::= { portVapim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 622 Mbps, OC12, SMF-SR, SC for ATM VHSIM + +portVapim39LR OBJECT IDENTIFIER ::= { portVapim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 622 Mbps, OC12, SMF-LR, SC for ATM VHSIM + +portWpimUnknown OBJECT IDENTIFIER ::= { portWpim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Unknown type of WPIM. + +portWpimT1 OBJECT IDENTIFIER ::= { portWpim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting a T1/PRI CSU/DSU + +portWpimE1 OBJECT IDENTIFIER ::= { portWpim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting a E1/PRI CSU/DSU + +portWpimSy OBJECT IDENTIFIER ::= { portWpim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting a Synchronous Serial Interface + +portWpimDDS OBJECT IDENTIFIER ::= { portWpim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting a DDS/SW56 CSU/DSU + +portWpimDI OBJECT IDENTIFIER ::= { portWpim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting drop and insert. + +portWpimHDSL OBJECT IDENTIFIER ::= { portWpim 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting HDSL. + +portWpimBRI OBJECT IDENTIFIER ::= { portWpim 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting a ISDN basic rate Interface + +portWpimDS30 OBJECT IDENTIFIER ::= { portWpim 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting DS30. + +portWpimDataCapableDI OBJECT IDENTIFIER ::= { portWpim 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting Drop and Inser with capability to +-- process data from D/I interface. + +portWpimT1DDS OBJECT IDENTIFIER ::= { portWpim 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WPIM supporting mode switching from DDS to T1 +-- and vice versa. + +portWpimRDDS OBJECT IDENTIFIER ::= { portWpim 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Respin of WPIM supporting a DDS/SW56 CSU/DSU + +portWpimRT1 OBJECT IDENTIFIER ::= { portWpim 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Respin of WPIM supporting a T1/PRI CSU/DSU + +portWpimRE1 OBJECT IDENTIFIER ::= { portWpim 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Respin of WPIM supporting a E1/PRI CSU/DSU + +portFEUnknown OBJECT IDENTIFIER ::= { portFEpim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Unknown fast ethernet module. + +portFE100TxUTP OBJECT IDENTIFIER ::= { portFEpim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100BaseTX Fast LAN Switch Interface RJ 45 UTP plug in +-- module. + +portFE100TxSTP OBJECT IDENTIFIER ::= { portFEpim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100BaseTX Fast LAN Switch Interface DB9 STP plug in +-- module. + +portFE100Fx OBJECT IDENTIFIER ::= { portFEpim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100BaseFX Fast LAN Switch Interface Multimode fiber SC +-- connector, plug in module. + +portFE100VG4 OBJECT IDENTIFIER ::= { portFEpim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100Base-VG Interface module supports RJ45 connector +-- for UTP 4 pair. + +portFE100VGF OBJECT IDENTIFIER ::= { portFEpim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100Base-VG Interface module supports multimode fiber +-- SC connector. + +portFE100F3 OBJECT IDENTIFIER ::= { portFEpim 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100BaseFX Fast LAN Switch Interface singlemode fiber SC +-- connector, plug in module. + +portFE100S1 OBJECT IDENTIFIER ::= { portFEpim 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fast ethernet to SONET PIM with multimode fiber +-- SC connector. + +portFE100S3 OBJECT IDENTIFIER ::= { portFEpim 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fast ethernet to SONET PIM with single mode fiber +-- SC connector. + +portFE100S5 OBJECT IDENTIFIER ::= { portFEpim 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fast ethernet to SONET PIM with single mode fiber +-- SC connector, long reach. + +portFE100LH OBJECT IDENTIFIER ::= { portFEpim 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100BaseFX Fast LAN Switch Interface singlemode fiber SC +-- connector, extended distance plug in module. + +portGpimF01 OBJECT IDENTIFIER ::= { portGpim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 Gigabit Fiber Channel with multimode fiber SC connectors. + +portGpimF09 OBJECT IDENTIFIER ::= { portGpim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 Gigabit Fiber Channel with singlemode fiber SC connectors. + +portGpimS41 OBJECT IDENTIFIER ::= { portGpim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1.2 Gigabit SONET with multimode fiber SC connectors. + +portGpimS49 OBJECT IDENTIFIER ::= { portGpim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1.2 Gigabit SONET with singlemode fiber SC connectors. + +portGpimS51 OBJECT IDENTIFIER ::= { portGpim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2.4 Gigabit SONET with multimode fiber SC connectors. + +portGpimS59 OBJECT IDENTIFIER ::= { portGpim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2.4 Gigabit SONET with singlemode fiber SC connectors. + +portGpimS31 OBJECT IDENTIFIER ::= { portGpim 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 622 Megabit SONET with multimode fiber SC connectors. + +portGpimS39 OBJECT IDENTIFIER ::= { portGpim 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 622 Megabit SONET with singlemode fiber SC connectors. + +portGpim01 OBJECT IDENTIFIER ::= { portGpim 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1000Base-SX with multimode fiber SC connectors. The +-- laser is an 850 nanometer optical laser. + +portGpim04 OBJECT IDENTIFIER ::= { portGpim 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1000Base-CX with 150 ohm shielded style 2 connectors + +portGpim09 OBJECT IDENTIFIER ::= { portGpim 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1000Base-LX with single or multi-mode fiber SC +-- connector. The laser is a 1300 nanometer optical laser + +portGpim08 OBJECT IDENTIFIER ::= { portGpim 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1000Base-LX extended distance with single-mode fiber SC. + +portAnim OBJECT IDENTIFIER ::= { portXnim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch describes all ATM NIMs as port types. + +portAnim21p3 OBJECT IDENTIFIER ::= { portAnim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 3 port I/O module, 155 Mbps, OC3c, with multimode fiber SC connector. + +portAnim29p3 OBJECT IDENTIFIER ::= { portAnim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 3 port I/O module, 155 Mbps, OC3c, with singlemode fiber SC connector. + +portAnim22p4 OBJECT IDENTIFIER ::= { portAnim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 4 port I/O module, 155 Mbps, STS3c, with UTP5 RJ-45 connector. + +portAnim31p2 OBJECT IDENTIFIER ::= { portAnim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port I/O module, 622 Mbps, OC12c, with multimode fiber SC connector. + +portAnim39p2 OBJECT IDENTIFIER ::= { portAnim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port I/O module, 622 Mbps, OC12c, with singlemode fiber SC connector. + +portAnim29p4LR OBJECT IDENTIFIER ::= { portAnim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 4 port I/O module, 155 Mbps, OC3, with long range singlemode fiber SC +-- connectors. + +portAnim29p3LR OBJECT IDENTIFIER ::= { portAnim 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 3 port I/O module, 155 Mbps, OC3, with long range singlemode fiber +-- SC connector. + +portAnim39p2LR OBJECT IDENTIFIER ::= { portAnim 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port I/O module, 622 Mbps, OC12, with long range singlemode fiber +-- SC connector. + +portAnim59p1LR OBJECT IDENTIFIER ::= { portAnim 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 port I/O module, 2.5 Gbps, OC48, with long range singlemode fiber +-- SC connector. + +portAnim21p4 OBJECT IDENTIFIER ::= { portAnim 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 4 port I/O module, 155 Mbps, OC3, with multimode fiber SC connector. + +portAnim29p4 OBJECT IDENTIFIER ::= { portAnim 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 4 port I/O module, 155 Mbps, OC3, with singlemode fiber SC connector. + +portAnim67p2 OBJECT IDENTIFIER ::= { portAnim 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port I/O module, 45 Mbps, DS3, with coaxial BNC connectors. + +portAnim77p2 OBJECT IDENTIFIER ::= { portAnim 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port I/O module, 33 Mbps, E3, with coaxial BNC connectors. + +portAnim51p1 OBJECT IDENTIFIER ::= { portAnim 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 port I/O module, 2.5 Gbps, OC48, with multimode fiber SC connector. + +portAnim59p1 OBJECT IDENTIFIER ::= { portAnim 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 port I/O module, 2.5 Gbps, OC48, with singlemode fiber SC connector. + +chipType OBJECT IDENTIFIER ::= { hardwareType 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +fddiMACDP83261 OBJECT IDENTIFIER ::= { chipType 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +fddiPortDP83251 OBJECT IDENTIFIER ::= { chipType 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +i960sa OBJECT IDENTIFIER ::= { chipType 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The intel 960 sa CPU. + +i960ca OBJECT IDENTIFIER ::= { chipType 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The intel 960 CA CPU. + +i960cf OBJECT IDENTIFIER ::= { chipType 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The intel 960 CF CPU. + +i960ha OBJECT IDENTIFIER ::= { chipType 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The intel 960 HA CPU + +i960hd OBJECT IDENTIFIER ::= { chipType 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The intel 960 HD CPU. + +i960ht OBJECT IDENTIFIER ::= { chipType 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The intel 960 HT CPU. + +powerPC603 OBJECT IDENTIFIER ::= { chipType 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Power PC 603 processor. + +powerPC603e OBJECT IDENTIFIER ::= { chipType 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Power PC 603e processor. + +powerPC604 OBJECT IDENTIFIER ::= { chipType 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Power PC 604 processor. + +powerPC740 OBJECT IDENTIFIER ::= { chipType 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Power PC 740 processor. + +powerMIPS5000 OBJECT IDENTIFIER ::= { chipType 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The CPU for the Omelette. + +powerPC8241 OBJECT IDENTIFIER ::= { chipType 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Power PC 8241 processor. + +powerPC8245 OBJECT IDENTIFIER ::= { chipType 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Power PC 8245 processor. + +psMonitorTypes OBJECT IDENTIFIER ::= { physicalType 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This defines a naming tree for physical power supply +-- monitoring points. + +powerSupplyMonitors OBJECT IDENTIFIER ::= { psMonitorTypes 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines a tree for all power supply monitoring types +-- ie those internal to the power supplies. + +powerSupplyInputMonitor OBJECT IDENTIFIER ::= { powerSupplyMonitors 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Describes those power supply monitors that are on the +-- input to modules, convertors etc. + +powerSupplyTermConvInput OBJECT IDENTIFIER ::= { powerSupplyMonitors 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is at the input to the termination converter input. + +powerSupplyLogicConvInput OBJECT IDENTIFIER ::= { powerSupplyMonitors 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is at the input to the DC-DC convertor for logic +-- voltage. + +powerSupplyTermOutput OBJECT IDENTIFIER ::= { powerSupplyMonitors 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the sensor at output from the termination voltage. + +powerSupplyLogicOutput OBJECT IDENTIFIER ::= { powerSupplyMonitors 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the sensor at output from the power supply for +-- logic voltage rail. + +powerSupplyHighVoltageOutput OBJECT IDENTIFIER ::= { powerSupplyMonitors 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the sensor at the output from the power supply +-- for high voltage rail. + +chassisPowerMonitors OBJECT IDENTIFIER ::= { psMonitorTypes 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines a tree for all chassis based power supply +-- monitoring types. + +chassisHighVoltageRail OBJECT IDENTIFIER ::= { chassisPowerMonitors 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the sensor on the chassis high voltage rail. + +chassisLogicRail OBJECT IDENTIFIER ::= { chassisPowerMonitors 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the sensor at the chasis logic voltage rail. + +chassisTermRail OBJECT IDENTIFIER ::= { chassisPowerMonitors 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the sensor at the termination voltage rail as +-- found on the chassis. + +modulePowerMonitors OBJECT IDENTIFIER ::= { psMonitorTypes 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines a tree for all module based power supply +-- monitoring types. + +moduleHighVoltageInput OBJECT IDENTIFIER ::= { modulePowerMonitors 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the sensor at the input to the module for the +-- high voltage rail. + +moduleLogicVoltageOutput OBJECT IDENTIFIER ::= { modulePowerMonitors 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the sensor at the output from the modules convertors +-- for logic voltage. + +moduleAux1Output OBJECT IDENTIFIER ::= { modulePowerMonitors 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the aux 1 output voltage level on the module. + +moduleAux2Output OBJECT IDENTIFIER ::= { modulePowerMonitors 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This is the aux 2 output voltage level on the module. + +mtExpanded OBJECT IDENTIFIER ::= { namingTree 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtThrdParty OBJECT IDENTIFIER ::= { mtExpanded 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the top of the third party module type naming +-- tree. + +tpAEnet OBJECT IDENTIFIER ::= { mtThrdParty 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Third PartyMIMs with A channel Ethernet connections + +mtPassaggioMim OBJECT IDENTIFIER ::= { tpAEnet 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Third party SONIX MIM providing a hardware switch for +-- either A channel backplane or front panel EPIM connection. + +tpABorC OBJECT IDENTIFIER ::= { mtThrdParty 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Third Party Media Interface Modules with A, B, or C channel +-- connections + +mtCiscoCRM3E OBJECT IDENTIFIER ::= { tpABorC 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco router with Ethernet BIB + +mtCrm2RE OBJECT IDENTIFIER ::= { tpABorC 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco Ethernet BRIM on a mother MIM. + +mtSnacMimRS232 OBJECT IDENTIFIER ::= { tpABorC 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 without DB + +mtSnacMimRS232wRS232DB OBJECT IDENTIFIER ::= { tpABorC 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 with RS232 DB + +mtSnacMimRS232wV35DB OBJECT IDENTIFIER ::= { tpABorC 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 with V.35 DB + +mtSnacMimRS232wRS422DB OBJECT IDENTIFIER ::= { tpABorC 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 with RS422DB + +mtSnacMimv35 OBJECT IDENTIFIER ::= { tpABorC 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 without DB + +mtSnacMimv35wRS232DB OBJECT IDENTIFIER ::= { tpABorC 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 with RS232 DB + +mtSnacMimV35wV35DB OBJECT IDENTIFIER ::= { tpABorC 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 with V.35 DB + +mtSnacMimV35wRS422DB OBJECT IDENTIFIER ::= { tpABorC 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 with RS422 DB + +mtSnacMimRS422DB OBJECT IDENTIFIER ::= { tpABorC 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS422 without DB + +mtSnacMimRS422wRS232DB OBJECT IDENTIFIER ::= { tpABorC 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS422 with RS232 DB + +mtSnacMimRS422wV35DB OBJECT IDENTIFIER ::= { tpABorC 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS422 with V.35 DB + +mtSnacMimRS422wRS422DB OBJECT IDENTIFIER ::= { tpABorC 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS422 with RS422 DB + +mtSnacMimSXRS232 OBJECT IDENTIFIER ::= { tpABorC 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withRS232 