summaryrefslogtreecommitdiff
path: root/MIBS/huawei/HUAWEI-DC-TRAP-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/huawei/HUAWEI-DC-TRAP-MIB')
-rw-r--r--MIBS/huawei/HUAWEI-DC-TRAP-MIB1035
1 files changed, 1035 insertions, 0 deletions
diff --git a/MIBS/huawei/HUAWEI-DC-TRAP-MIB b/MIBS/huawei/HUAWEI-DC-TRAP-MIB
new file mode 100644
index 0000000..c574e6d
--- /dev/null
+++ b/MIBS/huawei/HUAWEI-DC-TRAP-MIB
@@ -0,0 +1,1035 @@
+-- =================================================================
+-- Copyright (C) 2004 by HUAWEI TECHNOLOGIES. All rights reserved
+--
+-- Description: The HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS
+--
+-- Reference:
+-- Version: V1.0
+-- History:
+--
+-- =================================================================
+
+ HUAWEI-DC-TRAP-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ entPhysicalName
+ FROM ENTITY-MIB
+ hwDatacomm
+ FROM HUAWEI-MIB
+ ifIndex, ifDescr
+ FROM RFC1213-MIB
+ DisplayString
+ FROM SNMPv2-TC
+ OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI;
+
+
+ hwDCTrapMIB MODULE-IDENTITY
+ LAST-UPDATED "200604240000Z" -- April 24, 2006 at 00:00 GMT
+ ORGANIZATION
+ "Huawei Technologies co.,Ltd."
+ CONTACT-INFO
+ " R&D BeiJing, Huawei Technologies co.,Ltd.
+ Huawei Bld.,NO.3 Xinxi Rd.,
+ Shang-Di Information Industry Base,
+ Hai-Dian District Beijing P.R. China
+ Zip:100085
+ Http://www.huawei.com
+ E-mail:support@huawei.com "
+ DESCRIPTION
+ "
+ The HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS.
+ "
+ ::= { hwDatacomm 37 }
+
+
+
+
+
+ hwDCTrapControl OBJECT IDENTIFIER ::= { hwDCTrapMIB 1 }
+
+ hwDCCtrlTrap OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A string serving as a bit map for the trap
+ events defined by the hwDatacomm traps. This
+ object is used to enable and disable specific
+ hwDatacomm traps where a 1 in the bit field
+ represents enabled. The right-most bit (least
+ significant) represents trap 0."
+ ::= { hwDCTrapControl 1 }
+
+ hwTunnelGroupID OBJECT-TYPE
+ SYNTAX INTEGER (0..2047)
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Tunnel id"
+ ::= { hwDCTrapControl 2 }
+
+ hwDCTrapReason OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ " For the BTB system to report Trap Reason."
+ ::= { hwDCTrapControl 3 }
+
+ hwDCTraps OBJECT IDENTIFIER ::= { hwDCTrapMIB 2 }
+
+-- Traps
+ hwMPUSynClkFaulty NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "MPU sync clock signal faulty!"
+ ::= { hwDCTraps 1 }
+
+ hwMPUSynClkFaultyResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "MPU sync clock signal faulty resume!"
+ ::= { hwDCTraps 2 }
+
+ hwSlaveMPUNoResp NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Slave MPU has no response!"
+ ::= { hwDCTraps 3 }
+
+ hwSlaveMPUNoRespResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Slave MPU has no response resume!"
+ ::= { hwDCTraps 4 }
+
+ hwBrdChannelFaulty NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board channel faulty!"
+ ::= { hwDCTraps 5 }
+
+ hwBrdChannelFaultyResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board channel faulty resume!"
+ ::= { hwDCTraps 6 }
+
+ hwBrdNofullin NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board not full in!"
+ ::= { hwDCTraps 7 }
+
+ hwBrdNofullinResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board not full in resume!"
+ ::= { hwDCTraps 8 }
+
+ hwBrdTypeNoMatchReset NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board is reset because of the chip type is not matching!"
+ ::= { hwDCTraps 9 }
+
+ hwBrdAutoSwtFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board automatically switch syn-clock but it locked failed!"
+ ::= { hwDCTraps 10 }
+
+ hwBrdAutoSwt NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board automatically switch syn-clock!"
