diff options
Diffstat (limited to 'MIBS/hpmsm/COLUBRIS-IEEE802DOT11.my')
| -rw-r--r-- | MIBS/hpmsm/COLUBRIS-IEEE802DOT11.my | 3539 |
1 files changed, 3539 insertions, 0 deletions
diff --git a/MIBS/hpmsm/COLUBRIS-IEEE802DOT11.my b/MIBS/hpmsm/COLUBRIS-IEEE802DOT11.my new file mode 100644 index 0000000..659cb7f --- /dev/null +++ b/MIBS/hpmsm/COLUBRIS-IEEE802DOT11.my @@ -0,0 +1,3539 @@ +-- **************************************************************************** +-- COLUBRIS-802DOT11-MIB definitions +-- +-- Copyright (c) 2004, Colubris Networks, Inc. +-- All Rights Reserved. +-- +-- Colubris Networks IEEE802.11 MIB file. +-- +-- **************************************************************************** + + +COLUBRIS-802DOT11-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + Integer32, Unsigned32, Counter32, IpAddress, TimeTicks + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, + DisplayString, MacAddress, TruthValue + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + ifIndex, ifDescr, InterfaceIndex + FROM IF-MIB + coVirtualAccessPointConfigEntry, coVirtualApSSID + FROM COLUBRIS-VIRTUAL-AP-MIB + colubrisMgmtV2 + FROM COLUBRIS-SMI + ColubrisSSIDOrNone, ColubrisNotificationEnable, ColubrisDataRate, ColubrisRadioType + FROM COLUBRIS-TC +; + + +colubris802dot11 MODULE-IDENTITY + LAST-UPDATED "200802210000Z" + ORGANIZATION "Colubris Networks, Inc." + CONTACT-INFO "Colubris Networks + Postal: 200 West Street Ste 300 + Waltham, Massachusetts 02451-1121 + UNITED STATES + Phone: +1 781 684 0001 + Fax: +1 781 684 0009 + + E-mail: cn-snmp@colubris.com" + DESCRIPTION "The MIB module for IEEE 802.11 entities." + + ::= { colubrisMgmtV2 4 } + + +-- *** Major sections ********************************************************* + +-- Access Point Attributes + -- DEFINED AS "The Access Access object class provides the necessary + -- support at the station to manage the processes in the station + -- such that the station may work cooperatively as a part of an + -- IEEE 802.11 network."; + + coDot11ap OBJECT IDENTIFIER ::= { colubris802dot11 1 } + + -- coDot11ap GROUPS + -- coDot11AccessPointConfigTable ::= { coDot11ap 1 } + -- coDot11AuthenticationAlgorithmsTable ::= { coDot11ap 2 } + -- coDot11WEPDefaultKeysTable ::= { coDot11ap 3 } + -- coDot11PrivacyTable ::= { coDot11ap 4 } + -- coDot11AssociationTable ::= { coDot11ap 5 } + -- coDot11WDSPortTable ::= { coDot11ap 6 } + -- coDot11ScanTable ::= { coDot11ap 7 } + +-- MAC Attributes + -- DEFINED AS "The MAC object class provides the necessary support + -- for the access control, generation, and verification of frame check + -- sequences, and proper delivery of valid data to upper layers."; + + coDot11mac OBJECT IDENTIFIER ::= { colubris802dot11 2 } + + -- MAC GROUPS + -- reference IEEE Std 802.1f-1993 + -- coDot11OperationTable ::= { coDot11mac 1 } + -- coDot11CountersTable ::= { coDot11mac 2 } + +-- PHY Attributes + -- DEFINED AS "The PHY object class provides the necessary support + -- for required PHY operational information that may vary from PHY + -- to PHY and from STA to STA to be communicated to upper layers." + + coDot11phy OBJECT IDENTIFIER ::= { colubris802dot11 3 } + + -- phy GROUPS + -- coDot11PhyOperationTable ::= { coDot11phy 1 } + -- coDot11PhyAntennaTable ::= { coDot11phy 2 } + -- coDot11PhyConfigTable ::= { coDot11phy 3 } + -- coDot11PhyDSSSTable ::= { coDot11phy 4 } + -- coDot11RegDomainsSupportedTable ::= { coDot11phy 5 } + -- coDot11AntennasListTable ::= { coDot11phy 6 } + -- coDot11SupportedDataRatesTxTable ::= { coDot11phy 7 } + -- coDot11SupportedDataRatesRxTable ::= { coDot11phy 8 } + -- coDot11PhyOFDMTable ::= { coDot11phy 9 } + -- coDot11PhyHTTable ::= { coDot11phy 14 } + + +-- *** Textual conventions from 802 definitions ******************************* + WEPKeytype ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION "Textual conventions from 802 definitions." + SYNTAX OCTET STRING (SIZE (0|5|13)) + + +-- *** Access Point Config Table ********************************************** +coDot11AccessPointConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11AccessPointConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "WLAN profile configuration attributes. In tablular form to + allow for multiple instances on an agent. Not supported on + the WCB-200." + ::= { coDot11ap 1 } + +coDot11AccessPointConfigEntry OBJECT-TYPE + SYNTAX CoDot11AccessPointConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11AccessPointConfigTable. + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + coVirtualWlanProfileIndex - Uniquely access a profile for this + particular 802.11 interface." + AUGMENTS { coVirtualAccessPointConfigEntry } + ::= { coDot11AccessPointConfigTable 1 } + +CoDot11AccessPointConfigEntry ::= SEQUENCE +{ + coDot11RelayBetweenStation TruthValue, + coDot11BeaconPeriod Integer32, + coDot11DTIMPeriod Integer32, + coDot11PrivacyOptionImplemented TruthValue, + coDot11RSNAOptionImplemented TruthValue, + coDot11NumberOfUsers Unsigned32, + coDot11AddToAssociationNotification TruthValue, + coDot11PhyTxPowerAdminLevel Integer32, + coDot11PhyTxPowerOperLevel Integer32, + coDot11CurrentSNRLevel Integer32, + coDot11BSSID MacAddress, + coDot11AdminMinimumDataRate ColubrisDataRate, + coDot11AdminMaximumDataRate ColubrisDataRate, + coDot11HighThroughputOptionImplemented TruthValue +} + +coDot11RelayBetweenStation OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies if wireless client stations can exchange data + with one another." + ::= { coDot11AccessPointConfigEntry 1 } + +coDot11BeaconPeriod OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the number of TUs that a station uses for + scheduling Beacon transmissions. This value is + transmitted in Beacon and Probe Response frames." + ::= { coDot11AccessPointConfigEntry 2 } + +coDot11DTIMPeriod OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies the number of beacon intervals that elapses + between transmission of Beacons frames containing a TIM + element whose DTIM Count field is 0. This value is + transmitted in the DTIM Period field of Beacon frames. + Client stations use the DTIM to wake up from low-power + mode to receive multicast traffic." + ::= { coDot11AccessPointConfigEntry 3 } + +coDot11PrivacyOptionImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates if the IEEE 802.11 WEP option is enabled." + ::= { coDot11AccessPointConfigEntry 4 } + +coDot11RSNAOptionImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates if the profile is RSNA-capable." + ::= { coDot11AccessPointConfigEntry 5 } + +coDot11NumberOfUsers OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the number of users connected via this profile." + ::= { coDot11AccessPointConfigEntry 6 } + +coDot11AddToAssociationNotification OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies if an association trap notification is sent + each time a user connects to this profile." + ::= { coDot11AccessPointConfigEntry 7 } + +coDot11PhyTxPowerAdminLevel OBJECT-TYPE + SYNTAX Integer32 (0..23) + UNITS "dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies the transmission power of the radio. + On Intersil hardware, only a few specific values are allowed. + + { 13, 17, 23 } for North America, + + { 13, 17, 20 } for Europe and the rest of the world." + ::= { coDot11AccessPointConfigEntry 8 } + +coDot11PhyTxPowerOperLevel OBJECT-TYPE + SYNTAX Integer32 (0..23) + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Transmission power of the radio." + ::= { coDot11AccessPointConfigEntry 9 } + +coDot11CurrentSNRLevel OBJECT-TYPE + SYNTAX Integer32 (0..92) + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Average SNR level for all the connected client stations." + ::= { coDot11AccessPointConfigEntry 10 } + +coDot11BSSID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "MAC Address assigned to this device." + ::= { coDot11AccessPointConfigEntry 11 } + +coDot11AdminMinimumDataRate OBJECT-TYPE + SYNTAX ColubrisDataRate + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION "Specifies the minimum transmission rate that clients stations + must meet in order to connect with this profile. Client stations + that are below this setting will not be able to connect. + The value of this object must always be less or equal + than the value of coDot11MaximumDataRate. + + Allowed values will change according to the state of the + radio's wireless mode (coDot11CurrentOperPHYType). + + ieee802dot11b: Lowest, 1, 2, 5.5, and 11 Meg + + ieee802dot11a: Lowest, 6, 9, 12, 18, 24, 36, 48, and 54 Meg + + ieee802dot11g: Lowest, 6, 9, 12, 18, 24, 36, 48, and 54 Meg + + 11bAndg: All rates permitted." + + ::= { coDot11AccessPointConfigEntry 12 } + +coDot11AdminMaximumDataRate OBJECT-TYPE + SYNTAX ColubrisDataRate + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION "Specifies the maximum transmission rate that clients stations + must respect to connect with this profile. Clients stations + that attempt to associate at a higher data rate will be refused. + + The value of this object must always be greater than the value of + coDot11MinimumDataRate. + + Allowed values will change according to the state of the + radio's wireless mode (coDot11CurrentOperPHYType). + + ieee802dot11b: 1, 2, 5.5, 11Meg and highest + + ieee802dot11a: 6, 9, 12, 18, 24, 36, 48, 54 Meg, and highest + + ieee802dot11g: 6, 9, 12, 18, 24, 36, 48, 54 Meg, and highest + + 11bAndg: All rates permitted." + ::= { coDot11AccessPointConfigEntry 13 } + +coDot11HighThroughputOptionImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates if the profile is 802.11n capable." + ::= { coDot11AccessPointConfigEntry 14 } + + +-- *** End of Access Point config Table *************************************** + + +-- *** Authentication Algorithms Table **************************************** +coDot11AuthenticationAlgorithmsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11AuthenticationAlgorithmsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This (conceptual) table of attributes is a set of all the + authentication algorithms supported by the stations. + The following are the default values and the associated + algorithm: + Value = 1: Open System + Value = 2: Shared Key" + REFERENCE "IEEE Std 802.11-1997, 7.3.1.1" + ::= { coDot11ap 2 } + +coDot11AuthenticationAlgorithmsEntry OBJECT-TYPE + SYNTAX CoDot11AuthenticationAlgorithmsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An Entry (conceptual row) in the Authentication Algorithms + Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coDot11AuthenticationAlgorithmsIndex - Uniquely identify an + algorithm in the table." + INDEX { ifIndex, coDot11AuthenticationAlgorithmsIndex } + ::= { coDot11AuthenticationAlgorithmsTable 1 } + +CoDot11AuthenticationAlgorithmsEntry ::= SEQUENCE +{ + coDot11AuthenticationAlgorithmsIndex Integer32, + coDot11AuthenticationAlgorithm INTEGER, + coDot11AuthenticationAlgorithmsEnable TruthValue +} + +coDot11AuthenticationAlgorithmsIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The auxiliary variable used to identify instances of the + columnar objects in the Authentication Algorithms Table." + ::= { coDot11AuthenticationAlgorithmsEntry 1 } + +coDot11AuthenticationAlgorithm OBJECT-TYPE + SYNTAX INTEGER + { + openSystem (1), + sharedKey (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Identifies all the authentication algorithms supported by + the STAs. The following are the default values and the + their associated algorithms. + Value = 1: Open System + Value = 2: Shared Key" + ::= { coDot11AuthenticationAlgorithmsEntry 2 } + +coDot11AuthenticationAlgorithmsEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute, when true at a station, enables the + acceptance of the authentication algorithm described in the + corresponding table entry in authentication frames received by + the station that have odd authentication sequence numbers. + The default value of this attribute is 'true' for the + Open System table entry and 'false' for all other table + entries." + ::= { coDot11AuthenticationAlgorithmsEntry 3 } + +-- *** End of Authentication Algorithms Table ********************************* + + +-- *** WEP