diff options
Diffstat (limited to 'MIBS/fs/GBNL2DhcpSnooping-MIB')
| -rw-r--r-- | MIBS/fs/GBNL2DhcpSnooping-MIB | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/MIBS/fs/GBNL2DhcpSnooping-MIB b/MIBS/fs/GBNL2DhcpSnooping-MIB new file mode 100644 index 0000000..ed812d3 --- /dev/null +++ b/MIBS/fs/GBNL2DhcpSnooping-MIB @@ -0,0 +1,192 @@ + GBNL2DhcpSnooping-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE,
+ Integer32, Counter32,
+ TimeTicks, IpAddress FROM SNMPv2-SMI
+ DisplayString, TruthValue,RowStatus FROM SNMPv2-TC
+
+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
+
+ gbnL2 FROM ADMIN-MASTER-MIB;
+
+ gbnL2DhcpSnooping MODULE-IDENTITY
+ LAST-UPDATED "0105030000Z" -- May 03,2001
+ ORGANIZATION "New admin Co., Ltd."
+ CONTACT-INFO "New admin Co., Ltd.
+ E-mail: support@newzyxel.com"
+
+ DESCRIPTION "ADMIN Enterprise MIB definition."
+
+ REVISION "0105030000Z" -- May 03,2001
+ DESCRIPTION "Initial MIB creation."
+
+ ::= { gbnL2 8 }
+
+------------------------------------------------------------------------------
+-- Textual Conventions (i.e., these do not affect object encoding):
+------------------------------------------------------------------------------
+ dhcpsnoopingOnOff OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "start/stop dhcpsnooping.Default is off。"
+ --开启关闭Dhcpsnooping功能。
+ ::= { gbnL2DhcpSnooping 1 }
+
+ dhcpsnoopingPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DhcpsnoopingPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains port informations of dhcpsnooping."
+ --DHCPSnooping的端口信息表。
+ ::= { gbnL2DhcpSnooping 2 }
+
+ dhcpsnoopingPortEntry OBJECT-TYPE
+ SYNTAX DhcpsnoopingPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Port informations of dhcpsnooping. This is indexed
+ by the port number."
+ --DHCPSnooping的端口信息表，以端口号为索引。
+ INDEX { portIndex }
+ ::= { dhcpsnoopingPortTable 1 }
+
+ DhcpsnoopingPortEntry ::=
+ SEQUENCE {
+ portIndex
+ INTEGER,
+ portTrustMode
+ INTEGER,
+ portMaxNum
+ INTEGER,
+ portIpSourceGuardMode
+ INTEGER
+ }
+
+ portIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Index of the port."
+ --端口索引，也就是端口号
+ ::= { dhcpsnoopingPortEntry 1 }
+
+ portTrustMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ trust(1),
+ untrust(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port mode of dhcpsnooping.Default is untrust."
+ --端口模式，默认为untrust。
+ ::= { dhcpsnoopingPortEntry 2 }
+
+ portMaxNum OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Max clients in this port.Range is from 0 to 2048.Default is 2048."
+ --端口最多可以学习到的DHCP客户端，取值范围为0~2048。默认为2048。
+ ::= { dhcpsnoopingPortEntry 3 }
+
+ portIpSourceGuardMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ ip(1),
+ ipMac(2),
+ ipMacVlan(3),
+ off(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port IP source guard mode .Default is off."
+ --端口IP地址保护模式，默认为关闭。
+ ::= { dhcpsnoopingPortEntry 4 }
+
+ dhcpsnoopingVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DhcpsnoopingVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains vlan informations of dhcpsnooping."
+ --DHCPSnooping的VLAN信息表。
+ ::= { gbnL2DhcpSnooping 3 }
+
+ dhcpsnoopingVlanEntry OBJECT-TYPE
+ SYNTAX DhcpsnoopingVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "VLAN informations of dhcpsnooping. This is indexed
+ by the vlan number."
+ --DHCPSnooping的VLAN信息表，以VLAN号为索引。
+ INDEX { vlanIndex }
+ ::= { dhcpsnoopingVlanTable 1 }
+
+ DhcpsnoopingVlanEntry ::=
+ SEQUENCE {
+ vlanIndex
+ INTEGER,
+ vlanMaxNum
+ INTEGER,
+ vlandhcpsnoopingOnOff
+ TruthValue
+ }
+
+ vlanIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Index of the vlan."
+ --VLAN索引，也就是VLAN号
+ ::= { dhcpsnoopingVlanEntry 1 }
+
+ vlanMaxNum OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Max clients in this vlan.Range is from 0 to 2048.Default is 2048."
+ --VLAN最多可以学习到的DHCP客户端，取值范围为0~2048。默认为2048。
+ ::= { dhcpsnoopingVlanEntry 2 }
+
+ vlandhcpsnoopingOnOff OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "start/stop dhcpsnooping of this vlan.Default is on。"
+ --开启关闭VLAN Dhcpsnooping功能。
+ ::= { dhcpsnoopingVlanEntry 3 }
+
+ dhcpsnoopingNto1VlanOnOff OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "start/stop N:1 vlan.Default is off."
+ --开启关闭N:1 vlan功能。
+ ::= { gbnL2DhcpSnooping 4 }
+
+ dhcpsnoopingPortDownAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ fastRemove(1),
+ autoAging(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When port moves to down state, if fast-remove is enabled, switch will remove entries immediately,
+ if auto-aging is enabled, switch will wait until lease time expires and remove entries."
+ ::= { gbnL2DhcpSnooping 5 }
+
+END
|