summaryrefslogtreecommitdiff
path: root/MIBS/hp/HP-ICF-8023-RPTR
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/hp/HP-ICF-8023-RPTR')
-rw-r--r--MIBS/hp/HP-ICF-8023-RPTR1509
1 files changed, 1509 insertions, 0 deletions
diff --git a/MIBS/hp/HP-ICF-8023-RPTR b/MIBS/hp/HP-ICF-8023-RPTR
new file mode 100644
index 0000000..6540b8a
--- /dev/null
+++ b/MIBS/hp/HP-ICF-8023-RPTR
@@ -0,0 +1,1509 @@
+ HP-ICF-8023-RPTR DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ Integer32, Counter32,
+ OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+ DisplayString, TruthValue
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ rptrPortAutoPartitionState
+ FROM SNMP-REPEATER-MIB -- 802.3 Repeater MIB
+ rpMauMediaAvailable, rpMauGroupIndex, rpMauPortIndex,
+ rpMauIndex
+ FROM MAU-MIB
+ hpicfObjectModules, hpicfRepeater, hpicf8023RptrTrapsPrefix
+ FROM HP-ICF-OID;
+
+ hpicf8023RptrMib MODULE-IDENTITY
+ LAST-UPDATED "200011032210Z" -- November 3, 2000
+ ORGANIZATION "Hewlett Packard Company,
+ Network Infrastructure Solutions"
+ CONTACT-INFO
+ "Hewlett Packard Company
+ 8000 Foothills Blvd.
+ Roseville, CA 95747"
+ DESCRIPTION
+ "This MIB module contains objects that provide
+ HP-specific extensions to the 802.3 Repeater MIB."
+
+ REVISION "200011032210Z" -- November 3, 2000
+ DESCRIPTION "Updated division name."
+
+ REVISION "9807162027Z" -- July 16, 1998
+ DESCRIPTION
+ "Added repeater port auto-negotiation objects."
+
+ REVISION "9609100219Z" -- September 10, 1996
+ DESCRIPTION
+ "Split this MIB module from the former monolithic
+ hp-icf MIB. Added hpicf8023MultiRptr groups.
+ Deprecated objects that presumed a single repeater
+ segment."
+ REVISION "9402250000Z" -- February 25, 1994
+ DESCRIPTION
+ "Initial revision of this MIB module. Released
+ with the AdvanceStack 10BaseT hubs: HPJ2600A,
+ HPJ2601A and HPJ2602A and agent module HPJ2603A."
+ ::= { hpicfObjectModules 9 }
+
+
+ hpRptrBasic OBJECT IDENTIFIER ::= { hpicfRepeater 1 }
+ hpRptrBasicGlobal OBJECT IDENTIFIER ::= { hpRptrBasic 1 }
+
+
+ hpRptrEntityName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..15))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The local name of this repeater. This is the
+ same value as hpicfEntityName in the case where
+ there is Distributed Management Protocol to access
+ this device.
+
+ For SNMPv1, this name is appended to the agent
+ community name to obtain a community name to use
+ to specify that the agent should proxy to this
+ repeater. For example, if this agent has a
+ community with a community name of 'public', and
+ the value of this object is 'repeater1', the
+ community 'public/repeater1' will specify that the
+ agent should proxy to the public community of the
+ repeater1 box to obtain management information
+ about this repeater.
+
+ If an agent receives a management request where
+ the localEntity is not specified, it will default
+ to the local repeater on which this agent is
+ executing.
+
+ This object has been deprecated. Since it is a
+ scalar, it does not scale to systems containing
+ multiple repeater segments. In addition, it is only
+ considered useful in systems supporting the
+ Distributed Management Chain, which has also been
+ deprecated."
+ ::= { hpRptrBasicGlobal 1 }
+
+ hpRptrThinlanFault OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ When set to 'true' this object causes the Fault
+ Led to blink if the ThinLan Port is segmented.
+
+ This object has been deprecated. It only makes
+ sense in systems that support a single BNC port."
+ ::= { hpRptrBasicGlobal 2 }
+
+ hpRptrSqeEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ When 'true', this flag indicates that SQE has
+ been detected for the last ten agent transmits and
+ there is a high probability that the SQE switch on
+ the transceiver attached to the AUI port is set to
+ Enabled, when it should be Disabled.
+
+ This object has been deprecated, since it presumes
+ that the system will only have a single AUI port.
+ It has been replaced by the hpRptrPtSqeEnabled
+ object."
+ ::= { hpRptrBasicGlobal 3 }
+
+ hpRptrRobustHealing OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ When this flag is set to 'true', it enables
+ robust port healing mode. The 802.3 specification
+ states that a segmented port is healed by
+ successfully transmitting or receiving a packet on
+ the port. This mode disables port healing on
+ successful packet reception and requires that a
+ packet be successfully transmitted on a port in
+ order for a segmented port to be healed."
+ ::= { hpRptrBasicGlobal 4 }
+
+ hpRptrBasicGroup OBJECT IDENTIFIER ::= { hpRptrBasic 2 }
+
+ hpRptrBasicGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HpRptrBasicGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ HP specific extensions to the rptrGroupTable."
+ ::= { hpRptrBasicGroup 1 }
+
+ hpRptrBasicGroupEntry OBJECT-TYPE
+ SYNTAX HpRptrBasicGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ An entry in the table, containing HP extensions
+ for a specific group."
+ INDEX { hpRptrGrpGroupIndex }
+ ::= { hpRptrBasicGroupTable 1 }
+
+ HpRptrBasicGroupEntry ::=
+ SEQUENCE {
+ hpRptrGrpGroupIndex Integer32,
+ hpRptrGrpPortsAdminStatus OCTET STRING,
+ hpRptrGrpPortsSegStatus OCTET STRING,
+ hpRptrGrpPortsMediaAvailable OCTET STRING,
+ hpRptrGrpPortsLinkbeatEnabled OCTET STRING,
+ hpRptrGrpPortsOperStatus OCTET STRING
+ }
+
+ hpRptrGrpGroupIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The group within the repeater for which this
+ entry contains information. This object has the
+ same value as the corresponding instance of
+ rptrGroupIndex."
