diff options
Diffstat (limited to 'MIBS/hp/HP-SwitchStack-MIB')
| -rw-r--r-- | MIBS/hp/HP-SwitchStack-MIB | 523 |
1 files changed, 523 insertions, 0 deletions
diff --git a/MIBS/hp/HP-SwitchStack-MIB b/MIBS/hp/HP-SwitchStack-MIB new file mode 100644 index 0000000..0c659d8 --- /dev/null +++ b/MIBS/hp/HP-SwitchStack-MIB @@ -0,0 +1,523 @@ +HP-SwitchStack-MIB DEFINITIONS ::= BEGIN + + IMPORTS + OBJECT-TYPE, MODULE-IDENTITY, Integer32, IpAddress + FROM SNMPv2-SMI + OBJECT-GROUP, MODULE-COMPLIANCE + FROM SNMPv2-CONF + RowStatus, MacAddress + FROM SNMPv2-TC + hpSwitch + FROM HP-ICF-OID; + + hpSwitchVirtualStackMib MODULE-IDENTITY + LAST-UPDATED "200011032344Z" -- November 3, 2000 + ORGANIZATION "Hewlett Packard Company, + Network Infrastructure Solutions" + CONTACT-INFO "Hewlett Packard Company + 8000 Foothills Blvd. + Roseville, CA 95747" + DESCRIPTION "This MIB module describes objects for managing + the Stacking features of devices in the HP + Integrated Communication Facility product line." + + REVISION "200011032344Z" -- November 3, 2000 + DESCRIPTION "Initial version of this MIB module." + + ::= { hpSwitch 10 } + + + -- Configuration support for Stacking + + hpSwitchStackConfig OBJECT IDENTIFIER ::= { hpSwitchVirtualStackMib 1 } + + hpSwitchStackAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + candidate(1), + disabled(2), + member(3), + command(4), + pending(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The operational status of the stacking feature." + ::= { hpSwitchStackConfig 1 } + + hpSwitchStackCommandAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This variable is only valid if + 'hpSwitchStackAdminStatus' has been set 'member'. + This is the MAC address of the command switch for + this member." + ::= { hpSwitchStackConfig 2 } + + hpSwitchStackName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..20)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This variable is only valid if + 'hpSwitchStackAdminStatus' has been set + 'command-switch'. This is the name of the stack for + which this switch is serving as the command switch + (maximum length of 20 characters)." + ::= { hpSwitchStackConfig 3 } + + hpSwitchStackPropagate OBJECT-TYPE + SYNTAX INTEGER{ + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Enable/disable SNMP community propagation. This + variable is only valid if 'hpSwitchStackAdminStatus' + has been set to 'command-switch'." + ::= { hpSwitchStackConfig 4 } + + hpSwitchStackAutoJoin OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Enable/disable auto join on stack. This variable + is only valid for candidate switch." + ::= { hpSwitchStackConfig 5 } + + hpSwitchStackAutoGrab OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Enable/disable auto grab on stack. This variable + is only valid if 'hpSwitchStackAdminStatus' has been + set to 'command-switch'." + ::= { hpSwitchStackConfig 6 } + + + hpSwitchStackConfigMemberTable OBJECT-TYPE + SYNTAX SEQUENCE OF HpSwitchStackConfigMemberEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table that contains a group of member switches + configured to be in this switch's stack." + ::= { hpSwitchVirtualStackMib 2 } + + hpSwitchStackConfigMemberEntry OBJECT-TYPE + SYNTAX HpSwitchStackConfigMemberEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A group of member switches configured to be in this + switch's stack." + INDEX { hpSwitchStackMemberSwitchNum } + ::= { hpSwitchStackConfigMemberTable 1 } + + HpSwitchStackConfigMemberEntry ::= + SEQUENCE { + hpSwitchStackMemberSwitchNum Integer32, + hpSwitchStackMemberMacAddr MacAddress, + hpSwitchStackMemberPassword OCTET STRING, + hpSwitchStackMemberEntryStatus RowStatus + } + + hpSwitchStackMemberSwitchNum OBJECT-TYPE + SYNTAX Integer32 (1..15) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "An index that uniquely identifies the member switch + associated with this row entry." + ::= { hpSwitchStackConfigMemberEntry 1 } + + hpSwitchStackMemberMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION "The MAC Address that identifies the member switch." + ::= { hpSwitchStackConfigMemberEntry 2 } + + hpSwitchStackMemberPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..17)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION "The manager password configured on the member switch. + This object always returns a 0 length octet string + when read." + ::= { hpSwitchStackConfigMemberEntry 3 } + + hpSwitchStackMemberEntryStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION "The status of a stack member entry." + ::= { hpSwitchStackConfigMemberEntry 4 } + + -- Status support for Stacking + + hpStackStats OBJECT IDENTIFIER ::= { hpSwitchVirtualStackMib 3 } + + hpStackStatsName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The stack name of this switch." + ::= { hpStackStats 1 } + + hpStackStatsMembersNum OBJECT-TYPE + SYNTAX Integer32 (0..32) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of members switches that have joined this + switch's stack. This variable is only valid if this + switch has been set as a 'command-switch'." + ::= { hpStackStats 2 } + + hpStackStatsMembersUnreachable OBJECT-TYPE + SYNTAX Integer32 (0..32) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of unreachable member switches. This + variable is only valid if this switch has been set as + a 'command-switch'." + ::= { hpStackStats 3 } + + hpStackStatsMemberID OBJECT-TYPE + SYNTAX Integer32 (0..32) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number by which member switch is known on the + stack." + ::= { hpStackStats 4 } + + hpStackStatsMgmtIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The IP address of the Stack manager switch (command + switch). This variable is only valid if this switch + has been set as a 'member-switch'." + ::= { hpStackStats 5 } + + hpStackStatsStackingStatus OBJECT-TYPE + SYNTAX INTEGER { + joined(1), -- joined successfully + pending(2), -- join pending + noReponse(3), -- No response from command switch + notCommand(4), -- Not a command switch + stackFull(5), -- Stack full on command switch + remoteFailure(6), -- Unknown remote failure + unknownFailure(7), -- Unknown failure + evicted(8), -- Evicted by command switch + commandUp(9), -- command switch is up + commandDown(10), -- command switch is down + unusedStatus(11), -- Status not currently used + undiscovered(12) -- Undiscovered switch + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of this switch. This variable is only + valid if this switch has been set as a 'member-switch'." + ::= { hpStackStats 6 } + + + hpStackStatsMembersTable OBJECT-TYPE + SYNTAX SEQUENCE OF HpStackStatsMemberEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table containing the member switches that have + joined this switch's stack." + ::= { hpSwitchVirtualStackMib 4 } + + hpStackStatsMemberEntry OBJECT-TYPE + SYNTAX HpStackStatsMemberEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The information assosiated with each row in the + member table." + INDEX { hpStackStatsMemberSwitchIndx } + ::= { hpStackStatsMembersTable 1 } + + HpStackStatsMemberEntry ::= + SEQUENCE { + hpStackStatsMemberSwitchIndx Integer32, + hpStackStatsMemberMacAddr MacAddress, + hpStackStatsMemberSystemName OCTET STRING, + hpStackStatsMemberDeviceType OCTET STRING, + hpStackStatsMemberOperStatus INTEGER + } + + hpStackStatsMemberSwitchIndx OBJECT-TYPE + SYNTAX Integer32 (0..32) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The index identifying the member switch." + ::= { hpStackStatsMemberEntry 1 } + + hpStackStatsMemberMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The MAC address of the member switch." + ::= { hpStackStatsMemberEntry 2 } + + hpStackStatsMemberSystemName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The system name of the member switch." + ::= { hpStackStatsMemberEntry 3 } + + hpStackStatsMemberDeviceType OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The device type of the member switch." + ::= { hpStackStatsMemberEntry 4 } + + hpStackStatsMemberOperStatus OBJECT-TYPE + SYNTAX INTEGER { + pending(1), -- join pending + joined(2), -- joined + noReponse(3), -- No response from + -- member switch + stackingDisabled(4), -- Stacking disabled + invalidPassword(5), -- Invalid password + commanderAnotherStack(6), -- Commander of another + -- stack + remoteFailure(7), -- Remote failure + unknownFailure(8), -- Unknown failure + rejected(9), -- rejected by command + -- switch + memberUp(10), -- member switch is up + memberDown(11), -- member switch is down + commanderThisStack(12), -- Commander of this stack + unusedStatus(13), -- Status not currently + -- being used + undiscovered(14) -- Undiscovered switch + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current state of the member switch." + ::= { hpStackStatsMemberEntry 5 } + + -- Configuration support for Discovery Protocol + hpSwitchDiscoveryConfig OBJECT IDENTIFIER ::= + { hpSwitchVirtualStackMib 5 } + + hpSwitchDiscoveryAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The operational status of the discovery protocol." + ::= { hpSwitchDiscoveryConfig 1 } + + hpSwitchDiscoveryTransmissionInterval OBJECT-TYPE + SYNTAX Integer32 (1..300) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The interval between the sending out of new + discovery packets." + ::= { hpSwitchDiscoveryConfig 2 } + + + -- Status support for Discovery Protocol + + hpDiscoverStatsCandidatesTable OBJECT-TYPE + SYNTAX SEQUENCE OF HpDiscoverStatsCandidateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table containing the switches that have been + discovered as a candidates to form a stack." + ::= { hpSwitchVirtualStackMib 6 } + + hpDiscoverStatsCandidateEntry OBJECT-TYPE + SYNTAX HpDiscoverStatsCandidateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The