diff options
Diffstat (limited to 'MIBS/ericsson/XF-RADIOLINK-PTP-TERMINAL-MIB')
| -rw-r--r-- | MIBS/ericsson/XF-RADIOLINK-PTP-TERMINAL-MIB | 8206 |
1 files changed, 8206 insertions, 0 deletions
diff --git a/MIBS/ericsson/XF-RADIOLINK-PTP-TERMINAL-MIB b/MIBS/ericsson/XF-RADIOLINK-PTP-TERMINAL-MIB new file mode 100644 index 0000000..1db5343 --- /dev/null +++ b/MIBS/ericsson/XF-RADIOLINK-PTP-TERMINAL-MIB @@ -0,0 +1,8206 @@ + XF-RADIOLINK-PTP-TERMINAL-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ entPhysicalIndex
+ FROM ENTITY-MIB
+ entLogicalIndex
+ FROM ENTITY-MIB
+ ifIndex
+ FROM IF-MIB
+ PerfCurrentCount, PerfIntervalCount
+ FROM PerfHist-TC-MIB
+ HCPerfCurrentCount
+ FROM HC-PerfHist-TC-MIB
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ TruthValue, TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Integer32, Counter32, Counter64, IpAddress
+ FROM SNMPv2-SMI
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+ DisplayString
+ FROM SNMPv2-TC
+ xfRadioLink
+ FROM XF-TOP-MIB;
+
+ xfRadioLinkPtpTerminalMIB MODULE-IDENTITY
+
+ LAST-UPDATED "202003170000Z" -- 17 March 2020
+ ORGANIZATION
+ "Ericsson AB"
+ CONTACT-INFO
+ "
+ Ericsson AB
+ BU Networks
+ SE-431 84 Molndal
+ Sweden
+ "
+ DESCRIPTION
+ "
+ This MIB defines objects on terminal level
+ for point-to-point Radiolink terminals.
+ "
+ REVISION "202003170000Z" -- 17 March 2020
+ DESCRIPTION
+ "
+ Rev PBB13
+ xfRLPMCurrent15mTable: added the following MOs:
+ - xfPMCurrent15mESR
+ - xfPMCurrent15mSESR
+ - xfPMCurrent15mBBER
+
+ xfRLPMCurrent24hTable: added the following MOs:
+ - xfPMCurrent24hESR
+ - xfPMCurrent24hSESR
+ - xfPMCurrent24hBBER
+ "
+
+ REVISION "201912200000Z" -- 20 December 2019
+ DESCRIPTION
+ "
+ Rev PBB12
+ Increased upper limit from 135 to 145 dBm and default value adjusted for following MOs:
+ - xfExtRFPMSetThreshold15mTLTM
+ - xfExtRFPMResetThreshold15mTLTM
+ - xfExtRFPMSetThreshold24hTLTM
+ "
+
+ REVISION "201911260000Z" -- 26 November 2019
+ DESCRIPTION
+ "
+ Rev PBB11
+ Increased upper limit from 35 to 45 dBm for following MOs:
+ - xfExtRFPMTLTS1Threshold
+ - xfExtRFPMCurrent24hTLMin
+ - xfExtRFPMCurrent24hTLMax
+ - xfExtRFPMInterval24hTLMin
+ - xfExtRFPMInterval24hTLMax
+ - xfExtRFPMCurrent15mTLMin
+ - xfExtRFPMCurrent15mTLMax
+ - xfExtRFPMInterval15mTLMin
+ - xfExtRFPMInterval15mTLMax
+ "
+
+ REVISION "201805230000Z" -- 23 May 2018
+ DESCRIPTION
+ "
+ Rev PBB10
+ Revert change of maximum and default values for Extended PM Thresholds
+ in following tables:
+ - xfRLExtRFPMConfigTable
+ - xfRLExtRFPMCurrent24hTable
+ - xfRLExtRFPMInterval24hTable
+ - xfRLExtRFPMCurrent15mTable
+ - xfRLExtRFPMInterval15mTable
+ "
+
+ REVISION "201804270000Z" -- 27 April 2018
+ DESCRIPTION
+ "
+ Rev PBB9
+ Updated maximum values of xfPMTLTS1Thresholds.
+ "
+
+ REVISION "201804060000Z" -- 6 April 2018
+ DESCRIPTION
+ "
+ Rev PBB8
+ Updated unit of measurement of XPI level in performance monitoring counters:
+ from dBm to dB.
+ "
+
+ REVISION "201709190000Z" -- 19 September 2017
+ DESCRIPTION
+ "
+ Rev PBB7
+ - Type of MOs xfPMCurrent24hBBEs/xfPMInterval24hBBEs and xfPMCurrent24hBBs/xfPMInterval24hBBs
+ changed to HCPerfCurrentCount.
+ - Updated description of MO xfPMSetThreshold15mBBEs: 9000 -> 9900.
+ "
+
+ REVISION "201705240000Z" -- 24 May 2017
+ DESCRIPTION
+ "
+ Rev PBB6
+ Introduction of new FF 60 MHz.
+ "
+
+ REVISION "201610240000Z" -- 24 October 2016
+ DESCRIPTION
+ "
+ Rev PBB5
+ New objects in xfRLPtpTerminalXTable:
+ xfTermPacketMaxCapacity and xfTermPacketMinCapacity.
+ "
+
+ REVISION "201605110000Z" -- 11 May 2016
+ DESCRIPTION
+ "
+ Rev PBB4
+ - 'xfTermSpectrumEfficiencyClassObsolete' MO moved to obsolete conformance group.
+ "
+
+ REVISION "201605100000Z" -- 10 May 2016
+ DESCRIPTION
+ "
+ Rev PBB3
+ - 'Obsolete' MOs set back to 'current' status
+ in order to remove warnings.
+ "
+
+ REVISION "201602220000Z" -- 22 February 2016
+ DESCRIPTION
+ "
+ Rev PBB2
+ - Description updated for some MOs.
+ - Readability improvements (formatting).
+ "
+
+ REVISION "201602050000Z" -- 5 February 2016
+ DESCRIPTION
+ "
+ Rev PBB1
+ - Added tables:
+ * xfRLExtRFPMConfigTable
+ * xfRLExtRFPMCurrent24hTable
+ * xfRLExtRFPMInterval24hTable
+ * xfRLExtRFPMCurrent15mTable
+ * xfRLExtRFPMInterval15mTable
+ * xfRLExtRAUPMCurrent24hTable
+ * xfRLExtRAUPMInterval24hTable
+ * xfRLExtRAUPMCurrent15mTable
+ * xfRLExtRAUPMInterval15mTable
+ - Obsoleted the following MOs in xfRLPMConfigTable:
+ * xfPMRLTS1Threshold
+ * xfPMSetThreshold15mRLTS1
+ * xfPMResetThreshold15mRLTS1
+ * xfPMRLTS2Threshold
+ * xfPMSetThreshold15mRLTS2
+ * xfPMResetThreshold15mRLTS2
+ * xfPMSetThreshold15mRLTM
+ * xfPMResetThreshold15mRLTM
+ * xfPMTLTS1Threshold
+ * xfPMSetThreshold15mTLTS1
+ * xfPMResetThreshold15mTLTS1
+ * xfPMSetThreshold15mTLTM
+ * xfPMResetThreshold15mTLTM
+ * xfPMSetThreshold24hRLTS1
+ * xfPMSetThreshold24hRLTS2
+ * xfPMSetThreshold24hRLTM
+ * xfPMSetThreshold24hTLTS1
+ * xfPMSetThreshold24hTLTM
+ "
+
+ REVISION "201506080000Z" -- 8 June 2015
+ DESCRIPTION
+ "
+ Rev PBA6
+ Updated description text for the following MOs:
+ xfPMSetThreshold15mRLTM, xfPMResetThreshold15mRLTM,
+ xfPMSetThreshold24hRLTM, xfPMSetThreshold15mTLTM,
+ xfPMResetThreshold15mTLTM, xfPMSetThreshold24hTLTM,
+ xfPMCurrent24hMSEMin, xfPMCurrent24hMSEMax,
+ xfPMInterval24hMSEMin, xfPMInterval24hMSEMax,
+ xfPMCurrent15mMSEMin, xfPMCurrent15mMSEMax,
+ xfPMInterval15mMSEMin, xfPMInterval15mMSEMax
+ "
+
+ REVISION "201502260000Z" -- 26 February 2015
+ DESCRIPTION
+ "
+ Rev PBA5
+ Add new MIBs for improved power monitoring
+ Table xfRLPMConfigTable new MOs:
+ xfPMRLTS1Threshold, xfPMSetThreshold15mRLTS1,
+ xfPMResetThreshold15mRLTS1, xfPMRLTS2Threshold,
+ xfPMSetThreshold15mRLTS2, xfPMResetThreshold15mRLTS2,
+ xfPMSetThreshold15mRLTM, xfPMResetThreshold15mRLTM,
+ xfPMTLTS1Threshold, xfPMSetThreshold15mTLTS1,
+ xfPMResetThreshold15mTLTS1, xfPMSetThreshold15mTLTM,
+ xfPMResetThreshold15mTLTM, xfPMSetThreshold24hRLTS1,
+ xfPMSetThreshold24hRLTS2, xfPMSetThreshold24hRLTM,
+ xfPMSetThreshold24hTLTS1, xfPMSetThreshold24hTLTM
+ Table xfRLPMCurrent24hTable new MOs:
+ xfPMCurrent24hRLTS1, xfPMCurrent24hRLTS2,
+ xfPMCurrent24hRLMin, xfPMCurrent24hRLMax,
+ xfPMCurrent24hTLTS1, xfPMCurrent24hTLMin,
+ xfPMCurrent24hTLMax, xfPMCurrent24hMSEMin,
+ xfPMCurrent24hMSEMax, xfPMCurrent24hXPIMin,
+ xfPMCurrent24hXPIMax
+ Table xfRLPMInterval24hTable New MOs:
+ xfPMInterval24hRLTS1, xfPMInterval24hRLTS2,
+ xfPMInterval24hRLMin, xfPMInterval24hRLMax,
+ xfPMInterval24hTLTS1, xfPMInterval24hTLMin,
+ xfPMInterval24hTLMax, xfPMInterval24hMSEMin,
+ xfPMInterval24hMSEMax, xfPMInterval24hXPIMin,
+ xfPMInterval24hXPIMax
+ Table xfRLPMCurrent15mTable new MOs:
+ xfPMCurrent15mRLTS1, xfPMCurrent15mRLTS2,
+ xfPMCurrent15mRLMin, xfPMCurrent15mRLMax,
+ xfPMCurrent15mTLTS1, xfPMCurrent15mTLMin,
+ xfPMCurrent15mTLMax, xfPMCurrent15mMSEMin,
+ xfPMCurrent15mMSEMax, xfPMCurrent15mXPIMin,
+ xfPMCurrent15mXPIMax
+ Table xfRLPMInterval15mTable new MOs:
+ xfPMInterval15mRLTS1, xfPMInterval15mRLTS2,
+ xfPMInterval15mRLMin, xfPMInterval15mRLMax,
+ xfPMInterval15mTLTS1, xfPMInterval15mTLMin,
+ xfPMInterval15mTLMax, xfPMInterval15mMSEMin,
+ xfPMInterval15mMSEMax, xfPMInterval15mXPIMin,
+ xfPMInterval15mXPIMax
+ "
+
+ REVISION "201407070000Z" -- 7 July 2014
+ DESCRIPTION
+ "
+ Rev PBA4
+ Comments adjusted.
+ "
+
+ REVISION "201402200000Z" -- 20 Febuary 2014
+ DESCRIPTION
+ "
+ Rev PBA3
+ Added SDC Performance tables:
+ - xfRLPMSDCGainCurrent15mTable
+ - xfRLPMSDCGainInterval15mTable
+ - xfRLPMSDCGainCurrent24hTable
+ - xfRLPMSDCGainInterval24hTable
+ - xfRLPMSDCGainConfigTable
+ "
+
+ REVISION "201401150000Z" -- 15 January 2014
+ DESCRIPTION
+ "
+ Rev PBA2
+ xfTermChannelModeCapability object extended with values:
+ - ccdp16QAM(3)
+ - ccdp64QAM(4)
+ - ccdp128QAM(5)
+ "
+
+ REVISION "201311220000Z" -- 22 November 2013
+ DESCRIPTION
+ "
+ Rev PBA1
+ Minor changes for removal of warnings.
+ "
+
+ REVISION "201311191400Z" -- 19 November 2013
+ DESCRIPTION
+ "
+ Rev AZ
+ Official R-State for M14A
+ "
+
+ REVISION "201309250000Z" -- 25 September 2013
+ DESCRIPTION
+ "Fixed error in xfRLPtpTerminalXTable definition"
+
+ REVISION "201309160000Z" -- 16 September 2013
+ DESCRIPTION
+ "Remoed objects in xfRLPtpTerminalXTable:
+ xfTermXpicStatus, xfTermXpiLevel, xfTermMSELevel"
+
+ REVISION "201307060000Z" -- 06 July 2013
+ DESCRIPTION
+ "New objects in xfRLPtpTerminalXTable:
+ xfTermXpicStatus, xfTermXpiLevel, xfTermMSELevel"
+
+ REVISION "201303280000Z" -- 28 March 2013
+ DESCRIPTION
+ "
+ Rev PAV1
+ New objects in xfRLPtpTerminalXTable:
+ xfTermConfiguredBitPipeCapacity and xfTermTribCapacityConfigured"
+
+ REVISION "201210260000Z" -- 26 October 2012
+ DESCRIPTION
+ "
+ Rev PAY2
+ * New values for XfRLPMAMCurrent15mTable: xfPMAMCurrent15m4QAMEnRLB -> xfPMAMCurrent15m1024QAMEnRLB
+ * New values for xfRLPMAMCurrent24hTable: xfPMAMCurrent24h4QAMEnRLB -> xfPMAMCurrent24h1024QAMEnRLB
+ * New values for XfRLPMAMInterval15mTable: xfPMAMInterval15m4QAMEnRLB -> xfPMAMInterval15m1024QAMEnRLB
+ * New values for XfRLPMAMInterval24hTable: xfPMAMInterval24h4QAMEnRLB -> xfPMAMInterval24h1024QAMEnRLB
+ * New value for xfRLPtpTerminalPerformanceTable: xfTermTimeElapsedEnRLBExt
+ "
+
+ REVISION "201208010000Z" -- 01 August 2012
+ DESCRIPTION
+ "
+ Rev PAF3
+ * New value for xfTermProtection: enhancedRLB.
+ * New values of xfRLProtectionMode: enhancedRLBProtected and enhancedRLBExtended.
+ * New values for xfTermProtectionCapability: nplus1 and enhancedRLB.
+ "
+
+ REVISION "201206240000Z" -- 24 June 2012
+ DESCRIPTION
+ "
+ Rev PAF2
+ * pdhToTdmAndSDHToSFPHAndSDHToPtP added to xfTermInterfaces
+ * Adjusted values in xfTermBerAlarmThresholdCapability
+ "
+
+ REVISION "201205290000Z" -- 29 May 2012
+ DESCRIPTION
+ "
+ Rev PAF1
+ Added xfTermBerAlarmThresholdCapability
+ "
+
+ REVISION "201112160000Z" -- 16 December 2011
+ DESCRIPTION
+ "
+ Rev AE
+ Changed to full revision
+ "
+
+ REVISION "201112040000Z" -- 04 December 2011
+ DESCRIPTION
+ "
+ Rev PAE3
+ Change name of mcOneStm1OneDS1LH
+ to oneStm1OneDS1LH
+ "
+
+ REVISION "201111220000Z" -- 22 November 2011
+ DESCRIPTION
+ "
+ Rev PAE2
+ New capacity value, mcOneStm1OneDS1LH(26)
+ New capacity value, mcOneStm1OneDS1LH(25)
+ to terminalcapacitycapability array
+ "
+
+ REVISION "201111170000Z" -- 17 November 2011
+ DESCRIPTION
+ "
+ Rev PAE1
+ Added fftAdmodStatic(10), fftXpicAdmodStatic(11),
+ fftAdmodStaticLH(12) and fftXpicAdmodStaticLH(13)
+ to xfTermFrameFormatType
+ "
+
+ REVISION "201111150000Z" -- 15 November 2011
+ DESCRIPTION
+ "
+ Rev AD
+ Updated to an official revision
+ "
+
+ REVISION "201109090000Z" -- 9 Sept 2011
+ DESCRIPTION
+ "
+ Rev PAD4
+ Added vr150(13), vr250(14), vr300(15),
+ vr400(16) and vr450(17) license
+ "
+
+ REVISION "201107080000Z" -- 8 July 2011
+ DESCRIPTION
+ "
+ Rev PAD3
+ New capacity value, oneStm1OneE1LH(24)
+ to terminalcapacitycapability array
+ "
+
+ REVISION "201106270000Z" -- 27 June 2011
+ DESCRIPTION
+ "
+ Rev PAD2
+ New capacity value, oneStm1OneE1LH(25)
+ "
+
+ REVISION "201106010000Z" -- 1 June 2011
+ DESCRIPTION
+ "
+ Rev PAD1
+ Changes for TN 5.0.
+ New objects in xfRLPtpTerminalXTable:
+ xfTermFadingRates and xfTermFadingRatesCapability.
+ "
+
+ REVISION "201105230000Z" -- 23 May 2011
+ DESCRIPTION
+ "
+ Rev AC
+ Official R-state for TN 4.4 FP
+ "
+
+ REVISION "201103040000Z" -- 4 march 2011
+ DESCRIPTION
+ "
+ Rev PAC11
+ Changes for Mini Link LH 1.0.
+ Added fftStaticLH(6), fftAdmodLH(7),
+ fftXpicLH(8) andfftXpicAdmodLH(9)to xfTermFrameFormatType
+ "
+
+ REVISION "201102090000Z" -- 9 February 2011
+ DESCRIPTION
+ "
+ Rev PAC10
+ Changes for TN 4.4FP.
+ Added capability-bit terminalCapacityLicense(3) to
+ MO xfTermCapability in table xfRLPtpTerminalXTable.
+ "
+
+ REVISION "201102010000Z" -- 1 February 2011
+ DESCRIPTION
+ "
+ Rev PAC9
+ Changes for TN 4.4FP.
+ Correction for 1024QAM.
+ "
+
+ REVISION "201101100000Z" -- 10 January 2011
+ DESCRIPTION
+ "
+ Rev PAC8
+ Changes for TN 4.4FP.
+ Added MO xfTermCapacityLicense to
+ xfRLPtpTerminalXTable.
+ Added table xfRLPtpTerminalCapacityLicenseTable
+ and it's MOs xfTermCapacityLicenseRange
+ xfTermMaxCapacityRange and xfTermMaxTribCapacityRange
+ "
+
+ REVISION "201012210000Z" -- 21 December 2010
+ DESCRIPTION
+ "
+ Rev PAC7
+ Changes for TN 4.4FP.
+ Added capability-bit txSwitchOverConfiguration to
+ MO xfRLProtectionCapability in table xfRLProtection.
+
+ Changed MO name from xfTermAdaptiveCapability to xfTermCapability
+ and changed the BITS name changing the supports-prefix to a adaptive-prefix
+ and added fragmentedTributaries.
+ "
+
+ REVISION "201012160000Z" -- 16 December 2010
+ DESCRIPTION
+ "
+ Rev PAC6
+ Changes for TN 4.4FP.
+ Changed MO-name from xfRLRemoteTxSwitchOverConfiguration to xfRLTxSwitchOverConfiguration.
+ "
+
+ REVISION "201012140000Z" -- 14 December 2010
+ DESCRIPTION
+ "
+ Rev PAC5
+ Added Describtion for TermAutoRemoveLoopEnable
+ Changed name on supportsAtpcFallbackWithAutoRestore
+ to supportsAtpcFallbackTimer.
+ Added Describtion for xfTermAdaptiveManualMode
+ "
+
+ REVISION "201012130000Z" -- 13 December 2010
+ DESCRIPTION
+ "
+ Rev PAC4
+ Changes for TN 4.4FP.
+ Added 1024QAM.
+ "
+
+ REVISION "201011230000Z" -- 23 November 2010
+ DESCRIPTION
+ "
+ Rev PAC3
+ Changes for TN 4.4FP.
+ Added xfRLRemoteTxSwitchOverConfiguration to xfRLProtectionTable.
+ "
+
+ REVISION "201010250000Z" -- 25 October 2010
+ DESCRIPTION
+ "
+ Rev PAC2
+ Changes for TN 4.4FP.
+ Added xfTermCapability(22) to
+ xfRlPtpTerminalXTable and enabledAsRequest(4) to
+ xfTermAdaptiveManualMode(13)
+ "
+
+ REVISION "201010210000Z" -- 21 October 2010
+ DESCRIPTION
+ "
+ Rev PAC1
+ Added supportsAtpcFallbackWithAutoRestore to xfTermAtpcCapability.
+ "
+
+ REVISION "201009130000Z" -- 13 September 2010
+ DESCRIPTION
+ "
+ Rev AB
+ Changes for TN 4.4.
+ Added xfTermAutoRemoveLoopEnable(21) to
+ xfRlPtpTerminalXTable.
+ "
+
+ REVISION "201009020000Z" -- 2 September 2010
+ DESCRIPTION
+ "
+ Rev PAB4
+ Changes for TN 4.4.
+ Added xfTermTribAllocationActual(19) and xfTermTribAllocationDesired(20) to
+ xfRlPtpTerminalXTable.
+ "
+
+ REVISION "201008200000Z" -- 20 Augusti 2010
+ DESCRIPTION
+ "
+ Rev PAB3
+ Changes for TN 4.4.
+ Added xfRLProtectionCapability(7) to xfRLProtectionTable.
+ "
+
+ REVISION "201006150000Z" -- 15 Juni 2010
+ DESCRIPTION
+ "
+ Rev PAB2
+ Added UnprotectedSD xfTermProtection and xfRLProtectionTable
+ Added TermProtectionCapbility and TermLineProtectionCapability
+ to XfRLPtpTerminalXEntry and xfRadioLinkPtpTerminalCompleteGroup
+ "
+
+ REVISION "201006040000Z" -- 4 Juni 2010
+ DESCRIPTION
+ "
+ Rev PAB
+ Added rlXfMLTNPT(6) to xfTermType
+ "
+
+ REVISION "201005270000Z" -- 27 Maj 2010
+ DESCRIPTION
+ "
+ Rev AA
+ Added vr500 license
+ "
+
+ REVISION "201001190000Z" -- 19 January 20010
+ DESCRIPTION
+ "
+ Rev Z
+ Official R-State for TN 4.3
+ "
+
+ REVISION "200911180000Z" -- 18 november 2009
+ DESCRIPTION
+ "
+ Rev PZ2
+ Added supportsAtpcFallback to xfTermAtpcCapability.
+ "
+
+ REVISION "200909180000Z" -- 18 september 2009
+ DESCRIPTION
+ "
+ Rev PZ
+ Added xfTermIpAddress to xfRLPtpTerminalXTable.
+ "
+
+ REVISION "200906260000Z" -- 26 june 2009
+ DESCRIPTION
+ "
+ Rev Y
+ Updated revision history.
+ "
+
+ REVISION "200906240000Z" -- 24 june 2009
+ DESCRIPTION
+ "
+ Rev Y
+ Official R-State for TN 4.2
+ "
+
+ REVISION "200904140000Z" -- 14 april 2009
+ DESCRIPTION
+ "
+ Rev PX11
+ Changes for TN 4.2
+ Spectrum Effeciency Class index values have changed.
+ Adde new Spectrum Effeciency Class/Capability values.
+ Added channelspacing chsp3500kHz(10).
+ Added validrow vr4(11).
+ "
+
+ REVISION "200903110000Z" -- 11 mars 2009
+ DESCRIPTION
+ "
+ Corrected bit fields for pmamconfig table.
+ "
+
+ REVISION "200903040000Z" -- 4 mars 2009
+ DESCRIPTION
+ "
+ Rev X
+ This is the same version as Rev PX9, with the changes below:
+ Changed name on fftAdaptive to fftAdMod.
+ "
+
+ REVISION "200902020000Z" -- 2 feb 2009
+ DESCRIPTION
+ "
+ Rev PX10
+ Added new tables:
+ - XfRLPMAMConfigTable
+ - XfRLPMAMInterval24hTable
+ - XfRLPMAMInterval15mTable
+ - XfRLPMAMCurrent24hTable
+ - XfRLPMAMCurrent15mTable
+ New type TermAdaptiveManualMode,
+ changed type xfTermAdaptiveManualMode.
+ "
+
+ REVISION "200901050000Z" -- 5 jan 2009
+ DESCRIPTION
+ "
+ Rev PX9
+ Fixed double index for xfRLPMInterval15mTable
+ "
+
+ REVISION "200812040000Z" -- 04 december 2008
+ DESCRIPTION
+ "
+ Rev PX8
+ Changes for TN 4.1/4.2
+ xfTermBitPipeCapacity description changed from Mbit to Kbit (TR: TTNTR00022525).
