summaryrefslogtreecommitdiff
path: root/MIBS/junos/JUNIPER-FABRIC-CHASSIS
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/junos/JUNIPER-FABRIC-CHASSIS')
-rw-r--r--MIBS/junos/JUNIPER-FABRIC-CHASSIS1978
1 files changed, 1978 insertions, 0 deletions
diff --git a/MIBS/junos/JUNIPER-FABRIC-CHASSIS b/MIBS/junos/JUNIPER-FABRIC-CHASSIS
new file mode 100644
index 0000000..d030561
--- /dev/null
+++ b/MIBS/junos/JUNIPER-FABRIC-CHASSIS
@@ -0,0 +1,1978 @@
+--
+-- Juniper Enterprise Specific MIB: Fabric Chassis MIB
+--
+-- Copyright (c) 2012, Juniper Networks, Inc.
+-- All rights reserved.
+--
+
+JUNIPER-FABRIC-CHASSIS DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+ Integer32, Counter32, TimeTicks
+ FROM SNMPv2-SMI
+ DisplayString, TEXTUAL-CONVENTION, DateAndTime
+ FROM SNMPv2-TC
+ jnxDcfMibRoot, jnxFabricChassisTraps, jnxFabricChassisOKTraps
+ FROM JUNIPER-SMI
+ JnxChassisId
+ FROM JUNIPER-MIB;
+
+jnxFabricAnatomy MODULE-IDENTITY
+
+ LAST-UPDATED "201209130000Z" -- Thur Sept 13 00:00:00 2012 UTC
+ ORGANIZATION "Juniper Networks, Inc."
+ CONTACT-INFO
+ " Juniper Technical Assistance Center
+ Juniper Networks, Inc.
+ 1133 Innovation Way
+ Sunnyvale, CA 94089
+ E-mail: support@juniper.net"
+
+ DESCRIPTION
+ "The MIB modules representing Juniper Networks'
+ Quantum Fabric hardware components."
+
+ REVISION
+ "201209130000Z" -- Thur Sept 13 00:00:00 2012 UTC
+ DESCRIPTION
+ "Added director group device (DG) enum to JnxFabricContainersFamily."
+ REVISION
+ "201207260000Z" -- Thur July 26 00:00:00 2012 UTC
+ DESCRIPTION
+ "Modified the description for JnxFabricDeviceId. Added
+ ufabric as part of JnxFabricContainersFamily."
+
+ ::= { jnxDcfMibRoot 2 }
+
+jnxFabricAnatomyScalars OBJECT IDENTIFIER ::= { jnxFabricAnatomy 1 }
+jnxFabricAnatomyTables OBJECT IDENTIFIER ::= { jnxFabricAnatomy 2 }
+
+
+--
+-- Textual Conventions
+--
+
+JnxFabricDeviceId ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The device identifier assigned to the individual devices across the fabric by SFC.
+ This shall be a unique index for each of the devices constituting the fabric."
+ SYNTAX Integer32 (1..2147483647)
+
+
+JnxFabricContainersFamily ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The family of container that defines the device."
+ SYNTAX INTEGER {
+ fabricChassis(1),
+ fabricNode(2),
+ ufabric(3),
+ directorGroupDevice(4)
+ }
+
+
+-- Juniper Fabric Anatomy MIB
+--
+
+-- Fabric Scalar Objects
+
+ jnxFabricClass OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The product line of the fabric switch."
+ ::= { jnxFabricAnatomyScalars 1 }
+
+ jnxFabricDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name, model, or detailed description of the fabric,
+ indicating which product the fabric is about."
+ ::= { jnxFabricAnatomyScalars 2 }
+
+ jnxFabricSerialNo OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The serial number of this subject, blank if unknown
+ or unavailable."
+ ::= { jnxFabricAnatomyScalars 3 }
+
+ jnxFabricRevision OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The revision of this subject, blank if unknown or
+ unavailable."
+ ::= { jnxFabricAnatomyScalars 4 }
+
+ jnxFabricFirmwareRevision OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The firmware (u-boot) revision of this subject, blank if unknown or
+ unavailable."
+ ::= { jnxFabricAnatomyScalars 5 }
+
+ jnxFabricLastInstalled OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the subject was last
+ installed, up-and-running. Zero if unknown or
+ already up-and-running when the agent was up."
+ ::= { jnxFabricAnatomyScalars 6 }
+
+ jnxFabricContentsLastChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the fabric contents
+ table last changed. Zero if unknown or already
+ existing when the agent was up."
+ ::= { jnxFabricAnatomyScalars 7 }
+
+ jnxFabricFilledLastChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the fabric filled
+ status table last changed. Zero if unknown or
+ already at that state when the agent was up."
+ ::= { jnxFabricAnatomyScalars 8 }
+
+--
+-- Fabric Device Table
+--
+
+ jnxFabricDeviceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF JnxFabricDeviceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of fabric device entries."
+ ::= { jnxFabricAnatomyTables 1 }
+
+ jnxFabricDeviceEntry OBJECT-TYPE
+ SYNTAX JnxFabricDeviceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of fabric device table."
+ INDEX { jnxFabricDeviceIndex }
+ ::= { jnxFabricDeviceTable 1 }
+
+ JnxFabricDeviceEntry ::= SEQUENCE {
+ jnxFabricDeviceIndex JnxFabricDeviceId,
+ jnxFabricDeviceEntryContainersFamily JnxFabricContainersFamily,
+ jnxFabricDeviceEntryClass OBJECT IDENTIFIER,
+ jnxFabricDeviceEntryModel OBJECT IDENTIFIER,
+ jnxFabricDeviceEntryDescr DisplayString,
+ jnxFabricDeviceEntrySerialNo DisplayString,
+ jnxFabricDeviceEntryName DisplayString,
+ jnxFabricDeviceEntryRevision DisplayString,
+ jnxFabricDeviceEntryFirmwareRevision DisplayString,
+ jnxFabricDeviceEntryInstalled TimeTicks,
+ jnxFabricDeviceEntryContentsLastChange TimeTicks,
+ jnxFabricDeviceEntryFilledLastChange TimeTicks,
+ jnxFabricDeviceEntryKernelMemoryUsedPercent Integer32
+ }
+
+ jnxFabricDeviceIndex OBJECT-TYPE
+ SYNTAX JnxFabricDeviceId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identifies the device on which the contents of this
+ row exists."
