diff options
Diffstat (limited to 'MIBS/hp/FAN-MIB')
| -rw-r--r-- | MIBS/hp/FAN-MIB | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/MIBS/hp/FAN-MIB b/MIBS/hp/FAN-MIB new file mode 100644 index 0000000..dcee0d7 --- /dev/null +++ b/MIBS/hp/FAN-MIB @@ -0,0 +1,236 @@ +FAN-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Unsigned32 + FROM SNMPv2-SMI + + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + + TEXTUAL-CONVENTION + FROM SNMPv2-TC + + hpSwitch + FROM HP-ICF-OID; + +hpicfFanMIB MODULE-IDENTITY + LAST-UPDATED "200808271030Z" --August 27, 2008 10:30 GMT + ORGANIZATION "HP Networking" + CONTACT-INFO "Hewlett-Packard Company + 8000 Foothills Blvd. + Roseville, CA 95747" + DESCRIPTION "The MIB module is for representing switch fan entity." + REVISION "200808271030Z" --August 27, 2008 10:30 GMT + DESCRIPTION "Revision 01." + ::= { hpSwitch 54 } + +-- ******************************************************************** +-- FAN Textual Conventions +-- ******************************************************************** +HpicfDcFanIndex ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION "A unique value that serves as an index to identify the fan." + SYNTAX Unsigned32 + +HpicfDcFanType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "An enumerated value that indications the fan types." + SYNTAX INTEGER { + unknown(0), + mm(1), + fm(2), + im(3), + ps(4), + rollup(5), + maxtype(6) + } + +HpicfDcFanAirflowDirection ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "An enumerated value which provides an indication of the + fan airflow direction. The Physical fan airflow direction + could be either from the port towards the power supply + module i.e. portToPower(1), or from the power supply module + towards the port i.e. powerToPort(2)" + SYNTAX INTEGER { + portToPower(1), + powerToPort(2) + } + +HpicfDcFanState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "An enumerated value which provides an indication of the + fan state." + SYNTAX INTEGER { + failed(0), + removed(1), + off(2), + underspeed(3), + overspeed(4), + ok(5), + maxstate(6) + } + +-- ******************************************************************** +-- Fan Scalars +-- ******************************************************************** + +hpicfFanScalars OBJECT IDENTIFIER ::= { hpicfFanMIB 1 } + + hpicfFanUserPrefAirflowDir OBJECT-TYPE + SYNTAX INTEGER { + portToPower(1), + powerToPort(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The user preferred fan airflow direction. The direction could be + powerToPort or portToPower. The actual fan direction has to be + changed manually, this will be used to indicate to the user when + when the actual fan airflow direction is different from the user + preferred airflow direction." + DEFVAL { powerToPort } + ::= { hpicfFanScalars 1 } + + +-- ******************************************************************** +-- FAN entry +-- ******************************************************************** + +hpicfEntityFan OBJECT IDENTIFIER ::= { hpicfFanMIB 2 } + +hpicfFanTable OBJECT-TYPE + SYNTAX SEQUENCE OF HpicfFanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table contains one row for every fan in the switch entity." + ::= { hpicfEntityFan 1 } + +hpicfFanEntry OBJECT-TYPE + SYNTAX HpicfFanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Information about fan entity table." + INDEX { hpicfFanIndex } + ::= { hpicfFanTable 1 } + +HpicfFanEntry ::= SEQUENCE { + hpicfFanIndex HpicfDcFanIndex, + hpicfFanTray Integer32, + hpicfFanType HpicfDcFanType, + hpicfFanState HpicfDcFanState, + hpicfFanRecovering Integer32, + hpicfFanNumFailures Counter32, + hpicfFanAirflowDirection HpicfDcFanAirflowDirection +} + +hpicfFanIndex OBJECT-TYPE + SYNTAX HpicfDcFanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The index that is used to access the switch fan entry table." + ::= { hpicfFanEntry 1 } + +hpicfFanTray OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The tray number in which the fan is docked." + ::= { hpicfFanEntry 2 } + +hpicfFanType OBJECT-TYPE + SYNTAX HpicfDcFanType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "An indication of the vendor-specific fan." + ::= { hpicfFanEntry 3 } + +hpicfFanState OBJECT-TYPE + SYNTAX HpicfDcFanState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current state of the fan." + ::= { hpicfFanEntry 4 } + +hpicfFanRecovering OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "An indication that the switch fan entity is faulty. + Before declaring a fan to be good after a failure is + detected, the same good indication must happen five (5) + times in a row. A failure indication is always TRUE, while + a good indication could be FALSE, hence this parameter is + used to count the repeated good indications before + declaring the fan to be good " + ::= { hpicfFanEntry 5 } + +hpicfFanNumFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of times the fan has failed." + ::= { hpicfFanEntry 6 } + +hpicfFanAirflowDirection OBJECT-TYPE + SYNTAX HpicfDcFanAirflowDirection + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indication of the fan air flow direction, either + from Power supply towards the port or from the port + towards the power supply." + ::= { hpicfFanEntry 7 } + + +-- ******************************************************************** +-- FAN Conformance +--******************************************************************** + + hpicfFanConformance OBJECT IDENTIFIER ::= { hpicfFanMIB 3 } + hpicfFanCompliance OBJECT IDENTIFIER ::= { hpicfFanConformance 1 } + hpicfFanGroups OBJECT IDENTIFIER ::= { hpicfFanConformance 2 } + +-- ******************************************************************** +-- FAN Complicance +-- ******************************************************************** + hpicfDcFanCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for entries which implement + the FAN MIB." + MODULE -- This module + MANDATORY-GROUPS + { + hpicfFanScalarsGroup, + hpicfFanGroup + } + GROUP hpicfFanGroup + DESCRIPTION "Objects associated with switch entity FAN." + ::= { hpicfFanCompliance 1 } + +-- +-- FAN Groups +-- + hpicfFanScalarsGroup OBJECT-GROUP + OBJECTS + { + hpicfFanUserPrefAirflowDir + } + STATUS current + DESCRIPTION "Basic Scalars required in FAN MIB implementation." + ::= { hpicfFanGroups 1 } + + hpicfFanGroup OBJECT-GROUP + OBJECTS + { + hpicfFanTray, + hpicfFanType, + hpicfFanState, + hpicfFanRecovering, + hpicfFanNumFailures, + hpicfFanAirflowDirection + } + STATUS current + DESCRIPTION "FAN MIB parameters " + ::= { hpicfFanGroups 2 } +END |