without DB + +mtSnacMimSXRS232wRS232DB OBJECT IDENTIFIER ::= { tpABorC 23 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withRS232 with RS232 DB + +mtSnacMimSXRS232wV35DB OBJECT IDENTIFIER ::= { tpABorC 24 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withRS232 with V.35 DB + +mtSnacMimSXRS232wRS422DB OBJECT IDENTIFIER ::= { tpABorC 25 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withRS232 with RS422DB + +mtSnacMimSXv35 OBJECT IDENTIFIER ::= { tpABorC 26 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withV.35 without DB + +mtSnacMimSXv35wRS232DB OBJECT IDENTIFIER ::= { tpABorC 27 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withV.35 with RS232 DB + +mtSnacMimSXV35wV35DB OBJECT IDENTIFIER ::= { tpABorC 28 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withV.35 with V.35 DB + +mtSnacMimSXV35wRS422DB OBJECT IDENTIFIER ::= { tpABorC 29 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withV.35 with RS422 DB + +mtSnacMimSXRS422DB OBJECT IDENTIFIER ::= { tpABorC 30 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withRS422 without DB + +mtSnacMimSXRS422wRS232DB OBJECT IDENTIFIER ::= { tpABorC 31 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withRS422 with RS232 DB + +mtSnacMimSXRS422wV35DB OBJECT IDENTIFIER ::= { tpABorC 32 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withRS422 with V.35 DB + +mtSnacMimSXRS422wRS422DB OBJECT IDENTIFIER ::= { tpABorC 33 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 486 based SNAC MIM withRS422 with RS422 DB + +tpABandC OBJECT IDENTIFIER ::= { mtThrdParty 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Third Party Media Interface Modules with A, B, and C channel +-- connections + +tpTrFNB OBJECT IDENTIFIER ::= { mtThrdParty 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring with FNB connection + +mtCiscoCRM3T OBJECT IDENTIFIER ::= { tpTrFNB 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco router with Token Ring BIB + +mtTRMMIM62A OBJECT IDENTIFIER ::= { tpTrFNB 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Coaxial module for Token Ring + +mt3174MIM OBJECT IDENTIFIER ::= { tpTrFNB 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cluster controller from IBM + +mtSNACmimRS232 OBJECT IDENTIFIER ::= { tpTrFNB 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 w/RS232 486 CPU + +mtSNACmimRS232v35db OBJECT IDENTIFIER ::= { tpTrFNB 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 with V.35 DB 486 CPU + +mtSNACmimRS232wRS422db OBJECT IDENTIFIER ::= { tpTrFNB 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 with RS422DB 486 CPU + +mtSNACmimRS232wodb486 OBJECT IDENTIFIER ::= { tpTrFNB 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS232 without DB 486 CPU + +mtSNACmimv35wRS232db OBJECT IDENTIFIER ::= { tpTrFNB 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 with RS232 DB 486 CPU + +mtSNACmimv35wv35db OBJECT IDENTIFIER ::= { tpTrFNB 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 with V.35 DB 486 CPU + +mtSNACmimv35RS422db OBJECT IDENTIFIER ::= { tpTrFNB 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 with RSA422 DB 486 CPU + +mtSNACmimv35wodb OBJECT IDENTIFIER ::= { tpTrFNB 23 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- V.35 without DB 486 CPU + +mtSNACmimRS422 OBJECT IDENTIFIER ::= { tpTrFNB 24 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS422 with RS232 DB 486 CPU + +mtSNACmimRS422wv35db OBJECT IDENTIFIER ::= { tpTrFNB 25 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS422 with v.35 DB 486 CPU + +mtSNACmimRS422wRS422db OBJECT IDENTIFIER ::= { tpTrFNB 26 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS422 with RS422 DB 486 CPU + +mtSNACmimrs433 OBJECT IDENTIFIER ::= { tpTrFNB 27 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- RS433 without DB 486 CPU + +tpTrFDDIFNB OBJECT IDENTIFIER ::= { mtThrdParty 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring with FDDI FNB connection + +tpTrAEnet OBJECT IDENTIFIER ::= { mtThrdParty 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring with TR and A channel Enet + +tpTrFDDIAEnet OBJECT IDENTIFIER ::= { mtThrdParty 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring with FDDI and A channel Enet + +tpATM OBJECT IDENTIFIER ::= { mtThrdParty 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Third part MMAC ATM modules. + +tpATMMIM OBJECT IDENTIFIER ::= { tpATM 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- AT&T developed ATM switch module with 4 ports. + +tpATMMIMx8 OBJECT IDENTIFIER ::= { tpATM 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An 8 port extension to the ATMMIM. + +tpSS1500Modular OBJECT IDENTIFIER ::= { tpATM 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM OEM from Sonoma + +tpSS1500Compact OBJECT IDENTIFIER ::= { tpATM 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM OEM from Sonoma + +tpStandAlone OBJECT IDENTIFIER ::= { mtThrdParty 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Third party standalone modules. + +tpELS10024TX OBJECT IDENTIFIER ::= { tpStandAlone 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port 10/100 TX Third party ethernet switch. + +tpELS10024TXM OBJECT IDENTIFIER ::= { tpStandAlone 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port 10/100 TX SmartStack switch with Fiber uplink. + +tpELS10024TXG OBJECT IDENTIFIER ::= { tpStandAlone 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port 10/100 TX SmartStack switch with Gigabit uplink. + +tpELH10012 OBJECT IDENTIFIER ::= { tpStandAlone 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port 10/100 TX SmartStack repeater. + +tpELH10024 OBJECT IDENTIFIER ::= { tpStandAlone 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port 10/100 TX SmartStack repeater. + +tpELS10024FXG OBJECT IDENTIFIER ::= { tpStandAlone 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port MTRJ Multimode fiber SmartStack switch 2 Modular Gigabit uplinks. + +tpELS100S24TX2M OBJECT IDENTIFIER ::= { tpStandAlone 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 24 RJ45 10/100 Fast Ethernet ports with 2 expansion slots. + +xylogicsMIMs OBJECT IDENTIFIER ::= { mtThrdParty 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics Media Interface Modules + +xylogicsCSMIM16 OBJECT IDENTIFIER ::= { xylogicsMIMs 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics 16 port communications server + +xylogicsCSMIM32 OBJECT IDENTIFIER ::= { xylogicsMIMs 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics 32 port communications server + +mtCSMIM16m2 OBJECT IDENTIFIER ::= { xylogicsMIMs 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics terminal server with 16 ports and A/B/C connectivity. + +mtMODMIM4 OBJECT IDENTIFIER ::= { xylogicsMIMs 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics terminal server with 4 modem ports and A/B/C +-- connectivity. + +mtMODMIM4x4 OBJECT IDENTIFIER ::= { xylogicsMIMs 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics terminal server with 8 modem ports and A/B/C +-- connectivity. + +mtMODMIM4x8 OBJECT IDENTIFIER ::= { xylogicsMIMs 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics terminal server with 12 modem ports and A/B/C +-- connectivity. + +mtCSMIM32m2 OBJECT IDENTIFIER ::= { xylogicsMIMs 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics CSMIM2-32 a CSMIM32 with A/B/C connectivity. + +mtCSMIMm8T1 OBJECT IDENTIFIER ::= { xylogicsMIMs 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics T1 communication server with 8 integrated modems and A/B/C +-- connectivity + +mtCSMIMm16T1 OBJECT IDENTIFIER ::= { xylogicsMIMs 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics T1 communication server with 16 integrated modems and A/B/C +-- connectivity + +mtCSMIMm24T1 OBJECT IDENTIFIER ::= { xylogicsMIMs 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics T1 communication server with 24 integrated modems and A/B/C +-- connectivity + +mtCSmimBri3 OBJECT IDENTIFIER ::= { xylogicsMIMs 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics MIM with 3 ISDN terminal adapters and A/B/C +-- connectivity. + +mtCSmimBri6 OBJECT IDENTIFIER ::= { xylogicsMIMs 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics MIM with 6 ISDN terminal adapters and A/B/C +-- connectivity. + +mtOlicom OBJECT IDENTIFIER ::= { mtThrdParty 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Description +-- Olicom Stackable Token Ring OEM branch. + +mtSTS16-20 OBJECT IDENTIFIER ::= { mtOlicom 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack Token Ring Switch from Olicom +-- with 20 RJ-45 UTP/STP ports 4/16 Mb/s. +-- This typecode actually represents a system +-- (STS16-20RM,STS16-20R,STS16-20FRM,STS16-20D). + +mtHSTS100-16RM OBJECT IDENTIFIER ::= { mtOlicom 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack High Speed Token Ring Switch from +-- Olicom with 16 RJ-45 UTP5 ports at 100 Mb/s +-- with optional redundant power supplies and 2 +-- modular uplink ports. + +mtTPSoftware OBJECT IDENTIFIER ::= { mtThrdParty 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Description +-- Third party software packages which actually have +-- mib II interfaces and process packets. + +mtBIGIP OBJECT IDENTIFIER ::= { mtTPSoftware 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Description +-- F5 Labs OEM Software BIG/IP. This OEM is +-- being handled by Ed Chang (Santa Clara). + +mt3DNS OBJECT IDENTIFIER ::= { mtTPSoftware 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Description +-- F5 Labs OEM Software 3DNS. This OEM is +-- being handled by Ed Chang (Santa Clara). + + +mtChassis OBJECT IDENTIFIER ::= { mtExpanded 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MID Chassis Cabletron Media Interface Modules + +cA OBJECT IDENTIFIER ::= { mtChassis 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MID Chassis Cabletron MIMs with A Channel Enet connection + +cABorC OBJECT IDENTIFIER ::= { mtChassis 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MID Chassis Cabletron MIMs with A, B, or C Enet connection + +cABandC OBJECT IDENTIFIER ::= { mtChassis 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MID Chassis Cabletron MIMs with A, B, and C Enet connection + +cTrFNB OBJECT IDENTIFIER ::= { mtChassis 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MID Chassis Cabletron MIMs with Token Ring FNB connection + +mtTbrmim OBJECT IDENTIFIER ::= { cTrFNB 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Mid chassis Token Ring bridge/router intelligent MIM with +-- 4 ports/1 BRIM. + +cFDDIFNB OBJECT IDENTIFIER ::= { mtChassis 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MID Chassis Cabletron MIMs with FDDI FNB connection + +cTrA OBJECT IDENTIFIER ::= { mtChassis 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MID Chassis Cabletron MIMs with TR and A channel Ethernet + +mtPCMIM OBJECT IDENTIFIER ::= { cTrA 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- PC 486 on Media Interface Module + +cFDDIA OBJECT IDENTIFIER ::= { mtChassis 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MID Chassis Cabletron MIMs with FDDI and A Channel Enet connection + +cNoABorC OBJECT IDENTIFIER ::= { mtChassis 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MID Chassis Cabletron MIMs with no A, B, or C + +sonixMIM OBJECT IDENTIFIER ::= { cNoABorC 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- No Backplane with ISDN and Ethernet on front + +mmacFPS OBJECT IDENTIFIER ::= { cNoABorC 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC connection for FPS chassis. This is a 2 MMAC slot +-- module that pulls power and ground from the MMAC chassis. + +thirdPartyBrims OBJECT IDENTIFIER ::= { mtChassis 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Tree for third party BRIM modules. + +mtCiscoBrimE OBJECT IDENTIFIER ::= { thirdPartyBrims 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco WAN(2) to Ethernet(1) bridge/router BRIM (CRBRIM-W/E) +-- connecting to Third Party EPIM port taking power only from +-- BRIM connector. + +mtCiscoBrimTR OBJECT IDENTIFIER ::= { thirdPartyBrims 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco WAN(2) to Token Ring(1) bridge/router BRIM (CRBRIM-W/T) +-- connecting to Third Party TPIM port taking power only from +-- BRIM connector. + +mtXylogicsUCS OBJECT IDENTIFIER ::= { thirdPartyBrims 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics Micro CS WAN BRIM with remote access DB for +-- MicroMMAC-E with 12 asynch ports. + +mtXylogicsUSnac OBJECT IDENTIFIER ::= { thirdPartyBrims 23 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics Micro SNAC BRIM with remote access DB for +-- MicroMMAC-E. + +mtXylogicsUSnacT OBJECT IDENTIFIER ::= { thirdPartyBrims 24 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics Micro SNAC BRIM with remote access DB for +-- MicroMMAC-T. + +mtXylogicsUBrics OBJECT IDENTIFIER ::= { thirdPartyBrims 25 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics 3 ISDN terminal adapter module for the MicroMMAC-E. + +mtEthernet OBJECT IDENTIFIER ::= { mtExpanded 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet Products using 3 registers + +mtEtherA OBJECT IDENTIFIER ::= { mtEthernet 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet A Channel + +mtEtherRic OBJECT IDENTIFIER ::= { mtEthernet 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet Ric Based MIMs + +mtEtherEPIM OBJECT IDENTIFIER ::= { mtEthernet 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet EPIMs + +mtEtherStandAlone OBJECT IDENTIFIER ::= { mtEthernet 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet Standalone Devices + +mtUMMAC22E OBJECT IDENTIFIER ::= { mtEtherStandAlone 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10BT RF45 with 1 EPIM & 1 BRIM + +mtUMMAC32E OBJECT IDENTIFIER ::= { mtEtherStandAlone 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10BT 1 50 Pin with 2 EPIMs and 1 BRIM + +mtUMMAC24E OBJECT IDENTIFIER ::= { mtEtherStandAlone 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port 10BT 24 RJ45 with 1 EPIM & BRIM + +mtUMMAC34E OBJECT IDENTIFIER ::= { mtEtherStandAlone 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port 10BT 2x50 Pin with 2 EPIMs and BRIMs + +mtSEH22 OBJECT IDENTIFIER ::= { mtEtherStandAlone 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10BT RJ45 with 1 EPIM Non-Intel + +mtSEH32 OBJECT IDENTIFIER ::= { mtEtherStandAlone 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10BT 1x50 Pin with 1 EPIM Non-Intel + +mtSEH24 OBJECT IDENTIFIER ::= { mtEtherStandAlone 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port 10BT RJ45 with 2 EPIM Non-Intel + +mtSEH34 OBJECT IDENTIFIER ::= { mtEtherStandAlone 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port 10BT 2x50 Pin with 2 EPIMs Non-Intel + +mtNBR620 OBJECT IDENTIFIER ::= { mtEtherStandAlone 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone EMM-E6 + +mtSEHi22 OBJECT IDENTIFIER ::= { mtEtherStandAlone 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Ethernet HUB Intelligent with 12 RJ45s and 1 EPIM + +mtSEHi24 OBJECT IDENTIFIER ::= { mtEtherStandAlone 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Ethernet HUB Intelligent with 24 RJ45s and 2 EPIMs + +mtSEHi26FB OBJECT IDENTIFIER ::= { mtEtherStandAlone 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 6 port 10Base-FB + +mtSEHi22FB OBJECT IDENTIFIER ::= { mtEtherStandAlone 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port 10Base-FB + +mtSEHi32 OBJECT IDENTIFIER ::= { mtEtherStandAlone 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Ethernet HUB Intelligent with 1 50 Pin Telco and 1 EPIM + +mtSEHi34 OBJECT IDENTIFIER ::= { mtEtherStandAlone 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Ethernet HUB Intelligent with 22 50 Pin Telcos and 2 EPIMs + +mtSEH26C OBJECT IDENTIFIER ::= { mtEtherStandAlone 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 6 Port 10Base-2 with 1 EPIM + +mtSEH22C OBJECT IDENTIFIER ::= { mtEtherStandAlone 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10Base-2 with 1 EPIM + +mtSEH26FL OBJECT IDENTIFIER ::= { mtEtherStandAlone 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 6 Port 10Base-FL with 1 EPIM + +mtSEH22FL OBJECT IDENTIFIER ::= { mtEtherStandAlone 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10Base-FL with 1 EPIM + +mtUMMAC26FL OBJECT IDENTIFIER ::= { mtEtherStandAlone 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 6 Port 10Base-FL with 1 EPIM + +mtUMMAC22FL OBJECT IDENTIFIER ::= { mtEtherStandAlone 