diff options
Diffstat (limited to 'MIBS/junose/Juniper-REDUNDANCY-MIB')
| -rw-r--r-- | MIBS/junose/Juniper-REDUNDANCY-MIB | 570 |
1 files changed, 570 insertions, 0 deletions
diff --git a/MIBS/junose/Juniper-REDUNDANCY-MIB b/MIBS/junose/Juniper-REDUNDANCY-MIB new file mode 100644 index 0000000..4a27b17 --- /dev/null +++ b/MIBS/junose/Juniper-REDUNDANCY-MIB @@ -0,0 +1,570 @@ + +-- ***************************************************************************** +-- Juniper-REDUNDANCY-MIB +-- +-- Juniper Networks Enterprise MIB +-- REDUNDANCY MIB +-- +-- Copyright (c) 2003 Juniper Networks Inc. +-- All Rights Reserved. +-- ***************************************************************************** + +Juniper-REDUNDANCY-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks + FROM SNMPv2-SMI + DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION, DateAndTime + FROM SNMPv2-TC + sysUpTime + FROM SNMPv2-MIB + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + juniMibs + FROM Juniper-MIBs; + +juniRedundancyMIB MODULE-IDENTITY + LAST-UPDATED "200312122104Z" -- 12-Dec-03 04:04 PM EST + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Networks, Inc. + Postal: 10 Technology Park Road + Westford, MA 01886-3146 + USA + Tel: +1 978 589 5800 + E-mail: mib@Juniper.net" + DESCRIPTION + "The redundancy configuration MIB for Juniper Networks enterprise." + -- Revision History + REVISION "200312120000Z" -- 12-Dec-03 - JUNOSe 6.0 + DESCRIPTION + "Initial version of this MIB module." + ::= { juniMibs 74 } + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Textual conventions +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +JuniRedundancyState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The current state of redundancy subsystem: + notKnown - Redundancy state is unknown. + fileSystemSyncing - Redundancy operation is based on file system + synchronization. SRP switchover stops forwarding. + disabled - Redundancy operation is based on high availability + model but high availability is not yet operational. + SRP switchover stops forwarding. + initializing - Redundancy operation is based on high availability + model and standby SRP is being bulk synchronized from + active SRP. SRP switchover stops forwarding. + pending - Redundancy operation is based on high availability + model and bulk synchronization of standby SRP completed. + SRP switchover stops forwarding. + active - Redundancy operation is based on high availability model + and high availability is fully operational. SRP + switchover does not stop forwarding." + SYNTAX INTEGER { + notKnown(1), + fileSystemSyncing(2), + disabled(3), + initializing(4), + pending(5), + active(6) } + +JuniRedundancyMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The mode of the redundancy subsystem: + fileSystemSynchronization - SRP synchronization is based on file synchronization. + highAvailability - SRP synchronization is based on high availability + model that allows non-stop forwarding." + SYNTAX INTEGER { + fileSystemSynchronization(1), + highAvailability(2) } + +JuniRedundancyResetReason ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Reason codes for the reset of active SRP or a line card that might result + in switch of control to standby SRP or spare line card. + none - No reset or switchover has occurred and indicates 'power-on' + situation. + notKnown - Reason is unknown. + userInitiated - A safe, manual reset was initiated by the user." + SYNTAX INTEGER { + none(1), + notKnown(2), + userInitiated(3) } + +JuniRedundancySystemActivationType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Various kinds of system activation: + reload - System has reloaded, i.e., no switchover has occurred. + coldSwitch - System switched over from active to standby SRP and the + switchover involved reloading of line cards interrupting + forwarding. + warmSwitch - System switched over from active to standby SRP; line cards were + not reloaded during switchover and forwarding was uninterrupted." + SYNTAX INTEGER { + reload(1), + coldSwitch(2), + warmSwitch(3) } + +JuniRedundancyResetType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Identifies the nature of the reset and slot types involved since the + system is powered on. + notKnown - Reset type is unknown. + srpReload - The reset involved reloading SRP slot(s). + srpSwitchover - The reset involved switchover of SRP slot(s). + linecardReload - The reset involved reloading the line card slot(s). + linecardSwitchover - The reset involved line card redundancy." + SYNTAX INTEGER { + notKnown(1), + srpReload(2), + srpSwitchover(3), + linecardReload(4), + linecardSwitchover(5) } + +JuniRedundancyHistoryCommand ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Identifies the command to be performed on the system activation + history table. + keep - Retain history in persistent storage. + clear - Erase the current entries of juniRedundancySystemActivationHistoryTable." + SYNTAX INTEGER { + keep(1), + clear(2) } + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- MIB Structure +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniRedundancyNotifications OBJECT IDENTIFIER ::= { juniRedundancyMIB 0 } +juniRedundancyObjects OBJECT IDENTIFIER ::= { juniRedundancyMIB 1 } +juniRedundancyMIBConformance OBJECT IDENTIFIER ::= { juniRedundancyMIB 2 } + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Managed object groups +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniRedundancyStatus OBJECT IDENTIFIER ::= {juniRedundancyObjects 1 } +juniRedundancyCfg OBJECT IDENTIFIER ::= {juniRedundancyObjects 2 } +juniRedundancyHistory OBJECT IDENTIFIER ::= {juniRedundancyObjects 3 } + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Managed objects for Redundancy +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- +-- Status sub group definitions +-- +juniRedundancyActiveSlot OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique identifier for active SRP slot." + ::= { juniRedundancyStatus 1 } + +juniRedundancyActiveSlotState OBJECT-TYPE + SYNTAX JuniRedundancyState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of redundancy on active SRP." + ::= { juniRedundancyStatus 2 } + +juniRedundancyStandbySlot OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique identifier for standby SRP slot." + ::= { juniRedundancyStatus 3 } + +juniRedundancyStandbySlotState OBJECT-TYPE + SYNTAX JuniRedundancyState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of redundancy on standby SRP." + ::= { juniRedundancyStatus 4 } + +juniRedundancyLastResetReason OBJECT-TYPE + SYNTAX JuniRedundancyResetReason + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The reason for the last SRP reset." + ::= { juniRedundancyStatus 5 } + +juniRedundancyLastSystemActivationTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUptime when the system is operational either + following a reload or a switchover. The value 0 is a special + value to indicate 'from reset'." + ::= { juniRedundancyStatus 6 } + +juniRedundancyLastSystemActivationType OBJECT-TYPE + SYNTAX JuniRedundancySystemActivationType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of last SRP activation when the system became operational." + ::= { juniRedundancyStatus 7 } + +juniRedundancyHaActiveTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUptime when active SRP enters 'active' state as + indicated in juniRedundancyActiveSlotState object. The value is 0 in + file system synchronization redundancy mode." + ::= { juniRedundancyStatus 8 } + +-- +-- Cfg sub group definitions +-- +juniRedundancyNotifsEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allows enabling and disabling of redundancy subsystem notifications." + DEFVAL { true } + ::= { juniRedundancyCfg 1 } + +juniRedundancyCfgRedundancyMode OBJECT-TYPE + SYNTAX JuniRedundancyMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the redundancy mode configured on the system." + DEFVAL { fileSystemSynchronization } + ::= { juniRedundancyCfg 2 } + +-- +-- History sub group definitions +-- +juniRedundancySystemActivationHistoryTableMaxLength OBJECT-TYPE + SYNTAX Integer32(0..50) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum number of entries allowed in juniRedundancySystemActivationHistoryTable. + A value of 0 will result in no history being displayed in + juniRedundancySystemActivationHistoryTable." + DEFVAL { 0 } + ::= { juniRedundancyHistory 1 } + +juniRedundancySystemActivationHistoryCommand OBJECT-TYPE + SYNTAX JuniRedundancyHistoryCommand + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A control variable to perform certain operations on + juniRedundancySystemActivationHistoryTable." + DEFVAL { keep } + ::= { juniRedundancyHistory 2 } + +juniRedundancySystemActivationHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniRedundancySystemActivationHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that tracks the history of all reloads and switchovers that have + occurred since system is powered on. The maximum number of entries permissible + in this table is defined by juniRedundancySystemActivationHistoryTableMaxLength. + When