diff options
Diffstat (limited to 'MIBS/janitza/JANITZA-MIB')
| -rw-r--r-- | MIBS/janitza/JANITZA-MIB | 830 |
1 files changed, 830 insertions, 0 deletions
diff --git a/MIBS/janitza/JANITZA-MIB b/MIBS/janitza/JANITZA-MIB new file mode 100644 index 0000000..1ec3e88 --- /dev/null +++ b/MIBS/janitza/JANITZA-MIB @@ -0,0 +1,830 @@ +
+
+ JANITZA-MIB DEFINITIONS ::= BEGIN
+ IMPORTS
+ sysUpTime, DisplayString
+ FROM RFC1213-MIB
+ OBJECT-TYPE
+ FROM RFC-1212
+ mib-2
+ FROM SNMPv2-SMI
+ enterprises, TimeTicks
+ FROM RFC1155-SMI;
+
+
+
+
+system OBJECT IDENTIFIER ::= { mib-2 1 }
+snmp OBJECT IDENTIFIER ::= { mib-2 11 }
+
+sysDescr OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of the entity. This value should
+ include the full name and version identification of
+ the system's hardware type, software operating-system,
+ and networking software."
+ ::= { system 1 }
+
+sysObjectID OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vendor's authoritative identification of the
+ network management subsystem contained in the entity.
+ This value is allocated within the SMI enterprises
+ subtree (1.3.6.1.4.1) and provides an easy and
+ unambiguous means for determining `what kind of box' is
+ being managed. For example, if vendor `Flintstones,
+ Inc.' was assigned the subtree 1.3.6.1.4.1.424242,
+ it could assign the identifier 1.3.6.1.4.1.424242.1.1
+ to its `Fred Router'."
+ ::= { system 2 }
+
+sysUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time (in hundredths of a second) since the
+ network management portion of the system was last
+ re-initialized."
+ ::= { system 3 }
+
+
+sysName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "An administratively-assigned name for this managed
+ node. By convention, this is the node's fully-qualified
+ domain name. If the name is unknown, the value is
+ the zero-length string."
+ ::= { system 5 }
+
+sysLocation OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The physical location of this node (e.g., 'telephone
+ closet, 3rd floor'). If the location is unknown, the
+ value is the zero-length string."
+ ::= { system 6 }
+
+sysServices OBJECT-TYPE
+ SYNTAX INTEGER (0..127)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A value which indicates the set of services that this
+ entity may potentially offer. The value is a sum.
+
+ This sum initially takes the value zero. Then, for
+ each layer, L, in the range 1 through 7, that this node
+ performs transactions for, 2 raised to (L - 1) is added
+ to the sum. For example, a node which performs only
+ routing functions would have a value of 4 (2^(3-1)).
+ In contrast, a node which is a host offering application
+ services would have a value of 72 (2^(4-1) + 2^(7-1)).
+ Note that in the context of the Internet suite of
+ protocols, values should be calculated accordingly:
+
+ layer functionality
+ 1 physical (e.g., repeaters)
+ 2 datalink/subnetwork (e.g., bridges)
+ 3 internet (e.g., supports the IP)
+ 4 end-to-end (e.g., supports the TCP)
+ 7 applications (e.g., supports the SMTP)
+
+ For systems including OSI protocols, layers 5 and 6
+ may also be counted."