+ ::= { hpRptrBasicGroupEntry 1 }
+
+ hpRptrGrpPortsAdminStatus OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..128))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The hpRptrGrpPortsAdminStatus is a bit map of the
+ state of the rptrPortAdminStatus object for all
+ of the ports in this group. The object has a one
+ bit for each port for which the value of
+ rptrPortAdminStatus is equal to 'enabled(1)' and
+ a zero bit for each port for which the value of
+ rptrPortAdminStatus is equal to 'disabled(2)'.
+
+ The bits are placed into the OCTET STRING in the
+ following order:
+
+ octet 0 octet 1 octet 2 ...
+ bits 7-0 bits 7-0 bits 7-0 ...
+ ports 1-8 ports 9-16 ports 17-24 ...
+
+ Values of unused bits in the last octet are
+ undefined."
+ ::= { hpRptrBasicGroupEntry 2 }
+
+ hpRptrGrpPortsSegStatus OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..128))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The hpRptrGrpPortsSegStatus is a bit map of the
+ state of the rptrPortAutoPartitionState of all of
+ the ports in this group. The object has a one
+ bit for each port for which the value of
+ rptrPortAutoPartitionState is equal to
+ 'notAutoPartitioned(1)' and a zero bit for each
+ port for which the value of
+ rptrPortAutoPartitionState is equal to
+ 'autoPartitioned(2)'.
+
+ The bits are placed into the OCTET STRING in the
+ following order:
+
+ octet 0 octet 1 octet 2 ...
+ bits 7-0 bits 7-0 bits 7-0 ...
+ ports 1-8 ports 9-16 ports 17-24 ...
+
+ Values of unused bits in the last octet are
+ undefined."
+ ::= { hpRptrBasicGroupEntry 3 }
+
+ hpRptrGrpPortsMediaAvailable OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..128))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The hpRptrGrpPortsMediaAvailable is a bit map of
+ the state of the rpMauMediaAvailable object for
+ all of the ports in this group. The object has a
+ one bit for each port for which the value of
+ rpMauMediaAvailable is equal to 'available(3)'
+ and a zero bit for each port for which the value
+ of rpMauMediaAvailable is not equal to
+ 'available(3)'.
+
+ The bits are placed into the OCTET STRING in the
+ following order:
+
+ octet 0 octet 1 octet 2 ...
+ bits 7-0 bits 7-0 bits 7-0 ...
+ ports 1-8 ports 9-16 ports 17-24 ...
+
+ Values of unused bits in the last octet are
+ undefined."
+ ::= { hpRptrBasicGroupEntry 4 }
+
+ hpRptrGrpPortsLinkbeatEnabled OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..128))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The hpRptrGrpPortsLinkbeatEnabled is a bit map of
+ the state of the hpRptrPtLinkbeatEnable object for
+ all of the ports in this group. The object has a
+ one bit for each port for which the value of
+ hpRptrPtLinkbeatEnable is equal to 'true(1)' and
+ a zero bit for each port for which the value of
+ hpRptrPtLinkbeatEnable is equal to 'false(2)'.
+
+ The bits are placed into the OCTET STRING in the
+ following order:
+
+ octet 0 octet 1 octet 2 ...
+ bits 7-0 bits 7-0 bits 7-0 ...
+ ports 1-8 ports 9-16 ports 17-24 ...
+
+ Values of unused bits in the last octet are
+ undefined."
+ ::= { hpRptrBasicGroupEntry 5 }
+
+ hpRptrGrpPortsOperStatus OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..128))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The hpRptrGrpPortsOperStatus is a bit map of the
+ state of all hub ports in the group. The object
+ has a 1 bit for each port that is enabled, not
+ segmented, and the media is available. Ports on
+ which these conditions are not true have a 0 bit.
+ The bits are placed into the OCTET STRING in the
+ following order:
+
+ octet 0 octet 1 octet 2 ...
+ bits 7-0 bits 7-0 bits 7-0 ...
+ ports 1-8 ports 9-16 ports 17-24 ...
+
+ Values of unused bits in the last octet are
+ undefined."
+ ::= { hpRptrBasicGroupEntry 6 }
+
+
+ hpRptrBasicPort OBJECT IDENTIFIER ::= { hpRptrBasic 3 }
+
+ hpRptrBasicPtTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HpRptrBasicPtEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "HP specific extensions to the rptrPortTable."
+ ::= { hpRptrBasicPort 1 }
+
+ hpRptrBasicPtEntry OBJECT-TYPE
+ SYNTAX HpRptrBasicPtEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the table, containing HP extensions
+ for a specific port."
+ INDEX { hpRptrPtGroupIndex, hpRptrPtPortIndex }
+ ::= { hpRptrBasicPtTable 1 }
+
+ HpRptrBasicPtEntry ::=
+ SEQUENCE {
+ hpRptrPtGroupIndex Integer32,
+ hpRptrPtPortIndex Integer32,
+ hpRptrPtLinkbeatEnable TruthValue,
+ hpRptrPtPolarityReversed TruthValue,
+ hpRptrPtSqeEnabled TruthValue,
+ hpRptrPtMediaAvailTrapEnable TruthValue,
+ hpRptrPtLongCableEnable TruthValue
+ }
+
+ hpRptrPtGroupIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The group containing the port for which this
+ entry contains information. This object has the
+ same value as the corresponding instance of
+ rptrPortGroupIndex."
+ ::= { hpRptrBasicPtEntry 1 }
+
+ hpRptrPtPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port within the group for which this entry
+ contains information. This object has the same
+ value as the corresponding instance of
+ rptrPortIndex."
+ ::= { hpRptrBasicPtEntry 2 }
+
+ hpRptrPtLinkbeatEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When this flag is set to 'true' the port's link
+ beat is enabled and when set to 'false' it is
+ disabled."
+ ::= { hpRptrBasicPtEntry 3 }
+
+ hpRptrPtPolarityReversed OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object is used to indicate that the hub port
+ was wired with the positive/negative polarity of
+ its transmit and receive pairs reversed. Note
+ that the port will continue to operate in this
+ state, with the hub inverting the polarity
+ internally."
+ ::= { hpRptrBasicPtEntry 4 }
+
+ hpRptrPtSqeEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When 'true', this flag indicates that SQE has
+ been detected for the last ten agent transmits and
+ there is a high probability that the SQE switch on
+ the transceiver attached to this port is set to
+ Enabled, when it should be Disabled. This value
+ can only be 'true' on AUI ports."