+ "
+
+ REVISION "200810020000Z" -- 02 october 2008
+ DESCRIPTION
+ "
+ Rev PX7
+ Changes for TN 4.1/4.2
+ Removed objects in xfRLPtpTerminalXTable: xfTermAdaptiveModulation
+ Changed objects in xfRLPtpTerminalXTable:
+ - from xfTermManualRowIndex to xfTermAdaptiveManualRowIndex
+ - from xfTermDCNHCapacity to xfTermDCNCapacity
+ Fixed double index issue in xfRLPtpTerminalXTable
+ "
+
+ REVISION "200809160000Z" -- 16 september 2008
+ DESCRIPTION
+ "
+ Rev PX6
+ Changes for TN 4.1
+ New objects in xfRLPtpTerminalXTable:
+ - xfTermActualRowIndex
+ - xfTermMaxRowIndex
+ - xfTermAdaptiveModulation
+ - xfTermManualRowIndex
+ - xfTermAdaptiveManualMode
+ "
+
+ REVISION "200808150000Z" -- 15 august 2008
+ DESCRIPTION
+ "
+ Rev PX5
+ Added rlXfMLStandalone(5) for xfTermTypes in xfRLPtpTerminalTable.
+ Fixed wrong values in xfTermFrameFormatRev for xfRlPtpTerminalCapabilityTable.
+ "
+
+ REVISION "200806250000Z" -- 25 june 2008
+ DESCRIPTION
+ "
+ Rev PX4
+ Changes for TN 4.1
+ Changes in table: xfRlPtpTerminalCapabilityTable
+ "
+
+ REVISION "200806240000Z" -- 24 june 2008
+ DESCRIPTION
+ "
+ Rev PX3
+ Changes for TN 4.1
+ Changes in table: xfRlPtpTerminalCapabilityTable (xfTermChannelModulation)
+ "
+
+ REVISION "200806180000Z" -- 18 june 2008
+ DESCRIPTION
+ "
+ Rev PX2
+ Changes for TN 4.1
+ Changes in table: xfRlPtpTerminalCapabilityTable
+ "
+
+ REVISION "200806040000Z" -- 4 june 2008
+ DESCRIPTION
+ "
+ Rev PX1
+ Changes for TN 4.1
+ New objects in xfRLPtpTerminalXTable:
+ xfTermTribCapacityActual
+ xfTermTribCapacityDesired
+ xfTermBitPipeCapacity
+ xfTermRowIndex
+
+ New table:
+ xfRlPtpTerminalCapabilityTable
+ "
+
+ REVISION "200806030000Z" -- 3 june 2008
+ DESCRIPTION
+ "
+ Rev V
+ Ordinary revision. No other changes.
+ "
+
+ REVISION "200804090000Z" -- 9 april 2008
+ DESCRIPTION
+ "
+ Rev PV5
+ Changes for TN4.0:
+ Default value descriptions for xfTermCapacity and xfTermModulation corrected.
+ "
+
+ REVISION "200803030000Z" -- 3 mar 2008
+ DESCRIPTION
+ "
+ Rev PV3/PV4
+ Changes for TN4.0:
+ xfTermCapacity and ...Capability extended with two new values: sixtynineDS1 and eightyDS1
+ xfRLPtpTerminalXTable added - with these MO's:
+ xfTermInterfaces
+ xfTermInterfacesCapability
+ xfTermChannelModeOperStatus (PV4)
+ xfTermXPICRestore (PV4)
+ "
+
+ REVISION "200710240000Z" -- 24 oct 2007
+ DESCRIPTION
+ "
+ Rev U
+ Ordinary revision for TN 3.3,
+ according to 1/155 19-CRH 109 625/1 Uae Rev V
+ "
+
+ REVISION "200708140000Z" -- 14 aug 2007
+ DESCRIPTION
+ "
+ Rev PU4
+ CR1045: New capacity value, oneStm1OneJ1(22)
+ "
+
+ REVISION "200707050000Z" -- 5 july 2007
+ DESCRIPTION
+ "
+ Rev PU3
+ Correction: xfPMInterval24hUASs and xfPMInterval24hBBs shall be read-only
+ "
+
+ REVISION "200707030000Z" -- 3 july 2007
+ DESCRIPTION
+ "
+ Rev PU2
+ New values for xfTermCapacity:
+ twentytwoE1(18),
+ thirtyfiveE1(19),
+ fortysixE1(20),
+ seventyfiveE1(21)
+
+ New values for xfTermCapacityCapability:
+ twentytwoE1(17),
+ thirtyfiveE1(18),
+ fortysixE1(19),
+ seventyfiveE1(20)
+ "
+
+ REVISION "200707020000Z" -- 2 july 2007
+ DESCRIPTION
+ "
+ Rev PU1
+ Mib file according to IMPLEMENT. PROPOSAL 6/1594-FCP 101 4733 Uen PB5
+ New tables:
+ xfRLPMConfigTable
+ xfRLPMCurrent24hTable
+ xfRLPMInterval24hTable
+ xfRLPMCurrent15mTable
+ xfRLPMInterval15mTable
+ "
+
+ REVISION "200706040000Z" -- 4 june 2007
+ DESCRIPTION
+ "
+ Rev T
+ Changes according to 1/15519-CRH109625/1 Uae Rev U.
+ - xfRLActiveTxRadio: Change in comment regarding relaxed access limitation.
+ - xfRLSwitchOverReset: Change in comment regarding relaxed access limitation.
+ "
+
+ REVISION "200703160000Z" -- 16 mar 2007
+ DESCRIPTION
+ "
+ Rev S
+ - xfTermTimeElapsed:
+ Corrected description field acc. to 1/15519-CRH109625/1 Uae Rev S.
+ - xfTermDCNRadioCapability:
+ Corrected literals, dcnLinexxx --> dcnRadioxxx
+ "
+
+ REVISION "200701170000Z" -- 17 jan 2007
+ DESCRIPTION
+ "
+ Rev N
+ Changes according to 1/15519-CRH109625/1 Uae Rev S
+ - xfTermCapacity: added value oneStm1oneE1at50MHz(17)
+
+ - xfTermCapacityCapability:
+ stm0(12) --> oneStm0(12)
+ stm1(13) --> oneStm1oneE1(13)
+ oneStm1oneDS1(15) added
+ oneStm1oneE1at50MHz(16) added
+
+ - xfTermLineProtection:
+ singleInterface(3) SI --> singleInterfaceLowSlot(3) SI low slot
+ --> singleInterfaceHighSlot(4) SI high slot
+ opticalSplitter(4) EEP --> opticalSplitter(5) EEP
+ equipmentAndLineProtection(5) ELP --> equipmentAndLineProtection(6) ELP
+
+ - xfRLLineProtectionMode:
+ singleInterface(3) --> singleInterfaceLowSlot(3)
+ --> singleInterfaceHighSlot(4)
+ opticalSplitter(4) --> opticalSplitter(5)
+ equipmentAndLineProtection(5) --> equipmentAndLineProtection(6)
+ "
+
+ REVISION "200611140000Z" -- November 14
+ DESCRIPTION
+ "
+ Rev M
+ Changes according to 1/15519-CRH109625/1 Uae Rev N
+ - xfRADIORSTable moved from XF-RADIOLINK-PTP-MODEM-MIB to this mib.
+ - xfRADIORSPerformanceTable moved from XF-RADIOLINK-PTP-MODEM-MIB to this mib.
+ "
+
+ REVISION "200609200000Z" -- September 20
+ DESCRIPTION
+ "
+ Rev L
+ Correction: Adding MO xfRLLineProtectionMode, according to
+ 1/15519-CRH109625/1 Uae Rev M
+ "
+
+ REVISION "200609191310Z" -- September 19, 2006 at 13:10 GMT
+ DESCRIPTION
+ "
+ Rev K.
+ Changed object syntax to improve the display in a mib browser.
+ Changed description for object xfTermAlarmSeverity according to
+ errata for 1/15519-CRH109625/1 Uae Rev M
+ "
+
+ REVISION "200609120000Z"
+ DESCRIPTION
+ "
+ Rev PK5.
+ Changes according to 1/15519-CRH109625/1 Uae Rev PM1
+ New objects in xfRLPtpTerminalTable
+ Moved object descriptions to make them visible in a mib browser.
+ "
+
+ REVISION "200609050000Z"
+ DESCRIPTION
+ "
+ Rev PK3.
+ - Changes according to 1/15519-CRH109625/1 Uae Rev L
+ - Changed value in xfTermCapacity:
+ oneStm1(14) --> oneStm1oneE1(14)
+ - Added value in xfTermCapacity:
+ oneStm1oneDS1(16)
+ - Added value in xfTermModulation:
+ qam64(6)
+ - Added value for xfTermModulationCapability:
+ qam64(4)
+ - Added objects in xfRlPtpTerminalTable to support SDH, license-handling and
+ frame-format handling:
+ xfTermChannelMode
+ xfTermChannelModeCapability
+ xfTermTrafficAndDCN
+ xfTermFrameFormat
+ xfTermFrameFormatCapability
+ - Changed description regarding relaxed far-end restrictions for these objects:
+ xfTermId
+ xfTermProtection
+ xfTermCapacity
+ xfTermModulation
+ xfTermRemoteIdCheck
+ xfTermRemoteId
+ xfTermFadeNotificationTimer
+ - Changed description regarding functionality for the object xfTermRestore.
+ - Changed description regarding default values for xfTermCapacity and xfTermModulation
+ "
+
+ REVISION "200603200000Z"
+ DESCRIPTION
+ "
+ Rev. J.
+ - Changes according to 1/15519-CRH109625/1 Uae Rev K
+ - Addition of Enum values for TermCapacity, TermCapacityCapability,
+ TermModulation, TermModulationCapability to support ANSI.
+ "
+
+ REVISION "200602240000Z"
+ DESCRIPTION
+ "
+ Rev. H.
+ - Access restrictions explained in the description field for each MO.
+ - Default value declarations in the description fields also includes the numerical value.
+ "
+
+ REVISION "200601310000Z"
+ DESCRIPTION
+ "
+ Rev. G.
+ - xfTermFadeNotificationTimer is read/write again.
+ - New value for xfRLLineProtectionStatus: rfInputThresholdProtection
+ - Object name xfEquipmentProtectionTable changed to xfTermEquipmentProtectionIndex
+ - xfTermSysName(octet string, read-only) added in xfRlPtpTerminalTable
+ "
+
+ REVISION "200503010000Z"
+ DESCRIPTION
+ "
+ Rev. F.
+ - Changes according to 1/15519-CRH109625/1 Uae Rev E and corrections:
+ - Enum values defined for xfRLProtectionMode in xfRLProtectionTable.
+ - MAX-ACCESS for MO xfTermFadeNotificationTimer, in xfRLPtpTerminalTable, corrected to be read-only
+ - Sequence-numbers for xfRLPtpTerminalPerformanceTable, xfRLProtectionTable and xfRLLineProtectionTable
+ adjusted to maintain compatibility.
+ "
+
+ REVISION "200412130000Z"
+ DESCRIPTION
+ "
+ Rev. E
+ - Changes according to 1/15519-CRH109625/1 Uae Rev D and trouble report HF38086 (see below)
+ - XfRLPtpTerminalEntry changed:
+ -- xfTermFarEndTxOn removed.
+ -- xfTermFadeNotificationTimer and xfEquipmentProtectionTable added
+ - Syntax for xfTermTrapEnable changed.
+ - xfRLPtpTerminalSwitchIfTable removed
+ - xfRLProtectionTable added
+ - xfRLLineProtectionTable added
+ - xfRadioLinkPtpTerminalCompleteGroup updated according to other changes.
+ - values for xfRLActiveTxRadio changed according to trouble report HF38086
+ - DEFVAL removed. Default value info declared in corresponding description fields.
+ "
+
+ REVISION "200407020000Z"
+ DESCRIPTION
+ "
+ Rev. D
+ - All ConfigAlarms are removed
+ - xfTermFarEndTxOn MO is added
+ "
+
+ REVISION "200406220000Z"
+ DESCRIPTION
+ "
+ Rev. C
+ - New coding of xfTermAsPort
+ "
+
+ REVISION "200406160000Z"
+ DESCRIPTION
+ "
+ Rev. B
+ - All config alarms are defined
+ - Alarms are updated with new names
+ - xfTermCurrentBBE now of Counter64 type
+ "
+
+ REVISION "200405250000Z"
+ DESCRIPTION
+ "
+ Rev. PB2
+ - Some minor changes
+ "
+
+ REVISION "200405171000Z"
+ DESCRIPTION
+ "
+ Rev. PB1
+ - Contact info updated with new contact person.
+ - xfTermSynchRemote, xfTermAlarm are removed.
+ - Management objects for restore, trap, remote Id check,
+ and preset are added.
+ - Some attributes in OutputPowerTable moved to RF level.
+ - xfTermCurrentAT removed.
+ "
+
+ REVISION "200401201000Z"
+ DESCRIPTION
+ "
+ Rev. A This revision has Integer limits added.
+ New xfTermAsPort object in xfRLPtpTerminalTable
+ added.
+ "
+
+ REVISION "200312171000Z"
+ DESCRIPTION
+ "
+ Rev. PA1 Initial revision
+ "
+
+ ::= { xfRadioLink 1 }
+
+--
+-- Textual conventions
+--
+
+ TermAdaptiveManualMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Adaptive Modulation mode"
+ SYNTAX INTEGER
+ {
+ other(1),
+ disable(2),
+ enable(3),
+ enabledAsRequest(4)
+ }
+
+ TermModulation ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Channel Modulation"
+ SYNTAX INTEGER
+ {
+ other(1),
+ cqpsk(2),
+ qam16(3),
+ qam128(4),
+ qam32(5),
+ qam64(6),
+ qam4(7),
+ qam8(8),
+ qam256(9),
+ qam512(10),
+ qam1024(11)
+ }
+
+ TermOutputPowerStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Output power mode"
+ SYNTAX INTEGER
+ {
+ other(1),
+ rtpc(2),
+ atpc(3),
+ localControl(4),
+ ra1LocalControlRa2Rtpc(5),
+ ra1RtpcRa2LocalControl(6)
+ }
+
+ ChannelMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Terminal channel mode"
+ SYNTAX INTEGER
+ {
+ other(1),
+ ccdp(2),
+ accp(3),
+ acap(4)
+ }
+
+ TermRauSec ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Spectrum Effeciency Class"
+ SYNTAX INTEGER
+ {
+ other(0),
+ sec2(1),
+ sec4(2),
+ sec5b(3)
+ }
+
+ TermAutoRemoveLoopEnable ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Auto Removal loops"
+ SYNTAX INTEGER
+ {
+ other(1),
+ enable(2),
+ disable(3)
+ }
+
+--
+-- Node definitions
+--
+ xfRadioLinkPtpTerminalObjects OBJECT IDENTIFIER
+ ::= { xfRadioLinkPtpTerminalMIB 1 }
+ xfRadioLinkPtpTerminalConformance OBJECT IDENTIFIER
+ ::= { xfRadioLinkPtpTerminalMIB 2 }
+
+------------------------------------------------------------------------------
+-- xfRLPtpTerminalTable
+------------------------------------------------------------------------------
+ xfRLPtpTerminalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPtpTerminalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Table for Radiolink point-to-point terminal managed objects.
+ The table is indexed with entLogicalIndex.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 1 }
+
+ xfRLPtpTerminalEntry OBJECT-TYPE
+ SYNTAX XfRLPtpTerminalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the xfRLPtpTerminalTable"
+ INDEX { entLogicalIndex}
+ ::= { xfRLPtpTerminalTable 1 }
+
+ XfRLPtpTerminalEntry ::=
+ SEQUENCE
+ {
+ xfTermId SnmpAdminString,
+ xfTermType INTEGER,
+ xfTermProtection INTEGER,
+ xfTermCapacity INTEGER,
+ xfTermCapacityCapability BITS,
+ xfTermModulation TermModulation,
+ xfTermModulationCapability BITS,
+ xfTermRestore INTEGER,
+ xfTermAlarmSeverity BITS,
+ xfTermTrapEnable INTEGER,
+ xfTermAsPort INTEGER,
+ xfTermRemoteIdCheck INTEGER,
+ xfTermRemoteId SnmpAdminString,
+ xfTermPreset INTEGER,
+ xfTermBerAlarmThreshold INTEGER,
+ xfTermFadeNotificationTimer Integer32,
+ xfTermEquipmentProtectionIndex Integer32,
+ xfTermSysName DisplayString,
+ xfTermChannelMode ChannelMode,
+ xfTermChannelModeCapability BITS,
+ xfTermTrafficAndDCN INTEGER,
+ xfTermFrameFormat INTEGER,
+ xfTermFrameFormatCapability BITS,
+ xfTermDCNRadioConfiguration INTEGER,
+ xfTermDCNRadioCapability BITS,
+ xfTermDCNLineConfiguration INTEGER,
+ xfTermDCNLineCapability BITS,
+ xfTermFadeNotificationConfiguration INTEGER,
+ xfTermLineProtection INTEGER
+ }
+
+--
+-- The xfRLPtpTerminalTable MOs
+--
+
+ xfTermId OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (4))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Network identity for terminal.
+ Same as GNM id.
+ Note! Id TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set.
+ Default = .TRMA. (also for Far End)
+ Near end access: read-write
+ Far end access: read-write (Traffic Node), read-only (other)
+ "
+ ::= { xfRLPtpTerminalEntry 1 }
+
+ xfTermType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ rlMLE(2),
+ rlXfMLE(3),
+ rlXfMLTN(4),
+ rlXfMLStandalone(5),
+ rlXfMLTNPT(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Terminal type
+ - other - Unknown
+ - rlMLE - MLE classic
+ - rlXfMLE - MMU2
+ - rlXfMLTN - MMU2B
+ - rlXfMLStandalone(5) - MMU2 CS
+ - rlXfMLTNPT(6) - Pt1
+ "
+ ::= { xfRLPtpTerminalEntry 2 }
+
+ xfTermProtection OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ unprotected(2),
+ protectedHotStandby(3),
+ protectedWorkingStandby(4),
+ unProtectedSDC(5),
+ enhancedRLB(6)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ This object sets the protection mode of the terminal.
+ - other - Unknown
+ - unprotected - 1+0
+ - protectedHotStandby - 1+1 Hot
+ - protectedWorkingStandby - 1+1 Working
+ - UnProtectedSDC - 1+0 with Space Diversity
+ - enhancedRLB - Enhanced Radio Link Bonding (1+1 PDH and 1+1/2+0 Ethernet)
+ Default value: unprotected(2)
+ Near end access: read-write
+ Far end access: read-write (Traffic Node), read-only (other)
+ "
+ ::= { xfRLPtpTerminalEntry 3 }
+
+ xfTermCapacity OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ twoE1(2),
+ fourE1(3),
+ oneE2(4),
+ twoE2(5),
+ oneE3oneE1(6),
+ twoE3(7),
+ fourE3(8),
+ fourDS1(9),
+ eightDS1(10),
+ sixteenDS1(11),
+ seventeenDS1(12),
+ oneStm0(13),
+ oneStm1oneE1(14),
+ thirtytwoDS1(15),
+ oneStm1oneDS1(16),
+ oneStm1oneE1at50MHz(17),
+ twentytwoE1(18),
+ thirtyfiveE1(19),
+ fortysixE1(20),
+ seventyfiveE1(21),
+ oneStm1OneJ1(22),
+ sixtynineDS1(23),
+ eightyDS1(24),
+ oneStm1OneE1LH(25),
+ oneStm1OneDS1LH(26)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ This object sets the capacity on the terminal
+ * other - Unknown
+ * twoE1 - 2x2 Mbps
+ * fourE1 - 4*2 Mbps (only rlMLE)
+ * oneE2 - 8 Mbps
+ * twoE2 - 2x8 Mbps
+ * oneE3oneE1 - 34+2 Mbps
+ * twoE3 - 2x34 Mbps
+ * fourE3 - 4*34 Mbps
+ * fourDS1 - 4xDS1
+ * eightDS1 - 8xDS1
+ * sixteenDS1 - 16*DS1
+ * seventeenDS1 - 16DS1+DS1
+ * oneStm0 - STM-0
+ * oneStm1oneE1 - STM-1+2
+ * thirtytwoDS1 - 32xDS1
+ * oneStm1oneDS1 - STM-1+DS1
+ * oneStm1oneE1at50MHz - STM-1+2 Mpbs @ 50 MHz
+ * twentytwoE1 - 22xE1
+ * thirtyfiveE1 - 35xE1
+ * fortysixE1 - 46xE1
+ * seventyfiveE1 - 75xE1
+ * oneStm1OneJ1 - 1xSTM-1 + 1xJ1
+ * sixtynineDS1 - 69xDS1
+ * eightyDS1 - 80xDS1
+ * oneStm1OneE1LH - STM-1+2 for LH
+ * oneStm1OneDS1LH - STM-1+DS1 for LH
+
+ Default value PDH CQPSK ETSI: twoE1(2) MMU2, MMU2 B, MMU2 C
+ Default value PDH CQPSK ANSI: fourDS1(9) MMU2 BA, MMU2 CA
+ Default value PDH QAM ETSI: twentytwoE1(18) MMU2 D
+ Default value PDH QAM ANSI: sixtynineDS1(23) MMU2 DA
+ Default value SDH ETSI: oneStm1oneE1(14) MMU2 E, MMU2 F
+ Default value SDH ANSI: oneStm1oneDS1(16) MMU2 E, MMU2 F
+
+ Near end access: read-write
+ Far end access: read-write (Traffic Node), read-only (MLE)
+
+ Note that setting far end xfTermCapacity will remove far end traffic cross connects.
+
+ oneStm1oneE1(14) and oneStm1oneE1at50MHz(17) has
+ the same capacity and modulation but at different
+ bandwidth, hence the two values.
+
+ Capacities above 2xE1 for MMU2 B OFH, MMU2 C OFH,
+ ATU and ATU B OFH are under license control.
+ "
+ ::= { xfRLPtpTerminalEntry 4 }
+
+ xfTermCapacityCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ oneE1(0),
+ twoE1(1),
+ fourE1(2),
+ oneE2(3),
+ twoE2(4),
+ oneE3oneE1(5),
+ twoE3(6),
+ fourE3(7),
+ fourDS1(8),
+ eightDS1(9),
+ sixteenDS1(10),
+ seventeenDS1(11),
+ oneStm0(12),
+ oneStm1oneE1(13),
+ thirtytwoDS1(14),
+ oneStm1oneDS1(15),
+ oneStm1oneE1at50MHz(16),
+ twentytwoE1(17),
+ thirtyfiveE1(18),
+ fortysixE1(19),
+ seventyfiveE1(20),
+ oneStm1OneJ1(21),
+ sixtynineDS1(22),
+ eightyDS1(23),
+ oneStm1OneE1LH(24),
+ oneStm1OneDS1LH(25)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the capacity capability on the terminal.
+ Binary AND on contained modems units capabilities.
+ "
+ ::= { xfRLPtpTerminalEntry 5 }
+
+ xfTermModulation OBJECT-TYPE
+ SYNTAX TermModulation
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ This object sets the modulation method on the terminal.
+ Legal settable values are:
+ - cqpsk(2) CQPSK
+ - qam16(3) 16-QAM
+ - qam128(4) 128-QAM
+ - qam32(5) 32-QAM
+ - qam64(6) 64-QAM
+ Default value PDH CQPSK ETSI: cqpsk(2) MMU2, MMU2 B, MMU2 C
+ Default value PDH CQPSK ANSI: cqpsk(2) MMU2 BA, MMU2 CA
+ Default value PDH QAM ETSI: qam16(3) MMU2 D
+ Default value PDH QAM ANSI: qam128(4) MMU2 DA
+ Default value SDH ETSI: qam128(4) MMU2 E, MMU2 F
+ Default value SDH ANSI: qam128(4) MMU2 E, MMU2 F
+ Near end access: read-write
+ Far end access: read-write (Traffic Node), read-only (other)
+ Note that setting far end xfTermModulation might remove far end traffic connections.
+ Modulation other than CQPSK for MMU2 C OFH are under license control.
+ "
+ ::= { xfRLPtpTerminalEntry 6 }
+
+ xfTermModulationCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ cqpsk(0),
+ qam16(1),
+ qam128(2),
+ qam32(3),
+ qam64(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the modulation capability on the terminal.
+ Binary AND on contained modems and radio units capabilities.
+ "
+ ::= { xfRLPtpTerminalEntry 7 }
+
+ xfTermRestore OBJECT-TYPE
+ SYNTAX INTEGER { restore(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ rlXfMLTN:
+ Restore command is clearing RF, IF and RxLoop, enable xfTermTrapEnable,
+ turn transmitter on and set protection switch mode to Auto.
+ In case of MMU2 E and MMU2 F it also clears the STM-1 Line Loop and Local Loop.
+
+ Far end rlMLE and rlXfMLE:
+ Restore command sets P-mark to off, all loops are set to off, all Test Port connections
+ are removed, Transmitter is set to On and Switch Mode is set to Auto.