Default Keys Table ************************************************* +coDot11WEPDefaultKeysTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11WEPDefaultKeysEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Conceptual table for WEP default keys. This table + contains the four WEP default secret key values + corresponding to the four possible KeyID values. The WEP + default secret keys are logically WRITE-ONLY. Attempts to + read the entries in this table will return unsuccessful + status and values of null or zero. The default value of + each WEP default key is null. This table is not supported + on the WCB-200." + REFERENCE "IEEE Std 802.11-1997, 8.3.2" + ::= { coDot11ap 3 } + +coDot11WEPDefaultKeysEntry OBJECT-TYPE + SYNTAX CoDot11WEPDefaultKeysEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An Entry (conceptual row) in the WEP Default Keys Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coVirtualWlanProfileIndex - Uniquely access a profile for this + particular 802.11 interface." + AUGMENTS { coVirtualAccessPointConfigEntry } + ::= { coDot11WEPDefaultKeysTable 1 } + +CoDot11WEPDefaultKeysEntry ::= SEQUENCE +{ + coDot11WEPDefaultKey1Value WEPKeytype, + coDot11WEPDefaultKey2Value WEPKeytype, + coDot11WEPDefaultKey3Value WEPKeytype, + coDot11WEPDefaultKey4Value WEPKeytype +} + +coDot11WEPDefaultKey1Value OBJECT-TYPE + SYNTAX WEPKeytype + MAX-ACCESS read-write + STATUS current + DESCRIPTION "A WEP default secret key1 value. + Reading this attribute will always return a Zero-Length string." + ::= { coDot11WEPDefaultKeysEntry 1 } + +coDot11WEPDefaultKey2Value OBJECT-TYPE + SYNTAX WEPKeytype + MAX-ACCESS read-write + STATUS current + DESCRIPTION "A WEP default secret key2 value. + Reading this attribute will always return a Zero-Length string." + ::= { coDot11WEPDefaultKeysEntry 2 } + +coDot11WEPDefaultKey3Value OBJECT-TYPE + SYNTAX WEPKeytype + MAX-ACCESS read-write + STATUS current + DESCRIPTION "A WEP default secret key3 value. + Reading this attribute will always return a Zero-Length string." + ::= { coDot11WEPDefaultKeysEntry 3 } + +coDot11WEPDefaultKey4Value OBJECT-TYPE + SYNTAX WEPKeytype + MAX-ACCESS read-write + STATUS current + DESCRIPTION "A WEP default secret key4 value. + Reading this attribute will always return a Zero-Length string." + ::= { coDot11WEPDefaultKeysEntry 4 } + +-- *** End of WEP Default Keys Table ****************************************** + + +-- *** Privacy Table ********************************************************** +coDot11PrivacyTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11PrivacyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Group containing attributes related to IEEE 802.11 + Privacy. In tabular form to allow multiple instances on + an agent. This table is not supported on the WCB-200." + ::= { coDot11ap 4 } + +coDot11PrivacyEntry OBJECT-TYPE + SYNTAX CoDot11PrivacyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11PrivacyTable Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coVirtualWlanProfileIndex - Uniquely access a profile for this + particular 802.11 interface." + AUGMENTS { coVirtualAccessPointConfigEntry } + ::= { coDot11PrivacyTable 1 } + +CoDot11PrivacyEntry ::= SEQUENCE +{ + coDot11PrivacyInvoked TruthValue, + coDot11WEPDefaultKeyID Integer32, + coDot11ExcludeUnencrypted TruthValue, + coDot11WEPICVErrorCount Counter32, + coDot11WEPExcludedCount Counter32, + coDot11RSNAEnabled TruthValue +} + +coDot11PrivacyInvoked OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "When this attribute is TRUE, it indicates that some level + of security is invoked for transmitting frames of type Data. + For IEEE 802.11-1999 clients, the security mechanism used is + WEP. For RSNA-capable clients, an additional variable + coDot11RSNAEnabled indicates whether RSNA is enabled. If + coDot11RSNAEnabled is FALSE or the MIB variable does not exist, + the security mechanism invoked is WEP; if coDot11RSNAEnabled is + TRUE, RSNA security mechanisms invoked are configured in the + coDot11RSNAConfigTable. The default value of this attribute + is FALSE." + ::= { coDot11PrivacyEntry 1 } + +coDot11WEPDefaultKeyID OBJECT-TYPE + SYNTAX Integer32 (0..3) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This attribute indicates the use of the first, second, + third, or fourth element of the WEPDefaultKeys array when set + to values of zero, one, two, or three. The default value of + this attribute is 0." + REFERENCE "IEEE Std 802.11-1997, 8.3.2" + ::= { coDot11PrivacyEntry 2 } + +coDot11ExcludeUnencrypted OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "When this attribute is true, the STA does not indicate at + the MAC service interface received MSDUs that have the WEP + subfield of the Frame Control field equal to zero. When this + attribute is false, the STA may accept MSDUs that have the WEP + subfield of the Frame Control field equal to zero. The default + value of this attribute shall be true." + ::= { coDot11PrivacyEntry 3 } + +coDot11WEPICVErrorCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter increments when a frame is received with the + WEP subfield of the Frame Control field set to one and the + value of the ICV as received in the frame does not match the + ICV value that is calculated for the contents of the received + frame. ICV errors for TKIP are not counted in this variable + but in coDot11RSNAStatsTKIPICVErrors." + ::= { coDot11PrivacyEntry 4 } + +coDot11WEPExcludedCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter increments when a frame is received with + the WEP subfield of the Frame Control field set to zero and + the value of coDot11ExcludeUnencrypted causes that frame to + be discarded." + ::= { coDot11PrivacyEntry 5 } + +coDot11RSNAEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates if RSNA is enabled, which means that the RSN + Information Element is advertised in Beacons and Probe + Responses. This object requires that coDot11PrivacyInvoked + also be set to TRUE." + ::= { coDot11PrivacyEntry 6 } + +-- *** End of Privacy Table *************************************************** + + +-- *** Association Table ****************************************************** +coDot11AssociationTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11AssociationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Group containing attributes related to associated stations. + In tabular form to allow multiple instances on an agent. This + table is not supported on the WCB-200." + ::= { coDot11ap 5 } + +coDot11AssociationEntry OBJECT-TYPE + SYNTAX CoDot11AssociationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11Association Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coDot11AssociationIndex - Uniquely identify a device inside the + association table." + INDEX { ifIndex, coDot11AssociationIndex } + ::= { coDot11AssociationTable 1 } + +CoDot11AssociationEntry ::= SEQUENCE +{ + coDot11AssociationIndex Integer32, + coDot11StationMACAddress MacAddress, + coDot11StationConnectTime Counter32, + coDot11SignalLevel Integer32, + coDot11NoiseLevel Integer32, + coDot11SNR Integer32, + coDot11PktsRate1 Counter32, + coDot11PktsRate2 Counter32, + coDot11PktsRate5dot5 Counter32, + coDot11PktsRate11 Counter32, + coDot11PktsRate6 Counter32, + coDot11PktsRate9 Counter32, + coDot11PktsRate12 Counter32, + coDot11PktsRate18 Counter32, + coDot11PktsRate24 Counter32, + coDot11PktsRate36 Counter32, + coDot11PktsRate48 Counter32, + coDot11PktsRate54 Counter32, + coDot11TransmitRate Unsigned32, + coDot11ReceiveRate Unsigned32, + coDot11InPkts Counter32, + coDot11OutPkts Counter32, + coDot11InOctets Counter32, + coDot11OutOctets Counter32, + coDot11StationSSID ColubrisSSIDOrNone, + coDot11StationName OCTET STRING, + coDot11StationIPAddress IpAddress, + coDot11StationVLAN Integer32, + coDot11StationLocalInterface InterfaceIndex, + coDot11StaHT TruthValue +} + +coDot11AssociationIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The auxiliary variable used to identify instances of the + columnar objects in the Association Table." + ::= { coDot11AssociationEntry 1 } + +coDot11StationMACAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Unique MAC Address assigned to the device." + ::= { coDot11AssociationEntry 2 } + +coDot11StationConnectTime OBJECT-TYPE + SYNTAX Counter32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Elapsed time in seconds since a station has associated + to this device." + ::= { coDot11AssociationEntry 3 } + +coDot11SignalLevel OBJECT-TYPE + SYNTAX Integer32 + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Strength of the wireless signal." + ::= { coDot11AssociationEntry 4 } + +coDot11NoiseLevel OBJECT-TYPE + SYNTAX Integer32 + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Level of local background noise." + ::= { coDot11AssociationEntry 5 } + +coDot11SNR OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Relative strength of the signal level compared to the noise + level." + ::= { coDot11AssociationEntry 6 } + +coDot11PktsRate1 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 1 Mbit/s." + ::= { coDot11AssociationEntry 7 } + +coDot11PktsRate2 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 2 Mbit/s." + ::= { coDot11AssociationEntry 8 } + +coDot11PktsRate5dot5 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 5.5 Mbit/s." + ::= { coDot11AssociationEntry 9 } + +coDot11PktsRate11 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 11 Mbit/s." + ::= { coDot11AssociationEntry 10 } + +coDot11PktsRate6 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 6 Mbit/s." + ::= { coDot11AssociationEntry 11 } + +coDot11PktsRate9 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 9 Mbit/s." + ::= { coDot11AssociationEntry 12 } + +coDot11PktsRate12 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 12 Mbit/s." + ::= { coDot11AssociationEntry 13 } + +coDot11PktsRate18 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 18 Mbit/s." + ::= { coDot11AssociationEntry 14 } + +coDot11PktsRate24 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 24 Mbit/s." + ::= { coDot11AssociationEntry 15 } + +coDot11PktsRate36 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 36 Mbit/s." + ::= { coDot11AssociationEntry 16 } + +coDot11PktsRate48 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 48 Mbit/s." + ::= { coDot11AssociationEntry 17 } + +coDot11PktsRate54 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of frames received at 54 Mbit/s." + ::= { coDot11AssociationEntry 18 } + +coDot11TransmitRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "500Kb/s" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current transmit rate of a station." + ::= { coDot11AssociationEntry 19 } + +coDot11ReceiveRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "500Kb/s" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current receive rate of a station." + ::= { coDot11AssociationEntry 20 } + +coDot11InPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of packets received from the station after + the association." + ::= { coDot11AssociationEntry 21 } + +coDot11OutPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of packets send to the station after + the association." + ::= { coDot11AssociationEntry 22 } + +coDot11InOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of octets received from the station after + the association." + ::= { coDot11AssociationEntry 23 } + +coDot11OutOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of octets send to the station after + the association." + ::= { coDot11AssociationEntry 24 } + +coDot11StationSSID OBJECT-TYPE + SYNTAX ColubrisSSIDOrNone + MAX-ACCESS read-only + STATUS current + DESCRIPTION "SSID of the associated station." + ::= { coDot11AssociationEntry 25 } + +coDot11StationName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name of the associated station." + ::= { coDot11AssociationEntry 26 } + +coDot11StationIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "IP address of the associated station." + ::= { coDot11AssociationEntry 27 } + +coDot11StationVLAN OBJECT-TYPE + SYNTAX Integer32 (0..4094) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "VLAN