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port 10Base-FL with 1 EPIM + +mtNBR220 OBJECT IDENTIFIER ::= { mtEtherStandAlone 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 Port Bridge with EPIMs + +mtNBR420 OBJECT IDENTIFIER ::= { mtEtherStandAlone 23 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 Port Bridge with EPIMs and 2 BRIMs + +mtSEH22S OBJECT IDENTIFIER ::= { mtEtherStandAlone 24 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 12 Port 10BT RJ45 with 1 EPIM Non-Intel + +mtSEH32S OBJECT IDENTIFIER ::= { mtEtherStandAlone 25 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 12 Port 10BT 1x50 Pin with 1 EPIM Non-Intel + +mtSEH24S OBJECT IDENTIFIER ::= { mtEtherStandAlone 26 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 24 Port 10BT RJ45 with 2 EPIM Non-Intel + +mtSEH34S OBJECT IDENTIFIER ::= { mtEtherStandAlone 27 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 24 Port 10BT 2x50 Pin with 2 EPIMs Non-Intel + +mtSEH26FBS OBJECT IDENTIFIER ::= { mtEtherStandAlone 28 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 6 port 10Base-FB + +mtSEH22FBS OBJECT IDENTIFIER ::= { mtEtherStandAlone 29 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 12 port 10Base-FB + +mtSEH26CS OBJECT IDENTIFIER ::= { mtEtherStandAlone 30 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 6 Port 10Base-2 with 1 EPIM + +mtSEH22CS OBJECT IDENTIFIER ::= { mtEtherStandAlone 31 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 12 Port 10Base-2 with 1 EPIM + +mtSEH26FLS OBJECT IDENTIFIER ::= { mtEtherStandAlone 32 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 6 Port 10Base-FL with 1 EPIM + +mtSEH22FLS OBJECT IDENTIFIER ::= { mtEtherStandAlone 33 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 12 Port 10Base-FL with 1 EPIM + +mtSEHi22S OBJECT IDENTIFIER ::= { mtEtherStandAlone 34 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Secure Ethernet HUB Intelligent with 12 RJ45s and 1 EPIM + +mtSEHi24S OBJECT IDENTIFIER ::= { mtEtherStandAlone 35 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable secure Ethernet HUB Intelligent with 24 RJ45s and 2 EPIMs + +mtSEHi32S OBJECT IDENTIFIER ::= { mtEtherStandAlone 36 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Secure Ethernet HUB Intelligent with 1 50 Pin Telco +-- and 1 EPIM + +mtSEHi34S OBJECT IDENTIFIER ::= { mtEtherStandAlone 37 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Secure Ethernet HUB Intelligent with 22 50 Pin Telcos +-- and 2 EPIMs + +mtUMMAC22ES OBJECT IDENTIFIER ::= { mtEtherStandAlone 38 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 12 Port 10BT RF45 with 1 EPIM & 1 BRIM + +mtUMMAC32ES OBJECT IDENTIFIER ::= { mtEtherStandAlone 39 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 12 Port 10BT 1 50 Pin with 2 EPIMs and 1 BRIM + +mtUMMAC24ES OBJECT IDENTIFIER ::= { mtEtherStandAlone 40 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 24 Port 10BT 24 RJ45 with 1 EPIM & BRIM + +mtUMMAC34ES OBJECT IDENTIFIER ::= { mtEtherStandAlone 41 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Secure 24 Port 10BT 2x50 Pin with 2 EPIMs and BRIMs + +mtUMMAC22UCSs OBJECT IDENTIFIER ::= { mtEtherStandAlone 42 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MicroMMAC-22E Secure with Micro-CS. + +mtUMMAC22EUCS OBJECT IDENTIFIER ::= { mtEtherStandAlone 43 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MicroMMAC-22E with Micro-CS. + +mtUMMAC22UCSsSnac OBJECT IDENTIFIER ::= { mtEtherStandAlone 44 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MicroMMAC-22E secure with Micro-SNAC. + +mtUMMAC22EUCSSnac OBJECT IDENTIFIER ::= { mtEtherStandAlone 45 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MicroMMAC-22E with Micro-SNAC. + +mtUMMAC22EBrics OBJECT IDENTIFIER ::= { mtEtherStandAlone 46 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MicroMMAC-22E with Xylogics Brics adapter which has 3 ISDN +-- terminal adapters. + +mtUMMAC22ESBrics OBJECT IDENTIFIER ::= { mtEtherStandAlone 47 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MicroMMAC-22E secure with Xylogics Brics adapter which has +-- 3 ISDN terminal adapters. + +mtESX1320 OBJECT IDENTIFIER ::= { mtEtherStandAlone 48 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone ethernet switch with 12 RJ45 ports and 1 Brim +-- connector. + +mtESX1380 OBJECT IDENTIFIER ::= { mtEtherStandAlone 49 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone ethernet switch with 12 ST fiber optic ports +-- and 1 Brim connector. + +mtSEHi22FLS OBJECT IDENTIFIER ::= { mtEtherStandAlone 50 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Secure Ethernet HUB Intelligent with 6 10Base-FL ports +-- and 1 EPIM + +mtSEHi26FLS OBJECT IDENTIFIER ::= { mtEtherStandAlone 51 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Secure Ethernet HUB Intelligent with 12 10Base-FL ports +-- and 1 EPIM + +mtSEHi22FL OBJECT IDENTIFIER ::= { mtEtherStandAlone 52 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Ethernet HUB Intelligent with 6 10Base-FL ports +-- and 1 EPIM + +mtSEHi26FL OBJECT IDENTIFIER ::= { mtEtherStandAlone 53 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Ethernet HUB Intelligent with 12 10Base-FL ports +-- and 1 EPIM + +mtSEH100Tx22 OBJECT IDENTIFIER ::= { mtEtherStandAlone 54 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Fast Ethernet class I non-intelligent repeater. +-- With 22 100BaseTX (RJ45) ports with one EPIM slot. + +mtSEHi100Tx22 OBJECT IDENTIFIER ::= { mtEtherStandAlone 55 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Stackable Fast Ethernet class I Intelligent repeater. +-- With 22 100BaseTX (RJ45) ports with one EPIM slot. + +mt8H02p16 OBJECT IDENTIFIER ::= { mtEtherStandAlone 56 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone ethernet switch module supporting 14 front +-- panel RJ45 connectors, and two optional FE-100XX +-- modules. + +mt2E42p27 OBJECT IDENTIFIER ::= { mtEtherStandAlone 57 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone ethernet SmartSwitch with 24 front panel +-- RJ45 ports, 2 FE-100XX slots and one HSIM (High +-- Speed Interface Module) slot. + +mt2E42p27R OBJECT IDENTIFIER ::= { mtEtherStandAlone 58 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone ethernet SmartSwitch with 24 front panel +-- RJ45 ports, 2 FE-100XX slots and one HSIM (High +-- Speed Interface Module) slot. With redundant power supplies. + +mt2E43p27 OBJECT IDENTIFIER ::= { mtEtherStandAlone 59 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone ethernet SmartSwitch with 24 front panel +-- RJ21 ports, 2 FE-100XX slots and one HSIM (High Speed +-- Interface Module) slot. + +mt2E43p27R OBJECT IDENTIFIER ::= { mtEtherStandAlone 60 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone ethernet SmartSwitch with 24 front panel +-- RJ21 ports, 2 FE-100XX slots and one HSIM (High Speed +-- Interface Module) slot. This will have redunant power +-- supplies. + +mt2E43p51 OBJECT IDENTIFIER ::= { mtEtherStandAlone 61 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone chassis with 4 12-port repeated segments, +-- 2 fast ethernet FEPIM ports and 1 HSIM port. + +mt2E43p51R OBJECT IDENTIFIER ::= { mtEtherStandAlone 62 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone chassis with 4 12-port repeated segments, +-- 2 fast ethernet FEPIM ports and 1 HSIM port. This +-- will have redundant power supplies. + +mt2H43p51 OBJECT IDENTIFIER ::= { mtEtherStandAlone 63 } +-- OBJECT-IDENTITY +-- Status +-- deprecated +-- Descr +-- Standalone chassis with 4 10Mbs segments of up to 12 repeated ports, +-- 4 100Mbs segments of up to 12 repeated ports, two FE-PIM slots and +-- an HSIM slot. Each repeated port is autosensing, as to the +-- connection speed, so within each 12 port group there can be a mixture +-- of 10Mbs and 100Mbs. + +mt2H43p51R OBJECT IDENTIFIER ::= { mtEtherStandAlone 64 } +-- OBJECT-IDENTITY +-- Status +-- deprecated +-- Descr +-- Standalone chassis with 4 10Mbs segments of up to 12 repeated ports, +-- 4 100Mbs segments of up to 12 repeated ports, two FE-PIM slots and +-- an HSIM slot. Each repeated port is autosensing, as to the +-- connection speed, so within each 12 port group there can be a mixture +-- of 10Mbs and 100Mbs. This will have redundant power supplies. + +mt2E42p27RDC OBJECT IDENTIFIER ::= { mtEtherStandAlone 65 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone ethernet SmartSwitch with 24 front panel +-- RJ45 ports, 2 FE-100XX slots and one HSIM (High Speed +-- Interface Module) slot. Redundant DC power supplies. + +mt2E42p27DC OBJECT IDENTIFIER ::= { mtEtherStandAlone 66 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone ethernet SmartSwitch with 24 front panel +-- RJ45 ports, 2 FE-100XX slots and one HSIM (High Speed +-- Interface Module) slot. Distributed Chassis version. + +mt2M46p04 OBJECT IDENTIFIER ::= { mtEtherStandAlone 67 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 2200 with 2 HSIM slots and 2 Fast Ethernet +-- ports (uses FEPIMs) + +mt2E48p27R OBJECT IDENTIFIER ::= { mtEtherStandAlone 68 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Redundant powered Standalone SmartSwitch with 24 Multimode fiber +-- 10Base-FL switch ports (via ST connectors) with one optional HSIM +-- port and two optional FE-PIM ports. + +mt2E48p27 OBJECT IDENTIFIER ::= { mtEtherStandAlone 69 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone SmartSwitch with 24 Multimode fiber 10Base-FL +-- switch ports (via ST connectors) with one optional HSIM port and +-- two optional FE-PIM ports. + +mt2E49p27 OBJECT IDENTIFIER ::= { mtEtherStandAlone 70 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone SmartSwitch with 24 fixed single-mode fiber 10Mb +-- switched ports (via ST connectors) with one optional HSIM port and +-- two optional 100BaseX FE-PIM ports. + +mt2E49p27R OBJECT IDENTIFIER ::= { mtEtherStandAlone 71 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Redundant powered Standalone SmartSwitch with 24 fixed single-mode +-- fiber 10Mb switched ports (via ST connectors) with one optional +-- HSIM port and two optional 100BaseX FE-PIM ports. + +mt2E49p27RDC OBJECT IDENTIFIER ::= { mtEtherStandAlone 72 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Redundant powered Standalone SmartSwitch with 24 fixed single-mode +-- fiber 10Mb switched ports (via ST connectors) with one optional +-- HSIM port and two optional 100BaseX FE-PIM ports. Distributed +-- Chassis version. + +mt2M46p04R OBJECT IDENTIFIER ::= { mtEtherStandAlone 73 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 2200 with 2 HSIM slots and 2 Fast Ethernet +-- ports (uses FEPIMs), and redundant power. + +mt2M46p04RDC OBJECT IDENTIFIER ::= { mtEtherStandAlone 74 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 2200 with 2 HSIM slots and 2 Fast Ethernet +-- ports (uses FEPIMs), and DC redundant power. + +mt2H28p08R OBJECT IDENTIFIER ::= { mtEtherStandAlone 75 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Redundant powered standalone SmartSwitch with 6 fixed +-- multi-mode fiber 100BaseF switched ports (via SC onnectors) and +-- 2 optional FE100-XX ports. + +mt2H22p08R OBJECT IDENTIFIER ::= { mtEtherStandAlone 76 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Redundant powered standalone SmartSwitch with 6 fixed +-- RJ45 10BaseT/100BaseTX switched ports (via SC connectors) and +-- 2 optional FE100-XX ports. + +mt2H23p50R OBJECT IDENTIFIER ::= { mtEtherStandAlone 77 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 48 port MicroLAN Standalone (4 RJ21 connectors) with two +-- optional FE-PIM slots. Redundant power supplies. + +mt2H33p37R OBJECT IDENTIFIER ::= { mtEtherStandAlone 78 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 36 port MicroLAN Standalone (3 RJ21 connectors) with one +-- optional HSIM slot. Redundant power supplies. + +mt2H252p25 OBJECT IDENTIFIER ::= { mtEtherStandAlone 79 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port Standalone workgroup Smartswitch with 24 10/100 Switch +-- ports and one optional VHSIM slot. + +mt2H252p25R OBJECT IDENTIFIER ::= { mtEtherStandAlone 80 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port Standalone workgroup Smartswitch with 24 10/100 Switch +-- ports and one optional VHSIM slot. Redundant power supplies. + +mt2M256p04R OBJECT IDENTIFIER ::= { mtEtherStandAlone 81 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 2200 with 2 VHSIM/HSIM slots and 2 Fast Ethernet +-- ports (uses FEPIMs). Redundant power supplies. + +mt2E253p49R OBJECT IDENTIFIER ::= { mtEtherStandAlone 82 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 2200 with 48 10 Meg ports with 1 optional VHSIM +-- slot. Redundant power supplies. + +mt2H258p17R OBJECT IDENTIFIER ::= { mtEtherStandAlone 83 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 2200 with 16 Multimode fiber 100BaseFX switched +-- ports (MT RJ connectors) with 1 optional VHSIM +-- slot. Redundant power supplies. + +mt2H253p25R OBJECT IDENTIFIER ::= { mtEtherStandAlone 84 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 2200 with 24 10/100 BaseTX switched ports +-- (Telco RJ21 connector) with 1 optional VHSIM +-- slot. Redundant power supplies. + +mt2H252p25RDC OBJECT IDENTIFIER ::= { mtEtherStandAlone 85 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port Standalone workgroup Smartswitch with 24 10/100 Switch +-- ports and one optional VHSIM slot. Redundant DC power supplies. + +mt2H259p17R OBJECT IDENTIFIER ::= { mtEtherStandAlone 86 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 2200 with 16 Singlemode fiber 100BaseFX switched +-- ports (MT RJ connectors) with 1 optional VHSIM +-- slot. Redundant power supplies. + +mtELS10082F2 OBJECT IDENTIFIER ::= { mtEtherStandAlone 87 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 8 RJ45 10/100 ports with 2 MultiMode +-- MTRJ Fiber ports. + +-- mtELS1008TX OBJECT IDENTIFIER ::= { mtEtherStandAlone 88 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 8 RJ45 10/100 ports with no uplink. + +-- mtELS10081F2 OBJECT IDENTIFIER ::= { mtEtherStandAlone 89 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 8 RJ45 10/100 ports with 1 MultiMode +-- MTRJ Fiber ports. + +-- mtELS10081F3 OBJECT IDENTIFIER ::= { mtEtherStandAlone 90 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 8 RJ45 10/100 ports with 1 SingleMode +-- MTRJ Fiber ports. + +-- mtELS10082F3 OBJECT IDENTIFIER ::= { mtEtherStandAlone 91 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 8 RJ45 10/100 ports with two SingleMode +-- MTRJ Fiber ports. + +mtELS10024TX2M OBJECT IDENTIFIER ::= { mtEtherStandAlone 92 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 24 RJ45 10/100 ports with two expansion +-- slots. + +mtELS10024FX2M OBJECT IDENTIFIER ::= { mtEtherStandAlone 93 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 24 MTRJ Multimode ports with two expansion +-- slots. + +mtELS10048TX2M OBJECT IDENTIFIER ::= { mtEtherStandAlone 94 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 48 RJ45 10/100 ports with two expansion +-- slots. + +mtELS10008SX1M OBJECT IDENTIFIER ::= { mtEtherStandAlone 95 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 8 1000 Base SX ports with one expansion +-- slot. + +mtELS100012SX2M OBJECT IDENTIFIER ::= { mtEtherStandAlone 96 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 12 1000 Base SX ports with two expansion +-- slots. + +mtELS10016FXG OBJECT IDENTIFIER ::= { mtEtherStandAlone 97 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 16 port MTRJ Multimode fiber and 2 Modular +-- Gigabit uplinks. + +mtELS100024TX2MA OBJECT IDENTIFIER ::= { mtEtherStandAlone 98 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 24 RJ45 10/100 Fast Ethernet ports with two expansion +-- modules. + +mtELS10024TX1M OBJECT IDENTIFIER ::= { mtEtherStandAlone 99 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartStack with 24 RJ45 10/100 Ethernet ports with 1 modular slot that +-- can accept 2 or 4 port 100BaseFX module or 2 GBIC port module. + +etherSlot1 OBJECT IDENTIFIER ::= { mtEthernet 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet First Slot Devices + +mtEMME6 OBJECT IDENTIFIER ::= { etherSlot1 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- EMME with 2 BRIM Ports + +mtEnetBrim OBJECT IDENTIFIER ::= { mtEthernet 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet BRIMs + +mtBrimUnk OBJECT IDENTIFIER ::= { mtEnetBrim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Unknown ethernet BRIM type. + +mtBrimE6 OBJECT IDENTIFIER ::= { mtEnetBrim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet BRIM with 1 EPIM port + +mt100MBEnet OBJECT IDENTIFIER ::= { mtEthernet 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100 Mega Bit Ethernet products. + +mtBrimE100 OBJECT IDENTIFIER ::= { mt100MBEnet 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A 100 MB Ethernet BRIM with single EPIM, accepting +-- FE100xx modules. + +mtmmacEthernetSmartSwitch OBJECT IDENTIFIER ::= { mtEthernet 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC Ethernet SmartSwitch products branch + +mtSmartMIM216 OBJECT IDENTIFIER ::= { mtmmacEthernetSmartSwitch 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A SmartSwitch MIM with 14 10Base-T ports and two FE-100 +-- PIM slots. + +mtEnetHSIM OBJECT IDENTIFIER ::= { mtEthernet 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC Ethernet HSIMs + +mtHSIMpG01 OBJECT IDENTIFIER ::= { mtEnetHSIM 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 port Gigabit Ethernet High Speed Interface Module (SmartSwitch +-- product). The 1000Base-SX interface on the front panel uses an SC +-- connector supporting multimode fiber. The laser is an 850 nanometer +-- optical laser. + +mtHSIMpG09 OBJECT IDENTIFIER ::= { mtEnetHSIM 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 port Gigabit Ethernet High Speed Interface Module (SmartSwitch +-- product). The 1000Base-LX interface on the front panel uses an SC +-- connector supporting Single or multi-mode fiber. The laser is a +-- 1300 nanometer optical laser. + +mtHSIMFE6 OBJECT IDENTIFIER ::= { mtEnetHSIM 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port Fast Ethernet High Speed Interface Module (SmartSwitch +-- product with 2 FEPIM connectors. + +mtVHSIMG6 OBJECT IDENTIFIER ::= { mtEnetHSIM 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port Gigabit Ethernet Very High Speed Interface Module (SmartSwitch +-- product) with 2 GPIM (hot-swappable) connectors. + +mtEnetRepeater OBJECT IDENTIFIER ::= { mtExpanded 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet repeater MIMs. + +mtEnetABC OBJECT IDENTIFIER ::= { mtEnetRepeater 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet MIMs resident on A or B or C. + +mtTPXMIM20 OBJECT IDENTIFIER ::= { mtEnetABC 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 9 RJ45s 10Base-T with one EPIM + +mtTPXMIM22 OBJECT IDENTIFIER ::= { mtEnetABC 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 21 RJ45s 10Base-T with one EPIM + +mtTPXMIM33 OBJECT IDENTIFIER ::= { mtEnetABC 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- One 50 pin telco 10Base-T with one EPIM + +mtTPXMIM34 OBJECT IDENTIFIER ::= { mtEnetABC 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Two 50 pin telcos 10Base-T with one EPIM + +mtTpxmim20S OBJECT IDENTIFIER ::= { mtEnetABC 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 9 RJ45s 10Base-T with one EPIM all ports support +-- LANVIEW/SECURE. + +mtTpxmim22S OBJECT IDENTIFIER ::= { mtEnetABC 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 21 RJ45s 10Base-T with one EPIM all ports +-- support LANVIEW/SECURE. + +mtTpxmim33S OBJECT IDENTIFIER ::= { mtEnetABC 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 50 PIN Telcos 10Base-T with EPIM all ports +-- support LANVIEW/SECURE. + +mtTpxmim34S OBJECT IDENTIFIER ::= { mtEnetABC 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 50 PIN Telcos 10Base-T with EPIM all ports +-- support LANVIEW/SECURE. + +mtTokenRing OBJECT IDENTIFIER ::= { mtExpanded 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Token Ring Product branch + +mtTRActive OBJECT IDENTIFIER ::= { mtTokenRing 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fiber based active token ring MIMs + +mtTRMIM22A OBJECT IDENTIFIER ::= { mtTRActive 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Active MIM with 12 UTP ports with ring out. + +mtTRMIM24A OBJECT IDENTIFIER ::= { mtTRActive 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Active MIM with 24 UTP ports with ring out. + +mtTRMIM42A OBJECT IDENTIFIER ::= { mtTRActive 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Active MIM with 12 STP ports with ring out. + +mtTRMIM44A OBJECT IDENTIFIER ::= { mtTRActive 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Active MIM with 24 STP ports with ring out. + +mtTRFMIM32 OBJECT IDENTIFIER ::= { mtTRActive 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port with ST single mode fiber. + +mtTRFMIM36 OBJECT IDENTIFIER ::= { mtTRActive 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 6 port with ST single mode fiber. + +mtTRFMIM38 OBJECT IDENTIFIER ::= { mtTRActive 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 18 port with ST single mode fiber. + +mtTRRepeater OBJECT IDENTIFIER ::= { mtTokenRing 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtTRRMIMf2t OBJECT IDENTIFIER ::= { mtTRRepeater 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- repeater with 6 multimode stations and TPIMs for Ring-In/Ring-Out + +mtTRRMIMf3t OBJECT IDENTIFIER ::= { mtTRRepeater 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- repeater with 6 singlemode stations and TPIMs for Ring-In/Ring-Out + +mtTRRMIMat OBJECT IDENTIFIER ::= { mtTRRepeater 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- repeater with no stations and TPIM Ring-In/Ring-Out + +mtTRRMIM2at OBJECT IDENTIFIER ::= { mtTRRepeater 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- repeater with 12 active UTP stations and TPIM Ring-In/Ring-Out + +mtTRRMIM4at OBJECT IDENTIFIER ::= { mtTRRepeater 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring repeater with 12 active STP stations and TPIM +-- Ring-in/Ring-out. + +mtTPIM OBJECT IDENTIFIER ::= { mtTokenRing 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring TPIMs + +mtTPIMUnk OBJECT IDENTIFIER ::= { mtTPIM 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Unknown TPIM + +mtTPIMT1 OBJECT IDENTIFIER ::= { mtTPIM 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM STP with DB9 connection + +mtTPIMF2 OBJECT IDENTIFIER ::= { mtTPIM 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM with ST multimode connectors + +mtTPIMT4 OBJECT IDENTIFIER ::= { mtTPIM 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM with STP RJ45 connector + +mtTPIMT2 OBJECT IDENTIFIER ::= { mtTPIM 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM with UTP RJ45 + +mtTPIMF3 OBJECT IDENTIFIER ::= { mtTPIM 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- TPIM with single mode fiber, ST connectors + +mtTRBrim OBJECT IDENTIFIER ::= { mtTokenRing 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring BRIMs + +mtBrimT6 OBJECT IDENTIFIER ::= { mtTRBrim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring BRIM supports TPIM + +mtTRStandAlone OBJECT IDENTIFIER ::= { mtTokenRing 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring Standalone Devices + +mtTSX1620 OBJECT IDENTIFIER ::= { mtTRStandAlone 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring Standalone switch with 8 base ports and optional +-- extension module. + +mtTrxi24 OBJECT IDENTIFIER ::= { mtTRStandAlone 48 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 passive UTP ports. + +mtTrxi22 OBJECT IDENTIFIER ::= { mtTRStandAlone 49 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Passive UTP Ports + +mtTrxi24A OBJECT IDENTIFIER ::= { mtTRStandAlone 50 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 active UTP ports. + +mtTrxi22A OBJECT IDENTIFIER ::= { mtTRStandAlone 51 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Active UTP Ports + +mtTrxi44 OBJECT IDENTIFIER ::= { mtTRStandAlone 56 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 passive STP ports. + +mtTrxi42 OBJECT IDENTIFIER ::= { mtTRStandAlone 57 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Passive STP Ports + +mtTrxi44A OBJECT IDENTIFIER ::= { mtTRStandAlone 58 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 active STP ports. + +mtTrxi42A OBJECT IDENTIFIER ::= { mtTRStandAlone 59 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Active STP Ports + +mtTRManagement OBJECT IDENTIFIER ::= { mtTokenRing 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtTRMMIM4at OBJECT IDENTIFIER ::= { mtTRManagement 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring with 12 STP active stations with TPIMs +-- for ring in and ring out. + +mtTRMMIM2at OBJECT IDENTIFIER ::= { mtTRManagement 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring with 12 UTP active stations with TPIMs +-- for ring in and ring out. + +mtTRMMIMF2t OBJECT IDENTIFIER ::= { mtTRManagement 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring with 6 MMF station ports with TPIMs +-- for ring in and ring out. + +mtTRMMIMF3t OBJECT IDENTIFIER ::= { mtTRManagement 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring with 5 SMF station ports with TPIMs +-- for ring in and ring out. + +mtTBRMIM OBJECT IDENTIFIER ::= { mtTRManagement 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 4 port Token Ring Bridge/Routing MIM with 1 BRIM port. + +mtSTH OBJECT IDENTIFIER ::= { mtTokenRing 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Reserved for Steve Zinch and STH products + +mtSTH22A OBJECT IDENTIFIER ::= { mtSTH 248 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port UTP Active + +mtSTH24A OBJECT IDENTIFIER ::= { mtSTH 136 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port UTP Active + +mtSTH42A OBJECT IDENTIFIER ::= { mtSTH 244 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port STP Active + +mtSTH44A OBJECT IDENTIFIER ::= { mtSTH 68 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port UTP Active + +mtSTHI OBJECT IDENTIFIER ::= { mtTokenRing 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Reserved for Steve Zinch and STH products + +mtSTHI22A OBJECT IDENTIFIER ::= { mtSTHI 248 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port UTP Active with intelligence + +mtSTHI24A OBJECT IDENTIFIER ::= { mtSTHI 136 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port UTP Active with intelligence + +mtSTHI42A OBJECT IDENTIFIER ::= { mtSTHI 244 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port STP Active with intelligence + +mtSTHI44A OBJECT IDENTIFIER ::= { mtSTHI 68 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port STP Active with intellgence + +mtUMMAC OBJECT IDENTIFIER ::= { mtTokenRing 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MicroMMAC + +mtUMMAC22T OBJECT IDENTIFIER ::= { mtUMMAC 248 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port UTP Active with intelligence + +mtUMMAC24T OBJECT IDENTIFIER ::= { mtUMMAC 136 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port UTP Active with intelligence + +mtUMMAC42T OBJECT IDENTIFIER ::= { mtUMMAC 244 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port STP Active with intellgence + +mtUMMAC44T OBJECT IDENTIFIER ::= { mtUMMAC 68 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port STP Active with intellgence + +mtTRPortSwitch OBJECT IDENTIFIER ::= { mtTokenRing 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The DIABLO ASIC based Token Ring Port Switch modules. + +mtTRXMIM22A OBJECT IDENTIFIER ::= { mtTRPortSwitch 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Port assignment with 12 RJ45 UTP station ports. + +mtTRXMIM24A OBJECT IDENTIFIER ::= { mtTRPortSwitch 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Port assignment with 24 RJ45 UTP station ports. + +mtTRXMIM42A OBJECT IDENTIFIER ::= { mtTRPortSwitch 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Port assignment with 12 RJ45 STP station ports. + +mtTRXMIM44A OBJECT IDENTIFIER ::= { mtTRPortSwitch 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Port assignment with 24 RJ45 STP station ports. + +mtTRXMIM54A OBJECT IDENTIFIER ::= { mtTRPortSwitch 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Port assignment with 24 RJ45 UTP/STP station ports. + +mtTDRMIM22A OBJECT IDENTIFIER ::= { mtTRPortSwitch 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual port ring in/ring out with 12 active UTP lobe +-- ports on daughter board. + +mtTDRMIM42A OBJECT IDENTIFIER ::= { mtTRPortSwitch 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual port ring in/ring out with 12 active STP lobe +-- ports on daughter board. + +mtCrm2RT OBJECT IDENTIFIER ::= { mtTRPortSwitch 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco Token Ring BRIM on a mother MIM. + +mtTDRMIMAT OBJECT IDENTIFIER ::= { mtTRPortSwitch 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual port ring in/ring out with 12 active UTP/STP lobe +-- ports on daughter board. + +mtFDDI OBJECT IDENTIFIER ::= { mtExpanded 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The FDDI product branch + +mtFDDIconcFIBER OBJECT IDENTIFIER ::= { mtFDDI 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrators fiber. + +mtFDDIconcTWISTED OBJECT IDENTIFIER ::= { mtFDDI 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrators twisted pair. + +mtFDCMIM12 OBJECT IDENTIFIER ::= { mtFDDIconcTWISTED 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrator with 12 STP DB9 M ports. + +mtFDCMIM22 OBJECT IDENTIFIER ::= { mtFDDIconcTWISTED 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrator with 12 UTP M ports. + +mtFDCMIM42 OBJECT IDENTIFIER ::= { mtFDDIconcTWISTED 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrator with 12 STP RJ45 M ports. + +mtFDCMIM16 OBJECT IDENTIFIER ::= { mtFDDIconcTWISTED 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrator with 6 STP DB9 M ports. + +mtFDCMIM26 OBJECT IDENTIFIER ::= { mtFDDIconcTWISTED 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrator with 12 STP DB9 M ports. + +mtFDCMIM46 OBJECT IDENTIFIER ::= { mtFDDIconcTWISTED 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrator with 6 STP RJ45 M ports. + +mtFDCMIM44 OBJECT IDENTIFIER ::= { mtFDDIconcTWISTED 24 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrator with 4 STP M ports. + +mtFDCMIM48 OBJECT IDENTIFIER ::= { mtFDDIconcTWISTED 25 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI concentrator with 8 UTP M ports. + +mtFDDImanagement OBJECT IDENTIFIER ::= { mtFDDI 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtFDMMIM24mmf OBJECT IDENTIFIER ::= { mtFDDImanagement 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI to Ethernet Bridge/Management MIM MMF A/B and 4 UTP M +-- ports + +mtFddiBrim OBJECT IDENTIFIER ::= { mtFDDI 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI BRIMs + +mtBrimFD0 OBJECT IDENTIFIER ::= { mtFddiBrim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A/B ports, Multimode MIC connectors. + +mtBrimFD6 OBJECT IDENTIFIER ::= { mtFddiBrim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A/B ports, FPIM slots. + +mtBrimFD5 OBJECT IDENTIFIER ::= { mtFddiBrim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A/B ports, Singlemode MIC connectors. + +mtFddiHsim OBJECT IDENTIFIER ::= { mtFDDI 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI HSIMs + +mtFddiHsimF6 OBJECT IDENTIFIER ::= { mtFddiHsim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI High Speed Interface Module which supports +-- two FPIMs. + +mtWan OBJECT IDENTIFIER ::= { mtExpanded 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WAN Products using 3 registers + +mtWanBrim OBJECT IDENTIFIER ::= { mtWan 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WAN BRIMs + +mtBrimWT1 OBJECT IDENTIFIER ::= { mtWanBrim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WAN BRIM for MicroMMAC + +mtBrimW6 OBJECT IDENTIFIER ::= { mtWanBrim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- WAN BRIM for Generic BRIMs + +mtBrimWB4 OBJECT IDENTIFIER ::= { mtWanBrim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Virtual Router for MMAC with four ISDN BRI ports. +-- Supports TCP/IP and optionally IPX, Frame Relay and X.25. +-- A Serial port is used for local managagement. Supports +-- ML-PPP and compression. + +mtWanCyberSwitch OBJECT IDENTIFIER ::= { mtWan 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- branch for CyberSwitches + +mtWanCyberSwitch200 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN switch which supports VLAN and SFS, with 12 +-- repeated Ethernet RJ-45 ports, a single WPIM, and an +-- optional compression/encryption internal daughter card. + +mtWanCyberSwitch300 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN switch which supports VLAN and SFS, with 24 +-- repeated Ethernet RJ-45 ports, a stackable connector, +-- a