diff options
Diffstat (limited to 'MIBS/junose/Juniper-System-Clock-MIB')
| -rw-r--r-- | MIBS/junose/Juniper-System-Clock-MIB | 1677 |
1 files changed, 1677 insertions, 0 deletions
diff --git a/MIBS/junose/Juniper-System-Clock-MIB b/MIBS/junose/Juniper-System-Clock-MIB new file mode 100644 index 0000000..0aa5ca4 --- /dev/null +++ b/MIBS/junose/Juniper-System-Clock-MIB @@ -0,0 +1,1677 @@ + +-- ***************************************************************************** +-- Juniper-System-Clock-MIB +-- +-- Juniper Networks Enterprise MIB +-- System Clock MIB +-- +-- Copyright (c) 2002 Unisphere Networks, Inc. +-- Copyright (c) 2002, 2003 Juniper Networks, Inc. +-- All Rights Reserved. +-- ***************************************************************************** + +Juniper-System-Clock-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DateAndTime, DisplayString, TruthValue, RowStatus + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + JuniEnable + FROM Juniper-TC + juniMibs + FROM Juniper-MIBs; + +juniSysClockMIB MODULE-IDENTITY + LAST-UPDATED "200512141401Z" -- 14-Dec-05 10:01 AM EDT + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Networks, Inc. + Postal: 10 Technology Park Drive + Westford, MA 01886-3146 + USA + Tel: +1 978 589 5800 + Email: mib@Juniper.net" + DESCRIPTION + "The System Clock and Network Time Protocol (NTP) MIB for the Juniper + Networks enterprise. + + The System Clock section of the MIB allows setting the system clock + time, date and timezone. All definitions are based on the Gregorian + calendar. + + The NTP portion of the MIB provides management for the local NTP + client/server, which adheres to RFC 1305, the 'Network Time Protocol + (Version 3) Specification, Implementation and Analysis'." + -- Revision History + REVISION "200703221400Z" -- 22-Mar-07 10:00 AM EDT - JUNOSe7.1 + DESCRIPTION + "Incorporate 2007 U.S.A. Daylight Saving Time changes." + REVISION "200512141401Z" -- 14-Dec-05 10:01 AM EDT - JUNOSe 7.0 + DESCRIPTION + "Added juniNtpPeerLastUpdateTime to Peer Table." + REVISION "200309151401Z" -- 15-Sep-03 10:01 AM EDT - JUNOSe 5.0 + DESCRIPTION + "Replaced Unisphere names with Juniper names." + REVISION "200309121337Z" -- 12-Sep-03 09:37 AM EDT - JUNOSe 4.1 + DESCRIPTION + "Added an indicator to stratum number that no stratum is set. + Added traps for significant NTP state changes. + Added replacement clock offset and frequency error objects with + DisplaySting syntax." + REVISION "200204041456Z" -- 04-Apr-02 09:56 AM EST - JUNOSe 4.0 + DESCRIPTION + "Initial version of this MIB module." + ::= { juniMibs 56 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Textual conventions +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +JuniSysClockMonth ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The month of the year." + SYNTAX INTEGER { + january(1), + february(2), + march(3), + april(4), + may(5), + june(6), + july(7), + august(8), + september(9), + october(10), + november(11), + december(12) } + +JuniSysClockWeekOfTheMonth ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The week of the month." + SYNTAX INTEGER { + weekFirst(0), + weekOne(1), + weekTwo(2), + weekThree(3), + weekFour(4), + weekFive(5), + weekLast(6) } + +JuniSysClockDayOfTheWeek ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The day of the week." + SYNTAX INTEGER { + sunday(0), + monday(1), + tuesday(2), + wednesday(3), + thursday(4), + friday(5), + saturday(6) } + +JuniSysClockHour ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The hour of the day. Uses 24-hour clock format." + SYNTAX Integer32 (0..23) + +JuniSysClockMinute ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The minute of the hour." + SYNTAX Integer32 (0..59) + +-- +-- NTP textual-conventions +-- +JuniNtpTimeStamp ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The ASCII character representation of time in 64-bit unsigned long + format, where the integer part is the first 32 bits and the fraction + part is the last 32 bits. This represents the time stamp as defined in + the NTP packet header format, which is the number of seconds since 1 + January 1900. The textual form of an unsigned decimal number is taken + from the NVT ASCII graphics character set (codes 46 and 48 through 57)." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992. + J. Postel & J. Reynolds, 'NVT ASCII character set', RFC-854, May 1983." + SYNTAX OCTET STRING (SIZE(0..21)) + +JuniNtpClockSignedTime ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The ASCII character representation of NTP clock error time in seconds + as a signed value. The first 16 bits represents integer part of the + signed value and the last 16 bits represents the fraction part of the + signed value. The textual form of a signed decimal number is taken from + the NVT ASCII graphics character set (codes 43, 45, 46 and 48 through + 57)." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992. + J. Postel & J. Reynolds, 'NVT ASCII character set', RFC-854, May 1983." + SYNTAX OCTET STRING (SIZE(0..11)) + +JuniNtpClockUnsignedTime ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The ASCII character representation of NTP clock error time in seconds + as an unsigned value. The first 8 bits represents the integer part of + the unsigned value and the last 48 bits represents the fraction part of + the unsigned value. The textual form of an unsigned decimal number is + taken from the NVT ASCII graphics character set (codes 46 and 48 through + 57)." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992. + J. Postel & J. Reynolds, 'NVT ASCII character set', RFC-854, May 1983" + SYNTAX OCTET STRING (SIZE(0..11)) + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Managed objects +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniSysClockObjects OBJECT IDENTIFIER ::= { juniSysClockMIB 1 } +juniNtpObjects OBJECT IDENTIFIER ::= { juniSysClockMIB 2 } + +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- System clock time, date and timezone configurations. +-- +-- This section of the MIB allows setting the system clock time, date and +-- timezone. All definitions are based on the Gregorian calendar. +-- +-- Time and date fields to be set in juniSysClockDateAndTime object: +-- field octets contents range +-- ===== ====== ======== ===== +-- 1 1-2 year 0..65536 - may be restricted +-- 2 3 month 1..12 +-- 3 4 day 1..31 +-- 4 5 hour 0..23 +-- 5 6 minutes 0..59 +-- 6 7 seconds 0..60 - use 60 for leap-second +-- 7 8 deci-seconds 0..9 - ignored +-- 8 9 direction from UTC '+' / '-' +-- 9 10 hours from UTC 0..13 +-- 10 11 minutes from UTC 0..59 +-- +-- ///////////////////////////////////////////////////////////////////////////// + +-- +-- The system clock object definitions are organized into the following +-- functional sections: +-- +juniSysClockTime OBJECT IDENTIFIER ::= { juniSysClockObjects 1 } +juniSysClockDst OBJECT IDENTIFIER ::= { juniSysClockObjects 2 } + +--////////////////////////////////////////////////////////////////////////////// +-- +-- System time settings. +-- +--////////////////////////////////////////////////////////////////////////////// +juniSysClockDateAndTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to manage the system clock time, date and timezone. + If the Network Time Protocol (NTP) is enabled, attempts to set this + object will result in an inconsistantValue error. For sets, the + implementation may check the value of the year and if it is outside of a + 'reasonable' range (e.g., 1999..2035) it may return an inconsistantValue + error. Only system clock time and date will be set if the timezone + offset is not set along with the timezone name." + ::= { juniSysClockTime 1 } + +juniSysClockTimeZoneName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..63)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name of the timezone. Timezone name take effects only with its offset + set along with it." + ::= { juniSysClockTime 2 } + + +--////////////////////////////////////////////////////////////////////////////// +-- +-- Summer time daylight savings time (DST) settings. +-- +-- This group of objects are used to manage day light saving time in two modes. +-- 1. Absolute mode - This can only be set for a single year at a time. +-- 2. Recurrent mode - Remains in effect until it is reset. +-- 3. RecognizedUS - Use defaults for known USA timezones. +-- +-- The above modes are mutually exclusive. +-- +--////////////////////////////////////////////////////////////////////////////// +juniSysClockDstName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..63)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name of the daylight savings time (DST) zone. Setting any standard + US DST timezone name with recurrent mode will result in turning on + corresponding DST recurrent mode values for the timezone." + ::= { juniSysClockDst 1 } + +juniSysClockDstOffset OBJECT-TYPE + SYNTAX Integer32 (1..1440) + UNITS "minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The offset, in minutes, from the base timezone for the DST." + DEFVAL { 60 } + ::= { juniSysClockDst 2 } + +juniSysClockDstStatus OBJECT-TYPE + SYNTAX INTEGER { + off(0), + recurrent(1), + absolute(2), + recognizedUS(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The state of DST. With each state, only corresponding objects can be + set. When the state is off(0), set values will be ignored." + ::= { juniSysClockDst 3 } + + +-- +-- Absolute daylight savings time (DST) objects +-- +juniSysClockDstAbsoluteStartTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the start time for absolute DST. Only the year, + month, day, hour and minutes fields of the object are used. The other + fields will be ignored for a Set operation and will return zeroes for a + Get operation." + ::= { juniSysClockDst 4 } + +juniSysClockDstAbsoluteStopTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the stop time for absolute DST. Only the year, + month, day, hour and minutes fields of the object are used. The other + fields will be ignored for a Set operation and will return zeroes when + read." + ::= { juniSysClockDst 5 } + + +-- +-- Recurrent daylight savings time (DST) +-- +-- The default values are based on the 1987 law for the USA. +-- If none of the recurrent objects are not set below, if all other +-- conditions are ok, appropriate default values will take effect. +-- +juniSysClockDstRecurStartMonth OBJECT-TYPE + SYNTAX JuniSysClockMonth + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The start month for DST recurrence. The default value is based on the + 2007 law for the USA." + DEFVAL { march } + ::= { juniSysClockDst 6 } + +juniSysClockDstRecurStartWeek OBJECT-TYPE + SYNTAX JuniSysClockWeekOfTheMonth + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The start week of the month for DST recurrence. The default value is + based on the 2007 law for the USA." + DEFVAL { weekTwo } + ::= { juniSysClockDst 7 } + +juniSysClockDstRecurStartDay OBJECT-TYPE + SYNTAX JuniSysClockDayOfTheWeek + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The start day of the week for DST recurrence. The default value is + based on the 2007 law for the USA." + DEFVAL { sunday } + ::= { juniSysClockDst 8 } + +juniSysClockDstRecurStartHour OBJECT-TYPE + SYNTAX JuniSysClockHour + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The start hour for DST recurrence. The default value is based on the + 2007 law for the USA." + DEFVAL { 1 } + ::= { juniSysClockDst 9 } + +juniSysClockDstRecurStartMinute OBJECT-TYPE + SYNTAX JuniSysClockMinute + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The start minute for DST recurrence. The default value is based on the + 2007 law for the USA." + DEFVAL { 0 } + ::= { juniSysClockDst 10 } + +juniSysClockDstRecurStopMonth OBJECT-TYPE + SYNTAX JuniSysClockMonth + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The stop month for DST recurrence. The default value is based on the + 2007 law for the USA." + DEFVAL { november } + ::= { juniSysClockDst 11 } + +juniSysClockDstRecurStopWeek OBJECT-TYPE + SYNTAX JuniSysClockWeekOfTheMonth + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The stop week of the month for DST recurrence. The default value is + based on the 2007 law for the USA." + DEFVAL { weekFirst } + ::= { juniSysClockDst 12 } + +juniSysClockDstRecurStopDay OBJECT-TYPE + SYNTAX JuniSysClockDayOfTheWeek + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The stop day of the week for DST recurrence. The default value is + based on the 2007 law for the USA." + DEFVAL { sunday } + ::= { juniSysClockDst 13 } + +juniSysClockDstRecurStopHour OBJECT-TYPE + SYNTAX JuniSysClockHour + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The stop hour for DST recurrence. The default value is based on the + 2007 law for the USA." + DEFVAL { 2 } + ::= { juniSysClockDst 14 } + +juniSysClockDstRecurStopMinute OBJECT-TYPE + SYNTAX