+ "
+ ::= { xfRLPtpTerminalEntry 8 }
+
+ xfTermAlarmSeverity OBJECT-TYPE
+ SYNTAX BITS
+ {
+ termSeverity0(0),
+ termSeverity1(1),
+ termSeverity2(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the highest alarm severity for contained
+ units and interfaces in the terminal including E1, E2 and E3 interfaces.
+ Terminal alarm severity is indicated by 3 bits:
+ bits 012
+ 000 clear
+ 001 undetermined
+ 010 warning
+ 011 minor
+ 100 major
+ 101 critical
+ 110 not defined
+ 111 not applicable
+ "
+ ::= { xfRLPtpTerminalEntry 9 }
+
+ xfTermTrapEnable OBJECT-TYPE
+ SYNTAX INTEGER { unknown(1), enable(2), disable(3) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Disables/enables trap sending from this terminal.
+ Note, terminals with termType = rlXfMLE will not include E1, E2 and E3 interfaces.
+ Default value: enable(2)
+ "
+ ::= { xfRLPtpTerminalEntry 10 }
+
+ xfTermAsPort OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notAvailable(1),
+ aspX002(2),
+ aspX003(3),
+ aspX004(4),
+ aspX005(5),
+ aspX006(6),
+ aspX007(7),
+ aspX008(8),
+ aspX009(9),
+ aspX010(10),
+ aspX011(11),
+ aspX012(12),
+ aspX013(13),
+ aspX014(14),
+ aspX015(15),
+ aspX016(16),
+ aspX017(17),
+ aspX018(18),
+ aspX019(19),
+ aspX020(20),
+ aspX021(21)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ rlXfMLTN: Access server port used to reach far end terminals of type rlMLE or rlXfMLE,
+ else notAvailable (1).
+ rlXfMLE: Access server port used to reach a near end terminal of type rlXfMLE.
+ aspX002 - Port 3002/4002
+ .. - ..
+ aspX021 - Port 3021/4021
+
+ Note, Last available port differs between
+ different AMMs.
+ AMM 2p: aspX003
+ AMM 6p: aspX006
+ AMM 20p: aspX021
+
+ Near end access: read-only
+ Far end access: no access
+ "
+ ::= { xfRLPtpTerminalEntry 11 }
+
+ xfTermRemoteIdCheck OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ enable(2),
+ disable(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ This object sets if check of identity of remote terminal shall be performed or not.
+ Legal values are:
+ - enable(2): radio id check enabled
+ - disable(3): radio id check disabled
+ Default value: disable(3)
+ "
+ ::= { xfRLPtpTerminalEntry 12 }
+
+ xfTermRemoteId OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (4))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Network identity for remote terminal. Same as GNM id.
+ Note: TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set.
+ A change of the far end value might disconnect IP DCN, but
+ internal GNM connection will not be disconnected.
+ Default value: TRMB (initial)
+ "
+ ::= { xfRLPtpTerminalEntry 13 }
+
+ xfTermPreset OBJECT-TYPE
+ SYNTAX INTEGER { preset(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ For terminals with termType = rlXfMLE or rlMLE:
+ - Terminal is restored with factory settings.
+ - Protected terminals will be set to unprotected.
+ For terminals with termType = rlXfMLTN:
+ - Terminal is restored with default configuration.
+
+ Near end access: read-write
+ Far end access: no access
+ "
+ ::= { xfRLPtpTerminalEntry 14 }
+
+ xfTermBerAlarmThreshold OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ ber1e3(2),
+ ber1e4(3),
+ ber1e5(4),
+ ber1e6(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Threshold for BER alarm.
+ Legal values:
+ - ber1e3(2): BER=1e-3 (default)
+ - ber1e4(3): BER=1e-4
+ - ber1e5(4): BER=1e-5
+ - ber1e6(5): BER=1e-6
+ "
+ ::= { xfRLPtpTerminalEntry 15 }
+
+ xfTermFadeNotificationTimer OBJECT-TYPE
+ SYNTAX Integer32 (0..1000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Notification suppression timer for protection alarms.
+ Unit: 1 sec
+ Value range: 0-1000
+ Default value: 200
+ Near end access: read-write
+ Far end access: read-only (Traffic Node)
+ "
+ ::= { xfRLPtpTerminalEntry 16 }
+
+ xfTermEquipmentProtectionIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Unprotected: 0
+ Protected: EntPhysicalindex of MMU in lowest slot
+ "
+ ::= { xfRLPtpTerminalEntry 17 }
+
+ xfTermSysName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The system name of the TN hosting the terminal.
+ Near end terminal: a zero-length string is returned as MIB-II/system/sysName should be used instead.
+ Far end terminal: the system name is returned.
+ "
+ ::= { xfRLPtpTerminalEntry 18 }
+
+ xfTermChannelMode OBJECT-TYPE
+ SYNTAX ChannelMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Channel mode for the terminal (administrative status).
+ This is only settable according to xfTermChannelModeCapability.
+ Legal values are:
+ - ccdp(2): Co-Channel Dual Polarization (XPIC)
+ - accp(3): Adjacent Channels Co-Polarization (non-XPIC)
+ - acap(4): Adjacent Channels Alternate Polarization (non-XPIC)
+ Default value: acap(4)
+ Near end access: read-write
+ Far end access: read-write (Traffic Node only)
+ "
+ ::= { xfRLPtpTerminalEntry 19 }
+
+ xfTermChannelModeCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ ccdp(0),
+ accp(1),
+ acap(2),
+ ccdp16QAM(3),
+ ccdp64QAM(4),
+ ccdp128QAM(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Channel mode capability.
+ Legal values are:
+ - ccdp(0) ........ Co-Channel Dual Polarization (XPIC)
+ - accp(1) ........ Adjacent Channels Co-Polarization (non-XPIC)
+ - acap(2) ........ Adjacent Channels Alternate Polarization (non-XPIC)
+ - ccdp16QAM(3).... Co-Channel Dual Polarization (XPIC) for 16QAM only on MMU2 F
+ - ccdp64QAM(4).... Co-Channel Dual Polarization (XPIC) for 64QAM only on MMU2 F
+ - ccdp128QAM(5)... Co-Channel Dual Polarization (XPIC) for 128QAM only on MMU2 F
+ Default value: acap(2)
+ Near end access: read-write
+ Far end access: read-write (Traffic Node only)
+ "
+ ::= { xfRLPtpTerminalEntry 20 }
+
+ xfTermTrafficAndDCN OBJECT-TYPE
+ SYNTAX INTEGER {trafficAndDCN(1), dcnOnly(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Enable or disable traffic.
+ AIS is generated on all traffic interfaces when traffic is disabled,
+ i.e. xfTermTrafficAndDCN = DCNOnly. The hop and DCN is working, though
+ (primarily used for license handling).
+ Default value: trafficAndDCN(1)
+ Near end access: read-write
+ Far end access: read-write (Traffic Node only)
+ "
+ ::= { xfRLPtpTerminalEntry 21 }
+
+ xfTermFrameFormat OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ version0(2),
+ version1(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ The frame format version used by the modem.
+ Legal values are:
+ - version0(2) only valid for MMU2 C modems
+ - version1(3) only valid for MMU2 C modem.
+ Default value: other(1)
+ Near end access: read-write
+ Far end access: read-write (Traffic Node only)
+ "
+ ::= { xfRLPtpTerminalEntry 22 }
+
+ xfTermFrameFormatCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ version0(0),
+ version1(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Frame format versions supported by the modem.
+ Bit 0: modem MMU2 C supports frame format Version 0
+ Bit 1: modem MMU2 C supports frame format Version 1 (for QAM 2xE2, E3+E1 and 2xE3)
+ "
+ ::= { xfRLPtpTerminalEntry 23 }
+
+ xfTermDCNRadioConfiguration OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ dcnRadio128kbps(2),
+ dcnRadio320kbpsDCCr(3),
+ dcnRadio320kbpsMSB(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ DCN radio capacity for terminal.
+ Legal values are:
+ - dcnRadio128kbps(2) RFCOH channel only: all RSOH bytes pass transparently over the hop
+ - dcnRadio320kbpsDCCr(3) 128 kbps + DCCr (default)
+ - dcnRadio320kbpsMSB (4) 128 kbps + MSB
+
+ Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)]
+ are used when 320kbpsMSB value is selected.
+
+ Near end access: read-write
+ Far end access: read-write (Traffic Node only)
+ "
+ ::= { xfRLPtpTerminalEntry 24 }
+
+ xfTermDCNRadioCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ dcnRadio128kbps(0),
+ dcnRadio320kbpsDCCr(1),
+ dcnRadio320kbpsMSB(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Binary AND on contained MMUs DCN radio configuration capability.
+ bits 210
+ 000 undetermined
+ 001 128kbps
+ 010 320kbpsDCCr
+ 100 320kbpsMSB
+ ...
+ 111 128kbps & 320kbpsDCCr & 320kbpsMSB
+ "
+ ::= { xfRLPtpTerminalEntry 25 }
+
+ xfTermDCNLineConfiguration OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ transparent(2),
+ dcnLine192kbpsDCCr(3),
+ dcnLine192kbpsMSB(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ DCN line capacity for terminal.
+ Legal values are:
+ transparent(2) All RSOH bytes pass transparently over the hop.
+ dcnLine192kbpsDCCr(3) (default) DCCr
+ dcnLine192kbpsMSB(4) MSB
+
+ Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)]
+ are used when 192kbpsMSB value is selected.
+
+ Default value: dcnLine192kbpsDCCr(3)
+ Near end access: read-write
+ Far end access: read-write (Traffic Node only)
+ "
+ ::= { xfRLPtpTerminalEntry 26 }
+
+ xfTermDCNLineCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ transparent(0),
+ dcnLine192kbpsDCCr(1),
+ dcnLine192kbpsMSB(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Binary AND on contained MMUs DCN line configuration.
+ bits 210
+ 000 undetermined
+ 001 transparent
+ 010 192kbpsDCCr
+ 100 192kbpsMSB
+ ...
+ 111 transparent & 192kbpsDCCr & 192kbpsMSB
+ "
+ ::= { xfRLPtpTerminalEntry 27 }
+
+ xfTermFadeNotificationConfiguration OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ disabled(2),
+ enabled(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ This object enables or disables the notification suppress timer for Protection alarm.
+ Default value: enabled(3),
+ Near end access: read-write
+ Far end access: read-write (Traffic Node only)
+ "
+ ::= { xfRLPtpTerminalEntry 28 }
+
+ xfTermLineProtection OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ unProtected(2),
+ singleInterfaceLowSlot(3),
+ singleInterfaceHighSlot(4),
+ opticalSplitter(5),
+ equipmentAndLineProtection(6)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Administrative status of the line protection for a terminal physical line
+ interface, e.g. MMU2 E and MMU2 F. Operational status is xfRLLineProtectionMode.
+ Legal values are:
+ other(1) (Not settable)
+ unProtected(2)
+ singleInterfaceLowSlot(3) SI low slot
+ singleInterfaceHighSlot(4) SI high slot
+ opticalSplitter(5) EEP
+ equipmentAndLineProtection(6). ELP
+
+ Default value: unProtected(2)
+ Near end access: read-write
+ Far end access: read-write (Traffic Node only)
+ "
+ ::= { xfRLPtpTerminalEntry 29 }
+
+------------------------------------------------------------------------------
+-- xfRLPtpTerminalOutputPowerTable
+------------------------------------------------------------------------------
+ xfRLPtpTerminalOutputPowerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPtpTerminalOutputPowerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Table for Radiolink point-to-points terminal output power
+ managed objects. The tabled is indexed with entLogicalIndex.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 2 }
+
+ xfRLPtpTerminalOutputPowerEntry OBJECT-TYPE
+ SYNTAX XfRLPtpTerminalOutputPowerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the xfRLPtpTerminalOutputPowerTable"
+ INDEX { entLogicalIndex}
+ ::= { xfRLPtpTerminalOutputPowerTable 1 }
+
+ XfRLPtpTerminalOutputPowerEntry ::=
+ SEQUENCE
+ {
+ xfTermOutputPowerOperStatus TermOutputPowerStatus,
+ xfTermOutputPowerAdminStatus TermOutputPowerStatus,
+ xfTermAtpcCapability INTEGER
+ }
+
+--
+-- The xfRLPtpTerminalOutputPowerTable MOs
+--
+
+ xfTermOutputPowerOperStatus OBJECT-TYPE
+ SYNTAX TermOutputPowerStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the output power mode that is
+ running. It is necessarily not equal to configured mode.
+ "
+ ::= { xfRLPtpTerminalOutputPowerEntry 1 }
+
+ xfTermOutputPowerAdminStatus OBJECT-TYPE
+ SYNTAX TermOutputPowerStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ This object sets the output mode of the terminal.
+ Legal values are:
+ - other(1)
+ - rtpc(2)
+ - atpc(3)
+ - localControl(4)
+ - ra1LocalControlRa2Rtpc(5)
+ - ra1RtpcRa2LocalControl(6)
+
+ Note, It is only possible to select atpc if
+ xfTermAtpcCapability = supportsAtpc for both near end
+ and far end terminal. Value other(1) not settable.
+ Default value: rtpc(2)
+ "
+ ::= { xfRLPtpTerminalOutputPowerEntry 2 }
+
+ xfTermAtpcCapability OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ noAtpcSupport(2),
+ doesNotExist(3),
+ atpcCapabilityUnknown(4),
+ supportsAtpc(5),
+ supportsAtpcFallback(6),
+ supportsAtpcFallbackTimer(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the ATPC capability for the
+ terminal, calculated as worst case capability
+ for all units contained in the terminal.
+ "
+ ::= { xfRLPtpTerminalOutputPowerEntry 3 }
+
+------------------------------------------------------------------------------
+-- xfRLPtpTerminalPerformanceTable
+------------------------------------------------------------------------------
+ xfRLPtpTerminalPerformanceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPtpTerminalPerformanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Table for performance data. For 1+0 systems performance
+ data is calculated according to ITU-T Rec. G.826. For
+ 1+1 systems - calculated as the combined performance
+ of the protected terminal.
+
+ 1+0 terminals uses ifindex for RAU IF
+ 1+1 terminals uses ifindex for SWITCH IF
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 4 }
+
+ xfRLPtpTerminalPerformanceEntry OBJECT-TYPE
+ SYNTAX XfRLPtpTerminalPerformanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the xfRLPtpTerminalPerformanceTable"
+ INDEX { ifIndex}
+ ::= { xfRLPtpTerminalPerformanceTable 1 }
+
+ XfRLPtpTerminalPerformanceEntry ::=
+ SEQUENCE
+ {
+ xfTermTimeElapsed Counter32,
+ xfTermCurrentES Counter32,
+ xfTermCurrentSES Counter32,
+ xfTermCurrentBBE Counter64,
+ xfTermCurrentUAS Counter32,
+ xfTermCurrentBB Counter64,
+ xfTermPerfReset INTEGER,
+ xfTermTimeElapsedEnRLBExt Counter32
+ }
+
+--
+-- The xfRLPtpTerminalPerformanceTable MOs
+--
+
+ xfTermTimeElapsed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds that have elapsed
+ since the beginning of the current error-measurement
+ period.
+
+ If the current interval exceeds the maximum
+ value, the agent will return the maximum
+ value.
+ "
+ ::= { xfRLPtpTerminalPerformanceEntry 1 }
+
+ xfTermCurrentES OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the error seconds.
+ "
+ ::= { xfRLPtpTerminalPerformanceEntry 2 }
+
+ xfTermCurrentSES OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the severely error seconds.
+ "
+ ::= { xfRLPtpTerminalPerformanceEntry 3 }
+
+ xfTermCurrentBBE OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the background block errors.
+ "
+ ::= { xfRLPtpTerminalPerformanceEntry 4 }
+
+ xfTermCurrentUAS OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the unavailable seconds (or unavailable time).
+ "
+ ::= { xfRLPtpTerminalPerformanceEntry 5 }
+
+ xfTermCurrentBB OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the background blocks.
+ "
+ ::= { xfRLPtpTerminalPerformanceEntry 6 }
+
+ xfTermPerfReset OBJECT-TYPE
+ SYNTAX INTEGER { performanceReset(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ This object is used to reset the performance counters.
+ It is settable also when the radio unit isn't present.
+ Near end access: read-write
+ Far end access: read-write (Traffic Node only)
+ "
+ ::= { xfRLPtpTerminalPerformanceEntry 7 }
+
+ xfTermTimeElapsedEnRLBExt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds that have elapsed
+ in Enhanced RLB Extended capacity mode
+ since RLB was enabled and the beginning of
+ the current measurement period.
+ "
+ ::= { xfRLPtpTerminalPerformanceEntry 8 }
+
+------------------------------------------------------------------------------
+-- xfRLProtectionTable
+------------------------------------------------------------------------------
+ xfRLProtectionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLProtectionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Table for control and supervision of the protection mechanism
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 5 }
+
+ xfRLProtectionEntry OBJECT-TYPE
+ SYNTAX XfRLProtectionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the xfRLProtectionTable"
+ INDEX { entPhysicalIndex }
+ ::= { xfRLProtectionTable 1 }
+
+ XfRLProtectionEntry ::=
+ SEQUENCE
+ {
+ xfRLProtectionMode INTEGER,
+ xfRLProtectionRau1 Integer32,
+ xfRLProtectionRau2 Integer32,
+ xfRLActiveTxRadio INTEGER,
+ xfRLSwitchOverReset INTEGER,
+ xfRLSwitchRevertiveTx INTEGER,
+ xfRLProtectionCapability BITS,
+ xfRLTxSwitchOverConfiguration INTEGER
+ }
+
+--
+-- The xfRLProtectionTable MOs
+--
+
+ xfRLProtectionMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ unprotected(2),
+ protectedHotStandby(3),
+ protectedWorkingStandby(4),
+ unProtectedSDC(5),
+ enhancedRLBProtected(7),
+ enhancedRLBExtended(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This is the operational status of the protection mode.
+ Default: unprotected(2)
+ "
+ ::= { xfRLProtectionEntry 1 }
+
+ xfRLProtectionRau1 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ entPhysicalIndex for RAU 1.
+ "
+ ::= { xfRLProtectionEntry 2 }
+
+ xfRLProtectionRau2 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ entPhysicalIndex for RAU 2.
+ "
+ ::= { xfRLProtectionEntry 3 }
+
+ xfRLActiveTxRadio OBJECT-TYPE
+ SYNTAX INTEGER { txRadio1(1), txRadio2(2), txRadio1andtxRadio2(3) }
+
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Active radio setting.
+ Default value: txRadio1(1)
+ "
+ ::= { xfRLProtectionEntry 4 }
+
+ xfRLSwitchOverReset OBJECT-TYPE
+ SYNTAX INTEGER { reset(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Reset of the activated external alarms Tx Switch Over and Remote Tx Switch
+ Over by resetting internal alarms.
+ "
+ ::= { xfRLProtectionEntry 5 }
+
+ xfRLSwitchRevertiveTx OBJECT-TYPE
+ SYNTAX INTEGER { txRadio1(1), txRadio2(2), off(3) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Preferred Tx Radio.
+ Default value: off(3)
+ Near end access: read-write
+ Far end access: read-only (Traffic Node only)
+ "
+ ::= { xfRLProtectionEntry 6 }
+
+ xfRLProtectionCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ revertiveSwitching(0),
+ txSwitchOverConfiguration(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows the protection capabilities of the
+ traffic node.
+
+ Near end access: read-only
+ Far end access: read-only
+ "
+ ::={ xfRLProtectionEntry 7 }
+
+ xfRLTxSwitchOverConfiguration OBJECT-TYPE
+ SYNTAX INTEGER { other(1), disabled(2), enabled(3) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Indicates whether the remote Tx switching function and
+ Tx switchover alarm are enabled. When disabled, the
+ remote Tx switching function is disabled and Tx switchover
+ alarm is never raised and xfRLSwitchOverReset is never
+ needed to reset these alarms.
+ - Other (1)
+ - Disabled (2) (default)
+ - Enabled (3)
+
+ Near end access: read-write
+ Far end access: read-write
+ "
+ ::= { xfRLProtectionEntry 8 }
+
+------------------------------------------------------------------------------
+-- xfRLLineProtectionTable
+------------------------------------------------------------------------------
+ xfRLLineProtectionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLLineProtectionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Table for line protection status.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 6 }
+
+ xfRLLineProtectionEntry OBJECT-TYPE
+ SYNTAX XfRLLineProtectionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the xfRLLineProtectionTable"
+ INDEX { ifIndex }
+ ::= { xfRLLineProtectionTable 1 }
+
+ XfRLLineProtectionEntry ::=
+ SEQUENCE
+ {
+ xfRLLineProtectionStatus BITS,
+ xfRLLineProtectionMode INTEGER
+ }
+
+--
+-- The xfRLLineProtectionTable MOs
+--
+
+ xfRLLineProtectionStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ hitlessPhase0(0),
+ hitlessPhase1(1),
+ hitlessPhase2(2),
+ txSwitchover0(3),
+ txSwitchover1(4),
+ txSwitchover2(5),
+ remoteTxSwitchOver0(6),
+ remoteTxSwitchOver1(7),
+ remoteTxSwitchOver2(8),
+ rfInputThresholdProtection0(9),
+ rfInputThresholdProtection1(10),
+ rfInputThresholdProtection2(11)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Extension to xfLineProtectionStatus.
+ "
+ ::= { xfRLLineProtectionEntry 1 }
+
+ xfRLLineProtectionMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ unProtected(2),
+ singleInterfaceLowSlot(3),
+ singleInterfaceHighSlot(4),
+ opticalSplitter(5),
+ equipmentAndLineProtection(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Operational status of the line
+ protection for a terminal physical
+ line interface, e.g. MMU2 E and
+ MMU2 F.
+ Administrative status is
+ xfTermLineProtection.
+ "
+ ::= { xfRLLineProtectionEntry 2 }
+
+------------------------------------------------------------------------------
+-- xfRADIORSTable
+------------------------------------------------------------------------------
+ xfRADIORSTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRADIORSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Traffic node extension of ifTable. The tabled is indexed with ifIndex.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 7 }
+
+ xfRADIORSEntry OBJECT-TYPE
+ SYNTAX XfRADIORSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the xfRADIORSTable"
+ INDEX { ifIndex}
+ ::= { xfRADIORSTable 1 }
+
+ XfRADIORSEntry ::=
+ SEQUENCE
+ {
+ xfRADIORSAlarms BITS
+ }
+
+--
+-- The xfRADIORSTable MOs
+--
+ xfRADIORSAlarms OBJECT-TYPE
+ SYNTAX BITS
+ {
+ timRadioSide0(0),
+ timRadioSide1(1),
+ timRadioSide2(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows rau rs related alarms.
+ "
+ ::= { xfRADIORSEntry 1 }
+
+------------------------------------------------------------------------------
+-- xfRADIORSPerformanceTable
+------------------------------------------------------------------------------
+
+ xfRADIORSPerformanceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRADIORSPerformanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Traffic node extension of ifTable. The tabled is indexed with
+ ifIndex.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 8 }
+
+ xfRADIORSPerformanceEntry OBJECT-TYPE
+ SYNTAX XfRADIORSPerformanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the xfRADIORSPerformanceTable"
+ INDEX { ifIndex}
+ ::= { xfRADIORSPerformanceTable 1 }
+
+ XfRADIORSPerformanceEntry ::=
+ SEQUENCE
+ {
+ xfRADIORSPerformanceAlarms BITS
+ }
+
+--
+-- The xfRADIORSPerformanceTable MOs
+--
+ xfRADIORSPerformanceAlarms OBJECT-TYPE
+ SYNTAX BITS
+ {
+ b1UnavailablePeriod0(0),
+ b1UnavailablePeriod1(1),
+ b1UnavailablePeriod2(2),
+
+ b1Es15m0(3),
+ b1Es15m1(4),
+ b1Es15m2(5),
+
+ b1Ses15m0(6),
+ b1Ses15m1(7),
+ b1Ses15m2(8),
+
+ b1Bbe15m0(9),
+ b1Bbe15m1(10),
+ b1Bbe15m2(11),
+
+ b1Es24h0(12),
+ b1Es24h1(13),
+ b1Es24h2(14),
+
+ b1Ses24h0(15),
+ b1Ses24h1(16),
+ b1Ses24h2(17),
+
+ b1Bbe24h0(18),
+ b1Bbe24h1(19),
+ b1Bbe24h2(20)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This object shows RAU RS related alarms.
+ "
+ ::= { xfRADIORSPerformanceEntry 1 }
+
+------------------------------------------------------------------------------
+-- xfRLPMConfigTable
+------------------------------------------------------------------------------
+
+ xfRLPMConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains the alarm threshold values for RL PM"
+ ::= { xfRadioLinkPtpTerminalObjects 9 }
+
+ xfRLPMConfigEntry OBJECT-TYPE
+ SYNTAX XfRLPMConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLPMConfigTable."
