diff options
Diffstat (limited to 'MIBS/equallogic/EQL-LLDP-MIB')
| -rw-r--r-- | MIBS/equallogic/EQL-LLDP-MIB | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/MIBS/equallogic/EQL-LLDP-MIB b/MIBS/equallogic/EQL-LLDP-MIB new file mode 100644 index 0000000..8a7fb5c --- /dev/null +++ b/MIBS/equallogic/EQL-LLDP-MIB @@ -0,0 +1,243 @@ +-- Mib files packaged on Tue Mar 17 11:28:59 EDT 2015 for Storage Array Firmware V7.1.5 (R408054) + +EQL-LLDP-MIB DEFINITIONS ::= BEGIN + +-- ****************************************************************** +-- LLDP (IEEE 802.1AB) MIB +-- ****************************************************************** + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + enterprises, + Counter32, + Counter64, + Integer32, + Unsigned32 FROM SNMPv2-SMI -- [RFC2578] + TimeInterval, + MacAddress, + TruthValue FROM SNMPv2-TC -- [RFC2579] + ifIndex FROM RFC1213-MIB + equalLogic FROM EQUALLOGIC-SMI + eqlGroupId FROM EQLGROUP-MIB + eqlMemberIndex FROM EQLMEMBER-MIB + ; + +eqlLldpMib MODULE-IDENTITY + LAST-UPDATED "201503171528Z" + ORGANIZATION "EqualLogic Inc." + CONTACT-INFO + "Contact: Customer Support + Postal: Dell Inc + 300 Innovative Way, Suite 301, Nashua, NH 03062 + Tel: +1 603-579-9762 + E-mail: US-NH-CS-TechnicalSupport@dell.com + WEB: www.equallogic.com" + + DESCRIPTION + "Link Layer Discovery Protocol MIB module. + Copyright (c) 2010-2012 by Dell Inc. + + All rights reserved. This software may not be copied, disclosed, + transferred, or used except in accordance with a license granted + by Dell Inc. This software embodies proprietary information + and trade secrets of Dell Inc. + + Copyright (C) IEEE (2009). This version of this MIB module + is published as subclause 11.5.1 of IEEE Std 802.1AB-2009; + see the standard itself for full legal notices." + REVISION "201007230000Z" -- 7/23/2010 00:00GMT + DESCRIPTION + "Initial revision - based on IEEE 802.1AB-2009 Copyright (C) IEEE." + ::= { enterprises equalLogic(12740) 21 } + +eqlLldpMIBObjects OBJECT IDENTIFIER ::= { eqlLldpMib 1 } + +------------------------------------------------------------------- +-- IEEE 802.1AB - LLDP Textual Conventions +------------------------------------------------------------------- + +EqlLldpV2ChassisIdSubtype ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This describes the source of a chassis identifier." + SYNTAX INTEGER { + chassisComponent(1), + interfaceAlias(2), + portComponent(3), + macAddress(4), + networkAddress(5), + interfaceName(6), + local(7) + } + +EqlLldpV2ChassisId ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x:" + STATUS current + DESCRIPTION + "This describes the format of a chassis identifier string." + SYNTAX OCTET STRING (SIZE (255)) + +EqlLldpV2PortIdSubtype ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This describes the source of a particular type of port + identifier used in the LLDP MIB." + SYNTAX INTEGER { + interfaceAlias(1), + portComponent(2), + macAddress(3), + networkAddress(4), + interfaceName(5), + agentCircuitId(6), + local(7) + } + +EqlLldpV2PortId ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x:" + STATUS current + DESCRIPTION + "This describes the format of a port identifier string." + SYNTAX OCTET STRING (SIZE (1..255)) + +EqlLldpV2State ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This describes the state of LLDP for the port." + SYNTAX INTEGER { + off(0), + noPeer(1), + active(2), + multiplePeers(3) + } + + +-- +-- Dynamic LLDP interface table contains status information and +-- counters for LLDP. +-- +eqlLldpDynamicIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF EqlLldpDynamicIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "EqualLogic-Dynamic + A table of LLDP information per each interface of a system. + Each row in this table supplies values for one port's + LLDP parameters." + ::= { eqlLldpMIBObjects 1 } + +eqlLldpDynamicIfEntry OBJECT-TYPE + SYNTAX EqlLldpDynamicIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the LLDP table, containing information + about LLDP on a single interface." + INDEX { eqlGroupId, eqlMemberIndex, ifIndex } + ::= { eqlLldpDynamicIfTable 1 } + +EqlLldpDynamicIfEntry ::= SEQUENCE { + eqlLldpRemMacAddress MacAddress, + eqlLldpV2RemChassisIdSubtype EqlLldpV2ChassisIdSubtype, + eqlLldpV2RemChassisId EqlLldpV2ChassisId, + eqlLldpV2RemPortIdSubtype EqlLldpV2PortIdSubtype, + eqlLldpV2RemPortId EqlLldpV2PortId, + eqlLldpV2RemPortDesc OCTET STRING, + eqlLldpV2RemSysName OCTET STRING, + eqlLldpV2RemSysDesc OCTET STRING, + eqlLldpV2State EqlLldpV2State, + eqlLldpV2RemMgmtAddr OCTET STRING + } + +eqlLldpRemMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MAC address associated with the LLDP peer." + ::= { eqlLldpDynamicIfEntry 1 } + +eqlLldpV2RemChassisIdSubtype OBJECT-TYPE + SYNTAX EqlLldpV2ChassisIdSubtype + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of encoding used to identify the chassis + associated with the remote system." + ::= { eqlLldpDynamicIfEntry 2 } + +eqlLldpV2RemChassisId OBJECT-TYPE + SYNTAX EqlLldpV2ChassisId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string value used to identify the chassis component + associated with the remote system." + ::= { eqlLldpDynamicIfEntry 3 } + +eqlLldpV2RemPortIdSubtype OBJECT-TYPE + SYNTAX EqlLldpV2PortIdSubtype + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of encoding used to identify the port + associated with the remote system." + ::= { eqlLldpDynamicIfEntry 4 } + +eqlLldpV2RemPortId OBJECT-TYPE + SYNTAX EqlLldpV2PortId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string value used to identify the port component + associated with the remote system." + ::= { eqlLldpDynamicIfEntry 5 } + +eqlLldpV2RemPortDesc OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string value used to identify the description of + the given port associated with the remote system." + ::= { eqlLldpDynamicIfEntry 6 } + +eqlLldpV2RemSysName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string value used to identify the system name of the + remote system." + ::= { eqlLldpDynamicIfEntry 7 } + +eqlLldpV2RemSysDesc OBJECT-TYPE +SYNTAX OCTET STRING (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string value used to identify the system description + of the remote system." + ::= { eqlLldpDynamicIfEntry 8 } + +eqlLldpV2State OBJECT-TYPE + SYNTAX EqlLldpV2State + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current LLDP state for the port." + ::= { eqlLldpDynamicIfEntry 9 } + +eqlLldpV2RemMgmtAddr OBJECT-TYPE +SYNTAX OCTET STRING (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The management address reported by the remote system. + + If multiple addresses were reported, they are delimited by + commas." + ::= { eqlLldpDynamicIfEntry 10 } + +END |