JuniSysClockMinute + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The stop minutes for DST recurrence. The default value is based on the + 2007 law for the USA." + DEFVAL { 0 } + ::= { juniSysClockDst 15 } + + +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- NTP MIB object definitions are organized into the following functional +-- sections: +-- +-- ///////////////////////////////////////////////////////////////////////////// +juniNtpSysClock OBJECT IDENTIFIER ::= { juniNtpObjects 1 } +juniNtpClient OBJECT IDENTIFIER ::= { juniNtpObjects 2 } +juniNtpServer OBJECT IDENTIFIER ::= { juniNtpObjects 3 } +juniNtpPeers OBJECT IDENTIFIER ::= { juniNtpObjects 4 } +juniNtpAccessGroup OBJECT IDENTIFIER ::= { juniNtpObjects 5 } + +-- +-- Note: 1. juniNtpSysClock, juniNtpClient and juniNtpPeers object groups are +-- system wide configurations. +-- 2. juniNtpServer and juniNtpAccessGroup are per router configurations. +-- + +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- NTP system clock status data +-- +-- ///////////////////////////////////////////////////////////////////////////// +juniNtpSysClockState OBJECT-TYPE + SYNTAX INTEGER { + neverFrequencyCalibrated(0), + frequencyCalibrated(1), + setToServerTime(2), + frequencyCalibrationIsGoingOn(3), + synchronized(4), + spikeDetected(5) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the state of the NTP on the system clock. Clock states are: + 0 - Clock has never been calibrated for frequency errors + 1 - Clock frequency errors calibration has done + 2 - Clock time has set to server time + 3 - Clock frequency errors calibration is going on + 4 - Clock has synchronized its time + 5 - Clock has detected spike " + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + ::= { juniNtpSysClock 1 } + +juniNtpSysClockOffsetError OBJECT-TYPE + SYNTAX JuniNtpClockSignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Displays the estimated offset error of the system clock relative to the + master clock in seconds. This variable can take on both positive and + negative values; the value will be positive if the system clock is ahead + of the master clock; the value will be negative if the system clock is + behind the master clock. This offset value will be used by the internal + NTP filter algorithm to adjust the system clock to correct any error it + may have. + + This object has been deprecated in favor of the + juniNtpSysClockOffsetErrorNew object, which uses DisplayString for its + SYNTAX." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + ::= { juniNtpSysClock 2 } + +juniNtpSysClockFrequencyError OBJECT-TYPE + SYNTAX Integer32 + UNITS "ppm" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Displays the system clock frequency error in parts per million (ppm). + It will always be a positive value. This error adjustment happens when + the system reboots or the NTP is enabled for the first time and it may + take up to fifteen minutes to complete. + + Each system clock oscillator interrupts to update its clock. If, for + example, it interrupts one million time per second then it has a + resolution of microseconds. This is also the frequency of the clock + update. Frequency error means that this system clock failed to update + by parts per millionth of a second. + + For example, if the frequency error is 1ppm, it means the clock is ahead + by 0.864 second in a day, and therefore the clock will need to be + corrected by that amount in the next 24 hours for the clock to be + accurate. + + The frequency error varies with temperature. Therefore the system clock + will usually need to be corrected when the system boots, based on the + temperature at which it is operating. + + This object has been deprecated in favor of the + juniNtpSysClockFrequencyErrorNew object, which uses DisplayString for + its SYNTAX." + ::= { juniNtpSysClock 3 } + +juniNtpSysClockRootDelay OBJECT-TYPE + SYNTAX JuniNtpClockSignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates the NTP time message total Network roundtrip delay to + the primary reference source at the root of the synchronization subnet, + in seconds. Note that this variable can take on both positive and + negative values, depending on clock precision and skew." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + ::= { juniNtpSysClock 4 } + +juniNtpSysClockRootDispersion OBJECT-TYPE + SYNTAX JuniNtpClockUnsignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates the maximum error relative to the primary reference + source at the root of the synchronization subnet, in seconds. Only + positive values greater than zero are possible." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + ::= { juniNtpSysClock 5 } + +juniNtpSysClockStratumNumber OBJECT-TYPE + SYNTAX Integer32 (-1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the stratum number of the system clock. + -1 - shows stratum is not set + 1 - primary reference (e.g. calibrated atomic clock, radio clock) + 2-255 - secondary reference (via NTP) " + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + ::= { juniNtpSysClock 6 } + +juniNtpSysClockLastUpdateTime OBJECT-TYPE + SYNTAX JuniNtpTimeStamp + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the time of the system clock at the time when it was last + updated by any associated NTP server(peer)." + ::= { juniNtpSysClock 7 } + +juniNtpSysClockLastUpdateServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the IP address of the NTP server (peer) which done last update + to the system clock." + ::= { juniNtpSysClock 8 } + +juniNtpSysClockOffsetErrorNew OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..25)) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the estimated offset error of the system clock relative to the + master clock in seconds. This variable can take on both positive and + negative values; the value will be positive if the system clock is ahead + of the master clock; the value will be negative if the system clock is + behind the master clock. This offset value will be used by the internal + NTP filter algorithm to adjust the system clock to correct any error it + may have." + ::= { juniNtpSysClock 9 } + +juniNtpSysClockFrequencyErrorNew OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..25)) + UNITS "ppm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the system clock frequency error in parts per million (ppm). + It will always be a positive value. This error adjustment happens when + the system