diff options
Diffstat (limited to 'MIBS/junos/JUNIPER-L2ALD-MIB')
| -rw-r--r-- | MIBS/junos/JUNIPER-L2ALD-MIB | 573 |
1 files changed, 573 insertions, 0 deletions
diff --git a/MIBS/junos/JUNIPER-L2ALD-MIB b/MIBS/junos/JUNIPER-L2ALD-MIB new file mode 100644 index 0000000..87cee0a --- /dev/null +++ b/MIBS/junos/JUNIPER-L2ALD-MIB @@ -0,0 +1,573 @@ +-- +-- Juniper Enterprise Specific MIB: Structure of Management Information +-- +-- Copyright (c) 2002-2013, Juniper Networks, Inc. +-- All rights reserved. +-- +-- The contents of this document are subject to change without notice. +-- + + +JUNIPER-L2ALD-MIB DEFINITIONS ::= BEGIN + IMPORTS + MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE, Unsigned32, Counter64, TimeTicks, Integer32 + FROM SNMPv2-SMI + DisplayString, TruthValue + FROM SNMPv2-TC + ifIndex, ifDescr + FROM IF-MIB + jnxl2aldMibRoot + FROM JUNIPER-SMI + ; + + jnxl2aldMib MODULE-IDENTITY + LAST-UPDATED "201605310000Z" -- Tue May 31 00:00:00 2016 UTC + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Technical Assistance Center + Juniper Networks, Inc. + 1133 Innovation Way + Sunnyvale, CA 94089 + E-mail: support@juniper.net" + DESCRIPTION + "The MIB modules for L2ALD traps" + + -- Revision history + REVISION "201501221000Z" -- Thursday January 22 10:00:00 2015 UTC + DESCRIPTION + "Added a new field jnxL2aldVlanFdbId to the table jnxL2aldVlanTable" + + REVISION "201501141000Z" -- Wednesday January 14 10:00:00 2015 UTC + DESCRIPTION + "Added new table jnxL2aldVlanTable" + + REVISION "201208081000Z" -- Wednesday August 08 10:00:00 2012 UTC + DESCRIPTION + "Added new notification jnxl2aldMacMoveThreshold" + + REVISION "200702151000Z" -- Thursday February 15 10:00:00 2007 UTC + DESCRIPTION + "Initial Version" + + REVISION "201605310000Z" -- 31-May-16 + DESCRIPTION + "Corrected type" + + ::= { jnxl2aldMibRoot 1 } + + jnxl2aldNotification OBJECT IDENTIFIER ::= { jnxl2aldMib 0 } + + jnxl2aldObjects OBJECT IDENTIFIER ::= { jnxl2aldMib 1 } + + jnxl2aldInterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF Jnxl2aldEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "L2ALD objects for interface MAC limit." + ::= { jnxl2aldObjects 1 } + + jnxl2aldEntry OBJECT-TYPE + SYNTAX Jnxl2aldEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in l2aldInterfaceTable." + INDEX { ifIndex } + ::= { jnxl2aldInterfaceTable 1 } + + Jnxl2aldEntry ::= + SEQUENCE { + jnxl2aldIntfLogicalRouter DisplayString, + jnxl2aldIntfRoutingInst DisplayString, + jnxl2aldIntfBridgeDomain DisplayString, + jnxl2aldIntfMacLimit Unsigned32, + jnxl2aldIntfMacPinningIntf DisplayString, + jnxl2aldIntfDiscardIntf DisplayString + } + +-- Entry definitions for the table above + + jnxl2aldIntfLogicalRouter OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The logical router string for interface table." + ::= { jnxl2aldEntry 1 } + + jnxl2aldIntfRoutingInst OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The routing instance string for interface table." + ::= { jnxl2aldEntry 2 } + + jnxl2aldIntfBridgeDomain OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The bridge domain string for interface table." + ::= { jnxl2aldEntry 3 } + + jnxl2aldIntfMacLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The MAC limit count for the interface table." + ::= { jnxl2aldEntry 4 } + + jnxl2aldIntfMacPinningIntf OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The interface on which MAC Pinning is enabled." + ::= { jnxl2aldEntry 5 } + + jnxl2aldIntfDiscardIntf OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The interface on which MAC is discarded due to MAC Pinning." + ::= { jnxl2aldEntry 6 } + + +-- Objects defined below are scalar and for a different trap +-- they are different then the table definitions above + + jnxl2aldRoutingInst OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The Routing instance string for routing mac limit trap." + ::= { jnxl2aldObjects 2 } + + jnxl2aldBridgeDomain OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The bridge domain string for routing