+ ::= { hpRptrBasicPtEntry 5 }
+
+ hpRptrPtMediaAvailTrapEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether hpicfMediaAvailDetectTrap and
+ hpicfMediaAvailLostTrap events should be generated
+ for MAUs attached to this port. This object has the
+ value of 'false' by default. Setting the value of
+ this object to 'true' will cause a
+ hpicfMediaAvailDetectTrap event to be generated
+ whenever an instance of rpMauMediaAvailable object
+ associated with a MAU attached to this port enters
+ the 'available' state, and a hpicfMediaAvailLostTrap
+ to be generated whenever an instance of the
+ rpMauMediaAvailable object associated with a MAU
+ attached to this port exits the 'available' state.
+ Note that the disposition of these events is
+ controlled by the RMON eventTable.
+
+ We recommend that this object is only be set to
+ 'true' on important ports, such as cascade ports and
+ ports attached to routers bridges, switches, or
+ servers. Setting this object to 'true' on other
+ ports may cause irrelevant traps. For example, it
+ is unlikely that an administrator would want to
+ receive a trap every time a user turns their PC off."
+ ::= { hpRptrBasicPtEntry 6 }
+
+ hpRptrPtLongCableEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When this flag is set to 'true' the port's squelch
+ level will be reduced to account for extended
+ distance connections. When set to 'false', this
+ port's squelch level will be normal. We recommend
+ that this object only be set to 'true' for ports
+ that are actually connected to long cables."
+ ::= { hpRptrBasicPtEntry 7 }
+
+ hpRptrMonitor OBJECT IDENTIFIER ::= { hpicfRepeater 2 }
+
+ hpRptrMonitorGlobal OBJECT IDENTIFIER ::= { hpRptrMonitor 1 }
+
+ -- Note: The hpRptrMonitorGlobal counters that are composed of
+ -- other objects are provided to allow for event testing on
+ -- global error conditions.
+ --
+ -- Note: the hpRptrMonitorGlobal counters have been deprecated.
+ -- Since they are scalars, they do not scale to systems
+ -- containing multiple repeater segments. The standard repeater
+ -- MIB is adding per-repeater counters for collisions, total
+ -- frames, total octets and total errors. Keeping per-repeater
+ -- totals of the other counters included here was felt to be
+ -- overkill. Another factor is that it is quite expensive to
+ -- maintain global counters in the presence of port mobility, so
+ -- it made sense to limit the number of total counters to those
+ -- that would be the most useful for network management. Note
+ -- that most of the information in these counters is available
+ -- through other MIBs, such as the RMON etherStats group.
+
+ hpRptrMonCounters
+ OBJECT IDENTIFIER ::= { hpRptrMonitorGlobal 1 }
+
+ hpRptrMonGlobalFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The total number of frames of valid frame length
+ that have been received on all ports in this
+ repeater. This counter is the summation of the
+ values of the rptrMonitorPortReadableFrames
+ counter for all of the ports in this repeater.
+ Equivalently, this counter is the summation of the
+ values of the rptrMonitorGroupTotalFrames counter
+ for all of the port groups in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortReadableFrames and
+ rptrMonitorGroupTotalFrames, and IEEE 802.3 Rptr Mgt,
+ 19.2.6.2, aReadableFrames."
+ ::= { hpRptrMonCounters 1 }
+
+ hpRptrMonGlobalOctets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The total number of octets contained in the valid
+ frames that have been received on the ports in
+ this repeater. This counter is the summation of
+ the values of the rptrMonitorPortReadableOctets
+ counter for all of the ports in this repeater.
+ Equivalently, this counter is the summation of the
+ values of the rptrMonitorGroupTotalOctets counter
+ for all of the port groups in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortReadableOctets and
+ rptrMonitorGroupTotalOctets, and IEEE 802.3 Rptr Mgt,
+ 19.2.6.2, aReadableOctets."
+ ::= { hpRptrMonCounters 2 }
+
+ hpRptrMonGlobalFCSErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each frame
+ received on any port with the FCSError signal
+ asserted and the FramingError and CollisionEvent
+ signals deasserted and whose OctetCount is greater
+ than or equal to minFrameSize and less than or
+ equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3
+ Std). This counter is the summation of the values
+ of the rptrMonitorPortFCSErrors counter for all of
+ the ports in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortFCSErrors and IEEE 802.3
+ Rptr Mgt, 19.2.6.2, aFrameCheckSequenceErrors."
+ ::= { hpRptrMonCounters 3 }
+
+ hpRptrMonGlobalAlignmentErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each frame
+ received on any port with the FCSError and
+ FramingError signals asserted and CollisonEvent
+ signal deasserted and whose OctetCount is greater
+ than or equal to minFrameSize and less than or
+ equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3
+ Std). If hpRptrMonGlobalAlignmentErrors is
+ incremented, then the hpRptrMonGlobalFCSErorrs
+ counter shall not be incremented for the same
+ frame. This counter is the summation of the
+ values of the rptrMonitorPortAlignmentErrors
+ counter for all of the ports in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortAlignmentErrors and IEEE
+ 802.3 Rptr Mgt, 19.2.6.2, aAlignmentErrors."
+ ::= { hpRptrMonCounters 4 }
+
+ hpRptrMonGlobalFrameTooLongs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each frame
+ received on any port whose OctetCount is greater
+ than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std).
+ If hpRptrMonGlobalFrameTooLongs is incremented,
+ then neither the hpRptrMonGlobalAlignmentErorrs
+ nor the hpRptrMonGlobalFCSErrors counter shall be
+ incremented for the frame. This counter is the
+ summation of the values of the
+ rptrMonitorPortFrameTooLongs counter for all of
+ the ports in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortFrameTooLongs and IEEE 802.3
+ Rptr Mgt, 19.2.6.2, aFramesTooLong"
+ ::= { hpRptrMonCounters 5 }
+
+ hpRptrMonGlobalShortEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each
+ CarrierEvent on any port with ActivityDuration
+ less than ShortEventMaxTime. ShortEventMaxTime is
+ greater than 74 bit times and less than 82 bit
+ times. ShortEventMaxTime has tolerances included
+ to provide for circuit losses between a
+ conformance test point at the AUI and the
+ measurement point within the state machine. This
+ counter is the summation of the values of the
+ rptrMonitorPortShortEvents counter for all of the
+ ports in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortShortEvents and IEEE 802.3
+ Rptr Mgt, 19.2.6.2, aShortEvents."
