diff options
Diffstat (limited to 'MIBS/huawei/HUAWEI-MPLSOAM-PS-MIB')
| -rw-r--r-- | MIBS/huawei/HUAWEI-MPLSOAM-PS-MIB | 542 |
1 files changed, 542 insertions, 0 deletions
diff --git a/MIBS/huawei/HUAWEI-MPLSOAM-PS-MIB b/MIBS/huawei/HUAWEI-MPLSOAM-PS-MIB new file mode 100644 index 0000000..0b21181 --- /dev/null +++ b/MIBS/huawei/HUAWEI-MPLSOAM-PS-MIB @@ -0,0 +1,542 @@ + HUAWEI-MPLSOAM-PS-MIB DEFINITIONS ::= BEGIN + + IMPORTS + hwMplsOam + FROM HUAWEI-MPLSOAM-MIB + InterfaceIndex + FROM IF-MIB + OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP + FROM SNMPv2-CONF + IpAddress, Integer32, Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE + FROM SNMPv2-SMI + RowStatus, TruthValue + FROM SNMPv2-TC; + + + +-- +-- Node definitions +-- + + hwMplsOamPs OBJECT IDENTIFIER ::= { hwMplsOam 1 } + + + hwMplsPsObjects OBJECT IDENTIFIER ::= { hwMplsOamPs 3 } + + + hwMplsPsTable OBJECT-TYPE + SYNTAX SEQUENCE OF HwMplsPsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table specifies per-protection-group MPLS PS + capability and associated information. + " + ::= { hwMplsPsObjects 1 } + + + hwMplsPsEntry OBJECT-TYPE + SYNTAX HwMplsPsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table is created by an LSR for every + protection group capable of supporting mpls ps." + INDEX { hwMplsPsIndex } + ::= { hwMplsPsTable 1 } + + + HwMplsPsEntry ::= + SEQUENCE { + hwMplsPsIndex + Unsigned32, + hwMplsPsType + Integer32, + hwMplsPsWorkTunnName + OCTET STRING, + hwMplsPsWorkTunnId + Integer32, + hwMplsPsProtectTunnName + OCTET STRING, + hwMplsPsProtectTunnId + Integer32, + hwMplsPsRevertiveMode + Integer32, + hwMplsPsWTR + Integer32, + hwMplsPsHoldOff + Integer32, + hwMplsPsSwitchCondition + Integer32, + hwMplsPsWorkTunnelState + Integer32, + hwMplsPsProtTunnelState + Integer32, + hwMplsPsSwitchResult + Integer32, + hwMplsPsCfgType + Integer32, + hwMplsPsCfgProtectTunnId + Integer32, + hwMplsPsCfgRevertiveMode + Integer32, + hwMplsPsCfgWTR + Integer32, + hwMplsPsCfgHoldOff + Integer32, + hwMplsPsRowStatus + RowStatus + } + + hwMplsPsIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is a unique index for an entry in the mplspsEntry. + + " + ::= { hwMplsPsEntry 1 } + + + hwMplsPsType OBJECT-TYPE + SYNTAX Integer32 (1..4) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of protection switch,can be 1:1,1+1,shared mesh, + packet 1+1,the default choice is 1:1. + In the 1+1 architecture type, a protection LSP is dedicated to + each working LSP with the working LSP bridged onto the + protection LSP at the source of the protection domain. + The traffic on working and protection LSPs is transmitted + simultaneously to the sink of the protection domain, + where a selection between the working and protection LSP is + made, based on some predetermined criteria, such as defect + indication. + In the 1:1 architecture type, a protection LSP is dedicated to + each working LSP. The working traffic is transmitted either by + working or protection LSP. + In the shared mesh architecture type, possible sharing of + protection capacity between disjoint link, node in the network + is achieved while guaranteeing recovery from a single failure. + In the packet 1+1 architecture type, the traffic is transmitted + simultaneously onto two possibly disjoint routed LSPs to the + sink of the protection domain. Each pair of duplicate + transmitted packets is assigned the same identifier (sequence + number) but distinct from the other pairs of duplicate packets. + At the sink of the protection domain packet level selection + mechanism is employed to select one of the two possibly + received copies of each packet. + 1: 1:1 protection switching,; + 2: 1+1 protection switching; + 3: shared mesh protection swiching; + 4: packet 1+1 protection switching. + " + ::= { hwMplsPsEntry 2 } + + + hwMplsPsWorkTunnName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The name of work-tunnel." + ::= { hwMplsPsEntry 3 } + + + hwMplsPsWorkTunnId OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Work-tunnel id(session-tunnel-id)." + ::= { hwMplsPsEntry 4 } + + + hwMplsPsProtectTunnName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of protect-tunnel." + ::= { hwMplsPsEntry 5 } + + + hwMplsPsProtectTunnId OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Protect-tunnel id(session-tunnel-id)." + ::= { hwMplsPsEntry 6 } + + + hwMplsPsRevertiveMode OBJECT-TYPE + SYNTAX Integer32 (1..