+ ::= { hwDCTraps 11 }
+
+ hwBrdClkLockERR NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board fabric clock is unlocked!"
+ ::= { hwDCTraps 12 }
+
+ hwBrdClkLockERRResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board fabric clock unlock to current clock resume!"
+ ::= { hwDCTraps 13 }
+
+ hwBrdRemoved NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board pulled out!"
+ ::= { hwDCTraps 14 }
+
+ hwBrdInserted NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board plugged in!"
+ ::= { hwDCTraps 15 }
+
+ hwBrdUp NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board register!"
+ ::= { hwDCTraps 16 }
+
+ hwClkSrcMiss NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "CLK source Loss Of Signal!"
+ ::= { hwDCTraps 17 }
+
+ hwClkAllSrcLost NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "CLK all source lost!"
+ ::= { hwDCTraps 18 }
+
+ hwClkAllSrcLostResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "CLK all source lost resume!"
+ ::= { hwDCTraps 19 }
+
+ hwClkFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "CLK hardware failed!"
+ ::= { hwDCTraps 20 }
+
+ hwClkFailResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "CLK hardware failed resume!"
+ ::= { hwDCTraps 21 }
+
+ hwClkNoHeartbeat NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "CLK No Heartbeat!"
+ ::= { hwDCTraps 22 }
+
+ hwClkNoHeartbeatResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "CLK No Heartbeat resume!"
+ ::= { hwDCTraps 23 }
+
+ hwLPULostSynAlarm NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LPU SERDES interface is lost synchronization!"
+ ::= { hwDCTraps 24 }
+
+ hwLPUOpenChannelError NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LPU SERDES interface open error!"
+ ::= { hwDCTraps 25 }
+
+ hwLPUSlfTstErr NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LPU self test error!"
+ ::= { hwDCTraps 26 }
+
+ hwLPU3ClkSwitch NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LPU 3 class clock is switch!"
+ ::= { hwDCTraps 27 }
+
+ hwSFULostHrtReset NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "SFU is reset because of heart beat loss!"
+ ::= { hwDCTraps 28 }
+
+ hwSFULinkLostReset NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "SFU is reset because of SERDES interface input channel link lost numbers over threshold!"
+ ::= { hwDCTraps 29 }
+
+ hwSFUChannelLinkLost NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "SFU check SERDES interface input channel link lost!"
+ ::= { hwDCTraps 30 }
+
+ hwSFUInChannelOpenFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "SFU SERDES interface input channel is opened failed!"
+ ::= { hwDCTraps 31 }
+
+ hwVoltSensorFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage monitor failure!"
+ ::= { hwDCTraps 32 }
+
+ hwVoltSensorFailResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage monitor failure resume!"
+ ::= { hwDCTraps 33 }
+
+ hwVoltBtmC NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage below fatal threshold!"
+ ::= { hwDCTraps 34 }
+
+ hwVoltBtmCResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage below fatal threshold resume!"
+ ::= { hwDCTraps 35 }
+
+ hwVoltSprC NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage over fatal threshold!"
+ ::= { hwDCTraps 36 }
+
+ hwVoltSprCResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage over fatal threshold resume!"
+ ::= { hwDCTraps 37 }
+
+ hwVoltBtmM NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage below major threshold!"
+ ::= { hwDCTraps 38 }
+
+ hwVoltBtmMResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage below major threshold resume!"
+ ::= { hwDCTraps 39 }
+
+ hwVoltSprM NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage over major threshold!"
+ ::= { hwDCTraps 40 }
+
+ hwVoltSprMResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board voltage over major threshold resume!"
+ ::= { hwDCTraps 41 }
+
+ hwTempSensorFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board temprature monitor failure!"
+ ::= { hwDCTraps 42 }
+
+ hwTempSensorFailResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board temperature monitor failure resume!"
+ ::= { hwDCTraps 43 }
+
+ hwTempMnr NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board temperature over minor threshold!"
+ ::= { hwDCTraps 44 }
+
+ hwTempMnrResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board temperature over minor threshold resume!"
+ ::= { hwDCTraps 45 }
+
+ hwTempMjr NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board temperature over major threshold!"
