diff options
Diffstat (limited to 'MIBS/junos/JUNIPER-PFE-MIB')
| -rw-r--r-- | MIBS/junos/JUNIPER-PFE-MIB | 737 |
1 files changed, 737 insertions, 0 deletions
diff --git a/MIBS/junos/JUNIPER-PFE-MIB b/MIBS/junos/JUNIPER-PFE-MIB new file mode 100644 index 0000000..e09857b --- /dev/null +++ b/MIBS/junos/JUNIPER-PFE-MIB @@ -0,0 +1,737 @@ +-- +-- Juniper Enterprise Specific MIB: PFE MIB +-- +-- Copyright (c) 2006-2012, Juniper Networks, Inc. +-- All rights reserved. +-- +-- The contents of this document are subject to change without notice. +-- + +JUNIPER-PFE-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + Counter32, Counter64, Integer32 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DisplayString + FROM SNMPv2-TC + jnxPfeMibRoot + FROM JUNIPER-SMI; + +jnxPfeMib MODULE-IDENTITY + LAST-UPDATED "201605310000Z" -- Tue May 31 00:00:00 2016 UTC + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Technical Assistance Center + Juniper Networks, Inc. + 1133 Innovation Way + Sunnyvale, CA 94089 + E-mail: support@juniper.net" + + DESCRIPTION + "The MIB provides PFE specific data." + + REVISION "201411140000Z" + DESCRIPTION + "Added jnxPfeMemoryTrapVars and jnxPfeMemoryNotifications." + REVISION "201403120000Z" + DESCRIPTION + "Added new Table jnxPfeNotifyGlParAccSec which counts + notifications for the packets parsed/processed by + access-security." + REVISION "201109090000Z" + DESCRIPTION + "Added new Table jnxPfeMemoryErrorsTable which gives parity and + ecc errors. + Added new Trap pfeMemoryErrors" + REVISION "201002070000Z" + DESCRIPTION + "Added new notification types." + --REVISION "201001070000Z" + --DESCRIPTION + -- "Added new notification types." + --REVISION "200607240000Z" + --DESCRIPTION + -- "Initial revision." + + REVISION "201605310000Z" -- 31-May-16 + DESCRIPTION + "Corrected type in sequence and actual" + + ::= { jnxPfeMibRoot 1 } + + JnxPfeMemoryTypeEnum ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "PFE memory type, nh (1), fw (2), encap (3)" + SYNTAX INTEGER { nh(1), + fw(2), + encap(3)} + + -- + -- This branch contains all PFE Notification statistics data. + -- + jnxPfeNotification OBJECT IDENTIFIER ::= { jnxPfeMib 1 } + + + -- + -- This table provide global PFE notification stats for each PFE slot, + -- exposing the data provided by the 'show pfe statistics notification' + -- cli command. + -- + jnxPfeNotifyGlTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxPfeNotifyGlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides global PFE notification statistics." + ::= { jnxPfeNotification 1 } + + jnxPfeNotifyGlEntry OBJECT-TYPE + SYNTAX JnxPfeNotifyGlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { jnxPfeNotifyGlSlot } + ::= { jnxPfeNotifyGlTable 1 } + + JnxPfeNotifyGlEntry ::= + SEQUENCE { + jnxPfeNotifyGlSlot Integer32, + jnxPfeNotifyGlParsed Counter32, + jnxPfeNotifyGlAged Counter32, + jnxPfeNotifyGlCorrupt Counter32, + jnxPfeNotifyGlIllegal Counter32, + jnxPfeNotifyGlSample Counter32, + jnxPfeNotifyGlGiants Counter32, + jnxPfeNotifyGlTtlExceeded Counter32, + jnxPfeNotifyGlTtlExcErrors Counter32, + jnxPfeNotifyGlSvcOptAsp Counter32, + jnxPfeNotifyGlSvcOptRe Counter32, + jnxPfeNotifyGlPostSvcOptOut Counter32, + jnxPfeNotifyGlOptTtlExp Counter32, + jnxPfeNotifyGlDiscSample Counter32, + jnxPfeNotifyGlRateLimited Counter32, + jnxPfeNotifyGlPktGetFails Counter32, + jnxPfeNotifyGlDmaFails Counter32, + jnxPfeNotifyGlDmaTotals Counter32, + jnxPfeNotifyGlUnknowns Counter32, + jnxPfeNotifyGlParAccSec Counter32 + } + + jnxPfeNotifyGlSlot OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The PFE slot number for this set of global PFE notification + statistics." + ::= { jnxPfeNotifyGlEntry 1 } + + jnxPfeNotifyGlParsed OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications reported by the routing chip." + ::= { jnxPfeNotifyGlEntry 2 } + + jnxPfeNotifyGlAged OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications that are dropped due to the fact + that the they have been in the system for too long and + hence not valid anymore." + ::= { jnxPfeNotifyGlEntry 3 } + + jnxPfeNotifyGlCorrupt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications dropped due to the fact that they + have an invalid notification result format. This counter + is valid for Internet Processor-I and Internet Processor-II + only." + ::= { jnxPfeNotifyGlEntry 4 } + + jnxPfeNotifyGlIllegal OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications dropped due to the fact that they + have an illegal notification type." + ::= { jnxPfeNotifyGlEntry 5 } + + jnxPfeNotifyGlSample OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of sample notifications reported by the routing chip." + ::= { jnxPfeNotifyGlEntry 6 } + + jnxPfeNotifyGlGiants OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications dropped that are larger than the + supported DMA size." + ::= { jnxPfeNotifyGlEntry 7 } + + jnxPfeNotifyGlTtlExceeded OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of options/TTL-expired notifications that need to be + sent to service interfaces as transit packets. This counter + is valid for Internet Processor-I and Internet Processor-II + only." + ::= { jnxPfeNotifyGlEntry 8 } + + jnxPfeNotifyGlTtlExcErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of options/TTL-expired packet notifications that could + not be sent as transit packets because the output interface + could not be determined. This counter is valid for Internet + Processor-I and Internet Processor-II only." + ::= { jnxPfeNotifyGlEntry 9 } + + jnxPfeNotifyGlSvcOptAsp OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of IP options packets that are sent out to a Services + PIC." + ::= { jnxPfeNotifyGlEntry 10 } + + jnxPfeNotifyGlSvcOptRe OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of IP options packets that are sent out to the Routing + Engine." + ::= { jnxPfeNotifyGlEntry 11 } + + jnxPfeNotifyGlPostSvcOptOut OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications that were re-injected by the services + PIC after it had processed the associated packets. These + notifications now need to be forwarded out to their actual + destination. This counter is valid for Internet Processor-I + and Internet Processor-II only." + ::= { jnxPfeNotifyGlEntry 12 } + + jnxPfeNotifyGlOptTtlExp OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of TTL-expired transit packets." + ::= { jnxPfeNotifyGlEntry 13 } + + jnxPfeNotifyGlDiscSample OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of sample notifications that are dropped as they refer + to discarded packets in PFE." + ::= { jnxPfeNotifyGlEntry 14 } + + jnxPfeNotifyGlRateLimited OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications ignored because of PFE software + throttling." + ::= { jnxPfeNotifyGlEntry 15 } + + jnxPfeNotifyGlPktGetFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications where we could not allocate memory + for DMA." + ::= { jnxPfeNotifyGlEntry 16 } + + jnxPfeNotifyGlDmaFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications where the DMA of associated packets + failed for miscellaneous reasons. Valid for T-series Internet + Processor only." + ::= { jnxPfeNotifyGlEntry 17 } + + jnxPfeNotifyGlDmaTotals OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications for which the packet DMA completed. + Valid for T-series Internet Processor only." + ::= { jnxPfeNotifyGlEntry 