information assosiated with each row in the + candidate table." + INDEX { hpDiscoverStatsCandidateMacAddr } + ::= { hpDiscoverStatsCandidatesTable 1 } + + HpDiscoverStatsCandidateEntry ::= + SEQUENCE { + hpDiscoverStatsCandidateMacAddr MacAddress, + hpDiscoverStatsCandidateSystemName OCTET STRING, + hpDiscoverStatsCandidateDeviceType OCTET STRING + } + + hpDiscoverStatsCandidateMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The MAC address of the candidate switch. Used as + an index identifying row in the table." + ::= { hpDiscoverStatsCandidateEntry 1 } + + hpDiscoverStatsCandidateSystemName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The system name of the candidate switch." + ::= { hpDiscoverStatsCandidateEntry 2 } + + hpDiscoverStatsCandidateDeviceType OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The device type of the candidate switch." + ::= { hpDiscoverStatsCandidateEntry 3 } + + hpDiscoverStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF HpDiscoverStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table containing the switches that have been + discovered on the network." + ::= { hpSwitchVirtualStackMib 7 } + + hpDiscoverStatsEntry OBJECT-TYPE + SYNTAX HpDiscoverStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The information assosiated with each row in the + discover table." + INDEX { hpDiscoverStatsSwitchIndex } + ::= { hpDiscoverStatsTable 1 } + + HpDiscoverStatsEntry ::= + SEQUENCE { + hpDiscoverStatsSwitchIndex Integer32, + hpDiscoverStatsSwitchStackName OCTET STRING, + hpDiscoverStatsSwitchMacAddr MacAddress, + hpDiscoverStatsSwitchSystemName OCTET STRING, + hpDiscoverStatsSwitchStatus OCTET STRING + } + + hpDiscoverStatsSwitchIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The index identifying the row in the table." + ::= { hpDiscoverStatsEntry 1 } + + hpDiscoverStatsSwitchStackName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The stack name of the discovered switch." + ::= { hpDiscoverStatsEntry 2 } + + hpDiscoverStatsSwitchMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The MAC address of the discovered switch." + ::= { hpDiscoverStatsEntry 3 } + + hpDiscoverStatsSwitchSystemName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The system name of the discovered switch." + ::= { hpDiscoverStatsEntry 4 } + + hpDiscoverStatsSwitchStatus OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..35)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the discovered switch." + ::= { hpDiscoverStatsEntry 5 } + + + + hpSwitchVirtualStackMibConformance + OBJECT IDENTIFIER ::= { hpSwitchVirtualStackMib 8 } + + hpSwitchVirtualStackMibCompliances + OBJECT IDENTIFIER ::= { hpSwitchVirtualStackMibConformance 1} + + hpSwitchVirtualStackMibGroups + OBJECT IDENTIFIER ::= { hpSwitchVirtualStackMibConformance 2} + + hpSwitchVirtualStackMibCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for devices implementing the + HP Stack Mib." + MODULE + MANDATORY-GROUPS { hpSwitchStackConfigGroup, + hpSwitchStackStatsGroup, + hpSwitchDiscoverConfigGroup, + hpDiscoverStatsGroup } + ::= { hpSwitchVirtualStackMibCompliances 1 } + + + + hpSwitchStackConfigGroup OBJECT-GROUP + OBJECTS { hpSwitchStackAdminStatus, + hpSwitchStackCommandAddr, + hpSwitchStackName, + hpSwitchStackPropagate, + hpSwitchStackAutoJoin, + hpSwitchStackAutoGrab, + hpSwitchStackMemberSwitchNum, + hpSwitchStackMemberMacAddr, + hpSwitchStackMemberPassword, + hpSwitchStackMemberEntryStatus + } + STATUS current + DESCRIPTION "A collection of objects for configuring a stack." + ::= { hpSwitchVirtualStackMibGroups 1 } + + hpSwitchStackStatsGroup OBJECT-GROUP + OBJECTS { hpStackStatsName, + hpStackStatsMembersNum, + hpStackStatsMembersUnreachable, + hpStackStatsMemberID, + hpStackStatsMgmtIpAddr, + hpStackStatsStackingStatus, + hpStackStatsMemberSwitchIndx, + hpStackStatsMemberMacAddr, + hpStackStatsMemberSystemName, + hpStackStatsMemberDeviceType, + hpStackStatsMemberOperStatus + } + STATUS current + DESCRIPTION "A collection of objects for determining state + and status of a stack." + ::= { hpSwitchVirtualStackMibGroups 2 } + + hpSwitchDiscoverConfigGroup OBJECT-GROUP + OBJECTS { hpSwitchDiscoveryAdminStatus, + hpSwitchDiscoveryTransmissionInterval + } + STATUS current + DESCRIPTION "A collection of objects for configuring the + state of the stack discovery protocol." + ::= { hpSwitchVirtualStackMibGroups 3 } + + hpDiscoverStatsGroup OBJECT-GROUP + OBJECTS { hpDiscoverStatsCandidateMacAddr, + hpDiscoverStatsCandidateSystemName, + hpDiscoverStatsCandidateDeviceType, + hpDiscoverStatsSwitchIndex, + hpDiscoverStatsSwitchStackName, + hpDiscoverStatsSwitchMacAddr, + hpDiscoverStatsSwitchSystemName, + hpDiscoverStatsSwitchStatus + } + STATUS current + DESCRIPTION "A collection of objects for viewing the + discovered devices by the stack discovery + protocol." + ::= { hpSwitchVirtualStackMibGroups 4 } + +END |