ID of the associated station. + This object is always available on satellite devices. + However, on access-controller devices, this object is + only available under certain conditions, when the client + station is connected to a profile that is + not access-controlled." + ::= { coDot11AssociationEntry 28 } + +coDot11StationLocalInterface OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Specifies the Local Interface where the associated station + traffic will be forwarded to." + ::= { coDot11AssociationEntry 29 } + +coDot11StaHT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates that the associated station is HT." + ::= { coDot11AssociationEntry 30 } + +-- *** End of Association Table *********************************************** + + +-- *** WDS port Table ********************************************************* +coDot11WDSPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11WDSPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Conceptual table for the WDS Ports. This table contains + the six WDS MAC address. This table is not supported on + the WCB-200." + ::= { coDot11ap 6 } + +coDot11WDSPortEntry OBJECT-TYPE + SYNTAX CoDot11WDSPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An Entry (conceptual row) in the WDS Port Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coDot11WDSPortIndex - Uniquely identify a WDS port inside the + WDS table." + INDEX { ifIndex, coDot11WDSPortIndex } + ::= { coDot11WDSPortTable 1 } + +CoDot11WDSPortEntry ::= SEQUENCE +{ + coDot11WDSPortIndex Integer32, + coDot11WDSPortMacAddress MacAddress, + coDot11WDSPortCurrentRate Unsigned32, + coDot11WDSPortSNRLevel Integer32, + coDot11WDSPortTxPackets Counter32, + coDot11WDSPortTxDropped Counter32, + coDot11WDSPortTxErrors Counter32, + coDot11WDSPortRxPackets Counter32, + coDot11WDSPortRxDropped Counter32, + coDot11WDSPortRxErrors Counter32 +} + +coDot11WDSPortIndex OBJECT-TYPE + SYNTAX Integer32 (1..6) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The auxiliary variable used to identify instances of WDS + ports." + ::= { coDot11WDSPortEntry 1 } + +coDot11WDSPortMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "MAC address of the remote device on the other side of the link." + ::= { coDot11WDSPortEntry 2 } + +coDot11WDSPortCurrentRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current rate of the WDS port." + ::= { coDot11WDSPortEntry 3 } + +coDot11WDSPortSNRLevel OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Relative strength of the signal level compared to the noise + level." + ::= { coDot11WDSPortEntry 4 } + +coDot11WDSPortTxPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of packets transmitted on this WDS port." + ::= { coDot11WDSPortEntry 5 } + +coDot11WDSPortTxDropped OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of packets that could not be transmitted on this WDS + port." + ::= { coDot11WDSPortEntry 6 } + +coDot11WDSPortTxErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of packets that could not be sent due to the following + reasons: Rx retry limit exceeded or Tx discarded because of + wrong SA." + ::= { coDot11WDSPortEntry 7 } + +coDot11WDSPortRxPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of packets received on this WDS port." + ::= { coDot11WDSPortEntry 8 } + +coDot11WDSPortRxDropped OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of packets that were dropped on this WDS port due to + a lack of resources." + ::= { coDot11WDSPortEntry 9 } + +coDot11WDSPortRxErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of packets that could not be received due to the + following reasons: Rx discards WEP excluded, Rx discards WEP + ICV error, Rx MSG in bad MSG fragments, Rx MSG in MSG fragments + Rx WEP undecryptable, Rx FCS errors." + ::= { coDot11WDSPortEntry 10 } + +-- *** End of WDS port Table ************************************************** + + +-- *** Scan Table ************************************************************* +coDot11ScanTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11ScanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Conceptual table for the AP scanning results. In tabular form + to allow multiple instances on an agent. This table is not + supported on the WCB-200." + ::= { coDot11ap 7 } + +coDot11ScanEntry OBJECT-TYPE + SYNTAX CoDot11ScanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An Entry (conceptual row) in the AP scan Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by ifIndex. + + coDot11ScanIndex - Uniquely identify an AP in the scan Table." + INDEX { ifIndex, coDot11ScanIndex } + ::= { coDot11ScanTable 1 } + +CoDot11ScanEntry ::= SEQUENCE +{ + coDot11ScanIndex Integer32, + coDot11ScanMacAddress MacAddress, + coDot11ScanChannel Integer32, + coDot11ScanSSID ColubrisSSIDOrNone, + coDot11ScanSignalLevel Integer32, + coDot11ScanNoiseLevel Integer32, + coDot11ScanSNR Integer32, + coDot11ScanStatus INTEGER, + coDot11ScanPHYType INTEGER, + coDot11ScanInactivityTime TimeTicks +} + +coDot11ScanIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The auxiliary variable used to identify instances of AP in the + scan table." + ::= { coDot11ScanEntry 1 } + +coDot11ScanMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The wireless MAC address of the remote device." + ::= { coDot11ScanEntry 2 } + +coDot11ScanChannel OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The operating frequency channel of the remote device." + ::= { coDot11ScanEntry 3 } + +coDot11ScanSSID OBJECT-TYPE + SYNTAX ColubrisSSIDOrNone + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The Service Set ID broadcast by the remote device." + ::= { coDot11ScanEntry 4 } + +coDot11ScanSignalLevel OBJECT-TYPE + SYNTAX Integer32 + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Strength of the wireless signal." + ::= { coDot11ScanEntry 5 } + +coDot11ScanNoiseLevel OBJECT-TYPE + SYNTAX Integer32 + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Level of local background noise." + ::= { coDot11ScanEntry 6 } + +coDot11ScanSNR OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Relative strength of the signal level compared to the noise + level." + ::= { coDot11ScanEntry 7 } + +coDot11ScanStatus OBJECT-TYPE + SYNTAX INTEGER + { + unknown(0), + authorized(1), + unauthorized(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the scanned device. + 'unknown': The device could not determine the + status of the scanned AP. + 'authorized': The AP is part of the authorized list of APs. + 'unauthorized': The AP is not part of the authorized + list of APs." + ::= { coDot11ScanEntry 8 } + +coDot11ScanPHYType OBJECT-TYPE + SYNTAX INTEGER + { + ieee802dot11a(1), + ieee802dot11b(2), + ieee802dot11g(3), + ieee802dot11na(4), + ieee802dot11ng(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Radio type used by the device." + ::= { coDot11ScanEntry 9 } + +coDot11ScanInactivityTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Elapsed time since the last beacon was seen for this device." + ::= { coDot11ScanEntry 10 } + + +-- *** End of Scan Table ****************************************************** + + +-- *** Configuration of the AP Scan process *********************************** +coDot11ScanEnabled OBJECT-TYPE + SYNTAX INTEGER + { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies if periodic scan should be performed or not. + Not supported on the WCB-200. + + 'enable': Enables periodic scans on this device. + + 'disable': Disable periodic scans on this device." + ::= { coDot11ap 8 } + +coDot11ScanPeriodicity OBJECT-TYPE + SYNTAX Integer32 (10..3600) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies the time between periodic scans. Each time a scan + operation is performed, only one frequency is scanned. A fair + amount of periodic scans are needed in order complete a full + scan of all the supported frequencies. This parameter only + applies when coDot11ScanEnabled is set to 'enable'. + Not supported on the WCB-200." + DEFVAL { 600 } + ::= { coDot11ap 9 } + +coDot11ScanAuthorizedListURL OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies the URL of the file that contains a list of all + authorized access points. If no valid URL is present in this + field, the AP will no be able to compute the rogue table. + The format of this file is XML. Each entry in the file + is composed of two items: MAC address and SSID. Each + entry should appear on a new line. Not supported on the + WCB-200." + ::= { coDot11ap 10 } + +coDot11UnauthorizedAPNotificationEnabled OBJECT-TYPE + SYNTAX ColubrisNotificationEnable + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies if periodic coDot11UnauthorizedAPNotification events + are generated. Not supported on the WCB-200." + DEFVAL { enable } + ::= { coDot11ap 11 } + +coDot11UnauthorizedAPNotificationInterval OBJECT-TYPE + SYNTAX Integer32 (1..1000000) + UNITS "minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Interval in minutes between unauthorized AP notifications. + Not supported on the WCB-200." + ::= { coDot11ap 12 } + +coDot11AssociationNotificationEnabled OBJECT-TYPE + SYNTAX ColubrisNotificationEnable + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies if coDot11AssociationNotification events are + generated. Not supported on the WCB-200." + DEFVAL { disable } + ::= { coDot11ap 13 } + +coDot11AssociationNotificationInterval OBJECT-TYPE + SYNTAX Integer32 (0..1000000) + UNITS "minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Interval in minutes between association notifications. + Setting this attribute to 0 will disable periodic sending + of association notification. Not supported on the WCB-200." + ::= { coDot11ap 14 } + +-- *** End of Configuration of the AP Scan process **************************** + +-- *** Station HT Table ****************************************************** +coDot11StationHTTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11StationHTEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Group containing attributes related to HT stations. + This table is not supported on the WCB-200." + ::= { coDot11ap 15 } + +coDot11StationHTEntry OBJECT-TYPE + SYNTAX CoDot11StationHTEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the station HT Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coDot11AssociationIndex - Uniquely identify a device inside the + association table." + AUGMENTS { coDot11AssociationEntry } + ::= { coDot11StationHTTable 1 } + +CoDot11StationHTEntry ::= SEQUENCE +{ + coDot11StaTransmitMCS Unsigned32, + coDot11StaReceiveMCS Unsigned32, + coDot11StaChannelWidth INTEGER, + coDot11StaShortGI TruthValue, + coDot11StaPktsTxMCS0 Counter32, + coDot11StaPktsTxMCS1 Counter32, + coDot11StaPktsTxMCS2 Counter32, + coDot11StaPktsTxMCS3 Counter32, + coDot11StaPktsTxMCS4 Counter32, + coDot11StaPktsTxMCS5 Counter32, + coDot11StaPktsTxMCS6 Counter32, + coDot11StaPktsTxMCS7 Counter32, + coDot11StaPktsTxMCS8 Counter32, + coDot11StaPktsTxMCS9 Counter32, + coDot11StaPktsTxMCS10 Counter32, + coDot11StaPktsTxMCS11 Counter32, + coDot11StaPktsTxMCS12 Counter32, + coDot11StaPktsTxMCS13 Counter32, + coDot11StaPktsTxMCS14 Counter32, + coDot11StaPktsTxMCS15 Counter32, + coDot11StaPktsRxMCS0 Counter32, + coDot11StaPktsRxMCS1 Counter32, + coDot11StaPktsRxMCS2 Counter32, + coDot11StaPktsRxMCS3 Counter32, + coDot11StaPktsRxMCS4 Counter32, + coDot11StaPktsRxMCS5 Counter32, + coDot11StaPktsRxMCS6 Counter32, + coDot11StaPktsRxMCS7 Counter32, + coDot11StaPktsRxMCS8 Counter32, + coDot11StaPktsRxMCS9 Counter32, + coDot11StaPktsRxMCS10 Counter32, + coDot11StaPktsRxMCS11 Counter32, + coDot11StaPktsRxMCS12 Counter32, + coDot11StaPktsRxMCS13 Counter32, + coDot11StaPktsRxMCS14 Counter32, + coDot11StaPktsRxMCS15 Counter32 +} + +coDot11StaTransmitMCS OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "MSC used while trasnmitting the last frame to the HT + station." + ::= { coDot11StationHTEntry 1 } + +coDot11StaReceiveMCS OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "MCS used by the last frame received from the HT station." + ::= { coDot11StationHTEntry 2 } + +coDot11StaChannelWidth OBJECT-TYPE + SYNTAX INTEGER + { + cw20MHz(1), + cw40MHz(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Channel width used by the wireless client." + ::= { coDot11StationHTEntry 3 } + +coDot11StaShortGI OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates if the wireless client is using short GI." + ::= { coDot11StationHTEntry 4 } + +coDot11StaPktsTxMCS0 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS0." + ::= { coDot11StationHTEntry 5 } + +coDot11StaPktsTxMCS1 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS1." + ::= { coDot11StationHTEntry 6 } + +coDot11StaPktsTxMCS2 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS2." + ::= { coDot11StationHTEntry 7 } + +coDot11StaPktsTxMCS3 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS3." + ::= { coDot11StationHTEntry 8 } + +coDot11StaPktsTxMCS4 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS4." + ::= { coDot11StationHTEntry 9 } + +coDot11StaPktsTxMCS5 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS5." + ::= { coDot11StationHTEntry 10 } + +coDot11StaPktsTxMCS6 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS6." + ::= { coDot11StationHTEntry 11 } + +coDot11StaPktsTxMCS7 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS7." + ::= { coDot11StationHTEntry 12 } + +coDot11StaPktsTxMCS8 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS8." + ::= { coDot11StationHTEntry 13 } + +coDot11StaPktsTxMCS9 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS9." + ::= { coDot11StationHTEntry 14 } + +coDot11StaPktsTxMCS10 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS10." + ::= { coDot11StationHTEntry 15 } + +coDot11StaPktsTxMCS11 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS11." + ::= { coDot11StationHTEntry 16 } + +coDot11StaPktsTxMCS12 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS12." + ::= { coDot11StationHTEntry 17 } + +coDot11StaPktsTxMCS13 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS13." + ::= { coDot11StationHTEntry 18 } + +coDot11StaPktsTxMCS14 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS14." + ::= { coDot11StationHTEntry 19 } + +coDot11StaPktsTxMCS15 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of transmitted frames while using MCS15." + ::= { coDot11StationHTEntry 20 } + +coDot11StaPktsRxMCS0 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS0." + ::= { coDot11StationHTEntry 21 } + +coDot11StaPktsRxMCS1 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS1." + ::= { coDot11StationHTEntry 22 } + +coDot11StaPktsRxMCS2 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS2." + ::= { coDot11StationHTEntry 23 } + +coDot11StaPktsRxMCS3 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS3." + ::= { coDot11StationHTEntry 24 } + +coDot11StaPktsRxMCS4 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS4." + ::= { coDot11StationHTEntry 25 } + +coDot11StaPktsRxMCS5 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS5." + ::= { coDot11StationHTEntry 26 } + +coDot11StaPktsRxMCS6 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS6." + ::= { coDot11StationHTEntry 27 } + +coDot11StaPktsRxMCS7 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS7." + ::= { coDot11StationHTEntry 28 } + +coDot11StaPktsRxMCS8 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS8." + ::= { coDot11StationHTEntry 29 } + +coDot11StaPktsRxMCS9 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS9." + ::= { coDot11StationHTEntry 30 } + +coDot11StaPktsRxMCS10 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS10." + ::= { coDot11StationHTEntry 31 } + +coDot11StaPktsRxMCS11 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS11." + ::= { coDot11StationHTEntry 32 } + +coDot11StaPktsRxMCS12 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS12." + ::= { coDot11StationHTEntry 33 } + +coDot11StaPktsRxMCS13 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS13." + ::= { coDot11StationHTEntry 34 } + +coDot11StaPktsRxMCS14 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS14." + ::= { coDot11StationHTEntry 35 } + +coDot11StaPktsRxMCS15 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of received frames while using MCS15." + ::= { coDot11StationHTEntry 36 } + +-- *** End of Station HT Table *********************************************** + + +-- *** MAC Attribute Templates ************************************************ + + +-- *** Operation Table ******************************************************** +coDot11OperationTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11OperationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Group contains MAC attributes pertaining to the operation of + the MAC. In tabular form to allow multiple instances on an + agent." + ::= { coDot11mac 1 } + +coDot11OperationEntry OBJECT-TYPE + SYNTAX CoDot11OperationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11OperationEntry Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex." + INDEX { ifIndex } + ::= { coDot11OperationTable 1 } + +CoDot11OperationEntry ::= SEQUENCE +{ + coDot11MACAddress MacAddress, + coDot11RTSThreshold Integer32, + coDot11ShortRetryLimit Integer32, + coDot11LongRetryLimit Integer32, + coDot11FragmentationThreshold Integer32, + coDot11MaxTransmitMSDULifetime Unsigned32, + coDot11MaxReceiveLifetime Unsigned32, + coDot11ManufacturerID DisplayString, + coDot11ProductID DisplayString, + coDot11RadioType ColubrisRadioType +} + +coDot11MACAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Unique MAC Address assigned to the STA." + ::= { coDot11OperationEntry 1 } + +coDot11RTSThreshold OBJECT-TYPE + SYNTAX Integer32 (128..1540|2347) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicated the number of octets in an MPDU, + below which an RTS/CTS handshake is not performed. An + RTS/CTS handshake is performed at the beginning of any + frame exchange sequence where the MPDU is of type Data or + Management, the MPDU has an individual address in the Address1 + field, and the length of the MPDU is greater than + this threshold. (For additional details, refer to Table 21 in + 9.7.) Setting this attribute to be larger than the maximum + MSDU size has the effect of turning off the RTS/CTS + handshake for frames of Data or Management type transmitted by + this STA. The default value of this attribute is 2347." + ::= { coDot11OperationEntry 2 } + +coDot11ShortRetryLimit OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the maximum number of transmission attempts of a + frame, the length of which is less than or equal to + coDot11RTSThreshold, that are made before a failure condition + is indicated. The default value of this attribute is 7." + ::= { coDot11OperationEntry 3 } + +coDot11LongRetryLimit OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the maximum number of transmission attempts of a + frame, the length of which is greater than + coDot11RTSThreshold, that shall be made before a + failure condition is indicated. The default value of this + attribute is 4." + ::= { coDot11OperationEntry 4 } + +coDot11FragmentationThreshold OBJECT-TYPE + SYNTAX Integer32 (256..2346) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the current maximum size, in octets, of the MPDU + that may be delivered to the PHY. An MSDU is broken down into + fragments if its size exceeds the value of this attribute + after adding MAC headers and trailers. An MSDU or MMPDU is + fragmented when the resulting frame has an individual address + in the Address1 field, and the length of the frame is larger + than this threshold. The default value for this attribute is + the lesser of 2346 or the aMPDUMaxLength of the attached PHY + and will never exceed the lesser of 2346 or the aMPDUMaxLength + of the attached PHY. The value of this attribute will never + be less than 256. " + ::= { coDot11OperationEntry 5 } + +coDot11MaxTransmitMSDULifetime OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Elapsed time in TU after the initial transmission of an MSDU, + after which further attempts to transmit the MSDU are + terminated. The default value of this attribute is 512." + ::= { coDot11OperationEntry 6 } + +coDot11MaxReceiveLifetime OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Elapsed time in TU, after the initial reception of a + fragmented MMPDU or MSDU, after which further attempts to + reassemble the MMPDU or MSDU is terminated. The default + value is 512." + ::= { coDot11OperationEntry 7 } + +coDot11ManufacturerID OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the manufacturer. It may include additional + information at the manufacturer's discretion. The default + value of this attribute is null." + ::= { coDot11OperationEntry 8 } + +coDot11ProductID OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "An identifier that is unique to the manufacturer. It may + include additional information at the manufacturer's + discretion. The default value is null." + ::= { coDot11OperationEntry 9 } + +coDot11RadioType OBJECT-TYPE + SYNTAX ColubrisRadioType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Identify the wireless device inside the Colubris product." + ::= { coDot11OperationEntry 10 } + +-- *** End of Operation Table ************************************************* + + +-- *** Counters Table ********************************************************* +coDot11CountersTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11CountersEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Group containing attributes that are MAC counters. In tabular + form to allow multiple instance on an agent." + ::= { coDot11mac 2 } + +coDot11CountersEntry OBJECT-TYPE + SYNTAX CoDot11CountersEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11CountersEntry Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex." + INDEX { ifIndex } + ::= { coDot11CountersTable 1 } + +CoDot11CountersEntry ::= SEQUENCE +{ + coDot11TransmittedFragmentCount Counter32, + coDot11MulticastTransmittedFrameCount Counter32, + coDot11FailedCount Counter32, + coDot11RetryCount Counter32, + coDot11MultipleRetryCount Counter32, + coDot11FrameDuplicateCount Counter32, + coDot11RTSSuccessCount Counter32, + coDot11RTSFailureCount Counter32, + coDot11ACKFailureCount Counter32, + coDot11ReceivedFragmentCount Counter32, + coDot11MulticastReceivedFrameCount Counter32, + coDot11FCSErrorCount Counter32, + coDot11TransmittedFrameCount Counter32, + coDot11WEPUndecryptableCount Counter32 +} + +coDot11TransmittedFragmentCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented for an acknowledged MPDU + with an individual address in the address 1 field or an MPDU + with a multicast address in the address 1 field of type Data + or Management." + ::= { coDot11CountersEntry 1 } + +coDot11MulticastTransmittedFrameCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented only when the multicast bit is set + in the destination MAC address of a successfully transmitted + MSDU. When operating as a STA in an ESS, where these frames + are directed to the AP, this implies having received an + acknowledgment to all associated MPDUs." + ::= { coDot11CountersEntry 2 } + +coDot11FailedCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when an MSDU is not transmitted + successfully due to the number of transmit attempts exceeding + either the coDot11ShortRetryLimit or coDot11LongRetryLimit." + ::= { coDot11CountersEntry 3 } + +coDot11RetryCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when an MSDU is successfully + transmitted after one or more retransmissions." + ::= { coDot11CountersEntry 4 } + +coDot11MultipleRetryCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when an MSDU is successfully + transmitted after more than one retransmission." + ::= { coDot11CountersEntry 5 } + +coDot11FrameDuplicateCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when a frame is received + that the Sequence Control field indicates is a + duplicate." + ::= { coDot11CountersEntry 6 } + +coDot11RTSSuccessCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when a CTS is received in + response to an RTS." + ::= { coDot11CountersEntry 7 } + +coDot11RTSFailureCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when a CTS is not received in + response to an RTS." + ::= { coDot11CountersEntry 8 } + +coDot11ACKFailureCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when an ACK is not received + when expected." + ::= { coDot11CountersEntry 9 } + +coDot11ReceivedFragmentCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented for each successfully + received MPDU of type Data or Management." + ::= { coDot11CountersEntry 10 } + +coDot11MulticastReceivedFrameCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when a MSDU is received with the + multicast bit set in the destination MAC address." + ::= { coDot11CountersEntry 11 } + +coDot11FCSErrorCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when an FCS error is detected in a + received MPDU." + ::= { coDot11CountersEntry 12 } + +coDot11TransmittedFrameCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented for each successfully transmitted + MSDU." + ::= { coDot11CountersEntry 13 } + +coDot11WEPUndecryptableCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This counter is incremented when a frame is received with the + WEP subfield of the Frame Control field set to one and the + WEPOn value for the key mapped to the TA's MAC address + indicates that the frame should not have been encrypted or + that frame is discarded due to the receiving STA not + implementing the privacy option." + ::= { coDot11CountersEntry 14 } + +-- *** End of Counters Table ************************************************** + + +-- *** PHY Attribute Templates ************************************************ + +-- *** Phy Operation Table **************************************************** +coDot11PhyOperationTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11PhyOperationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "PHY level attributes concerned with operation. In tabular form + to allow multiple instances on an agent." + ::= { coDot11phy 1 } + +coDot11PhyOperationEntry OBJECT-TYPE + SYNTAX CoDot11PhyOperationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11PhyOperation Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex." + INDEX { ifIndex } + ::= { coDot11PhyOperationTable 1 } + +CoDot11PhyOperationEntry ::= SEQUENCE +{ + coDot11PHYType INTEGER, + coDot11CurrentRegDomain Integer32, + coDot11TempType INTEGER, + coDot11CurrentOperFrequency Unsigned32, + coDot11CurrentOperPHYType INTEGER, + coDot11Sensitivity INTEGER, + coDot11RadioEnabled TruthValue, + coDot11OperatingMode INTEGER, + coDot11AutoChannelEnabled TruthValue, + coDot11AutoChannelInterval INTEGER, + coDot11AutoPowerEnabled TruthValue, + coDot11AutoPowerInterval INTEGER +} + +coDot11PHYType OBJECT-TYPE + SYNTAX INTEGER + { + fhss(1), + dsss(2), + irbaseband(3), + ofdm(4), + ht(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This is an 8-bit integer value that identifies the PHY type + supported by the attached PLCP and PMD. Currently defined + values and their corresponding PHY types are: + FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, + OFDM 5 GHz = 04" + ::= { coDot11PhyOperationEntry 1 } + +coDot11CurrentRegDomain OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current regulatory domain this instance of the PMD is + supporting. This object corresponds to one of the RegDomains + listed in coDot11RegDomainsSupported." + ::= { coDot11PhyOperationEntry 2 } + +coDot11TempType OBJECT-TYPE + SYNTAX INTEGER + { + tempType1(1), + tempType2(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "There are different operating temperature requirements + dependent on the anticipated environmental conditions. This + attribute describes the current PHY's operating temperature + range capability. Currently defined values and their + corresponding temperature ranges are: + + Type 1 = X'01'-Commercial range of 0 to 40 degrees C, + + Type 2 = X'02'-Industrial range of -30 to 70 degrees C." + ::= { coDot11PhyOperationEntry 3 } + +coDot11CurrentOperFrequency OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current operating frequency channel of the radio." + ::= { coDot11PhyOperationEntry 4 } + +coDot11CurrentOperPHYType OBJECT-TYPE + SYNTAX INTEGER + { + ieee802dot11a(1), + ieee802dot11b(2), + ieee802dot11g(3), + ieee802dot11bAndg(4), + ieee802dot11aTurbo(5), + ieee802dot11n(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current operating phy type of the radio." + ::= { coDot11PhyOperationEntry 5 } + +coDot11Sensitivity OBJECT-TYPE + SYNTAX INTEGER + { + large(1), + medium(2), + small(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Receiver sensitivity of the radio." + ::= { coDot11PhyOperationEntry 6 } + +coDot11RadioEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "When True the radio is enabled." + ::= { coDot11PhyOperationEntry 7 } + +coDot11OperatingMode OBJECT-TYPE + SYNTAX INTEGER + { + accessPointAndWirelessLinks(1), + accessPointOnly(2), + wirelessLinksOnly(3), + monitor(4), + sensor(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Operating mode of the radio. Available options are: + + Access point and Wireless links: + Standard operating mode provides support for all wireless functions. + + Access point only: + Only provides access point functionality, wireless links cannot be created. + + Wireless links only: + Only provides wireless links functionality. Wireless client stations cannot connect. + + Monitor: + Enables the radio to be used for monitoring (wireless neighborhood) only. + Both access point and wireless links functionality are disabled. + + Sensor: + Enables the radio to be used for monitoring only." + ::= { coDot11PhyOperationEntry 8 } + +coDot11AutoChannelEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "When True the Auto Channel option is enabled." + ::= { coDot11PhyOperationEntry 9 } + +coDot11AutoChannelInterval OBJECT-TYPE + SYNTAX INTEGER + { + disable(0), + timeOfDay(1), + oneHour(60), + twoHours(120), + fourHours(240), + eightHours(480), + twelveHours(720), + tweentyFourHours(1440) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Time interval, in minutes, between auto rescanning of the channels. + Maximum is 1440 minutes (24 hours). A value of zero disables automatic + rescanning of channels, the radio will automatically select a channel + when the interface intializes and utilize that channel as long as the + interface is operational." + ::= { coDot11PhyOperationEntry 10 } + +coDot11AutoPowerEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "When True the Auto Power option is enabled." + ::= { coDot11PhyOperationEntry 11 } + +coDot11AutoPowerInterval OBJECT-TYPE + SYNTAX INTEGER + { + oneHour(60), + twoHours(120), + fourHours(240), + eightHours(480), + twelveHours(720), + tweentyFourHours(1440) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Time interval, in minutes, between auto rescanning of the channels. + Maximum is 1440 minutes (24 hours)." + ::= { coDot11PhyOperationEntry 12 } + + +-- *** End of Phy Operation Table ********************************************* + + +-- *** Phy Antenna Table ****************************************************** +coDot11PhyAntennaTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11PhyAntennaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Group of attributes for PhyAntenna. In tabular form to allow + multiple instances on an agent." + ::= { coDot11phy 2 } + +coDot11PhyAntennaEntry OBJECT-TYPE + SYNTAX CoDot11PhyAntennaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11PhyAntenna Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex." + INDEX { ifIndex } + ::= { coDot11PhyAntennaTable 1 } + +CoDot11PhyAntennaEntry ::= SEQUENCE +{ + coDot11CurrentTxAntenna Integer32, + coDot11DiversitySupport INTEGER, + coDot11CurrentRxAntenna Integer32 +} + +coDot11CurrentTxAntenna OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current antenna being used to transmit. This value is one + of the values appearing in coDot11SupportedTxAntenna. This may + be used by a management agent to control which antenna is used + for transmission." + ::= { coDot11PhyAntennaEntry 1 } + +coDot11DiversitySupport OBJECT-TYPE + SYNTAX INTEGER + { + fixedlist(1), + notsupported(2), + dynamic(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This implementation's support for diversity, encoded as: + + X'01': Diversity is available and is performed over the fixed + list of antennas defined in coDot11DiversitySelectionRx. + + X'02': Diversity is not supported. + + X'03': Diversity is supported and control of diversity is also + available, in which case the attribute + coDot11DiversitySelectionRx can be dynamically modified + by the LME." + ::= { coDot11PhyAntennaEntry 2 } + +coDot11CurrentRxAntenna OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current antenna being used to receive, if the coDot11 + DiversitySupport indicates that diversity is not supported. + The selected antenna shall be one of the antennae marked for + receive in the coDot11AntennasListTable." + ::= { coDot11PhyAntennaEntry 3 } + +-- *** End of Phy Antenna Table *********************************************** + + +-- *** Phy Config Table ******************************************************* +coDot11PhyConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11PhyConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "PHY configuration attributes. In tabular form to allow + multiple instances on an agent." + ::= { coDot11phy 3 } + +coDot11PhyConfigEntry OBJECT-TYPE + SYNTAX CoDot11PhyConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11PhyConfig Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex." + INDEX { ifIndex } + ::= { coDot11PhyConfigTable 1 } + +CoDot11PhyConfigEntry ::= SEQUENCE +{ + coDot11PhyAdminStatus INTEGER, + coDot11PhyOperStatus INTEGER +} + +coDot11PhyAdminStatus OBJECT-TYPE + SYNTAX INTEGER + { + up(1), -- ready to pass packets + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The desired state of the radio interface. + 'up': Sets the radio interface to be ready to pass packets. + 'down': Stops the transmit and receive of packets on + the interface." + ::= { coDot11PhyConfigEntry 1 } + +coDot11PhyOperStatus OBJECT-TYPE + SYNTAX INTEGER + { + up(1), -- ready to pass packets + down(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current state of the radio interface. + + 'up': The radio interface is ready to pass packets. + + 'down': The radio is not able to transmit nor receive + packets on the interface." + ::= { coDot11PhyConfigEntry 2 } + +-- *** End of Phy Config Table ************************************************ + + +-- *** Phy DSSS Table ********************************************************* +coDot11PhyDSSSTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11PhyDSSSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entry of attributes for coDot11PhyDSSSEntry. In tabular form + to allow multiple instances on an agent. This table only apply + when in DSSS 2.4 GHz range" + ::= { coDot11phy 4 } + +coDot11PhyDSSSEntry OBJECT-TYPE + SYNTAX CoDot11PhyDSSSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11PhyDSSSEntry Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex." + INDEX { ifIndex } + ::= { coDot11PhyDSSSTable 1 } + +CoDot11PhyDSSSEntry ::= SEQUENCE +{ + coDot11CurrentChannel Integer32, + coDot11CCAModeSupported Integer32, + coDot11CurrentCCAMode INTEGER +} + +coDot11CurrentChannel OBJECT-TYPE + SYNTAX Integer32 (1..14) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The desired operating frequency channel of the DSSS PHY. Valid + channel numbers are as defined in 15.4.6.2." + ::= { coDot11PhyDSSSEntry 1 } + +coDot11CCAModeSupported OBJECT-TYPE + SYNTAX Integer32 (1..