+ ::= { jnxFabricDeviceEntry 1 }
+
+ jnxFabricDeviceEntryContainersFamily OBJECT-TYPE
+ SYNTAX JnxFabricContainersFamily
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The family of container that defines this device."
+ ::= { jnxFabricDeviceEntry 2 }
+
+ jnxFabricDeviceEntryClass OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The productline of the device entry."
+ ::= { jnxFabricDeviceEntry 3 }
+
+ jnxFabricDeviceEntryModel OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The model object identifier of the device entry."
+ ::= { jnxFabricDeviceEntry 4 }
+
+ jnxFabricDeviceEntryDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name or detailed description of the device entry."
+ ::= { jnxFabricDeviceEntry 5 }
+
+ jnxFabricDeviceEntrySerialNo OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The serial number of this subject, blank if unknown
+ or unavailable."
+ ::= { jnxFabricDeviceEntry 6 }
+
+ jnxFabricDeviceEntryName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name of this subject which is same as the serial
+ number unless a device alias has been configured."
+ ::= { jnxFabricDeviceEntry 7 }
+
+ jnxFabricDeviceEntryRevision OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The revision of this subject, blank if unknown or
+ unavailable."
+ ::= { jnxFabricDeviceEntry 8 }
+
+ jnxFabricDeviceEntryFirmwareRevision OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The firmware (u-boot) revision of this subject, blank if unknown or
+ unavailable."
+ ::= { jnxFabricDeviceEntry 9 }
+
+ jnxFabricDeviceEntryInstalled OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the subject was last
+ installed, up-and-running. Zero if unknown or
+ already up-and-running when the agent was up."
+ ::= { jnxFabricDeviceEntry 10 }
+
+ jnxFabricDeviceEntryContentsLastChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the contents
+ table last changed. Zero if unknown or already
+ existing when the agent was up."
+ ::= { jnxFabricDeviceEntry 11 }
+
+ jnxFabricDeviceEntryFilledLastChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the filled
+ status table last changed. Zero if unknown or
+ already at that state when the agent was up."
+ ::= { jnxFabricDeviceEntry 12 }
+
+ jnxFabricDeviceEntryKernelMemoryUsedPercent OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The percentage of kernel memory used
+ of this subject. 0 if unavailable or
+ inapplicable."
+ ::= { jnxFabricDeviceEntry 13 }
+
+--
+-- Fabric Containers Table
+--
+
+ jnxFabricContainersTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF JnxFabricContainersEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of containers entries."
+ ::= { jnxFabricAnatomyTables 2 }
+
+ jnxFabricContainersEntry OBJECT-TYPE
+ SYNTAX JnxFabricContainersEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of containers table. Each entry is
+ indexed by the container table type and
+ the container index."
+
+ INDEX { jnxFabricContainersFamily,
+ jnxFabricContainersIndex }
+ ::= { jnxFabricContainersTable 1 }
+
+ JnxFabricContainersEntry ::= SEQUENCE {
+ jnxFabricContainersFamily JnxFabricContainersFamily,
+ jnxFabricContainersIndex Integer32,
+ jnxFabricContainersView BITS,
+ jnxFabricContainersLevel INTEGER,
+ jnxFabricContainersWithin Integer32,
+ jnxFabricContainersType OBJECT IDENTIFIER,
+ jnxFabricContainersDescr DisplayString,
+ jnxFabricContainersCount Integer32
+ }
+
+ jnxFabricContainersFamily OBJECT-TYPE
+ SYNTAX JnxFabricContainersFamily
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The family of container."
+ ::= { jnxFabricContainersEntry 1 }
+
+ jnxFabricContainersIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index for this entry."
+ ::= { jnxFabricContainersEntry 2 }
+
+ jnxFabricContainersView OBJECT-TYPE
+ SYNTAX BITS {
+ viewFront(0),
+ viewRear(1),
+ viewTop(2),
+ viewBottom(3),
+ viewLeftHandSide(4),
+ viewRightHandSide(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The view(s) from which the specific container
+ appears.
+
+ This variable indicates that the specific container
+ is embedded and accessible from the corresponding
+ view(s).
+
+ The value is a bit map represented as a sum.
+ If multiple bits are set, the specified
+ container(s) are located and accessible from
+ that set of views.
+
+ The various values representing the bit positions
+ and its corresponding views are:
+ 1 front
+ 2 rear
+ 4 top
+ 8 bottom
+ 16 leftHandSide
+ 32 rightHandSide
+
+ Note 1:
+ LefHandSide and rightHandSide are referred
+ to based on the view from the front.
+
+ Note 2:
+ If the specified containers are scattered
+ around various views, the numbering is according
+ to the following sequence:
+ front -> rear -> top -> bottom
+ -> leftHandSide -> rightHandSide
+ For each view plane, the numbering sequence is
+ first from left to right, and then from up to down.
+
+ Note 3:
+ Even though the value in chassis hardware (e.g.
+ slot number) may be labelled from 0, 1, 2, and up,
+ all the indices in MIB start with 1 (not 0)
+ according to network management convention."
+ ::= { jnxFabricContainersEntry 3 }
+
+ jnxFabricContainersLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ level0(0),
+ level1(1),
+ level2(2),
+ level3(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The abstraction level of the chassis or device.
+ It is enumerated from the outside to the inside,
+ from the outer layer to the inner layer.
+ For example, top level (i.e. level 0) refers to
+ chassis frame, level 1 FPC slot within chassis
+ frame, level 2 PIC space within FPC slot."
+ ::= { jnxFabricContainersEntry 4 }
+
+ jnxFabricContainersWithin OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of its next higher level container
+ housing this entry. The associated
+ jnxFabricContainersIndex in the jnxFabricContainersTable
+ represents its next higher level container."
+ ::= { jnxFabricContainersEntry 5 }
+
+ jnxFabricContainersType OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of this container."
+ ::= { jnxFabricContainersEntry 6 }
+
+ jnxFabricContainersDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name or detailed description of this
+ subject."
+ ::= { jnxFabricContainersEntry 7 }
+
+ jnxFabricContainersCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of containers of this level
+ per container of the next higher level.
+ e.g. if there are six level 2 containers in
+ level 1 container, then jnxFabricContainersCount for
+ level 2 is six."
