diff options
Diffstat (limited to 'MIBS/junos/JUNIPER-FABRIC-MIB')
| -rw-r--r-- | MIBS/junos/JUNIPER-FABRIC-MIB | 306 |
1 files changed, 306 insertions, 0 deletions
diff --git a/MIBS/junos/JUNIPER-FABRIC-MIB b/MIBS/junos/JUNIPER-FABRIC-MIB new file mode 100644 index 0000000..8e98381 --- /dev/null +++ b/MIBS/junos/JUNIPER-FABRIC-MIB @@ -0,0 +1,306 @@ +-- +-- Juniper Enterprise Specific MIB: Fabric MIB +-- +-- Copyright (c) 2012, Juniper Networks, Inc. +-- All rights reserved. +-- + +JUNIPER-FABRIC-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32, Counter64 + FROM SNMPv2-SMI + + CounterBasedGauge64 + FROM HCNUM-TC + + TEXTUAL-CONVENTION + FROM SNMPv2-TC + + jnxFabricMibRoot + FROM JUNIPER-SMI; + +jnxFabricMib MODULE-IDENTITY + + LAST-UPDATED "201410090000Z" + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Technical Assistance Center + Juniper Networks, Inc. + 1133 Innovation Way + Sunnyvale, CA 94089 + E-mail: support@juniper.net" + + DESCRIPTION + "The MIB modules representing Juniper Networks + fabric Manager" + + REVISION + "201410090000Z" -- 09-Oct-14 + DESCRIPTION + "Initial" + + ::= { jnxFabricMibRoot 1 } + +jnxFabricMibObjects OBJECT IDENTIFIER ::= { jnxFabricMib 1 } + +-- +-- Textual Conventions +-- + +JnxFabricType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value representing fabric statistics source or destination type. + + switch-fabric(1) Indicates switch-fabric + linecard(2) Indicates linecard" + REFERENCE "" + SYNTAX INTEGER { + switch-fabric(1), + linecard(2) + } + +JnxFabricStatisticsPriority ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value representing fabric statisitcs priority, if applicable. + + high(0) Indicates high priority + low(1) Indicates low priority + all(255) Indicates no specific priority" + REFERENCE "" + SYNTAX INTEGER { + high(0), + low(1), + all(255) + } + +-- Juniper Fabric Manager MIB +-- + +-- +-- Fabric Statistics Table +-- + +jnxFabricStatistics OBJECT IDENTIFIER ::= { jnxFabricMibObjects 1 } + +jnxFabricSourceStatisticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxFabricSourceStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of fabric statistics entries based on the source of statistics." + ::= { jnxFabricStatistics 1 } + + jnxFabricSourceStatisticsEntry OBJECT-TYPE + SYNTAX JnxFabricSourceStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of fabric source statistics table." + INDEX { jnxFabricSourceType, + jnxFabricSourceSlot, + jnxFabricSourcePfe, + jnxFabricDestinationType, + jnxFabricDestinationSlot, + jnxFabricDestinationPfe, + jnxFabricSourceStatisticsPriority} + ::= { jnxFabricSourceStatisticsTable 1 } + + JnxFabricSourceStatisticsEntry ::= SEQUENCE { + jnxFabricSourceType JnxFabricType, + jnxFabricSourceSlot Integer32, + jnxFabricSourcePfe Integer32, + jnxFabricDestinationType JnxFabricType, + jnxFabricDestinationSlot Integer32, + jnxFabricDestinationPfe Integer32, + jnxFabricSourceStatisticsPriority JnxFabricStatisticsPriority, + jnxFabricSourceStatisticsPackets Counter64, + jnxFabricSourceStatisticsBytes Counter64, + jnxFabricSourceStatisticsPps CounterBasedGauge64, + jnxFabricSourceStatisticsBps CounterBasedGauge64, + jnxFabricSourceStatisticsDropPackets Counter64, + jnxFabricSourceStatisticsDropBytes Counter64, + jnxFabricSourceStatisticsDropPps CounterBasedGauge64, + jnxFabricSourceStatisticsDropBps CounterBasedGauge64, + jnxFabricSourceStatisticsQueueDepthAverage CounterBasedGauge64, + jnxFabricSourceStatisticsQueueDepthCurrent CounterBasedGauge64, + jnxFabricSourceStatisticsQueueDepthPeak CounterBasedGauge64, + jnxFabricSourceStatisticsQueueDepthMaximum CounterBasedGauge64, + jnxFabricSourceStatisticsErrorPackets Counter64, + jnxFabricSourceStatisticsErrorPps CounterBasedGauge64 + } + + + jnxFabricSourceType OBJECT-TYPE + SYNTAX JnxFabricType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Source fabric type." + ::= { jnxFabricSourceStatisticsEntry 1 } + + jnxFabricSourceSlot OBJECT-TYPE + SYNTAX Integer32 (0..1023 | 65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Denotes