+ ::= { system 7 }
+
+
+
+ janitza OBJECT IDENTIFIER ::= { enterprises 34278}
+
+ rmsPhase OBJECT IDENTIFIER ::= { janitza 1 }
+
+ uLN1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage Phase L1 in 100mV"
+ ::= { rmsPhase 1 }
+
+ uLN2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage Phase L2 in 100mV"
+ ::= { rmsPhase 2 }
+
+ uLN3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage Phase L3 in 100mV"
+ ::= { rmsPhase 3 }
+
+ uLN4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage Pahse L4 in 100mV"
+ ::= { rmsPhase 4 }
+
+ uL1L2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage Phase L1-L2 in 100mV"
+ ::= { rmsPhase 5 }
+
+ uL2L3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage Phase L2-L3 in 100mV"
+ ::= { rmsPhase 6 }
+
+ uL3L1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage Phase L3-L1 in 100mV"
+ ::= { rmsPhase 7 }
+
+ iL1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current Phase L1 in 1mA"
+ ::= { rmsPhase 8 }
+
+ iL2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current Phase L2 in 1mA"
+ ::= { rmsPhase 9 }
+
+ iL3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current Phase L3 in 1mA"
+ ::= { rmsPhase 10 }
+
+ iL4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current Phase L4 in 1mA"
+ ::= { rmsPhase 11 }
+
+ pL1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Real Power L1 in Watt"
+ ::= { rmsPhase 12 }
+
+ pL2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Real Power L2 in Watt"
+ ::= { rmsPhase 13 }
+
+ pL3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Real Power L3 in Watt"
+ ::= { rmsPhase 14 }
+
+ pL4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Real Power L4 in Watt"
+ ::= { rmsPhase 15 }
+
+ qL1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktiv Power L1 in VAr"
+ ::= { rmsPhase 16 }
+
+ qL2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktiv Power L2 in VAr"
+ ::= { rmsPhase 17 }
+
+ qL3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktiv Power L3 in VAr"
+ ::= { rmsPhase 18 }
+
+ qL4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktiv Power L4 in VAr"
+ ::= { rmsPhase 19 }
+
+ sL1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Power L1 in VA"
+ ::= { rmsPhase 20 }
+
+ sL2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Power L2 in VA"
+ ::= { rmsPhase 21 }
+
+ sL3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Power L3 in VA"
+ ::= { rmsPhase 22 }
+
+ sL4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Power L4 in VA"
+ ::= { rmsPhase 23 }
+
+ cosPL1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Cos(Phi) L1 * 0.001"
+ ::= { rmsPhase 24 }
+
+ cosPL2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Cos(Phi) L2 * 0.001"
+ ::= { rmsPhase 25 }
+
+ cosPL3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Cos(Phi) L3 * 0.001"
+ ::= { rmsPhase 26 }
+
+ cosPL4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Cos(Phi) L4 * 0.001"
+ ::= { rmsPhase 27 }
+
+
+ rmsSumme3 OBJECT IDENTIFIER ::= { janitza 2 }
+
+ p3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Real Power Summe L1..L3 in Watt"
+ ::= { rmsSumme3 1}
+
+ q3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktiv Power Summe L1..L3 in Watt"
+ ::= { rmsSumme3 2}
+
+ s3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Power Summe L1..L3 in Watt"
+ ::= { rmsSumme3 3}
+
+ cosP3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "COS(Phi) Summe L1..L3 *0.001"
+ ::= { rmsSumme3 4}
+
+
+ rmsSumme4 OBJECT IDENTIFIER ::= { janitza 3 }
+
+ p4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Real Power Summe L1..L4 in Watt"
+ ::= { rmsSumme4 1}
+
+ q4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktiv Power Summe L1..L4 in Watt"
+ ::= { rmsSumme4 2}
+
+ s4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Power Summe L1..L4 in Watt"
+ ::= { rmsSumme4 3}
+
+ cosP4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "COS(Phi) Summe L1..L4 *0.001"
+ ::= { rmsSumme4 4}
+
+
+
+ energiePhase OBJECT IDENTIFIER ::= { janitza 4 }
+
+ whL1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Active Energie Phase L1 in 0.1 KWh"
+ ::= { energiePhase 1}
+
+ whL2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Active Energie Phase L2 in 0.1 KWh"
+ ::= { energiePhase 2}
+
+ whL3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Active Energie Phase L3 in 0.1 KWh"
+ ::= { energiePhase 3}
+
+ whL4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Active Energie Phase L4 in 0.1 KWh"
+ ::= { energiePhase 4}
+
+
+ qhL1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktive Energie Phase L1 in 0.1 KVArh"
+ ::= { energiePhase 5}
+
+ qhL2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktive Energie Phase L2 in 0.1 KVArh"
+ ::= { energiePhase 6}
+
+ qhL3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktive Energie Phase L3 in 0.1 KVArh"
+ ::= { energiePhase 7}
+
+ qhL4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktive Energie Phase L4 in 0.1 KVArh"
+ ::= { energiePhase 8}
+
+
+ energieSumme3 OBJECT IDENTIFIER ::= { janitza 5 }
+
+ wh3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Active Energie Summe L1..L3 in 0.1 KWh"
