diff options
Diffstat (limited to 'MIBS/hp/HP-VLAN-CAR-MIB')
| -rw-r--r-- | MIBS/hp/HP-VLAN-CAR-MIB | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/MIBS/hp/HP-VLAN-CAR-MIB b/MIBS/hp/HP-VLAN-CAR-MIB new file mode 100644 index 0000000..47912a1 --- /dev/null +++ b/MIBS/hp/HP-VLAN-CAR-MIB @@ -0,0 +1,256 @@ +-- ***************************************************************** +-- Foundry Commited Access Rate MIB file. +-- ***************************************************************** +HP-VLAN-CAR-MIB DEFINITIONS ::= BEGIN + +IMPORTS + OBJECT-TYPE, + Gauge + FROM RFC1155-SMI + + Counter64 + FROM SNMPv2-SMI + + PacketSource, RateLimitType, RateLimitAction + FROM HP-CAR-MIB + + snVLanCAR + FROM HP-SN-SWITCH-GROUP-MIB; + + + +snVLanCARs OBJECT IDENTIFIER ::= { snVLanCAR 1 } + + + +snVLanCARTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnVLanCAREntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of rate limit configuration entries for a vlan. + Rate Limit is a method of traffic control. It allows a set + of rate limits to be configured and applied to packets flowing + into/out of an interface to regulate network traffic." + + ::= { snVLanCARs 1 } + + +snVLanCAREntry OBJECT-TYPE + SYNTAX SnVLanCAREntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A collection of rate-limit configuration objects on this + vlan." + INDEX { snVLanCARVLanId, snVLanCARDirection, snVLanCARRowIndex } + ::= { snVLanCARTable 1 } + +SnVLanCAREntry ::= + SEQUENCE { + snVLanCARDirection + PacketSource, + snVLanCARVLanId + INTEGER, + snVLanCARRowIndex + INTEGER, + snVLanCARType + RateLimitType, + snVLanCARAccIdx + INTEGER, + snVLanCARRate + INTEGER, + snVLanCARLimit + INTEGER, + snVLanCARExtLimit + INTEGER, + snVLanCARConformAction + RateLimitAction, + snVLanCARExceedAction + RateLimitAction, + snVLanCARStatSwitchedPkts + Counter64, + snVLanCARStatSwitchedBytes + Counter64, + snVLanCARStatFilteredPkts + Counter64, + snVLanCARStatFilteredBytes + Counter64, + snVLanCARStatCurBurst + Gauge + } + +--need to refer to the vlan table +--index once it is changed to single +--vlan id as the row index + +snVLanCARVLanId OBJECT-TYPE + SYNTAX INTEGER (1..4095) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The VLAN ID as one of the indices of this table . + Each VLAN ID can have a membership of multiple + ports." + ::= { snVLanCAREntry 1 } + +snVLanCARDirection OBJECT-TYPE + SYNTAX PacketSource + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The input or output transmission direction for the + Rate Limit object." + ::= { snVLanCAREntry 2 } + +snVLanCARRowIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The table index for rate limit objects. + It increases as the rate limit entries are added. + Skips the number when a row is deleted." + + ::= { snVLanCAREntry 3 } + +snVLanCARType OBJECT-TYPE + SYNTAX RateLimitType + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of traffic rate-limited against." + + ::= { snVLanCAREntry 4 } + +snVLanCARAccIdx OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The index to the access list if RateLimitType is either + quickAcc or standardAcc." + + ::= { snVLanCAREntry 5 } + +snVLanCARRate OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The comitted access rate. This determines the long term + average transmission rate. Traffic that falls under this + rate always conforms. This is average rate in bits per + second." + + ::= { snVLanCAREntry 6 } + +snVLanCARLimit OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is the normal burst size that determines how large traffic + bursts can be before some traffic exceeds the rate limit. This + specifies the number of bytes that are guaranteed to be transported + by the network at the average rate under normal conditions during + committed time interval. This normal burst size is in bytes." + + ::= { snVLanCAREntry 7 } + +snVLanCARExtLimit OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is the extended burst limit that determines how large traffic + bursts can be before all the traffic exceeds the rate limit. This + burst size is in bytes. " + + ::= { snVLanCAREntry 8 } + +snVLanCARConformAction OBJECT-TYPE + SYNTAX RateLimitAction + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Action to be taken when the traffic is within + the Rate Limit. + drop drop the packet. + xmit transmit the packet. + continue continue to evaluate to the subsequent + rate limits. + precedXmit rewrite the IP precedence and transmit + the packet. + precedCont rewrite the IP precedence and allow it + evaluated by subsequent rate limits." + + ::= { snVLanCAREntry 9 } + +snVLanCARExceedAction OBJECT-TYPE + SYNTAX RateLimitAction + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Action to be taken when the traffic exceeds + the Rate Limit. + drop drop the packet. + xmit transmit the packet. + continue continue to evaluate to the subsequent + rate limits. + precedXmit rewrite the IP precedence and transmit + the packet. + precedCont rewrite the IP precedence and allow it + evaluated by subsequent rate limits." + + ::= { snVLanCAREntry 10 } + +snVLanCARStatSwitchedPkts OBJECT-TYPE + SYNTAX Counter64 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The counter of packets permitted by this rate limit." + + ::= { snVLanCAREntry 11 } + +snVLanCARStatSwitchedBytes OBJECT-TYPE + SYNTAX Counter64 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The counter of bytes permitted by this interface." + + ::= { snVLanCAREntry 12 } + +snVLanCARStatFilteredPkts OBJECT-TYPE + SYNTAX Counter64 + --UNITS "packets" + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The counter of packets which exceeded this rate limit." + + ::= { snVLanCAREntry 13 } + +snVLanCARStatFilteredBytes OBJECT-TYPE + SYNTAX Counter64 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The counter of bytes which exceeded this rate limit." + + ::= { snVLanCAREntry 14 } + +snVLanCARStatCurBurst OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current received burst size." + ::= { snVLanCAREntry 15 } + +-- end of snVLanCARTable + + +END |