+ ::= { hwDCTraps 46 }
+
+ hwTempMjrResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board temperature over major threshold resume!"
+ ::= { hwDCTraps 47 }
+
+ hwTempCtl NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board temperature over fatal threshold!"
+ ::= { hwDCTraps 48 }
+
+ hwTempCtlResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board temperature over fatal threshold resume!"
+ ::= { hwDCTraps 49 }
+
+ hwFanHFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Fan hardware failure!"
+ ::= { hwDCTraps 50 }
+
+ hwFanFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Fan failure!"
+ ::= { hwDCTraps 51 }
+
+ hwFanFailResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Fan failure resume!"
+ ::= { hwDCTraps 52 }
+
+ hwFanAbsent NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Fan absent!"
+ ::= { hwDCTraps 53 }
+
+ hwFanAbsentResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Fan absent resume!"
+ ::= { hwDCTraps 54 }
+
+ hwFanCabUN NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Fan cable unplugged!"
+ ::= { hwDCTraps 55 }
+
+ hwFanCabUNResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Fan cable unplugged resume!"
+ ::= { hwDCTraps 56 }
+
+ hwPwrFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Power failure!"
+ ::= { hwDCTraps 57 }
+
+ hwPwrFailResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Power failure resume!"
+ ::= { hwDCTraps 58 }
+
+ hwPwrAbsent NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Power absent!"
+ ::= { hwDCTraps 59 }
+
+ hwPwrAbsentResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Power absent resume!"
+ ::= { hwDCTraps 60 }
+
+ hwPwrCabUN NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Power monitor cable unplugged!"
+ ::= { hwDCTraps 61 }
+
+ hwPwrCabUNResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Power monitor cable unplugged resume!"
+ ::= { hwDCTraps 62 }
+
+ hwLCDHFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LCD hardware failure!"
+ ::= { hwDCTraps 63 }
+
+ hwLCDFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LCD failure!"
+ ::= { hwDCTraps 64 }
+
+ hwLCDAbsent NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LCD absent!"
+ ::= { hwDCTraps 65 }
+
+ hwLCDAbsentResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LCD absent resume!"
+ ::= { hwDCTraps 66 }
+
+ hwLCDCabUN NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LCD cable unplugged!"
+ ::= { hwDCTraps 67 }
+
+ hwLCDCabUNResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "LCD cable unplugged resume!"
+ ::= { hwDCTraps 68 }
+
+ hwROMFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "EEPROM failure!"
+ ::= { hwDCTraps 69 }
+
+ hwMonitorBUSFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "MonitorBUS failure!"
+ ::= { hwDCTraps 70 }
+
+ hwMonitorBUSFailResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "MonitorBUS failure resume!"
+ ::= { hwDCTraps 71 }
+
+ hwBoardOfflineChange NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board power status change!"
+ ::= { hwDCTraps 72 }
+
+ hwWriteFlashError NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "write flash error!"
+ ::= { hwDCTraps 100 }
+
+ hwBoardReset NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "board reset!"
+ ::= { hwDCTraps 101 }
+
+ hwBoardResetSuccess NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "board reset success!"
+ ::= { hwDCTraps 102 }
+
+ hwSlaveMPUReset NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "slave MPU reset !"
+ ::= { hwDCTraps 103 }
+
+ hwMasterSlaveSwap NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "master slave swap!"
+ ::= { hwDCTraps 104 }
+
+ hwRTCFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "RTC failure!"
+ ::= { hwDCTraps 105 }
+
+ hwExchangeChipFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "5695 exchange chip fail!"
+ ::= { hwDCTraps 106 }
+
+ hwTempResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board temprature over threshold resume!"
+ ::= { hwDCTraps 107 }
+
+ hwOpticalModuleInsert NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "optical module plug in !"
+ ::= { hwDCTraps 108 }
+
+ hwOpticalModuleRemove NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "optical module plug out !"
+ ::= { hwDCTraps 109 }
+
+ hwFPGAAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "FPGA abnormal !"