mac limit trap." + ::= { jnxl2aldObjects 3 } + + jnxl2aldLogicalRouter OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The logical router string for routing mac limit trap." + ::= { jnxl2aldObjects 4 } + + jnxl2aldMacLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The mac limit count for routing instance." + ::= { jnxl2aldObjects 5 } + + jnxl2aldGbMacLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The mac limit count for the system." + ::= { jnxl2aldObjects 6 } + + jnxl2aldMacAdress OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The offending mac causing mac move threshold trap." + ::= { jnxl2aldObjects 7 } + +---------------------------------------------------------------------------- +-- Juniper MAC Notification MIB object definitions +---------------------------------------------------------------------------- + + jnxL2aldMacNotificationMIBObjects OBJECT IDENTIFIER + ::= {jnxl2aldMib 2 } + + jnxL2aldMacNotificationMIBGlobalObjects OBJECT IDENTIFIER + ::= {jnxL2aldMacNotificationMIBObjects 1 } + +-- Juniper Mac Notification Global Group + +jnxL2aldMacGlobalFeatureEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether the MAC notification feature is currently + running in the device. + + Setting this object to false(2) disables the MAC notification + feature globally. + + Setting this object to true(1) will start the MAC notification + feature running in the device. If the feature is already + running, setting to true(1) has no effect." + ::= { jnxL2aldMacNotificationMIBGlobalObjects 1 } + +jnxL2aldMacNotificationInterval OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the maximum interval of time between + jnxL2aldMacChangedNotifications being generated by the device. + If the value of jnxNotificationsEnabled is true(1), the + device will send out the generated jnxL2aldMacChangedNotifications + and archive the MAC change notification events in the + jnxMacHistoryTable. If the value of jnxNotificationEnabled is + false(2), the device will not send out the generated + jnxL2aldMacChangedNotifications but it will archive these events + in the jnxMacHistoryTable. + + If the value of this object is equal to 0, the device will + generate jnxL2aldMacChangedNotifications and archive the MAC + change notification events in the jnxMacHistoryTable as soon as + there is MAC address learnt or removed by the device. + + If the value of this object is greater than 0, the device will + wait for a period of time equal to the value of this object + before generate the jnxL2aldMacChangedNotifications and archive + the MAC change notification events in the jnxMacHistoryTable." + DEFVAL { 30 } + ::= { jnxL2aldMacNotificationMIBGlobalObjects 2 } + +jnxL2aldMacAddressesLearnt OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of MAC addresses learnt by the + device." + ::= { jnxL2aldMacNotificationMIBGlobalObjects 3 } + +jnxL2aldMacAddressesRemoved OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of MAC addresses removed from the + forwarding database." + ::= { jnxL2aldMacNotificationMIBGlobalObjects 4 } + +jnxL2aldMacNotificationsEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether jnxL2aldMacChangedNotification notifications + will or will not be sent when there are MAC addresses + learnt or removed from the device's forwarding database. + Disabling notifications does not prevent the MAC address + info from being added to the jnxMacHistoryTable." + DEFVAL { false } + ::= { jnxL2aldMacNotificationMIBGlobalObjects 5 } + +jnxL2aldMacNotificationsSent OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of jnxl2aldMacChangedNotifications sent out + by the device." + ::= { jnxL2aldMacNotificationMIBGlobalObjects 6 } + +jnxL2aldMacHistTableMaxLength OBJECT-TYPE + SYNTAX Unsigned32 (0..500) + UNITS "entries" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The upper limit on the number of entries that the + jnxMacHistoryTable may contain. A value of 0 will + prevent any history from being retained. When this + table is full, the