diff options
Diffstat (limited to 'MIBS/junos/JUNIPER-BFD-MIB')
| -rw-r--r-- | MIBS/junos/JUNIPER-BFD-MIB | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/MIBS/junos/JUNIPER-BFD-MIB b/MIBS/junos/JUNIPER-BFD-MIB new file mode 100644 index 0000000..ef3d5b7 --- /dev/null +++ b/MIBS/junos/JUNIPER-BFD-MIB @@ -0,0 +1,177 @@ +JUNIPER-BFD-MIB DEFINITIONS ::= BEGIN + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Unsigned32, NOTIFICATION-TYPE + FROM SNMPv2-SMI -- [RFC2578] + + bfdSessIndex + FROM BFD-STD-MIB -- [jnx-bfd-exp] + + DisplayString, TimeStamp, TruthValue + FROM SNMPv2-TC + + jnxBfdMibRoot -- [jnx-smi] + FROM JUNIPER-SMI + ; + + jnxBfdMib MODULE-IDENTITY + LAST-UPDATED "200610121200Z" -- 12 Oct 2006 12:00:00 EST + ORGANIZATION "IETF" + CONTACT-INFO + " Juniper Technical Assistance Center + Juniper Networks, Inc. + 1133 Innovation Way + Sunnyvale, CA 94089 + E-mail: support@juniper.net" + + DESCRIPTION + "Provides BFD specific data." + + -- Revision history. + REVISION + "200610121200Z" -- 12 Oct 2006 12:00:00 EST + DESCRIPTION + "Initial version." + ::= { jnxBfdMibRoot 1 } + + -- Top level components of this MIB module. + + jnxBfdNotification OBJECT IDENTIFIER ::= { jnxBfdMib 0 } + + jnxBfdObjects OBJECT IDENTIFIER ::= { jnxBfdMib 1 } + + jnxBfdNotifyObjects OBJECT IDENTIFIER ::= { jnxBfdMib 2 } + + -- BFD Session Extn Table + -- This table is a juniper extn to jnxSessTable + + jnxBfdSessTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxBfdSessEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines the jnxBfd Session Table for providing enterprise + specific options to the corresponding bfdSessTable entry." + ::= { jnxBfdObjects 1 } + + jnxBfdSessEntry OBJECT-TYPE + SYNTAX JnxBfdSessEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines an entry in the jnxBfdSessTable. This essentially + augments the bfdSessTable with additional objects." + INDEX { bfdSessIndex } + ::= { jnxBfdSessTable 1 } + + JnxBfdSessEntry ::= + SEQUENCE { + jnxBfdSessThreshTxInterval Unsigned32, + jnxBfdSessCurrTxInterval Unsigned32, + jnxBfdSessThreshDectTime Unsigned32, + jnxBfdSessCurrDectTime Unsigned32, + jnxBfdSessIntfName DisplayString + } + + jnxBfdSessThreshTxInterval OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The threshold value for transmit interval in microseconds. + If the current transmit interval value adapts to a value + greater than the threshold value, jnxBfdSessTxIntervalHigh + trap is raised." + ::= { jnxBfdSessEntry 1} + + jnxBfdSessCurrTxInterval OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current transmit interval in microseconds." + ::= { jnxBfdSessEntry 2} + + jnxBfdSessThreshDectTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The threshold value for detection time in microseconds. + If the current detection time value is greater than the + threshold value at the time when session state changes + to up(1), jnxBfdSessDetectionTimeHigh trap is raised." + ::= { jnxBfdSessEntry 3} + + jnxBfdSessCurrDectTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The actual value of detection time for the session." + ::= { jnxBfdSessEntry 4} + + jnxBfdSessIntfName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the interface associated with + the bfd session" + ::= { jnxBfdSessEntry 5} + + -- Notification Objects + + jnxBfdSessifName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This object gives the Interface Name in the bfdSessUp and + bfdSessDown trap. Even though this object doesnt appear in + the OBJECTS list of these traps, but the agent relay this + information as an extra parameter in the trap." + ::= { jnxBfdNotifyObjects 1} + + -- Notification Configuration + + jnxBfdSessTxIntervalHigh NOTIFICATION-TYPE + OBJECTS {jnxBfdSessThreshTxInterval, + jnxBfdSessCurrTxInterval + } + STATUS current + DESCRIPTION + "This notification is generated when the threshold value for + transmit interval (jnxBfdSessThreshTxInterval) is set and + the bfd session transmit interval (jnxBfdSessCurrTxInterval) + adapts to a value greater than the threshold value. This trap + is sent only once, when we first exceed the threshold. The + transmit interval can continue to adapt beyond the threshold + value. Adaptation of transmit interval happens due to network + issues causing the BFD session to go down on either the local + system or the remote neighbor." + ::= { jnxBfdNotification 1 } + + + jnxBfdSessDetectionTimeHigh NOTIFICATION-TYPE + OBJECTS {jnxBfdSessThreshDectTime, + jnxBfdSessCurrDectTime + } + STATUS current + DESCRIPTION + "This notification is generated when the threshold value for + detection time (jnxBfdSessThreshDectTime) is set and the bfd + session detection-time (jnxBfdSessCurrDectTime) adapts to a + value greater than the threshold value. This trap is sent only + once, when we first exceed the threshold. The detection-time + can continue to adapt beyond the threshold value. Adaptation + of detection-time happens due to network issues causing the + BFD session to go down on either the local system or the remote + neighbor." + ::= { jnxBfdNotification 2 } + +END |