+ INDEX { ifIndex }
+ ::= { xfRLPMConfigTable 1 }
+
+ XfRLPMConfigEntry ::=
+ SEQUENCE {
+ xfPMSetThreshold15mESs
+ Integer32,
+ xfPMSetThreshold15mSESs
+ Integer32,
+ xfPMSetThreshold15mBBEs
+ Integer32,
+ xfPMResetThreshold15mESs
+ Integer32,
+ xfPMResetThreshold15mSESs
+ Integer32,
+ xfPMResetThreshold15mBBEs
+ Integer32,
+ xfPMSetThreshold24hESs
+ Integer32,
+ xfPMSetThreshold24hSESs
+ Integer32,
+ xfPMSetThreshold24hBBEs
+ Integer32,
+ xfPMView
+ INTEGER,
+ xfPMStatus
+ BITS,
+ xfPMRLTS1Threshold
+ Integer32,
+ xfPMSetThreshold15mRLTS1
+ Integer32,
+ xfPMResetThreshold15mRLTS1
+ Integer32,
+ xfPMRLTS2Threshold
+ Integer32,
+ xfPMSetThreshold15mRLTS2
+ Integer32,
+ xfPMResetThreshold15mRLTS2
+ Integer32,
+ xfPMSetThreshold15mRLTM
+ Integer32,
+ xfPMResetThreshold15mRLTM
+ Integer32,
+ xfPMTLTS1Threshold
+ Integer32,
+ xfPMSetThreshold15mTLTS1
+ Integer32,
+ xfPMResetThreshold15mTLTS1
+ Integer32,
+ xfPMSetThreshold15mTLTM
+ Integer32,
+ xfPMResetThreshold15mTLTM
+ Integer32,
+ xfPMSetThreshold24hRLTS1
+ Integer32,
+ xfPMSetThreshold24hRLTS2
+ Integer32,
+ xfPMSetThreshold24hRLTM
+ Integer32,
+ xfPMSetThreshold24hTLTS1
+ Integer32,
+ xfPMSetThreshold24hTLTM
+ Integer32
+ }
+
+--
+-- The xfRLPMConfigTable MOs
+--
+
+ xfPMSetThreshold15mESs OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 15 minute set threshold for ES.
+ Default value is 180.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 1 }
+
+ xfPMSetThreshold15mSESs OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 15 minute set threshold for SES.
+ Default value is 15.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 2 }
+
+ xfPMSetThreshold15mBBEs OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 15 minute set threshold for BBE.
+ Default value is 9900.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 3 }
+
+ xfPMResetThreshold15mESs OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 15 minute reset threshold for ES.
+ Default value is 20.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 4 }
+
+ xfPMResetThreshold15mSESs OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 15 minute reset threshold for SES.
+ Default value is 1.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 5 }
+
+ xfPMResetThreshold15mBBEs OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 15 minute reset threshold for BBE.
+ Default value is 200.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 6 }
+
+ xfPMSetThreshold24hESs OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 24 hours set threshold for ES.
+ Default value is 1500.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 7 }
+
+ xfPMSetThreshold24hSESs OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 24 hours set threshold for SES.
+ Default value is 20.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 8 }
+
+ xfPMSetThreshold24hBBEs OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 24 hours set threshold for BBE.
+ Default value is 48000.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 9 }
+
+ xfPMView OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ pmEnable(1),
+ pmDisable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Enable/disable visibility of PM tables.
+ Default value: pmEnable(1)
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMConfigEntry 10 }
+
+ xfPMStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ unavailablePeriod0(0),
+ unavailablePeriod1(1),
+ unavailablePeriod2(2),
+
+ es15m0(3),
+ es15m1(4),
+ es15m2(5),
+
+ ses15m0(6),
+ ses15m1(7),
+ ses15m2(8),
+
+ bbe15m0(9),
+ bbe15m1(10),
+ bbe15m2(11),
+
+ es24h0(12),
+ es24h1(13),
+ es24h2(14),
+
+ ses24h0(15),
+ ses24h1(16),
+ ses24h2(17),
+
+ bbe24h0(18),
+ bbe24h1(19),
+ bbe24h2(20),
+
+-- Begin: these alarms are related to obsoleted MOs, they are not meaningful anymore
+ rlts1Counter15m0(21),
+ rlts1Counter15m1(22),
+ rlts1Counter15m2(23),
+
+ rlts2Counter15m0(24),
+ rlts2Counter15m1(25),
+ rlts2Counter15m2(26),
+
+ rltmCounter15m0(27),
+ rltmCounter15m1(28),
+ rltmCounter15m2(29),
+
+ tlts1Counter15m0(30),
+ tlts1Counter15m1(31),
+ tlts1Counter15m2(32),
+
+ tltmCounter15m0(33),
+ tltmCounter15m1(34),
+ tltmCounter15m2(35),
+
+ rlts1Counter24h0(36),
+ rlts1Counter24h1(37),
+ rlts1Counter24h2(38),
+
+ rlts2Counter24h0(39),
+ rlts2Counter24h1(40),
+ rlts2Counter24h2(41),
+
+ rltmCounter24h0(42),
+ rltmCounter24h1(43),
+ rltmCounter24h2(44),
+
+ tlts1Counter24h0(45),
+ tlts1Counter24h1(46),
+ tlts1Counter24h2(47),
+
+ tltmCounter24h0(48),
+ tltmCounter24h1(49),
+ tltmCounter24h2(50)
+-- End: these alarms are related to obsoleted MOs
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Threshold alarm status.
+ Values from rlts1Counter15m0(21) to tltmCounter24h2(50)
+ are related to obsoleted MOs."
+ ::= { xfRLPMConfigEntry 11 }
+
+ xfPMRLTS1Threshold OBJECT-TYPE
+ SYNTAX Integer32 (-999..-201)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "RLTS1 Alarm Threshold for Minimum RF Input Power.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.1 dBm]
+ Valid for both 15 m & 24 h intervals.
+ If changed current interval PM data must be reset.
+ Always less than RLTS2, xfPMRLTS2Threshold."
+ DEFVAL {-999}
+ ::= { xfRLPMConfigEntry 12 }
+
+ xfPMSetThreshold15mRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 15 minute.
+ Alarm Set threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS1 Alarm Threshold for Minimum RF Input Power
+ in current 15 minute interval.
+ Always greater than alarm Reset, xfPMResetThreshold15mRLTS1."
+ DEFVAL {150}
+ ::= { xfRLPMConfigEntry 13 }
+
+ xfPMResetThreshold15mRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 15 minute.
+ Alarm Reset threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS1 Alarm Threshold for Minimum RF Input Power
+ for entire current 15 minute interval.
+ Always less than alarm Set, xfPMSetThreshold15mRLTS1."
+ DEFVAL {1}
+ ::= { xfRLPMConfigEntry 14 }
+
+ xfPMRLTS2Threshold OBJECT-TYPE
+ SYNTAX Integer32 (-998..-200)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "RLTS2 Alarm Threshold for Minimum RF Input Power.
+ RF input level = value/10 dBm.
+ Domain: [-99.8 ... -20.0 dBm]
+ Valid for both 15 m & 24 h intervals.
+ If changed current interval PM data must be reset.
+ Always greater than RLTS1, xfPMRLTS1Threshold."
+ DEFVAL {-998}
+ ::= { xfRLPMConfigEntry 15 }
+
+ xfPMSetThreshold15mRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 15 minute.
+ Alarm Set threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS2 Alarm Threshold for Minimum RF Input Power
+ in current 15 minute interval.
+ Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTS2."
+ DEFVAL {180}
+ ::= { xfRLPMConfigEntry 16 }
+
+ xfPMResetThreshold15mRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 15 minute.
+ Alarm Reset threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS2 Alarm Threshold for Minimum RF Input Power
+ for entire current 15 minute interval.
+ Always less or equal to alarm Set, xfPMSetThreshold15mRLTS2."
+ DEFVAL {20}
+ ::= { xfRLPMConfigEntry 17 }
+
+ xfPMSetThreshold15mRLTM OBJECT-TYPE
+ SYNTAX Integer32 (10..800)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Receive Level Tide Mark (RLTM) 15 minute.
+ Alarm Set threshold for maximum allowed
+ max / min difference of RF Input Power
+ in current 15 minute interval.
+ RF input level = value/10 dB.
+ Domain: [1.0 ... 80.0 dB]
+ Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTM."
+ DEFVAL {800}
+ ::= { xfRLPMConfigEntry 18 }
+
+ xfPMResetThreshold15mRLTM OBJECT-TYPE
+ SYNTAX Integer32 (10..800)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Receive Level Tide Mark (RLTM) 15 minute.
+ Alarm Reset threshold for maximum allowed
+ max / min difference of RF Input Power
+ for entire current 15 minute interval.
+ RF input level = value/10 dB.
+ Domain: [1.0 ... 80.0 dB]
+ Always less or equal to alarm Set, xfPMSetThreshold15mRLTM."
+ DEFVAL {790}
+ ::= { xfRLPMConfigEntry 19 }
+
+ xfPMTLTS1Threshold OBJECT-TYPE
+ SYNTAX Integer32 (-100..45)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "TLTS1 Alarm Threshold for Maximum RF Output Power.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ Valid for both 15 m & 24 h intervals.
+ If changed current interval PM data must be reset."
+ DEFVAL {45}
+ ::= { xfRLPMConfigEntry 20 }
+
+ xfPMSetThreshold15mTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
+ Alarm Set threshold in number of seconds that
+ RF Output Power are allowed above the
+ TLTS1 Alarm Threshold for Maximum RF Output Power
+ in current 15 minute interval.
+ Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTS1."
+ DEFVAL {180}
+ ::= { xfRLPMConfigEntry 21 }
+
+ xfPMResetThreshold15mTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
+ Alarm Reset threshold in number of seconds that
+ RF Output Power are allowed above the
+ TLTS1 Alarm Threshold for Maximum RF Output Power
+ for entire current 15 minute interval.
+ Always less or equal to alarm Set, xfPMSetThreshold15mTLTS1."
+ DEFVAL {20}
+ ::= { xfRLPMConfigEntry 22 }
+
+ xfPMSetThreshold15mTLTM OBJECT-TYPE
+ SYNTAX Integer32 (1..145)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level Tide Mark (TLTM) 15 minute.
+ Alarm Set threshold for maximum allowed
+ max / min difference of RF Output Power
+ in current 15 minute interval.
+ RF output level = value dB.
+ Domain: [1 ... 145 dB]
+ Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTM."
+ DEFVAL {145}
+ ::= { xfRLPMConfigEntry 23 }
+
+ xfPMResetThreshold15mTLTM OBJECT-TYPE
+ SYNTAX Integer32 (1..145)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level Tide Mark (TLTM) 15 minute.
+ Alarm Reset threshold for maximum allowed
+ max / min difference of RF Output Power
+ for entire current 15 minute interval.
+ RF output level = value dB.
+ Domain: [1 ... 145 dB]
+ Always less or equal to alarm Set, xfPMSetThreshold15mTLTM."
+ DEFVAL {144}
+ ::= { xfRLPMConfigEntry 24 }
+
+ xfPMSetThreshold24hRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..86400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 24 hour.
+ Alarm Set / Reset threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS1 Alarm Threshold for Minimum RF Input Power
+ in current 24 hour interval."
+ DEFVAL {20}
+ ::= { xfRLPMConfigEntry 25 }
+
+ xfPMSetThreshold24hRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (1..86400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 24 hour.
+ Alarm Set / Reset threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS2 Alarm Threshold for Minimum RF Input Power
+ in current 24 hour interval."
+ DEFVAL {1500}
+ ::= { xfRLPMConfigEntry 26 }
+
+ xfPMSetThreshold24hRLTM OBJECT-TYPE
+ SYNTAX Integer32 (10..800)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Receive Level Tide Mark (RLTM) 24 hour.
+ Alarm Set / Reset threshold for maximum allowed
+ max / min difference of RF Input Power
+ in current 24 hour interval.
+ RF input level = value/10 dB.
+ Domain: [1.0 ... 80.0 dB]"
+ DEFVAL {800}
+ ::= { xfRLPMConfigEntry 27 }
+
+ xfPMSetThreshold24hTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..86400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Levels 1 Threshold Second (TLTS1) 24 hour.
+ Alarm Set / Reset threshold in number of seconds that
+ RF Output Power are allowed above the
+ TLTS1 Alarm Threshold for Maximum RF Output Power
+ in current 24 hour interval."
+ DEFVAL {1500}
+ ::= { xfRLPMConfigEntry 28 }
+
+ xfPMSetThreshold24hTLTM OBJECT-TYPE
+ SYNTAX Integer32 (1..145)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level Tide Mark (TLTM) 24 hour.
+ Alarm Set / Reset threshold for maximum allowed
+ max / min difference of RF Output Power
+ in current 24 hour interval.
+ RF output level = value dB.
+ Domain: [1 ... 145 dB]"
+ DEFVAL {145}
+ ::= { xfRLPMConfigEntry 29 }
+
+------------------------------------------------------------------------------
+-- xfRLPMCurrent24hTable
+------------------------------------------------------------------------------
+
+ xfRLPMCurrent24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TBD"
+ ::= { xfRadioLinkPtpTerminalObjects 10 }
+
+ xfRLPMCurrent24hEntry OBJECT-TYPE
+ SYNTAX XfRLPMCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLPMCurrent24hTable."
+ INDEX { ifIndex }
+ ::= { xfRLPMCurrent24hTable 1 }
+
+ XfRLPMCurrent24hEntry ::=
+ SEQUENCE {
+ xfPMCurrent24hTimeElapsed
+ Counter32,
+ xfPMCurrent24hESs
+ PerfCurrentCount,
+ xfPMCurrent24hSESs
+ PerfCurrentCount,
+ xfPMCurrent24hBBEs
+ HCPerfCurrentCount,
+ xfPMCurrent24hUASs
+ PerfCurrentCount,
+ xfPMCurrent24hBBs
+ HCPerfCurrentCount,
+ xfPMCurrent24hRLTS1
+ Integer32,
+ xfPMCurrent24hRLTS2
+ Integer32,
+ xfPMCurrent24hRLMin
+ Integer32,
+ xfPMCurrent24hRLMax
+ Integer32,
+ xfPMCurrent24hTLTS1
+ Integer32,
+ xfPMCurrent24hTLMin
+ Integer32,
+ xfPMCurrent24hTLMax
+ Integer32,
+ xfPMCurrent24hMSEMin
+ Integer32,
+ xfPMCurrent24hMSEMax
+ Integer32,
+ xfPMCurrent24hXPIMin
+ Integer32,
+ xfPMCurrent24hXPIMax
+ Integer32,
+ xfPMCurrent24hESR
+ PerfCurrentCount,
+ xfPMCurrent24hSESR
+ PerfCurrentCount,
+ xfPMCurrent24hBBER
+ HCPerfCurrentCount
+ }
+--
+-- The xfRLPMCurrent24hTable MOs
+--
+ xfPMCurrent24hTimeElapsed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that have elapsed since the
+ beginning of the current error-measurement period.
+
+ If the current interval exceeds the maximum value,
+ the agent will return the maximum value.
+ "
+ ::= { xfRLPMCurrent24hEntry 1 }
+
+ xfPMCurrent24hESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Errored Seconds in the current 24-hour interval."
+ ::= { xfRLPMCurrent24hEntry 2 }
+
+ xfPMCurrent24hSESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Severely Errored Seconds in the current 24-hour
+ interval."
+ ::= { xfRLPMCurrent24hEntry 3 }
+
+ xfPMCurrent24hBBEs OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Background Block Errors in the current 24 hour interval"
+ ::= { xfRLPMCurrent24hEntry 4 }
+
+ xfPMCurrent24hUASs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Unavailable seconds (or Unavailable Time) in the current
+ 24 hour interval."
+ ::= { xfRLPMCurrent24hEntry 5 }
+
+ xfPMCurrent24hBBs OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Background Blocks in the current 24
+ hour interval."
+ ::= { xfRLPMCurrent24hEntry 6 }
+
+ xfPMCurrent24hRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (0..86400|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 24 hour.
+ Number of seconds that the RF Input Power was below the RLTS1
+ in the current 24 hour interval.
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 7 }
+
+ xfPMCurrent24hRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (0..86400|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 24 hour.
+ Number of seconds that the RF Input Power was below the RLTS2
+ in the current 24 hour interval.
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 8 }
+
+ xfPMCurrent24hRLMin OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Input level in current 24 hour interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 9 }
+
+ xfPMCurrent24hRLMax OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Input level in current 24 hour interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 10 }
+
+ xfPMCurrent24hTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (0..86400|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
+ Number of seconds that the RF Output Power was above the TLTS1
+ in the current 24 hour interval
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 11 }
+
+ xfPMCurrent24hTLMin OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Output level in current 24 hour interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 12 }
+
+ xfPMCurrent24hTLMax OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Output level in current 24 hour interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 13 }
+
+ xfPMCurrent24hMSEMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min MSE level
+ in current 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 14 }
+
+ xfPMCurrent24hMSEMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max MSE level
+ in current 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 15 }
+
+ xfPMCurrent24hXPIMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min Cross-Polar Interference (XPI) level
+ in current 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 16 }
+
+ xfPMCurrent24hXPIMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max Cross-Polar Interference (XPI) level
+ in current 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent24hEntry 17 }
+
+ xfPMCurrent24hESR OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Error Seconds Ratio in the current 24-hour interval"
+ ::= { xfRLPMCurrent24hEntry 18 }
+
+ xfPMCurrent24hSESR OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Severely Error Seconds Ratio in the current 24-hour interval"
+ ::= { xfRLPMCurrent24hEntry 19 }
+
+ xfPMCurrent24hBBER OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Background Block Errors Ratio in the current 24-hour interval"
+ ::= { xfRLPMCurrent24hEntry 20 }
+
+------------------------------------------------------------------------------
+-- xfRLPMInterval24hTable
+------------------------------------------------------------------------------
+
+ xfRLPMInterval24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TBD"
+ ::= { xfRadioLinkPtpTerminalObjects 11 }
+
+ xfRLPMInterval24hEntry OBJECT-TYPE
+ SYNTAX XfRLPMInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLPMInterval24hTable."
+ INDEX { ifIndex }
+ ::= { xfRLPMInterval24hTable 1 }
+
+ XfRLPMInterval24hEntry ::=
+ SEQUENCE {
+ xfPMInterval24hESs
+ PerfIntervalCount,
+ xfPMInterval24hSESs
+ PerfIntervalCount,
+ xfPMInterval24hBBEs
+ HCPerfCurrentCount,
+ xfPMInterval24hUASs
+ PerfIntervalCount,
+ xfPMInterval24hBBs
+ HCPerfCurrentCount,
+ xfPMInterval24hValidData
+ TruthValue,
+ xfPMInterval24hRLTS1
+ Integer32,
+ xfPMInterval24hRLTS2
+ Integer32,
+ xfPMInterval24hRLMin
+ Integer32,
+ xfPMInterval24hRLMax
+ Integer32,
+ xfPMInterval24hTLTS1
+ Integer32,
+ xfPMInterval24hTLMin
+ Integer32,
+ xfPMInterval24hTLMax
+ Integer32,
+ xfPMInterval24hMSEMin
+ Integer32,
+ xfPMInterval24hMSEMax
+ Integer32,
+ xfPMInterval24hXPIMin
+ Integer32,
+ xfPMInterval24hXPIMax
+ Integer32
+ }
+
+--
+-- The xfRLPMInterval24hTable MOs
+--
+ xfPMInterval24hESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Errored Seconds encountered by a SONET/SDH
+ Section in the previous 24-hour interval."
+ ::= { xfRLPMInterval24hEntry 1 }
+
+ xfPMInterval24hSESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Severely
+ Errored Seconds encountered by a SONET/SDH
+ Section in the previous 24-hour interval."
+ ::= { xfRLPMInterval24hEntry 2 }
+
+ xfPMInterval24hBBEs OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Coding Violations (Errored Blocks)
+ encountered by a SONET/SDH Section in the
+ previous 24-hour interval."
+ ::= { xfRLPMInterval24hEntry 3 }
+
+ xfPMInterval24hUASs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of UnAvailable Seconds encountered by
+ a SONET/SDH Section in the previous 24 hour
+ interval."
+ ::= { xfRLPMInterval24hEntry 4 }
+
+ xfPMInterval24hBBs OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Background Blocks in a
+ SONET/SDH Section in the previous
+ 24 hour interval."
+ ::= { xfRLPMInterval24hEntry 5 }
+
+ xfPMInterval24hValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates whether the data
+ for this interval is valid."
+ ::= { xfRLPMInterval24hEntry 6 }
+
+ xfPMInterval24hRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (0..86400|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 24 hour.
+ Number of seconds that the RF Input Power was below the RLTS1
+ in the previous 24 hour interval.
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 7 }
+
+ xfPMInterval24hRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (0..86400|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 24 hour.
+ Number of seconds that the RF Input Power was below the RLTS2
+ in the previous 24 hour interval.
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 8 }
+
+ xfPMInterval24hRLMin OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Input level in previous 24 hour interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 9 }
+
+ xfPMInterval24hRLMax OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Input level in previous 24 hour interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 10 }
+
+ xfPMInterval24hTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (0..86400|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
+ Number of seconds that the RF Output Power was above the TLTS1
+ in the previous 24 hour interval
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 11 }
+
+ xfPMInterval24hTLMin OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Output level in previous 24 hour interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 12 }
+
+ xfPMInterval24hTLMax OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Output level in previous 24 hour interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 13 }
+
+ xfPMInterval24hMSEMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min MSE level
+ in previous 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 14 }
+
+ xfPMInterval24hMSEMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max MSE level
+ in previous 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 15 }
+
+ xfPMInterval24hXPIMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min Cross-Polar Interference (XPI) level
+ in previous 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 16 }
+
+ xfPMInterval24hXPIMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max Cross-Polar Interference (XPI) level
+ in previous 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval24hEntry 17 }
+
+------------------------------------------------------------------------------
+-- xfRLPMCurrent15mTable
+------------------------------------------------------------------------------
+
+ xfRLPMCurrent15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TBD"
+ ::= { xfRadioLinkPtpTerminalObjects 12 }
+
+ xfRLPMCurrent15mEntry OBJECT-TYPE
+ SYNTAX XfRLPMCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table."
+ INDEX { ifIndex }
+ ::= { xfRLPMCurrent15mTable 1 }
+
+ XfRLPMCurrent15mEntry ::=
+ SEQUENCE {
+ xfPMCurrent15mElapsedTime
+ Counter32,
+ xfPMCurrent15mESs
+ PerfCurrentCount,
+ xfPMCurrent15mSESs
+ PerfCurrentCount,
+ xfPMCurrent15mBBEs
+ PerfCurrentCount,
+ xfPMCurrent15mUASs
+ PerfCurrentCount,
+ xfPMCurrent15mBBs
+ PerfCurrentCount,
+ xfPMCurrent15mRLTS1
+ Integer32,
+ xfPMCurrent15mRLTS2
+ Integer32,
+ xfPMCurrent15mRLMin
+ Integer32,
+ xfPMCurrent15mRLMax
+ Integer32,
+ xfPMCurrent15mTLTS1
+ Integer32,
+ xfPMCurrent15mTLMin
+ Integer32,
+ xfPMCurrent15mTLMax
+ Integer32,
+ xfPMCurrent15mMSEMin
+ Integer32,
+ xfPMCurrent15mMSEMax
+ Integer32,
+ xfPMCurrent15mXPIMin
+ Integer32,
+ xfPMCurrent15mXPIMax
+ Integer32,
+ xfPMCurrent15mESR
+ PerfCurrentCount,
+ xfPMCurrent15mSESR
+ PerfCurrentCount,
+ xfPMCurrent15mBBER
+ HCPerfCurrentCount
+ }
+
+--
+-- The xfRLPMCurrent15mTable MOs
+--
+ xfPMCurrent15mElapsedTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that have elapsed since the beginning of
+ the current error-measurement period.
+ "
+ ::= { xfRLPMCurrent15mEntry 1 }
+
+ xfPMCurrent15mESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Error seconds in the current 15 minute interval."
+ ::= { xfRLPMCurrent15mEntry 2 }
+
+ xfPMCurrent15mSESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Severely error seconds in the current 15 minute interval."
+ ::= { xfRLPMCurrent15mEntry 3 }
+
+ xfPMCurrent15mBBEs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Background Block Errors in the current 15 minute interval."
+ ::= { xfRLPMCurrent15mEntry 4 }
+
+ xfPMCurrent15mUASs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Unavailable seconds (or Unavailable Time) in the current
+ 15 minute interval."
+ ::= { xfRLPMCurrent15mEntry 5 }
+
+ xfPMCurrent15mBBs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Background Blocks encountered by a SONET/SDH
+ Section in the current 15 minute interval."
+ ::= { xfRLPMCurrent15mEntry 6 }
+
+ xfPMCurrent15mRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (0..900|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 15 minute
+ Number of seconds that the RF Input Power was below the RLTS1
+ in the current 15 minute interval.