+ ::= { jnxFabricContainersEntry 8 }
+
+--
+-- Fabric Contents Table
+--
+
+ jnxFabricContentsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF JnxFabricContentsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of contents entries."
+ ::= { jnxFabricAnatomyTables 3 }
+
+ jnxFabricContentsEntry OBJECT-TYPE
+ SYNTAX JnxFabricContentsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of contents table."
+ INDEX { jnxFabricDeviceIndex,
+ jnxFabricContentsContainerIndex,
+ jnxFabricContentsL1Index,
+ jnxFabricContentsL2Index,
+ jnxFabricContentsL3Index }
+ ::= { jnxFabricContentsTable 1 }
+
+ JnxFabricContentsEntry ::= SEQUENCE {
+ jnxFabricContentsContainerIndex Integer32,
+ jnxFabricContentsL1Index Integer32,
+ jnxFabricContentsL2Index Integer32,
+ jnxFabricContentsL3Index Integer32,
+ jnxFabricContentsType OBJECT IDENTIFIER,
+ jnxFabricContentsDescr DisplayString,
+ jnxFabricContentsSerialNo DisplayString,
+ jnxFabricContentsRevision DisplayString,
+ jnxFabricContentsInstalled TimeTicks,
+ jnxFabricContentsPartNo DisplayString,
+ jnxFabricContentsChassisId JnxChassisId,
+ jnxFabricContentsChassisDescr DisplayString,
+ jnxFabricContentsChassisCleiCode DisplayString
+ }
+
+ jnxFabricContentsContainerIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The associated jnxFabricContainersIndex in the
+ jnxFabricContainersTable."
+ ::= { jnxFabricContentsEntry 1 }
+
+ jnxFabricContentsL1Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level one index of the container
+ housing this subject. Zero if unavailable
+ or inapplicable."
+ ::= { jnxFabricContentsEntry 2 }
+
+ jnxFabricContentsL2Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level two index of the container
+ housing this subject. Zero if unavailable
+ or inapplicable."
+ ::= { jnxFabricContentsEntry 3 }
+
+ jnxFabricContentsL3Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level three index of the container
+ housing this subject. Zero if unavailable
+ or inapplicable."
+ ::= { jnxFabricContentsEntry 4 }
+
+ jnxFabricContentsType OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of this subject. zeroDotZero
+ if unknown."
+ ::= { jnxFabricContentsEntry 5 }
+
+ jnxFabricContentsDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name or detailed description of this
+ subject."
+ ::= { jnxFabricContentsEntry 6 }
+
+ jnxFabricContentsSerialNo OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The serial number of this subject, blank if
+ unknown or unavailable."
+ ::= { jnxFabricContentsEntry 7 }
+
+ jnxFabricContentsRevision OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The revision of this subject, blank if unknown
+ or unavailable."
+ ::= { jnxFabricContentsEntry 8 }
+
+ jnxFabricContentsInstalled OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the subject was last
+ installed, up-and-running. Zero if unknown
+ or already up-and-running when the agent was up."
+ ::= { jnxFabricContentsEntry 9 }
+
+ jnxFabricContentsPartNo OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The part number of this subject, blank if unknown
+ or unavailable."
+ ::= { jnxFabricContentsEntry 10 }
+
+ jnxFabricContentsChassisId OBJECT-TYPE
+ SYNTAX JnxChassisId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identifies the chassis on which the contents of this
+ row exists."
+ ::= { jnxFabricContentsEntry 11 }
+
+ jnxFabricContentsChassisDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of the chassis on which the
+ contents of this row exists."
+ ::= { jnxFabricContentsEntry 12 }
+
+ jnxFabricContentsChassisCleiCode OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The clei code of this subject, blank if unknown
+ or unavailable.
+
+ A CLEI code is an intelligent code that consists of 10
+ alphanumeric characters with 4 data elements. The first data
+ element is considered the basic code with the first 2 characters
+ indicating the technology or equipment type, and the third and
+ fourth characters denoting the functional sub-category. The
+ second data element represents the features, and its three
+ characters denote functional capabilities or changes. The third
+ data element has one character and denotes a reference to a
+ manufacturer, system ID, specification, or drawing. The fourth
+ data element consists of two characters and contains complementary
+ data. These two characters provide a means of differentiating or
+ providing uniqueness between the eight character CLEI codes by
+ identifying the manufacturing vintage of the product. Names are
+ assigned via procedures defined in [GR485].
+
+ The assigned maintenance agent for the CLEI code, Telcordia
+ Technologies, is responsible for assigning certain equipment and
+ other identifiers (e.g., location, manufacturer/supplier) for the
+ telecommunications industry."
+ ::= { jnxFabricContentsEntry 13 }
+
+--
+-- Fabric Filled Status Table
+--
+-- This table show the empty/filled status of the container in the
+-- fabric containers table.
+--
+
+ jnxFabricFilledTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF JnxFabricFilledEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of filled status entries."
+ ::= { jnxFabricAnatomyTables 4 }
+
+ jnxFabricFilledEntry OBJECT-TYPE
+ SYNTAX JnxFabricFilledEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of filled status table."
+ INDEX { jnxFabricDeviceIndex,
+ jnxFabricFilledContainerIndex,
+ jnxFabricFilledL1Index,
+ jnxFabricFilledL2Index,
+ jnxFabricFilledL3Index }
+ ::= { jnxFabricFilledTable 1 }
+
+ JnxFabricFilledEntry ::= SEQUENCE {
+ jnxFabricFilledContainerIndex Integer32,
+ jnxFabricFilledL1Index Integer32,
+ jnxFabricFilledL2Index Integer32,
+ jnxFabricFilledL3Index Integer32,
+ jnxFabricFilledDescr DisplayString,
+ jnxFabricFilledState INTEGER,
+ jnxFabricFilledChassisId JnxChassisId,
+ jnxFabricFilledChassisDescr DisplayString
+ }
+
+ jnxFabricFilledContainerIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The associated jnxFabricContainersIndex in the
+ jnxFabricContainersTable."
+ ::= { jnxFabricFilledEntry 1 }
+
+ jnxFabricFilledL1Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level one index of the container
+ housing this subject. Zero if unavailable
+ or inapplicable."
+ ::= { jnxFabricFilledEntry 2 }
+
+ jnxFabricFilledL2Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level two index of the container
+ housing this subject. Zero if unavailable
+ or inapplicable."