reboots or the NTP is enabled for the first time and it may + take up to fifteen minutes to complete. + + Each system clock oscillator interrupts to update its clock. If, for + example, it interrupts one million time per second then it has a + resolution of microseconds. This is also the frequency of the clock + update. Frequency error means that this system clock failed to update + by parts per millionth of a second. + + For example, if the frequency error is 1ppm, it means the clock is ahead + by 0.864 second in a day, and therefore the clock will need to be + corrected by that amount in the next 24 hours for the clock to be + accurate. + + The frequency error varies with temperature. Therefore the system clock + will usually need to be corrected when the system boots, based on the + temperature at which it is operating." + ::= { juniNtpSysClock 10 } + + +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- NTP client configurations +-- +-- Note: Any router can be enabled as a NTP client and but one at time for whole +-- of the system. +-- ///////////////////////////////////////////////////////////////////////////// +juniNtpClientAdminStatus OBJECT-TYPE + SYNTAX JuniEnable + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "By enabling/disabling the NTP admin status, the router is enabled/ + disabled to run as NTP client for the correction and synchronization of + the system clock time with the reliable time sources (stratum time + servers). At any given time, only one NTP client can run on any router + on the system. + + Sets the NTP admin status along with the routerIndex where NTP client + has be enabled in that router context." + DEFVAL { disable } + ::= { juniNtpClient 1 } + +juniNtpClientSystemRouterIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the router to be enabled or disabled as the system-wide + NTP client. Always set along with juniNtpClientAdminStatus. + + This is also the router context when NTP is enabled." + ::= { juniNtpClient 2 } + +juniNtpClientPacketSourceIfIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When the NTP client sends an NTP packet, the source IP address is + normally set to the address of the interface through which the NTP + packet is sent. + + Sets all the outgoing NTP packets' source ifIndex to one specific + ifIndex on the NTP client from which the source ifIndex is taken. This + ifIndex will be the index of the IP interface as NTP is IP/UDP based. + If the value is zero, it means no interface has configured." + ::= { juniNtpClient 3 } + +juniNtpClientBroadcastDelay OBJECT-TYPE + SYNTAX Integer32 (0..999999) + UNITS "microseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allows to set the estimated round-trip broadcast delay between the + system client and broadcast servers (peers)." + DEFVAL { 3000 } + ::= { juniNtpClient 4 } + +juniNtpClientIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniNtpClientIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Lists all the NTP client's interfaces enabled for NTP. All the IP + interfaces on the NTP client are by default enabled for NTP + communications and can be disabled individually on each IP interface. + If desired, any IP interface can be blocked from participating in NTP + communication." + ::= { juniNtpClient 5 } + +juniNtpClientIfEntry OBJECT-TYPE + SYNTAX JuniNtpClientIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry is per interface config for NTP." + INDEX { juniNtpClientIfRouterIndex, + juniNtpClientIfIfIndex } + ::= { juniNtpClientIfTable 1 } + +JuniNtpClientIfEntry ::= SEQUENCE { + juniNtpClientIfRouterIndex Unsigned32, + juniNtpClientIfIfIndex Integer32, + juniNtpClientIfDisable TruthValue, + juniNtpClientIfIsBroadcastClient TruthValue, + juniNtpClientIfIsBroadcastServer TruthValue, + juniNtpClientIfIsBroadcastServerVersion Integer32, + juniNtpClientIfIsBroadcastServerDelay Integer32} + +juniNtpClientIfRouterIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index of the router to be enabled or disabled as an NTP client." + ::= { juniNtpClientIfEntry 1 } + +juniNtpClientIfIfIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifIndex of the interface on the NTP client." + ::= { juniNtpClientIfEntry 2 } + +juniNtpClientIfDisable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/disable NTP on the interface." + ::= { juniNtpClientIfEntry 3 } + +juniNtpClientIfIsBroadcastClient OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/disable NTP client's interface as broadcast client. As NTP + client's broadcast interface, it receives the broadcast NTP messages + from the associated servers (peers)." + ::= { juniNtpClientIfEntry 4 } + +juniNtpClientIfIsBroadcastServer OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/disable NTP interface as broadcast server. As NTP server's + broadcast interface, it broadcast NTP messages on the interfac." + ::= { juniNtpClientIfEntry 5 } + +juniNtpClientIfIsBroadcastServerVersion OBJECT-TYPE + SYNTAX Integer32 (1..4) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "NTP Server Version on the NTP broadcast server interface. Default + version is 3" + DEFVAL { 3} + ::= { juniNtpClientIfEntry 6 } + + +juniNtpClientIfIsBroadcastServerDelay OBJECT-TYPE + SYNTAX Integer32 (4..17) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Poll Interval for broadcasting NTP messages in seconds as a power of + two. Default value is 6(64s). Minimal value is 4(16s) and maximum value + is 17 (36.4h)." + DEFVAL {6} + ::= { juniNtpClientIfEntry 7 } + +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- NTP server configurations on the system +-- Note: Any and every router can be NTP server on the system +-- and all servers' common time source is system clock +-- ///////////////////////////////////////////////////////////////////////////// +juniNtpServerStratumNumber OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the stratum number (level) of the NTP server. Due to one + system clock, setting the stratum number have a effect of setting all + the NTP servers' stratum to one stratum number(level) on the system." + DEFVAL { 8 } + ::= { juniNtpServer 1 } + +juniNtpServerAdminStatus OBJECT-TYPE + SYNTAX JuniEnable + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable the NTP server on the router." + ::= { juniNtpServer 2 } + + +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- NTP peers' associations +-- Note: These are the NTP servers running on different hosts