single WPIM, an asynchronous interface, an ISDN +-- BRI S/T interface and an optional compression/encryption +-- internal daughter card. + +mtWanCyberSwitch400 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN switch which supports VLAN and SFS, with 2 switched +-- Ethernet WPIM ports, 2 WPIMs and 2 optional compression/encryption +-- internal daughter cards. + +mtWanCyberSwitch150 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router with dual POTS ports and a single ISDN BRI port. +-- Supports TCP/IP and optionally IPX. A Serial port is used for local +-- managagement as well as an Asynch-PPP interface. Supports ML-PPP and +-- compression. + +mtWanCyberSwitch1200 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router with four ISDN BRI ports or a single PRI port. +-- Supports TCP/IP and optionally IPX, Frame Relay and X.25. A Serial port +-- is used for local managagement. Supports ML-PPP and compression. + +mtWanCyberSwitch6000 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router with 8 slots to accomodate multiple WAN +-- technologies. Up to 24 ISDN BRI ports or 6 PRI ports, Digital +-- Modem, V.35 and Dedicated Lines. Supports TCP/IP and optionally +-- IPX, Frame Relay and X.25. Supports ML-PPP and compression. Single +-- or dual port Ethernet capability. + +mtWanCyberSwitch7000 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router with 16 slots to accomodate multiple WAN +-- technologies. Up to 48 ISDN BRI ports or 12 PRI ports, Digital +-- Modem, V.35 and Dedicated Lines. Supports TCP/IP and optionally +-- IPX, Frame Relay and X.25. Supports ML-PPP and compression. Single +-- or dual port Ethernet capability. + +mtWanCyberSwitch5500 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router with 6 slots to accomodate multiple WAN +-- technologies. Up to 16 ISDN BRI ports or 4 PRI ports, Digital +-- Modem, V.35 and Dedicated Lines. Supports TCP/IP and optionally +-- IPX, Frame Relay and X.25. Supports ML-PPP and compression. Single +-- or dual port Ethernet capability. + +mtWanCyberSwitch9W000p00 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router module for the MMAC-Plus product with 2 slots +-- to accommodate up to 4 WAN cards for ISDN and Digital Modem access. +-- TCP/IP, IPX, and AppleTalk protocols supported, and optionally +-- FrameRelay and X.25. Supports ML-PPP and compression. Dual port +-- Ethernet capability. + +mtWanCyberSwitch9W426p420 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual slot MMAC-Plus module with INB-2 connectivity. The front panel +-- has 2 slots for HSIMs-W65's. + +mtWanCyberSwitch9W427p420 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual slot MMAC-Plus module with INB-2 connectivity. The front panel +-- has 2 slots for HSIMs-W75's. + +mtWanCyberSwitchNE1000 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- LAN/WAN Bridge/Router with up to four ISDN BRI ports. +-- Supports TCP/IP and optionally IPX, Frame Relay and X.25. A Serial +-- port is used for local managagement. Supports ML-PPP and +-- compression. + +mtWanCyberSwitchPOTS OBJECT IDENTIFIER ::= { mtWanCyberSwitch 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch Plain Old Telephone adapter for CSX150. +-- Provides 2 RJ-11 connections. + +mtWanCyberSwitchNTp1 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch Network Terminator adapter for CSX150. +-- Converts the RJ-45 connector to ISDN U Basic Rate connectivity. + +mtWanCyberSwitchBRI1 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch WAN module with 1 RJ45 port and ISDN S/T Basic Rate +-- connectivity. + +mtWanCyberSwitchBRI4 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch WAN module with 4 RJ45 ports and ISDN S/T Basic Rate +-- connectivity. + +mtWanCyberSwitchPRI8 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch WAN module with 1 RJ45 port and ISDN S/T Primary Rate +-- connectivity. Provides 8 Kbps "B" channels. + +mtWanCyberSwitchPRI23 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch WAN module with 1 RJ45 port and ISDN S/T Primary Rate +-- connectivity. Provides 23 to 30 Kbps "B" channels. + +mtWanCyberSwitchEXP OBJECT IDENTIFIER ::= { mtWanCyberSwitch 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch WAN expansion module with no ports and provides +-- only PRI8 channel expansion up to 23 or 30 Kbps "B" channels. + +mtWanCyberSwitchRS232 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch Serial module with 4 DB56 ports and dedicated line +-- connectivity. + +mtWanCyberSwitchV35 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch Serial module with 2 DB26 ports and dedicated line +-- connectivity. + +mtWanCyberSwitchDIG OBJECT IDENTIFIER ::= { mtWanCyberSwitch 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch Digital Modem module with 8 V.34+ 33.6 Kbps modems +-- Supports Async-PPP. + +mtWanCyberSwitchDIG24 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 23 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch Digital Modem module with 24 V.34+ 33.6 Kbps modems +-- Supports Async-PPP. + +mtWanCyberSwitchDIG24Plus OBJECT IDENTIFIER ::= { mtWanCyberSwitch 24 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch Digital Modem module with 24 V.34+ 56 Kbps modems +-- Supports Async-PPP. + +mtWanCyberSwitchDIG30Plus OBJECT IDENTIFIER ::= { mtWanCyberSwitch 25 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch Digital Modem module with 30 V.34+ 56 Kbps modems +-- Supports Async-PPP. + +mtWanCyberSwitchAUI1 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 26 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch AUI/Ethernet Port Interface Module Supporting a +-- single Ethernet segment. + +mtWanCyberSwitchAUI2 OBJECT IDENTIFIER ::= { mtWanCyberSwitch 27 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CyberSwitch AUI/Ethernet Port Interface Module Supporting two +-- Ethernet segments. + +mtWanThirdParty OBJECT IDENTIFIER ::= { mtWan 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- branch for WAN third party products + +tpWanCyberSwitch100 OBJECT IDENTIFIER ::= { mtWanThirdParty 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- an Ethernet to ISDN device which supports Transparent +-- Bridging and IP/IPX routing. + +mtWanHsim OBJECT IDENTIFIER ::= { mtWan 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- branch for WAN HSIMs + +mtWanHsimW6 OBJECT IDENTIFIER ::= { mtWanHsim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtWanHsimW84 OBJECT IDENTIFIER ::= { mtWanHsim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtWanHsimW87 OBJECT IDENTIFIER ::= { mtWanHsim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A wan hsim with a physical T3 interface +-- providing 28 logical T1 connections. + + +mtWanHsimWB4 OBJECT IDENTIFIER ::= { mtWanHsim 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +mtWanHsimSSA710 OBJECT IDENTIFIER ::= { mtWanHsim 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A WAN dial access HSIM with a single fixed RJ-48C +-- ISDN PRI (T1) interface and a second wpim interface. +-- Supports 24 ports V.90 digital modems. + +mtWanHsimSSA720 OBJECT IDENTIFIER ::= { mtWanHsim 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A WAN dial access HSIM with a single fixed RJ-48C ISDN +-- PRI (E1) interface and a wpim interface. Supports 24 +-- ports V.90 digital modems. + +mtWanHsimWD1 OBJECT IDENTIFIER ::= { mtWanHsim 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A wan hsim which supports Voice over IP and +-- comes configured with a T1 WPIM with an +-- additional wpim slot. + +mtWanHsimW85 OBJECT IDENTIFIER ::= { mtWanHsim 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A wan hsim with 8 physical T1 interfaces + +mtWanHsimSSA710p48 OBJECT IDENTIFIER ::= { mtWanHsim 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A WAN dial access HSIM with a single fixed RJ-48C +-- ISDN PRI (T1) interface and a second PRI interface. +-- Supports 48 ports V.90 digital modems. + +mtWanHsimSSA720p60 OBJECT IDENTIFIER ::= { mtWanHsim 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A WAN dial access HSIM with a single fixed RJ-48C ISDN +-- PRI (E1) interface and a second PRI interface. Supports 60 +-- ports V.90 digital modems. + +mtWanCMM OBJECT IDENTIFIER ::= { mtWan 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Branch for Multi-Modem Modules + +mtWanCMM824 OBJECT IDENTIFIER ::= { mtWanCMM 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode modem with 3 modules of 8 modems for +-- a total of 24 modems + +mtWanCMM3248 OBJECT IDENTIFIER ::= { mtWanCMM 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode modem with 2 modules of 24 modems for a total of 48 modems. + +mtWanCMM3264 OBJECT IDENTIFIER ::= { mtWanCMM 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode modem with 2 modules of 32 modems for a total of 64 modems. + +mtWanCMM3224 OBJECT IDENTIFIER ::= { mtWanCMM 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode modem with 1 module of 24 modems. + +mtWanCMM3232 OBJECT IDENTIFIER ::= { mtWanCMM 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Multimode modem with 1 module of 32 modems. + +mtWanAccess OBJECT IDENTIFIER ::= { mtWan 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Branch for Access Servers + +mtAS316 OBJECT IDENTIFIER ::= { mtWanAccess 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- StandAlone Access Server with 16 async ports and one +-- Ethernet port. + +mtSSA710p48 OBJECT IDENTIFIER ::= { mtWanAccess 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Wan dial access stackable with a fixed RJ-48C ISDN PRI +-- (T1) inteface, a wpim-RT1 PRI interface and a 10Base-T +-- interface with an RJ-45 connector. This supports 48 +-- ports of V.90 digital modems. + +mtSSA720p60 OBJECT IDENTIFIER ::= { mtWanAccess 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Wan dial access stackable with a fixed RJ-48C ISDN PRI +-- (E1) inteface, a wpim-RE1 PRI interface and a 10Base-T +-- interface with an RJ-45 connector. This supports 60 +-- ports of V.90 digital modems. + +mtATM OBJECT IDENTIFIER ::= { mtExpanded 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Reserved for ATM products + +mtAtmBrim OBJECT IDENTIFIER ::= { mtATM 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM BRIMs + +mtBrimA100 OBJECT IDENTIFIER ::= { mtAtmBrim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 100 Meg with MIC connector + +mtBrimA6 OBJECT IDENTIFIER ::= { mtAtmBrim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM Bridge Router Interface Module with one ATM Port +-- Interface Module (APIM). + +mtBrimA6DP OBJECT IDENTIFIER ::= { mtAtmBrim 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM Bridge Router Interface module with 2 APIM connectors, +-- one of which is redundent. + +mtAtmHsim OBJECT IDENTIFIER ::= { mtATM 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM HSIMs + +mtAtmHsimA6DP OBJECT IDENTIFIER ::= { mtAtmHsim 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM High Speed Interface Module which supports +-- two (redundant) APIMs. + +mtAtmVHsimA6DP OBJECT IDENTIFIER ::= { mtAtmHsim 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM Very High Speed Interface Module which supports +-- two (redundant) APIMs + +mtAtmStandAlone OBJECT IDENTIFIER ::= { mtATM 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM Standalone devices (switches) + +mt2A000 OBJECT IDENTIFIER ::= { mtAtmStandAlone 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SS2500 ATM Switch w/ 2.5Gbps switch fabric and +-- four network module slots. + +mt2A000R OBJECT IDENTIFIER ::= { mtAtmStandAlone 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SS2500 ATM Switch w/ 2.5Gbps switch fabric and +-- four network module slots. Redundant power supplies. + +mtAtmNetworkModule OBJECT IDENTIFIER ::= { mtATM 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch defines Network Modules cards that are +-- specific to the 2500/6500 architecture + +mtIOM21p04 OBJECT IDENTIFIER ::= { mtAtmNetworkModule 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A network module with 4 MMF SC connectors at 155 Mbps + +mtIOM22p04 OBJECT IDENTIFIER ::= { mtAtmNetworkModule 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A network module with 4 Cat 5 UTP with RJ45 +-- connectors at 155 Mbps + +mtIOM29p04IR OBJECT IDENTIFIER ::= { mtAtmNetworkModule 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A network module with 4 ports 1 SMF IR (intermediate reach) +-- SC port at 155 Mbps and 3 MMF SC connectors at 155 Mbps + +mtIOM29p04LR OBJECT IDENTIFIER ::= { mtAtmNetworkModule 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A network module with 4 ports 1 SMF LR (long reach) +-- SC port at 155 Mbps and 3 MMF SC connectors at 155 Mbps + +mtIOM31p01 OBJECT IDENTIFIER ::= { mtAtmNetworkModule 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A network module with a single port OC12 (622 Mbps) MMF +-- with an SC connector + +mtIOM39p01 OBJECT IDENTIFIER ::= { mtAtmNetworkModule 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A network module with a single port OC12 (622 Mbps) SMF +-- with an SC connector + +mtIOM39p01LR OBJECT IDENTIFIER ::= { mtAtmNetworkModule 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A network module with a single port OC12 (622 Mbps) SMF +-- long reach with an SC connector + +mtIOM67p04 OBJECT IDENTIFIER ::= { mtAtmNetworkModule 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A T3 (45 Mbps) network module with four BNC connectors. + +mtIOM77p04 OBJECT IDENTIFIER ::= { mtAtmNetworkModule 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An E3 (34 Mbps) network module with 4 BNC connectors. + + +mtFPS OBJECT IDENTIFIER ::= { mtExpanded 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch is reserved for FPS modules that are +-- not directly related to either MMAC or MMAC plus products. +-- These may exist in an MMAC or MMAC plus chassis but be +-- unknown to that chassis. They may also exist in their +-- own standalone chassis. + +mtFPSModules OBJECT IDENTIFIER ::= { mtFPS 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch is used to identify all FPS modules. +-- In this instance a module may be a module which resides +-- in another chassis but allows other stand alone modules to +-- be plugged into it. It may also be a true stand alone +-- chassis. It may also be a management module. + +mt7C03 OBJECT IDENTIFIER ::= { mtFPSModules 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Two Slot MMAC module providing enclosure providing +-- three slots for NIB modules. This module is visible +-- within an MMAC chassis but not managable. + +mt7C04 OBJECT IDENTIFIER ::= { mtFPSModules 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone NIB enclosures having 4 slots. + +mt7X00 OBJECT IDENTIFIER ::= { mtFPSModules 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FPS and Management Module for FPSMIM and MMACFPS. +-- Provides two user configurable COM Ports. + +mt7C04r OBJECT IDENTIFIER ::= { mtFPSModules 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Standalone NIB enclosures having 4 slots, and redundent +-- power capability. + +mtFpsEthernet OBJECT IDENTIFIER ::= { mtFPS 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch is reserved for FPS ethernet products. + +mt7E03p24 OBJECT IDENTIFIER ::= { mtFpsEthernet 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port Ethernet Module for FPSMIM and MMAC FPS using +-- telco connectors. + +mt7E02p12 OBJECT IDENTIFIER ::= { mtFpsEthernet 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port ethernet module for FPSMIM and MMAC FPS using +-- RJ45 connectors. + +mt7E02p24 OBJECT IDENTIFIER ::= { mtFpsEthernet 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port ethernet wide slot module for FPSMIM and MMAC FPS using +-- RJ45 connectors. + +mt7E08p12 OBJECT IDENTIFIER ::= { mtFpsEthernet 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 Port ethernet wide slot module for FPSMIM and MMAC FPS using +-- fiber connectors. + +mtFpsFDDI OBJECT IDENTIFIER ::= { mtFPS 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch is reserved for FPS FDDI products. + +mt7F06p02 OBJECT IDENTIFIER ::= { mtFpsFDDI 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 Port FDDI module for FPSMIM and MMAC FPS using 4 +-- (2 per FDDI port) FPIMs. + +mtFpsTR OBJECT IDENTIFIER ::= { mtFPS 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch is reserved for FPS Token Ring products. + +mt7T05p04 OBJECT IDENTIFIER ::= { mtFpsTR 