diff options
Diffstat (limited to 'MIBS/junose/Juniper-ATM-CONF')
| -rw-r--r-- | MIBS/junose/Juniper-ATM-CONF | 1825 |
1 files changed, 1825 insertions, 0 deletions
diff --git a/MIBS/junose/Juniper-ATM-CONF b/MIBS/junose/Juniper-ATM-CONF new file mode 100644 index 0000000..296488c --- /dev/null +++ b/MIBS/junose/Juniper-ATM-CONF @@ -0,0 +1,1825 @@ + +-- ***************************************************************************** +-- Juniper-ATM-CONF +-- +-- SNMP Agent Capabilities definitions for the ATM MIBs. +-- +-- Copyright (c) 2001, 2002 Unisphere Networks, Inc. +-- Copyright (c) 2002-2005 Juniper Networks, Inc. +-- All rights reserved. +-- ***************************************************************************** + +Juniper-ATM-CONF DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY + FROM SNMPv2-SMI + AGENT-CAPABILITIES + FROM SNMPv2-CONF + juniAgents + FROM Juniper-Agents; + +juniAtmAgent MODULE-IDENTITY + LAST-UPDATED "200508171726Z" -- 17-Aug-05 01:26 PM EDT + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Networks, Inc. + Postal: 10 Technology Park Drive + Westford, MA 01886-3146 + USA + Tel: +1 978 589 5800 + E-mail: mib@Juniper.net" + DESCRIPTION + "Juniper-UNI-ATM-MIB: + The agent capabilities definitions for the ATM component of the SNMP + agent in the Juniper E-series family of products." + -- Revision History + REVISION "200508171726Z" -- 17-Aug-05 01:26 PM EDT - JUNOSe 7.3 + DESCRIPTION + "Juniper-UNI-ATM-MIB: + Removed SVC support. + ATM2-MIB: + Removed SVC support." + REVISION "200502172315Z" -- 17-Feb-05 06:15 PM EST - JUNOSe 7.1 + DESCRIPTION + "Juniper-UNI-ATM-MIB: + Added circuit OAM support to the ATM VCC end point agent capabilities." + REVISION "200401061953Z" -- 06-Jan-04 02:53 PM EST - JUNOSe 5.3 + DESCRIPTION + "Added support to export the subinterface description to the line + cards." + REVISION "200311071457Z" -- 07-Nov-03 09:57 AM EST - JUNOSe 5.2 + DESCRIPTION + "ATM2-MIB: + Updated from an Internet Draft to a Proposed Standard (RFC 3606). + Juniper-UNI-ATM-MIB: + Added ATM sub-interface location support." + REVISION "200305081757Z" -- 08-May-03 01:57 PM EDT - JUNOSe 5.1 + DESCRIPTION + "Juniper-UNI-ATM-MIB: + Added ATM F4 OAM circuits management and ATM VP description support." + REVISION "200209061654Z" -- 06-Sep-02 12:54 PM EDT - JUNOSe 5.0 + DESCRIPTION + "Juniper-UNI-ATM-MIB: + Replaced Unisphere names with Juniper names." + REVISION "200208091415Z" -- 09-Aug-02 10:15 AM EDT - JUNOSe 4.1 + DESCRIPTION + "ATM2-MIB: + Added support for the atmSigStatTable, the atmAal5VclStatTable and the + atmInterfaceExtTable. + Juniper-UNI-ATM-MIB: + Added receive bandwith support to CAC. + Added E164 public addressing support." + REVISION "200201291518Z" -- 29-Jan-02 10:18 AM EST - JUNOSe 4.0 + DESCRIPTION + "Juniper-UNI-ATM-MIB: + Added ATM switched virtual connection (SVC) support to the VCC end + point capabilities." + REVISION "200201241416Z" -- 24-Jan-02 09:16 AM EST - JUNOSe 3.4 + DESCRIPTION + "Juniper-UNI-ATM-MIB: + Added support for ATM connection admission control (CAC) to the VCC end + point capabilities." + REVISION "200112141951Z" -- 14-Dec-01 02:51 PM EST - JUNOSe 3.3 + DESCRIPTION + "Juniper-UNI-ATM-MIB: + Added ATM traffic shaping capabilities." + REVISION "200105231612Z" -- 23-May-01 12:12 PM EDT - JUNOSe 3.2 + DESCRIPTION + "The initial release of this management information module." + ::= { juniAgents 3 } + + +-- ***************************************************************************** +-- ATM VCC end point agent capabilities +-- ***************************************************************************** +juniAtmVccEndPointAgent OBJECT IDENTIFIER ::= { juniAtmAgent 1 } + +juniAtmVccEndPointAgentV1 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 1 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent was + supported in JUNOSe 3.0 and 3.1 system releases." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. + These capabilities became obsolete when new objects were added to the + juniAtmSubIfGroup and support for the atmfM4IfLoopbackLocationCode + object was added." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup, + juniAtmAal5Group, + juniAtmSubIfGroup } + ::= { juniAtmVccEndPointAgent 1 } + +juniAtmVccEndPointAgentV2 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 2 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent was + supported in JUNOSe 3.2 and JUNOSe 3.3 system releases." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. + These capabilities became obsolete when support was added to the + Juniper-UNI-ATM-MIB for connection admission control (CAC)." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup2, + juniAtmAal5Group, + juniAtmSubIfGroup2, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup } + ::= { juniAtmVccEndPointAgent 2 } + +juniAtmVccEndPointAgentV3 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 3 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent was + supported in JUNOSe 3.4 and subsequent 3.x system releases." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. + These capabilities became obsolete when support was added to the + Juniper-UNI-ATM-MIB for switched virtual connection (SVC)." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup3, + juniAtmAal5Group, + juniAtmSubIfGroup2, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup } + ::= { juniAtmVccEndPointAgent 3 } + +juniAtmVccEndPointAgentV4 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 4 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent was + supported in JUNOSe 4.0 system releases." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. + These capabilitie became obsolete when CAC recieve bandwith and E164 + public addressing objects were added." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM2-MIB + INCLUDES { + atmCommonGroup, + atmHostGroup } + VARIATION atmVplLogicalPortDef + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmVplLogicalPortIndex + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmCurrentlyFailingPVplTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVplTable is not supported." + VARIATION atmCurrentlyFailingPVclTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVclTable is not supported." + VARIATION atmVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmVclAddrRowStatus + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmAddrVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmAddrVclTable is not supported." + VARIATION atmVclGenSigDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmVclGenTable is not supported." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup4, + juniAtmAal5Group, + juniAtmSubIfGroup3, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup, + juniAtmSvcGroup } + ::= { juniAtmVccEndPointAgent 4 } + +juniAtmVccEndPointAgentV5 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 5 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent was + supported in JUNOSe 4.1 thru 5.0 system releases." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. + These capabilitie became obsolete when F4 flow OAM circuits and ATM VP + description objects were added to the Juniper-UNI-ATM-MIB." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM2-MIB + INCLUDES { + atmCommonGroup, + atmHostGroup } + VARIATION atmVplLogicalPortDef + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmVplLogicalPortIndex + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmCurrentlyFailingPVplTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVplTable is not supported." + VARIATION atmCurrentlyFailingPVclTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVclTable is not supported." + VARIATION atmVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmVclAddrRowStatus + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmAddrVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmAddrVclTable is not supported." + VARIATION atmVclGenSigDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmVclGenTable is not supported." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup5, + juniAtmAal5Group, + juniAtmSubIfGroup4, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup, + juniAtmSvcGroup2 } + ::= { juniAtmVccEndPointAgent 5 } + +juniAtmVccEndPointAgentV6 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 6 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent was + supported in JUNOSe 5.1 system releases." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. + These capabilitie became obsolete when ATM sub-interface location + support was added to the Juniper-UNI-ATM-MIB." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM2-MIB + INCLUDES { + atmCommonGroup, + atmHostGroup } + VARIATION atmVplLogicalPortDef + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmVplLogicalPortIndex + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmCurrentlyFailingPVplTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVplTable is not supported." + VARIATION atmCurrentlyFailingPVclTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVclTable is not supported." + VARIATION atmVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmVclAddrRowStatus + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmAddrVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmAddrVclTable is not supported." + VARIATION atmVclGenSigDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmVclGenTable is not supported." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup6, + juniAtmAal5Group, + juniAtmSubIfGroup4, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup, + juniAtmSvcGroup2, + juniAtmF4OamCircuitGroup } + ::= { juniAtmVccEndPointAgent 6 } + +juniAtmVccEndPointAgentV7 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 7 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent was supported + in JUNOSe 5.2 system release." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. + These capabilitie became obsolete when support was added to export + ATM sub-interface descriptions to the line cards." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM2-MIB + INCLUDES { + atmCommonGroup, + atmHostGroup } + VARIATION atmVplLogicalPortDef + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmVplLogicalPortIndex + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmCurrentlyFailingPVplTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVplTable is not supported." + VARIATION atmCurrentlyFailingPVclTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVclTable is not supported." + VARIATION atmVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmVclAddrRowStatus + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmAddrVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmAddrVclTable is not supported." + VARIATION atmVclGenSigDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmVclGenTable is not supported." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup6, + juniAtmAal5Group, + juniAtmSubIfGroup4, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup, + juniAtmSvcGroup2, + juniAtmF4OamCircuitGroup, + juniAtmLocationGroup } + ::= { juniAtmVccEndPointAgent 7 } + +juniAtmVccEndPointAgentV8 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 8 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent was supported + in JUNOSe 5.3 and 6.0 system releases." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in + JUNOSe. These capabilities became obsolete when ATM bulk configuration + profile override was introduced." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM2-MIB + INCLUDES { + atmCommonGroup, + atmHostGroup } + VARIATION atmVplLogicalPortDef + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmVplLogicalPortIndex + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmCurrentlyFailingPVplTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVplTable is not supported." + VARIATION atmCurrentlyFailingPVclTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVclTable is not supported." + VARIATION atmVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmVclAddrRowStatus + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmAddrVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmAddrVclTable is not supported." + VARIATION atmVclGenSigDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmVclGenTable is not supported." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup6, + juniAtmAal5Group, + juniAtmSubIfGroup5, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup, + juniAtmSvcGroup2, + juniAtmF4OamCircuitGroup, + juniAtmLocationGroup } + ::= { juniAtmVccEndPointAgent 8 } + +juniAtmVccEndPointAgentV9 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 9 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent was supported + in JUNOSe 6.1 system release." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in + JUNOSe. These capabilities became obsolete when ATM bulk configuration + profile override was introduced." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM2-MIB + INCLUDES { + atmCommonGroup, + atmHostGroup } + VARIATION atmVplLogicalPortDef + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmVplLogicalPortIndex + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmCurrentlyFailingPVplTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVplTable is not supported." + VARIATION atmCurrentlyFailingPVclTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVclTable is not supported." + VARIATION atmVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmVclAddrRowStatus + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmAddrVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmAddrVclTable is not supported." + VARIATION atmVclGenSigDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmVclGenTable is not supported." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup7, + juniAtmAal5Group, + juniAtmSubIfGroup5, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup, + juniAtmSvcGroup2, + juniAtmF4OamCircuitGroup, + juniAtmLocationGroup } + ::= { juniAtmVccEndPointAgent 9 } + +juniAtmVccEndPointAgentV10 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 10 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent is supported + in JUNOSe 7.0 and subsequent system releases." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in + JUNOSe.These capabilities became obsolete when ATM VP Statistics + was introduced." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM2-MIB + INCLUDES { + atmCommonGroup, + atmHostGroup } + VARIATION atmVplLogicalPortDef + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmVplLogicalPortIndex + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmCurrentlyFailingPVplTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVplTable is not supported." + VARIATION atmCurrentlyFailingPVclTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVclTable is not supported." + VARIATION atmVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmVclAddrRowStatus + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmAddrVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmAddrVclTable is not supported." + VARIATION atmVclGenSigDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmVclGenTable is not supported." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup8, + juniAtmAal5Group, + juniAtmSubIfGroup5, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup, + juniAtmSvcGroup2, + juniAtmF4OamCircuitGroup, + juniAtmLocationGroup } + ::= { juniAtmVccEndPointAgent 10 } + +juniAtmVccEndPointAgentV11 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 11 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent is supported + in JUNOSe 7.1 and 7.2 system releases." + STATUS obsolete + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in + JUNOSe. These capabilities became obsolete when SVC support + was removed." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM2-MIB + INCLUDES { + atmCommonGroup, + atmHostGroup } + VARIATION atmVplLogicalPortDef + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmVplLogicalPortIndex + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmCurrentlyFailingPVplTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVplTable is not supported." + VARIATION atmCurrentlyFailingPVclTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVclTable is not supported." + VARIATION atmVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmVclAddrRowStatus + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmAddrVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmAddrVclTable is not supported." + VARIATION atmVclGenSigDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmVclGenTable is not supported." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup8, + juniAtmAal5Group, + juniAtmSubIfGroup6, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup, + juniAtmSvcGroup2, + juniAtmF4OamCircuitGroup2, + juniAtmLocationGroup, + juniAtmVpStatsGroup } + ::= { juniAtmVccEndPointAgent 11 } + +juniAtmVccEndPointAgentV12 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 12 of the ATM VCC end point agent subcomponent of the JUNOSe + SNMP agent. This version of the ATM end point subcomponent is supported + in JUNOSe 7.3 and subsequent system releases." + STATUS current + DESCRIPTION + "The MIBs supported by the SNMP agent for the ATM application in + JUNOSe." + SUPPORTS ATM-MIB + INCLUDES { + atmInterfaceTCGroup, + aal5VccGroup, + atmInterfaceConfGroup2, + atmVccTerminationGroup2 } + VARIATION atmVclAdminStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclReceiveTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclTransmitTrafficDescrIndex + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVccAalType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclRowStatus + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclCastType + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + VARIATION atmVclConnKind + ACCESS read-only + DESCRIPTION + "The atmVccTerminationGroup2 is not used for configuring VCCs. + Use the Juniper-UNI-ATM-MIB." + SUPPORTS ATM2-MIB + INCLUDES { + atmCommonGroup, + atmHostGroup } + VARIATION atmSigSSCOPConEvents + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigSSCOPErrdPdus + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigDetectSetupAttempts + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigEmitSetupAttempts + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigDetectUnavailRoutes + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigEmitUnavailRoutes + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigDetectUnavailResrcs + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigEmitUnavailResrcs + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigDetectCldPtyEvents + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigEmitCldPtyEvents + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigDetectMsgErrors + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigEmitMsgErrors + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigDetectClgPtyEvents + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigEmitClgPtyEvents + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigDetectTimerExpireds + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigEmitTimerExpireds + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigDetectRestarts + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigEmitRestarts + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigInEstabls + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmSigOutEstabls + ACCESS not-implemented + DESCRIPTION + "The atmSigStatTable is not supported." + VARIATION atmVplLogicalPortDef + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmVplLogicalPortIndex + ACCESS not-implemented + DESCRIPTION + "The atmVplLogicalPortTable is not supported." + VARIATION atmInterfaceConfMaxSvpcVpi + ACCESS not-implemented + DESCRIPTION + "The atmInterfaceConfMaxSvpcVpi is not supported." + VARIATION atmInterfaceCurrentMaxSvpcVpi + ACCESS not-implemented + DESCRIPTION + "The atmInterfaceCurrentMaxSvpcVpi is not supported." + VARIATION atmInterfaceConfMaxSvccVpi + ACCESS not-implemented + DESCRIPTION + "The atmInterfaceConfMaxSvccVpi is not supported." + VARIATION atmInterfaceCurrentMaxSvccVpi + ACCESS not-implemented + DESCRIPTION + "The atmInterfaceCurrentMaxSvccVpi is not supported." + VARIATION atmInterfaceConfMinSvccVci + ACCESS not-implemented + DESCRIPTION + "The atmInterfaceConfMinSvccVci is not supported." + VARIATION atmInterfaceCurrentMinSvccVci + ACCESS not-implemented + DESCRIPTION + "The atmInterfaceCurrentMinSvccVci is not supported." + VARIATION atmIntfSigVccRxTrafficDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmIntfSigVccRxTrafficDescrIndex is not supported." + VARIATION atmIntfSigVccTxTrafficDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmIntfSigVccTxTrafficDescrIndex is not supported." + VARIATION atmIntfLeafSetupFailures + ACCESS not-implemented + DESCRIPTION + "The atmIntfLeafSetupFailures