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "coDot11CCAModeSupported is a bit-significant value, + representing all of the CCA modes supported by the PHY. + Valid values are: + + energy detect only (ED_ONLY) = 01, + + carrier sense only (CS_ONLY) = 02, + + carrier sense and energy detect (ED_and_CS)= 04 + + or the logical sum of any of these values." + ::= { coDot11PhyDSSSEntry 2 } + +coDot11CurrentCCAMode OBJECT-TYPE + SYNTAX INTEGER + { + edonly(1), + csonly(2), + edandcs(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current CCA method in operation. + Valid values are: + energy detect only (edonly) = 01, + + carrier sense only (csonly) = 02, + + carrier sense and energy detect (edandcs)= 04." + ::= { coDot11PhyDSSSEntry 3 } + +-- *** End of Phy DSSS Table ************************************************** + + +-- *** Regulation Domains Supported ******************************************* +coDot11RegDomainsSupportedTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11RegDomainsSupportedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "There are different operational requirements dependent on + the regulatory domain. This attribute list describes the + regulatory domains the PLCP and PMD support in this + implementation. Currently defined values and their + corresponding Regulatory Domains are: + FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of + Europe) = X'30', Spain = X'31', France = X'32', + Japan = X'41' " + ::= { coDot11phy 5 } + +coDot11RegDomainsSupportedEntry OBJECT-TYPE + SYNTAX CoDot11RegDomainsSupportedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11RegDomainsSupported Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coDot11RegDomainsSupportIndex - Uniquely specifies the + regulatory domain in the + table." + INDEX { ifIndex, coDot11RegDomainsSupportIndex } + ::= { coDot11RegDomainsSupportedTable 1 } + +CoDot11RegDomainsSupportedEntry ::= SEQUENCE +{ + coDot11RegDomainsSupportIndex Integer32, + coDot11RegDomainsSupportValue INTEGER +} + +coDot11RegDomainsSupportIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The auxiliary variable used to identify instances of the + columnar objects in the RegDomainsSupported Table." + ::= { coDot11RegDomainsSupportedEntry 1 } + +coDot11RegDomainsSupportValue OBJECT-TYPE + SYNTAX INTEGER + { + fcc(16), + doc(32), + etsi(48), + spain (49), + france(50), + japan (65) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "There are different operational requirements dependent on + the regulatory domain. This attribute list describes the + regulatory domains the PLCP and PMD support in this + implementation. Currently defined values and their + corresponding Regulatory Domains are: + FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of + Europe) = X'30', Spain = X'31', France = X'32', + Japan = X'41' " + ::= { coDot11RegDomainsSupportedEntry 2 } + +-- *** End of Regulation Domains Supported ************************************ + + +-- *** Antennas List Table **************************************************** +coDot11AntennasListTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11AntennasListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table represents the list of antennae. An antenna can be + marked to be capable of transmitting, receiving, and/or for + participation in receive diversity. Each entry in this table + represents a single antenna with its properties. The maximum + number of antennae that can be contained in this table is 255." + ::= { coDot11phy 6 } + +coDot11AntennasListEntry OBJECT-TYPE + SYNTAX CoDot11AntennasListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11AntennasListTable, representing the + properties of a single antenna. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coDot11AntennaListIndex - Uniquely identifies the antenna + connected to the 802.11 interface." + INDEX { ifIndex, coDot11AntennaListIndex } + ::= { coDot11AntennasListTable 1 } + +CoDot11AntennasListEntry ::= SEQUENCE +{ + coDot11AntennaListIndex Integer32, + coDot11SupportedTxAntenna TruthValue, + coDot11SupportedRxAntenna TruthValue, + coDot11DiversitySelectionRx TruthValue +} + +coDot11AntennaListIndex OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The unique index of an antenna which is used to identify the + columnar objects in the coDot11AntennasList Table." + ::= { coDot11AntennasListEntry 1 } + +coDot11SupportedTxAntenna OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "When true, this object indicates that the antenna represented + by coDot11AntennaIndex can be used as a transmit antenna." + ::= { coDot11AntennasListEntry 2 } + +coDot11SupportedRxAntenna OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "When true, this object indicates that the antenna represented + by the coDot11AntennaIndex can be used as a receive antenna." + ::= { coDot11AntennasListEntry 3 } + +coDot11DiversitySelectionRx OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "When true, this object indicates that the antenna represented + by coDot11AntennaIndex can be used for receive diversity. + This object may only be true if the antenna can be used + as a receive antenna, as indicated by + coDot11SupportedRxAntenna." + ::= { coDot11AntennasListEntry 4 } + +-- *** End of Antennas List Table ********************************************* + + +-- *** Supported Data Rates Tx ************************************************ +coDot11SupportedDataRatesTxTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11SupportedDataRatesTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The Transmit bit rates supported by the PLCP and PMD, data + rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s subject + to limitations of each individual PHY." + ::= { coDot11phy 7 } + +coDot11SupportedDataRatesTxEntry OBJECT-TYPE + SYNTAX CoDot11SupportedDataRatesTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An Entry (conceptual row) in the coDot11SupportedDataRatesTx + Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coDot11SupportedDataRatesTxIndex - Uniquely identifies a + supported rate in the + table." + INDEX { ifIndex, coDot11SupportedDataRatesTxIndex } + ::= { coDot11SupportedDataRatesTxTable 1 } + +CoDot11SupportedDataRatesTxEntry ::= SEQUENCE +{ + coDot11SupportedDataRatesTxIndex Integer32, + coDot11SupportedDataRatesTxValue Integer32 +} + +coDot11SupportedDataRatesTxIndex OBJECT-TYPE + SYNTAX Integer32 (1..12) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Index object which identifies which data rate to access." + ::= { coDot11SupportedDataRatesTxEntry 1 } + +coDot11SupportedDataRatesTxValue OBJECT-TYPE + SYNTAX Integer32 (2..127) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The Transmit bit rates supported by the PLCP and PMD, data + rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s + subject to limitations of each individual PHY." + ::= { coDot11SupportedDataRatesTxEntry 2 } + +-- *** End of Supported Data Rates Tx ***************************************** + + +-- *** Supported Data Rates Rx ************************************************ +coDot11SupportedDataRatesRxTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11SupportedDataRatesRxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The receive bit rates supported by the PLCP and PMD, data + rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s + subject to limitations of each individual PHY." + ::= { coDot11phy 8 } + +coDot11SupportedDataRatesRxEntry OBJECT-TYPE + SYNTAX CoDot11SupportedDataRatesRxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An Entry (conceptual row) in the coDot11SupportedDataRatesRx + Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex. + + coDot11SupportedDataRatesTxIndex - Uniquely identifies a + supported rate in the + table." + INDEX { ifIndex, coDot11SupportedDataRatesRxIndex } + ::= { coDot11SupportedDataRatesRxTable 1 } + +CoDot11SupportedDataRatesRxEntry ::= SEQUENCE +{ + coDot11SupportedDataRatesRxIndex Integer32, + coDot11SupportedDataRatesRxValue Integer32 +} + +coDot11SupportedDataRatesRxIndex OBJECT-TYPE + SYNTAX Integer32 (1..12) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Index object which identifies which data rate to access." + ::= { coDot11SupportedDataRatesRxEntry 1 } + +coDot11SupportedDataRatesRxValue OBJECT-TYPE + SYNTAX Integer32 (2..127) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The receive bit rates supported by the PLCP and PMD, data + rates are increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s + subject to limitations of each individual PHY." + ::= { coDot11SupportedDataRatesRxEntry 2 } + +-- *** End of Supported Data Rates Rx ***************************************** + + +-- *** Phy OFDM Table ********************************************************* +coDot11PhyOFDMTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11PhyOFDMEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entry of attributes for coDot11PhyOFDMEntry. In tabular form + to allow multiple instances on an agent. This table only apply + when in OFDM 5 GHz range." + ::= { coDot11phy 9 } + +coDot11PhyOFDMEntry OBJECT-TYPE + SYNTAX CoDot11PhyOFDMEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11PhyOFDMEntry Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex." + INDEX { ifIndex } + ::= { coDot11PhyOFDMTable 1 } + +CoDot11PhyOFDMEntry ::= SEQUENCE +{ + coDot11CurrentFrequency Integer32, + coDot11TIThreshold Integer32, + coDot11FrequencyBandsSupported Integer32 +} + +coDot11CurrentFrequency OBJECT-TYPE + SYNTAX Integer32 (1..200) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The desired operating frequency channel of the OFDM PHY." + ::= { coDot11PhyOFDMEntry 1 } + +coDot11TIThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The threshold being used to detect a busy medium (frequency). + CCA shall report a busy medium upon detecting the RSSI above + this threshold." + ::= { coDot11PhyOFDMEntry 2 } + +coDot11FrequencyBandsSupported OBJECT-TYPE + SYNTAX Integer32 (1..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The capability of the OFDM PHY implementation to operate in + the three U-NII bands. Coded as an integer value of a three bit + fields as follow: + + bit 0 .. capable of operating in the lower (5.15-5.25 GHz) + U-NII band. + + bit 1 .. capable of operating in the middle (5.25-5.35 GHz) + U-NII band. + + bit 2 .. capable of operating in the middle (5.725-5.825 GHz) + U-NII band. + + For example, for an implementation capable of operating in the + lower and middle bands, this attribute would take the value 3." + ::= { coDot11PhyOFDMEntry 3 } + +-- *** End of Phy OFDM Table ************************************************** + +-- *** PHY General Confifuration attributes *********************************** +coDot11MinimumSNRLevel OBJECT-TYPE + SYNTAX Integer32 (0..92) + UNITS "dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "An SNR level notification is generated when the average SNR + level is below this attribute. Not supported on the WCB-200." + ::= { coDot11phy 10 } + +coDot11SNRLevelNotificationEnabled OBJECT-TYPE + SYNTAX ColubrisNotificationEnable + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This attribute, when true, enables the generation of SNR level + notifications. Not supported on the WCB-200." + DEFVAL { enable } + ::= { coDot11phy 11 } + +coDot11SNRLevelNotificationInterval OBJECT-TYPE + SYNTAX Integer32 (1..1000000) + UNITS "minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Interval in minutes between SNR Level notifications. Not + supported on the WCB-200." + ::= { coDot11phy 12 } + +coDot11CountryCode OBJECT-TYPE + SYNTAX INTEGER + { + world(1), + albania(8), + algeria(12), + azerbaijan(31), + argentina(32), + australia(36), + austria(40), + bahrain(48), + armenia(51), + belgium(56), + bolivia(68), + brazil(76), + belize(84), + bruneiDarussalam(96), + bulgaria(100), + belarus(112), + canada(124), + chile(152), + china(156), + taiwan(158), + colombia(170), + costaRica(188), + croatia(191), + cyprus(196), + czechRepublic(203), + denmark(208), + dominicanRepublic(214), + ecuador(218), + elSalvador(222), + estonia(233), + finland(246), + france(250), + georgia(268), + germany(276), + greece(300), + guatemala(320), + honduras(340), + hongkong(344), + hungary(348), + iceland(352), + india(356), + indonesia(360), + iran(364), + ireland(372), + israel(376), + italy(380), + japanW52W53(392), + japanW52W53J52(393), + japanJ52(395), + japanJ5280211j(396), + japanClient(397), + kazakhstan(398), + jordan(400), + kenya(404), + northKorea(408), + southKorea(410), + kuwait(414), + lebanon(422), + latvia(428), + liechtenstein(438), + lithuania(440), + luxembourg(442), + macau(446), + malaysia(458), + mexico(484), + monaco(492), + morocco(504), + oman(512), + netherlands(528), + newZealand(554), + norway(578), + pakistan(586), + panama(591), + peru(604), + philippines(608), + poland(616), + portugal(620), + puertoRico(630), + qatar(634), + romania(642), + russianFederation(643), + saudiArabia(682), + singapore(702), + slovakia(703), + vietNam(704), + slovenia(705), + southAfrica(710), + zimbabwe(716), + spain(724), + sweden(752), + switzerland(756), + syria(760), + thailand(764), + trinidadAndTobago(780), + unitedArabEmirates(784), + tunisia(788), + turkey(792), + ukraine(804), + macedonia(807), + egypt(818), + unitedKingdom(826), + unitedKingdom58GHz(827), -- United