+ ::= { hpRptrMonCounters 6 }
+
+ hpRptrMonGlobalRunts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each
+ CarrierEvent on any port that meets one of the
+ following two conditions. Only one test need be
+ made. a) The ActivityDuration is greater than
+ ShortEventMaxTime and less than ValidPacketMinTime
+ and the CollisionEvent signal is deasserted. b)
+ The OctetCount is less than 64, the
+ ActivityDuration is greater than ShortEventMaxTime
+ and the CollisionEvent signal is deasserted.
+ ValidPacketMinTime is greater than or equal to 552
+ bit times but less than 565 bit times.
+
+ An event whose length is greater than 74 bit times
+ but less than 82 bit times shall increment either
+ the hpRptrMonGlobalShortEvents counter or the
+ hpRptrMonGlobalRunts counter but not both. A
+ CarrierEvent greater than or equal to 552 bit
+ times but less than 565 bit times may or may not
+ increment the hpRptrMonGlobalRunts counter.
+ ValidPacketMinTime has tolerances included to
+ provide for circuit losses between a conformance
+ test point at the AUI and the measurement point
+ within the state machine.
+
+ Runts usually indicate collision fragments, a
+ normal network event. This counter is the
+ summation of the values of the
+ rptrMonitorPortRunts counter for all of the ports
+ in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortRunts and IEEE 802.3 Rptr
+ Mgt, 19.2.6.2, aRunts."
+ ::= { hpRptrMonCounters 7 }
+
+ hpRptrMonGlobalCollisions OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for any
+ CarrierEvent signal on any port for which the
+ CollisionEvent signal on any port is asserted.
+
+ This counter differs from
+ rptrMonitorTransmitCollisions in that it counts
+ all collisions seen by this repeater, even those
+ involving only a single port on this repeater,
+ whereas rptrMonitorTransmitCollisions counts only
+ collisions involving multiple ports on this
+ repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortCollisions and IEEE 802.3
+ Rptr Mgt, 19.2.6.2, aCollisions."
+ ::= { hpRptrMonCounters 8 }
+
+ hpRptrMonGlobalLateEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each
+ CarrierEvent on any port in which the CollIn(X)
+ variable transitions to the value SQE (Ref:
+ 9.6.6.2, IEEE 802.3 Std) while the
+ ActivityDuration is greater than the
+ LateEventThreshold. Such a CarrierEvent is
+ counted twice, as both hpRptrMonGlobalCollisions
+ and hpRptrMonGlobalLateEvents. The
+ LateEventThreshold is greater than 480 bit times
+ and less than 565 bit times. LateEventThreshold
+ has tolerances included to permit an
+ implementation to build a single threshold to
+ serve as both the LateEventThreshold and
+ ValidPacketMinTime threshold. This counter is the
+ summation of the values of the
+ rptrMonitorPortLateEvents counter for all of the
+ ports in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortLateEvents and IEEE 802.3
+ Rptr Mgt, 19.2.6.2, aLateEvents."
+ ::= { hpRptrMonCounters 9 }
+
+ hpRptrMonGlobalVeryLongEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each
+ CarrierEvent on any port whose ActivityDuration is
+ greater than the MAU Jabber Lockup Protection
+ timer TW3 (Ref: 9.6.1 & 9.6.5, IEEE 802.3 Std).
+ Other counters may be incremented as appropriate.
+ This counter is the summation of the values of the
+ rptrMonitorPortVeryLongEvents counter for all of
+ the ports in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortVeryLongEvents and IEEE
+ 802.3 Rptr Mgt, 19.2.6.2, aVeryLongEvents."
+ ::= { hpRptrMonCounters 10 }
+
+ hpRptrMonGlobalDataRateMismatches OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each frame
+ received on any port that meets all of the
+ following conditions: a) The CollisionEvent
+ signal is not asserted. b) The ActivityDuration
+ is greater than ValidPacketMinTime. c) The
+ frequency (data rate) is detectably mismatched
+ from the local transmit frequency. The exact
+ degree of mismatch is vendor specific and is to be
+ defined by the vendor for conformance testing.
+ When this event occurs, other counters whose
+ increment conditions were satisfied may or may not
+ also be incremented. This counter is the
+ summation of the values of the
+ rptrMonitorPortDatRateMismatches counter for all
+ of the ports in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortDataRateMismatches and IEEE
+ 802.3 Rptr Mgt, 19.2.6.2, aDataRateMismatches."
+ ::= { hpRptrMonCounters 11 }
+
+ hpRptrMonGlobalAutoPartitions OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each time
+ the repeater has automatically partitioned any
+ port. The conditions that cause port partitioning
+ are specified in the partition state machine in
+ Section 9 of the IEEE 802.3 Std. This counter is
+ the summation of the values of the
+ rptrMonitorPortAutoPartitions for all of the ports
+ in this repeater."
+ REFERENCE
+ "RFC 1516 rptrMonitorPortAutoPartitions and IEEE
+ 802.3 Rptr Mgt, 19.2.6.2, aAutoPartitions."
+ ::= { hpRptrMonCounters 12 }
+
+ hpRptrMonGlobalErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ The total number of errors which have occured
+ on any port in this repeater. This counter is
+ the summation of the values of other error
+ counters, namely:
+
+ hpRptrMonGlobalFCSErrors,
+ hpRptrMonGlobalAlignmentErrors,
+ hpRptrMonGlobalFrameTooLongs,
+ hpRptrMonGlobalShortEvents,
+ hpRptrMonGlobalLateEvents,
+ hpRptrMonGlobalVeryLongEvents, and
+ hpRptrMonGlobalDataRateMismatches.
+
+ Equivalently, this counter is the summation of
+ the values of the rptrMonitorPortTotalErrors
+ counter for all of the ports in this repeater, or
+ it is the summation of the values of
+ rptrMonitorGroupTotalErrors for all of the port
+ groups in this repeater."
