diff options
Diffstat (limited to 'MIBS/fortinet/MERU-VOICE-STATISTICS-MIB')
| -rw-r--r-- | MIBS/fortinet/MERU-VOICE-STATISTICS-MIB | 426 |
1 files changed, 426 insertions, 0 deletions
diff --git a/MIBS/fortinet/MERU-VOICE-STATISTICS-MIB b/MIBS/fortinet/MERU-VOICE-STATISTICS-MIB new file mode 100644 index 0000000..a32185f --- /dev/null +++ b/MIBS/fortinet/MERU-VOICE-STATISTICS-MIB @@ -0,0 +1,426 @@ +-- ***************************************************************** +-- Meru Networks Enterprise Specific MIB +-- +-- Copyright (c) 2005 by Meru Networks +-- All rights reserved +-- +-- ***************************************************************** + +MERU-VOICE-STATISTICS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + NOTIFICATION-TYPE, + OBJECT-TYPE, + MODULE-IDENTITY, + OBJECT-IDENTITY, + enterprises, + Counter32, + Counter64, + Gauge32, + TimeTicks, + IpAddress, + Integer32 + FROM SNMPv2-SMI + Ipv6Address + FROM IPV6-TC + TEXTUAL-CONVENTION, + TimeInterval, + TimeStamp, + DateAndTime, + TruthValue, + DisplayString, + MacAddress, + RowStatus + FROM SNMPv2-TC + mwStatistics + FROM MERU-SMI + MwlNetProtocol, + MwlDeviceType, + MwlOnOffSwitch, + MwlQosProtocol, + MwlQosCallState + FROM MERU-TC; + + mwVoiceStatistics MODULE-IDENTITY + LAST-UPDATED "200506050000Z" + ORGANIZATION "Meru Networks" + CONTACT-INFO "support@merunetworks.com" + DESCRIPTION + "This MIB defines all the managed objects used to manage the Meru WLAN + Voice Statistics infrastructure" + ::= { mwStatistics 3 } + + + + mwPhoneTable OBJECT-TYPE + SYNTAX SEQUENCE OF MwPhoneEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object describes Phone Table " + ::= { mwVoiceStatistics 1 } + + mwPhoneEntry OBJECT-TYPE + SYNTAX MwPhoneEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object describes Phone Table " + INDEX { mwPhoneTableIndex } + ::= { mwPhoneTable 1 } + + MwPhoneEntry ::= SEQUENCE { + mwPhoneTableIndex Integer32, + mwPhoneIp IpAddress, + mwPhoneAp Integer32, + mwPhoneMac MacAddress, + mwPhoneType MwlQosProtocol, + mwPhoneApName DisplayString, + mwPhoneServer DisplayString, + mwPhoneUsername DisplayString, + mwPhoneTransport MwlNetProtocol, + mwPhoneDeviceType MwlDeviceType + } + + + mwPhoneTableIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value of the table " + ::= { mwPhoneEntry 1 } + + mwPhoneIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes IP Address" + ::= { mwPhoneEntry 2 } + + mwPhoneAp OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes AP ID" + ::= { mwPhoneEntry 3 } + + mwPhoneMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes MAC Address" + ::= { mwPhoneEntry 4 } + + mwPhoneType OBJECT-TYPE + SYNTAX MwlQosProtocol + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Protocol Type" + ::= { mwPhoneEntry 5 } + + mwPhoneApName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes AP Name" + ::= { mwPhoneEntry 6 } + + mwPhoneServer OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Server" + ::= { mwPhoneEntry 7 } + + mwPhoneUsername OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Username" + ::= { mwPhoneEntry 8 } + + mwPhoneTransport OBJECT-TYPE + SYNTAX MwlNetProtocol + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Transport" + ::= { mwPhoneEntry 9 } + + mwPhoneDeviceType OBJECT-TYPE + SYNTAX MwlDeviceType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Station Type" + ::= { mwPhoneEntry 10 } + + mwPhoneCallTable OBJECT-TYPE + SYNTAX SEQUENCE OF MwPhoneCallEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object describes Phone Call Table " + ::= { mwVoiceStatistics 2 } + + mwPhoneCallEntry OBJECT-TYPE + SYNTAX MwPhoneCallEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object describes Phone Call Table " + INDEX { mwPhoneCallTableIndex } + ::= { mwPhoneCallTable 1 } + + MwPhoneCallEntry ::= SEQUENCE { + mwPhoneCallTableIndex Integer32, + mwPhoneCallToIp IpAddress, + mwPhoneCallToAp Integer32, + mwPhoneCallType MwlQosProtocol, + mwPhoneCallToMac MacAddress, + mwPhoneCallState MwlQosCallState, + mwPhoneCallFromIp IpAddress, + mwPhoneCallFromAp Integer32, + mwPhoneCallFromMac MacAddress, + mwPhoneCallToApName DisplayString, + mwPhoneCallToFlowtag