diff options
Diffstat (limited to 'MIBS/junose/Juniper-FILE-XFER-MIB')
| -rw-r--r-- | MIBS/junose/Juniper-FILE-XFER-MIB | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/MIBS/junose/Juniper-FILE-XFER-MIB b/MIBS/junose/Juniper-FILE-XFER-MIB new file mode 100644 index 0000000..b45ba3b --- /dev/null +++ b/MIBS/junose/Juniper-FILE-XFER-MIB @@ -0,0 +1,375 @@ + +-- ***************************************************************************** +-- Juniper-FILE-XFER-MIB +-- +-- Juniper Networks Enterprise MIB +-- File Transfer MIB +-- +-- Copyright (c) 1999 Redstone Communications, Inc. +-- Copyright (c) 1999, 2001 Unisphere Networks, Inc. +-- Copyright (c) 2002 Juniper Networks, Inc. +-- All Rights Reserved. +-- ***************************************************************************** + +Juniper-FILE-XFER-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, TimeTicks + FROM SNMPv2-SMI + RowStatus, DisplayString + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + JuniName + FROM Juniper-TC + juniMibs + FROM Juniper-MIBs; + +juniFileXferMIB MODULE-IDENTITY + LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Networks, Inc. + Postal: 10 Technology Park Drive + Westford, MA 01886-3146 + USA + Tel: +1 978 589 5800 + E-mail: mib@Juniper.net" + DESCRIPTION + "The File Transfer MIB for Juniper Networks enterprise." + -- Revision History + REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 + DESCRIPTION + "Replaced Unisphere names with Juniper names." + REVISION "200103281346Z" -- 28-Mar-01 08:46 AM EST - JUNOSe 3.0 + DESCRIPTION + "Make it SMIv2 conformant." + REVISION "200005010000Z" -- 1-May-00 - JUNOSe 2.0 + DESCRIPTION + "Key revisions include: + o Obsoleted juniFileXferRemoteUserName. + o Obsoleted juniFileXferRemoteUserPassword. + o Added juniFileXferRouterName. + o Added juniFileXferCopyRunningCfgFailed(9) to juniFileXferStatus." + REVISION "9908180000Z" -- 18-Aug-99 - JUNOSe 1.1 + DESCRIPTION + "Initial version of this MIB module." + ::= { juniMibs 23 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Managed objects +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniFileXferObjects OBJECT IDENTIFIER ::= { juniFileXferMIB 1 } + + +juniFileXferTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniFileXferTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of entries which describe file transfers." + ::= { juniFileXferObjects 1 } + +juniFileXferTableEntry OBJECT-TYPE + SYNTAX JuniFileXferTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A description of a particular file transfer entry." + INDEX { juniFileXferIndex } + ::= { juniFileXferTable 1 } + +JuniFileXferTableEntry ::= SEQUENCE { + juniFileXferIndex INTEGER, + juniFileXferDirection INTEGER, + juniFileXferFileType INTEGER, + juniFileXferRemoteFileName DisplayString, + juniFileXferRemoteUserName DisplayString, + juniFileXferRemoteUserPassword OCTET STRING, + juniFileXferLocalFileName DisplayString, + juniFileXferProtocol INTEGER, + juniFileXferStatus INTEGER, + juniFileXferRowStatus RowStatus, + juniFileXferTimeStamp TimeTicks, + juniFileXferRouterName JuniName } + +juniFileXferIndex OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique index used to identify this entry." + ::= { juniFileXferTableEntry 1 } + +juniFileXferDirection OBJECT-TYPE + SYNTAX INTEGER { + juniFileXferLocalToRemote(1), + juniFileXferRemoteToLocal(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the direction of the file transfer." + DEFVAL { juniFileXferRemoteToLocal } + ::= { juniFileXferTableEntry 2 } + +juniFileXferFileType OBJECT-TYPE + SYNTAX INTEGER { + juniFileXferSoftwareRelease(1), + juniFileXferSystemConfig(2), + juniFileXferRunningConfig(3), + juniFileXferSystemLog(4), + juniFileXferScript(5), + juniFileXferRebootHistory(6), + juniFileXferBulkStatistics(7) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the file type of the file transfer." + DEFVAL { juniFileXferBulkStatistics } + ::= { juniFileXferTableEntry 3 } + +juniFileXferRemoteFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The full path name of the source/destination file on the remote + system." + DEFVAL { "" } + ::= { juniFileXferTableEntry 4 } + +juniFileXferRemoteUserName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..64)) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "The user name to use when requesting the file transfer to/from the + remote system. + + This object has been obsoleted. Use the enterprise host mib in order to + configure the username." + DEFVAL { "anonymous" } + ::= { juniFileXferTableEntry 5 } + +juniFileXferRemoteUserPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..64)) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + + "The password to use when requesting the file transfer to/from the + remote system. When read, this object returns a zero string. Note + that, for security reasons, some FTP servers may insist on a non-zero + length user password. + + This object has been obsoleted. Use the enterprise host MIB in order to + configure the password." + DEFVAL { "anonymous" } + ::= { juniFileXferTableEntry 6 } + +juniFileXferLocalFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The local file name to transfer or to create as a result of an incoming + transfer." + DEFVAL { "" } + ::= { juniFileXferTableEntry 7 } + +juniFileXferProtocol OBJECT-TYPE + SYNTAX INTEGER { + juniFileXferFtp(1), + juniFileXferTftp(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the file transfer protocol type." + DEFVAL { juniFileXferFtp } + ::= { juniFileXferTableEntry 8 } + +juniFileXferStatus OBJECT-TYPE + SYNTAX INTEGER { + juniFileXferSuccessfulCompletion(1), + juniFileXferInProgress(2), + juniFileXferRemoteUnreachable(3), + juniFileXferUserAuthFailed(4), + juniFileXferFileNotFound(5), + juniFileXferFileTooBig(6), + juniFileXferFileIncompatible(7), + juniFileXferPended(8), + juniFileXferCopyRunningCfgFailed(9) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the file transfer." + ::= { juniFileXferTableEntry 9 } + +juniFileXferRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The row status object controls the creation/deletion of rows in this + table. Its semantics are the same as those for the RowStatus textual + convention specified for SNMPv2. + + Setting this object to createAndGo(4) is allowed. If required objects + are missing, the agent will create the row and set its status to + notReady(3). If all of the required objects are present and valid, the + agent will create the row, set it to active and commence the file + transfer. Upon completion of the file transfer, the agent will set the + rowStatus to notInService(2), indicating that the row is valid and + useable by a management client. To commence another transfer, a + management client should set the rowStatus to active(1). + + Setting this object to createAndWait(5) causes an entry to be created + with juniFileXferRowStatus value of notInService(2) if all of the + required objects are present and valid. Or, if some of the required + objects are missing or invalid, the agent will create the row and sets + its status to notReady(3). + + Setting this object to active(1) causes the transfer to start for the + given row. Objects within the row cannot be modified once a row has + been set to active(1), + + Setting this object to destroy(6) causes the corresponding row to be + deleted. + + Note that only a single instance of a row can be active at at any given + moment, although several rows can exist in the table." + ::= { juniFileXferTableEntry 10 } + +juniFileXferTimeStamp OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the last status change for this entry." + ::= { juniFileXferTableEntry 11 } + +juniFileXferRouterName OBJECT-TYPE + SYNTAX JuniName + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name of the router to be used when resolving the hostname portion + of the juniFileXferRemoteFileName object. If this object contains an + invalid or empty value, the default router will be used." + ::= { juniFileXferTableEntry 12 } + +juniFileXferTrapEnabled OBJECT-TYPE + SYNTAX INTEGER { + true(1), + false(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An indication of whether the juniFileXferTrap trap is enabled." + ::= { juniFileXferObjects 2 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Notifications +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniFileXferNotifications OBJECT IDENTIFIER ::= { juniFileXferMIB 2 } +juniFileXferNotifyPrefix OBJECT IDENTIFIER ::= { juniFileXferNotifications 0 } + + +juniFileXferTrap NOTIFICATION-TYPE + OBJECTS { + juniFileXferStatus, + juniFileXferTimeStamp } + STATUS current + DESCRIPTION + "An indication that the status associated with a particular file + transfer entry has changed." + ::= { juniFileXferNotifyPrefix 1 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Conformance information +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniFileXferConformance OBJECT IDENTIFIER ::= { juniFileXferMIB 4 } +juniFileXferCompliances OBJECT IDENTIFIER ::= { juniFileXferConformance 1 } +juniFileXferGroups OBJECT IDENTIFIER ::= { juniFileXferConformance 2 } + +-- +-- compliance statements +-- +juniFileXferCompliance1 MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "Obsolete compliance statement for entities that implement the Juniper + file transfer MIB. This compliance statement became obsolete when + remote user information was removed and router name was added." + MODULE -- this module + MANDATORY-GROUPS { + juniFileXferGroup1, + juniFileXferTrapGroup } + ::= { juniFileXferCompliances 2 } -- JUNOSe 1.1 + +juniFileXferCompliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities that implement the Juniper file + transfer MIB." + MODULE -- this module + MANDATORY-GROUPS { + juniFileXferGroup2, + juniFileXferTrapGroup } + ::= { juniFileXferCompliances 3 } -- JUNOSe 2.0 + +-- +-- units of conformance +-- +juniFileXferGroup1 OBJECT-GROUP + OBJECTS { + juniFileXferIndex, + juniFileXferDirection, + juniFileXferFileType, + juniFileXferRemoteFileName, + juniFileXferRemoteUserName, + juniFileXferRemoteUserPassword, + juniFileXferLocalFileName, + juniFileXferProtocol, + juniFileXferStatus, + juniFileXferRowStatus, + juniFileXferTimeStamp, + juniFileXferTrapEnabled } + STATUS obsolete + DESCRIPTION + "Obsolete collection of objects providing management of file transfers + in a Juniper product. This group became obsolete when remote user + information was removed and juniFileXferRouterName was added." + ::= { juniFileXferGroups 2 } + +juniFileXferGroup2 OBJECT-GROUP + OBJECTS { + juniFileXferIndex, + juniFileXferDirection, + juniFileXferFileType, + juniFileXferRemoteFileName, + juniFileXferLocalFileName, + juniFileXferProtocol, + juniFileXferStatus, + juniFileXferRowStatus, + juniFileXferTimeStamp, + juniFileXferRouterName, + juniFileXferTrapEnabled } + STATUS current + DESCRIPTION + "A collection of objects providing management of file transfers in a + Juniper product." + ::= { juniFileXferGroups 3 } + +juniFileXferTrapGroup NOTIFICATION-GROUP + NOTIFICATIONS { + juniFileXferTrap } + STATUS current + DESCRIPTION + "A management notification pertaining to file transfers." + ::= { juniFileXferGroups 4 } + +END |