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 7 }
+
+ xfPMCurrent15mRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (0..900|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 15 minute
+ Number of seconds that the RF Input Power was below the RLTS2
+ in the current 15 minute interval.
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 8 }
+
+ xfPMCurrent15mRLMin OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Input level in current 15 minute interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 9 }
+
+ xfPMCurrent15mRLMax OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Input level in current 15 minute interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 10 }
+
+ xfPMCurrent15mTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (0..900|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level 1 Threshold Second (TLTS1) 15 minute
+ Number of seconds that the RF Output Power was above the TLTS1
+ in the current 15 minute interval
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 11 }
+
+ xfPMCurrent15mTLMin OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Output level in current 15 minute interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 12 }
+
+ xfPMCurrent15mTLMax OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Output level in current 15 minute interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 13 }
+
+ xfPMCurrent15mMSEMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min MSE level
+ in current 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 14 }
+
+ xfPMCurrent15mMSEMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max MSE level
+ in current 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 15 }
+
+ xfPMCurrent15mXPIMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min Cross-Polar Interference (XPI) level
+ in current 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 16 }
+
+ xfPMCurrent15mXPIMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max Cross-Polar Interference (XPI) level
+ in current 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMCurrent15mEntry 17 }
+
+ xfPMCurrent15mESR OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Error Seconds Ratio in the current 15 minute interval"
+ ::= { xfRLPMCurrent15mEntry 18 }
+
+ xfPMCurrent15mSESR OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Severely Error Seconds Ratio in the current 15 minute interval"
+ ::= { xfRLPMCurrent15mEntry 19 }
+
+ xfPMCurrent15mBBER OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Background Block Errors Ratio in the current 15 minute interval"
+ ::= { xfRLPMCurrent15mEntry 20 }
+
+------------------------------------------------------------------------------
+-- xfRLPMInterval15mTable
+------------------------------------------------------------------------------
+
+ xfRLPMInterval15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TBD"
+ ::= { xfRadioLinkPtpTerminalObjects 13 }
+
+ xfRLPMInterval15mEntry OBJECT-TYPE
+ SYNTAX XfRLPMInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table."
+ INDEX { ifIndex, xfPMInterval15mIntervalNumber }
+ ::= { xfRLPMInterval15mTable 1 }
+
+ XfRLPMInterval15mEntry ::=
+ SEQUENCE {
+ xfPMInterval15mIntervalNumber
+ Integer32,
+ xfPMInterval15mESs
+ PerfIntervalCount,
+ xfPMInterval15mSESs
+ PerfIntervalCount,
+ xfPMInterval15mBBEs
+ PerfIntervalCount,
+ xfPMInterval15mUASs
+ PerfIntervalCount,
+ xfPMInterval15mBBs
+ PerfIntervalCount,
+ xfPMInterval15mValidData
+ TruthValue,
+ xfPMInterval15mRLTS1
+ Integer32,
+ xfPMInterval15mRLTS2
+ Integer32,
+ xfPMInterval15mRLMin
+ Integer32,
+ xfPMInterval15mRLMax
+ Integer32,
+ xfPMInterval15mTLTS1
+ Integer32,
+ xfPMInterval15mTLMin
+ Integer32,
+ xfPMInterval15mTLMax
+ Integer32,
+ xfPMInterval15mMSEMin
+ Integer32,
+ xfPMInterval15mMSEMax
+ Integer32,
+ xfPMInterval15mXPIMin
+ Integer32,
+ xfPMInterval15mXPIMax
+ Integer32
+ }
+
+--
+-- The xfRLPMInterval15mTable MOs
+--
+ xfPMInterval15mIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the interval for which
+ the set of statistics is available. The interval identified by 1
+ is the most recently completed 15 minute interval, and the interval
+ identified by N is the interval immediately preceding the one
+ identified by N-1."
+ ::= { xfRLPMInterval15mEntry 1 }
+
+ xfPMInterval15mESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Error seconds in the xfPMInterval15mIntervalNumber 15 minute interval"
+ ::= { xfRLPMInterval15mEntry 2 }
+
+ xfPMInterval15mSESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Severely error seconds in the xfPDHCompInterval15mIntervalNumber
+ 15 minute interval."
+ ::= { xfRLPMInterval15mEntry 3 }
+
+ xfPMInterval15mBBEs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Background Block Errors in the xfPDHCompInterval15mIntervalNumber
+ 15 minute intervall."
+ ::= { xfRLPMInterval15mEntry 4 }
+
+ xfPMInterval15mUASs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "UnAvailable Seconds in the xfPDHCompInterval15mIntervalNumber
+ 15 minute interval."
+ ::= { xfRLPMInterval15mEntry 5 }
+
+ xfPMInterval15mBBs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Background blocks in the xfPDHCompInterval15mIntervalNumber 15 minute interval."
+ ::= { xfRLPMInterval15mEntry 6 }
+
+ xfPMInterval15mValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval is valid."
+ ::= { xfRLPMInterval15mEntry 7 }
+
+ xfPMInterval15mRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (0..900|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 15 minute
+ Number of seconds that the RF Input Power was below the RLTS1
+ in the previous 15 minute interval.
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 8 }
+
+ xfPMInterval15mRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (0..900|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 15 minute
+ Number of seconds that the RF Input Power was below the RLTS2
+ in the previous 15 minute interval.
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 9 }
+
+ xfPMInterval15mRLMin OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Input level in previous 15 minute interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 10 }
+
+ xfPMInterval15mRLMax OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Input level in previous 15 minute interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 11 }
+
+ xfPMInterval15mTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (0..900|-1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level 1 Threshold Second (TLTS1) 15 minute
+ Number of seconds that the RF Output Power was above the TLTS1
+ in the previous 15 minute interval
+ -1 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 12 }
+
+ xfPMInterval15mTLMin OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Output level in previous 15 minute interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 13 }
+
+ xfPMInterval15mTLMax OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Output level in previous 15 minute interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 14 }
+
+ xfPMInterval15mMSEMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min MSE level
+ in previous 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 15 }
+
+ xfPMInterval15mMSEMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max MSE level
+ in previous 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 16 }
+
+ xfPMInterval15mXPIMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min Cross-Polar Interference (XPI) level
+ in previous 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 17 }
+
+ xfPMInterval15mXPIMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max Cross-Polar Interference (XPI) level
+ in previous 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ Reset by xfTermPerfReset."
+ ::= { xfRLPMInterval15mEntry 18 }
+
+------------------------------------------------------------------------------
+-- xfRLPtpTerminalXTable
+------------------------------------------------------------------------------
+
+ xfRLPtpTerminalXTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPtpTerminalXEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Extension table to xfRLPtpTerminalTable.
+ The table is indexed with entLogicalIndex."
+ ::= { xfRadioLinkPtpTerminalObjects 14 }
+
+ xfRLPtpTerminalXEntry OBJECT-TYPE
+ SYNTAX XfRLPtpTerminalXEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table"
+ INDEX { entLogicalIndex }
+ ::= { xfRLPtpTerminalXTable 1 }
+
+ XfRLPtpTerminalXEntry ::=
+ SEQUENCE {
+ xfTermInterfaces INTEGER,
+ xfTermInterfacesCapability BITS,
+ xfTermChannelModeOperStatus ChannelMode,
+ xfTermXPICRestore INTEGER,
+ xfTermTribCapacityActual Integer32,
+ xfTermTribCapacityDesired Integer32,
+ xfTermBitPipeCapacity Integer32,
+ xfTermRowIndex Integer32,
+ xfTermCapabilitiesLastChange TimeTicks,
+ xfTermActualRowIndex Integer32,
+ xfTermMaxRowIndex Integer32,
+ xfTermAdaptiveManualRowIndex Integer32,
+ xfTermAdaptiveManualMode TermAdaptiveManualMode,
+ xfTermSpectrumEfficiencyClass INTEGER,
+ xfTermSpectrumEfficiencyClassCapability BITS,
+ xfTermIpAddress IpAddress,
+ xfTermProtectionCapability BITS,
+ xfTermLineProtectionCapability BITS,
+ xfTermTribAllocationActual BITS,
+ xfTermTribAllocationDesired BITS,
+ xfTermAutoRemoveLoopEnable TermAutoRemoveLoopEnable,
+ xfTermCapability BITS,
+ xfTermCapacityLicense INTEGER,
+ xfTermFadingRates INTEGER,
+ xfTermFadingRatesCapability BITS,
+ xfTermConfiguredBitPipeCapacity Integer32,
+ xfTermTribCapacityConfigured Integer32,
+ xfTermPacketMaxCapacity Integer32,
+ xfTermPacketMinCapacity Integer32
+ }
+
+--
+-- The xfRLPtpTerminalXTable MOs
+--
+ xfTermInterfaces OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ pdhToTdmHier(2),
+ pdhToTdmFlat(3),
+ pdhToTdmFlatAndBitpipeToPtp(4),
+ pdhToTdmAndSDHToSFP(5),
+ pdhToTdmAndSDHToPtp(6),
+ pdhToTdmAndSDHToSFPHAndSDHToPtP(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Interface constellation for the terminal"
+ ::= { xfRLPtpTerminalXEntry 1 }
+
+ xfTermInterfacesCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ pdhToTdmHier(0),
+ pdhToTdmFlat(1),
+ pdhToTdmFlatAndBitpipeToPtp(2),
+ pdhToTdmAndSDHToSFP(3),
+ pdhToTdmAndSDHToPtp(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interface constellation capability for the terminal"
+ ::= { xfRLPtpTerminalXEntry 2 }
+
+ xfTermChannelModeOperStatus OBJECT-TYPE
+ SYNTAX ChannelMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Channel mode for the terminal (operational status).
+ - ccdp(2): Co-Channel Dual Polarization (XPIC)
+ - accp(3): Adjacent Channels Co-Polarization (non-XPIC)
+ - acap(4): Adjacent Channels Alternate Polarization (non-XPIC)
+ "
+ ::= { xfRLPtpTerminalXEntry 3 }
+
+ xfTermXPICRestore OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ xPicRestore(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Restore XPIC"
+ ::= { xfRLPtpTerminalXEntry 4 }
+
+ xfTermTribCapacityActual OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual tributary capacity"
+ ::= { xfRLPtpTerminalXEntry 5 }
+
+ xfTermTribCapacityDesired OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Desired tributary capacity"
+ ::= { xfRLPtpTerminalXEntry 6 }
+
+ xfTermBitPipeCapacity OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bit pipe capacity, Kbps"
+ ::= { xfRLPtpTerminalXEntry 7 }
+
+ xfTermRowIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..100000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Points to a row in xfRlPtpTerminalCapabilityTable"
+ ::= { xfRLPtpTerminalXEntry 8 }
+
+ xfTermCapabilitiesLastChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time of the last creation or
+ deletion of an entry in the xfRLPtpTerminalCapabilityTable.
+ If the number of entries has been unchanged since the last
+ re-initialization of the local network management subsystem,
+ then this object contains a zero value."
+ ::= { xfRLPtpTerminalXEntry 9 }
+
+ xfTermActualRowIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual row that is pointed out in xfRlPtpTerminalCapabilityTable"
+ ::= { xfRLPtpTerminalXEntry 10 }
+
+ xfTermMaxRowIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Points to a row in xfRlPtpTerminalCapabilityTable where the maximum capacity is, including license"
+ ::= { xfRLPtpTerminalXEntry 11 }
+
+ xfTermAdaptiveManualRowIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Manual row index"
+ ::= { xfRLPtpTerminalXEntry 12 }
+
+ xfTermAdaptiveManualMode OBJECT-TYPE
+ SYNTAX TermAdaptiveManualMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Adaptive manual mode
+ - other(1)
+ - disable(2)(default)
+ - enable(3)
+ - enabledAsRequest(4)
+ "
+ ::= { xfRLPtpTerminalXEntry 13 }
+
+ xfTermSpectrumEfficiencyClass OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ sec2(2),
+ sec3(3),
+ sec4L(4),
+ sec4H(5),
+ sec5A(6),
+ sec5B(7),
+ sec6A(8),
+ sec6B(9)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Spectrum Efficiency Class:
+ - other(1): unknown
+ - sec2(2): spectrum eff. Class 2
+ - sec3(3): spectrum eff. Class 3
+ - sec4L(4): spectrum eff. Class 4L
+ - sec4H(5): specturm eff. Class 4H
+ - sec5A(6): spectrum eff. Class 5A
+ - sec5B(7): spectrum eff. Class 5B
+ - sec6A(8): spectrum eff. Class 6A
+ - sec6B(9): spectrum eff. Class 6B
+ Near end access: read-write
+ Far end access: read-write (Traffic Node), read-only (other)"
+ ::= { xfRLPtpTerminalXEntry 14 }
+
+ xfTermSpectrumEfficiencyClassCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ sec2(0),
+ sec3(1),
+ sec4L(2),
+ sec4H(3),
+ sec5A(4),
+ sec5B(5),
+ sec6A(6),
+ sec6B(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Spectrum Efficiency Class Capability
+ - 0 Sec2 Spectrum eff. Class 2
+ - 1 Sec3 Specturm eff. Class 3
+ - 2 Sec4L Specturm eff. Class 4L
+ - 3 Sec4H Spectrum eff. Class 4H
+ - 4 Sec5A Spectrum eff. Class 5A
+ - 5 Sec5B Spectrum eff. Class 5B
+ - 6 Sec6A Spectrum eff. Class 6A
+ - 7 Sec6B Spectrum eff. Class 6B
+ "
+ ::= { xfRLPtpTerminalXEntry 15 }
+
+ xfTermIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LAN ip address"
+ ::= { xfRLPtpTerminalXEntry 16 }
+
+ xfTermProtectionCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ unprotected(0),
+ protectedHotStandby(1),
+ protectedWorkingStandby(2),
+ unprotectedSD(3),
+ nplus1(4),
+ enhancedRLB(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Terminal protection capability
+ - 0 Unprotected ............... The terminal supports 1+0
+ - 1 protectedHotStandby ....... The terminal supports 1+1 Hot Standby
+ - 2 protectedWorkingStandby ... The terminal supports 1+1 Working Standby
+ - 3 unprotectedSD ............. The terminal supports 1+0 with Space diversity
+ - 4 nplus1 .................... The terminal supports N+1 protection (through RPS board)
+ - 5 enhancedRLB ............... The terminal supports Enhanced Radio Link Bonding
+ "
+ ::= { xfRLPtpTerminalXEntry 17 }
+
+ xfTermLineProtectionCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ unprotected(0),
+ singleInterfaceLowSlot(1),
+ singleInterfaceHighSlot(2),
+ opticalSplitter(3),
+ equipmentAndLineProtection(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Terminal Line protection capability
+ - 0 unprotected .................
+ - 1 singleInterfaceLowSlot ......
+ - 2 singleInterfaceHighSlot .....
+ - 3 opticalSplitter .............
+ - 4 equipmentAndLineProtection ..
+ "
+ ::= { xfRLPtpTerminalXEntry 18 }
+
+ xfTermTribAllocationActual OBJECT-TYPE
+ SYNTAX BITS { firstE1(0) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual tributary allocation in a MMU2 D or MMU2 H, the rest is packet link"
+ ::= { xfRLPtpTerminalXEntry 19 }
+
+ xfTermTribAllocationDesired OBJECT-TYPE
+ SYNTAX BITS { firstE1(0) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Desired tibutary allocation in a MMU2 D or MMU2 H, the rest is packet link"
+ ::= { xfRLPtpTerminalXEntry 20 }
+
+ xfTermAutoRemoveLoopEnable OBJECT-TYPE
+ SYNTAX TermAutoRemoveLoopEnable
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Auto Remove Loops
+ - other(1)
+ - enable(2) (default)
+ - disable(3)
+ "
+ ::= { xfRLPtpTerminalXEntry 21 }
+
+ xfTermCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ adaptiveManualTx(0),
+ adaptiveManualRx(1),
+ fragmentedTributaries(2),
+ terminalCapacityLicense(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Terminal capability"
+ ::= { xfRLPtpTerminalXEntry 22 }
+
+ xfTermCapacityLicense OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ vr0(0),
+ vr10(1),
+ vr25(2),
+ vr50(3),
+ vr100(4),
+ vr15(5),
+ vr30(6),
+ vr60(7),
+ vr125(8),
+ vr200(9),
+ vr350(10),
+ vr4(11),
+ vr500(12),
+ vr150(13),
+ vr250(14),
+ vr300(15),
+ vr400(16),
+ vr450(17)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Licensetable"
+ ::= { xfRLPtpTerminalXEntry 23 }
+
+ xfTermFadingRates OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ fr50(2),
+ fr100(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Fading rates
+ - other(1): unknown
+ - fr50(2): 50dB/s HighTroughputMode (default)
+ - fr150(3): 100dB/s HighFadingResistanceMode
+ "
+ ::= { xfRLPtpTerminalXEntry 24 }
+
+ xfTermFadingRatesCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ fr50(0),
+ fr100(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fading rate capability
+ - fr50(0): HighTroughputMode
+ - fr100(1): HighFadingResistanceMode"
+ ::= { xfRLPtpTerminalXEntry 25 }
+
+ xfTermConfiguredBitPipeCapacity OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Configured bit pipe capacity, Kbps"
+ ::= { xfRLPtpTerminalXEntry 26 }
+
+ xfTermTribCapacityConfigured OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Configured tributary capacity"
+ ::= { xfRLPtpTerminalXEntry 27 }
+
+ xfTermPacketMaxCapacity OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Packet Max Capacity"
+ ::= { xfRLPtpTerminalXEntry 28 }
+
+ xfTermPacketMinCapacity OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Packet Min Capacity"
+ ::= { xfRLPtpTerminalXEntry 29 }
+------------------------------------------------------------------------------
+-- xfRlPtpTerminalCapabilityTable
+------------------------------------------------------------------------------
+
+ xfRlPtpTerminalCapabilityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRlPtpTerminalCapabilityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table for misc. capability informatio."
+ ::= { xfRadioLinkPtpTerminalObjects 15 }
+
+ xfRlPtpTerminalCapabilityEntry OBJECT-TYPE
+ SYNTAX XfRlPtpTerminalCapabilityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table"
+ INDEX { entLogicalIndex, xfTermRowIndex }
+ ::= { xfRlPtpTerminalCapabilityTable 1 }
+
+ XfRlPtpTerminalCapabilityEntry ::=
+ SEQUENCE
+ {
+ xfTermChannelSpacing INTEGER,
+ xfTermChannelModulation TermModulation,
+ xfTermMaxTribCapacity Integer32,
+ xfTermDCNCapacity Integer32,
+ xfTermValidRow INTEGER,
+ xfTermMaxCapacity Integer32,
+ xfTermSpectrumEfficiencyClassObsolete TermRauSec,
+ xfTermFrameFormatType INTEGER,
+ xfTermFrameFormatRev INTEGER,
+ xfTermBerAlarmThresholdCapability BITS
+ }
+
+--
+-- The XfRlPtpTerminalCapabilityTable MOs
+--
+ xfTermChannelSpacing OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ chspUnknown(0),
+ chsp7MHz(1),
+ chsp14MHz(2),
+ chsp20MHz(3),
+ chsp28MHz(4),
+ chsp30MHz(5),
+ chsp40MHz(6),
+ chsp50MHz(7),
+ chsp56MHz(8),
+ chsp10MHz(9),
+ chsp3500kHz(10),
+ chsp60MHz(11)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Channel spacing
+ - ETSI: 3.5, 7, 14, 28, 40, 56 MHz
+ - ANSI: 10, 20, 30, 40, 50, 60 MHz
+ "
+ ::= { xfRlPtpTerminalCapabilityEntry 1 }
+
+ xfTermChannelModulation OBJECT-TYPE
+ SYNTAX TermModulation
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Channel modulation
+ - cqpsk(2) CQPSK
+ - qam16(3) 16-QAM
+ - qam128(4) 128-QAM
+ - qam32(5) 32-QAM
+ - qam64(6) 64-QAM
+ - qam4(7) 4-QAM
+ - qam8(8) 8-QAM
+ - qam256(9) 256-QAM
+ - qam512(10) 512-QAM
+ - qam1024(11) 1024-QAM
+ "
+ ::= { xfRlPtpTerminalCapabilityEntry 2 }
+
+ xfTermMaxTribCapacity OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Max number of tributaries"
+ ::= { xfRlPtpTerminalCapabilityEntry 3 }
+
+ xfTermDCNCapacity OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DCN hop capacity"
+ ::= { xfRlPtpTerminalCapabilityEntry 4 }
+
+ xfTermValidRow OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ vr0(0),
+ vr10(1),
+ vr25(2),
+ vr50(3),
+ vr100(4),
+ vr15(5),
+ vr30(6),
+ vr60(7),
+ vr125(8),
+ vr200(9),
+ vr350(10),
+ vr4(11),
+ vr500(12),
+ vr150(13),
+ vr250(14),
+ vr300(15),
+ vr400(16),
+ vr450(17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Max capacity license
+ - vr0(0) = invalid row
+ - vr10(1) = 10 Mbps, no license
+ - vr25(2) = 25 Mbps
+ - vr50(3) = 50 Mbps
+ - vr100(4) = 100 Mbps
+ - vr15(5) = 15 Mbps
+ - vr30(6) = 30 Mbps
+ - vr60(7) = 60 Mbps
+ - vr125(8) = 125 Mbps
+ - vr200(9) = 200 Mbps
+ - vr350(10) = 350 Mbps
+ - vr4(11) = 4 Mbps, no license
+ - vr500(12) = 500 Mbps
+ - vr150(13) = 150 Mbps
+ - vr250(14) = 250 Mbps
+ - vr300(15) = 300 Mbps
+ - vr400(16) = 400 Mbps
+ - vr450(17) = 450 Mbps
+ "
+ ::= { xfRlPtpTerminalCapabilityEntry 5 }
+
+ xfTermMaxCapacity OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Max capacity"
+ ::= { xfRlPtpTerminalCapabilityEntry 6 }
+
+ xfTermSpectrumEfficiencyClassObsolete OBJECT-TYPE
+ SYNTAX TermRauSec
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "xfTermSpectrumEfficiencyClassObsolete"
+ ::= { xfRlPtpTerminalCapabilityEntry 7 }
+
+ xfTermFrameFormatType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ fftOther(0),
+ fftStatic(1),
+ fftAdmod(2),
+ fftXpic(3),
+ fftXpicAdmod(4),
+ fftLegacy(5),
+ fftStaticLH(6),
+ fftAdmodLH(7),
+ fftXpicLH(8),
+ fftXpicAdmodLH(9),
+ fftAdmodStatic(10),
+ fftXpicAdmodStatic(11),
+ fftAdmodStaticLH(12),
+ fftXpicAdmodStaticLH(13)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frame format type
+ - fftOther(0)
+ - fftStatic(1)
+ - fftAdmod(2)
+ - fftXpic(3)
+ - fftXpicAdmod(4)
+ - fftLegacy(5)
+ - fftStaticLH(6)
+ - fftAdmodLH(7)
+ - fftXpicLH(8)
+ - fftXpicAdmodLH(9)
+ - fftAdmodStatic(10)
+ - fftXpicAdmodStatic(11)
+ - fftAdmodStaticLH(12)
+ - fftXpicAdmodStaticLH(13)
+ "
+ ::= { xfRlPtpTerminalCapabilityEntry 8 }
+
+ xfTermFrameFormatRev OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ffOther(1),
+ ffVersion0(2),
+ ffVersion1(3),
+ ffVersion2(4),
+ ffVersion3(5),
+ ffVersion4(6),
+ ffVersion5(7),
+ ffVersion6(8),
+ ffVersion7(9),
+ ffVersion8(10),
+ ffVersion9(11),
+ ffVersion10(12),
+ ffVersion11(13),
+ ffVersion12(14),
+ ffVersion13(15),
+ ffVersion14(16),
+ ffVersion15(17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frame format revision"
+ ::= { xfRlPtpTerminalCapabilityEntry 9 }
+
+ xfTermBerAlarmThresholdCapability OBJECT-TYPE
+ SYNTAX BITS
+ {
+ berThrCap1e3(0),
+ berThrCap1e4(1),
+ berThrCap1e5(2),
+ berThrCap1e6(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "List of the allowed BER thresholds"
+ ::= { xfRlPtpTerminalCapabilityEntry 10 }
+
+------------------------------------------------------------------------------
+-- xfRLPMAMConfigTable
+------------------------------------------------------------------------------
+
+ xfRLPMAMConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMAMConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Alarm threshold values for RL PM"
+ ::= { xfRadioLinkPtpTerminalObjects 16 }
+
+ xfRLPMAMConfigEntry OBJECT-TYPE
+ SYNTAX XfRLPMAMConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLPMAMConfigTable"
+ INDEX { ifIndex }
+ ::= { xfRLPMAMConfigTable 1 }
+
+ XfRLPMAMConfigEntry ::=
+ SEQUENCE {
+ xfPMAMSetThreshold15m
+ Integer32,
+ xfPMAMSetThreshold24h
+ Integer32,
+ xfPMAMResetThreshold15m
+ Integer32,
+ xfPMAMStatus
+ BITS,
+ xfPMAMValidData
+ BITS
+ }
+
+--
+-- The xfRLPMAMConfigTable MOs
+--
+
+ xfPMAMSetThreshold15m OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 15 minute set threshold for AdMod.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMAMConfigEntry 1 }
+
+ xfPMAMSetThreshold24h OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 24 hour set threshold for AdMod.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMAMConfigEntry 2 }
+
+ xfPMAMResetThreshold15m OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 15 minute reset threshold for AdMod.
