summaryrefslogtreecommitdiff
path: root/MIBS/fs/NSCRTV-EPON-STP-MGM-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/fs/NSCRTV-EPON-STP-MGM-MIB')
-rw-r--r--MIBS/fs/NSCRTV-EPON-STP-MGM-MIB493
1 files changed, 493 insertions, 0 deletions
diff --git a/MIBS/fs/NSCRTV-EPON-STP-MGM-MIB b/MIBS/fs/NSCRTV-EPON-STP-MGM-MIB
new file mode 100644
index 0000000..4764ff4
--- /dev/null
+++ b/MIBS/fs/NSCRTV-EPON-STP-MGM-MIB
@@ -0,0 +1,493 @@
+
+NSCRTV-EPON-STP-MGM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ BridgeId, Timeout
+ FROM BRIDGE-MIB
+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, TimeTicks
+ FROM SNMPv2-SMI
+ DateAndTime, MacAddress, TimeStamp, RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ EponDeviceIndex, EponCardIndex, EponPortIndex, EponAlarmCode, EponAlarmInstance, EponSeverityType,
+ AutoNegotiationTechAbility, TAddress, EponStats15MinRecordType, EponStats24HourRecordType, EponStatsThresholdType
+ FROM NSCRTV-EPONEOC-EPON-MIB
+ stpManagementObjects
+ FROM NSCRTV-EPONEOC-EPON-MIB;
+
+--------------------------------------------------------------------------------
+-- stpManagementObjects[STP管理项](1.3.6.1.4.1.17409.2.3.9)
+--------------------------------------------------------------------------------
+
+ stpGlobalSetTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpGlobalSetEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ STP全局表"
+ ::= { stpManagementObjects 1 }
+
+ stpGlobalSetEntry OBJECT-TYPE
+ SYNTAX StpGlobalSetEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX { stpGlobalSetIndex }
+ ::= { stpGlobalSetTable 1 }
+
+ StpGlobalSetEntry ::=
+ SEQUENCE {
+ stpGlobalSetIndex
+ EponDeviceIndex,
+ stpGlobalSetVersion
+ INTEGER,
+ stpGlobalSetPriority
+ INTEGER,
+ stpGlobalSetTimeSinceTopologyChange
+ TimeTicks,
+ stpGlobalSetTopChanges
+ Counter32,
+ stpGlobalSetDesignatedRoot
+ BridgeId,
+ stpGlobalSetRootCost
+ INTEGER,
+ stpGlobalSetRootPort
+ OCTET STRING,
+ stpGlobalSetMaxAge
+ Timeout,
+ stpGlobalSetHelloTime
+ Timeout,
+ stpGlobalSetHoldTime
+ INTEGER,
+ stpGlobalSetForwardDelay
+ Timeout,
+ stpGlobalSetBridgeMaxAge
+ Timeout,
+ stpGlobalSetBridgeHelloTime
+ Timeout,
+ stpGlobalSetBridgeForwardDelay
+ Timeout,
+ stpGlobalSetRstpTxHoldCount
+ INTEGER,
+ stpGlobalSetEnable
+ TruthValue
+ }
+
+ stpGlobalSetIndex OBJECT-TYPE
+ SYNTAX EponDeviceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ 索引号
+ For OLT - Set to corresponding device
+ For ONU - Set to 0
+ "
+ ::= { stpGlobalSetEntry 1 }
+
+ stpGlobalSetVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ rstp(1),
+ stp(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 生成树协议版本。"
+ DEFVAL { rstp }
+ ::= { stpGlobalSetEntry 2 }
+
+ stpGlobalSetPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 优先级。
+ 在支持IEEE 802.1d或者IEEE 802.1w的网桥上，取值范围是0-61440，步长是4096。"
+ ::= { stpGlobalSetEntry 3 }
+
+ stpGlobalSetTimeSinceTopologyChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 变更时间，网桥实体检测到最近一次拓扑改变之后经历的时间。"
+ ::= { stpGlobalSetEntry 4 }
+ stpGlobalSetTopChanges OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "topology changes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 变更次数，网桥重启或初始化化拓扑的变更次数。"
+ ::= { stpGlobalSetEntry 5 }
+
+ stpGlobalSetDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 根桥，指定根桥的BridgeId。"
+ ::= { stpGlobalSetEntry 6 }
+
+ stpGlobalSetRootCost OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 根路径开销，网桥到根桥的路径消耗。"
+ ::= { stpGlobalSetEntry 7 }
+
+ stpGlobalSetRootPort OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (3))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 根端口，是连接本网桥和根网桥的端口，它提供的路径消耗最小
+ The port is presented by three octets, in sequence of device ID, slot,
+ and port.