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 4 Port Token Ring module for FPSMIM and MMAC FPS using +-- RJ45 connectors and supporting UTP/STP. + + +mtFpsATM OBJECT IDENTIFIER ::= { mtFPS 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch identifies ATM FPS products. + +mt7A06p01 OBJECT IDENTIFIER ::= { mtFpsATM 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single port ATM access module for FPSMIM and MMACFPS +-- with two redundant APIMs. + +mtFpsFastEthernet OBJECT IDENTIFIER ::= { mtFPS 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch identifies FPS Fast Ethernet products. + +mt7H02p06 OBJECT IDENTIFIER ::= { mtFpsFastEthernet 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 6 port fast ethernet module for FPSMIM and MMACFPS +-- with 5 RJ45 connectors and 1 FEPIM slot. + +mt7H02p12 OBJECT IDENTIFIER ::= { mtFpsFastEthernet 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 12 port fast ethernet wide slot module for FPSMIM +-- in 7C04-R with 11 RJ45 connectors and 1 FEPIM slot. + +mt7H06p2 OBJECT IDENTIFIER ::= { mtFpsFastEthernet 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port fast ethernet single slot module for FPSMIM +-- with 2 FEPIM slots. + +mtCableModem OBJECT IDENTIFIER ::= { mtExpanded 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A line of products which bridge between the network media +-- technologies and CATV. + +mtEthernetCableModem OBJECT IDENTIFIER ::= { mtCableModem 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CableModems which bridge between ethernet and CATV. + +mtMC23001pXE21 OBJECT IDENTIFIER ::= { mtEthernetCableModem 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CableModem for Head End with 2 ports and an EPIM. + +mtMC21001pE01 OBJECT IDENTIFIER ::= { mtEthernetCableModem 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- CableModem for Customer Premise with 2 ports and an EPIM. + +mtWorkGroup OBJECT IDENTIFIER ::= { mtExpanded 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Work Group product line + +mtWorkGroupChassis OBJECT IDENTIFIER ::= { mtWorkGroup 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Work Group product line chassis. + +mt6C105 OBJECT IDENTIFIER ::= { mtWorkGroupChassis 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 5 Slot Work Group chassis + +mt6C110 OBJECT IDENTIFIER ::= { mtWorkGroupChassis 2} +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Desc +-- 10 Slot Work Group Chassis with ATM backplane + + +mtSmartSwitchRouter8 OBJECT IDENTIFIER ::= { mtWorkGroupChassis 3} +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Desc +-- 8 Slot Work Group Chassis (SSR8000) + +mtSmartSwitchRouter16 OBJECT IDENTIFIER ::= { mtWorkGroupChassis 4} +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Desc +-- 16 Slot Work Group Chassis (SSR16000) + +mtSmartSwitchRouter32 OBJECT IDENTIFIER ::= { mtWorkGroupChassis 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Desc +-- 32 Slot Work Group Chassis (SSR32000) + +mt6C107 OBJECT IDENTIFIER ::= { mtWorkGroupChassis 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 7 Slot SmartSwitch 6700 Chassis. + +mtWorkGroupEthernet OBJECT IDENTIFIER ::= { mtWorkGroup 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Work Group Ethernet Module. + +mt6E102p24 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 port SmartSwitch for the 6C105 chassis. Supports 24 +-- 10Base-T switch ports. + +mt6E122p26 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Port SmartSwitch module for the 6C105 chassis. Supports +-- 24 10Base-T switch ports and two FE-100XX PIMs. + +mt6E132p25 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Port SmartSwitch module for the 6C105 chassis. Supports +-- 24 10Base-T switch ports and one HSIM port + +mt6H122p08 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A SmartSwitch module for the 6C105 chassis. Supports 8 Fast +-- Ethernet switch ports, 6 being dedicated RJ45s, and two optional +-- FE-PIM ports. + +mt6E123p50 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A microlan module with 4 12-port repeated segments and 2 Fast +-- Ethernet FEPIM ports for the 6C105 chassis. + +mt6E133p49 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A microlan module with 4 12-port repeated segments and 1 HSIM +-- port for the 6C105 chassis. + +mt6E123p26 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Port SmartSwitch module for the 6C105 chassis. Supports +-- 24 telco connector ports and two FE-100XX PIMs. + +mt6E133p25 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Port SmartSwitch module for the 6C105 chassis. Supports +-- 24 telco connector ports and one HSIM port. + +mt6H133p49 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 9 } +-- OBJECT-IDENTITY +-- Status +-- deprecated +-- Descr +-- MicroLAN module with 4 10Mbs segments of up to 12 repeated ports, +-- 4 100Mbs segments of up to 12 repeated ports, and an HSIM slot. +-- Each repeated port is autosensing, as to the connection speed, so +-- within each 12 port group there can be a mixture of 10Mbs and 100Mbs. + +mt6H123p50 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MicroLAN module with 4 10Mbs segments of up to 12 repeated ports, +-- 4 100Mbs segments of up to 12 repeated ports, and two FE-PIM slots. +-- Each repeated port is autosensing, as to the connection speed, so +-- within each 12 port group there can be a mixture of 10Mbs and 100Mbs. + +mt6M146p04 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 2 HSIM slots and 2 Fast Ethernet +-- ports (uses FEPIMs) + +mt6E128p26 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 24 Multimode fiber 10Base-FL Switch +-- ports (via ST connectors) with two optional FE-PIM ports. + +mt6E138p25 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 24 Multimode fiber 10Base-FL Switch +-- ports (via ST connectors) with one optional HSIM slot. + +mt6E129p26 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 24 single-mode fiber 10Mb switched +-- ports (via ST connectors) with two optional FE-PIM ports. + +mt6E139p25 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 24 single-mode fiber 10Mb switched +-- ports (via ST connectors) with one optional HSIM slot. + +mt6H128p08 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 6 fixed Multi-mode fiber +-- 100BaseFX Switched ports (via SC connectors) and two optional +-- FE-PIM ports. + +mt6H129p08 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 6 fixed Single-mode fiber +-- 100BaseFX Switched ports (via SC connectors) and two optional +-- FE-PIM ports. + +mt6H122p16 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 16 RJ45 ports. + +mt6H133p37 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 36 port MicroLAN module (3 RJ21 connectors) with an +-- optional HSIM slot. + +mt6H202p24 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 24 10/100 Switch ports. + +mt6H252p17 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 16 10/100 Switch ports +-- and one optional VHSIM slot. + +mt6M256p04 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 2 VHSIM/HSIM slots and 2 Fast +-- Ethernet ports (uses FEPIMs) + +mt6E233p49 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 23 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 48 10 Meg ports and an optional +-- HSIM slot. + +mt6H258p17 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 24 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 16 Multimode fiber 100BaseFX +-- switched ports (MT RJ connectors) with one optional +-- VHSIM slot. + +mt6H203p24 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 25 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 24 10/100 BaseTX ports +-- (telco RJ21 connector). + +mt6H253p13 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 26 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 12 10/100 BaseTX ports +-- (telco RJ21 connector) with one optional VHSIM slot. + +mt6H259p17 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 27 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 16 single mode 100 BaseFX +-- ports with one optional VHSIM slot. + +mt6H262p18 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 28 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 16 10/100 BaseTx ports (RJ45 +-- connectors) with two optional GPIM slots. + +mt6H202p48 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 29 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 48 100 BaseTx ports (RJ45 +-- connectors). + +mt6E253p49 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 30 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 48 10 BaseTx ports (telco RJ21 +-- connector) with one optional VHSIM/HSIM slot. + +mt6H203p48 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 31 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 46 10/100 BaseTx ports (telco RJ21 +-- connector) with two optional VHSIM/HSIM slots. + +mt6H303p48 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 32 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 48 ports (telco RJ21 connector). + +mt6H302p48 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 33 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 48 ports (telco RJ45 connector). + +mt6H352p25 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 34 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 24 ports (RJ45 connector) and one optional +-- VHSIM slot. + +mt6G306p06 OBJECT IDENTIFIER ::= { mtWorkGroupEthernet 35 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A second generation Giga bit module with 6 GBIC ports. + +mtWorkGroupATM OBJECT IDENTIFIER ::= { mtWorkGroup 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Work Group ATM Module. + +mt6A000 OBJECT IDENTIFIER ::= { mtWorkGroupATM 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 4 IOM slots and +-- 2.5 Gbps switching capabilities (6500 chassis). + +mt6A000F OBJECT IDENTIFIER ::= { mtWorkGroupATM 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitch 6000 module with 4 IOM slots and +-- 2.5 Gbps switching capabilities (6500 chassis). + +mtMMACPlus OBJECT IDENTIFIER ::= { mtExpanded 32 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC Plus module type naming tree. + +mtMMACPlusEnclose OBJECT IDENTIFIER ::= { mtMMACPlus 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC Plus style enclosures. + +mt9C114 OBJECT IDENTIFIER ::= { mtMMACPlusEnclose 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The 14 slot MMAC plus enclosure. + +mt9C106 OBJECT IDENTIFIER ::= { mtMMACPlusEnclose 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The 6 slot MMAC plus enclosure. + +mtMMACEM OBJECT IDENTIFIER ::= { mtMMACPlus 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Environmental modules for the MMAC plus. + +mt9C300p01 OBJECT IDENTIFIER ::= { mtMMACEM 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- EM with 4X40 LCD display, EPIM and 2 com ports for the +-- 14 slot chassis. + +mt9C306p01 OBJECT IDENTIFIER ::= { mtMMACEM 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- System Manager with EPIM and 2 com ports for the +-- 6 slot MMAC plus chassis. + +mtMMACPU OBJECT IDENTIFIER ::= { mtMMACPlus 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC Plus DC and AC power supplies and battery units. + +mt9C214p1 OBJECT IDENTIFIER ::= { mtMMACPU 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- AC Power supply with 100 - 240 volt input. + +mt9C214p2 OBJECT IDENTIFIER ::= { mtMMACPU 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- DC Power supply with -40 volt to 60 volt input. + +mt9C206p1 OBJECT IDENTIFIER ::= { mtMMACPU 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1000 watt AC Power supply for the MMAC plus 6 slot chassis. + +mt9C214p3 OBJECT IDENTIFIER ::= { mtMMACPU 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2000W AC Power supply for MMAC-Plus. + +mtMMACPlusFNBSingle OBJECT IDENTIFIER ::= { mtMMACPlus 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Modules with Flexible network bus connectivity. + +mt9E133p36 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet with 36 ports on 3 50 pin Telcos. + +mt9E122p24 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet with 24 RJ45 ports. + +mt9E138p36 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 2 slot module with 36 fiber optic ST ports. + +mt9F116p01 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI 2 port bridge with DAS front panel. + +mt9F106p02 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI repeater module with 2 sets aof A/B ports using +-- FPIMs. + +mt9W116p04 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Wan module with 4 WPIMs with 2 i960 processors. + +mt9T122p24 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring module with 24 port UTP bridge/router. + +mt9E132p15 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet module with 3 networks each network having +-- 1 EPIM and 4 RJ45 connectors. + +mt9T122p08 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token ring module with 2 segments, each segment having +-- 2 TPIMs for Ring-in/Ring-out and 4 RJ45 lobes. + +mt9A128p01 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM to FDDI bridge, with single ATM connection on +-- front panel and single FNB backplane connection. + +mt9E106p06 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI-FNB to 6 EPIM port bridge. + +mt9E138p12 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet bridge with 12 fiber optic ports. + +mt9F206p02 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI repeater module with 4 FPIMs to extend FNB-1 and FNB-2 +-- backplanes. + +mt9A126p01 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM to FDDI bridge/router/switch module. Having 2 APIM +-- connectors one of which is redundent. + +mt9T112p24 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single 24 port token ring attached to the FDDI-FNB. + +mt9T162p06 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring switch module with 6 RJ45 ports and FDDI-FNB +-- connectivity. + +mt9T125p08 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring MicroLAN Extension FNB module with 8 RJ-45 port +-- UTP/STP and 4 TPIMs RI/RO bridge/switch. + +mt9T125p24 OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring MicroLAN FNB module with 24 RJ-45 port UTP/STP +-- bridge/switch. + +mt9E132p15s OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet module, supporting LanviewSecure, with 3 networks each +-- network having 1 EPIM and 4 RJ45 connectors. + +mt9E133p36s OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet module, supporting LanviewSecure, with 36 ports +-- on 3 50 pin Telcos. + +mt9E138p36s OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 2 slot module, supporting LanviewSecure, +-- with 36 fiber optic ST ports. + +mt9E138p12s OBJECT IDENTIFIER ::= { mtMMACPlusFNBSingle 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet module, supporting LanviewSecure, with +-- 12 fiber optic ports. + +mtMMACPlusFNBDual OBJECT IDENTIFIER ::= { mtMMACPlus 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC Plus modules with Dual FNB connections. + +mt9F122p12 OBJECT IDENTIFIER ::= { mtMMACPlusFNBDual 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI dual attached concentrator with 12 ports. + +mt9F120p08 OBJECT IDENTIFIER ::= { mtMMACPlusFNBDual 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI dual attached Concentrator with 8 master ports +-- with mm MIC connectors. + +mt9F125p08 OBJECT IDENTIFIER ::= { mtMMACPlusFNBDual 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI dual attached Concentrator with 8 master ports +-- with single mode fiber MIC connectors. + +mt9F241P12 OBJECT IDENTIFIER ::= { mtMMACPlusFNBDual 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI dual attached concentrator with 12 multi mode +-- fiber SC connectors. + +mt9F240p08 OBJECT IDENTIFIER ::= { mtMMACPlusFNBDual 5 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI dual attached concentrator with 8 master ports with mm +-- MIC connectors, multi-mode, 2 FDDI Macs and 2 FDDI bandwidth +-- utilization chips. + +mtMMACPlusINBSingle OBJECT IDENTIFIER ::= { mtMMACPlus 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC plus modules with a single INB connection. + +mt9E312p12 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 12 port bridge/switch modules with RJ45 +-- connectors. + +mt9E313p12 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 12 port bridge/switch with one 50 pin +-- connector. + +mt9E318p12 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet bridge/switch with 12 ST multi-mode +-- fiber optic ports. + +mt9F310p02 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI 2 port switching module with FNB connectivity +-- and 2 sets of front panel Multi-mode fiber ports. + +mt9A426p02 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM Bridge/Switch module with FNB, INB2 backplane +-- connectivity and two front panel APIMs. + +mt9F315p02 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI 2 port switching module with FNB connectivity +-- and 2 sets of front panel single mode fiber ports. + +mt9F426p2 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI 2 port switching module with FNB and INB +-- connectivity and 4 FPIMs. + +mt9E423p24 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 24 port bridge/switch module with INB +-- connectivity with 2 telco front panel connectors. + +mt9H422p12 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fast Ethernet 12 port bridge/switch module with INB +-- connectivity. 