+ ::= { hwDCTraps 110 }
+
+ hwMinMTunnelDownAlarm NOTIFICATION-TYPE
+ OBJECTS { hwTunnelGroupID }
+ STATUS current
+ DESCRIPTION
+ "
+ For Mac in Mac tunnel. Mac tunnel have two status: up or down, when physical interface is down or some cc package
+ can't arrive to the other side of mac in mac tunnel, the status of tunnel will be down
+ 1 Notice/Trap name: Tunnel down
+ 2 Notice/Trap generation cause: when All mac tunnel have been down in the mac tunnel group
+ 3 Repair suggestions:
+ make one of the mac tunnel up in the mac tunnel group
+ "
+ ::= { hwDCTraps 111 }
+
+ hwMinMTunnelUpAlarm NOTIFICATION-TYPE
+ OBJECTS { hwTunnelGroupID }
+ STATUS current
+ DESCRIPTION
+ "
+ For Mac in Mac tunnel. Mac tunnel have two status: up or down, if cc package can arrive to the other side of mac
+ in mac tunnel, the status of tunnel will be up
+ 1 Notice/Trap name: Tunnel up
+ 2 Notice/Trap generation cause: one of the tunnel is up in the mac tunnel group
+ 3 Repair suggestion:
+ "
+ ::= { hwDCTraps 112 }
+
+ hwInterfacePhysicalDown NOTIFICATION-TYPE
+ OBJECTS { ifIndex, ifDescr }
+ STATUS current
+ DESCRIPTION
+ "This trap is to indicate port link down on physical layer."
+ ::= { hwDCTraps 113 }
+
+ hwInterfacePhysicalUp NOTIFICATION-TYPE
+ OBJECTS { ifIndex, ifDescr }
+ STATUS current
+ DESCRIPTION
+ "This trap is to indicate port link up on physical layer."
+ ::= { hwDCTraps 114 }
+
+ hwBTBStartupFileNameDifferent NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "In the BTB system ,the start-up file name of master and slave chassis is different .
+ Used for BTB or its extend system."
+ ::= { hwDCTraps 119 }
+
+ hwBTBChassisRunningModeConflict NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The Master and Slave chassises running modes conflict.Used for BTB or its extend system."
+ ::= { hwDCTraps 120 }
+
+ hwBTBCtrlChannelFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The FE control channel failture, as physical link from up to down or channel blocked.
+ Used for BTB or its extend system."
+ ::= { hwDCTraps 121 }
+
+ hwBTBCtrlChannelFailResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The FE control channel failture resume.Used for BTB or its extend system."
+ ::= { hwDCTraps 122 }
+
+ hwBTBDataChannelFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The data channel failture, all optical links down between chassises.Used for BTB or its extend system."
+ ::= { hwDCTraps 123 }
+
+ hwBTBDataChannelFailResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The data channel failture resume.Used for BTB or its extend system."
+ ::= { hwDCTraps 124 }
+
+ hwBTBClkChannelFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The clock channel failture, clock link down between chassises.Used for BTB or its extend system."
+ ::= { hwDCTraps 125 }
+
+ hwBTBClkChannelFailResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The clock Channel failture resume.Used for BTB or its extend system."
+ ::= { hwDCTraps 126 }
+
+ hwBTBSFUOpticInterfaceError NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The optical fiber connection error, the connection of SFU fiber between chassises is not correct.
+ Used for BTB or its extend system."
+ ::= { hwDCTraps 127 }
+
+ hwBTBSFUOpticInterfaceErrorResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The optical fiber connection error resume.Used for BTB or its extend system."
+ ::= { hwDCTraps 128 }
+
+ hwBTBVSRInterfaceInvalid NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The SFU VSR(very short reach) interface invalid.Used for BTB or its extend system."
+ ::= { hwDCTraps 129 }
+
+ hwBTBVSRInterfaceInvalidResume NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The SFU VSR(very short reach) interface invalid resume.Used for BTB or its extend system."
+ ::= { hwDCTraps 130 }
+
+ hwBTBSlaveChassisNoHeart NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The slave chassis no heart.Used for BTB or its extend system."
+ ::= { hwDCTraps 131 }
+
+ hwBTBNoSlaveChassis NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "No slave chassis connected to the master chassis in the BTB system.Used for BTB or its extend system."
+ ::= { hwDCTraps 132 }
+
+ hwBTBSlaveChassisRegisted NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The slave chassis registe successful.Used for BTB or its extend system."