+ REFERENCE
+ "RFC 1516, rptrMonitorGroupTotalErrors and
+ hpRptrMonitorPortTotalErrors."
+ ::= { hpRptrMonCounters 13 }
+
+ hpRptrMonGlobalUcastPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each
+ unicast packet of valid frame length received on
+ any port. This counter is the summation of
+ hpRptrMonPortUcastPackets for all of the ports
+ in this repeater. This counter may not be
+ implemented for repeaters which do not have a
+ local network management agent."
+ ::= { hpRptrMonCounters 14 }
+
+ hpRptrMonGlobalBcastPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each
+ broadcast packet of valid frame length received on
+ any port. This counter is the summation of
+ hpRptrMonPortBcastPackets for all of the ports
+ in this repeater. This counter may not be
+ implemented for repeaters which do not have a
+ local network management agent."
+ ::= { hpRptrMonCounters 15 }
+
+ hpRptrMonGlobalMcastPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS OBJECT IS DEPRECATED *********
+
+ This counter is incremented by one for each
+ multicast packet of valid frame length received on
+ any port. This counter is the summation of
+ hpRptrMonPortMcastPackets for all of the ports in
+ this repeater. This counter may not be
+ implemented for repeaters which do not have a
+ local network management agent."
+ ::= { hpRptrMonCounters 16 }
+
+ hpRptrMonitorGroup
+ OBJECT IDENTIFIER ::= { hpRptrMonitor 2 } -- unused
+
+ hpRptrMonitorPort
+ OBJECT IDENTIFIER ::= { hpRptrMonitor 3 }
+
+ hpRptrMonPtTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HpRptrMonPtEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table of HP specific per port monitor objects."
+ ::= { hpRptrMonitorPort 1 }
+
+ hpRptrMonPtEntry OBJECT-TYPE
+ SYNTAX HpRptrMonPtEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the table, containing per port
+ objects for a single port."
+ INDEX { hpRptrMonPtGroupIndex, hpRptrMonPtPortIndex }
+ ::= { hpRptrMonPtTable 1 }
+
+ HpRptrMonPtEntry ::=
+ SEQUENCE {
+ hpRptrMonPtGroupIndex Integer32,
+ hpRptrMonPtPortIndex Integer32,
+ hpRptrMonPtUcastPackets Counter32,
+ hpRptrMonPtBcastPackets Counter32,
+ hpRptrMonPtMcastPackets Counter32
+ }
+
+ hpRptrMonPtGroupIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The group containing the port for which this
+ entry contains information. This object has the
+ same value as the corresponding instance of
+ rptrMonitorPortGroupIndex."
+ ::= { hpRptrMonPtEntry 1 }
+
+ hpRptrMonPtPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port within the group for which this entry
+ contains information. This object has the same
+ value as the corresponding instance of
+ rptrMonitorPortIndex."
+ ::= { hpRptrMonPtEntry 2 }
+
+ hpRptrMonPtUcastPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented by one for each
+ unicast packet of valid frame length received on
+ this port. This object may not be implemented for
+ repeaters which do not have a local network
+ management agent."
+ ::= { hpRptrMonPtEntry 3 }
+
+ hpRptrMonPtBcastPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented by one for each
+ broadcast packet of valid frame length received on
+ this port. This object may not be implemented for
+ repeaters which do not have a local network
+ management agent."
+ ::= { hpRptrMonPtEntry 4 }
+
+ hpRptrMonPtMcastPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented by one for each
+ multicast packet of valid frame length received on
+ this port. This object may not be implemented for
+ repeaters which do not have a local network
+ management agent."
+ ::= { hpRptrMonPtEntry 5 }
+
+
+ hpRpMauGroup OBJECT IDENTIFIER ::= { hpicfRepeater 4 }
+
+ hpRpMauTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HpRpMauEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "HP extensions to the rpMauTable."
+ ::= { hpRpMauGroup 1 }
+
+ hpRpMauEntry OBJECT-TYPE
+ SYNTAX HpRpMauEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the table, containing HP extensions
+ for a single MAU."
+ INDEX { rpMauGroupIndex, rpMauPortIndex, rpMauIndex }
+ ::= { hpRpMauTable 1 }
+
+ HpRpMauEntry ::=
+ SEQUENCE {
+ hpRpMauTypeList BITS,
+ hpRpMauAutoNegSupported TruthValue,
+ hpRpMauAutoNegAdminStatus INTEGER,
+ hpRpMauAutoNegRemoteSignaling INTEGER,
+ hpRpMauAutoNegConfig INTEGER,
+ hpRpMauAutoNegCapReceived BITS,
+ hpRpMauAutoNegRestart INTEGER
+ }
+
+ hpRpMauTypeList OBJECT-TYPE
+ SYNTAX BITS {
+ bOther(0), -- other or unknown
+ bAUI(1), -- AUI
+ b10base5(2), -- 10BASE-5
+ bFoirl(3), -- FOIRL
+
+ b10base2(4), -- 10BASE-2
+ b10baseT(5), -- 10BASE-T duplex mode unknown
+ b10baseFP(6), -- 10BASE-FP
+ b10baseFB(7), -- 10BASE-FB
+ b10baseFL(8), -- 10BASE-FL duplex mode unknown
+ b10broad36(9), -- 10BROAD36
+ b10baseTHD(10), -- 10BASE-T half duplex mode
+ b10baseTFD(11), -- 10BASE-T full duplex mode
+ b10baseFLHD(12), -- 10BASE-FL half duplex mode
+ b10baseFLFD(13), -- 10BASE-FL full duplex mode
+
+ b100baseT4(14), -- 100BASE-T4
+ b100baseTXHD(15), -- 100BASE-TX half duplex mode
+ b100baseTXFD(16), -- 100BASE-TX full duplex mode
+ b100baseFXHD(17), -- 100BASE-FX half duplex mode
+ b100baseFXFD(18), -- 100BASE-FX full duplex mode
+ b100baseT2HD(19), -- 100BASE-T2 half duplex mode
+ b100baseT2FD(20) -- 100BASE-T2 full duplex mode
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A value that uniquely identifies the set of
+ possible IEEE 802.3 types that the MAU could be. If
+ auto-negotiation is present on this MAU, this object
+ will map to hpRpMauAutoNegCapability.