oldest entry will be deleted and + a new one will be created." + DEFVAL { 256 } + ::= { jnxL2aldMacNotificationMIBGlobalObjects 7 } + +jnxL2aldMacHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxL2aldMacHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table will archive the MAC change notification events + generated by this device. The MAC change notification + events are archived here even if jnxMacChangesNotifications + are not actually sent." + ::= { jnxL2aldMacNotificationMIBGlobalObjects 8 } + +jnxL2aldMacHistoryEntry OBJECT-TYPE + SYNTAX JnxL2aldMacHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A MAC change notification message that was previously + generated by this device. Each entry is indexed by a message + index." + INDEX { jnxL2aldHistIndex } + ::= { jnxL2aldMacHistoryTable 1 } + +JnxL2aldMacHistoryEntry ::= + SEQUENCE { + jnxL2aldHistIndex + Unsigned32, + jnxL2aldHistMacChangedMsg + OCTET STRING, + jnxL2aldHistTimestamp + TimeTicks + } + +jnxL2aldHistIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index that uniquely identifies a MAC change notification + event previously generated by the device. This index starts at + 1 and increases by one when a MAC change notification is + generated. When it reaches the maximum value, the agent wraps + the value back to 1." + ::= { jnxL2aldMacHistoryEntry 1 } + +jnxL2aldHistMacChangedMsg OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1..512)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the information of a MAC change + notification event. It consists of several tuples packed + together in the format of '<tuple1><tuple2>...'. + + Each tuple consist of 13 octets in the format of + '<operation><VLAN INDEX><MAC><dot1dBasePort><VLAN TAG>' where + + <operation> is of size 1 octet and supports the following values + 0 - End of MIB object. + 1 - MAC learnt. + 2 - MAC removed. + 3 - MAC updated. + + <VLAN INDEX> is the index of the VLAN which the MAC address is + belonged to and has size of 2 octet. + + <MAC> is the Layer2 Mac Address and has size of 6 octets. + + <dot1dBasePort> is the value of dot1dBasePort for the + interface from which the MAC address is learnt and has size + of 2 octets. + + <VLAN TAG> is the tag of the VLAN which the MAC address is + belonged to and has size of 2 octet." + + ::= { jnxL2aldMacHistoryEntry 2 } + +jnxL2aldHistTimestamp OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the jnxL2aldMacChangedNotification + containing the information denoted by the jnxHistMacChangedMsg + object in this entry was generated." + ::= { jnxL2aldMacHistoryEntry 3 } + +jnxL2aldMacAddressesUpdated OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of MAC addresses updated by the + device." + ::= { jnxL2aldMacNotificationMIBGlobalObjects 9 } + +------------------------------------------------------------------------------------------ +-- Juniper Vlan MIB Definitions +------------------------------------------------------------------------------------------ + + jnxL2aldVlanMIBObjects OBJECT IDENTIFIER + ::= {jnxl2aldMib 3 } + +-- VLAN Configuration + +jnxL2aldVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxL2aldVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of VLAN names and characteristics." + ::= { jnxL2aldVlanMIBObjects 1 } + +jnxL2aldVlanEntry OBJECT-TYPE + SYNTAX JnxL2aldVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table entry containing VLAN names and characteristics." + INDEX { jnxL2aldVlanID } + ::= { jnxL2aldVlanTable 1 } + +JnxL2aldVlanEntry ::= + SEQUENCE { + jnxL2aldVlanID Unsigned32, + jnxL2aldVlanName DisplayString, + jnxL2aldVlanTag Integer32, + jnxL2aldVlanType INTEGER, + jnxL2aldVlanFdbId Unsigned32 + } + +jnxL2aldVlanID OBJECT-TYPE + SYNTAX Unsigned32(1..4094) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is the locally significant ID that is used internally by this + device to reference this VLAN." + ::= { jnxL2aldVlanEntry 1 } + +jnxL2aldVlanName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vlan name is the textual