+ ::= { jnxFabricFilledEntry 3 }
+
+ jnxFabricFilledL3Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level three index of the container
+ housing this subject. Zero if unavailable
+ or inapplicable."
+ ::= { jnxFabricFilledEntry 4 }
+
+ jnxFabricFilledDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name or detailed description of this
+ subject."
+ ::= { jnxFabricFilledEntry 5 }
+
+ jnxFabricFilledState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ empty(2),
+ filled(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The filled state of this subject."
+ ::= { jnxFabricFilledEntry 6 }
+
+ jnxFabricFilledChassisId OBJECT-TYPE
+ SYNTAX JnxChassisId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identifies the chassis on which the contents of this
+ row exists."
+ ::= { jnxFabricFilledEntry 7 }
+
+ jnxFabricFilledChassisDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of the chassis on which the
+ contents of this row exists."
+ ::= { jnxFabricFilledEntry 8 }
+
+
+--
+-- Fabric Operating Status Table
+--
+-- This table reveals the operating status of some subjects
+-- of interest in the fabric contents table.
+--
+
+ jnxFabricOperatingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF JnxFabricOperatingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of operating status entries."
+ ::= { jnxFabricAnatomyTables 5 }
+
+ jnxFabricOperatingEntry OBJECT-TYPE
+ SYNTAX JnxFabricOperatingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of operating status table."
+ INDEX { jnxFabricDeviceIndex,
+ jnxFabricOperatingContentsIndex,
+ jnxFabricOperatingL1Index,
+ jnxFabricOperatingL2Index,
+ jnxFabricOperatingL3Index }
+ ::= { jnxFabricOperatingTable 1 }
+
+ JnxFabricOperatingEntry ::= SEQUENCE {
+ jnxFabricOperatingContentsIndex Integer32,
+ jnxFabricOperatingL1Index Integer32,
+ jnxFabricOperatingL2Index Integer32,
+ jnxFabricOperatingL3Index Integer32,
+ jnxFabricOperatingDescr DisplayString,
+ jnxFabricOperatingState INTEGER,
+ jnxFabricOperatingTemp Integer32,
+ jnxFabricOperatingCPU Integer32,
+ jnxFabricOperatingISR Integer32,
+ jnxFabricOperatingDRAMSize Integer32,
+ jnxFabricOperatingBuffer Integer32,
+ jnxFabricOperatingHeap Integer32,
+ jnxFabricOperatingUpTime TimeTicks,
+ jnxFabricOperatingLastRestart TimeTicks,
+ jnxFabricOperatingMemory Integer32,
+ jnxFabricOperatingStateOrdered INTEGER,
+ jnxFabricOperatingChassisId JnxChassisId,
+ jnxFabricOperatingChassisDescr DisplayString,
+ jnxFabricOperatingRestartTime DateAndTime,
+ jnxFabricOperating1MinLoadAvg Integer32,
+ jnxFabricOperating5MinLoadAvg Integer32,
+ jnxFabricOperating15MinLoadAvg Integer32
+ }
+
+ jnxFabricOperatingContentsIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The associated jnxFabricContentsContainerIndex in the
+ jnxFabricContentsTable."
+ ::= { jnxFabricOperatingEntry 1 }
+
+ jnxFabricOperatingL1Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level one index associated with this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 2 }
+
+ jnxFabricOperatingL2Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level two index associated with this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 3 }
+
+ jnxFabricOperatingL3Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level three index associated with this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 4 }
+
+ jnxFabricOperatingDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name or detailed description of this subject."
+ ::= { jnxFabricOperatingEntry 5 }
+
+ jnxFabricOperatingState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ running(2), -- up and running,
+ -- as a active primary
+ ready(3), -- ready to run, not running yet
+ reset(4), -- held in reset, not ready yet
+ runningAtFullSpeed(5),
+ -- valid for fans only
+ down(6), -- down or off, for power supply
+ standby(7) -- running as a standby backup
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operating state of this subject."
+ ::= { jnxFabricOperatingEntry 6 }
+
+ jnxFabricOperatingTemp OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Celsius (degrees C)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The temperature in Celsius (degrees C) of this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 7 }
+
+ jnxFabricOperatingCPU OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CPU utilization in percentage of this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 8 }
+
+ jnxFabricOperatingISR OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CPU utilization in percentage of this subject
+ spending in interrupt service routine (ISR).
+ Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 9 }
+
+ jnxFabricOperatingDRAMSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The DRAM size in bytes of this subject.
+ Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 10 }
+
+ jnxFabricOperatingBuffer OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The buffer pool utilization in percentage
+ of this subject. Zero if unavailable or
+ inapplicable."
+ ::= { jnxFabricOperatingEntry 11 }
+
+ jnxFabricOperatingHeap OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The heap utilization in percentage of
+ this subject. Zero if unavailable or
+ inapplicable."
+ ::= { jnxFabricOperatingEntry 12 }
+
+ jnxFabricOperatingUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time interval in 10-millisecond period
+ that this subject has been up and running.
+ Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 13 }
+
+ jnxFabricOperatingLastRestart OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this subject
+ last restarted. Zero if unavailable or
+ inapplicable."
+ ::= { jnxFabricOperatingEntry 14 }
+
+ jnxFabricOperatingMemory OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Megabytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The installed memory size in Megabytes
+ of this subject. Zero if unavailable or
+ inapplicable."
+ ::= { jnxFabricOperatingEntry 15 }
+
+ jnxFabricOperatingStateOrdered OBJECT-TYPE
+ SYNTAX INTEGER {
+ running(1), -- up and running,
+ -- as a active primary
+ standby(2), -- running as a standby backup
+ ready(3), -- ready to run, not running yet
+ runningAtFullSpeed(4),
+ -- valid for fans only
+ reset(5), -- held in reset, not ready yet
+ down(6), -- down or off, for power supply
+ unknown(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operating state of this subject. Identical to
+ jnxFabricOperatingState, but with enums ordered from 'most
+ operational' to 'least operational' states."
+ ::= { jnxFabricOperatingEntry 16 }
+
+ jnxFabricOperatingChassisId OBJECT-TYPE
+ SYNTAX JnxChassisId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identifies the chassis on which the contents of this
+ row exists."