plane number for switch-fabric / slot number for linecard. If there is no per plane statistics available, then it shall be 65535." + ::= { jnxFabricSourceStatisticsEntry 2 } + + jnxFabricSourcePfe OBJECT-TYPE + SYNTAX Integer32 (0..8191 | 65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Denotes pfe number. It is applicable only when source type is linecard and shall be 65535 for switch-fabric." + ::= { jnxFabricSourceStatisticsEntry 3 } + + jnxFabricDestinationType OBJECT-TYPE + SYNTAX JnxFabricType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Destination fabric type." + ::= { jnxFabricSourceStatisticsEntry 4 } + + jnxFabricDestinationSlot OBJECT-TYPE + SYNTAX Integer32 (0..1023 | 65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Denotes plane number for switch-fabric / slot number for linecard. If there is no per plane statistics available, then it shall be 65535." + ::= { jnxFabricSourceStatisticsEntry 5 } + + jnxFabricDestinationPfe OBJECT-TYPE + SYNTAX Integer32 (0..8191 | 65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Denotes pfe number. It is applicable only when destination type is linecard and shall be 65535 for switch-fabric." + ::= { jnxFabricSourceStatisticsEntry 6 } + + jnxFabricSourceStatisticsPriority OBJECT-TYPE + SYNTAX JnxFabricStatisticsPriority + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Statistics priority." + ::= { jnxFabricSourceStatisticsEntry 7 } + + jnxFabricSourceStatisticsPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets transmitted for a source." + ::= { jnxFabricSourceStatisticsEntry 8 } + + jnxFabricSourceStatisticsBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bytes transmitted for a source." + ::= { jnxFabricSourceStatisticsEntry 9 } + + jnxFabricSourceStatisticsPps OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rate of transmission in packets per second for a source." + ::= { jnxFabricSourceStatisticsEntry 10 } + + jnxFabricSourceStatisticsBps OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rate of transmission in bytes per second for a source." + ::= { jnxFabricSourceStatisticsEntry 11 } + + jnxFabricSourceStatisticsDropPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets dropped for a source." + ::= { jnxFabricSourceStatisticsEntry 12 } + + jnxFabricSourceStatisticsDropBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bytes dropped for a source." + ::= { jnxFabricSourceStatisticsEntry 13 } + + jnxFabricSourceStatisticsDropPps OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Drop rate in packets per second for a source." + ::= { jnxFabricSourceStatisticsEntry 14 } + + jnxFabricSourceStatisticsDropBps OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Drop rate in bytes per second for a source." + ::= { jnxFabricSourceStatisticsEntry 15 } + + jnxFabricSourceStatisticsQueueDepthAverage OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average queue depth, if applicable for a source type. Else it shall be 0." + ::= { jnxFabricSourceStatisticsEntry 16 } + + jnxFabricSourceStatisticsQueueDepthCurrent OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current queue depth, if applicable for a source type. Else it shall be 0." + ::= { jnxFabricSourceStatisticsEntry 17 } + + jnxFabricSourceStatisticsQueueDepthPeak OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Peak queue depth, if applicable for a source type. Else it shall be 0." + ::= { jnxFabricSourceStatisticsEntry 18 } + + jnxFabricSourceStatisticsQueueDepthMaximum OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum queue depth, if applicable for a source type. Else it shall be 0." + ::= { jnxFabricSourceStatisticsEntry 19 } + + jnxFabricSourceStatisticsErrorPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of errror packets for a source." + ::= { jnxFabricSourceStatisticsEntry 20 } + + jnxFabricSourceStatisticsErrorPps OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Error rate in packets per second for a source." + ::= { jnxFabricSourceStatisticsEntry 21 } + +END + |