Kingdom 5.8GHz licensed + unitedStates(840), + uruguay(858), + uzbekistan(860), + venezuela(862), + yemen(887) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The radios are running accordingly to the regulations + of this country." + ::= { coDot11phy 13 } + +-- *** Phy HT Table ********************************************************* +coDot11PhyHTTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11PhyHTEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entry of attributes for coDot11PhyHTEntry. This table only + apply when the PHY type is HT." + ::= { coDot11phy 14 } + +coDot11PhyHTEntry OBJECT-TYPE + SYNTAX CoDot11PhyHTEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11PhyHTEntry Table. + + ifIndex - Each 802.11 interface is represented by an ifEntry. + Interface tables in this MIB module are indexed by + ifIndex." + INDEX { ifIndex } + ::= { coDot11PhyHTTable 1 } + +CoDot11PhyHTEntry ::= SEQUENCE +{ + coDot11FortyMHzOperationImplemented TruthValue, + coDot11FortyMHzOperationEnabled TruthValue, + coDot11CurrentPrimaryChannel Integer32, + coDot11CurrentSecondaryChannel Integer32, + coDot11GreenfieldOptionImplemented TruthValue, + coDot11GreenfieldOptionEnabled TruthValue, + coDot11ShortGIOptionInTwentyImplemented TruthValue, + coDot11ShortGIOptionInTwentyEnabled TruthValue, + coDot11ShortGIOptionInFortyImplemented TruthValue, + coDot11ShortGIOptionInFortyEnabled TruthValue, + coDot11HighestSupportedDataRate Integer32 +} + +coDot11FortyMHzOperationImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute, when TRUE, indicates that the 40 MHz + Operation is implemented." + ::= { coDot11PhyHTEntry 1 } + +coDot11FortyMHzOperationEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute, when TRUE, indicates that the 40 MHz + Operation is enabled." + ::= { coDot11PhyHTEntry 2 } + +coDot11CurrentPrimaryChannel OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute indicates the operating channel. + If 20/40 MHz Mode is currently in use then this + attribute indicates the primary channel." + ::= { coDot11PhyHTEntry 3 } + +coDot11CurrentSecondaryChannel OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute indicates the channel number of the + secondary channel. If 20/40 MHz mode is not currently + in use, this attribute value shall be 0." + ::= { coDot11PhyHTEntry 4 } + +coDot11GreenfieldOptionImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute, when TRUE, indicates that the HT + Greenfield option is implemented." + ::= { coDot11PhyHTEntry 5 } + +coDot11GreenfieldOptionEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute, when TRUE, indicates that the HT + Greenfield option is enabled." + ::= { coDot11PhyHTEntry 6 } + +coDot11ShortGIOptionInTwentyImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute, when TRUE, indicates that the Short + Guard option is implemented for 20 MHz operation." + ::= { coDot11PhyHTEntry 7 } + +coDot11ShortGIOptionInTwentyEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute, when TRUE, indicates that the Short + Guard option is enabled for 20 MHz operation." + ::= { coDot11PhyHTEntry 8 } + +coDot11ShortGIOptionInFortyImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute, when TRUE, indicates that the Short + Guard option is implemented for 40 MHz operation." + ::= { coDot11PhyHTEntry 9 } + +coDot11ShortGIOptionInFortyEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute, when TRUE, indicates that the Short + Guard option is enabled for 40 MHz operation." + ::= { coDot11PhyHTEntry 10 } + +coDot11HighestSupportedDataRate OBJECT-TYPE + SYNTAX Integer32 (0..600) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This attribute shall specify the Highest Data Rate in + Mb/s at which the station may receive data." + ::= { coDot11PhyHTEntry 11 } + +-- *** End of Phy HT Table ************************************************** + +-- *** End of PHY General Configuration attributes **************************** + + +-- *** RSNA statistics ******************************************************** +coDot11RSNAStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CoDot11RSNAStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table maintains statistics for SN. It is not supported + on the WCB-200." + ::= { colubris802dot11 4 } + +coDot11RSNAStatsEntry OBJECT-TYPE + SYNTAX CoDot11RSNAStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the coDot11RSNAStatsTable." + AUGMENTS { coVirtualAccessPointConfigEntry } + ::= { coDot11RSNAStatsTable 1 } + +CoDot11RSNAStatsEntry ::= SEQUENCE +{ + coDot11RSNAStatsVersion Unsigned32, + coDot11RSNAStatsSelectedPairwiseCipher OCTET STRING, + coDot11RSNAStatsTKIPICVErrors Counter32, + coDot11RSNAStatsTKIPLocalMICFailures Counter32, + coDot11RSNAStatsTKIPRemoteMICFailures Counter32, + coDot11RSNAStatsTKIPCounterMeasuresInvoked Counter32, + coDot11RSNAStatsCCMPFormatErrors Counter32, + coDot11RSNAStatsCCMPReplays Counter32, + coDot11RSNAStatsCCMPDecryptErrors Counter32, + coDot11RSNAStatsTKIPReplays Counter32, + coDot11RSNAStats4WayHandshakeFailures Counter32 +} + +coDot11RSNAStatsVersion OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RSNA version which the AP associated with." + ::= { coDot11RSNAStatsEntry 2 } + +coDot11RSNAStatsSelectedPairwiseCipher OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(4)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The AKM Suite the AP selected during association. + The value consists of a three octet OUI followed by a + one octet type as follows: + + OUI Value, Cipher, Type + + XX-XX-XX, 0, Reserved + + XX-XX-XX, 1, WEP-40 + + XX-XX-XX, 2, TKIP + + XX-XX-XX, 3, Reserved + + XX-XX-XX, 4, CCMP + + XX-XX-XX, 5, WEP-104 + + XX-XX-XX, 6-255, Reserved + + Vendor, any, Vendor Specific + + other, any, Reserved" + ::= { coDot11RSNAStatsEntry 3 } + +coDot11RSNAStatsTKIPICVErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Counts the number of TKIP ICV errors encountered when + decrypting packets for the AP." + ::= { coDot11RSNAStatsEntry 4 } + +coDot11RSNAStatsTKIPLocalMICFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Counts the number of Michael MIC failure encountered when + checking the integrity of packets received from the AP at + this entity." + ::= { coDot11RSNAStatsEntry 5 } + +coDot11RSNAStatsTKIPRemoteMICFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Counts the number of Michael MIC failures encountered by + the remote device and reported back to this entity." + ::= { coDot11RSNAStatsEntry 6 } + +coDot11RSNAStatsTKIPCounterMeasuresInvoked OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Counts the number of times a MIC failure occurred two times + within 60 seconds and countermeasures were invoked. This + variable counts this for both local and remote. It + increments every time countermeasures are invoked." + ::= { coDot11RSNAStatsEntry 7 } + +coDot11RSNAStatsCCMPFormatErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of MSDUs received with an invalid CCMP format." + ::= { coDot11RSNAStatsEntry 8 } + +coDot11RSNAStatsCCMPReplays OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of received unicast fragments discarded by the + replay mechanism." + ::= { coDot11RSNAStatsEntry 9 } + +coDot11RSNAStatsCCMPDecryptErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of received fragments discarded by the CCMP + decryption algorithm." + ::= { coDot11RSNAStatsEntry 10 } + +coDot11RSNAStatsTKIPReplays OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Counts the number of TKIP replay errors detected." + ::= { coDot11RSNAStatsEntry 11 } + +coDot11RSNAStats4WayHandshakeFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Counts the number of 4-Way Handshake failures." + ::= { coDot11RSNAStatsEntry 12 } + +-- *** End of RSNA statistics ************************************************* + + +-- *** Notifications ********************************************************** +coDot11ManagementMIBNotificationPrefix OBJECT IDENTIFIER ::= { colubris802dot11 5 } +coDot11ManagementMIBNotifications OBJECT IDENTIFIER ::= { coDot11ManagementMIBNotificationPrefix 0 } + +coDot11SNRLevelNotification NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ifDescr, + coVirtualApSSID, + coDot11CurrentSNRLevel + } + STATUS current + DESCRIPTION "The average SNR level for all the stations using + this virtual ap during the last three intervals + is low." + --#SUMMARY "Low SNR of %d for wireless profile %s on interface %s" + --#ARGUMENTS { 3, 2, 1 } + --#SEVERITY WARNING + --#CATEGORY "Colubris Networks Alarms" + ::= { coDot11ManagementMIBNotifications 1 } + +coDot11AssociationNotification NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ifDescr, + coDot11StationName, + coDot11StationSSID, + coDot11StationIPAddress, + coDot11StationMACAddress, + coDot11SignalLevel, + coDot11SNR, + coDot11TransmitRate, + coDot11NumberOfUsers + } + STATUS current + DESCRIPTION "Sent when a new association is made or sent periodically + using interval specified by + coDot11AssociationNotificationInterval object." + --#SUMMARY "Device %s MAC:%s SNR:%d wirelessly associated on interface %s SSID %s." + --#ARGUMENTS { 2, 5, 7, 1, 3 } + --#SEVERITY INFORMATIONAL + --#CATEGORY "Colubris Networks Alarms" + ::= { coDot11ManagementMIBNotifications 2 } + +coDot11UnauthorizedAPNotification NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ifDescr, + coDot11ScanSSID, + coDot11ScanMacAddress, + coDot11ScanChannel, + coDot11ScanPHYType + } + STATUS current + DESCRIPTION "Sent when a new unauthorized AP is detected." + --#SUMMARY "Unauthorized Device %s MAC:%s detected on interface %s." + --#ARGUMENTS { 2, 3, 1 } + --#SEVERITY MAJOR + --#CATEGORY "Colubris Networks Alarms" + ::= { coDot11ManagementMIBNotifications 3 } + +-- *** End of Notifications *************************************************** + + +-- *** Conformance Information ************************************************ +coDot11Conformance OBJECT IDENTIFIER ::= { colubris802dot11 6 } +coDot11Groups OBJECT IDENTIFIER ::= { coDot11Conformance 1 } +coDot11Compliances OBJECT IDENTIFIER ::= { coDot11Conformance 2 } + +-- *** compliance statements ************************************************** +coDot11Compliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION "The compliance statement for SNMPv2 entities that implement + the IEEE 802.11 MIB." + MODULE MANDATORY-GROUPS + { + coDot11APBaseGroup, + coDot11MACBaseGroup, + coDot11CountersGroup, + coDot11SmtAuthenticationAlgorithmsGroup, + coDot11PhyConfigComplianceGroup, + coDot11PhyConfigGroup, + coDot11APPrivacyGroup, + coDot11MACStatisticsGroup, + coDot11PhyAntennaComplianceGroup, + coDot11PhyRegDomainsSupportGroup, + coDot11PhyAntennasListGroup, + coDot11PhyRateGroup, + coDot11AssociationGroup, + coDot11AssociationConfigGroup, + coDot11ScanGroup, + coDot11ScanConfigGroup, + coDot11WDSComplianceGroup, + coDot11NotificationGroup, + coDot11StationHTGroup + } + + GROUP coDot11PhyDSSSComplianceGroup + DESCRIPTION "Implementation of this group is required when object + coDot11PHYType has the value of dsss." + + GROUP coDot11PhyOFDMComplianceGroup + DESCRIPTION "Implementation of this group is required when object + coDot11PHYType has the value of ofdm." + + GROUP coDot11PhyHTComplianceGroup + DESCRIPTION "Implementation of this group is required when object + coDot11PHYType has the value of ht." + + ::= { coDot11Compliances 1 } + +coDot11RSNCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for SNMPv2 entities that implement + the IEEE 802.11 RSN MIB." + MODULE