+ ::= { jnxFabricOperatingEntry 17 }
+
+ jnxFabricOperatingChassisDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of the chassis on which the
+ contents of this row exists."
+ ::= { jnxFabricOperatingEntry 18 }
+
+ jnxFabricOperatingRestartTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time at which this entity
+ last restarted."
+ ::= { jnxFabricOperatingEntry 19 }
+
+ jnxFabricOperating1MinLoadAvg OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CPU Load Average over the last 1 minutes
+ Here it will be shown as percentage value
+ Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 20 }
+
+ jnxFabricOperating5MinLoadAvg OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CPU Load Average over the last 5 minutes
+ Here it will be shown as percentage value
+ Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 21 }
+
+ jnxFabricOperating15MinLoadAvg OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CPU Load Average over the last 15 minutes
+ Here it will be shown as percentage value
+ Zero if unavailable or inapplicable."
+ ::= { jnxFabricOperatingEntry 22 }
+
+--
+-- Fabric Redundancy Information Table
+--
+-- This table shows the internal configuration setting for the
+-- available redundant subsystems or components in the fabric.
+--
+
+ jnxFabricRedundancyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF JnxFabricRedundancyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of redundancy information entries."
+ ::= { jnxFabricAnatomyTables 6 }
+
+ jnxFabricRedundancyEntry OBJECT-TYPE
+ SYNTAX JnxFabricRedundancyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the redundancy information table."
+ INDEX { jnxFabricDeviceIndex,
+ jnxFabricRedundancyContentsIndex,
+ jnxFabricRedundancyL1Index,
+ jnxFabricRedundancyL2Index,
+ jnxFabricRedundancyL3Index }
+ ::= { jnxFabricRedundancyTable 1 }
+
+ JnxFabricRedundancyEntry ::= SEQUENCE {
+ jnxFabricRedundancyContentsIndex Integer32,
+ jnxFabricRedundancyL1Index Integer32,
+ jnxFabricRedundancyL2Index Integer32,
+ jnxFabricRedundancyL3Index Integer32,
+ jnxFabricRedundancyDescr DisplayString,
+ jnxFabricRedundancyConfig INTEGER,
+ jnxFabricRedundancyState INTEGER,
+ jnxFabricRedundancySwitchoverCount Counter32,
+ jnxFabricRedundancySwitchoverTime TimeTicks,
+ jnxFabricRedundancySwitchoverReason INTEGER,
+ jnxFabricRedundancyKeepaliveHeartbeat Integer32,
+ jnxFabricRedundancyKeepaliveTimeout Integer32,
+ jnxFabricRedundancyKeepaliveElapsed Integer32,
+ jnxFabricRedundancyKeepaliveLoss Counter32,
+ jnxFabricRedundancyChassisId JnxChassisId,
+ jnxFabricRedundancyChassisDescr DisplayString
+ }
+
+ jnxFabricRedundancyContentsIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The associated jnxFabricContentsContainerIndex in the
+ jnxFabricContentsTable."
+ ::= { jnxFabricRedundancyEntry 1 }
+
+ jnxFabricRedundancyL1Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level one index associated with this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricRedundancyEntry 2 }
+
+ jnxFabricRedundancyL2Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level two index associated with this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricRedundancyEntry 3 }
+
+ jnxFabricRedundancyL3Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level three index associated with this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricRedundancyEntry 4 }
+
+ jnxFabricRedundancyDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name or detailed description of this subject."
+ ::= { jnxFabricRedundancyEntry 5 }
+
+ jnxFabricRedundancyConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ master(2), -- election priority set as a master
+ backup(3), -- election priority set as a backup
+ disabled(4), -- election disabled
+ notApplicable(5) -- any among the available can be master
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The election priority of redundancy configuration for
+ this subject. The value 'notApplicable' means no
+ specific instance is configured to be master or
+ backup; whichever component boots up first becomes a
+ master."
+ ::= { jnxFabricRedundancyEntry 6 }
+
+ jnxFabricRedundancyState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ master(2), -- master
+ backup(3), -- backup
+ disabled(4) -- disabled
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current running state for this subject."
+ ::= { jnxFabricRedundancyEntry 7 }
+
+ jnxFabricRedundancySwitchoverCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of switchover as perceived by
+ this subject since routing engine is up and running.
+ The switchover is defined as a change in state of
+ jnxFabricRedundancyState from master to backup or vice
+ versa. Its value is reset when the routing engine
+ is reset or rebooted."
+ ::= { jnxFabricRedundancyEntry 8 }
+
+ jnxFabricRedundancySwitchoverTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the jnxFabricRedundancyState
+ of this subject was last switched over from master
+ to backup or vice versa. Zero if unknown or never
+ switched over since the routing engine is up and
+ running."
+ ::= { jnxFabricRedundancyEntry 9 }
+
+ jnxFabricRedundancySwitchoverReason OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- others
+ neverSwitched(2), -- never switched
+ userSwitched(3), -- user-initiated switchover
+ autoSwitched(4) -- automatic switchover
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The reason of the last switchover for this subject."
+ ::= { jnxFabricRedundancyEntry 10 }
+
+ jnxFabricRedundancyKeepaliveHeartbeat OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The period of sending keepalive messages between
+ the master and backup subsystems. It is a system-wide
+ preset value in seconds used by internal mastership
+ resolution. Zero if unavailable or inapplicable."
+ ::= { jnxFabricRedundancyEntry 11 }
+
+ jnxFabricRedundancyKeepaliveTimeout OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The timeout period in seconds, by the keepalive
+ watchdog timer, before initiating a switch over to
+ the backup subsystem. Zero if unavailable or
+ inapplicable."
+ ::= { jnxFabricRedundancyEntry 12 }
+
+ jnxFabricRedundancyKeepaliveElapsed OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The elapsed time in seconds by this subject since
+ receiving the last keepalive message from the other
+ subsystems. Zero if unavailable or inapplicable."
+ ::= { jnxFabricRedundancyEntry 13 }
+
+ jnxFabricRedundancyKeepaliveLoss OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of losses on keepalive messages
+ between the master and backup subsystems as perceived
+ by this subject since the system is up and running.
+ Zero if unavailable or inapplicable."
+ ::= { jnxFabricRedundancyEntry 14 }
+
+ jnxFabricRedundancyChassisId OBJECT-TYPE
+ SYNTAX JnxChassisId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identifies the chassis on which the contents of this
+ row exists."