+
+ Note that a repeater can never actually support the
+ full-duplex MAU types. The bits for them are
+ retained to keep the bit values consistent with
+ ifMauTypeListBits."
+ ::= { hpRpMauEntry 1 }
+
+ hpRpMauAutoNegSupported OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether or not
+ auto-negotiation is supported on this MAU."
+ ::= { hpRpMauEntry 2 }
+
+ hpRpMauAutoNegAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ autoNegotiate(1),
+ forceTo100TXHD(2),
+ forceTo10THD(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting this object to autoNegotiate(1) will cause
+ auto-negotiation to be enabled on this port.
+
+ Setting this object to forceTo100TXHD will cause
+ auto-negotiation to be disabled on this port, and
+ cause the operational type of the MAU on this port
+ (as reported by rpMauType) to transition to
+ dot3MauType100BaseTXHD.
+
+ Setting this object to forceTo10THD will cause
+ auto-negotiation to be disabled on this port, and
+ cause the operational type of the MAU on this port
+ (as reported by rpMauType) to transition to
+ dot3MauType10BaseTHD."
+ ::= { hpRpMauEntry 3 }
+
+ hpRpMauAutoNegRemoteSignaling OBJECT-TYPE
+ SYNTAX INTEGER {
+ detected(1),
+ notdetected(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A value indicating whether the remote end of the
+ link is using auto-negotiation signaling. It takes
+ the value detected(1) if and only if, during the
+ previous link negotiation, FLP Bursts were received."
+ REFERENCE "[IEEE 802.3 Mgt], 30.6.1.1.3,
+ aAutoNegRemoteSignaling."
+ ::= { hpRpMauEntry 4 }
+
+ hpRpMauAutoNegConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ configuring(2),
+ complete(3),
+ disabled(4),
+ parallelDetectFail(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A value indicating the current status of the
+ auto-negotiation process. The enumeration
+ parallelDetectFail(5) maps to a failure in parallel
+ detection as defined in 28.2.3.1 of
+ [IEEE 802.3 Std]."
+ REFERENCE "[IEEE 802.3 Mgt], 30.6.1.1.4,
+ aAutoNegAutoConfig."
+ ::= { hpRpMauEntry 5 }
+
+ hpRpMauAutoNegCapReceived OBJECT-TYPE
+ SYNTAX BITS {
+ bOther(0), -- other or unknown
+ b10baseT(1), -- 10BASE-T half duplex mode
+ b10baseTFD(2), -- 10BASE-T full duplex mode
+ b100baseT4(3), -- 100BASE-T4
+ b100baseTX(4), -- 100BASE-TX half duplex mode
+ b100baseTXFD(5), -- 100BASE-TX full duplex mode
+ b100baseT2(6), -- 100BASE-T2 half duplex mode
+ b100baseT2FD(7) -- 100BASE-T2 full duplex mode
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A value that uniquely identifies the set of
+ capabilities received from the remote
+ auto-negotiation entity.
+
+ Note that ports that support this MIB may be
+ attached to remote auto-negotiation entities which
+ have capabilities beyond the scope of this MIB."
+ REFERENCE "[IEEE 802.3 Mgt], 30.6.1.1.7,
+ aAutoNegReceivedTechnologyAbility."
+ ::= { hpRpMauEntry 6 }
+
+ hpRpMauAutoNegRestart OBJECT-TYPE
+ SYNTAX INTEGER {
+ restart(1),
+ norestart(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If the value of this object is set to restart(1)
+ then this will force auto-negotiation to begin link
+ renegotiation. If auto-negotiation signaling is
+ disabled, a write to this object has no effect.
+
+ Setting the value of this object to norestart(2) has
+ no effect."
+ REFERENCE "[IEEE 802.3 Mgt], 30.6.1.2.1,
+ acAutoNegRestartAutoConfig."
+ ::= { hpRpMauEntry 7 }
+
+
+
+ -- 802.3 Repeater Specific Traps
+
+
+ hpicfLinkBeatTrap NOTIFICATION-TYPE
+ OBJECTS { rpMauMediaAvailable }
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS NOTIFICATION IS DEPRECATED *********
+
+ A hpicfLinkBeatTrap is device type specific to ICF
+ hubs. It signifies that the hub hardware has
+ detected a change of state in a port's link beat
+ status. The current value of the port's link beat
+ status is returned in the PDU.
+
+ This trap has been deprecated. It is replaced by the
+ hpicfMediaAvailDetectTrap and the
+ hpicfMediaAvailLostTrap."
+ ::= { hpicf8023RptrTrapsPrefix 1 }
+
+ hpicfPartitionTrap NOTIFICATION-TYPE
+ OBJECTS { rptrPortAutoPartitionState }
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS NOTIFICATION IS DEPRECATED *********
+
+ A hpicfPartitionTrap is device type specific to ICF
+ hubs. It signifies that the hub hardware has
+ detected a change of state in a port's partition
+ status. The current value of the port's partition
+ status is returned in the PDU.
+
+ This trap has been deprecated. It is replaced by the
+ hpicfPortPartitionTrap and the hpicfPortHealTrap."
+ ::= { hpicf8023RptrTrapsPrefix 2 }
+
+ hpicfMediaAvailDetectTrap NOTIFICATION-TYPE
+ OBJECTS { rpMauMediaAvailable }
+ STATUS current
+ DESCRIPTION
+ "A hpicfMediaAvailDetectTraps is device type specific
+ to ICF hubs. It signifies that the hub hardware has
+ detected an instance of rpMauMediaAvailable for one
+ of the repeater's ports has entered the 'available'
+ state from some other state. Note that this trap is
+ only generated for instances of rpMauMediaAvailable
+ associated with MAUs attached to repeater ports for
+ which the corresponding instance of the
+ hpRptrPtMediaAvailTrapEnable object is equal to
+ 'true'.
+
+ The previous value of the instance of the
+ rpMauMediaAvailable object that entered the 'active'
+ state is returned in the PDU."