MANDATORY-GROUPS + { + coDot11RSNBase + } + ::= { coDot11Compliances 2 } + +coDot11ComplianceExt MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for SNMPv2 entities that implement + the IEEE 802.11 MIB." + MODULE MANDATORY-GROUPS + { + coDot11APBaseGroupExt, + coDot11MACBaseGroup, + coDot11CountersGroup, + coDot11SmtAuthenticationAlgorithmsGroup, + coDot11PhyConfigComplianceGroup, + coDot11PhyConfigGroup, + coDot11APPrivacyGroup, + coDot11MACStatisticsGroup, + coDot11PhyAntennaComplianceGroup, + coDot11PhyRegDomainsSupportGroup, + coDot11PhyAntennasListGroup, + coDot11PhyRateGroup, + coDot11AssociationGroup, + coDot11AssociationConfigGroup, + coDot11ScanGroup, + coDot11ScanConfigGroup, + coDot11WDSComplianceGroup, + coDot11NotificationGroup, + coDot11StationHTGroup + } + + GROUP coDot11PhyDSSSComplianceGroup + DESCRIPTION "Implementation of this group is required when object + coDot11PHYType has the value of dsss." + + GROUP coDot11PhyOFDMComplianceGroup + DESCRIPTION "Implementation of this group is required when object + coDot11PHYType has the value of ofdm." + + GROUP coDot11PhyHTComplianceGroup + DESCRIPTION "Implementation of this group is required when object + coDot11PHYType has the value of ht." + + ::= { coDot11Compliances 3 } + +-- *** Groups - units of conformance ****************************************** +coDot11APBaseGroup OBJECT-GROUP + OBJECTS { + coDot11RelayBetweenStation, + coDot11PrivacyOptionImplemented, + coDot11RSNAOptionImplemented, + coDot11BeaconPeriod, + coDot11DTIMPeriod, + coDot11NumberOfUsers, + coDot11AddToAssociationNotification, + coDot11PhyTxPowerAdminLevel, + coDot11PhyTxPowerOperLevel, + coDot11BSSID, + coDot11AdminMinimumDataRate, + coDot11AdminMaximumDataRate, + coDot11HighThroughputOptionImplemented + } + STATUS deprecated + DESCRIPTION "The AP object class provides the necessary support at the + Access Point to manage the processes in the STA such that + the STA may work cooperatively as a part of an IEEE 802.11 + network. coDot11AdminMinimumDataRate and + coDot11AdminMaximumDataRate are deprecated." + ::= { coDot11Groups 1 } + +coDot11APPrivacyGroup OBJECT-GROUP + OBJECTS { + coDot11PrivacyInvoked, + coDot11ExcludeUnencrypted, + coDot11WEPICVErrorCount, + coDot11WEPExcludedCount, + coDot11WEPDefaultKeyID, + coDot11WEPDefaultKey1Value, + coDot11WEPDefaultKey2Value, + coDot11WEPDefaultKey3Value, + coDot11WEPDefaultKey4Value, + coDot11RSNAEnabled + } + STATUS current + DESCRIPTION "The APPrivacy package is a set of attributes that shall be + present if WEP is implemented in the Access Point." + ::= { coDot11Groups 2 } + +coDot11MACBaseGroup OBJECT-GROUP + OBJECTS { + coDot11MACAddress, + coDot11RTSThreshold, + coDot11ShortRetryLimit, + coDot11LongRetryLimit, + coDot11FragmentationThreshold, + coDot11MaxTransmitMSDULifetime, + coDot11MaxReceiveLifetime, + coDot11ManufacturerID, + coDot11ProductID, + coDot11RadioType + } + STATUS current + DESCRIPTION "The MAC object class provides the necessary support for the + access control, generation, and verification of frame check + sequences, and proper delivery of valid data to upper layers." + ::= { coDot11Groups 3 } + +coDot11MACStatisticsGroup OBJECT-GROUP + OBJECTS { + coDot11RetryCount, + coDot11MultipleRetryCount + } + STATUS current + DESCRIPTION "The MACStatistics package provides extended statistical + information on the operation of the MAC. This package is + completely optional." + ::= { coDot11Groups 4 } + +coDot11SmtAuthenticationAlgorithmsGroup OBJECT-GROUP + OBJECTS { + coDot11AuthenticationAlgorithm, + coDot11AuthenticationAlgorithmsEnable + } + STATUS current + DESCRIPTION "Authentication Algorithm Table." + ::= { coDot11Groups 5 } + +coDot11PhyConfigComplianceGroup OBJECT-GROUP + OBJECTS { + coDot11MinimumSNRLevel, + coDot11CurrentSNRLevel, + coDot11Sensitivity, + coDot11PhyAdminStatus, + coDot11PhyOperStatus, + coDot11PHYType, + coDot11CurrentRegDomain, + coDot11TempType, + coDot11CurrentOperFrequency, + coDot11CurrentOperPHYType, + coDot11RadioEnabled, + coDot11OperatingMode, + coDot11AutoChannelEnabled, + coDot11AutoChannelInterval, + coDot11AutoPowerEnabled, + coDot11AutoPowerInterval + } + STATUS current + DESCRIPTION "PHY layer operations attributes." + ::= { coDot11Groups 6 } + +coDot11PhyConfigGroup OBJECT-GROUP + OBJECTS { + coDot11SNRLevelNotificationEnabled, + coDot11SNRLevelNotificationInterval, + coDot11CountryCode + } + STATUS current + DESCRIPTION "PHY notification configuration attributes." + ::= { coDot11Groups 7 } + +coDot11PhyAntennaComplianceGroup OBJECT-GROUP + OBJECTS { + coDot11CurrentTxAntenna, + coDot11DiversitySupport, + coDot11CurrentRxAntenna + } + STATUS current + DESCRIPTION "Phy antenna attributes." + ::= { coDot11Groups 8 } + +coDot11PhyDSSSComplianceGroup OBJECT-GROUP + OBJECTS { + coDot11CurrentChannel, + coDot11CCAModeSupported, + coDot11CurrentCCAMode + } + STATUS current + DESCRIPTION "Attributes that configure the DSSS for IEEE 802.11." + ::= { coDot11Groups 9 } + +coDot11PhyRegDomainsSupportGroup OBJECT-GROUP + OBJECTS { + coDot11RegDomainsSupportValue + } + STATUS current + DESCRIPTION "Attributes that specify the supported Regulation Domains." + ::= { coDot11Groups 10 } + +coDot11PhyAntennasListGroup OBJECT-GROUP + OBJECTS { + coDot11SupportedTxAntenna, + coDot11SupportedRxAntenna, + coDot11DiversitySelectionRx + } + STATUS current + DESCRIPTION "Antennas list attributes." + ::= { coDot11Groups 11 } + +coDot11PhyRateGroup OBJECT-GROUP + OBJECTS { + coDot11SupportedDataRatesTxValue, + coDot11SupportedDataRatesRxValue + } + STATUS current + DESCRIPTION "Attributes for Data Rates for IEEE 802.11." + ::= { coDot11Groups 12 } + +coDot11CountersGroup OBJECT-GROUP + OBJECTS { + coDot11TransmittedFragmentCount, + coDot11MulticastTransmittedFrameCount, + coDot11FailedCount, + coDot11FrameDuplicateCount, + coDot11RTSSuccessCount, + coDot11RTSFailureCount, + coDot11ACKFailureCount, + coDot11ReceivedFragmentCount, + coDot11MulticastReceivedFrameCount, + coDot11FCSErrorCount, + coDot11WEPUndecryptableCount, + coDot11TransmittedFrameCount + } + STATUS current + DESCRIPTION "Attributes from the coDot11CountersGroup that are not described + in the coDot11MACStatistics group. These objects are + mandatory." + ::= { coDot11Groups 13 } + +coDot11AssociationGroup OBJECT-GROUP + OBJECTS { + coDot11StationMACAddress, + coDot11StationConnectTime, + coDot11SignalLevel, + coDot11NoiseLevel, + coDot11SNR, + coDot11PktsRate1, + coDot11PktsRate2, + coDot11PktsRate5dot5, + coDot11PktsRate6, + coDot11PktsRate9, + coDot11PktsRate11, + coDot11PktsRate12, + coDot11PktsRate18, + coDot11PktsRate24, + coDot11PktsRate36, + coDot11PktsRate48, + coDot11PktsRate54, + coDot11TransmitRate, + coDot11ReceiveRate, + coDot11InPkts, + coDot11OutPkts, + coDot11InOctets, + coDot11OutOctets, + coDot11StationSSID, + coDot11StationName, + coDot11StationIPAddress, + coDot11StationVLAN, + coDot11StationLocalInterface, + coDot11StaHT + } + STATUS current + DESCRIPTION "The AP object class provides the necessary support at the + Access Point to manage the association table." + ::= { coDot11Groups 14 } + +coDot11AssociationConfigGroup OBJECT-GROUP + OBJECTS { + coDot11AssociationNotificationEnabled, + coDot11AssociationNotificationInterval + } + STATUS current + DESCRIPTION "The AP object class provides the necessary support at the + Access Point to manage the association table. Not supported + on the WCB-200." + ::= { coDot11Groups 15 } + +coDot11ScanGroup OBJECT-GROUP + OBJECTS { + coDot11ScanMacAddress, + coDot11ScanChannel, + coDot11ScanSSID, + coDot11ScanSignalLevel, + coDot11ScanNoiseLevel, + coDot11ScanSNR, + coDot11ScanStatus, + coDot11ScanPHYType, + coDot11ScanInactivityTime + } + STATUS current + DESCRIPTION "The AP object class provides the necessary support at the + Access Point to manage the scan table. " + ::= { coDot11Groups 16 } + +coDot11ScanConfigGroup OBJECT-GROUP + OBJECTS { + coDot11ScanEnabled, + coDot11ScanPeriodicity, + coDot11ScanAuthorizedListURL, + coDot11UnauthorizedAPNotificationEnabled, + coDot11UnauthorizedAPNotificationInterval + } + STATUS current + DESCRIPTION "The AP object class provides the necessary support at the + Access Point to manage the scan table. Not supported on + the WCB-200." + ::= { coDot11Groups 17 } + +coDot11WDSComplianceGroup OBJECT-GROUP + OBJECTS { + coDot11WDSPortMacAddress, + coDot11WDSPortCurrentRate, + coDot11WDSPortSNRLevel, + coDot11WDSPortTxPackets, + coDot11WDSPortTxDropped, + coDot11WDSPortTxErrors, + coDot11WDSPortRxPackets, + coDot11WDSPortRxDropped, + coDot11WDSPortRxErrors + } + STATUS current + DESCRIPTION "Attributes that configure the WDS table." + ::= { coDot11Groups 18 } + +coDot11NotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { + coDot11SNRLevelNotification, + coDot11AssociationNotification, + coDot11UnauthorizedAPNotification + } + STATUS current + DESCRIPTION "A collection of supported notifications." + ::= { coDot11Groups 19 } + +coDot11RSNBase OBJECT-GROUP + OBJECTS { + coDot11RSNAStatsVersion, + coDot11RSNAStatsSelectedPairwiseCipher, + coDot11RSNAStatsTKIPICVErrors, + coDot11RSNAStatsTKIPLocalMICFailures, + coDot11RSNAStatsTKIPRemoteMICFailures, + coDot11RSNAStatsTKIPCounterMeasuresInvoked, + coDot11RSNAStatsCCMPFormatErrors, + coDot11RSNAStatsCCMPReplays, + coDot11RSNAStatsCCMPDecryptErrors, + coDot11RSNAStatsTKIPReplays, + coDot11RSNAStats4WayHandshakeFailures + } + STATUS current + DESCRIPTION "The coDot11RSNBase object class provides the necessary + support for managing RSNA functionality in the STA" + ::= { coDot11Groups 20 } + +coDot11PhyOFDMComplianceGroup OBJECT-GROUP + OBJECTS { + coDot11CurrentFrequency, + coDot11TIThreshold, + coDot11FrequencyBandsSupported + } + STATUS current + DESCRIPTION "Attributes that configure the OFDM for IEEE 802.11." + ::= { coDot11Groups 21 } + +coDot11StationHTGroup OBJECT-GROUP + OBJECTS { + coDot11StaTransmitMCS, + coDot11StaReceiveMCS, + coDot11StaChannelWidth, + coDot11StaShortGI, + coDot11StaPktsTxMCS0, + coDot11StaPktsTxMCS1, + coDot11StaPktsTxMCS2, + coDot11StaPktsTxMCS3, + coDot11StaPktsTxMCS4, + coDot11StaPktsTxMCS5, + coDot11StaPktsTxMCS6, + coDot11StaPktsTxMCS7, + coDot11StaPktsTxMCS8, + coDot11StaPktsTxMCS9, + coDot11StaPktsTxMCS10, + coDot11StaPktsTxMCS11, + coDot11StaPktsTxMCS12, + coDot11StaPktsTxMCS13, + coDot11StaPktsTxMCS14, + coDot11StaPktsTxMCS15, + coDot11StaPktsRxMCS0, + coDot11StaPktsRxMCS1, + coDot11StaPktsRxMCS2, + coDot11StaPktsRxMCS3, + coDot11StaPktsRxMCS4, + coDot11StaPktsRxMCS5, + coDot11StaPktsRxMCS6, + coDot11StaPktsRxMCS7, + coDot11StaPktsRxMCS8, + coDot11StaPktsRxMCS9, + coDot11StaPktsRxMCS10, + coDot11StaPktsRxMCS11, + coDot11StaPktsRxMCS12, + coDot11StaPktsRxMCS13, + coDot11StaPktsRxMCS14, + coDot11StaPktsRxMCS15 + } + STATUS current + DESCRIPTION "The AP object class provides the necessary support at the + Access Point to manage the station HT table." + ::= { coDot11Groups 22 } + +coDot11PhyHTComplianceGroup OBJECT-GROUP + OBJECTS { + coDot11FortyMHzOperationImplemented, + coDot11FortyMHzOperationEnabled, + coDot11CurrentPrimaryChannel, + coDot11CurrentSecondaryChannel, + coDot11GreenfieldOptionImplemented, + coDot11GreenfieldOptionEnabled, + coDot11ShortGIOptionInTwentyImplemented, + coDot11ShortGIOptionInTwentyEnabled, + coDot11ShortGIOptionInFortyImplemented, + coDot11ShortGIOptionInFortyEnabled, + coDot11HighestSupportedDataRate + } + STATUS current + DESCRIPTION "Attributes that configure the HT for IEEE 802.11." + ::= { coDot11Groups 23 } + +coDot11APBaseGroupExt OBJECT-GROUP + OBJECTS { + coDot11RelayBetweenStation, + coDot11PrivacyOptionImplemented, + coDot11RSNAOptionImplemented, + coDot11BeaconPeriod, + coDot11DTIMPeriod, + coDot11NumberOfUsers, + coDot11AddToAssociationNotification, + coDot11PhyTxPowerAdminLevel, + coDot11PhyTxPowerOperLevel, + coDot11BSSID, + coDot11HighThroughputOptionImplemented + } + STATUS current + DESCRIPTION "The AP object class provides the necessary support at the + Access Point to manage the processes in the STA such that + the STA may work cooperatively as a part of an IEEE 802.11 + network." + ::= { coDot11Groups 24 } + +END |