associated with +-- one NTP client on the system for time synchronisation. +-- +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- Peer config table +-- +juniNtpPeerCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniNtpPeerCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides information on the peers with which the NTP client + has associations. The associated peers(servers) to client will be + running different hosts." + ::= { juniNtpPeers 1 } + +juniNtpPeerCfgEntry OBJECT-TYPE + SYNTAX JuniNtpPeerCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry provides one NTP server's configuration information. Each + peer is uniquely identified by the routerIndex of the client to which it + has to be associated and the Ip address of the remote server(peer) + itself. + + Entries are automatically created when the user configures the remote + peer NTP server info on the system which has to be associated with the + NTP client and deleted when the user removes the peer association from + the NTP server." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + INDEX { juniNtpClientIfRouterIndex, + juniNtpPeerCfgIpAddress } + ::= { juniNtpPeerCfgTable 1 } + +JuniNtpPeerCfgEntry ::= SEQUENCE { + juniNtpPeerCfgIpAddress IpAddress, + juniNtpPeerCfgNtpVersion Integer32, + juniNtpPeerCfgPacketSourceIfIndex Integer32, + juniNtpPeerCfgIsPreferred TruthValue, + juniNtpPeerCfgRowStatus RowStatus } + +juniNtpPeerCfgIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Peer's IP address." + ::= { juniNtpPeerCfgEntry 1 } + +juniNtpPeerCfgNtpVersion OBJECT-TYPE + SYNTAX Integer32 (1..4) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Displays the peer server NTP software version." + ::= { juniNtpPeerCfgEntry 2 } + +juniNtpPeerCfgPacketSourceIfIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "All the outgoing NTP packets' source address can be configured to one + specific interface address on the NTP peer server. + + This object allows to configure all the outgoing NTP packets' source IP + ifIndex to one specific IP ifIndex on the NTP server." + ::= { juniNtpPeerCfgEntry 3 } + +juniNtpPeerCfgIsPreferred OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Select whether this NTP server is a preferred time source to the + NTP client to which it has association." + ::= { juniNtpPeerCfgEntry 4 } + +juniNtpPeerCfgRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniNtpPeerCfgRowStatus " + ::= { juniNtpPeerCfgEntry 5 } + + +-- +-- Peer data table +-- +juniNtpPeerTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniNtpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides information on the peers with which the NTP client + has associations. The associated peers (servers) to client will be + running different hosts." + ::= { juniNtpPeers 2 } + +juniNtpPeerEntry OBJECT-TYPE + SYNTAX JuniNtpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry provides one NTP server (peer) information. Each peer is + uniquely identified by the routerIndex of the client to which it has to + be associated and the Ip address of the remote server (peer) itself. + + Entries are automatically created when the user configures the remote + peer NTP server info on the system which has to be associated with the + NTP client and deleted when the user removes the peer association from + the NTP server." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + INDEX { juniNtpClientIfRouterIndex, + juniNtpPeerCfgIpAddress } + ::= { juniNtpPeerTable 1 } + +JuniNtpPeerEntry ::= SEQUENCE { + juniNtpPeerState OCTET STRING, + juniNtpPeerStratumNumber Integer32, + juniNtpPeerAssociationMode INTEGER, + juniNtpPeerBroadcastInterval Integer32, + juniNtpPeerPolledInterval Integer32, + juniNtpPeerPollingInterval Integer32, + juniNtpPeerDelay JuniNtpClockSignedTime, + juniNtpPeerDispersion JuniNtpClockUnsignedTime, + juniNtpPeerOffsetError JuniNtpClockSignedTime, + juniNtpPeerReachability OCTET STRING, + juniNtpPeerPrecision JuniNtpClockSignedTime, + juniNtpPeerRootDelay JuniNtpClockSignedTime, + juniNtpPeerRootDispersion JuniNtpClockUnsignedTime, + juniNtpPeerRootSyncDistance JuniNtpClockSignedTime, + juniNtpPeerRootTime JuniNtpTimeStamp, + juniNtpPeerRootTimeUpdateServer IpAddress, + juniNtpPeerReceiveTime JuniNtpTimeStamp, + juniNtpPeerTransmitTime JuniNtpTimeStamp, + juniNtpPeerRequestTime JuniNtpTimeStamp, + juniNtpPeerLastUpdateTime Unsigned32 } + +juniNtpPeerState OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer server association state to NTP client on the system. + + Bit Peer State Description + --- ---------- ------------------------------------------------ + 0 master Means NTP client on the system has chosen this peer + server as the master. + 1 configured Confirms peer server configured for the NTP client. + 2 selected NTP client will consider this peer server when it + chooses the master. + 3 unusable Indication that the server does not meet the initial + criteria for the master + 4 preferred Indicates as preferred time source. + 5 correct NTP client considers the peer server's clock is + reasonably correct. + 6 incorrect NTP client considers the peer server's clock is + not reasonably correct + 7 reserved + + Each bit position value of 0 and 1 disables and enables that peer + state respectively. " + ::= { juniNtpPeerEntry 1 } + +juniNtpPeerStratumNumber OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer server system clock stratum number." + ::= { juniNtpPeerEntry 2 } + +juniNtpPeerAssociationMode OBJECT-TYPE + SYNTAX INTEGER { + broacastServer(0), + multicastServer(1), + unicastServer(2) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer server association mode to the NTP client on the + router. + broadcastServer - Broadcast only NTP messages. + multicastServer - Broadcast only NTP messages for IGMP multicast + Network. + unicastServer - Only sends NTP poll messages to the peer servers." + ::= { juniNtpPeerEntry 3 } + +juniNtpPeerBroadcastInterval OBJECT-TYPE + SYNTAX Integer32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the broadcast time interval of the NTP time messages from the + peer when the peer is enabled either as broadcast server or multicast + server." + ::= { juniNtpPeerEntry 4 } + +juniNtpPeerPolledInterval OBJECT-TYPE + SYNTAX Integer32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the time interval at which peer will be polled by NTP client + with which peer has associations when it is enabled as unicast server." + ::= { juniNtpPeerEntry 