name and this is the identifier + that the user of a configuration utility will use." + ::= { jnxL2aldVlanEntry 2 } + +jnxL2aldVlanTag OBJECT-TYPE + SYNTAX Integer32(1..4094) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the locally significant ID that is used internally by this + device to reference this VLAN." + ::= { jnxL2aldVlanEntry 3 } + +jnxL2aldVlanType OBJECT-TYPE + SYNTAX INTEGER { + static (1), + dynamic(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vlan type can be + Static (1) + Dynamic(2)" + DEFVAL { 1 } + ::= { jnxL2aldVlanEntry 4 } + +jnxL2aldVlanFdbId OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The identity of the Filtering Database dot1qFdbTable (A table that + contains configuration and control information for each Filtering + Database currently operating on this device)" + ::= { jnxL2aldVlanEntry 5 } + +------------------------------------------------------------------------------------------ +-- Trap definitions +------------------------------------------------------------------------------------------ + + jnxl2aldRoutingInstMacLimit NOTIFICATION-TYPE + OBJECTS { jnxl2aldLogicalRouter, + jnxl2aldRoutingInst, + jnxl2aldBridgeDomain, + jnxl2aldMacLimit + } + STATUS current + DESCRIPTION + "This notification is generated when the MAC limit for + given routing instance (jnxl2aldRoutingInst) is reached. + This trap is send only once we exceed the limit value." + ::= { jnxl2aldNotification 1 } + + jnxl2aldInterfaceMacLimit NOTIFICATION-TYPE + OBJECTS { jnxl2aldIntfLogicalRouter, + jnxl2aldIntfRoutingInst, + jnxl2aldIntfBridgeDomain, + ifDescr, + jnxl2aldIntfMacLimit + } + STATUS current + DESCRIPTION + "This notification is generated when the MAC limit for + the given physical interface (jnxl2aldInterfaceMacLimit) is reached. + This trap is send only once we exceed the limit value." + ::= { jnxl2aldNotification 2 } + + jnxl2aldGlobalMacLimit NOTIFICATION-TYPE + OBJECTS { jnxl2aldGbMacLimit + } + STATUS current + DESCRIPTION + "This notification is generated when the MAC limit for + the entire system is reached. + This trap is send only once we exceed the limit value." + ::= { jnxl2aldNotification 3 } + + jnxl2aldMacMoveThreshold NOTIFICATION-TYPE + OBJECTS { jnxl2aldIntfLogicalRouter, + jnxl2aldIntfRoutingInst, + jnxl2aldIntfBridgeDomain, + ifDescr, + jnxl2aldMacAdress + } + STATUS current + DESCRIPTION + "This notification is generated when a mac move reaches threshold. + The given interface (ifDescr) will be blocked for the Bridge + Domain(jnxl2aldIntfBridgeDomain). This trap is send only once when + mac move count exceeds the threshold for the Mac(jnxl2aldMacAdress)." + ::= { jnxl2aldNotification 4 } + + jnxL2aldMacChangedNotification NOTIFICATION-TYPE + OBJECTS { jnxL2aldHistMacChangedMsg, jnxL2aldHistTimestamp } + STATUS current + DESCRIPTION + "This notification is generated when there is enough MAC + address information to fully occupy a maximum size SNMP trap + message. This notification is also generated when there + is at least one MAC address changed or removed and the amount + of time elapsed from the previous notification is greater + than the maximum wait time denoted by + jnxNotificationInterval object. + + If there are more MAC addresses information than can fit into + one cmmHistTrapContent object, then multiple notifications + will be generated." + ::= { jnxl2aldNotification 5 } + + jnxl2aldMacPinningdiscard NOTIFICATION-TYPE + OBJECTS { jnxl2aldIntfLogicalRouter, + jnxl2aldIntfRoutingInst, + jnxl2aldIntfBridgeDomain, + jnxl2aldMacAdress, + jnxl2aldIntfMacPinningIntf, + jnxl2aldIntfDiscardIntf + } + STATUS current + DESCRIPTION + "This notification is generated for discarding packets in a bridge domain over an + IFL for MACs when learned over MAC pinning enabled interface and same MACs are + also seen over any other interfaces in the same bridge domain. + This trap is generated in configured interval of time when packets are discarded + over an IFL continuously." + ::= { jnxl2aldNotification 6 } + +END |