+ ::= { hpicf8023RptrTrapsPrefix 3 }
+
+ hpicfMediaAvailLostTrap NOTIFICATION-TYPE
+ OBJECTS { rpMauMediaAvailable }
+ STATUS current
+ DESCRIPTION
+ "A hpicfMediaAvailLostTraps is device type specific
+ to ICF hubs. It signifies that the hub hardware has
+ detected an instance of rpMauMediaAvailable for one
+ of the repeater's ports that had been in the
+ 'available' state has exited that state. Note that
+ this trap is only generated for instances of
+ rpMauMediaAvailable associated with MAUs attached to
+ repeater ports for which the corresponding instance
+ of the hpRptrPtMediaAvailTrapEnable object is equal
+ to 'true'.
+
+ The new value of the instance of the
+ rpMauMediaAvailable object that exited the 'active'
+ state is returned in the PDU."
+ ::= { hpicf8023RptrTrapsPrefix 4 }
+
+ hpicfPortPartitionTrap NOTIFICATION-TYPE
+ OBJECTS { rptrPortAutoPartitionState }
+ STATUS current
+ DESCRIPTION
+ "A hpicfPortPartitionTrap is device type specific
+ to ICF hubs. It signifies that the hub hardware has
+ detected that an instance of
+ rptrPortAutoPartitionState for one of the repeater's
+ ports has changed from the 'notAutoPartitioned' state
+ to the 'autoPartitioned' state. The current value of
+ the instance of the rptrPortAutoPartitionState for
+ the port that auto-partitioned is returned in the
+ PDU."
+ ::= { hpicf8023RptrTrapsPrefix 5 }
+
+ hpicfPortHealTrap NOTIFICATION-TYPE
+ OBJECTS { rptrPortAutoPartitionState }
+ STATUS current
+ DESCRIPTION
+ "A hpicfPortHealTrap is device type specific to ICF
+ hubs. It signifies that the hub hardware has
+ detected that an instance of
+ rptrPortAutoPartitionState for one of the repeater's
+ ports has changed from the 'autoPartitioned' state
+ to the 'notAutoPartitioned' state. The current value
+ of the instance of the rptrPortAutoPartitionState for
+ the port that healed is returned in the PDU."
+ ::= { hpicf8023RptrTrapsPrefix 6 }
+
+
+ -- Conformance information
+
+ hpicf8023RptrConformance
+ OBJECT IDENTIFIER ::= { hpicf8023RptrMib 1 }
+
+ hpicf8023RptrCompliances
+ OBJECT IDENTIFIER ::= { hpicf8023RptrConformance 1 }
+ hpicf8023RptrGroups
+ OBJECT IDENTIFIER ::= { hpicf8023RptrConformance 2 }
+
+
+ -- Compliance statements
+
+ hpicf8023RptrCompliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS COMPLIANCE IS DEPRECATED *********
+
+ The compliance statement for HP extensions to the
+ 802.3 Repeater MIB for HP AdvanceStack 802.3
+ repeaters."
+ MODULE
+ MANDATORY-GROUPS { hpicf8023RptrBasicGroup,
+ hpicf8023RptrMonitorGroup,
+ hpicf8023RptrNotifyGroup }
+
+ ::= { hpicf8023RptrCompliances 1 }
+
+ hpicf8023RptrSlaveCompliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS COMPLIANCE IS DEPRECATED *********
+
+ The compliance statement for HP extensions to the
+ 802.3 Repeater MIB for HP AdvanceStack 802.3
+ slave repeaters."
+ MODULE
+ MANDATORY-GROUPS { hpicf8023RptrBasicSlaveGroup,
+ hpicf8023RptrMonitorSlaveGroup,
+ hpicf8023RptrNotifyGroup }
+
+ ::= { hpicf8023RptrCompliances 2 }
+
+ hpicf8023MultiRptrCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for HP extensions to the
+ 802.3 Repeater MIB for HP AdvanceStack 802.3
+ repeaters. This compliance supports devices
+ with multiple repeater segments, as well as
+ devices with a single repeater segment."
+ MODULE
+ MANDATORY-GROUPS { hpicf8023MultiRptrBasicGroup,
+ hpicf8023MultiRptrMonitorGroup,
+ hpicf8023MultiRptrNotifyGroup }
+
+ ::= { hpicf8023RptrCompliances 3 }
+
+ hpicf8023RptrAutoNegCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for HP extensions to the
+ 802.3 Repeater MIB for HP AdvanceStack 802.3
+ repeaters. This compliance supports devices
+ with multiple repeater segments, as well as
+ devices with a single repeater segment. It also
+ supports repeater devices with auto-negotiation."
+ MODULE
+ MANDATORY-GROUPS { hpicf8023MultiRptrBasicGroup,
+ hpicf8023MultiRptrMonitorGroup,
+ hpicf8023MultiRptrNotifyGroup }
+
+ GROUP hpicf8023RpMauAutoNegGroup
+ DESCRIPTION "Implementation of this group is required for
+ MAUs that support auto-negotiation."
+
+ ::= { hpicf8023RptrCompliances 4 }
+
+
+ -- Units of conformance
+
+ hpicf8023RptrBasicGroup OBJECT-GROUP
+ OBJECTS { hpRptrEntityName,
+ hpRptrThinlanFault,
+ hpRptrSqeEnabled,
+ hpRptrRobustHealing,
+ hpRptrGrpGroupIndex,
+ hpRptrGrpPortsAdminStatus,
+ hpRptrGrpPortsSegStatus,
+ hpRptrGrpPortsMediaAvailable,
+ hpRptrGrpPortsLinkbeatEnabled,
+ hpRptrGrpPortsOperStatus,
+ hpRptrPtGroupIndex,
+ hpRptrPtPortIndex,
+ hpRptrPtLinkbeatEnable,
+ hpRptrPtPolarityReversed
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS GROUP IS DEPRECATED *********
+
+ A collection of HP specific extensions to the
+ 802.3 Repeater MIB for the HP AdvanceStack product
+ line."