18 } + + jnxPfeNotifyGlUnknowns OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications that could not be resolved to a known + next hop destination. Valid for T-series Internet Processor + only." + ::= { jnxPfeNotifyGlEntry 19 } + + jnxPfeNotifyGlParAccSec OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications for the packets parsed/processed by + access-security." + ::= { jnxPfeNotifyGlEntry 20 } + + -- + -- This table provides Type specific PFE notification stats for each PFE + -- slot, exposing the data provided by the 'show pfe statistics + -- notification' cli command. + -- + jnxPfeNotifyTypeTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxPfeNotifyTypeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This provides type-specific PFE notification stats" + ::= { jnxPfeNotification 2 } + + jnxPfeNotifyTypeEntry OBJECT-TYPE + SYNTAX JnxPfeNotifyTypeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { jnxPfeNotifyGlSlot, jnxPfeNotifyTypeId } + ::= { jnxPfeNotifyTypeTable 1 } + + JnxPfeNotifyTypeEntry ::= + SEQUENCE { + jnxPfeNotifyTypeId INTEGER, + jnxPfeNotifyTypeDescr DisplayString, + jnxPfeNotifyTypeParsed Counter32, + jnxPfeNotifyTypeInput Counter32, + jnxPfeNotifyTypeFailed Counter32, + jnxPfeNotifyTypeIgnored Counter32 + } + + jnxPfeNotifyTypeId OBJECT-TYPE + SYNTAX INTEGER { + illegal (1), + unclassified (2), + option (3), + nextHop (4), + discard (5), + sample (6), + redirect (7), + dontFragment (8), + cfdf (9), + poison (10), + unknown (11), + specialMemPkt (12), + autoConfig (13), + reject (14) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This identifies the PFE notification type for this row's stats. + Below is a description of each notification type: + 1. illegal Packets with invalid notification type. + + 2. unclassified Packets that did not have a key lookup + performed on them. + + 3. option Packets which have L3 options present. + + 4. nextHop Packets that are destined to the host. + + 5. discard Used when a discarded packet is sent to the + route processor. + + 6. sample Unused. + + 7. redirect This is used when a packet is being sent out + on the interface it came in on. + + 8. dontFragment This is used that a packet needs to be + fragmented but the DF (don't fragment) bit + is set. + + 9. cfdf When an MTU exceeded indication is + triggered by the CF chip and the packet has + DF (don't fragment) set. + + 10. poison Packets that resolved to a poisoned next + hop index. + + 11. unknown Packets of unknown notification type. + + 12. specialMemPkt Packets with special memory pkt type notification used in diagnostics. + + 13. autoconfig Packets with autoconfig PFE notification type used for dynamic VLANs. + + 14. reject Packets of reject PFE notification type." + ::= { jnxPfeNotifyTypeEntry 1 } + + jnxPfeNotifyTypeDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The description of the Pfe Notification type for this entry." + ::= { jnxPfeNotifyTypeEntry 2 } + + jnxPfeNotifyTypeParsed OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of successful parsing of notifications." + ::= { jnxPfeNotifyTypeEntry 3 } + + jnxPfeNotifyTypeInput OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications whose associated packets were DMA'ed + into route processor memory." + ::= { jnxPfeNotifyTypeEntry 4 } + + jnxPfeNotifyTypeFailed OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of failures in parsing the notifications." + ::= { jnxPfeNotifyTypeEntry 5 } + + jnxPfeNotifyTypeIgnored OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of notifications where the notification type in the + message does not match any of the valid types." + ::= { jnxPfeNotifyTypeEntry 6 } + + -- + -- This