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLPMAMConfigEntry 3 }
+
+ xfPMAMStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ am15m1(0),
+ am15m2(1),
+ am15m3(2),
+
+ am24h1(3),
+ am24h2(4),
+ am24h3(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Threshold alarm status"
+ ::= { xfRLPMAMConfigEntry 4 }
+
+ xfPMAMValidData OBJECT-TYPE
+ SYNTAX BITS
+ {
+ valid15m4QAM(0),
+ valid15m8QAM(1),
+ valid15m16QAM(2),
+ valid15m32QAM(3),
+ valid15m64QAM(4),
+ valid15m128QAM(5),
+ valid15m256QAM(6),
+ valid15m512QAM(7),
+ valid15m1024QAM(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It reports which modulation's PM data that are valid."
+ ::= { xfRLPMAMConfigEntry 5 }
+
+------------------------------------------------------------------------------
+-- xfRLPMAMCurrent24hTable
+------------------------------------------------------------------------------
+
+ xfRLPMAMCurrent24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMAMCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TBD"
+ ::= { xfRadioLinkPtpTerminalObjects 17 }
+
+ xfRLPMAMCurrent24hEntry OBJECT-TYPE
+ SYNTAX XfRLPMAMCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLPMAMCurrent24hTable."
+ INDEX { ifIndex }
+ ::= { xfRLPMAMCurrent24hTable 1 }
+
+ XfRLPMAMCurrent24hEntry ::=
+ SEQUENCE {
+ xfPMAMCurrent24h4QAM
+ PerfCurrentCount,
+ xfPMAMCurrent24h8QAM
+ PerfCurrentCount,
+ xfPMAMCurrent24h16QAM
+ PerfCurrentCount,
+ xfPMAMCurrent24h32QAM
+ PerfCurrentCount,
+ xfPMAMCurrent24h64QAM
+ PerfCurrentCount,
+ xfPMAMCurrent24h128QAM
+ PerfCurrentCount,
+ xfPMAMCurrent24h256QAM
+ PerfCurrentCount,
+ xfPMAMCurrent24h512QAM
+ PerfCurrentCount,
+ xfPMAMCurrent24h1024QAM
+ PerfCurrentCount,
+ xfPMAMCurrent24h4QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent24h8QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent24h16QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent24h32QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent24h64QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent24h128QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent24h256QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent24h512QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent24h1024QAMEnRLB
+ PerfCurrentCount
+ }
+--
+-- The xfRLPMAMCurrent24hTable MOs
+--
+
+ xfPMAMCurrent24h4QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 1 }
+
+ xfPMAMCurrent24h8QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 2 }
+
+ xfPMAMCurrent24h16QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 3 }
+
+ xfPMAMCurrent24h32QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 4 }
+
+ xfPMAMCurrent24h64QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 5 }
+
+ xfPMAMCurrent24h128QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 6 }
+
+ xfPMAMCurrent24h256QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 7 }
+
+ xfPMAMCurrent24h512QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 8 }
+
+ xfPMAMCurrent24h1024QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 9 }
+
+ xfPMAMCurrent24h4QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 10 }
+
+ xfPMAMCurrent24h8QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 11 }
+
+ xfPMAMCurrent24h16QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 12 }
+
+ xfPMAMCurrent24h32QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 13 }
+
+ xfPMAMCurrent24h64QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 14 }
+
+ xfPMAMCurrent24h128QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 15 }
+
+ xfPMAMCurrent24h256QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 16 }
+
+ xfPMAMCurrent24h512QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 17 }
+
+ xfPMAMCurrent24h1024QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid time since reset"
+ ::= { xfRLPMAMCurrent24hEntry 18 }
+
+------------------------------------------------------------------------------
+-- xfRLPMAMInterval24hTable
+------------------------------------------------------------------------------
+
+ xfRLPMAMInterval24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMAMInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TBD"
+ ::= { xfRadioLinkPtpTerminalObjects 18 }
+
+ xfRLPMAMInterval24hEntry OBJECT-TYPE
+ SYNTAX XfRLPMAMInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLPMAMInterval24hTable."
+ INDEX { ifIndex }
+ ::= { xfRLPMAMInterval24hTable 1 }
+
+ XfRLPMAMInterval24hEntry ::=
+ SEQUENCE {
+ xfPMAMInterval24h4QAM
+ PerfIntervalCount,
+ xfPMAMInterval24h8QAM
+ PerfIntervalCount,
+ xfPMAMInterval24h16QAM
+ PerfIntervalCount,
+ xfPMAMInterval24h32QAM
+ PerfIntervalCount,
+ xfPMAMInterval24h64QAM
+ PerfIntervalCount,
+ xfPMAMInterval24h128QAM
+ PerfIntervalCount,
+ xfPMAMInterval24h256QAM
+ PerfIntervalCount,
+ xfPMAMInterval24h512QAM
+ PerfIntervalCount,
+ xfPMAMInterval24hValidData
+ TruthValue,
+ xfPMAMInterval24h1024QAM
+ PerfIntervalCount,
+ xfPMAMInterval24h4QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval24h8QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval24h16QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval24h32QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval24h64QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval24h128QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval24h256QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval24h512QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval24h1024QAMEnRLB
+ PerfIntervalCount
+ }
+
+--
+-- The xfRLPMAMInterval24hTable MOs
+--
+
+ xfPMAMInterval24h4QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 1 }
+
+ xfPMAMInterval24h8QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 2 }
+
+ xfPMAMInterval24h16QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 3 }
+
+ xfPMAMInterval24h32QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 4 }
+
+ xfPMAMInterval24h64QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 5 }
+
+ xfPMAMInterval24h128QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 6 }
+
+ xfPMAMInterval24h256QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 7 }
+
+ xfPMAMInterval24h512QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 8 }
+
+ xfPMAMInterval24hValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates whether the data
+ for this interval is valid."
+ ::= { xfRLPMAMInterval24hEntry 9 }
+
+ xfPMAMInterval24h1024QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 10 }
+
+ xfPMAMInterval24h4QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 11 }
+
+ xfPMAMInterval24h8QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 12 }
+
+ xfPMAMInterval24h16QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 13 }
+
+ xfPMAMInterval24h32QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 14 }
+
+ xfPMAMInterval24h64QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 15 }
+
+ xfPMAMInterval24h128QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 16 }
+
+ xfPMAMInterval24h256QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 17 }
+
+ xfPMAMInterval24h512QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 18 }
+
+ xfPMAMInterval24h1024QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval24hEntry 19 }
+
+------------------------------------------------------------------------------
+-- xfRLPMAMCurrent15mTable
+------------------------------------------------------------------------------
+
+ xfRLPMAMCurrent15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMAMCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TBD"
+ ::= { xfRadioLinkPtpTerminalObjects 19 }
+
+ xfRLPMAMCurrent15mEntry OBJECT-TYPE
+ SYNTAX XfRLPMAMCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table."
+ INDEX { ifIndex }
+ ::= { xfRLPMAMCurrent15mTable 1 }
+
+ XfRLPMAMCurrent15mEntry ::=
+ SEQUENCE {
+ xfPMAMCurrent15m4QAM
+ PerfCurrentCount,
+ xfPMAMCurrent15m8QAM
+ PerfCurrentCount,
+ xfPMAMCurrent15m16QAM
+ PerfCurrentCount,
+ xfPMAMCurrent15m32QAM
+ PerfCurrentCount,
+ xfPMAMCurrent15m64QAM
+ PerfCurrentCount,
+ xfPMAMCurrent15m128QAM
+ PerfCurrentCount,
+ xfPMAMCurrent15m256QAM
+ PerfCurrentCount,
+ xfPMAMCurrent15m512QAM
+ PerfCurrentCount,
+ xfPMAMCurrent15m1024QAM
+ PerfCurrentCount,
+ xfPMAMCurrent15m4QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent15m8QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent15m16QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent15m32QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent15m64QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent15m128QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent15m256QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent15m512QAMEnRLB
+ PerfCurrentCount,
+ xfPMAMCurrent15m1024QAMEnRLB
+ PerfCurrentCount
+ }
+
+--
+-- The xfRLPMAMCurrent15mTable MOs
+--
+ xfPMAMCurrent15m4QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 1 }
+
+ xfPMAMCurrent15m8QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 2 }
+
+ xfPMAMCurrent15m16QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 3 }
+
+ xfPMAMCurrent15m32QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 4 }
+
+ xfPMAMCurrent15m64QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 5 }
+
+ xfPMAMCurrent15m128QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 6 }
+
+ xfPMAMCurrent15m256QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 7 }
+
+ xfPMAMCurrent15m512QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 8 }
+
+ xfPMAMCurrent15m1024QAM OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 9 }
+
+ xfPMAMCurrent15m4QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 10 }
+
+ xfPMAMCurrent15m8QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 11 }
+
+ xfPMAMCurrent15m16QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 12 }
+
+ xfPMAMCurrent15m32QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 13 }
+
+ xfPMAMCurrent15m64QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 14 }
+
+ xfPMAMCurrent15m128QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 15 }
+
+ xfPMAMCurrent15m256QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 16 }
+
+ xfPMAMCurrent15m512QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 17 }
+
+ xfPMAMCurrent15m1024QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Valid interval time since reset.
+ "
+ ::= { xfRLPMAMCurrent15mEntry 18 }
+
+------------------------------------------------------------------------------
+-- xfRLPMAMInterval15mTable
+------------------------------------------------------------------------------
+
+ xfRLPMAMInterval15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMAMInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TBD"
+ ::= { xfRadioLinkPtpTerminalObjects 20 }
+
+ xfRLPMAMInterval15mEntry OBJECT-TYPE
+ SYNTAX XfRLPMAMInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table."
+ INDEX { ifIndex, xfPMAMInterval15mIntervalNumber }
+ ::= { xfRLPMAMInterval15mTable 1 }
+
+ XfRLPMAMInterval15mEntry ::=
+ SEQUENCE {
+ xfPMAMInterval15mIntervalNumber
+ Integer32,
+ xfPMAMInterval15m4QAM
+ PerfIntervalCount,
+ xfPMAMInterval15m8QAM
+ PerfIntervalCount,
+ xfPMAMInterval15m16QAM
+ PerfIntervalCount,
+ xfPMAMInterval15m32QAM
+ PerfIntervalCount,
+ xfPMAMInterval15m64QAM
+ PerfIntervalCount,
+ xfPMAMInterval15m128QAM
+ PerfIntervalCount,
+ xfPMAMInterval15m256QAM
+ PerfIntervalCount,
+ xfPMAMInterval15m512QAM
+ PerfIntervalCount,
+ xfPMAMInterval15mValidData
+ TruthValue,
+ xfPMAMInterval15m1024QAM
+ PerfIntervalCount,
+ xfPMAMInterval15m4QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval15m8QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval15m16QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval15m32QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval15m64QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval15m128QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval15m256QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval15m512QAMEnRLB
+ PerfIntervalCount,
+ xfPMAMInterval15m1024QAMEnRLB
+ PerfIntervalCount
+ }
+
+--
+-- The xfRLPMAMInterval15mTable MOs
+--
+ xfPMAMInterval15mIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the interval for which
+ the set of statistics is available. The interval identified by 1
+ is the most recently completed 15 minute interval, and the interval
+ identified by N is the interval immediately preceding the one
+ identified by N-1."
+ ::= { xfRLPMAMInterval15mEntry 1 }
+
+ xfPMAMInterval15m4QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 2 }
+
+ xfPMAMInterval15m8QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 3 }
+
+ xfPMAMInterval15m16QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 4 }
+
+ xfPMAMInterval15m32QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 5 }
+
+ xfPMAMInterval15m64QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 6 }
+
+ xfPMAMInterval15m128QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 7 }
+
+ xfPMAMInterval15m256QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 8 }
+
+ xfPMAMInterval15m512QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 9 }
+
+ xfPMAMInterval15mValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates whether the data
+ for this interval is valid."
+ ::= { xfRLPMAMInterval15mEntry 10 }
+
+ xfPMAMInterval15m1024QAM OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 11 }
+
+ xfPMAMInterval15m4QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 12 }
+
+ xfPMAMInterval15m8QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 13 }
+
+ xfPMAMInterval15m16QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 14 }
+
+ xfPMAMInterval15m32QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 15 }
+
+ xfPMAMInterval15m64QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 16 }
+
+ xfPMAMInterval15m128QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 17 }
+
+ xfPMAMInterval15m256QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 18 }
+
+ xfPMAMInterval15m512QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 19 }
+
+ xfPMAMInterval15m1024QAMEnRLB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interval count."
+ ::= { xfRLPMAMInterval15mEntry 20 }
+
+------------------------------------------------------------------------------
+-- xfRLPtpTerminalCapacityLicenseTable
+------------------------------------------------------------------------------
+
+ xfRLPtpTerminalCapacityLicenseTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPtpTerminalCapacityLicenseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TBD"
+ ::= { xfRadioLinkPtpTerminalObjects 21 }
+
+ xfRLPtpTerminalCapacityLicenseEntry OBJECT-TYPE
+ SYNTAX XfRLPtpTerminalCapacityLicenseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table."
+ INDEX { entLogicalIndex, xfTermRowIndex }
+ ::= { xfRLPtpTerminalCapacityLicenseTable 1 }
+
+ XfRLPtpTerminalCapacityLicenseEntry ::=
+ SEQUENCE
+ {
+ xfTermCapacityLicenseRange INTEGER,
+ xfTermMaxCapacityRange Integer32,
+ xfTermMaxTribCapacityRange Integer32
+ }
+
+--
+-- The xfRLPtpTerminalCapacityLicenseTable MOs
+--
+ xfTermCapacityLicenseRange OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ vr0(0),
+ vr10(1),
+ vr25(2),
+ vr50(3),
+ vr100(4),
+ vr15(5),
+ vr30(6),
+ vr60(7),
+ vr125(8),
+ vr200(9),
+ vr350(10),
+ vr4(11),
+ vr500(12),
+ vr150(13),
+ vr250(14),
+ vr300(15),
+ vr400(16),
+ vr450(17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "xfTermCapacityLicenseRange"
+ ::= { xfRLPtpTerminalCapacityLicenseEntry 1 }
+
+ xfTermMaxCapacityRange OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "TermMaxCapacityRange"
+ ::= { xfRLPtpTerminalCapacityLicenseEntry 2 }
+
+ xfTermMaxTribCapacityRange OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "xfTermMaxTribCapacityRange"
+ ::= { xfRLPtpTerminalCapacityLicenseEntry 3 }
+
+------------------------------------------------------------------------------
+-- xfRLPMSDCGainCurrent15mTable
+------------------------------------------------------------------------------
+
+ xfRLPMSDCGainCurrent15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMSDCGainCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This table monitors the time spent in each SDC gain value in the current 15 minute period.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 22 }
+
+ xfRLPMSDCGainCurrent15mEntry OBJECT-TYPE
+ SYNTAX XfRLPMSDCGainCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Entry in xfRLPMSDCGainCurrent15mTable.
+ "
+ INDEX { ifIndex }
+ ::= { xfRLPMSDCGainCurrent15mTable 1 }
+
+ XfRLPMSDCGainCurrent15mEntry ::=
+ SEQUENCE
+ {
+ xfPMSDCGainCurrent15m0005dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent15m0510dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent15m1015dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent15m1520dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent15m2025dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent15m2530dB
+ PerfCurrentCount
+ }
+
+--
+-- xfRLPMSDCGainCurrent15mTable MOs
+--
+ xfPMSDCGainCurrent15m0005dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent15mEntry 1 }
+
+ xfPMSDCGainCurrent15m0510dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent15mEntry 2 }
+
+ xfPMSDCGainCurrent15m1015dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent15mEntry 3 }
+
+ xfPMSDCGainCurrent15m1520dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent15mEntry 4 }
+
+ xfPMSDCGainCurrent15m2025dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent15mEntry 5 }
+
+ xfPMSDCGainCurrent15m2530dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent15mEntry 6 }
+
+------------------------------------------------------------------------------
+-- xfRLPMSDCGainInterval15mTable
+------------------------------------------------------------------------------
+
+ xfRLPMSDCGainInterval15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMSDCGainInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This table collects the time spent in each SDC gain value for the 15 minute intervals.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 23 }
+
+ xfRLPMSDCGainInterval15mEntry OBJECT-TYPE
+ SYNTAX XfRLPMSDCGainInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Entry in xfRLPMSDCGainInterval15mTable.
+ "
+ INDEX { ifIndex, xfPMSDCGainInterval15mIntervalNumber }
+ ::= { xfRLPMSDCGainInterval15mTable 1 }
+
+ XfRLPMSDCGainInterval15mEntry ::=
+ SEQUENCE
+ {
+ xfPMSDCGainInterval15mIntervalNumber
+ Integer32,
+ xfPMSDCGainInterval15m0005dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval15m0510dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval15m1015dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval15m1520dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval15m2025dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval15m2530dB
+ PerfIntervalCount
+ }
+
+--
+-- xfRLPMSDCGainInterval15mTable MOs
+--
+ xfPMSDCGainInterval15mIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ A number between 1 and 96, which identifies the interval for which the set of statistics is available.
+ The interval identified by 1 is the most recently completed 15 minute interval, and the interval
+ identified by N is the interval immediately preceding the one identified by N-1.
+ "
+ ::= { xfRLPMSDCGainInterval15mEntry 1 }
+
+ xfPMSDCGainInterval15m0005dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.
+ "
+ ::= { xfRLPMSDCGainInterval15mEntry 2 }
+
+ xfPMSDCGainInterval15m0510dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.
+ "
+ ::= { xfRLPMSDCGainInterval15mEntry 3 }
+
+ xfPMSDCGainInterval15m1015dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.
+ "
+ ::= { xfRLPMSDCGainInterval15mEntry 4 }
+
+ xfPMSDCGainInterval15m1520dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.
+ "
+ ::= { xfRLPMSDCGainInterval15mEntry 5 }
+
+ xfPMSDCGainInterval15m2025dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.
+ "
+ ::= { xfRLPMSDCGainInterval15mEntry 6 }
+
+ xfPMSDCGainInterval15m2530dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.
+ "
+ ::= { xfRLPMSDCGainInterval15mEntry 7 }
+
+------------------------------------------------------------------------------
+-- xfRLPMSDCGainCurrent24hTable
+------------------------------------------------------------------------------
+
+ xfRLPMSDCGainCurrent24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMSDCGainCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This table monitors the time spent in each SDC gain value in the current 24 hours period.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 24 }
+
+ xfRLPMSDCGainCurrent24hEntry OBJECT-TYPE
+ SYNTAX XfRLPMSDCGainCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Entry in xfRLPMSDCGainCurrent24hTable.
+ "
+ INDEX { ifIndex }
+ ::= { xfRLPMSDCGainCurrent24hTable 1 }
+
+ XfRLPMSDCGainCurrent24hEntry ::=
+ SEQUENCE
+ {
+ xfPMSDCGainCurrent24h0005dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent24h0510dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent24h1015dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent24h1520dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent24h2025dB
+ PerfCurrentCount,
+ xfPMSDCGainCurrent24h2530dB
+ PerfCurrentCount
+ }
+
+--
+-- xfRLPMSDCGainCurrent24hTable MOs
+--
+ xfPMSDCGainCurrent24h0005dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent24hEntry 1 }
+
+ xfPMSDCGainCurrent24h0510dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent24hEntry 2 }
+
+ xfPMSDCGainCurrent24h1015dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent24hEntry 3 }
+
+ xfPMSDCGainCurrent24h1520dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent24hEntry 4 }
+
+ xfPMSDCGainCurrent24h2025dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent24hEntry 5 }
+
+ xfPMSDCGainCurrent24h2530dB OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.
+ "
+ ::= { xfRLPMSDCGainCurrent24hEntry 6 }
+
+------------------------------------------------------------------------------
+-- xfRLPMSDCGainInterval24hTable
+------------------------------------------------------------------------------
+
+ xfRLPMSDCGainInterval24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMSDCGainInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This table collects the time spent in each SDC gain value for the 24 hours interval.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 25 }
+
+ xfRLPMSDCGainInterval24hEntry OBJECT-TYPE
+ SYNTAX XfRLPMSDCGainInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Entry in xfRLPMSDCGainInterval24hTable.
+ "
+ INDEX { ifIndex }
+ ::= { xfRLPMSDCGainInterval24hTable 1 }
+
+ XfRLPMSDCGainInterval24hEntry ::=
+ SEQUENCE
+ {
+ xfPMSDCGainInterval24h0005dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval24h0510dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval24h1015dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval24h1520dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval24h2025dB
+ PerfIntervalCount,
+ xfPMSDCGainInterval24h2530dB
+ PerfIntervalCount
+ }
+
+--
+-- xfRLPMSDCGainInterval24hTable MOs
+--
+
+ xfPMSDCGainInterval24h0005dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.
+ "
+ ::= { xfRLPMSDCGainInterval24hEntry 1 }
+
+ xfPMSDCGainInterval24h0510dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.
+ "
+ ::= { xfRLPMSDCGainInterval24hEntry 2 }
+
+ xfPMSDCGainInterval24h1015dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.
+ "
+ ::= { xfRLPMSDCGainInterval24hEntry 3 }
+
+ xfPMSDCGainInterval24h1520dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.
+ "
+ ::= { xfRLPMSDCGainInterval24hEntry 4 }
+
+ xfPMSDCGainInterval24h2025dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.
+ "
+ ::= { xfRLPMSDCGainInterval24hEntry 5 }
+
+ xfPMSDCGainInterval24h2530dB OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.
+ "
+ ::= { xfRLPMSDCGainInterval24hEntry 6 }
+
+------------------------------------------------------------------------------
+-- xfRLPMSDCGainConfigTable
+------------------------------------------------------------------------------
+
+ xfRLPMSDCGainConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLPMSDCGainConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ xfRLPMSDCGainConfigTable contains thresholds for setting and resetting alarms for SDC Gain PM data in SDC current and interval tables.
+ "
+ ::= { xfRadioLinkPtpTerminalObjects 26 }
+
+ xfRLPMSDCGainConfigEntry OBJECT-TYPE
+ SYNTAX XfRLPMSDCGainConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Entry in xfRLPMSDCGainConfigTable.
+ "
+ INDEX { ifIndex }
+ ::= { xfRLPMSDCGainConfigTable 1 }
+
+ XfRLPMSDCGainConfigEntry ::=
+ SEQUENCE
+ {
+ xfPMSDCGainSetThreshold15m
+ Integer32,
+ xfPMSDCGainSetThreshold24h
+ Integer32,
+ xfPMSDCGainResetThreshold15m
+ Integer32,
+ xfPMSDCGainStatus
+ BITS
+ }
+
+--
+-- xfRLPMSDCGainConfigTable MOs
+--
+
+ xfPMSDCGainSetThreshold15m OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ The 15 minute set threshold for the lowest SDC Gain interval: 0 - 0.5 dB.
+ Default value is 180.
+ "
+ ::= { xfRLPMSDCGainConfigEntry 1 }
+
+ xfPMSDCGainSetThreshold24h OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ The 24 hour set threshold for the lowest SDC Gain interval: 0 - 0.5 dB.
+ Default value is 1500.
+ "
+ ::= { xfRLPMSDCGainConfigEntry 2 }
+
+ xfPMSDCGainResetThreshold15m OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ The 15 minute reset threshold for the lowest SDC Gain interval: 0 - 0.5 dB.
+ Default value is 20.
+ "
+ ::= { xfRLPMSDCGainConfigEntry 3 }
+
+ xfPMSDCGainStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ sdcGain15m(0),
+ sdcGain24h(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Threshold crossing SDC alarm status.
+ "
+ ::= { xfRLPMSDCGainConfigEntry 4 }
+
+--
+-- Extended Performance Tables --
+--
+
+--
+-- xfRLExtRFPMConfigTable --
+--
+
+ xfRLExtRFPMConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLExtRFPMConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains the alarm threshold values for RL Extended RF PM.
+ Its index id the RF IF ifIndex."