+ ::= { hwDCTraps 133 }
+
+ hwBTBSlaveChassisRegisteFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The slave chassis registe failed.Used for BTB or its extend system."
+ ::= { hwDCTraps 134 }
+
+ hwBTBChassisTypeConflict NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "The chassis information conflict in the PAF and Nvram.Used for BTB or its extend system."
+ ::= { hwDCTraps 135 }
+
+ hwSuperChangeSuccesful NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Super change successful."
+ ::= { hwDCTraps 136 }
+
+ hwSuperChangeFailure NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Super change Failure."
+ ::= { hwDCTraps 137 }
+
+ hwOpticaPowerAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Optical Transceiver power abnormal."
+ ::= { hwDCTraps 138 }
+
+ hwEpldAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Epld logic abnormal."
+ ::= { hwDCTraps 139 }
+
+ hwPhyChipAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "PHY chip is abnormal."
+ ::= { hwDCTraps 140 }
+
+ hwSerdesAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Serdes interface of PHY chip abnormal."
+ ::= { hwDCTraps 141 }
+
+ hwBoardAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Board is abnormal."
+ ::= { hwDCTraps 142 }
+
+ hwFeChannelAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "FE data channel is abnormal"
+ ::= { hwDCTraps 143 }
+
+ hwParityCheckAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Data parity check is abnormal"
+ ::= { hwDCTraps 144 }
+
+ hwPhyClockAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "The clock of PHY chip is abnormal."
+ ::= { hwDCTraps 145 }
+
+ hwPortAutoNegotiateFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "The ethernet port negotiate failed"
+ ::= { hwDCTraps 146 }
+
+ hwPortSemiduplex NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "The ethernet port work at semi duplex state."
+ ::= { hwDCTraps 147 }
+
+ hwScuStartModeSetFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "The start mode of SCU set failed"
+ ::= { hwDCTraps 148 }
+
+ hwMemoryExhaust NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "MPU memory exhaust."
+ ::= { hwDCTraps 149 }
+
+ hwMemoryExhaustClear NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "MPU memory usage resume to normal."
+ ::= { hwDCTraps 150 }
+
+ hwMethAbnormal NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "The Meth interface is abnormal."
+ ::= { hwDCTraps 151 }
+
+ hwLpuNotTight NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "The LPU board is not tightly installed. Install the board again."
+ ::= { hwDCTraps 152 }
+
+ hwLicenseFail NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "License fail."
+ ::= { hwDCTraps 153 }
+
+ hwHaBatchBegin NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "No command line can be entered because batch backup is processing."
+ ::= { hwDCTraps 154 }
+
+ hwHaBatchEnd NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Command lines can be entered because batch backup ends."
+ ::= { hwDCTraps 155 }
+
+ hwHaSmoothBegin NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "No command line can be entered because data smooth is processing."
+ ::= { hwDCTraps 156 }
+
+ hwHaSmoothEnd NOTIFICATION-TYPE
+ OBJECTS { entPhysicalName }
+ STATUS current
+ DESCRIPTION
+ "Command lines can be entered because data smooth ends."
+ ::= { hwDCTraps 157 }
+ hwDCTrapConformance OBJECT IDENTIFIER ::= { hwDCTrapMIB 3 }
+
+-- conformance information
+ hwDCTrapGroups OBJECT IDENTIFIER ::= { hwDCTrapConformance 1 }
+
+-- units of conformance
+ hwDCTrapControlGroup OBJECT-GROUP
+ OBJECTS { hwDCCtrlTrap, hwTunnelGroupID, hwDCTrapReason }
+ STATUS current
+ DESCRIPTION
+ "These objects are required to control traps
+ from hwDatacomm Traps systems."