table provides error counters for each PFE + -- + jnxPfeMemoryErrorsTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxPfeMemoryErrorsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This provides PFE memory errors" + ::= { jnxPfeNotification 3 } + + jnxPfeMemoryErrorsEntry OBJECT-TYPE + SYNTAX JnxPfeMemoryErrorsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { jnxPfeFpcSlot, jnxPfeSlot } + ::= { jnxPfeMemoryErrorsTable 1 } + + JnxPfeMemoryErrorsEntry ::= + SEQUENCE { + jnxPfeFpcSlot Integer32, + jnxPfeSlot Integer32, + jnxPfeParityErrors Counter64, + jnxPfeEccErrors Counter64 + } + + jnxPfeFpcSlot OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The FPC slot number for this set of PFE notification" + ::= { jnxPfeMemoryErrorsEntry 1 } + + jnxPfeSlot OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The pfe slot number for this set of errors" + ::= { jnxPfeMemoryErrorsEntry 2 } + + jnxPfeParityErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The parity error count" + ::= { jnxPfeMemoryErrorsEntry 3 } + + jnxPfeEccErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ECC error count" + ::= { jnxPfeMemoryErrorsEntry 4 } + + +pfeMemoryErrorsNotificationPrefix OBJECT IDENTIFIER ::= { jnxPfeNotification 0 } + +pfeMemoryErrors NOTIFICATION-TYPE + OBJECTS { + jnxPfeParityErrors, + jnxPfeEccErrors + } + STATUS current + DESCRIPTION + "A pfeMemoryErrors notification is sent when the value + of jnxPfeParityErrors or jnxPfeEccErrors increases." + + ::= { pfeMemoryErrorsNotificationPrefix 1 } + +-- +-- This contains all PFE Memory statistics data. +-- +jnxPfeMemory OBJECT IDENTIFIER ::= { jnxPfeMib 2 } + +-- +-- This table provide global PFE Memory ASIC and Ukern stats for each PFE slot, +-- +jnxPfeMemoryUkernTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxPfeMemoryUkernEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides global PFE ukern memory statistics for +specified slot." + ::= { jnxPfeMemory 1 } + +jnxPfeMemoryUkernEntry OBJECT-TYPE + SYNTAX JnxPfeMemoryUkernEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry represent ukern memory percentage free." + INDEX { jnxPfeGlSlot } + ::= { jnxPfeMemoryUkernTable 1 } + +JnxPfeMemoryUkernEntry ::= + SEQUENCE { + jnxPfeGlSlot Unsigned32, + jnxPfeMemoryUkernFreePercent Unsigned32 + } + +jnxPfeMemoryUkernFreePercent OBJECT-TYPE + SYNTAX Unsigned32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The percent PFE ukern memory free within ukern heap." + ::= { jnxPfeMemoryUkernEntry 2 } +-- +-- This table provide global PFE NH (Trio) /JTREE Memory(I-Chip) and FW / +-- Filter and Encap (I-chip Iwo SRAM) memory stats for each PFE slot, +-- +jnxPfeMemoryForwardingTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxPfeMemoryForwardingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides PFE ASIC memory - NH/JTREE or FW/Filter or Encap + memory utilization statistics." + ::= { jnxPfeMemory 2 } + +jnxPfeMemoryForwardingEntry OBJECT-TYPE + SYNTAX JnxPfeMemoryForwardingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry represent ASIC memory free percent of a specific type + in specified pfe instance" + INDEX { jnxPfeGlSlot, jnxPfeMemoryForwardingChipSlot, jnxPfeMemoryType } + ::= { jnxPfeMemoryForwardingTable 1 } + +JnxPfeMemoryForwardingEntry ::= + SEQUENCE { + jnxPfeMemoryForwardingChipSlot Unsigned32, + jnxPfeMemoryType JnxPfeMemoryTypeEnum, + jnxPfeMemoryForwardingPercentFree Unsigned32 + } + +jnxPfeMemoryForwardingChipSlot OBJECT-TYPE + SYNTAX Unsigned32 (0..3) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ASIC instance number or pfe complex instance number." + ::= { jnxPfeMemoryForwardingEntry 1 } + +jnxPfeMemoryType OBJECT-TYPE + SYNTAX JnxPfeMemoryTypeEnum + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "PFE ASIC memory type, nh = 1, fw = 2, encap = 3." + ::= { jnxPfeMemoryForwardingEntry 2 } + +jnxPfeMemoryForwardingPercentFree OBJECT-TYPE + SYNTAX Unsigned32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Percentage ASIC memory free for a specific memory type. For Trio based linecards Encap memory is not available.Hence no value is returned" + ::= { jnxPfeMemoryForwardingEntry 3 } + +-- +-- PFE Memory Notification Variables/Objects +-- + jnxPfeMemoryTrapVars OBJECT-IDENTITY + STATUS current + DESCRIPTION + "PFE notification object definitions." + ::= { jnxPfeMemory 3 } + jnxPfeGlSlot OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Global slot number for line card resource monitoring." + ::= { jnxPfeMemoryTrapVars 1 } + + jnxPfeInstanceNumber OBJECT-TYPE + SYNTAX Integer32 (0..3) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "PFE instance number in pfe complex." + ::= { jnxPfeMemoryTrapVars 2 } + + jnxPfeMemoryThreshold OBJECT-TYPE + SYNTAX Unsigned32 (0..100) + UNITS "percent" + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Configured high memory utilization threshold." + ::= { jnxPfeMemoryTrapVars 3 } + +jnxPfeMemoryNotificationsPrefix OBJECT IDENTIFIER ::= { jnxPfeMemory 4 } +jnxPfeMemoryNotifications OBJECT IDENTIFIER ::= { jnxPfeMemoryNotificationsPrefix 0 } + +jnxPfeHeapMemoryThresholdExceeded NOTIFICATION-TYPE + OBJECTS { + jnxPfeGlSlot, + jnxPfeMemoryThreshold } + STATUS current + DESCRIPTION + "Indicates that the Heap Memory utilization has crossed the + configured watermark." + ::= { jnxPfeMemoryNotifications 1 } + +jnxPfeHeapMemoryThresholdAbated NOTIFICATION-TYPE + OBJECTS { + jnxPfeGlSlot, + jnxPfeMemoryThreshold } + STATUS current + DESCRIPTION + "Indicates that the Heap Memory utilization has fallen below the + configured watermark." + ::= { jnxPfeMemoryNotifications 2 } + +jnxPfeNextHopMemoryThresholdExceeded NOTIFICATION-TYPE + OBJECTS { + jnxPfeGlSlot, + jnxPfeInstanceNumber, + jnxPfeMemoryThreshold } + STATUS current + DESCRIPTION + "Indicates that the Next Hop Memory utilization has crossed the + configured watermark." + ::= { jnxPfeMemoryNotifications 3 } + +jnxPfeNextHopMemoryThresholdAbated NOTIFICATION-TYPE + OBJECTS { + jnxPfeGlSlot, + jnxPfeInstanceNumber, + jnxPfeMemoryThreshold } + STATUS current + DESCRIPTION + "Indicates that the Next Hop Memory utilization has fallen below the + configured watermark." + ::= { jnxPfeMemoryNotifications 4 } + +jnxPfeFilterMemoryThresholdExceeded NOTIFICATION-TYPE + OBJECTS { + jnxPfeGlSlot, + jnxPfeInstanceNumber, + jnxPfeMemoryThreshold } + STATUS current + DESCRIPTION + "Indicates that the Filter Memory utilization has crossed the + configured watermark." + ::= { jnxPfeMemoryNotifications 5 } + +jnxPfeFilterMemoryThresholdAbated NOTIFICATION-TYPE + OBJECTS { + jnxPfeGlSlot, + jnxPfeInstanceNumber, + jnxPfeMemoryThreshold } + STATUS current + DESCRIPTION + "Indicates that the Filter Memory utilization has fallen below the + configured watermark." + ::= { jnxPfeMemoryNotifications 6 } + +jnxPfeEncapMemoryThresholdExceeded NOTIFICATION-TYPE + OBJECTS { + jnxPfeGlSlot, + jnxPfeInstanceNumber, + jnxPfeMemoryThreshold } + STATUS current + DESCRIPTION + "Indicates that the ENCAP Memory utilization has crossed the + configured watermark." + ::= { jnxPfeMemoryNotifications 7 } + +jnxPfeEncapMemoryThresholdAbated NOTIFICATION-TYPE + OBJECTS { + jnxPfeGlSlot, + jnxPfeInstanceNumber, + jnxPfeMemoryThreshold } + STATUS current + DESCRIPTION + "Indicates that the ENCAP Memory utilization has fallen below the + configured watermark." + ::= { jnxPfeMemoryNotifications 8 } + +END |