11 RJ45 100BaseTX ports and one FEPIM. +-- slot. + +mt9E428p12 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 12 port bridge/switch module with INB connectivity. +-- 12 front panel MMF ST style connectors. + +mt9E428p36 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 36 port bridge/switch dual module with INB connectivity. +-- 36 front panel MMF ST style connectors. + +mt9E429p12 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 12 port bridge/switch module with INB connectivity. +-- 12 front panel SMF ST style connectors. + +mt9E429p36 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 36 port bridge/switch dual module with INB connectivity. +-- 36 front panel SMF ST style connectors. + +mt9F426p03 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- FDDI 3 port bridge/switch module with INB connectivity. +-- The 3 front panel ports can support a total of 6 FPIMs. + +mt9H421p12 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fast Ethernet 12 port switch module with INB-2 connectivity. +-- 12 ports of 100FX SC connector multimode fiber. + +mt9E423p36 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 16 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Ethernet 36 port bridge/switch module with INB +-- connectivity with 3 telco front panel connectors. + +mt9H429p12 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 17 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fast Ethernet 12 port switch module with INB-2 connectivity. +-- 12 ports of 100FX SC connector single mode fiber. + +mt9T425p16 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 18 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring 16 RJ-45 port bridge/switch dual slot module with +-- INB2 connectivity. + +mt9T425p24 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 19 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Token Ring 24 RJ-45 port bridge/switch single slot module with +-- INB2 connectivity. + +mt9A426p01 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 20 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM Uplink module with INB2 and FNB connectivity and two +-- front panel APIMs utilizing APIM redundancy. + +mt9G426p02 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 21 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 Gigabit single slot module with INB2 connectivity and +-- interfaces for two front panel GPIMs. + +mt9H423p28 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 22 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 28 port ethernet bridge/switch module with INB connectivity. +-- Consisting of 24 10 MB ethernet ports, via 2 telco front panel +-- connectors, and 4 100 MB ethernet ports via 2 fixed RJ-45, +-- 1 fixed MMF and 1 FEpim. + +mt9H423p26 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 23 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Fast Ethernet MMAC-Plus Module with INB-2 connectivity. +-- Consisting of 24 ports via 2 RJ21 Connectors, and 2 ports +-- via 2 MMF SC Connectors. This is a single slot module. + +mt9G421p02 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 24 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port Gigabit Ethernet INB-B MMAC-PLUS module (SmartSwitch Plus product) +-- It uses two interfaces on the front panel that connect via MultiMode +-- Fiber. + +mt9M426p02 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 25 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual slot module with INB-2 connectivity. The front panel consists +-- of two HSIMs. + +mt9D422p16 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 26 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual slot MMAC-PLUS INB module (ATU-C) with 16 ADSL ports (DMT). + +mt9G429p02 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 27 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port Gigabit Ethernet INB-B MMAC-PLUS module (SmartSwitch Plus +-- product). It uses two interfaces on the front panel that connect via +-- Single mode or multimode Fiber. The laser is a 1300 nanometer optical +-- laser. + +mt9T428p16 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 28 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual slot, 16-port multi-mode fiber with ST connectors. +-- TR Smartswitch module. + +mt9T427p16 OBJECT IDENTIFIER ::= { mtMMACPlusINBSingle 29 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single slot, 16-port multi-mode fiber with RJ-45 connectors. +-- TR Smartswitch module. This connects to the INB-2 Backplane + + +mt3PartyFnbSingle OBJECT IDENTIFIER ::= { mtMMACPlus 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Third party MMAC+ modules with Single FDDI-FNB. + +mt9W111p08 OBJECT IDENTIFIER ::= { mt3PartyFnbSingle 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco 4T router with 8 synchronus serial wan ports. With +-- single FDDI-FNB connection and SMB-1. In MMAC+ chassis. + +mt9T101p04 OBJECT IDENTIFIER ::= { mt3PartyFnbSingle 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco 4500 router with 4 DB9 Token Ring ports. With single +-- FDDI-FNB connection in MMAC+ chassis. + +mt9F106p01 OBJECT IDENTIFIER ::= { mt3PartyFnbSingle 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco 4500 router with a FDDI DAS MIC connector on the front +-- pannel. With single FDDI-FNB connection in MMAC+ chassis. + +mt9F206p01 OBJECT IDENTIFIER ::= { mt3PartyFnbSingle 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco 4700 router with a FDDI DAS MIC connector on the +-- front panel. With single FDDI-FNB connection in MMAC+ +-- chassis. + +mt9T201p04 OBJECT IDENTIFIER ::= { mt3PartyFnbSingle 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco 4700 router with 4 DB9 Token Ring ports. +-- With single FDDI-FNB connection in MMAC+ chassis. + +mt9W211p08 OBJECT IDENTIFIER ::= { mt3PartyFnbSingle 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco 4700 router with 8 synchronous serial WAN ports. +-- With single FDDI-FNB connection and SMB-1 in MMAC+ chassis. + +mt9A221p01 OBJECT IDENTIFIER ::= { mt3PartyFnbSingle 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco 4700 router with 1 SC MM fiber OC-3 ATM front panel +-- port. With single FDDI-FNB connection in MMAC+ chassis. + +-- mt3PartyFnbSingle 8-13 are currently reserved for future +-- modules + +mt9A222p01 OBJECT IDENTIFIER ::= { mt3PartyFnbSingle 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco 4700 router with 1 UTP OC-3 ATM front panel +-- port. With single FDDI-FNB connection in MMAC+ chassis. + +mt9A229p01 OBJECT IDENTIFIER ::= { mt3PartyFnbSingle 15 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Cisco 4700 router with 1 SC SM fiber OC-3 ATM front panel +-- port. With single FDDI-FNB connection in MMAC+ chassis. + +mtMMACPOther OBJECT IDENTIFIER ::= { mtMMACPlus 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch defines other MMAC plus modules. This includes +-- but is not limited to modules that draw power only and +-- personal computer modules. + +mt9A000 OBJECT IDENTIFIER ::= { mtMMACPOther 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC-Plus LAN ATM Switch manufactured by Fore Systems +-- w/ 2.5Gbps switch fabric and four network module slots. + +mt9P120 OBJECT IDENTIFIER ::= { mtMMACPOther 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A personal computer module for the MMAC plus chassis +-- based off from a sparc 5 processor. + +mt9P110 OBJECT IDENTIFIER ::= { mtMMACPOther 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A personal computer module for the MMAC plus chassis +-- based off from the Intel 486 DX/2 66 MHz processor. + +mt9X000p16 OBJECT IDENTIFIER ::= { mtMMACPOther 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Xylogics T1 communication server with 16 integrated modems + +mt9P110mhz90 OBJECT IDENTIFIER ::= { mtMMACPOther 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A personal computer module for the MMAC plus chassis +-- based off from the Intel 486 DX/2 90 MHz processor. + +mt9A656p04 OBJECT IDENTIFIER ::= { mtMMACPOther 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC-Plus single slot 5 Gbps ATM Switch with 4 +-- ANIM slots and CTM connectivity. + +mt9A600p04 OBJECT IDENTIFIER ::= { mtMMACPOther 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC-Plus single slot 5.4 Gbps ATM Switch with 4 +-- ANIM slots. + +mt9A686p04 OBJECT IDENTIFIER ::= { mtMMACPOther 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC-Plus single slot 5.4 Gbps ATM Switch with 4 +-- ANIM slots and CTM connectivity. + +mt9A100 OBJECT IDENTIFIER ::= { mtMMACPOther 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- MMAC-Plus single slot 2.5 Gbps ATM Switch with 4 +-- Input Network Module (IOM) slots. + +mtMMACPlusNortel OBJECT IDENTIFIER ::= { mtMMACPlus 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch defines Cabletron/Nortel MMAC-Plus products. + +mt9N050 OBJECT IDENTIFIER ::= { mtMMACPlusNortel 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS option module, which consumes six contiguous +-- slots of an MMAC-PLUS chassis. The device provides +-- MMAC-PLUS integration for a maximum of five, off-the-shelf, +-- Northern Telecom Passport Interface modules. + +mtMMACPlusINBDual OBJECT IDENTIFIER ::= { mtMMACPlus 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch defines MMAC-Plus products with dual INB +-- connections. + +mt9H532p18 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS 100Base-TX module which supports 16 RJ45 10/100 +-- ports and two gigabit port interfaces via GPIM's. + +mt9H531p18 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS 100Base-FX module which supports 16 100 Meg MMF +-- ports (mini MTRJ transcievers) and two gigabit port +-- interfaces via GPIM's. + +mt9H539p18 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS 100Base-FX module which supports 16 100 Meg SMF +-- ports (mini MTRJ transcievers) and two gigabit port +-- interfaces via GPIM's. + +mt9H532p17 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS 100Base-TX module which supports 16 10/100 +-- ports and a VHSIM/HSIM slot. + +mt9H531p17 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS 100Base-FX module which supports 16 100 Meg MMF +-- ports (mini MTRJ transcievers) and a VHSIM/HSIM slot. + +mt9H539p17 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS 100Base-FX module which supports 16 100 Meg SMF +-- ports (mini MTRJ transcievers) and a VHSIM/HSIM slot. + +mt9G536p04 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS module which supports four gigabit port +-- interfaces via GPIM's. + +mt9H532p24 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS 100Base-TX module which supports 24 RJ-45 +-- ports each supporting 10/100 BaseT. + +mt9H531p24 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS 100Base-FX module which supports 24 100 Meg MMF +-- ports (mini MTRJ transcievers). + +mt9H539p24 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS 100Base-FX module which supports 24 100 Meg SMF +-- ports (mini MTRJ transcievers). + +mt9M546p04 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- An MMAC-PLUS dual slot module which supports 2 VHSIM/HSIM +-- ports and 2 FEPIM slots. + +mt9H533p24 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A 24 port MMAC-PLUS 10/100Base Ethernet Smartswitch module with +-- dual RJ-21 Telco connectors. + +mt9H533p48 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A 48 port MMAC-PLUS 10/100Base Ethernet Smartswitch module with +-- quad RJ-21 Telco connectors. + +mt9E531p24 OBJECT IDENTIFIER ::= { mtMMACPlusINBDual 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A 38-Special 24 port 10Base-FL Ethernet Smartswitch module with +-- MT-RJ connectors. + +mtSSR OBJECT IDENTIFIER ::= { mtExpanded 33 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Smart Switch Router naming Tree + +mtSSRStandAlone OBJECT IDENTIFIER ::= { mtSSR 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Smart Switch Router StandAlone module naming Tree + +mtSSR2Expansion OBJECT IDENTIFIER ::= { mtSSR 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Smart Switch Router Expansion module naming Tree +-- Modules under this branch are supported by the SSR 2000 +-- series of products. + +mtSSR8Expansion OBJECT IDENTIFIER ::= { mtSSR 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Smart Switch Router Expansion module naming Tree +-- Modules under this branch are supported by the SSR +-- 8000/8600 series of products. + +mtSSR6Expansion OBJECT IDENTIFIER ::= { mtSSR 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Smart Switch Router Expansion module naming Tree +-- Modules under this branch are supported by the SS6000 +-- series of products. + +mtHSIMSSR OBJECT IDENTIFIER ::= { mtSSR 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The Smart Switch Router HSIM module naming Tree +-- Modules under this branch are supported by the SS6000 +-- and SS2000 carrier modules. + + + +mtSSR2SX OBJECT IDENTIFIER ::= { mtSSR2Expansion 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 1000 Base-SX expansion module for SSR 2000 + +mtSSR2LX OBJECT IDENTIFIER ::= { mtSSR2Expansion 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 1000 Base-LX expansion module for SSR 2000 + +mtSSR2TX OBJECT IDENTIFIER ::= { mtSSR2Expansion 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 port 10/100 Base-TX expansion module for SSR 2000 + +mtSSR2FX OBJECT IDENTIFIER ::= { mtSSR2Expansion 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 port 100 Base-FX expansion module for SSR 2000 +-- with MT-RJ connectors. + +mtSSR2SER OBJECT IDENTIFIER ::= { mtSSR2Expansion 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual port serial module for SSR 2000. + +mtSSR2SERC OBJECT IDENTIFIER ::= { mtSSR2Expansion 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual port serial module with compression for SSR 2000. + +mtSSR2SERCE OBJECT IDENTIFIER ::= { mtSSR2Expansion 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual port serial module with compression and encryption +-- for SSR 2000. + + +mtIA1100 OBJECT IDENTIFIER ::= { mtSSR2Expansion 8 } +mtIA1200 OBJECT IDENTIFIER ::= { mtSSR2Expansion 9 } + +mtSSRHTX12p08 OBJECT IDENTIFIER ::= { mtSSR8Expansion 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 port 10/100 Base-TX module for SSR8000/8600 +-- with Cat 5 RJ-45 ports (4 MB of memory). + +mtSSRHTX22p08 OBJECT IDENTIFIER ::= { mtSSR8Expansion 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 port 10/100 Base-TX module for SSR8000/8600 +-- with Cat 5 RJ-45 ports (16 MB of memory). + +mtSSRHFX11p08 OBJECT IDENTIFIER ::= { mtSSR8Expansion 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 port 100 Base-FX module for SSR8000/8600 +-- with MMF SC ports and 4 MB of memory. + +mtSSRHFX21p08 OBJECT IDENTIFIER ::= { mtSSR8Expansion 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 port 100 Base-FX module for SSR8000/8600 +-- with MMF SC ports and 16 MB of memory. + +mtSSRGSX11p02 OBJECT IDENTIFIER ::= { mtSSR8Expansion 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 1000Base-SX module for SSR8000/8600 +-- with SCSX ports (for MMF only) and 4 MB of memory. + +mtSSRGSX21p02 OBJECT IDENTIFIER ::= { mtSSR8Expansion 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 1000Base-SX module for SSR8000/8600 +-- with SCSX (for MMF only) and 16 MB of memory. + +mtSSRGLX19p02 OBJECT IDENTIFIER ::= { mtSSR8Expansion 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 1000Base-LX module