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Revertive mode is a protection switching mode where revertive + action (switch back to the working LSP) is taken after the + working LSP is repaired.And switching does not occur in a + non-revertive mode. + 1: revertive; + 2: non-revertive; + " + ::= { hwMplsPsEntry 7 } + + + hwMplsPsWTR OBJECT-TYPE + SYNTAX Integer32 (0..60) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Wait to Restore timer is only applicable for the revertive mode + and applies to a working LSP,It prevents reversion back to + select the working LSP until the Wait to Restore timer has + expired.The default value is 12 minutes.step is 30s." + ::= { hwMplsPsEntry 8 } + + + hwMplsPsHoldOff OBJECT-TYPE + SYNTAX Integer32 (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time between declaration of signal degrade or signal fail, + and the initialization of the protection switching algorithm. + step is 100ms.maximum is 10s." + ::= { hwMplsPsEntry 9 } + + + hwMplsPsSwitchCondition OBJECT-TYPE + SYNTAX Integer32 (1..9) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current switch condition of the protection group. + 1: clear,This command clears all of the externally + initiated switch commands listed below; + 2: lockout of protection,Fix the selector position on the + working LSP,Prevents the selector from switching to the + protection LSP when it is selecting the working LSP. + Switches the selector from the protection to the working LSP + when it is selecting the protection LSP; + 3: forced protection,Switches the selector from the working LSP + to the protection LSP (unless a higher priority switch + request (i.e., LoP) is in effect); + 4: signal fail,for 1:1,Signal Fail (SF) is declared when the + source of the protection domain enters the Defect State by + receiving a BDI packet (from the return LSP or out of band). + 5: manual switch for working-lsp,Switches the selector from the + working LSP to the protection LSP (unless an equal or higher + priority switch request (i.e., LoP, FS, SF or MS) is in + effect); + 6: manual switch for protection-lsp,Switches the selector from + the protection LSP to the working LSP (unless an equal or + higher priority switch request (i.e., LoP, FS, SF or MS) is + in effect). + 7: WTR-timer; + 8: HoldOff-timer; + 9: Others; + The pripority of the commands are: + clear > lockout of protection > force switch > manual switch for working + lsp = manual switch for protection lsp" + ::= { hwMplsPsEntry 10 } + + + hwMplsPsWorkTunnelState OBJECT-TYPE + SYNTAX Integer32 (1..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of working tunnel state in one protection group, + whether it is in detection, + 1: it is outof defect + 2: it enters defect + " + ::= { hwMplsPsEntry 11 } + + + hwMplsPsProtTunnelState OBJECT-TYPE + SYNTAX Integer32 (1..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of protection tunnel state in one protection group, + whether it is in detection, + 1: it is outof defect + 2: it enters defect" + ::= { hwMplsPsEntry 12 } + + + hwMplsPsSwitchResult OBJECT-TYPE + SYNTAX Integer32 (1..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Which tunnel is used to transfer the data stream. + 1: working-tunnel + 2: protection-tunnel" + ::= { hwMplsPsEntry 13 } + + + hwMplsPsCfgType OBJECT-TYPE + SYNTAX Integer32 (1..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of protection switch which is configured. + 1: 1:1 + 2: 1+1 + 3: shared mesh + 4: packet 1:1" + ::= { hwMplsPsEntry 14 } + + + hwMplsPsCfgProtectTunnId OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Protect-tunnel id(session-tunnel-id)." + ::= { hwMplsPsEntry 15 } + + + hwMplsPsCfgRevertiveMode OBJECT-TYPE + SYNTAX Integer32 (1..2) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Revertive mode is a protection switching mode where revertive + action (switch back to the working LSP) is taken after the + working LSP is repaired.And switching does not occur in a + non-revertive mode. + 1: revertive; + 2: non-revertive; + + " + ::= { hwMplsPsEntry 16 } + + + hwMplsPsCfgWTR OBJECT-TYPE + SYNTAX Integer32 (0..60) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Wait to Restore timer is only applicable for the revertive mode + and applies to a working LSP,It prevents reversion back to + select the working LSP until the Wait to Restore timer has + expired.The default value is 12 minutes.step is 30s." + ::= { hwMplsPsEntry 17 } + + + hwMplsPsCfgHoldOff OBJECT-TYPE + SYNTAX Integer32 (0..