5 } + +juniNtpPeerPollingInterval OBJECT-TYPE + SYNTAX Integer32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the time interval at which peer will poll the servers with + which peer has associations when it is enabled as unicast server." + ::= { juniNtpPeerEntry 6 } + +juniNtpPeerDelay OBJECT-TYPE + SYNTAX JuniNtpClockSignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer server broadcast delay." + ::= { juniNtpPeerEntry 7 } + +juniNtpPeerDispersion OBJECT-TYPE + SYNTAX JuniNtpClockUnsignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer server dispersion." + ::= { juniNtpPeerEntry 8 } + +juniNtpPeerOffsetError OBJECT-TYPE + SYNTAX JuniNtpClockSignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer server offset error." + ::= { juniNtpPeerEntry 9 } + +juniNtpPeerReachability OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer reachability status. An 8-bit number that shows + whether or not the peer server responded to the last eight requests to + the server to which it has association; one indicates a response, zero + indicates no response. Count from rightmost to leftmost as latest to + later requests as reachability states. + + For example, 0b11111111 indicates that the peer server responded to the + last eight requests. If the system client reaches one peer server less + often than it does other peer servers, that server is not a good choice + for the master" + ::= { juniNtpPeerEntry 10 } + +juniNtpPeerRootDelay OBJECT-TYPE + SYNTAX JuniNtpClockSignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer server root delay." + ::= { juniNtpPeerEntry 11 } + +juniNtpPeerRootDispersion OBJECT-TYPE + SYNTAX JuniNtpClockUnsignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer server root dispersion." + ::= { juniNtpPeerEntry 12 } + +juniNtpPeerRootSyncDistance OBJECT-TYPE + SYNTAX JuniNtpClockSignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the peer server synchronization distance. Measure of the + total time error since the update in the path to the stratum 1 server." + ::= { juniNtpPeerEntry 13 } + +juniNtpPeerRootTime OBJECT-TYPE + SYNTAX JuniNtpTimeStamp + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Last time at which the stratum 1 server sent clock update reply to the + this peer server." + ::= { juniNtpPeerEntry 14 } + +juniNtpPeerRootTimeUpdateServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IP address of the stratum 1 server last updated the peer server." + ::= { juniNtpPeerEntry 15 } + +juniNtpPeerReceiveTime OBJECT-TYPE + SYNTAX JuniNtpTimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the peer server is either broadcast or multicast server, this will + represent time stamp at which NTP client received the broadcast message. + If it is unicast server, it represents the time stamp at which the peer + has sent the response to the NTP client poll message." + ::= { juniNtpPeerEntry 16 } + +juniNtpPeerTransmitTime OBJECT-TYPE + SYNTAX JuniNtpTimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the peer server is either broadcast or multicast server, this will + represent time stamp at which peer sent the broadcast message. If it is + unicast server, it represents the time stamp at which the NTP client has + received response from the peer." + ::= { juniNtpPeerEntry 17 } + +juniNtpPeerRequestTime OBJECT-TYPE + SYNTAX JuniNtpTimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For unicast server, it represents the time stamp at which the system + client sent NTP request to the peer." + ::= { juniNtpPeerEntry 18 } + +juniNtpPeerPrecision OBJECT-TYPE + SYNTAX JuniNtpClockSignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Length of the clock tick (interrupt interval) of the server's clock." + ::= { juniNtpPeerEntry 19 } + +juniNtpPeerLastUpdateTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the seconds since the last update from the NTP server" + ::= { juniNtpPeerEntry 20 } +-- +-- NTP peer filter register table +-- Note: There will one table instance for each peer server associated with +-- the NTP client on the system. +juniNtpPeerFilterRegisterTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniNtpPeerFilterRegisterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The following table contains NTP state variables used by the NTP clock + filter and selection algorithms. This table depicts a shift register. + Each stage in the shift register is a 3-tuple consisting of the measured + clock offset, measured clock delay and measured clock dispersion + associated with a single observation. + + The NTP clock-filter and selection algorithms are designed to minimize + the error in the calculated time by using the objects values in the + filter table." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + ::= { juniNtpPeers 3 } + +juniNtpPeerFilterRegisterEntry OBJECT-TYPE + SYNTAX JuniNtpPeerFilterRegisterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry corresponds to one stage of the shift register and reading + one set of values clock delay, clock offset and clock dispersion. + + Entries are automatically created whenever a peer is configured and + deleted when the peer is removed." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + INDEX { juniNtpPeerCfgIpAddress, + juniNtpPeerFilterIndex } + ::= { juniNtpPeerFilterRegisterTable 1 } + +JuniNtpPeerFilterRegisterEntry ::= SEQUENCE { + juniNtpPeerFilterIndex Unsigned32, + juniNtpPeerFilterOffset JuniNtpClockSignedTime, + juniNtpPeerFilterDelay JuniNtpClockSignedTime, + juniNtpPeerFilterDispersion JuniNtpClockUnsignedTime } + +juniNtpPeerFilterIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An integer value in the specified range that is used to index into the + table. The size of the table is fixed at 8. Each entry identifies a + particular reading of the clock filter variables in the shift register. + + Entries are added starting at index 1. The index wraps back to 1 when + it reaches 8. When the index wraps back, the new entries will overwrite + the old entries effectively deleting the old entry." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + ::= { juniNtpPeerFilterRegisterEntry 1 } + +juniNtpPeerFilterOffset OBJECT-TYPE + SYNTAX JuniNtpClockSignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The offset of the peer clock relative to the system clock in seconds." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + ::= { juniNtpPeerFilterRegisterEntry 2 } + +juniNtpPeerFilterDelay OBJECT-TYPE + SYNTAX JuniNtpClockSignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Roundtrip delay of the peer clock relative to the system clock over the + network path between them, in seconds. This variable can take on both + positive and negative values, depending on clock precision and + skew-error accumulation." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" + ::= { juniNtpPeerFilterRegisterEntry 3 } + +juniNtpPeerFilterDispersion OBJECT-TYPE + SYNTAX JuniNtpClockUnsignedTime + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum error of the peer clock relative to the system clock over + the network path between them, in seconds. Only positive values greater + than zero are possible." + REFERENCE + "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" +::= { juniNtpPeerFilterRegisterEntry 4 } + + +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- NTP router access group options +-- +-- Order of the access group scanning done from least restrictive to +-- most restrive in following order: +-- 1. Peer - Allows time requests and NTP control queries and +-- allows the system to synchrozise itself to a system +-- whose address passes the access list criteria. +-- 2. Serve - Allows time requests and NTP control queries and, but +-- does not allow the system to synchronize itself to +-- a system whose address passes the access list criteria. +-- 3. Serve only - Allows only time requests from a system whose address +-- passes the access list criteria. +-- 4. Query only - Allows only NTP control queries from a system whose +-- address passes the access list criteria." +-- ///////////////////////////////////////////////////////////////////////////// + +juniNtpRouterAccessGroupPeer OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the name of the peer access list for the NTP enabled router." + ::= { juniNtpAccessGroup 1 } + +juniNtpRouterAccessGroupServe OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the name of the serve access list for the NTP enabled + router." + ::= { juniNtpAccessGroup 2 } + +juniNtpRouterAccessGroupServeOnly OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the name of the serve-only access list for the NTP enabled + router." + ::= { juniNtpAccessGroup 3 } + +juniNtpRouterAccessGroupQueryOnly OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the name of the peer query-only list for the NTP enabled + router." + ::= { juniNtpAccessGroup 4 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Notifications +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniNtpTraps OBJECT IDENTIFIER ::= { juniNtpObjects 0 } + +juniNtpFrequencyCalibrationStart NOTIFICATION-TYPE + OBJECTS { + juniNtpSysClockFrequencyError } + STATUS current + DESCRIPTION + "This trap will be generated at the start of frequency synchronization." + ::= { juniNtpTraps 1 } + +juniNtpFrequencyCalibrationEnd NOTIFICATION-TYPE + OBJECTS { + juniNtpSysClockFrequencyError } + STATUS current + DESCRIPTION + "This trap will be generated when frequency synchronization completes + successfully." + ::= { juniNtpTraps 2 } + +juniNtpTimeSynUp NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "This trap indicates that some kind of time synchronization has started. + This trap will be generated at the start of time synchronization with + the configured time servers irrespective of whether time synchronization + is done with all the configured time servers or any one of them (there + may be reachability or other problems) when NTP is enabled on the + router." + ::= { juniNtpTraps 3 } + +juniNtpTimeSynDown NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "This trap will be generated when the NTP client is not able to time + synchronize with any of the configured time servers for any reasons when + NTP is enabled on the router." + ::= { juniNtpTraps 4 } + +juniNtpTimeServerSynUp NOTIFICATION-TYPE + OBJECTS { + juniNtpPeerCfgIsPreferred } + STATUS current + DESCRIPTION + "This trap will be generated to report the time synchronization status + of each configured time server on the router when it starts time + synchronization with the NTP client." + ::= { juniNtpTraps 5 } + +juniNtpTimeServerSynDown NOTIFICATION-TYPE + OBJECTS { + juniNtpPeerCfgIsPreferred } + STATUS current + DESCRIPTION + "This trap will be generated to report the time synchronization status + of each configured time server on the router when it stops time + synchronization with the NTP client for any reasons." + ::= { juniNtpTraps 6 } + +juniNtpFirstSystemClockSet NOTIFICATION-TYPE + OBJECTS { + juniNtpSysClockOffsetError, + juniNtpSysClockState } + STATUS current + DESCRIPTION + "This trap will be generated to report when the system clock offset + error is set for the first time from the good time sample taken, + enabling the time synchronization. This is usually the case after a + system reboot." + ::= { juniNtpTraps 7 } + +juniNtpClockOffSetLimitCrossed NOTIFICATION-TYPE + OBJECTS { + juniNtpSysClockOffsetError, + juniNtpSysClockState } + STATUS current + DESCRIPTION + "This trap will be generated whenever the system clock's offset error is + more than 15 minutes. This is an indication that something is not set + properly, since an offset of 15 minutes is not considered to be a normal + offset error compared to the accuracy of the time servers and system + clock. For example, it may indicate an improper setting of the + timezone." + ::= { juniNtpTraps 8 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Conformance information +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniSysClockConformance OBJECT IDENTIFIER ::= { juniSysClockMIB 3 } +juniSysClockCompliances OBJECT IDENTIFIER ::= { juniSysClockConformance 1 } +juniSysClockGroups OBJECT IDENTIFIER ::= { juniSysClockConformance 2 } + +-- +-- compliance statements +-- +juniSysClockCompliance MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "Obsolete compliance statement for entities that implement the Juniper + System Clock MIB. This statement became obsolete when NTP traps were + added." + MODULE -- this module + MANDATORY-GROUPS { + juniSysClockTimeGroup, + juniSysClockDstGroup, + juniNtpSysClockGroup, + juniNtpClientGroup, + juniNtpServerGroup, + juniNtpPeersGroup, + juniNtpAccessGroupGroup } + ::= { juniSysClockCompliances 1 } -- JUNOSe 4.0 + +juniSysClockCompliance2 MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "Obsolete compliance statement for entities that implement the