+ For ONU, device ID is meaningless and shall set 0. Slot and port shall
+ be set to corresponding value.
+ For OLT, device ID, slot, and port shall be set to corresponding value.
+ For example,
+ 01 02 03 means device 1, slot 2, port 3 is root port.
+ 0x00 04 05 means ONU slot 4, port 5 is root port.
+ "
+ ::= { stpGlobalSetEntry 8 }
+
+ stpGlobalSetMaxAge OBJECT-TYPE
+ SYNTAX Timeout
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 老化时间，端口从网络中学习到的生成树协议信息的老化时间，单位：1/100 secs。"
+ ::= { stpGlobalSetEntry 9 }
+
+ stpGlobalSetHelloTime OBJECT-TYPE
+ SYNTAX Timeout
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 报文发送间隔，网桥在任意端口发送配置网桥PDU的时间间隔。"
+ ::= { stpGlobalSetEntry 10 }
+
+ stpGlobalSetHoldTime OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 维持时间，在这个时间间隔内，本网桥不会发送两个以上配置网桥PDU。"
+ ::= { stpGlobalSetEntry 11 }
+
+ stpGlobalSetForwardDelay OBJECT-TYPE
+ SYNTAX Timeout
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 转换时延，控制一个端口多快地改变自己的生成状态，决定了本端口开始转发前，在监听状态和学习状态滞留多长时间。
+ 当一个发现一个拓扑变更，并且正在处理时，这个值也用来控制动态过滤表的老化时间。
+ "
+ ::= { stpGlobalSetEntry 12 }
+
+ stpGlobalSetBridgeMaxAge OBJECT-TYPE
+ SYNTAX Timeout (600..4000)
+ UNITS "centi-seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 如果本网桥是根网桥，那么所有网桥把这个值用作老化时间。"
+ ::= { stpGlobalSetEntry 13 }
+
+ stpGlobalSetBridgeHelloTime OBJECT-TYPE
+ SYNTAX Timeout (100..1000)
+ UNITS "centi-seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 如果本网桥是根网桥，那么所有网桥把这个值用作报文发送的时间间隔。"
+ ::= { stpGlobalSetEntry 14 }
+
+ stpGlobalSetBridgeForwardDelay OBJECT-TYPE
+ SYNTAX Timeout (400..3000)
+ UNITS "centi-seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 如果本网桥是根网桥，那么所有网桥把这个值用于转换时延。"
+ ::= { stpGlobalSetEntry 15 }
+
+ stpGlobalSetRstpTxHoldCount OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 传输限速，对RSTP，用于限制端口的报文发送速率。"
+ DEFVAL { 3 }
+ ::= { stpGlobalSetEntry 16 }
+
+ stpGlobalSetEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 使能状态，启用或关闭STP。true(1)为开启。"
+ ::= { stpGlobalSetEntry 17 }
+
+ stpPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ STP端口表"
+ ::= { stpManagementObjects 2 }
+
+ stpPortEntry OBJECT-TYPE
+ SYNTAX StpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX { stpPortStpIndex, stpPortCardIndex, stpPortIndex }
+ ::= { stpPortTable 1 }
+
+ StpPortEntry ::=
+ SEQUENCE {
+ stpPortStpIndex
+ EponDeviceIndex,
+ stpPortCardIndex
+ EponCardIndex,
+ stpPortIndex
+ EponPortIndex,
+ stpPortStatus
+ INTEGER,
+ stpPortPriority
+ INTEGER,
+ stpPortPathCost
+ INTEGER,
+ stpPortDesignatedRoot
+ BridgeId,
+ stpPortDesignatedCost
+ INTEGER,
+ stpPortDesignatedBridge
+ BridgeId,
+ stpPortDesignatedPort
+ Gauge32,
+ stpPortForwardTransitions
+ Unsigned32,
+ stpPortRstpProtocolMigration
+ TruthValue,
+ stpPortRstpAdminEdgePort
+ TruthValue,
+ stpPortRstpOperEdgePort
+ TruthValue,
+ stpPortPointToPointAdminStatus
+ INTEGER,
+ stpPortPointToPointOperStatus
+ TruthValue,
+ stpPortEnabled
+ TruthValue
+ }
+
+ stpPortStpIndex OBJECT-TYPE
+ SYNTAX EponDeviceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ 索引号。