+ ::= { hwDCTrapGroups 1 }
+
+ hwDCNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { hwMPUSynClkFaulty, hwMPUSynClkFaultyResume, hwSlaveMPUNoResp, hwSlaveMPUNoRespResume, hwBrdChannelFaulty,
+ hwBrdChannelFaultyResume, hwBrdNofullin, hwBrdNofullinResume, hwBrdTypeNoMatchReset, hwBrdAutoSwtFail,
+ hwBrdAutoSwt, hwBrdClkLockERR, hwBrdClkLockERRResume, hwBrdRemoved, hwBrdUp,
+ hwClkSrcMiss, hwClkAllSrcLost, hwClkAllSrcLostResume, hwClkFail, hwClkFailResume,
+ hwClkNoHeartbeat, hwClkNoHeartbeatResume, hwLPULostSynAlarm, hwLPUOpenChannelError, hwLPUSlfTstErr,
+ hwLPU3ClkSwitch, hwSFULostHrtReset, hwSFULinkLostReset, hwSFUChannelLinkLost, hwSFUInChannelOpenFail,
+ hwVoltSensorFail, hwVoltSensorFailResume, hwVoltBtmC, hwVoltBtmCResume, hwVoltSprC,
+ hwVoltSprCResume, hwVoltBtmM, hwVoltBtmMResume, hwVoltSprM, hwVoltSprMResume,
+ hwTempSensorFail, hwTempSensorFailResume, hwTempMnr, hwTempMnrResume, hwTempMjr,
+ hwTempMjrResume, hwTempCtl, hwTempCtlResume, hwFanHFail, hwFanFail,
+ hwFanFailResume, hwFanAbsent, hwFanAbsentResume, hwFanCabUN, hwFanCabUNResume,
+ hwPwrFail, hwPwrFailResume, hwPwrAbsent, hwPwrAbsentResume, hwPwrCabUN,
+ hwPwrCabUNResume, hwLCDHFail, hwLCDFail, hwLCDAbsent, hwLCDAbsentResume,
+ hwLCDCabUN, hwLCDCabUNResume, hwROMFail, hwMonitorBUSFail, hwMonitorBUSFailResume,
+ hwWriteFlashError, hwBoardReset, hwBoardResetSuccess, hwSlaveMPUReset, hwMasterSlaveSwap,
+ hwRTCFail, hwExchangeChipFail, hwTempResume, hwOpticalModuleInsert, hwOpticalModuleRemove,
+ hwBoardOfflineChange, hwInterfacePhysicalDown, hwInterfacePhysicalUp, hwBTBStartupFileNameDifferent, hwBTBChassisRunningModeConflict,
+ hwBTBCtrlChannelFail, hwBTBCtrlChannelFailResume, hwBTBDataChannelFail, hwBTBDataChannelFailResume, hwBTBClkChannelFail,
+ hwBTBClkChannelFailResume, hwBTBSFUOpticInterfaceError, hwBTBSFUOpticInterfaceErrorResume, hwBTBVSRInterfaceInvalid, hwBTBVSRInterfaceInvalidResume,
+ hwBTBSlaveChassisNoHeart, hwBTBNoSlaveChassis, hwBTBSlaveChassisRegisted, hwBTBSlaveChassisRegisteFail, hwBTBChassisTypeConflict,
+ hwOpticaPowerAbnormal, hwFPGAAbnormal, hwBrdInserted, hwMinMTunnelDownAlarm, hwMinMTunnelUpAlarm,
+ hwSuperChangeSuccesful, hwSuperChangeFailure, hwEpldAbnormal, hwPhyChipAbnormal, hwSerdesAbnormal,
+ hwBoardAbnormal, hwFeChannelAbnormal, hwParityCheckAbnormal, hwPhyClockAbnormal, hwPortAutoNegotiateFail, hwPortSemiduplex,
+ hwScuStartModeSetFail, hwMemoryExhaust, hwMemoryExhaustClear, hwMethAbnormal, hwLpuNotTight,hwLicenseFail,
+ hwHaBatchBegin,hwHaBatchEnd,hwHaSmoothBegin,hwHaSmoothEnd}
+ STATUS current
+ DESCRIPTION
+ "The notification group defined for Datacomm products."
+ ::= { hwDCTrapGroups 2 }
+
+ hwDCTrapCompliances OBJECT IDENTIFIER ::= { hwDCTrapConformance 2 }
+
+-- compliance statements
+ hwDCTrapCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement."
+ MODULE -- this module
+ MANDATORY-GROUPS { hwDCTrapControlGroup, hwDCNotificationGroup }
+ ::= { hwDCTrapCompliances 1 }
+
+
+ END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 15:07:39 +0000