+ ::= { jnxFabricRedundancyEntry 15 }
+
+ jnxFabricRedundancyChassisDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of the chassis on which the
+ contents of this row exists."
+ ::= { jnxFabricRedundancyEntry 16 }
+
+
+--
+-- FRU (Field Replaceable Unit) Status Table
+--
+-- This table shows the status of the FRUs in the chassis' within the fabric
+--
+
+ jnxFabricFruTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF JnxFabricFruEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of FRU status entries."
+ ::= { jnxFabricAnatomyTables 7 }
+
+ jnxFabricFruEntry OBJECT-TYPE
+ SYNTAX JnxFabricFruEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the FRU status table."
+ INDEX { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index }
+ ::= { jnxFabricFruTable 1 }
+
+ JnxFabricFruEntry ::= SEQUENCE {
+ jnxFabricFruContentsIndex Integer32,
+ jnxFabricFruL1Index Integer32,
+ jnxFabricFruL2Index Integer32,
+ jnxFabricFruL3Index Integer32,
+ jnxFabricFruName DisplayString,
+ jnxFabricFruType INTEGER,
+ jnxFabricFruSlot Integer32,
+ jnxFabricFruState INTEGER,
+ jnxFabricFruTemp Integer32,
+ jnxFabricFruOfflineReason INTEGER,
+ jnxFabricFruLastPowerOff TimeTicks,
+ jnxFabricFruLastPowerOn TimeTicks,
+ jnxFabricFruPowerUpTime TimeTicks,
+ jnxFabricFruChassisId JnxChassisId,
+ jnxFabricFruChassisDescr DisplayString,
+ jnxFabricFruPsdAssignment Integer32
+ }
+
+ jnxFabricFruContentsIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The associated jnxFabricContentsContainerIndex in the
+ jnxFabricContentsTable."
+ ::= { jnxFabricFruEntry 1 }
+
+ jnxFabricFruL1Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level one index associated with this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricFruEntry 2 }
+
+ jnxFabricFruL2Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level two index associated with this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricFruEntry 3 }
+
+ jnxFabricFruL3Index OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The level three index associated with this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricFruEntry 4 }
+
+ jnxFabricFruName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name or detailed description of this subject."
+ ::= { jnxFabricFruEntry 5 }
+
+ jnxFabricFruType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- unknown or others
+ clockGenerator(2), -- CG
+ flexiblePicConcentrator(3), -- FPC
+ switchingAndForwardingModule(4), -- SFM
+ controlBoard(5), -- CBD, SCB
+ routingEngine(6), -- RE
+ powerEntryModule(7), -- PEM
+ frontPanelModule(8), -- FPM
+ switchInterfaceBoard(9), -- SIB
+ processorMezzanineBoardForSIB(10), -- SPMB
+ portInterfaceCard(11), -- PIC
+ craftInterfacePanel(12), -- CIP
+ fan(13), -- fan
+ lineCardChassis(14), -- LCC
+ forwardingEngineBoard(15), -- FEB
+ protectedSystemDomain(16) -- PSD
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The FRU type for this subject."
+ ::= { jnxFabricFruEntry 6 }
+
+ jnxFabricFruSlot OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number of this subject. This is equivalent
+ to jnxFabricFruL1Index in meaning. Zero if unavailable or
+ inapplicable."
+ ::= { jnxFabricFruEntry 7 }
+
+ jnxFabricFruState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ empty(2),
+ present(3),
+ ready(4),
+ announceOnline(5),
+ online(6),
+ anounceOffline(7),
+ offline(8),
+ diagnostic(9),
+ standby(10)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current state for this subject."
+ ::= { jnxFabricFruEntry 8 }
+
+ jnxFabricFruTemp OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Celsius (degrees C)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The temperature in Celsius (degrees C) of this
+ subject. Zero if unavailable or inapplicable."
+ ::= { jnxFabricFruEntry 9 }
+
+ jnxFabricFruOfflineReason OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1), -- unknown or other
+ none(2), -- none
+ error(3), -- error
+ noPower(4), -- no power
+ configPowerOff(5), -- configured to power off
+ configHoldInReset(6), -- configured to hold in reset
+ cliCommand(7), -- offlined by cli command
+ buttonPress(8), -- offlined by button press
+ cliRestart(9), -- restarted by cli command
+ overtempShutdown(10), -- overtemperature shutdown
+ masterClockDown(11), -- master clock down
+ singleSfmModeChange(12), -- single SFM mode change
+ packetSchedulingModeChange(13), -- packet scheduling mode change
+ physicalRemoval(14), -- physical removal
+ unresponsiveRestart(15), -- restarting unresponsive board
+ sonetClockAbsent(16), -- sonet out clock absent
+ rddPowerOff(17), -- RDD power off
+ majorErrors(18), -- major errors
+ minorErrors(19), -- minor errors
+ lccHardRestart(20), -- LCC hard restart
+ lccVersionMismatch(21), -- LCC version mismatch
+ powerCycle(22), -- power cycle
+ reconnect(23), -- reconnect
+ overvoltage(24), -- overvoltage
+ pfeVersionMismatch(25), -- PFE version mismatch
+ febRddCfgChange(26), -- FEB redundancy cfg changed
+ fpcMisconfig(27), -- FPC is misconfigured
+ fruReconnectFail(28), -- FRU did not reconnect
+ fruFwddReset(29), -- FWDD reset the fru
+ fruFebSwitch(30), -- FEB got switched
+ fruFebOffline(31), -- FEB was offlined
+ fruInServSoftUpgradeError(32), -- In Service Software Upgrade Error
+ fruChasdPowerRatingExceed(33), -- Chassis power rating exceeded
+ fruConfigOffline(34), -- Configured offline
+ fruServiceRestartRequest(35), -- restarting request from a service
+ spuResetRequest(36), -- SPU reset request
+ spuFlowdDown(37), -- SPU flowd down
+ spuSpi4Down(38), -- SPU SPI4 down
+ spuWatchdogTimeout(39), -- SPU Watchdog timeout
+ spuCoreDump(40), -- SPU kernel core dump
+ fpgaSpi4LinkDown(41), -- FPGA SPI4 link down