+ For OLT - Set to corresponding device/SLOT/PORT
+ For ONU - Set to 0
+ "
+ ::= { stpPortEntry 1 }
+
+ stpPortCardIndex OBJECT-TYPE
+ SYNTAX EponCardIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Epon板卡索引号
+ For OLT, set to 0
+ For ONU, set to correspond card index"
+ ::= { stpPortEntry 2 }
+
+ stpPortIndex OBJECT-TYPE
+ SYNTAX EponPortIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ 端口号，对OLT为SNI/PON port，对ONU为UNI端口号。
+ For OLT, set to 0
+ For ONU, set to correspond port index"
+ ::= { stpPortEntry 3 }
+
+ stpPortStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disabled(1),
+ blocking(2),
+ listening(3),
+ learning(4),
+ forwarding(5),
+ broken(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+端口状态，由生成树协议的应用程序定义，对于被禁用STP的端口，这个状态应该为disable。"
+ ::= { stpPortEntry 4 }
+
+ stpPortPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 端口优先级"
+ ::= { stpPortEntry 5 }
+
+ stpPortPathCost OBJECT-TYPE
+ SYNTAX INTEGER (1..200000000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+端口路径开销，本端口在通往生成树根的路径上增加的路径消耗802.1D-1998推荐这个参数的默认值跟连接LAN的速度成反比。"
+ ::= { stpPortEntry 6 }
+
+ stpPortDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+指定根网桥，在配置BPDU中被记录为根的网桥的标识符，这些配置BPDU由指定网桥发送，而指定网桥用于跟这个端口相连的网段。"
+ ::= { stpPortEntry 7 }
+
+ stpPortDesignatedCost OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+指定路径开销，跟本端口相连的网段的指定端口的路径消耗，这个值会跟接受到的网桥PDU中的根路径消耗字段进行比较。"
+ ::= { stpPortEntry 8 }
+
+ stpPortDesignatedBridge OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 指定网桥ID，本端口认为的本端口的网段的指定网桥的标识符。"
+ ::= { stpPortEntry 9 }
+
+ stpPortDesignatedPort OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 指定端口，指定网桥上用于本端口网段的端口的标识符。"
+ ::= { stpPortEntry 10 }
+
+ stpPortForwardTransitions OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 本端口已经从学习状态转变到转发状态的时间。"
+ ::= { stpPortEntry 11 }
+
+ stpPortRstpProtocolMigration OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+协议迁移，如果操作在RSTP模式，将这个节点设置为TRUE(1)会强制这个端口发送RSTP BPDU，读操作无意，总返回FALSE(2)。"
+ ::= { stpPortEntry 12 }
+
+ stpPortRstpAdminEdgePort OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+边缘端口管理状态，指定该端口是否为边缘端口，设置该节点将导致相应的stpPortRstpOperEdgePort节点设置成同样的值。
+ 当设置成true(1)，但端口上收到一个BPDU时，stpPortRstpOperEdgePort将变成false(2)。
+ "
+ ::= { stpPortEntry 13 }
+
+ stpPortRstpOperEdgePort OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+边缘端口状态，这个节点被初始化成stpPortRstpAdminEdgePort的值，接收到一个BPDU时被设置成false(2)。"
+ ::= { stpPortEntry 14 }
+ stpPortPointToPointAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ forceFalse(0),
+ forceTrue(1),
+ auto(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 连接到本端口网段的点对点管理状态。"
+ ::= { stpPortEntry 15 }
+
+ stpPortPointToPointOperStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ 连接到本端口网段的点对点实际状态。"
+ ::= { stpPortEntry 16 }
+
+ stpPortEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ 端口使能状态，true(1)为开启。"
+ ::= { stpPortEntry 17 }
+
+--
+-- END of NSCRTV-EPON-STP-MGM-MIB
+--
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 15:21:18 +0000