Integer32, + mwPhoneCallToPending MwlOnOffSwitch, + mwPhoneCallFromApName DisplayString, + mwPhoneCallToUsername DisplayString, + mwPhoneCallFromFlowtag Integer32, + mwPhoneCallFromPending MwlOnOffSwitch, + mwPhoneCallFromUsername DisplayString + } + + + mwPhoneCallTableIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value of the table " + ::= { mwPhoneCallEntry 1 } + + mwPhoneCallToIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes To IP Address" + ::= { mwPhoneCallEntry 2 } + + mwPhoneCallToAp OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes To AP ID" + ::= { mwPhoneCallEntry 3 } + + mwPhoneCallType OBJECT-TYPE + SYNTAX MwlQosProtocol + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Protocol Type" + ::= { mwPhoneCallEntry 4 } + + mwPhoneCallToMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes To MAC Address" + ::= { mwPhoneCallEntry 5 } + + mwPhoneCallState OBJECT-TYPE + SYNTAX MwlQosCallState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Call state" + ::= { mwPhoneCallEntry 6 } + + mwPhoneCallFromIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes From IP Address" + ::= { mwPhoneCallEntry 7 } + + mwPhoneCallFromAp OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes From AP ID" + ::= { mwPhoneCallEntry 8 } + + mwPhoneCallFromMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes From MAC Address" + ::= { mwPhoneCallEntry 9 } + + mwPhoneCallToApName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes To AP Name" + ::= { mwPhoneCallEntry 10 } + + mwPhoneCallToFlowtag OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes To Flow Tag" + ::= { mwPhoneCallEntry 11 } + + mwPhoneCallToPending OBJECT-TYPE + SYNTAX MwlOnOffSwitch + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes To Qos Pending" + ::= { mwPhoneCallEntry 12 } + + mwPhoneCallFromApName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes From AP Name" + ::= { mwPhoneCallEntry 13 } + + mwPhoneCallToUsername OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes To Username" + ::= { mwPhoneCallEntry 14 } + + mwPhoneCallFromFlowtag OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes From Flow Tag" + ::= { mwPhoneCallEntry 15 } + + mwPhoneCallFromPending OBJECT-TYPE + SYNTAX MwlOnOffSwitch + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes From Qos Pending" + ::= { mwPhoneCallEntry 16 } + + mwPhoneCallFromUsername OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes From Username" + ::= { mwPhoneCallEntry 17 } + + mwVoiceStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF MwVoiceStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object describes Voice Status Table " + ::= { mwVoiceStatistics 3 } + + mwVoiceStatusEntry OBJECT-TYPE + SYNTAX MwVoiceStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object describes Voice Status Table " + INDEX { mwVoiceStatusTableIndex } + ::= { mwVoiceStatusTable 1 } + + MwVoiceStatusEntry ::= SEQUENCE { + mwVoiceStatusTableIndex Integer32, + mwVoiceStatusAp Integer32, + mwVoiceStatusApName DisplayString, + mwVoiceStatusPhoneCount Unsigned32, + mwVoiceStatusRejectCount Counter64, + mwVoiceStatusActiveCallCount Unsigned32, + mwVoiceStatusPendingCallCount Unsigned32 + } + + + mwVoiceStatusTableIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value of the table " + ::= { mwVoiceStatusEntry 1 } + + mwVoiceStatusAp OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes AP ID" + ::= { mwVoiceStatusEntry 2 } + + mwVoiceStatusApName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes AP Name" + ::= { mwVoiceStatusEntry 3 } + + mwVoiceStatusPhoneCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Phone Count" + ::= { mwVoiceStatusEntry 4 } + + mwVoiceStatusRejectCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Call Rejected Count" + ::= { mwVoiceStatusEntry 5 } + + mwVoiceStatusActiveCallCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Active Call Count" + ::= { mwVoiceStatusEntry 6 } + + mwVoiceStatusPendingCallCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object describes Qos Pending Call Count" + ::= { mwVoiceStatusEntry 7 } + + +END +
\ No newline at end of file |