+ ::= { xfRadioLinkPtpTerminalObjects 27 }
+
+ xfRLExtRFPMConfigEntry OBJECT-TYPE
+ SYNTAX XfRLExtRFPMConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLExtRFPMConfigTable."
+ INDEX { ifIndex } -- RF IF ifIndex
+ ::= { xfRLExtRFPMConfigTable 1 }
+
+ XfRLExtRFPMConfigEntry ::=
+ SEQUENCE
+ {
+ xfExtRFPMRLTS1Threshold Integer32,
+ xfExtRFPMSetThreshold15mRLTS1 Integer32,
+ xfExtRFPMResetThreshold15mRLTS1 Integer32,
+ xfExtRFPMRLTS2Threshold Integer32,
+ xfExtRFPMSetThreshold15mRLTS2 Integer32,
+ xfExtRFPMResetThreshold15mRLTS2 Integer32,
+ xfExtRFPMSetThreshold15mRLTM Integer32,
+ xfExtRFPMResetThreshold15mRLTM Integer32,
+ xfExtRFPMTLTS1Threshold Integer32,
+ xfExtRFPMSetThreshold15mTLTS1 Integer32,
+ xfExtRFPMResetThreshold15mTLTS1 Integer32,
+ xfExtRFPMSetThreshold15mTLTM Integer32,
+ xfExtRFPMResetThreshold15mTLTM Integer32,
+ xfExtRFPMSetThreshold24hRLTS1 Integer32,
+ xfExtRFPMSetThreshold24hRLTS2 Integer32,
+ xfExtRFPMSetThreshold24hRLTM Integer32,
+ xfExtRFPMSetThreshold24hTLTS1 Integer32,
+ xfExtRFPMSetThreshold24hTLTM Integer32,
+ xfExtRFPMStatus BITS,
+ xfExtRFPMView INTEGER
+ }
+
+--
+-- The xfRLExtRFPMConfigTable MOs
+--
+ xfExtRFPMRLTS1Threshold OBJECT-TYPE
+ SYNTAX Integer32 (-999..-201)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "RLTS1 Alarm Threshold for Minimum RF Input Power.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.1 dBm]
+ Valid for both 15 m & 24 h intervals.
+ If changed current interval PM data must be reset.
+ Always less than RLTS2, xfExtRFPMRLTS2Threshold."
+ DEFVAL {-999}
+ ::= { xfRLExtRFPMConfigEntry 1 }
+
+ xfExtRFPMSetThreshold15mRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 15 minute.
+ Alarm Set threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS1 Alarm Threshold for Minimum RF Input Power
+ in current 15 minute interval.
+ Always greater than alarm Reset, xfExtRFPMResetThreshold15mRLTS1."
+ DEFVAL {150}
+ ::= { xfRLExtRFPMConfigEntry 2 }
+
+ xfExtRFPMResetThreshold15mRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 15 minute.
+ Alarm Reset threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS1 Alarm Threshold for Minimum RF Input Power
+ for entire current 15 minute interval.
+ Always less than alarm Set, xfPMSetThreshold15mRLTS1."
+ DEFVAL {1}
+ ::= { xfRLExtRFPMConfigEntry 3 }
+
+ xfExtRFPMRLTS2Threshold OBJECT-TYPE
+ SYNTAX Integer32 (-998..-200)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "RLTS2 Alarm Threshold for Minimum RF Input Power.
+ RF input level = value/10 dBm.
+ Domain: [-99.8 ... -20.0 dBm]
+ Valid for both 15 m & 24 h intervals.
+ If changed current interval PM data must be reset.
+ Always greater than RLTS1, xfExtRFPMRLTS1Threshold."
+ DEFVAL {-998}
+ ::= { xfRLExtRFPMConfigEntry 4 }
+
+ xfExtRFPMSetThreshold15mRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 15 minute.
+ Alarm Set threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS2 Alarm Threshold for Minimum RF Input Power
+ in current 15 minute interval.
+ Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTS2."
+ DEFVAL {180}
+ ::= { xfRLExtRFPMConfigEntry 5 }
+
+ xfExtRFPMResetThreshold15mRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 15 minute.
+ Alarm Reset threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS2 Alarm Threshold for Minimum RF Input Power
+ for entire current 15 minute interval.
+ Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTS2."
+ DEFVAL {20}
+ ::= { xfRLExtRFPMConfigEntry 6 }
+
+ xfExtRFPMSetThreshold15mRLTM OBJECT-TYPE
+ SYNTAX Integer32 (10..800)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Receive Level Tide Mark (RLTM) 15 minute.
+ Alarm Set threshold for maximum allowed
+ max / min difference of RF Input Power
+ in current 15 minute interval.
+ RF input level = value/10 dB.
+ Domain: [1.0 ... 80.0 dB]
+ Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTM."
+ DEFVAL {800}
+ ::= { xfRLExtRFPMConfigEntry 7 }
+
+ xfExtRFPMResetThreshold15mRLTM OBJECT-TYPE
+ SYNTAX Integer32 (10..800)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Receive Level Tide Mark (RLTM) 15 minute.
+ Alarm Reset threshold for maximum allowed
+ max / min difference of RF Input Power
+ for entire current 15 minute interval.
+ RF input level = value/10 dB.
+ Domain: [1.0 ... 80.0 dB]
+ Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTM."
+ DEFVAL {790}
+ ::= { xfRLExtRFPMConfigEntry 8 }
+
+ xfExtRFPMTLTS1Threshold OBJECT-TYPE
+ SYNTAX Integer32 (-100..45)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "TLTS1 Alarm Threshold for Maximum RF Output Power.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ Valid for both 15 m & 24 h intervals.
+ If changed current interval PM data must be reset."
+ DEFVAL {45}
+ ::= { xfRLExtRFPMConfigEntry 9 }
+
+ xfExtRFPMSetThreshold15mTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
+ Alarm Set threshold in number of seconds that
+ RF Output Power are allowed above the
+ TLTS1 Alarm Threshold for Maximum RF Output Power
+ in current 15 minute interval.
+ Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTS1."
+ DEFVAL {180}
+ ::= { xfRLExtRFPMConfigEntry 10 }
+
+ xfExtRFPMResetThreshold15mTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
+ Alarm Reset threshold in number of seconds that
+ RF Output Power are allowed above the
+ TLTS1 Alarm Threshold for Maximum RF Output Power
+ for entire current 15 minute interval.
+ Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTS1."
+ DEFVAL {20}
+ ::= { xfRLExtRFPMConfigEntry 11 }
+
+ xfExtRFPMSetThreshold15mTLTM OBJECT-TYPE
+ SYNTAX Integer32 (1..145)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level Tide Mark (TLTM) 15 minute.
+ Alarm Set threshold for maximum allowed
+ max / min difference of RF Output Power
+ in current 15 minute interval.
+ RF output level = value dB.
+ Domain: [1 ... 145 dB]
+ Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTM."
+ DEFVAL {145}
+ ::= { xfRLExtRFPMConfigEntry 12 }
+
+ xfExtRFPMResetThreshold15mTLTM OBJECT-TYPE
+ SYNTAX Integer32 (1..145)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level Tide Mark (TLTM) 15 minute.
+ Alarm Reset threshold for maximum allowed
+ max / min difference of RF Output Power
+ for entire current 15 minute interval.
+ RF output level = value dB.
+ Domain: [1 ... 145 dB]
+ Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTM."
+ DEFVAL {144}
+ ::= { xfRLExtRFPMConfigEntry 13 }
+
+ xfExtRFPMSetThreshold24hRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..86400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 24 hour.
+ Alarm Set / Reset threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS1 Alarm Threshold for Minimum RF Input Power
+ in current 24 hour interval."
+ DEFVAL {20}
+ ::= { xfRLExtRFPMConfigEntry 14 }
+
+ xfExtRFPMSetThreshold24hRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (1..86400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 24 hour.
+ Alarm Set / Reset threshold in number of seconds that
+ RF Input Power are allowed below the
+ RLTS2 Alarm Threshold for Minimum RF Input Power
+ in current 24 hour interval."
+ DEFVAL {1500}
+ ::= { xfRLExtRFPMConfigEntry 15 }
+
+ xfExtRFPMSetThreshold24hRLTM OBJECT-TYPE
+ SYNTAX Integer32 (10..800)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Receive Level Tide Mark (RLTM) 24 hour.
+ Alarm Set / Reset threshold for maximum allowed
+ max / min difference of RF Input Power
+ in current 24 hour interval.
+ RF input level = value/10 dB.
+ Domain: [1.0 ... 80.0 dB]"
+ DEFVAL {800}
+ ::= { xfRLExtRFPMConfigEntry 16 }
+
+ xfExtRFPMSetThreshold24hTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (1..86400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Levels 1 Threshold Second (TLTS1) 24 hour.
+ Alarm Set / Reset threshold in number of seconds that
+ RF Output Power are allowed above the
+ TLTS1 Alarm Threshold for Maximum RF Output Power
+ in current 24 hour interval."
+ DEFVAL {1500}
+ ::= { xfRLExtRFPMConfigEntry 17 }
+
+ xfExtRFPMSetThreshold24hTLTM OBJECT-TYPE
+ SYNTAX Integer32 (1..145)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level Tide Mark (TLTM) 24 hour.
+ Alarm Set / Reset threshold for maximum allowed
+ max / min difference of RF Output Power
+ in current 24 hour interval.
+ RF output level = value dB.
+ Domain: [1 ... 145 dB]"
+ DEFVAL {145}
+ ::= { xfRLExtRFPMConfigEntry 18 }
+
+ xfExtRFPMStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ rlts1Counter15m0(0),
+ rlts1Counter15m1(1),
+ rlts1Counter15m2(2),
+
+ rlts2Counter15m0(3),
+ rlts2Counter15m1(4),
+ rlts2Counter15m2(5),
+
+ rltmCounter15m0(6),
+ rltmCounter15m1(7),
+ rltmCounter15m2(8),
+
+ tlts1Counter15m0(9),
+ tlts1Counter15m1(10),
+ tlts1Counter15m2(11),
+
+ tltmCounter15m0(12),
+ tltmCounter15m1(13),
+ tltmCounter15m2(14),
+
+ rlts1Counter24h0(15),
+ rlts1Counter24h1(16),
+ rlts1Counter24h2(17),
+
+ rlts2Counter24h0(18),
+ rlts2Counter24h1(19),
+ rlts2Counter24h2(20),
+
+ rltmCounter24h0(21),
+ rltmCounter24h1(22),
+ rltmCounter24h2(23),
+
+ tlts1Counter24h0(24),
+ tlts1Counter24h1(25),
+ tlts1Counter24h2(26),
+
+ tltmCounter24h0(27),
+ tltmCounter24h1(28),
+ tltmCounter24h2(29)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Threshold alarm status"
+ ::= { xfRLExtRFPMConfigEntry 19 }
+
+ xfExtRFPMView OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ extPmEnable(1),
+ extPmDisable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ Enable/disable visibility of PM tables.
+ Default value: extPmEnable(1)
+ Near end access: read-write
+ Far end access: No access
+ "
+ ::= { xfRLExtRFPMConfigEntry 20 }
+
+--
+-- xfRLExtRFPMCurrent24hTable
+--
+
+ xfRLExtRFPMCurrent24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLExtRFPMCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Current 24h Extended RF PM table.
+ Its index is RF IF ifIndex"
+ ::= { xfRadioLinkPtpTerminalObjects 28 }
+
+ xfRLExtRFPMCurrent24hEntry OBJECT-TYPE
+ SYNTAX XfRLExtRFPMCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLExtRFPMCurrent24hTable."
+ INDEX { ifIndex } --RF IF ifIndex
+ ::= { xfRLExtRFPMCurrent24hTable 1 }
+
+ XfRLExtRFPMCurrent24hEntry ::=
+ SEQUENCE
+ {
+ xfExtRFPMCurrent24hElapsedTime Counter32,
+ xfExtRFPMCurrent24hRLTS1 Integer32,
+ xfExtRFPMCurrent24hRLTS2 Integer32,
+ xfExtRFPMCurrent24hRLMin Integer32,
+ xfExtRFPMCurrent24hRLMax Integer32,
+ xfExtRFPMCurrent24hTLTS1 Integer32,
+ xfExtRFPMCurrent24hTLMin Integer32,
+ xfExtRFPMCurrent24hTLMax Integer32
+ }
+--
+-- The xfRLExtRFPMCurrent24hTable MOs
+--
+
+ xfExtRFPMCurrent24hElapsedTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that have elapsed since the
+ beginning of the current error-measurement period.
+
+ If the current interval exceeds the maximum value,
+ the agent will return the maximum value.
+ "
+ ::= { xfRLExtRFPMCurrent24hEntry 1 }
+
+ xfExtRFPMCurrent24hRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..86400)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 24 hour.
+ Number of seconds that the RF Input Power was below the RLTS1
+ in the current 24 hour interval.
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent24hEntry 2 }
+
+ xfExtRFPMCurrent24hRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..86400)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 24 hour.
+ Number of seconds that the RF Input Power was below the RLTS2
+ in the current 24 hour interval.
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent24hEntry 3 }
+
+ xfExtRFPMCurrent24hRLMin OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Input level in current 24 hour interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent24hEntry 4 }
+
+ xfExtRFPMCurrent24hRLMax OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Input level in current 24 hour interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent24hEntry 5 }
+
+ xfExtRFPMCurrent24hTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..86400)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
+ Number of seconds that the RF Output Power was above the TLTS1
+ in the current 24 hour interval
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent24hEntry 6 }
+
+ xfExtRFPMCurrent24hTLMin OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Output level in current 24 hour interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent24hEntry 7 }
+
+ xfExtRFPMCurrent24hTLMax OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Output level in current 24 hour interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent24hEntry 8 }
+
+--
+-- xfRLExtRFPMInterval24hTable
+--
+
+ xfRLExtRFPMInterval24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLExtRFPMInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval 24h Extended RF PM table.
+ Its index is RF IF ifIndex"
+ ::= { xfRadioLinkPtpTerminalObjects 29 }
+
+ xfRLExtRFPMInterval24hEntry OBJECT-TYPE
+ SYNTAX XfRLExtRFPMInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLExtRFPMInterval24hTable."
+ INDEX { ifIndex } -- RF IF ifIndex
+ ::= { xfRLExtRFPMInterval24hTable 1 }
+
+ XfRLExtRFPMInterval24hEntry ::=
+ SEQUENCE
+ {
+ xfExtRFPMInterval24hRLTS1 Integer32,
+ xfExtRFPMInterval24hRLTS2 Integer32,
+ xfExtRFPMInterval24hRLMin Integer32,
+ xfExtRFPMInterval24hRLMax Integer32,
+ xfExtRFPMInterval24hTLTS1 Integer32,
+ xfExtRFPMInterval24hTLMin Integer32,
+ xfExtRFPMInterval24hTLMax Integer32,
+ xfExtRFPMInterval24hValidData TruthValue
+ }
+
+--
+-- The xfRLExtRFPMInterval24hTable MOs
+--
+ xfExtRFPMInterval24hRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..86400)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 24 hour.
+ Number of seconds that the RF Input Power was below the RLTS1
+ in the previous 24 hour interval.
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval24hEntry 1 }
+
+ xfExtRFPMInterval24hRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..86400)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 24 hour.
+ Number of seconds that the RF Input Power was below the RLTS2
+ in the previous 24 hour interval.
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval24hEntry 2 }
+
+ xfExtRFPMInterval24hRLMin OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Input level in previous 24 hour interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval24hEntry 3 }
+
+ xfExtRFPMInterval24hRLMax OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Input level in previous 24 hour interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval24hEntry 4 }
+
+ xfExtRFPMInterval24hTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..86400)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
+ Number of seconds that the RF Output Power was above the TLTS1
+ in the previous 24 hour interval
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval24hEntry 5 }
+
+ xfExtRFPMInterval24hTLMin OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Output level in previous 24 hour interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval24hEntry 6 }
+
+ xfExtRFPMInterval24hTLMax OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Output level in previous 24 hour interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval24hEntry 7 }
+
+ xfExtRFPMInterval24hValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates whether the data
+ for this interval is valid."
+ ::= { xfRLExtRFPMInterval24hEntry 8 }
+
+--
+-- xfRLExtRFPMCurrent15mTable
+--
+
+ xfRLExtRFPMCurrent15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLExtRFPMCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Current 15m Extended RF PM table.
+ Its index is RF IF ifIndex"
+ ::= { xfRadioLinkPtpTerminalObjects 30 }
+
+ xfRLExtRFPMCurrent15mEntry OBJECT-TYPE
+ SYNTAX XfRLExtRFPMCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table."
+ INDEX { ifIndex } -- RF IF ifIndex
+ ::= { xfRLExtRFPMCurrent15mTable 1 }
+
+ XfRLExtRFPMCurrent15mEntry ::=
+ SEQUENCE
+ {
+ xfExtRFPMCurrent15mElapsedTime Counter32,
+ xfExtRFPMCurrent15mRLTS1 Integer32,
+ xfExtRFPMCurrent15mRLTS2 Integer32,
+ xfExtRFPMCurrent15mRLMin Integer32,
+ xfExtRFPMCurrent15mRLMax Integer32,
+ xfExtRFPMCurrent15mTLTS1 Integer32,
+ xfExtRFPMCurrent15mTLMin Integer32,
+ xfExtRFPMCurrent15mTLMax Integer32
+ }
+
+--
+-- The xfRLExtRFPMCurrent15mTable MOs
+--
+
+ xfExtRFPMCurrent15mElapsedTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that have elapsed since the beginning of
+ the current error-measurement period.
+ "
+ ::= { xfRLExtRFPMCurrent15mEntry 1 }
+
+ xfExtRFPMCurrent15mRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..900)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 15 minute
+ Number of seconds that the RF Input Power was below the RLTS1
+ in the current 15 minute interval.
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent15mEntry 2 }
+
+ xfExtRFPMCurrent15mRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..900)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 15 minute
+ Number of seconds that the RF Input Power was below the RLTS2
+ in the current 15 minute interval.
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent15mEntry 3 }
+
+ xfExtRFPMCurrent15mRLMin OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Input level in current 15 minute interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent15mEntry 4 }
+
+ xfExtRFPMCurrent15mRLMax OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Input level in current 15 minute interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent15mEntry 5 }
+
+ xfExtRFPMCurrent15mTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..900)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level 1 Threshold Second (TLTS1) 15 minute
+ Number of seconds that the RF Output Power was above the TLTS1
+ in the current 15 minute interval
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent15mEntry 6 }
+
+ xfExtRFPMCurrent15mTLMin OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Output level in current 15 minute interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent15mEntry 7 }
+
+ xfExtRFPMCurrent15mTLMax OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Output level in current 15 minute interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMCurrent15mEntry 8 }
+
+--
+-- xfRLExtRFPMInterval15mTable
+--
+
+ xfRLExtRFPMInterval15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLExtRFPMInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval 15m Extended RF PM table.
+ Its index is RF IF ifIndex"
+ ::= { xfRadioLinkPtpTerminalObjects 31 }
+
+ xfRLExtRFPMInterval15mEntry OBJECT-TYPE
+ SYNTAX XfRLExtRFPMInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table."
+ INDEX { ifIndex, xfExtRFPMInterval15mIntervalNumber } -- RF IF ifIndex
+ ::= { xfRLExtRFPMInterval15mTable 1 }
+
+ XfRLExtRFPMInterval15mEntry ::=
+ SEQUENCE
+ {
+ xfExtRFPMInterval15mIntervalNumber Integer32,
+ xfExtRFPMInterval15mRLTS1 Integer32,
+ xfExtRFPMInterval15mRLTS2 Integer32,
+ xfExtRFPMInterval15mRLMin Integer32,
+ xfExtRFPMInterval15mRLMax Integer32,
+ xfExtRFPMInterval15mTLTS1 Integer32,
+ xfExtRFPMInterval15mTLMin Integer32,
+ xfExtRFPMInterval15mTLMax Integer32,
+ xfExtRFPMInterval15mValidData TruthValue
+ }
+
+--
+-- The xfRLExtRFPMInterval15mTable MOs
+--
+ xfExtRFPMInterval15mIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the interval for which
+ the set of statistics is available. The interval identified by 1
+ is the most recently completed 15 minute interval, and the interval
+ identified by N is the interval immediately preceding the one
+ identified by N-1."
+ ::= { xfRLExtRFPMInterval15mEntry 1 }
+
+ xfExtRFPMInterval15mRLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..900)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 1 Threshold Second (RLTS1) 15 minute
+ Number of seconds that the RF Input Power was below the RLTS1
+ in the previous 15 minute interval.
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval15mEntry 2 }
+
+ xfExtRFPMInterval15mRLTS2 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..900)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Received Level 2 Threshold Second (RLTS2) 15 minute
+ Number of seconds that the RF Input Power was below the RLTS2
+ in the previous 15 minute interval.
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval15mEntry 3 }
+
+ xfExtRFPMInterval15mRLMin OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Input level in previous 15 minute interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval15mEntry 4 }
+
+ xfExtRFPMInterval15mRLMax OBJECT-TYPE
+ SYNTAX Integer32 (-999..-200|0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Input level in previous 15 minute interval.
+ RF input level = value/10 dBm.
+ Domain: [-99.9 ... -20.0 dBm]
+ 0 (zero) indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval15mEntry 5 }
+
+ xfExtRFPMInterval15mTLTS1 OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..900)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmitted Level 1 Threshold Second (TLTS1) 15 minute
+ Number of seconds that the RF Output Power was above the TLTS1
+ in the previous 15 minute interval
+ -1 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval15mEntry 6 }
+
+ xfExtRFPMInterval15mTLMin OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min RF Output level in previous 15 minute interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval15mEntry 7 }
+
+ xfExtRFPMInterval15mTLMax OBJECT-TYPE
+ SYNTAX Integer32 (-100..45|255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max RF Output level in previous 15 minute interval.
+ RF output level = value dBm.
+ Domain: [-100 ... 45 dBm]
+ 255 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRFPMInterval15mEntry 8 }
+
+ xfExtRFPMInterval15mValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this interval is valid."
+ ::= { xfRLExtRFPMInterval15mEntry 9 }
+
+--
+-- xfRLExtRAUPMCurrent24hTable
+--
+
+ xfRLExtRAUPMCurrent24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLExtRAUPMCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Current 24h Extended RAU PM table.
+ Its index is RAU IF ifIndex"
+ ::= { xfRadioLinkPtpTerminalObjects 32 }
+
+ xfRLExtRAUPMCurrent24hEntry OBJECT-TYPE
+ SYNTAX XfRLExtRAUPMCurrent24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLExtRAUPMCurrent24hTable."
+ INDEX { ifIndex } --RAU IF ifIndex
+ ::= { xfRLExtRAUPMCurrent24hTable 1 }
+
+ XfRLExtRAUPMCurrent24hEntry ::=
+ SEQUENCE {
+ xfExtRAUPMCurrent24hElapsedTime Counter32,
+ xfExtRAUPMCurrent24hMSEMin Integer32,
+ xfExtRAUPMCurrent24hMSEMax Integer32,
+ xfExtRAUPMCurrent24hXPIMin Integer32,
+ xfExtRAUPMCurrent24hXPIMax Integer32
+ }
+
+--
+-- The xfRLExtRAUPMCurrent24hTable MOs
+--
+
+ xfExtRAUPMCurrent24hElapsedTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that have elapsed since the
+ beginning of the current error-measurement period.
+
+ If the current interval exceeds the maximum value,
+ the agent will return the maximum value.
+ "
+ ::= { xfRLExtRAUPMCurrent24hEntry 1 }
+
+ xfExtRAUPMCurrent24hMSEMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min MSE level
+ in current 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMCurrent24hEntry 2 }
+
+ xfExtRAUPMCurrent24hMSEMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max MSE level
+ in current 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMCurrent24hEntry 3 }
+
+ xfExtRAUPMCurrent24hXPIMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min Cross-Polar Interference (XPI) level
+ in current 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMCurrent24hEntry 4 }
+
+ xfExtRAUPMCurrent24hXPIMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max Cross-Polar Interference (XPI) level
+ in current 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMCurrent24hEntry 5 }
+
+--
+-- xfRLExtRAUPMInterval24hTable
+--
+
+ xfRLExtRAUPMInterval24hTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLExtRAUPMInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval 24h Extended RAU PM table.
+ Its index is RAU IF ifIndex"
+ ::= { xfRadioLinkPtpTerminalObjects 33 }
+
+ xfRLExtRAUPMInterval24hEntry OBJECT-TYPE
+ SYNTAX XfRLExtRAUPMInterval24hEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLExtRAUPMInterval24hTable."