the number of entries in the table reaches the maximum limit, the next + entry would replace the oldest existing entry in the table." + ::= { juniRedundancyHistory 3 } + +juniRedundancySystemActivationHistoryEntry OBJECT-TYPE + SYNTAX JuniRedundancySystemActivationHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entries in this table contain the reload and switchover information. + Each entry in the table is indexed by juniRedundancySystemActivationHistoryIndex. + The index wraps around to 1 after reaching the maximum value." + INDEX { juniRedundancySystemActivationHistoryIndex } + ::= { juniRedundancySystemActivationHistoryTable 1 } + +JuniRedundancySystemActivationHistoryEntry ::= SEQUENCE { + juniRedundancySystemActivationHistoryIndex Integer32, + juniRedundancyHistoryResetType JuniRedundancyResetType, + juniRedundancyHistoryActivationType JuniRedundancySystemActivationType, + juniRedundancyHistoryPrevActiveSlot Integer32, + juniRedundancyHistoryPrevActiveRelease DisplayString, + juniRedundancyHistoryCurrActiveSlot Integer32, + juniRedundancyHistoryCurrActiveRelease DisplayString, + juniRedundancyHistoryResetReason JuniRedundancyResetReason, + juniRedundancyHistoryActivationTime DateAndTime } + +juniRedundancySystemActivationHistoryIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An integer value for the purpose of indexing system + activation history table. After reaching maximum value as + indicated by juniRedundancySystemActivationHistoryTableMaxLength, + it wraps around to 1." + ::= { juniRedundancySystemActivationHistoryEntry 1 } + +juniRedundancyHistoryResetType OBJECT-TYPE + SYNTAX JuniRedundancyResetType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the nature of the reset - reload or switchover - and the slot + types involved. Depending on the value of this object, certain elements + of JuniRedundancySystemActivationHistoryEntry will not be applicable." + ::= { juniRedundancySystemActivationHistoryEntry 2 } + +juniRedundancyHistoryActivationType OBJECT-TYPE + SYNTAX JuniRedundancySystemActivationType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the activation type of the particular historical system + activation entry with respect to the slot types involved." + ::= { juniRedundancySystemActivationHistoryEntry 3 } + +juniRedundancyHistoryPrevActiveSlot OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the slot number of active SRP or line card that went down." + ::= { juniRedundancySystemActivationHistoryEntry 4 } + +juniRedundancyHistoryPrevActiveRelease OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the system-wide boot release file name of the slot indicated + by juniRedundancyHistoryPrevActiveSlot." + ::= { juniRedundancySystemActivationHistoryEntry 5 } + +juniRedundancyHistoryCurrActiveSlot OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the slot number of standby SRP or spare line card that took over." + ::= { juniRedundancySystemActivationHistoryEntry 6 } + +juniRedundancyHistoryCurrActiveRelease OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the system-wide boot release file name of the slot indicated + by juniRedundancyHistoryCurrActiveSlot." + ::= { juniRedundancySystemActivationHistoryEntry 7 } + +juniRedundancyHistoryResetReason OBJECT-TYPE + SYNTAX JuniRedundancyResetReason + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the reason for reload or switchover of the slots involved." + ::= { juniRedundancySystemActivationHistoryEntry 8 } + +juniRedundancyHistoryActivationTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the date and time when the reload or switchover of the slots + occurred." + ::= { juniRedundancySystemActivationHistoryEntry 9 } + +juniRedundancyHistoryReloads OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of reloads since the system is powered on." + ::= { juniRedundancyHistory 4 } + +juniRedundancyHistoryColdSwitchovers OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of cold switchovers since the system is powered on." + ::= { juniRedundancyHistory 5 } + +juniRedundancyHistoryWarmSwitchovers OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of warm switchovers since the system is powered on." + ::= { juniRedundancyHistory 6 } + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Notifications +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniRedundancyColdSwitchoverNotification NOTIFICATION-TYPE + OBJECTS { + juniRedundancyActiveSlot, + juniRedundancyLastResetReason + } + STATUS current + DESCRIPTION + "This notification is