is not supported." + VARIATION atmIntfLeafSetupRequests + ACCESS not-implemented + DESCRIPTION + "The atmIntfLeafSetupRequests is not supported." + VARIATION atmCurrentlyFailingPVplTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVplTable is not supported." + VARIATION atmCurrentlyFailingPVclTimeStamp + ACCESS not-implemented + DESCRIPTION + "The atmCurrentlyFailingPVclTable is not supported." + VARIATION atmVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmVclAddrRowStatus + ACCESS not-implemented + DESCRIPTION + "The atmVclAddrTable is not supported." + VARIATION atmAddrVclAddrType + ACCESS not-implemented + DESCRIPTION + "The atmAddrVclTable is not supported." + VARIATION atmVclGenSigDescrIndex + ACCESS not-implemented + DESCRIPTION + "The atmVclGenTable is not supported." + SUPPORTS ATM-FORUM-SNMP-M4-MIB + INCLUDES { + atmfM4General, + atmfM4AtmLayerGroup, + atmfM4VpTestGroup, + atmfM4VcTestGroup } + VARIATION atmfM4NeVersion + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeVersion object is not supported." + VARIATION atmfM4NeStartTime + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeStartTime object is not supported." + VARIATION atmfM4NeAlarmSeverityIndex + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeAlarmSeverityIndex is not supported." + VARIATION atmfM4NeSuppressZeroStats + ACCESS not-implemented + DESCRIPTION + "The atmfM4NeSuppressZeroStats object is not supported." + VARIATION atmfM4IfType + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfType object is not supported." + VARIATION atmfM4IfSubscriberAddress + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfSubscriberAddress object is not supported." + VARIATION atmfM4IfPreferredCarrier + ACCESS not-implemented + DESCRIPTION + "The atmfM4IfPreferredCarrier object is not supported." + VARIATION atmfM4IfFarEndCarrierNetwork + ACCESS not-implemented + DESCRIPTION + "The IfFarEndCarrierNetwork object is not supported." + VARIATION atmfM4VclSegEndPt + ACCESS read-only + DESCRIPTION + "An atmfM4VclEntry cannot be created/modified via SNMP." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmGroup8, + juniAtmAal5Group, + juniAtmSubIfGroup7, + juniAtmVpPingControlGroup, + juniAtmVcPingControlGroup, + juniAtmPingTrapGroup, + juniAtmSvcGroup2, + juniAtmF4OamCircuitGroup2, + juniAtmLocationGroup, + juniAtmVpStatsGroup } + ::= { juniAtmVccEndPointAgent 12 } + +-- ***************************************************************************** +-- ATM VP tunnel agent capabilities +-- ***************************************************************************** +juniAtmVpTunnelAgent OBJECT IDENTIFIER ::= { juniAtmAgent 2 } + +juniAtmVpTunnelAgentV1 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 1 of the ATM VP tunnel subcomponent of the JUNOSe SNMP agent. + This version of the ATM tunnel subcomponent is supported in JUNOSe 3.0 + and subsequent system releases." + STATUS current + DESCRIPTION + "The MIB supported by the SNMP agent for the ATM application in JUNOSe." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmVpTunnelGroup } + ::= { juniAtmVpTunnelAgent 1 } + + +-- ***************************************************************************** +-- ATM NBMA interface agent capabilities +-- ***************************************************************************** +juniAtmNbmaAgent OBJECT IDENTIFIER ::= { juniAtmAgent 3 } + +juniAtmNbmaAgentV1 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 1 of the ATM NBMA interface subcomponent of the JUNOSe SNMP + agent. This version of the ATM NBMA subcomponent is supported in JUNOSe + 3.2 and subsequent system releases." + STATUS current + DESCRIPTION + "The MIB supported by the SNMP agent for the ATM application in JUNOSe." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmNbmaMapGroup } + ::= { juniAtmNbmaAgent 1 } + + +-- ***************************************************************************** +-- ATM Switch agent capabilities +-- +-- This is a placeholder for the agent capabilities for the ATM switch (cross +-- connect) subcomponent of the JUNOSe SNMP agent. +-- The ATM switch subcomponent has not been supported in a released product. +-- ***************************************************************************** +juniAtmSwitchAgent OBJECT IDENTIFIER ::= { juniAtmAgent 4 } +juniAtmSwitchAgentV1 OBJECT IDENTIFIER ::= { juniAtmSwitchAgent 1 } -- Obsolete +juniAtmSwitchAgentV2 OBJECT IDENTIFIER ::= { juniAtmSwitchAgent 2 } -- Obsolete + + +-- ***************************************************************************** +-- ATM traffic shaping agent capabilities +-- ***************************************************************************** +juniAtmTrafficShapingAgent OBJECT IDENTIFIER ::= { juniAtmAgent 5 } + +juniAtmTrafficShapingAgentV1 AGENT-CAPABILITIES + PRODUCT-RELEASE + "Version 1 of the ATM traffic shaping subcomponent of the JUNOSe SNMP + agent. This version of the ATM traffic shaping subcomponent is + supported in JUNOSe 3.3 and subsequent system releases." + STATUS current + DESCRIPTION + "The MIB supported by the SNMP agent for the ATM application in JUNOSe." + SUPPORTS Juniper-UNI-ATM-MIB + INCLUDES { + juniAtmTrafficShapingGroup } + ::= { juniAtmTrafficShapingAgent 1 } + +END |