Juniper + System Clock MIB. This statement became obsolete when new offset and + frequency error objects were added." + MODULE -- this module + MANDATORY-GROUPS { + juniSysClockTimeGroup, + juniSysClockDstGroup, + juniNtpSysClockGroup, + juniNtpClientGroup, + juniNtpServerGroup, + juniNtpPeersGroup, + juniNtpAccessGroupGroup, + juniNtpNotificationGroup } + ::= { juniSysClockCompliances 2 } -- JUNOSe 4.1 + +juniSysClockCompliance3 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities that implement the Juniper System + Clock MIB." + MODULE -- this module + MANDATORY-GROUPS { + juniSysClockTimeGroup, + juniSysClockDstGroup, + juniNtpSysClockGroup2, + juniNtpClientGroup, + juniNtpServerGroup, + juniNtpPeersGroup, + juniNtpAccessGroupGroup, + juniNtpNotificationGroup } + ::= { juniSysClockCompliances 3 } -- JUNOSe 4.1 + + +-- +-- units of conformance +-- +juniSysClockTimeGroup OBJECT-GROUP + OBJECTS { + juniSysClockDateAndTime, + juniSysClockTimeZoneName } + STATUS current + DESCRIPTION + "The management objects pertaining to the System Clock current date and + time." + ::= { juniSysClockGroups 1 } -- JUNOSe 4.0 + +juniSysClockDstGroup OBJECT-GROUP + OBJECTS { + juniSysClockDstName, + juniSysClockDstOffset, + juniSysClockDstStatus, + juniSysClockDstAbsoluteStartTime, + juniSysClockDstAbsoluteStopTime, + juniSysClockDstRecurStartMonth, + juniSysClockDstRecurStartWeek, + juniSysClockDstRecurStartDay, + juniSysClockDstRecurStartHour, + juniSysClockDstRecurStartMinute, + juniSysClockDstRecurStopMonth, + juniSysClockDstRecurStopWeek, + juniSysClockDstRecurStopDay, + juniSysClockDstRecurStopHour, + juniSysClockDstRecurStopMinute } + STATUS current + DESCRIPTION + "The management objects pertaining to the System Clock daylight savings + time information." + ::= { juniSysClockGroups 2 } -- JUNOSe 4.0 + +juniNtpSysClockGroup OBJECT-GROUP + OBJECTS { + juniNtpSysClockState, + juniNtpSysClockOffsetError, + juniNtpSysClockFrequencyError, + juniNtpSysClockRootDelay, + juniNtpSysClockRootDispersion, + juniNtpSysClockStratumNumber, + juniNtpSysClockLastUpdateTime, + juniNtpSysClockLastUpdateServer } + STATUS obsolete + DESCRIPTION + "Obsolete management objects pertaining to the system clock when NTP is + configured on the system. This group became obsolete when replacement + clock offset and frequency error objects with DisplaySting syntax were + added." + ::= { juniSysClockGroups 3 } -- JUNOSe 4.0 + +juniNtpClientGroup OBJECT-GROUP + OBJECTS { + juniNtpClientAdminStatus, + juniNtpClientSystemRouterIndex, + juniNtpClientPacketSourceIfIndex, + juniNtpClientBroadcastDelay, + + juniNtpClientIfDisable, + juniNtpClientIfIsBroadcastClient } + STATUS current + DESCRIPTION + "The management objects pertaining to the NTP client group." + ::= { juniSysClockGroups 4 } -- JUNOSe 4.0 + +juniNtpServerGroup OBJECT-GROUP + OBJECTS { + juniNtpServerAdminStatus, + juniNtpServerStratumNumber } + STATUS current + DESCRIPTION + "The management objects pertaining to the NTP server group." + ::= { juniSysClockGroups 5 } -- JUNOSe 4.0 + +juniNtpPeersGroup OBJECT-GROUP + OBJECTS { + juniNtpPeerState, + juniNtpPeerStratumNumber, + juniNtpPeerAssociationMode, + juniNtpPeerBroadcastInterval, + juniNtpPeerPolledInterval, + juniNtpPeerPollingInterval, + juniNtpPeerDelay, + juniNtpPeerDispersion, + juniNtpPeerOffsetError, + juniNtpPeerReachability, + juniNtpPeerPrecision, + juniNtpPeerRootDelay, + juniNtpPeerRootDispersion, + juniNtpPeerRootSyncDistance, + juniNtpPeerRootTime, + juniNtpPeerRootTimeUpdateServer, + juniNtpPeerReceiveTime, + juniNtpPeerTransmitTime, + juniNtpPeerRequestTime, + juniNtpPeerFilterOffset, + juniNtpPeerFilterDelay, + juniNtpPeerFilterDispersion, + juniNtpPeerCfgNtpVersion, + juniNtpPeerCfgPacketSourceIfIndex, + juniNtpPeerCfgIsPreferred, + juniNtpPeerCfgRowStatus } + STATUS obsolete + DESCRIPTION + "The management objects pertaining to the NTP peers group." + ::= { juniSysClockGroups 6 } -- JUNOSe 4.0 + +juniNtpAccessGroupGroup OBJECT-GROUP + OBJECTS { + juniNtpRouterAccessGroupPeer, + juniNtpRouterAccessGroupServe, + juniNtpRouterAccessGroupServeOnly, + juniNtpRouterAccessGroupQueryOnly } + STATUS current + DESCRIPTION + "The management objects pertaining to the NTP per router access group." + ::= { juniSysClockGroups 7 } -- JUNOSe 4.0 + +juniNtpNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { + juniNtpFrequencyCalibrationStart, + juniNtpFrequencyCalibrationEnd, + juniNtpTimeSynUp, + juniNtpTimeSynDown, + juniNtpTimeServerSynUp, + juniNtpTimeServerSynDown, + juniNtpFirstSystemClockSet, + juniNtpClockOffSetLimitCrossed } + STATUS current + DESCRIPTION + "The management notifications pertaining to NTP state changes." + ::= { juniSysClockGroups 8 } -- JUNOSe 4.1 + +juniNtpSysClockGroup2 OBJECT-GROUP + OBJECTS { + juniNtpSysClockState, + juniNtpSysClockRootDelay, + juniNtpSysClockRootDispersion, + juniNtpSysClockStratumNumber, + juniNtpSysClockLastUpdateTime, + juniNtpSysClockLastUpdateServer, + juniNtpSysClockOffsetErrorNew, + juniNtpSysClockFrequencyErrorNew } + STATUS current + DESCRIPTION + "The management objects pertaining to the system clock when NTP is + configured on the system." + ::= { juniSysClockGroups 9 } -- JUNOSe 4.1 + +juniNtpSysClockDeprecatedGroup OBJECT-GROUP + OBJECTS { + juniNtpSysClockOffsetError, + juniNtpSysClockFrequencyError } + STATUS deprecated + DESCRIPTION + "Deprecated management objects pertaining to the system clock when NTP + is configured on the system." + ::= { juniSysClockGroups 10 } -- JUNOSe 4.1 + +juniNtpPeersGroup1 OBJECT-GROUP + OBJECTS { + juniNtpPeerState, + juniNtpPeerStratumNumber, + juniNtpPeerAssociationMode, + juniNtpPeerBroadcastInterval, + juniNtpPeerPolledInterval, + juniNtpPeerPollingInterval, + juniNtpPeerDelay, + juniNtpPeerDispersion, + juniNtpPeerOffsetError, + juniNtpPeerReachability, + juniNtpPeerPrecision, + juniNtpPeerRootDelay, + juniNtpPeerRootDispersion, + juniNtpPeerRootSyncDistance, + juniNtpPeerRootTime, + juniNtpPeerRootTimeUpdateServer, + juniNtpPeerReceiveTime, + juniNtpPeerTransmitTime, + juniNtpPeerRequestTime, + juniNtpPeerFilterOffset, + juniNtpPeerFilterDelay, + juniNtpPeerFilterDispersion, + juniNtpPeerCfgNtpVersion, + juniNtpPeerCfgPacketSourceIfIndex, + juniNtpPeerCfgIsPreferred, + juniNtpPeerCfgRowStatus, + juniNtpPeerLastUpdateTime } + STATUS current + DESCRIPTION + "The management objects pertaining to the NTP peers group." + ::= { juniSysClockGroups 11 } -- JUNOSe 7.0 + +END |