for SSR8000/8600 +-- with SCLX ports (for MMF or SMF) and 4 MB of memory. + +mtSSRGLX29p02 OBJECT IDENTIFIER ::= { mtSSR8Expansion 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 1000 Base-LX module for SSR8000/8600 +-- with SCLX ports (for MMF or SMF) and 16 MB of memory. + +mtSSRGLX70p01 OBJECT IDENTIFIER ::= { mtSSR8Expansion 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 1 port 70km 1000 BaseLX Gigabit Ethernet module for SSR8000/8600 +-- with 16MB memory. + +mtSSRHFX29p08 OBJECT IDENTIFIER ::= { mtSSR8Expansion 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 port 1000 Base-FX module for SSR8000/8600 +-- with 16 MB of memory. + +mtSSRSERCp04 OBJECT IDENTIFIER ::= { mtSSR8Expansion 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Quad port serial module with compression for SSR8000/8600 + +mtSSRSERCEp04 OBJECT IDENTIFIER ::= { mtSSR8Expansion 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Quad port serial module with compression and encryption +-- for SSR8000/8600 + +mtSSRHSSIp02 OBJECT IDENTIFIER ::= { mtSSR8Expansion 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual port HSSI module for SSR8000/8600 + +mt6SSRM-02 OBJECT IDENTIFIER ::= { mtSSR6Expansion 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- SmartSwitchRouter module for the 6000 chassis. +-- This module has two expansion slots for line cards. + +mt6SSRLC-LX OBJECT IDENTIFIER ::= { mtSSR6Expansion 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 1000 Base-LX expansion module for 6SSRM-02 module. + +mt6SSRLC-TX OBJECT IDENTIFIER ::= { mtSSR6Expansion 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 port 10/100 Base-TX expansion module for 6SSRM-02 module + +mt6SSRLC-FX OBJECT IDENTIFIER ::= { mtSSR6Expansion 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 port 100 Base-FX expansion module for 6SSRM-02 module +-- with MT-RJ connectors. + +mt6SSRLC-SX OBJECT IDENTIFIER ::= { mtSSR6Expansion 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 2 port 1000 Base-SX expansion module for 6SSRM-02 module + +mt6SSRLC-SER OBJECT IDENTIFIER ::= { mtSSR6Expansion 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Dual port serial module for 6SSRM-02 module. + +mt6SSRLC-SERC OBJECT IDENTIFIER ::= { mtSSR6Expansion 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 4 port serial module with compression for 6SSRM-02 module. + +mt6SSRLC-SERCE OBJECT IDENTIFIER ::= { mtSSR6Expansion 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 4 port serial module with compression and encryption +-- for the 6SSRM-02 module. + +mt6SSRLC-LX70 OBJECT IDENTIFIER ::= { mtSSR6Expansion 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Single port 1000Base-LX (70 km)Line Card for 6SSRM-02 module. + +mtSSR2B OBJECT IDENTIFIER ::= { mtSSRStandAlone 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port 10/100 Base-TX base unit with one expansion +-- slot. Includes SSR Router Services software. + +mtSSR2BPS OBJECT IDENTIFIER ::= { mtSSRStandAlone 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- 24 Port 10/100 Base-TX base unit with one expansion +-- slot. Includes redundant power supply. + +mtSSR2100 OBJECT IDENTIFIER ::= { mtSSRStandAlone 3 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- 8 Port 1000 Base-SX standalone SmartSwitchRouter. + +mtSSR510 OBJECT IDENTIFIER ::= { mtSSRStandAlone 4 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- 3 port standalone SmartSwitchRouter supporting 1 RJ45 10 Base-TX +-- port, 1 T1/E1 synchronous WAN port and one Basic Rate +-- ISDN port. + +mtSSR520 OBJECT IDENTIFIER ::= { mtSSRStandAlone 5 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- 3 port standalone SmartSwitchRouter supporting 1 RJ45 10 Base-TX +-- port and 2 T1/E1 synchronous WAN port. + +mtSSR600S OBJECT IDENTIFIER ::= { mtSSRStandAlone 6 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- A 4 port standalone SmartSwitchRouter supporting 2 RJ45 10/100 Base-TX +-- ports and 2 SWPIM slots. + +mtSSR600D OBJECT IDENTIFIER ::= { mtSSRStandAlone 7 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- A 4 port standalone SmartSwitchRouter supporting 2 RJ45 10/100 Base-TX +-- ports and 2 SWPIM slots. This supports redundant power supplies. + +mtSSR710T1 OBJECT IDENTIFIER ::= { mtSSRStandAlone 8 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- An 8 port standalone SmartSwitchRouter supporting 2 RJ45 10 Base-TX +-- ports, 2 RJ45 Primary Rate ISDN ports and 4 T1 synchronous WAN ports. + + +mtSSR710E1 OBJECT IDENTIFIER ::= { mtSSRStandAlone 9 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- An 8 port standalone SmartSwitchRouter supporting 2 RJ45 10 Base-TX +-- ports, 2 RJ45 Primary Rate ISDN ports and 4 E1 synchronous WAN ports. + +mtSSR720 OBJECT IDENTIFIER ::= { mtSSRStandAlone 10 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- A 10 port standalone SmartSwitchRouter supporting 2 RJ45 10 Base-TX +-- ports and 8 T1/E1 synchronous WAN ports. + + + +mtHSIMSSR600 OBJECT IDENTIFIER ::= { mtHSIMSSR 1 } +-- OBJECT IDENTITY +-- Status +-- mandatory +-- Descr +-- A 3 port HSIM SmartSwitchRouter module supporting 1 RJ45 10/100 Base-TX +-- ports and 2 SWPIM slots. + +ctIfTypes OBJECT IDENTIFIER ::= { namingTree 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctIfBackPlane OBJECT IDENTIFIER ::= { ctIfTypes 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctIfNonFNB OBJECT IDENTIFIER ::= { ctIfBackPlane 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctIfFNB OBJECT IDENTIFIER ::= { ctIfBackPlane 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctIfFrontPanel OBJECT IDENTIFIER ::= { ctIfTypes 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctHsimInterconnect OBJECT IDENTIFIER ::= { ctIfTypes 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctResourceType OBJECT IDENTIFIER ::= { namingTree 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Identifies the different chassis resource types. Notice +-- that these may also identify interface types since devices +-- have interfaces to many of the resources. + +ctFDDIFnbBP OBJECT IDENTIFIER ::= { ctResourceType 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC plus FDDI FNB backplane. + +ctFDDIFnbBP1 OBJECT IDENTIFIER ::= { ctFDDIFnbBP 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC plus FDDI FNB 1 backplane. + +ctFDDIFnbBP2 OBJECT IDENTIFIER ::= { ctFDDIFnbBP 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC plus FDDI FNB 2 backplane. + +ctSMB1 OBJECT IDENTIFIER ::= { ctResourceType 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC plus SMB1 bus. + +ctSMB10 OBJECT IDENTIFIER ::= { ctResourceType 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC plus SMB10 bus. + +-- ctINB OBJECT IDENTIFIER ::= { ctResourceType 4 } +-- OBJECT-IDENTITY +-- Status +-- deprecated +-- Descr +-- The MMAC plus INB bus. + +ctFrontPanel OBJECT IDENTIFIER ::= { ctResourceType 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC plus front panel types. This defines a branch +-- for all front panel types. Note that these types also +-- apply to the MMAC SmartSwitch product line. + +ctINB1 OBJECT IDENTIFIER ::= { ctResourceType 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC plus INB1 bus. + +ctINB2 OBJECT IDENTIFIER ::= { ctResourceType 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC plus INB2 bus. + +ctHostPort OBJECT IDENTIFIER ::= { ctResourceType 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines an MMAC plus host interface type. +-- Note that this type also applies to the MMAC +-- SmartSwitch product line. + +ctCTM OBJECT IDENTIFIER ::= { ctResourceType 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The MMAC plus Cell Transfer Matrix. + +ctWorkGroupBPport OBJECT IDENTIFIER ::= { ctResourceType 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- A branch for the backplane port resource types for the new +-- Work Group chassis. + +ctATMVirtual OBJECT IDENTIFIER ::= { ctResourceType 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- ATM Virtual types. + +ctATMVirtualLec OBJECT IDENTIFIER ::= { ctATMVirtual 1 } +-- Status +-- mandatory +-- Descr +-- Defines this Virtual LAN Emulation Client. + +ctATMVirtualPvc OBJECT IDENTIFIER ::= { ctATMVirtual 2 } +-- Status +-- mandatory +-- Descr +-- Defines this Virtual Permanent Virtual Circuit. + +ctATMVirtualClip OBJECT IDENTIFIER ::= { ctATMVirtual 3 } +-- Status +-- mandatory +-- Descr +-- Defines this Virtual Classic IP Circuit. + +ctATMVirtualSvc OBJECT IDENTIFIER ::= { ctATMVirtual 4 } +-- Status +-- mandatory +-- Descr +-- Defines this Virtual Switched Virtual Circuit. + +ctIfSpecific OBJECT IDENTIFIER ::= { ctResourceType 12 } +-- Status +-- mandatory +-- Descr +-- Returning this value will result in a non-display of the port on all +-- NMS screens. + +ctSmartTrunkVirtual OBJECT IDENTIFIER ::= { ctResourceType 13 } +-- Status +-- mandatory +-- Descr +-- Defines this interface as a Cabletron SmartTrunk (HuntGroup) +-- Virtual Interface. + + +ctMMACPlusBPport OBJECT IDENTIFIER ::= { ctResourceType 14 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- A branch for the backplane port resource types for the + -- MMAC Plus chassis. Initially, the types in this branch are only + -- used for the new 9x5xx-xx boards. + +ctMMACPlusBPport1 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 1 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 1 of the MMAC Plus chassis. + + ctMMACPlusBPport2 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 2 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 2 of the MMAC Plus chassis. + + ctMMACPlusBPport3 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 3 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 3 of the MMAC Plus chassis. + + ctMMACPlusBPport4 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 4 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 4 of the MMAC Plus chassis. + + ctMMACPlusBPport5 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 5 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 5 of the MMAC Plus chassis. + + ctMMACPlusBPport6 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 6 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 6 of the MMAC Plus chassis. + + ctMMACPlusBPport7 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 7 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 7 of the MMAC Plus chassis. + + ctMMACPlusBPport8 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 8 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 8 of the MMAC Plus chassis. + + ctMMACPlusBPport9 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 9 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 9 of the MMAC Plus chassis. + + ctMMACPlusBPport10 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 10 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 10 of the MMAC Plus chassis. + + ctMMACPlusBPport11 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 11 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 11 of the MMAC Plus chassis. + + ctMMACPlusBPport12 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 12 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 12 of the MMAC Plus chassis. + + ctMMACPlusBPport13 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 13 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 13 of the MMAC Plus chassis. + + ctMMACPlusBPport14 OBJECT IDENTIFIER ::= { ctMMACPlusBPport 14 } + -- OBJECT-IDENTITY + -- Status + -- mandatory + -- Descr + -- The resource type for the backplane port connection + -- to slot 14 of the MMAC Plus chassis. + + +ctWorkGroupBPport1 OBJECT IDENTIFIER ::= { ctWorkGroupBPport 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The resource type for the backplane port connection in slot 1 +-- of the new Work Group chassis. + +ctWorkGroupBPport2 OBJECT IDENTIFIER ::= { ctWorkGroupBPport 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The resource type for the backplane port connection in slot +-- 2 of the new Work Group chassis. + +ctWorkGroupBPport3 OBJECT IDENTIFIER ::= { ctWorkGroupBPport 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The resource type for the backplane port connection in slot 3 +-- of the new Work Group chassis. + +ctWorkGroupBPport4 OBJECT IDENTIFIER ::= { ctWorkGroupBPport 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The resource type for the backplane port connection in slot 4 +-- of the new Work Group chassis. + +ctWorkGroupBPport5 OBJECT IDENTIFIER ::= { ctWorkGroupBPport 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- The resource type for the backplane port connection in slot 5 +-- of the new Work Group chassis. + +ctFDDIFrontPanel OBJECT IDENTIFIER ::= { ctFrontPanel 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines FDDI front panel connections. + +ctFDDIFrontPanel1 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 1 connection. + +ctFDDIFrontPanel2 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 2 connection. + +ctFDDIFrontPanel3 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 3 connection. + +ctFDDIFrontPanel4 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 4 connection. + +ctFDDIFrontPanel5 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 5 connection. + +ctFDDIFrontPanel6 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 6 connection. + +ctFDDIFrontPanel7 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 7 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 7 connection. + +ctFDDIFrontPanel8 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 8 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 8 connection. + +ctFDDIFrontPanel9 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 9 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 9 connection. + +ctFDDIFrontPanel10 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 10 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 10 connection. + +ctFDDIFrontPanel11 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 11 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 11 connection. + +ctFDDIFrontPanel12 OBJECT IDENTIFIER ::= { ctFDDIFrontPanel 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines the FDDI front panel 12 connection. + +ctEthernetFrontPanel OBJECT IDENTIFIER ::= { ctFrontPanel 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines Ethernet front panel connections. + +ctFrontPanelATM OBJECT IDENTIFIER ::= { ctFrontPanel 3 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines ATM front panel connections. + +ctFrontPanelATM1 OBJECT IDENTIFIER ::= { ctFrontPanelATM 1 } +-- Status +-- mandatory +-- Descr +-- Defines this ATM interface as having one physical +-- interface. Not capable of port redundency. + +ctFrontPanelATM2 OBJECT IDENTIFIER ::= { ctFrontPanelATM 2 } +-- Status +-- mandatory +-- Descr +-- Defines this ATM interface as having two physical +-- interfaces. Capable of port redundency. + +ctFrontPanelTokenRing OBJECT IDENTIFIER ::= { ctFrontPanel 4 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines Token Ring front panel connections. + +ctFrontPanelWAN OBJECT IDENTIFIER ::= { ctFrontPanel 5 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines WAN front panel connections. + +ctFrontPanelComport OBJECT IDENTIFIER ::= { ctFrontPanel 6 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines Comport front panel connections. + +ctFrontPanelComport1 OBJECT IDENTIFIER ::= { ctFrontPanelComport 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines Comport front panel connection 1. + +ctFrontPanelComport2 OBJECT IDENTIFIER ::= { ctFrontPanelComport 2 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines Comport front panel connection 2. + +ctSFPSTypes OBJECT IDENTIFIER ::= { namingTree 12 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines a naming tree for SFPS entities. + +ctVLANS OBJECT IDENTIFIER ::= { namingTree 13 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines a naming tree for all virtual lan entities. + +ctLaneServices OBJECT IDENTIFIER ::= { namingTree 14 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- Defines a naming tree for Lane Services applications. + +lsSFpSMARTLANE OBJECT IDENTIFIER ::= { ctLaneServices 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory + +ctTrapsV1 OBJECT IDENTIFIER ::= { trapDefinitions 1 } +-- OBJECT-IDENTITY +-- Status +-- mandatory +-- Descr +-- This branch is reserved for all Cabletron traps that exist within +-- the context of both SNMPv1 and SNMPv2. + +END |