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The time between declaration of signal degrade or signal fail, + and the initialization of the protection switching algorithm. + step is 100ms.maximum is 10s." + ::= { hwMplsPsEntry 18 } + + + hwMplsPsRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable is used to create, modify, and + delete a row in this table. + 1: active + 2: not in service + 3: not ready + 4: create and go + 5: create and wait + 6: destroy" + ::= { hwMplsPsEntry 19 } + + + hwTunnPsTrapOpen OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "1:enable; + 2:disable;" + ::= { hwMplsPsObjects 2 } + + + hwMplsVCPsTable OBJECT-TYPE + SYNTAX SEQUENCE OF HwMplsVCPsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Description." + ::= { hwMplsPsObjects 3 } + + + hwMplsVCPsEntry OBJECT-TYPE + SYNTAX HwMplsVCPsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "this table for these commands + 1.mpls te protection tunnel XXX + 2. mpls te reverse-lsp { lsp-name XXXX | lsr-id X.X.X.X tunnel-id x } + 3. mpls te reserved-for-binding " + INDEX { hwMplsVCPsIfIndex } + ::= { hwMplsVCPsTable 1 } + + + HwMplsVCPsEntry ::= + SEQUENCE { + hwMplsVCPsIfIndex + InterfaceIndex, + hwMplsVCPsTNLBinding + TruthValue, + hwMplsTeReverseLspName + OCTET STRING, + hwMplsVcPsRowStatus + RowStatus, + hwMplsTeReverseLspLsrId + IpAddress, + hwMplsTeReverseLspTunnId + Integer32 + } + + hwMplsVCPsIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description.the index of working tunnel interface of Protection group " + ::= { hwMplsVCPsEntry 1 } + + + hwMplsVCPsTNLBinding OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Description.it is used by command ' mpls te reserved-for-binding '" + ::= { hwMplsVCPsEntry 2 } + + + hwMplsTeReverseLspName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Description.it is used for command ' mpls te reverse-lsp lspname'" + ::= { hwMplsVCPsEntry 3 } + + + hwMplsVcPsRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Description. + 1: active; + 2: notInservice; + 3: notReady; + 4: CreateAndGo; + 5: CreateAndWait; + 6: destroy;" + ::= { hwMplsVCPsEntry 4 } + + + hwMplsTeReverseLspLsrId OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'" + ::= { hwMplsVCPsEntry 5 } + + + hwMplsTeReverseLspTunnId OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'" + ::= { hwMplsVCPsEntry 6 } + + + hwMplsPsNotifications OBJECT IDENTIFIER ::= { hwMplsOamPs 4 } + + + hwMplsPsSwitchPtoW NOTIFICATION-TYPE + OBJECTS { hwMplsPsWorkTunnName, hwMplsPsWorkTunnId, hwMplsPsProtectTunnName, hwMplsPsProtectTunnId, hwMplsPsSwitchResult + } + STATUS current + DESCRIPTION + "This notification is generated when switching from + protection-lsp to working-lsp occured." + ::= { hwMplsPsNotifications 1 } + + + hwMplsPsSwitchWtoP NOTIFICATION-TYPE + OBJECTS { hwMplsPsWorkTunnName, hwMplsPsWorkTunnId, hwMplsPsProtectTunnName, hwMplsPsProtectTunnId, hwMplsPsSwitchResult + } + STATUS current + DESCRIPTION + "This notification is generated when switching from woking-lsp + to protection-lsp occured. + " + ::= { hwMplsPsNotifications 2 } + + + hwMplsOamPsConformance OBJECT IDENTIFIER ::= { hwMplsOamPs 100 } + + + hwMplsOamPsCompliances OBJECT IDENTIFIER ::= { hwMplsOamPsConformance 1 } + + + hwMplsOamPsGroupCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for mpls oam ps." + MODULE -- this module + MANDATORY-GROUPS { hwMplsPsGroup, hwMplsVcPsGroup } + ::= { hwMplsOamPsCompliances 1 } + + + hwMplsOamPsGroups OBJECT IDENTIFIER ::= { hwMplsOamPsConformance 2 } + + + hwMplsPsGroup OBJECT-GROUP + OBJECTS { hwMplsPsType, hwMplsPsWorkTunnName, hwMplsPsWorkTunnId, hwMplsPsProtectTunnName, hwMplsPsProtectTunnId, + hwMplsPsRevertiveMode, hwMplsPsWTR, hwMplsPsHoldOff, hwMplsPsSwitchCondition, hwMplsPsWorkTunnelState, + hwMplsPsProtTunnelState, hwMplsPsSwitchResult, hwMplsPsCfgType, hwMplsPsCfgProtectTunnId, hwMplsPsCfgRevertiveMode, + hwMplsPsCfgWTR, hwMplsPsCfgHoldOff, hwMplsPsRowStatus, hwTunnPsTrapOpen, hwMplsVCPsIfIndex, + hwMplsPsIndex } + STATUS current + DESCRIPTION + "The compliance statement for mpls oam ps management." + ::= { hwMplsOamPsGroups 1 } + + + hwMplsVcPsGroup OBJECT-GROUP + OBJECTS { hwMplsVCPsTNLBinding, hwMplsTeReverseLspName, hwMplsVcPsRowStatus, hwMplsTeReverseLspLsrId, hwMplsTeReverseLspTunnId + } + STATUS current + DESCRIPTION + "The compliance statement for mpls oam ps reverse lsp." + ::= { hwMplsOamPsGroups 2 } + + + hwMplsPsNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { hwMplsPsSwitchPtoW, hwMplsPsSwitchWtoP } + STATUS current + DESCRIPTION + "Description." + ::= { hwMplsOamPsGroups 3 } + + + + END |