+ ::= { energieSumme3 1}
+
+ qh3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktive Energie Summe L1..L3 in 0.1 KWh"
+ ::= { energieSumme3 2}
+
+ energieSumme4 OBJECT IDENTIFIER ::= { janitza 6 }
+
+ wh4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Active Energie Summe L1..L4 in 0.1 KWh"
+ ::= { energieSumme4 1}
+
+ qh4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reaktive Energie Summe L1..L4 in 0.1 KWh"
+ ::= { energieSumme4 2}
+
+ thd OBJECT IDENTIFIER ::= { janitza 7 }
+
+ thdULN1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Total Harmonic Distortion Voltage Phase L1 * 0.1%"
+ ::= { thd 1 }
+
+ thdULN2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Total Harmonic Distortion Voltage Phase L2 * 0.1%"
+ ::= { thd 2 }
+
+ thdULN3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Total Harmonic Distortion Voltage Phase L3 * 0.1%"
+ ::= { thd 3 }
+
+ thdULN4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Total Harmonic Distortion Voltage Phase L4 * 0.1%"
+ ::= { thd 4 }
+
+ thdIL1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Total Harmonic Distortion Current Phase L1 * 0.1%"
+ ::= { thd 5 }
+
+ thdIL2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Total Harmonic Distortion Current Phase L2 * 0.1%"
+ ::= { thd 6 }
+
+ thdIL3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Total Harmonic Distortion Current Phase L3 * 0.1%"
+ ::= { thd 7 }
+
+ thdIL4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Total Harmonic Distortion Current Phase L4 * 0.1%"
+ ::= { thd 8 }
+
+ misc OBJECT IDENTIFIER ::= { janitza 8 }
+
+ frequenz OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Frequenz* 0.01 Hz"
+ ::= { misc 1 }
+
+ user OBJECT IDENTIFIER ::= { janitza 9 }
+
+ jasicVAR1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[0]"
+ ::= { user 1 }
+
+ jasicVAR2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[1]"
+ ::= { user 2 }
+
+ jasicVAR3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[2]"
+ ::= { user 3 }
+
+ jasicVAR4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[3]"
+ ::= { user 4 }
+
+ jasicVAR5 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[4]"
+ ::= { user 5 }
+
+ jasicVAR6 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[5]"
+ ::= { user 6 }
+
+ jasicVAR7 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[6]"
+ ::= { user 7 }
+
+ jasicVAR8 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[7]"
+ ::= { user 8 }
+
+ jasicVAR9 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[8]"
+ ::= { user 9 }
+
+ jasicVAR10 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[9]"
+ ::= { user 10 }
+
+ jasicVAR11 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[10]"
+ ::= { user 11 }
+
+ jasicVAR12 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[11]"
+ ::= { user 12 }
+
+ jasicVAR13 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[12]"
+ ::= { user 13 }
+
+ jasicVAR14 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[13]"
+ ::= { user 14 }
+
+ jasicVAR15 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[14]"
+ ::= { user 15 }
+
+ jasicVAR16 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jasic User Variable to user for Jasic :_snmp_uservar[15]"
+ ::= { user 16 }
+
+
+
+ coldStart TRAP-TYPE
+ ENTERPRISE snmp
+ DESCRIPTION
+ "A coldStart trap signifies that the sending
+ protocol entity is reinitializing itself such
+ that the agent's configuration or the rotocol
+ entity implementation may be altered."
+ ::= 0
+
+ warmStart TRAP-TYPE
+ ENTERPRISE snmp
+ DESCRIPTION
+ "A warmStart trap signifies that the sending
+ protocol entity is reinitializing itself such
+ that neither the agent configuration nor the
+ protocol entity implementation is altered."
+ ::= 1
+
+
+
+ userTrap1 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 6"
+ ::= 6
+
+ userTrap2 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 7"
+ ::= 7
+
+ userTrap3 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 8"
+ ::= 8
+
+ userTrap4 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 9"
+ ::= 9
+
+ userTrap5 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 10"
+ ::= 10
+
+ userTrap6 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 11"
+ ::= 11
+
+ userTrap7 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 12"
+ ::= 12
+
+ userTrap8 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 13"
+ ::= 13
+
+ userTrap9 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 14"
+ ::= 14
+
+ userTrap10 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 15"
+ ::= 15
+
+ userTrap11 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 16"
+ ::= 16
+
+ userTrap12 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 17"
+ ::= 17
+
+ userTrap13 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 18"
+ ::= 18
+
+ userTrap14 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 19"
+ ::= 19
+
+ userTrap15 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 20"
+ ::= 20
+
+ userTrap16 TRAP-TYPE
+ ENTERPRISE janitza
+ DESCRIPTION
+ "Jasic Trap : use type=6 , subtype = 21"
+ ::= 21
+
+ END
\ No newline at end of file |