+ ::= { hpicf8023RptrGroups 1 }
+
+ hpicf8023RptrBasicSlaveGroup OBJECT-GROUP
+ OBJECTS { hpRptrEntityName,
+ hpRptrThinlanFault,
+ hpRptrSqeEnabled,
+ hpRptrGrpGroupIndex,
+ hpRptrGrpPortsAdminStatus,
+ hpRptrGrpPortsSegStatus,
+ hpRptrGrpPortsMediaAvailable,
+ hpRptrGrpPortsLinkbeatEnabled,
+ hpRptrGrpPortsOperStatus,
+ hpRptrPtGroupIndex,
+ hpRptrPtPortIndex,
+ hpRptrPtLinkbeatEnable,
+ hpRptrPtPolarityReversed
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS GROUP IS DEPRECATED *********
+
+ A collection of HP specific extensions to the
+ 802.3 Repeater MIB for HP AdvanceStack slaves."
+ ::= { hpicf8023RptrGroups 2 }
+
+ hpicf8023RptrMonitorGroup OBJECT-GROUP
+ OBJECTS { hpRptrMonGlobalFrames,
+ hpRptrMonGlobalOctets,
+ hpRptrMonGlobalFCSErrors,
+ hpRptrMonGlobalAlignmentErrors,
+ hpRptrMonGlobalFrameTooLongs,
+ hpRptrMonGlobalShortEvents,
+ hpRptrMonGlobalRunts,
+ hpRptrMonGlobalCollisions,
+ hpRptrMonGlobalLateEvents,
+ hpRptrMonGlobalVeryLongEvents,
+ hpRptrMonGlobalDataRateMismatches,
+ hpRptrMonGlobalAutoPartitions,
+ hpRptrMonGlobalErrors,
+ hpRptrMonGlobalUcastPackets,
+ hpRptrMonGlobalBcastPackets,
+ hpRptrMonGlobalMcastPackets,
+ hpRptrMonPtGroupIndex,
+ hpRptrMonPtPortIndex,
+ hpRptrMonPtUcastPackets,
+ hpRptrMonPtBcastPackets,
+ hpRptrMonPtMcastPackets
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS GROUP IS DEPRECATED *********
+
+ A collection of extended counters for 802.3
+ repeaters in the HP AdvanceStack product line."
+ ::= { hpicf8023RptrGroups 3 }
+
+ hpicf8023RptrMonitorSlaveGroup OBJECT-GROUP
+ OBJECTS { hpRptrMonGlobalFrames,
+ hpRptrMonGlobalOctets,
+ hpRptrMonGlobalFCSErrors,
+ hpRptrMonGlobalAlignmentErrors,
+ hpRptrMonGlobalFrameTooLongs,
+ hpRptrMonGlobalShortEvents,
+ hpRptrMonGlobalRunts,
+ hpRptrMonGlobalCollisions,
+ hpRptrMonGlobalLateEvents,
+ hpRptrMonGlobalVeryLongEvents,
+ hpRptrMonGlobalDataRateMismatches,
+ hpRptrMonGlobalAutoPartitions,
+ hpRptrMonGlobalErrors
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS GROUP IS DEPRECATED *********
+
+ A collection of extended counters for HP
+ AdvanceStack 802.3 slave repeaters."
+ ::= { hpicf8023RptrGroups 4 }
+
+ hpicf8023MultiRptrBasicGroup OBJECT-GROUP
+ OBJECTS { hpRptrPtGroupIndex,
+ hpRptrPtPortIndex,
+ hpRptrPtLinkbeatEnable,
+ hpRptrPtPolarityReversed,
+ hpRptrPtSqeEnabled,
+ hpRptrPtMediaAvailTrapEnable,
+ hpRptrPtLongCableEnable
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of HP specific extensions to the
+ 802.3 Repeater MIB for products in the HP
+ AdvanceStack product line. This group supports
+ devices with multiple repeater segments as well
+ as devices with a single repeater segment."
+ ::= { hpicf8023RptrGroups 5 }
+
+ hpicf8023MultiRptrMonitorGroup OBJECT-GROUP
+ OBJECTS { hpRptrMonPtGroupIndex,
+ hpRptrMonPtPortIndex,
+ hpRptrMonPtUcastPackets,
+ hpRptrMonPtBcastPackets,
+ hpRptrMonPtMcastPackets
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of extended counters for 802.3
+ repeaters in the HP AdvanceStack product line.
+ This group supports devices with multiple
+ repeater segments as well as devices with a
+ single repeater segment."
+ ::= { hpicf8023RptrGroups 6 }
+
+ hpicf8023RptrNotifyGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { hpicfLinkBeatTrap,
+ hpicfPartitionTrap
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "********* THIS GROUP IS DEPRECATED *********
+
+ A collection of notifications used to indicate
+ changes in port status for 802.3 repeaters in the
+ HP AdvanceStack product line."
+ ::= { hpicf8023RptrGroups 7 }
+
+ hpicf8023MultiRptrNotifyGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { hpicfMediaAvailDetectTrap,
+ hpicfMediaAvailLostTrap,
+ hpicfPortPartitionTrap,
+ hpicfPortHealTrap
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of notifications used to indicate
+ changes in port status for 802.3 repeaters in the
+ HP AdvanceStack product line. Notifications in
+ this group use different traps for good->bad than
+ are used for bad->good (similar to linkUp/linkDown)."
+ ::= { hpicf8023RptrGroups 8 }
+
+ hpicf8023RpMauAutoNegGroup OBJECT-GROUP
+ OBJECTS { hpRpMauTypeList,
+ hpRpMauAutoNegSupported,
+ hpRpMauAutoNegAdminStatus,
+ hpRpMauAutoNegRemoteSignaling,
+ hpRpMauAutoNegConfig,
+ hpRpMauAutoNegCapReceived,
+ hpRpMauAutoNegRestart
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for managing MAUs attached
+ to repeater ports with managed auto-negotiation."
+ ::= { hpicf8023RptrGroups 9 }
+
+ hpicf8023Rptr100BasicGroup OBJECT-GROUP
+ OBJECTS { hpRptrPtGroupIndex,
+ hpRptrPtPortIndex,
+ hpRptrPtPolarityReversed,
+ hpRptrPtMediaAvailTrapEnable
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of HP specific extensions to the
+ 802.3 Repeater MIB for products in the HP
+ AdvanceStack product line. This group supports
+ devices with multiple repeater segments as well
+ as devices with a single repeater segment. This
+ group supports devices with 100BaseT repeater
+ segments."
+ ::= { hpicf8023RptrGroups 10 }
+
+ END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 13:28:41 +0000