+ i3Spi4LinkDown(42), -- I3 SPI4 link down
+ cppDisconnect(43), -- CPP disconnect
+ cpuNotBoot(44), -- CPU not boot
+ spuCoreDumpComplete(45), -- SPU kernel core dump complete
+ rstOnSpcSpuFailure(46), -- Rst on SPC SPU failure
+ softRstOnSpcSpuFailure(47), -- Soft Reset on SPC SPU failure
+ hwAuthenticationFailure(48), -- HW authentication failure
+ reconnectFpcFail(49), -- Reconnect FPC fail
+ fpcAppFailed(50), -- FPC app failed
+ fpcKernelCrash(51), -- FPC kernel crash
+ spuFlowdDownNoCore(52), -- SPU flowd down, no core dump
+ spuFlowdCoreDumpIncomplete(53), -- SPU flowd crash with incomplete core dump
+ spuFlowdCoreDumpComplete(54), -- SPU flowd crash with complete core dump
+ spuIdpdDownNoCore(55), -- SPU idpd down, no core dump
+ spuIdpdCoreDumpIncomplete(56), -- SPU idpd crash with incomplete core dump
+ spuIdpdCoreDumpComplete(57), -- SPU idpd crash with complete core dump
+ spuCoreDumpIncomplete(58), -- SPU kernel crash with incomplete core dump
+ spuIdpdDown(59), -- SPU idpd down
+ fruPfeReset(60), -- PFE reset
+ fruReconnectNotReady(61), -- FPC not ready to reconnect
+ fruSfLinkDown(62), -- FE - Fabric links down
+ fruFabricDown(63), -- Fabric transitioned from up to down
+ fruAntiCounterfeitRetry(64), -- FPC offlined due to Anti Counterfeit Retry
+ fruFPCChassisClusterDisable(65), -- FPC offlined due to Chassis Cluster Disable
+ spuFipsError(66), -- SPU fips error
+ fruFPCFabricDownOffline(67), -- FPC offlined due to Fabric down
+ febCfgChange(68), -- FEB config change
+ routeLocalizationRoleChange(69), -- Route localization role change
+ fruFpcUnsupported(70), -- FPC unsupported
+ psdVersionMismatch(71), -- PSD version mismatch
+ fruResetThresholdExceeded(72), -- FRU Reset Threshold Exceeded
+ picBounce(73), -- PIC Bounce
+ badVoltage(74), -- bad voltage
+ fruFPCReducedFabricBW(75) -- FPC offlined due to Reduced Fabric Bandwidth
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The offline reason of this subject."
+ ::= { jnxFabricFruEntry 10 }
+
+ jnxFabricFruLastPowerOff OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this subject was last
+ powered off. Zero if unavailable or inapplicable."
+ ::= { jnxFabricFruEntry 11 }
+
+ jnxFabricFruLastPowerOn OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this subject was last
+ powered on. Zero if unavailable or inapplicable."
+ ::= { jnxFabricFruEntry 12 }
+
+ jnxFabricFruPowerUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time interval in 10-millisecond period
+ that this subject has been up and running
+ since the last power on time. Zero if
+ unavailable or inapplicable."
+ ::= { jnxFabricFruEntry 13 }
+
+ jnxFabricFruChassisId OBJECT-TYPE
+ SYNTAX JnxChassisId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identifies the chassis on which the contents of this
+ row exists."
+ ::= { jnxFabricFruEntry 14 }
+
+ jnxFabricFruChassisDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of the chassis on which the
+ contents of this row exists."
+ ::= { jnxFabricFruEntry 15 }
+
+ jnxFabricFruPsdAssignment OBJECT-TYPE
+ SYNTAX Integer32 (0..31)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The PSD assignment of this subject. Zero if unavailable or
+ not applicable."
+ ::= { jnxFabricFruEntry 16 }
+
+--
+-- definition of chassis related traps
+--
+ -- Traps for chassis alarm conditions
+
+ jnxFabricPowerSupplyFailure NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricContentsContainerIndex,
+ jnxFabricContentsL1Index,
+ jnxFabricContentsL2Index,
+ jnxFabricContentsL3Index,
+ jnxFabricContentsDescr,
+ jnxFabricOperatingState }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricPowerSupplyFailure trap signifies that
+ the SNMP entity, acting in an agent role, has
+ detected that the specified power supply in the
+ chassis has been in the failure (bad DC output)
+ condition."
+ ::= { jnxFabricChassisTraps 1 }
+
+ jnxFabricFanFailure NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricContentsContainerIndex,
+ jnxFabricContentsL1Index,
+ jnxFabricContentsL2Index,
+ jnxFabricContentsL3Index,
+ jnxFabricContentsDescr,
+ jnxFabricOperatingState }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFanFailure trap signifies that the SNMP
+ entity, acting in an agent role, has detected
+ that the specified cooling fan or impeller in
+ the chassis has been in the failure (not spinning)
+ condition."
+ ::= { jnxFabricChassisTraps 2 }
+
+ jnxFabricOverTemperature NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricContentsContainerIndex,
+ jnxFabricContentsL1Index,
+ jnxFabricContentsL2Index,
+ jnxFabricContentsL3Index,
+ jnxFabricContentsDescr,
+ jnxFabricOperatingTemp }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricOverTemperature trap signifies that the
+ SNMP entity, acting in an agent role, has
+ detected that the specified hardware component
+ in the chassis has experienced over temperature
+ condition."
+ ::= { jnxFabricChassisTraps 3 }
+
+ jnxFabricRedundancySwitchover NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricRedundancyContentsIndex,
+ jnxFabricRedundancyL1Index,
+ jnxFabricRedundancyL2Index,
+ jnxFabricRedundancyL3Index,
+ jnxFabricRedundancyDescr,
+ jnxFabricRedundancyConfig,
+ jnxFabricRedundancyState,
+ jnxFabricRedundancySwitchoverCount,
+ jnxFabricRedundancySwitchoverTime,
+ jnxFabricRedundancySwitchoverReason }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricRedundancySwitchover trap signifies that
+ the SNMP entity, acting in an agent role, has
+ detected that the specified hardware component
+ in the chassis has experienced a redundancy
+ switchover event defined as a change in state
+ of jnxFabricRedundancyState from master to backup or
+ vice versa."
