diff options
Diffstat (limited to 'MIBS/junos/JUNIPER-ALARM-MIB')
| -rw-r--r-- | MIBS/junos/JUNIPER-ALARM-MIB | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/MIBS/junos/JUNIPER-ALARM-MIB b/MIBS/junos/JUNIPER-ALARM-MIB new file mode 100644 index 0000000..515fdd8 --- /dev/null +++ b/MIBS/junos/JUNIPER-ALARM-MIB @@ -0,0 +1,185 @@ +-- +-- Juniper Enterprise Specific MIB: Alarm MIB +-- +-- Copyright (c) 2001-2003, Juniper Networks, Inc. +-- All rights reserved. +-- +-- The contents of this document are subject to change without notice. +-- + +JUNIPER-ALARM-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Gauge32 + FROM SNMPv2-SMI + TimeStamp + FROM SNMPv2-TC + jnxMibs + FROM JUNIPER-SMI; + +jnxAlarms MODULE-IDENTITY + LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:46 2003 UTC + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Technical Assistance Center + Juniper Networks, Inc. + 1133 Innovation Way + Sunnyvale, CA 94089 + E-mail: support@juniper.net" + + DESCRIPTION + "This is Juniper Networks' implementation of enterprise + specific MIB for alarms from the router chassis box." + ::= { jnxMibs 4 } + + + + +-- ::= { jnxAlarms 1 } This OID is obsolete. + + +-- +-- Craft Alarms +-- + + jnxCraftAlarms OBJECT IDENTIFIER ::= { jnxAlarms 2 } + + + jnxAlarmRelayMode OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- other or unknown + passOn(2), -- alarms being passed on + cutOff(3) -- alarms being cut off + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The alarm relay mode of the craft interface + panel for both yellow and red alarms. + + Both yellow and red alarms could be cut off + by a front panel Alarm Cutoff / Lamp Test + (ACO/LT) button. + + In the pass-on mode, the alarm relay will be + activated to pass on the yellow or red alarms. + In the cut-off mode, both yellow and red alarms + will be cut off from the alarm relays which are + normally connected to audible sirens or visual + flashing devices." + + + ::= { jnxCraftAlarms 1 } + + + jnxYellowAlarms OBJECT IDENTIFIER ::= { jnxCraftAlarms 2 } + + jnxYellowAlarmState OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- alarm state is unknown + off(2), -- alarm is off + on(3) -- alarm is on + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The yellow alarm state on the craft interface + panel. + + The yellow alarm is on when there is some + system warning such as maintenance alert or + significant temperature increase. + + This yellow alarm state could be turned off + by the ACO/LT (Alarm Cut Off / Lamp Test) button + on the front panel module." + + + ::= { jnxYellowAlarms 1 } + + jnxYellowAlarmCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of currently active and non-silent + yellow alarms. + + This object is independent of the ACO/LT (Alarm + Cut Off / Lamp Test) button." + + + ::= { jnxYellowAlarms 2 } + + + jnxYellowAlarmLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the yellow alarm + last changed - either from off to on or vice + versa. Zero if unknown or never changed since + the agent was up." + + + ::= { jnxYellowAlarms 3 } + + + jnxRedAlarms OBJECT IDENTIFIER ::= { jnxCraftAlarms 3 } + + jnxRedAlarmState OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- alarm state is unknown + off(2), -- alarm is off + on(3) -- alarm is on + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The red alarm indication on the craft interface + panel. + + The red alarm is on when there is some system + failure or power supply failure or the system + is experiencing a hardware malfunction or some + threshold is being exceeded. + + This red alarm state could be turned off by the + ACO/LT (Alarm Cut Off / Lamp Test) button on the + front panel module." + + + ::= { jnxRedAlarms 1 } + + + jnxRedAlarmCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of currently active and non-silent + red alarms. + + This object is independent of the ACO/LT (Alarm + Cut Off / Lamp Test) button." + + + ::= { jnxRedAlarms 2 } + + + jnxRedAlarmLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the red alarm + last changed - either from off to on or vice + versa. Zero if unknown or never changed since + the agent was up." + + + ::= { jnxRedAlarms 3 } + + +END |