+ INDEX { ifIndex } -- RAU IF ifIndex
+ ::= { xfRLExtRAUPMInterval24hTable 1 }
+
+ XfRLExtRAUPMInterval24hEntry ::=
+ SEQUENCE {
+ xfExtRAUPMInterval24hMSEMin Integer32,
+ xfExtRAUPMInterval24hMSEMax Integer32,
+ xfExtRAUPMInterval24hXPIMin Integer32,
+ xfExtRAUPMInterval24hXPIMax Integer32,
+ xfExtRAUPMInterval24hValidData TruthValue
+ }
+
+--
+-- The xfRLExtRAUPMInterval24hTable MOs
+--
+
+ xfExtRAUPMInterval24hMSEMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min MSE level
+ in previous 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMInterval24hEntry 1 }
+
+ xfExtRAUPMInterval24hMSEMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max MSE level
+ in previous 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMInterval24hEntry 2 }
+
+ xfExtRAUPMInterval24hXPIMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min Cross-Polar Interference (XPI) level
+ in previous 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMInterval24hEntry 3 }
+
+ xfExtRAUPMInterval24hXPIMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max Cross-Polar Interference (XPI) level
+ in previous 24 hour interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMInterval24hEntry 4 }
+
+ xfExtRAUPMInterval24hValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates whether the data
+ for this interval is valid."
+ ::= { xfRLExtRAUPMInterval24hEntry 5 }
+
+--
+-- xfRLExtRAUPMCurrent15mTable --
+--
+
+ xfRLExtRAUPMCurrent15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLExtRAUPMCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Current 15m Extended RAU PM table.
+ Its index is RF IF ifIndex"
+ ::= { xfRadioLinkPtpTerminalObjects 34 }
+
+ xfRLExtRAUPMCurrent15mEntry OBJECT-TYPE
+ SYNTAX XfRLExtRAUPMCurrent15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLExtRAUPMCurrent15mTable."
+ INDEX { ifIndex } --RAU IF ifIndex
+ ::= { xfRLExtRAUPMCurrent15mTable 1 }
+
+ XfRLExtRAUPMCurrent15mEntry ::=
+ SEQUENCE {
+ xfExtRAUPMCurrent15mElapsedTime Counter32,
+ xfExtRAUPMCurrent15mMSEMin Integer32,
+ xfExtRAUPMCurrent15mMSEMax Integer32,
+ xfExtRAUPMCurrent15mXPIMin Integer32,
+ xfExtRAUPMCurrent15mXPIMax Integer32
+ }
+
+--
+-- The xfRLExtRAUPMInterval15mTable MOs
+--
+
+ xfExtRAUPMCurrent15mElapsedTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that have elapsed since the
+ beginning of the current error-measurement period.
+
+ If the current interval exceeds the maximum value,
+ the agent will return the maximum value.
+ "
+ ::= { xfRLExtRAUPMCurrent15mEntry 1 }
+
+ xfExtRAUPMCurrent15mMSEMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min MSE level
+ in current 15 mimute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMCurrent15mEntry 2 }
+
+ xfExtRAUPMCurrent15mMSEMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max MSE level
+ in current 15 mimute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMCurrent15mEntry 3 }
+
+ xfExtRAUPMCurrent15mXPIMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min Cross-Polar Interference (XPI) level
+ in current 15 mimute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMCurrent15mEntry 4 }
+
+ xfExtRAUPMCurrent15mXPIMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max Cross-Polar Interference (XPI) level
+ in current 15 mimute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMCurrent15mEntry 5 }
+
+--
+-- xfRLExtRAUPMInterval15mTable
+--
+
+ xfRLExtRAUPMInterval15mTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XfRLExtRAUPMInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval 15 Extended RAU PM table.
+ Its index is RAU IF ifIndex"
+ ::= { xfRadioLinkPtpTerminalObjects 35 }
+
+ xfRLExtRAUPMInterval15mEntry OBJECT-TYPE
+ SYNTAX XfRLExtRAUPMInterval15mEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the xfRLExtRAUPMInterval15mTable."
+ INDEX { ifIndex, xfExtRAUPMInterval15mIntervalNumber} -- RAU IF ifIndex
+ ::= { xfRLExtRAUPMInterval15mTable 1 }
+
+ XfRLExtRAUPMInterval15mEntry ::=
+ SEQUENCE
+ {
+ xfExtRAUPMInterval15mIntervalNumber Integer32,
+ xfExtRAUPMInterval15mMSEMin Integer32,
+ xfExtRAUPMInterval15mMSEMax Integer32,
+ xfExtRAUPMInterval15mXPIMin Integer32,
+ xfExtRAUPMInterval15mXPIMax Integer32,
+ xfExtRAUPMInterval15mValidData TruthValue
+ }
+
+--
+-- The xfRLExtRAUPMInterval15mTable MOs
+--
+
+ xfExtRAUPMInterval15mIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the interval for which
+ the set of statistics is available. The interval identified by 1
+ is the most recently completed 15 minute interval, and the interval
+ identified by N is the interval immediately preceding the one
+ identified by N-1."
+ ::= { xfRLExtRAUPMInterval15mEntry 1 }
+
+ xfExtRAUPMInterval15mMSEMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min MSE level
+ in previous 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMInterval15mEntry 2 }
+
+ xfExtRAUPMInterval15mMSEMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max MSE level
+ in previous 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMInterval15mEntry 3 }
+
+ xfExtRAUPMInterval15mXPIMin OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Min Cross-Polar Interference (XPI) level
+ in previous 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMInterval15mEntry 4 }
+
+ xfExtRAUPMInterval15mXPIMax OBJECT-TYPE
+ SYNTAX Integer32 (-1000..1000|2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate Max Cross-Polar Interference (XPI) level
+ in previous 15 minute interval.
+ Input level = value/10 dB.
+ Domain: [-100.0 ... 100.0 dB]
+ 2000 indicates invalid value.
+ The instances are reset by:
+ * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
+ * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
+ ::= { xfRLExtRAUPMInterval15mEntry 5 }
+
+ xfExtRAUPMInterval15mValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates whether the data
+ for this interval is valid."
+ ::= { xfRLExtRAUPMInterval15mEntry 6 }
+
+--
+-- Conformance
+--
+
+ xfRadioLinkPtpTerminalCompliances OBJECT IDENTIFIER
+ ::= { xfRadioLinkPtpTerminalConformance 1 }
+
+ xfRadioLinkPtpTerminalGroups OBJECT IDENTIFIER
+ ::= { xfRadioLinkPtpTerminalConformance 2 }
+
+ xfRadioLinkPtpTerminalFullCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities which implement everything."
+ MODULE -- This Module
+ MANDATORY-GROUPS { xfRadioLinkPtpTerminalCompleteGroup }
+ ::= { xfRadioLinkPtpTerminalCompliances 1 }
+
+ xfRadioLinkPtpTerminalCompleteGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xfTermId,
+ xfTermType,
+ xfTermProtection,
+ xfTermCapacity,
+ xfTermCapacityCapability,
+ xfTermModulation,
+ xfTermModulationCapability,
+ xfTermRestore,
+ xfTermAlarmSeverity,
+ xfTermTrapEnable,
+ xfTermAsPort,
+ xfTermRemoteIdCheck,
+ xfTermRemoteId,
+ xfTermPreset,
+ xfTermBerAlarmThreshold,
+ xfTermFadeNotificationTimer,
+ xfTermEquipmentProtectionIndex,
+ xfTermSysName,
+ xfTermChannelMode,
+ xfTermChannelModeCapability,
+ xfTermTrafficAndDCN,
+ xfTermFrameFormat,
+ xfTermFrameFormatCapability,
+ xfTermDCNRadioConfiguration,
+ xfTermDCNRadioCapability,
+ xfTermDCNLineConfiguration,
+ xfTermDCNLineCapability,
+ xfTermFadeNotificationConfiguration,
+ xfTermLineProtection,
+ xfTermOutputPowerOperStatus,
+ xfTermOutputPowerAdminStatus,
+ xfTermAtpcCapability,
+ xfTermTimeElapsed,
+ xfTermCurrentES,
+ xfTermCurrentSES,
+ xfTermCurrentBBE,
+ xfTermCurrentUAS,
+ xfTermCurrentBB,
+ xfTermPerfReset,
+ xfTermTimeElapsedEnRLBExt,
+ xfRLProtectionMode,
+ xfRLProtectionRau1,
+ xfRLProtectionRau2,
+ xfRLActiveTxRadio,
+ xfRLSwitchOverReset,
+ xfRLSwitchRevertiveTx,
+ xfRLProtectionCapability,
+ xfRLTxSwitchOverConfiguration,
+ xfRLLineProtectionStatus,
+ xfRLLineProtectionMode,
+ xfRADIORSAlarms,
+ xfRADIORSPerformanceAlarms,
+ xfPMSetThreshold15mESs,
+ xfPMSetThreshold15mSESs,
+ xfPMSetThreshold15mBBEs,
+ xfPMResetThreshold15mESs,
+ xfPMResetThreshold15mSESs,
+ xfPMResetThreshold15mBBEs,
+ xfPMSetThreshold24hESs,
+ xfPMSetThreshold24hSESs,
+ xfPMSetThreshold24hBBEs,
+ xfPMView,
+ xfPMStatus,
+ xfPMCurrent24hTimeElapsed,
+ xfPMCurrent24hESs,
+ xfPMCurrent24hSESs,
+ xfPMCurrent24hBBEs,
+ xfPMCurrent24hUASs,
+ xfPMCurrent24hBBs,
+ xfPMInterval24hESs,
+ xfPMInterval24hSESs,
+ xfPMInterval24hBBEs,
+ xfPMInterval24hUASs,
+ xfPMInterval24hBBs,
+ xfPMInterval24hRLTS1,
+ xfPMInterval24hRLTS2,
+ xfPMInterval24hRLMin,
+ xfPMInterval24hRLMax,
+ xfPMInterval24hTLTS1,
+ xfPMInterval24hTLMin,
+ xfPMInterval24hTLMax,
+ xfPMInterval24hMSEMin,
+ xfPMInterval24hMSEMax,
+ xfPMInterval24hXPIMin,
+ xfPMInterval24hXPIMax,
+ xfPMInterval24hValidData,
+ xfPMCurrent15mElapsedTime,
+ xfPMCurrent15mESs,
+ xfPMCurrent15mSESs,
+ xfPMCurrent15mBBEs,
+ xfPMCurrent15mUASs,
+ xfPMCurrent15mBBs,
+ xfPMInterval15mIntervalNumber,
+ xfPMInterval15mESs,
+ xfPMInterval15mSESs,
+ xfPMInterval15mBBEs,
+ xfPMInterval15mUASs,
+ xfPMInterval15mBBs,
+ xfPMInterval15mRLTS1,
+ xfPMInterval15mRLTS2,
+ xfPMInterval15mRLMin,
+ xfPMInterval15mRLMax,
+ xfPMInterval15mTLTS1,
+ xfPMInterval15mTLMin,
+ xfPMInterval15mTLMax,
+ xfPMInterval15mMSEMin,
+ xfPMInterval15mMSEMax,
+ xfPMInterval15mXPIMin,
+ xfPMInterval15mXPIMax,
+ xfPMInterval15mValidData,
+ xfTermInterfaces,
+ xfTermInterfacesCapability,
+ xfTermChannelModeOperStatus,
+ xfTermXPICRestore,
+ xfTermTribCapacityActual,
+ xfTermTribCapacityDesired,
+ xfTermBitPipeCapacity,
+ xfTermRowIndex,
+ xfTermCapabilitiesLastChange,
+ xfTermActualRowIndex,
+ xfTermMaxRowIndex,
+ xfTermAdaptiveManualRowIndex,
+ xfTermAdaptiveManualMode,
+ xfTermSpectrumEfficiencyClass,
+ xfTermSpectrumEfficiencyClassCapability,
+ xfTermChannelSpacing,
+ xfTermChannelModulation,
+ xfTermMaxTribCapacity,
+ xfTermDCNCapacity,
+ xfTermValidRow,
+ xfTermMaxCapacity,
+ xfTermFrameFormatType,
+ xfTermFrameFormatRev,
+ xfTermBerAlarmThresholdCapability,
+ xfPMAMSetThreshold15m,
+ xfPMAMSetThreshold24h,
+ xfPMAMResetThreshold15m,
+ xfPMAMStatus,
+ xfPMAMValidData,
+ xfPMAMCurrent24h4QAM,
+ xfPMAMCurrent24h8QAM,
+ xfPMAMCurrent24h16QAM,
+ xfPMAMCurrent24h32QAM,
+ xfPMAMCurrent24h64QAM,
+ xfPMAMCurrent24h128QAM,
+ xfPMAMCurrent24h256QAM,
+ xfPMAMCurrent24h512QAM,
+ xfPMAMCurrent24h1024QAM,
+ xfPMAMInterval24h4QAM,
+ xfPMAMInterval24h8QAM,
+ xfPMAMInterval24h16QAM,
+ xfPMAMInterval24h32QAM,
+ xfPMAMInterval24h64QAM,
+ xfPMAMInterval24h128QAM,
+ xfPMAMInterval24h256QAM,
+ xfPMAMInterval24h512QAM,
+ xfPMAMInterval24hValidData,
+ xfPMAMInterval24h1024QAM,
+ xfPMAMCurrent15m4QAM,
+ xfPMAMCurrent15m8QAM,
+ xfPMAMCurrent15m16QAM,
+ xfPMAMCurrent15m32QAM,
+ xfPMAMCurrent15m64QAM,
+ xfPMAMCurrent15m128QAM,
+ xfPMAMCurrent15m256QAM,
+ xfPMAMCurrent15m512QAM,
+ xfPMAMCurrent15m1024QAM,
+ xfPMAMInterval15mIntervalNumber,
+ xfPMAMInterval15m4QAM,
+ xfPMAMInterval15m8QAM,
+ xfPMAMInterval15m16QAM,
+ xfPMAMInterval15m32QAM,
+ xfPMAMInterval15m64QAM,
+ xfPMAMInterval15m128QAM,
+ xfPMAMInterval15m256QAM,
+ xfPMAMInterval15m512QAM,
+ xfPMAMInterval15mValidData,
+ xfPMAMInterval15m1024QAM,
+ xfPMAMCurrent24h4QAMEnRLB,
+ xfPMAMCurrent24h8QAMEnRLB,
+ xfPMAMCurrent24h16QAMEnRLB,
+ xfPMAMCurrent24h32QAMEnRLB,
+ xfPMAMCurrent24h64QAMEnRLB,
+ xfPMAMCurrent24h128QAMEnRLB,
+ xfPMAMCurrent24h256QAMEnRLB,
+ xfPMAMCurrent24h512QAMEnRLB,
+ xfPMAMCurrent24h1024QAMEnRLB,
+ xfPMAMInterval24h4QAMEnRLB,
+ xfPMAMInterval24h8QAMEnRLB,
+ xfPMAMInterval24h16QAMEnRLB,
+ xfPMAMInterval24h32QAMEnRLB,
+ xfPMAMInterval24h64QAMEnRLB,
+ xfPMAMInterval24h128QAMEnRLB,
+ xfPMAMInterval24h256QAMEnRLB,
+ xfPMAMInterval24h512QAMEnRLB,
+ xfPMAMInterval24h1024QAMEnRLB,
+ xfPMAMCurrent15m4QAMEnRLB,
+ xfPMAMCurrent15m8QAMEnRLB,
+ xfPMAMCurrent15m16QAMEnRLB,
+ xfPMAMCurrent15m32QAMEnRLB,
+ xfPMAMCurrent15m64QAMEnRLB,
+ xfPMAMCurrent15m128QAMEnRLB,
+ xfPMAMCurrent15m256QAMEnRLB,
+ xfPMAMCurrent15m512QAMEnRLB,
+ xfPMAMCurrent15m1024QAMEnRLB,
+ xfPMAMInterval15m4QAMEnRLB,
+ xfPMAMInterval15m8QAMEnRLB,
+ xfPMAMInterval15m16QAMEnRLB,
+ xfPMAMInterval15m32QAMEnRLB,
+ xfPMAMInterval15m64QAMEnRLB,
+ xfPMAMInterval15m128QAMEnRLB,
+ xfPMAMInterval15m256QAMEnRLB,
+ xfPMAMInterval15m512QAMEnRLB,
+ xfPMAMInterval15m1024QAMEnRLB,
+ xfTermIpAddress,
+ xfTermProtectionCapability,
+ xfTermLineProtectionCapability,
+ xfTermTribAllocationActual,
+ xfTermTribAllocationDesired,
+ xfTermAutoRemoveLoopEnable,
+ xfTermCapability,
+ xfTermCapacityLicense,
+ xfTermCapacityLicenseRange,
+ xfTermMaxCapacityRange,
+ xfTermMaxTribCapacityRange,
+ xfTermFadingRates,
+ xfTermFadingRatesCapability,
+ xfTermConfiguredBitPipeCapacity,
+ xfTermTribCapacityConfigured,
+ xfTermPacketMaxCapacity,
+ xfTermPacketMinCapacity,
+ xfPMSDCGainCurrent15m0005dB,
+ xfPMSDCGainCurrent15m0510dB,
+ xfPMSDCGainCurrent15m1015dB,
+ xfPMSDCGainCurrent15m1520dB,
+ xfPMSDCGainCurrent15m2025dB,
+ xfPMSDCGainCurrent15m2530dB,
+ xfPMSDCGainInterval15mIntervalNumber,
+ xfPMSDCGainInterval15m0005dB,
+ xfPMSDCGainInterval15m0510dB,
+ xfPMSDCGainInterval15m1015dB,
+ xfPMSDCGainInterval15m1520dB,
+ xfPMSDCGainInterval15m2025dB,
+ xfPMSDCGainInterval15m2530dB,
+ xfPMSDCGainCurrent24h0005dB,
+ xfPMSDCGainCurrent24h0510dB,
+ xfPMSDCGainCurrent24h1015dB,
+ xfPMSDCGainCurrent24h1520dB,
+ xfPMSDCGainCurrent24h2025dB,
+ xfPMSDCGainCurrent24h2530dB,
+ xfPMSDCGainInterval24h0005dB,
+ xfPMSDCGainInterval24h0510dB,
+ xfPMSDCGainInterval24h1015dB,
+ xfPMSDCGainInterval24h1520dB,
+ xfPMSDCGainInterval24h2025dB,
+ xfPMSDCGainInterval24h2530dB,
+ xfPMSDCGainSetThreshold15m,
+ xfPMSDCGainSetThreshold24h,
+ xfPMSDCGainResetThreshold15m,
+ xfPMSDCGainStatus,
+ xfPMRLTS1Threshold,
+ xfPMSetThreshold15mRLTS1,
+ xfPMResetThreshold15mRLTS1,
+ xfPMRLTS2Threshold,
+ xfPMSetThreshold15mRLTS2,
+ xfPMResetThreshold15mRLTS2,
+ xfPMSetThreshold15mRLTM,
+ xfPMResetThreshold15mRLTM,
+ xfPMTLTS1Threshold,
+ xfPMSetThreshold15mTLTS1,
+ xfPMResetThreshold15mTLTS1,
+ xfPMSetThreshold15mTLTM,
+ xfPMResetThreshold15mTLTM,
+ xfPMSetThreshold24hRLTS1,
+ xfPMSetThreshold24hRLTS2,
+ xfPMSetThreshold24hRLTM,
+ xfPMSetThreshold24hTLTS1,
+ xfPMSetThreshold24hTLTM,
+ xfPMCurrent24hRLTS1,
+ xfPMCurrent24hRLTS2,
+ xfPMCurrent24hRLMin,
+ xfPMCurrent24hRLMax,
+ xfPMCurrent24hTLTS1,
+ xfPMCurrent24hTLMin,
+ xfPMCurrent24hTLMax,
+ xfPMCurrent24hMSEMin,
+ xfPMCurrent24hMSEMax,
+ xfPMCurrent24hXPIMin,
+ xfPMCurrent24hXPIMax,
+ xfPMCurrent15mRLTS1,
+ xfPMCurrent15mRLTS2,
+ xfPMCurrent15mRLMin,
+ xfPMCurrent15mRLMax,
+ xfPMCurrent15mTLTS1,
+ xfPMCurrent15mTLMin,
+ xfPMCurrent15mTLMax,
+ xfPMCurrent15mMSEMin,
+ xfPMCurrent15mMSEMax,
+ xfPMCurrent15mXPIMin,
+ xfPMCurrent15mXPIMax,
+ xfPMCurrent15mESR,
+ xfPMCurrent15mSESR,
+ xfPMCurrent15mBBER,
+ xfPMCurrent24hESR,
+ xfPMCurrent24hSESR,
+ xfPMCurrent24hBBER,
+
+-- Extended PM
+ xfExtRFPMRLTS1Threshold,
+ xfExtRFPMSetThreshold15mRLTS1,
+ xfExtRFPMResetThreshold15mRLTS1,
+ xfExtRFPMRLTS2Threshold,
+ xfExtRFPMSetThreshold15mRLTS2,
+ xfExtRFPMResetThreshold15mRLTS2,
+ xfExtRFPMSetThreshold15mRLTM,
+ xfExtRFPMResetThreshold15mRLTM,
+ xfExtRFPMTLTS1Threshold,
+ xfExtRFPMSetThreshold15mTLTS1,
+ xfExtRFPMResetThreshold15mTLTS1,
+ xfExtRFPMSetThreshold15mTLTM,
+ xfExtRFPMResetThreshold15mTLTM,
+ xfExtRFPMSetThreshold24hRLTS1,
+ xfExtRFPMSetThreshold24hRLTS2,
+ xfExtRFPMSetThreshold24hRLTM,
+ xfExtRFPMSetThreshold24hTLTS1,
+ xfExtRFPMSetThreshold24hTLTM,
+ xfExtRFPMStatus,
+ xfExtRFPMView,
+
+ xfExtRFPMCurrent24hElapsedTime,
+ xfExtRFPMCurrent24hRLTS1,
+ xfExtRFPMCurrent24hRLTS2,
+ xfExtRFPMCurrent24hRLMin,
+ xfExtRFPMCurrent24hRLMax,
+ xfExtRFPMCurrent24hTLTS1,
+ xfExtRFPMCurrent24hTLMin,
+ xfExtRFPMCurrent24hTLMax,
+
+ xfExtRFPMInterval24hRLTS1,
+ xfExtRFPMInterval24hRLTS2,
+ xfExtRFPMInterval24hRLMin,
+ xfExtRFPMInterval24hRLMax,
+ xfExtRFPMInterval24hTLTS1,
+ xfExtRFPMInterval24hTLMin,
+ xfExtRFPMInterval24hTLMax,
+ xfExtRFPMInterval24hValidData,
+
+ xfExtRFPMCurrent15mElapsedTime,
+ xfExtRFPMCurrent15mRLTS1,
+ xfExtRFPMCurrent15mRLTS2,
+ xfExtRFPMCurrent15mRLMin,
+ xfExtRFPMCurrent15mRLMax,
+ xfExtRFPMCurrent15mTLTS1,
+ xfExtRFPMCurrent15mTLMin,
+ xfExtRFPMCurrent15mTLMax,
+
+ xfExtRFPMInterval15mIntervalNumber,
+ xfExtRFPMInterval15mRLTS1,
+ xfExtRFPMInterval15mRLTS2,
+ xfExtRFPMInterval15mRLMin,
+ xfExtRFPMInterval15mRLMax,
+ xfExtRFPMInterval15mTLTS1,
+ xfExtRFPMInterval15mTLMin,
+ xfExtRFPMInterval15mTLMax,
+ xfExtRFPMInterval15mValidData,
+
+ xfExtRAUPMCurrent24hElapsedTime,
+ xfExtRAUPMCurrent24hMSEMin,
+ xfExtRAUPMCurrent24hMSEMax,
+ xfExtRAUPMCurrent24hXPIMin,
+ xfExtRAUPMCurrent24hXPIMax,
+
+ xfExtRAUPMInterval24hMSEMin,
+ xfExtRAUPMInterval24hMSEMax,
+ xfExtRAUPMInterval24hXPIMin,
+ xfExtRAUPMInterval24hXPIMax,
+ xfExtRAUPMInterval24hValidData,
+
+ xfExtRAUPMCurrent15mElapsedTime,
+ xfExtRAUPMCurrent15mMSEMin,
+ xfExtRAUPMCurrent15mMSEMax,
+ xfExtRAUPMCurrent15mXPIMin,
+ xfExtRAUPMCurrent15mXPIMax,
+
+ xfExtRAUPMInterval15mIntervalNumber,
+ xfExtRAUPMInterval15mMSEMin,
+ xfExtRAUPMInterval15mMSEMax,
+ xfExtRAUPMInterval15mXPIMin,
+ xfExtRAUPMInterval15mXPIMax,
+ xfExtRAUPMInterval15mValidData
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of all current objects in this MIB module."
+ ::= { xfRadioLinkPtpTerminalGroups 1 }
+
+ xfRadioLinkPtpTerminalObsoleteGroup OBJECT-GROUP
+ OBJECTS
+ {
+ xfTermSpectrumEfficiencyClassObsolete
+ }
+ STATUS obsolete
+ DESCRIPTION
+ "A collection of all obsolete objects in this MIB module."
+ ::= { xfRadioLinkPtpTerminalGroups 2 }
+
+END
|