generated in a dual SRP system when control + transfers from one to SRP to the other in file system synchronization + mode or when high availability is not operational. This notification + is sent by the newly active SRP immediately following the switchover + in which configuration is preserved but volatile state is lost." + ::= { juniRedundancyNotifications 1 } + +juniRedundancyWarmSwitchoverNotification NOTIFICATION-TYPE + OBJECTS { + juniRedundancyActiveSlot, + juniRedundancyLastResetReason + } + STATUS current + DESCRIPTION + "This notification is generated in a dual SRP system when control + transfers from one SRP to the other and high availability is + operational. This notification is sent by the newly active SRP + immediately following the switchover in which configuration and + volatile state are preserved." + ::= { juniRedundancyNotifications 2 } + +juniRedundancyStateEnabledNotification NOTIFICATION-TYPE + OBJECTS { + juniRedundancyActiveSlot + } + STATUS current + DESCRIPTION + "A state change notification sent by active SRP whenever system enters + 'active' state." + ::= { juniRedundancyNotifications 3 } + +juniRedundancyStateDisabledNotification NOTIFICATION-TYPE + OBJECTS { + juniRedundancyActiveSlot + } + STATUS current + DESCRIPTION + "A state change notification sent by active SRP whenever system enters + 'disabled' state." + ::= { juniRedundancyNotifications 4 } + +juniRedundancyStatePendingNotification NOTIFICATION-TYPE + OBJECTS { + juniRedundancyActiveSlot + } + STATUS current + DESCRIPTION + "A state change notification sent by active SRP whenever system enters + 'pending' state." + ::= { juniRedundancyNotifications 5 } + +juniRedundancyModeNotification NOTIFICATION-TYPE + OBJECTS { + juniRedundancyActiveSlot, + juniRedundancyCfgRedundancyMode + } + STATUS current + DESCRIPTION + "A mode change notification sent by active SRP whenever redundancy mode + of the system is changed from 'fileSystemSynchronization' to 'highAvailability' + and vice versa." + ::= { juniRedundancyNotifications 6 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Conformance information +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniRedundancyMIBCompliances OBJECT IDENTIFIER ::= { juniRedundancyMIBConformance 1 } +juniRedundancyMIBGroups OBJECT IDENTIFIER ::= { juniRedundancyMIBConformance 2 } + +-- +-- compliance statements +-- +juniRedundancyMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for system redundancy support." + MODULE -- this module + MANDATORY-GROUPS { + juniRedundancyStatusGroup, + juniRedundancyCfgGroup, + juniRedundancyHistoryGroup, + juniRedundancyNotificationGroup + } + ::= { juniRedundancyMIBCompliances 1 } + +-- +-- units of conformance +-- +juniRedundancyStatusGroup OBJECT-GROUP + OBJECTS { + juniRedundancyActiveSlot, + juniRedundancyActiveSlotState, + juniRedundancyStandbySlot, + juniRedundancyStandbySlotState, + juniRedundancyLastResetReason, + juniRedundancyLastSystemActivationTime, + juniRedundancyLastSystemActivationType, + juniRedundancyHaActiveTime } + STATUS current + DESCRIPTION + "The collection of redundancy status objects." + ::= { juniRedundancyMIBGroups 1 } + +juniRedundancyCfgGroup OBJECT-GROUP + OBJECTS { + juniRedundancyNotifsEnabled, + juniRedundancyCfgRedundancyMode } + STATUS current + DESCRIPTION + "The collection of redundancy configuration objects." + ::= { juniRedundancyMIBGroups 2 } + +juniRedundancyHistoryGroup OBJECT-GROUP + OBJECTS { + juniRedundancySystemActivationHistoryTableMaxLength, + juniRedundancySystemActivationHistoryCommand, + juniRedundancyHistoryResetType, + juniRedundancyHistoryActivationType, + juniRedundancyHistoryPrevActiveSlot, + juniRedundancyHistoryPrevActiveRelease, + juniRedundancyHistoryCurrActiveSlot, + juniRedundancyHistoryCurrActiveRelease, + juniRedundancyHistoryResetReason, + juniRedundancyHistoryActivationTime, + juniRedundancyHistoryReloads, + juniRedundancyHistoryColdSwitchovers, + juniRedundancyHistoryWarmSwitchovers } + STATUS current + DESCRIPTION + "The collection of redundancy history objects." + ::= { juniRedundancyMIBGroups 3 } + +juniRedundancyNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { + juniRedundancyColdSwitchoverNotification, + juniRedundancyWarmSwitchoverNotification, + juniRedundancyStateEnabledNotification, + juniRedundancyStateDisabledNotification, + juniRedundancyStatePendingNotification, + juniRedundancyModeNotification } + STATUS current + DESCRIPTION + "The collection of notifications for redundancy events." + ::= { juniRedundancyMIBGroups 4 } + +END |