+ ::= { jnxFabricChassisTraps 4 }
+
+ jnxFabricFruRemoval NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFruRemoval trap signifies that the SNMP
+ entity, acting in an agent role, has detected
+ that the specified FRU (Field Replaceable Unit)
+ has been removed from the chassis."
+ ::= { jnxFabricChassisTraps 5 }
+
+ jnxFabricFruInsertion NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFruInsertion trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified FRU (Field Replaceable Unit) has been
+ inserted into the chassis."
+ ::= { jnxFabricChassisTraps 6 }
+
+ jnxFabricFruPowerOff NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot,
+ jnxFabricFruOfflineReason,
+ jnxFabricFruLastPowerOff,
+ jnxFabricFruLastPowerOn }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFruPowerOff trap signifies that the SNMP
+ entity, acting in an agent role, has detected
+ that the specified FRU (Field Replaceable Unit)
+ has been powered off in the chassis."
+ ::= { jnxFabricChassisTraps 7 }
+
+ jnxFabricFruPowerOn NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot,
+ jnxFabricFruOfflineReason,
+ jnxFabricFruLastPowerOff,
+ jnxFabricFruLastPowerOn }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFruPowerOn trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified FRU (Field Replaceable Unit) has been
+ powered on in the chassis."
+ ::= { jnxFabricChassisTraps 8 }
+
+ jnxFabricFruFailed NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "This indicates the specified FRU (Field Replaceable Unit)
+ has failed in the chassis. Most probably this is due toi
+ some hard error such as fru is not powering up or not
+ able to load ukernel. In these cases, fru is replaced."
+ ::= { jnxFabricChassisTraps 9 }
+
+ jnxFabricFruOffline NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot,
+ jnxFabricFruOfflineReason,
+ jnxFabricFruLastPowerOff,
+ jnxFabricFruLastPowerOn }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFruOffline trap signifies that the SNMP
+ entity, acting in an agent role, has detected
+ that the specified FRU (Field Replaceable Unit)
+ has gone offline in the chassis."
+ ::= { jnxFabricChassisTraps 10 }
+
+ jnxFabricFruOnline NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFruOnline trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified FRU (Field Replaceable Unit) has
+ gone online in the chassis."
+ ::= { jnxFabricChassisTraps 11 }
+
+ jnxFabricFruCheck NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFruCheck trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified FRU (Field Replaceable Unit) has
+ encountered some operational errors and gone into
+ check state in the chassis."
+ ::= { jnxFabricChassisTraps 12 }
+
+ jnxFabricFEBSwitchover NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFEBSwitchover trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified FEB (Forwarding Engine Board) has
+ switched over."
+ ::= { jnxFabricChassisTraps 13 }
+
+
+ jnxFabricHardDiskFailed NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxHardDiskFailed trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the Disk in the specified Routing Engine has
+ encountered some operational errors and gone into
+ failed state in the chassis."
+ ::= { jnxFabricChassisTraps 14 }
+
+ jnxFabricHardDiskMissing NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A DiskMissing trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ hard disk in the specified outing Engine is missing
+ from boot device list."
+ ::= { jnxFabricChassisTraps 15 }
+
+ jnxFabricBootFromBackup NOTIFICATION-TYPE
+ OBJECTS { jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxBootFromBackup trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified routing-engine/member has booted from
+ the back up root partition"
+ ::= { jnxFabricChassisTraps 16 }
+
+
+ jnxFabricHighPower NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricContentsContainerIndex,
+ jnxFabricContentsL1Index,
+ jnxFabricContentsL2Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricHighPowerConsumption trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified fabric ASIC consumes more power than
+ expected"
+ ::= { jnxFabricChassisTraps 17 }
+
+ -- Traps for chassis alarm cleared conditions
+
+ jnxFabricPowerSupplyOK NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricContentsContainerIndex,
+ jnxFabricContentsL1Index,
+ jnxFabricContentsL2Index,
+ jnxFabricContentsL3Index,
+ jnxFabricContentsDescr,
+ jnxFabricOperatingState }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricPowerSupplyOK trap signifies that the
+ SNMP entity, acting in an agent role, has
+ detected that the specified power supply in the
+ chassis has recovered from the failure (bad DC output)
+ condition."
+ ::= { jnxFabricChassisOKTraps 1 }
+
+ jnxFabricFanOK NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricContentsContainerIndex,
+ jnxFabricContentsL1Index,
+ jnxFabricContentsL2Index,
+ jnxFabricContentsL3Index,
+ jnxFabricContentsDescr,
+ jnxFabricOperatingState }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFanOK trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified cooling fan or impeller in the chassis
+ has recovered from the failure (not spinning) condition."
+ ::= { jnxFabricChassisOKTraps 2 }
+
+ jnxFabricTemperatureOK NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricContentsContainerIndex,
+ jnxFabricContentsL1Index,
+ jnxFabricContentsL2Index,
+ jnxFabricContentsL3Index,
+ jnxFabricContentsDescr,
+ jnxFabricOperatingTemp }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricTemperatureOK trap signifies that the
+ SNMP entity, acting in an agent role, has
+ detected that the specified hardware component
+ in the chassis has recovered from over temperature
+ condition."
+ ::= { jnxFabricChassisOKTraps 3 }
+
+ jnxFabricFruOK NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricFruContentsIndex,
+ jnxFabricFruL1Index,
+ jnxFabricFruL2Index,
+ jnxFabricFruL3Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricFabricFruOK trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified FRU (Field Replaceable Unit) has
+ recovered from previous operational errors and it
+ is in ok state in the chassis."
+ ::= { jnxFabricChassisOKTraps 4 }
+
+ jnxFabricHighPowerCleared NOTIFICATION-TYPE
+ OBJECTS { jnxFabricDeviceIndex,
+ jnxFabricContentsContainerIndex,
+ jnxFabricContentsL1Index,
+ jnxFabricContentsL2Index,
+ jnxFabricFruName,
+ jnxFabricFruType,
+ jnxFabricFruSlot }
+ STATUS current
+ DESCRIPTION
+ "A jnxFabricHighPowerCleared trap signifies that the SNMP
+ entity, acting in an agent role, has detected that
+ the specified fabric ASIC has cleared its high power condition"
+ ::= { jnxFabricChassisOKTraps 5 }
+END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 15:06:54 +0000