diff options
Diffstat (limited to 'MIBS/junose/Juniper-UNI-IF-MIB')
| -rw-r--r-- | MIBS/junose/Juniper-UNI-IF-MIB | 440 |
1 files changed, 440 insertions, 0 deletions
diff --git a/MIBS/junose/Juniper-UNI-IF-MIB b/MIBS/junose/Juniper-UNI-IF-MIB new file mode 100644 index 0000000..8649931 --- /dev/null +++ b/MIBS/junose/Juniper-UNI-IF-MIB @@ -0,0 +1,440 @@ + +-- ***************************************************************************** +-- Juniper-UNI-IF-MIB +-- +-- Juniper Networks Enterprise MIB +-- Interfaces MIB +-- +-- Copyright (c) 1998 Redstone Communications, Inc. +-- Copyright (c) 1999, 2002 Unisphere Networks, Inc. +-- Copyright (c) 2003 Juniper Networks, Inc. +-- Copyright (c) 2004 Juniper Networks, Inc. +-- All Rights Reserved. +-- ***************************************************************************** + +Juniper-UNI-IF-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, RowStatus + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + ifEntry, ifStackHigherLayer, ifStackLowerLayer + FROM IF-MIB + juniMibs + FROM Juniper-MIBs; + +juniIfMIB MODULE-IDENTITY + LAST-UPDATED "200510112040Z" -- 11-Oct-05 04:40 PM EDT + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Networks, Inc. + Postal: 10 Technology Park Drive + Westford, MA 01886-3146 + USA + Tel: +1 978 589 5800 + E-mail: mib@Juniper.net" + DESCRIPTION + "The Generic Interfaces MIB for the Juniper Networks + enterprise." + -- Revision History + REVISION "200510112040Z" -- 11-Oct-05 04:40 PM EDT - JUNOSe 7.1 + DESCRIPTION + "Added interface type: + plsL2ShimInterface(45) " + REVISION "200307162140Z" -- 16-Jul-03 05:40 PM EDT - JUNOSe 5.1 + DESCRIPTION + "Added interface type: + atmActiveSubInterface(257) " + REVISION "200302061557Z" -- 06-Feb-03 10:57 AM EST - JUNOSe 5.0 + DESCRIPTION + "Replaced Unisphere names with Juniper names. + Added interface types: + bridgeInterface(48), + ipsecTransportInterface(49), + ipv6Interface(50), + ipv6TunnelInterface(51), + ipv6Loopback(52), + osi(53), + atmVirtualCircuit(145), + pppLink(256) " + REVISION "200201221652Z" -- 22-Jan-02 11:52 AM EST - JUNOSe 4.0 + DESCRIPTION + "Added interface types: + gtpInterface(37), + smdsMajorInterface(38), + smdsSubInterface(39), + ipsecInterface(43), + sgInterface(44), + lacGenInterface(47) " + REVISION "200103281512Z" -- 28-Mar-01 10:12 AM EST - JUNOSe 3.2 + DESCRIPTION + "Added interface types: + l2fTunnelInterface(40), + l2fSessionInterface(41), + l2fDestinationInterface(42) " + REVISION "200011222341Z" -- 22-Nov-00 06:41 PM EST - JUNOSe 3.1 + DESCRIPTION + "Added interface types: + vlanMajorInterface(34), + vlanSubInterface(35), + cbfInterface(36) " + REVISION "200009291835Z" -- 29-Sep-00 02:35 PM EDT - JUNOSe 3.0 + DESCRIPTION + "Added interface types: + multilinkFrameRelayInterface(29), + ipTunnelInterface(30), + serverPortInterface(31), + smdsInterface(32) " + REVISION "200007271545Z" -- 27-Jul-00 11:45 AM EDT - JUNOSe 2.2 + DESCRIPTION + "Added interface type: + sonetVTInterface(33) " + REVISION "200005051508Z" -- 05-May-00 11:08 AM EDT - JUNOSe 2.0 + DESCRIPTION + "Added interface types: + l2tpSessionInterface(21), + mlPppLinkInterface(22), + l2tpDestinationInterface(24), + mplsMajorInterface(25), + mplsMinorInterface(26), + mlPppNetworkInterface(27), + ethernetSubInterface(28) " + REVISION "199912211518Z" -- 21-Dec-99 10:18 AM EST - JUNOSe 1.3 + DESCRIPTION + "Added interface types: + bridgedEthernet(19), + l2TpTunnelInterface(20), + slepInterface(23) " + REVISION "199909031416Z" -- 03-Sep-99 10:16 AM EDT - JUNOSe 1.1 + DESCRIPTION + "Added interface types: + pppoe(17), + pppoeSubInterface(18) " + REVISION "9811132019Z" -- 13-Nov-98 03:19 PM EST - JUNOSe 1.0 + DESCRIPTION + "Initial version of this MIB module." + ::= { juniMibs 3 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Textual conventions +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- +-- Interface types. +-- +JuniIfType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Interface type identification for physical-, link-, and + network-layer interfaces." + SYNTAX INTEGER { + ip(0), + ppp(1), + ds0(2), + ds1(3), + ds3(4), + frameRelay(5), + ethernet(6), + sonet(7), + sonetPath(8), + atm(9), + aal5(10), + atmSubInterface(11), + ft1(12), + hdlc(13), + ipLoopback(14), + ipVirtual(15), + frSubInterface(16), + pppoe(17), + pppoeSubInterface(18), + bridgedEthernet(19), + l2tpTunnelInterface(20), + l2tpSessionInterface(21), + mlPppLinkInterface(22), + slepInterface(23), + l2tpDestinationInterface(24), + mplsMajorInterface(25), + mplsMinorInterface(26), + mlPppNetworkInterface(27), + ethernetSubInterface(28), + multilinkFrameRelayInterface(29), + ipTunnelInterface(30), + serverPortInterface(31), + smdsInterface(32), + sonetVTInterface(33), + vlanMajorInterface(34), + vlanSubInterface(35), + cbfInterface(36), + gtpInterface(37), + smdsMajorInterface(38), + smdsSubInterface(39), + l2fTunnelInterface(40), + l2fSessionInterface(41), + l2fDestinationInterface(42), + ipsecInterface(43), + sgInterface(44), + mplsL2ShimInterface(45), + lacGenInterface(47), + bridgeInterface(48), + ipsecTransportInterface(49), + ipv6Interface(50), + ipv6TunnelInterface(51), + ipv6Loopback(52), + osi(53), + lag(54), + ipTunnelMdt(55), + -- multi-personality and pseudo interfaces + atmVirtualCircuit(145), + pppLink(256), + atmActiveSubInterface(257) } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Managed objects +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniInterfaces OBJECT IDENTIFIER ::= { juniIfMIB 1 } +juniIf OBJECT IDENTIFIER ::= { juniInterfaces 1 } +juniIfObjects OBJECT IDENTIFIER ::= { juniIf 1 } + +-- +-- Generic Interfaces Table +-- +juniIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains a corresponding entry for each entry found in the + standard Generic Interfaces MIB ifTable/ifXTable. The entries in this + table contain supplementary generic interface characteristics. + + Entries in ifTable/ifXTable and in this table are created/deleted as a + consequence of hardware detection, or of management configuration via + standard or enterprise type-specific interface MIBs." + ::= { juniIfObjects 1 } + +juniIfEntry OBJECT-TYPE + SYNTAX JuniIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry representing an interface's enterprise-defined generic + interface characteristics." + AUGMENTS { ifEntry } + ::= { juniIfTable 1 } + +JuniIfEntry ::= SEQUENCE { + juniIfType JuniIfType } + +juniIfType OBJECT-TYPE + SYNTAX JuniIfType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Identifies the type of this interface." + ::= { juniIfEntry 1 } + +-- +-- Inverse Stack Table +-- +-- Similar to IF-MIB ifStackTable, but with inverted indexing +-- order of upper/lower layer interfaces: ifStackTable provides +-- <upper, lower> index ordering, this table provides <lower, upper> +-- index ordering. +-- +-- This table facilitates efficient bottom-up GetNext traversal of interface +-- layers, in contrast to the efficient top-down GetNext traversal afforded +-- by IF-MIB ifStackTable. +-- +-- This MIB table design is derived from the IETF Internet Draft +-- draft-ietf-ifmib-invstackmib-00.txt, "The Inverted Stack Table Extension +-- to the Interfaces Group MIB", McCloghrie & Hanson, July 16 1998. +-- The table definition below is an interim solution, subject to +-- deprecation in favor of a standard solution should the Internet Draft +-- advance to Proposed Standard status. +-- +juniIfInvStackTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIfInvStackEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing information on the relationships between the + multiple sub-layers of network interfaces. In particular, it contains + information on which sub-layers run 'underneath' which other sub-layers, + where each sub-layer corresponds to a conceptual row in the ifTable. + For example, when the sub-layer with ifIndex value x runs underneath the + sub-layer with ifIndex value y, then this table contains: + + juniIfInvStackStatus.x.y = active + + For each ifIndex value, I, which identifies an active interface, there + are always at least two instantiated rows in this table associated with + I. For one of these rows, I is the value of ifStackHigherLayer; for the + other, I is the value of ifStackLowerLayer. (If I is not involved in + multiplexing, then these are the only two rows associated with I.) + + For example, two rows exist even for an interface which has no others + stacked on top or below it: + + ifStackStatus.x.0 = active + ifStackStatus.0.x = active + + This table contains exactly the same number of rows as the ifStackTable, + but the rows appear in a different order." + ::= { juniIfObjects 2 } + +juniIfInvStackEntry OBJECT-TYPE + SYNTAX JuniIfInvStackEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information on a particular relationship between two sub-layers, + specifying that one sub-layer runs underneath the other sub-layer. Each + sub-layer corresponds to a conceptual row in the ifTable." + INDEX { ifStackLowerLayer, + ifStackHigherLayer } + ::= { juniIfInvStackTable 1 } + +JuniIfInvStackEntry ::= SEQUENCE { + juniIfInvStackStatus RowStatus } + +juniIfInvStackStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the relationship between two sub-layers. + + An instance of this object exists for each instance of the ifStackStatus + object, and vice versa. For example, if the variable ifStackStatus.H.L + exists, then the variable juniIfInvStackStatus.L.H must also exist, and + vice versa. In addition, the two variables always have the same value. + + However, unlike ifStackStatus, the juniIfInvStackStatus object is NOT + write-able. A network management application wishing to change a + relationship between sub-layers H and L cannot do so by modifying the + value of juniIfInvStackStatus.L.H, but must instead modify the value of + ifStackStatus.H.L. After the ifStackTable is modified, the change will + be reflected in this table." + ::= { juniIfInvStackEntry 1 } + +-- +-- Interfaces Count Table +-- +juniIfCountTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIfCountEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for each interface type's system wide + interfaces counts." + ::= { juniIfObjects 3 } + +juniIfCountEntry OBJECT-TYPE + SYNTAX JuniIfCountEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry represents system wide total number of interfaces configured + for the particular interface type." + INDEX { juniIfCountIfType } + ::= { juniIfCountTable 1 } + +JuniIfCountEntry ::= SEQUENCE { + juniIfCountIfType JuniIfType, + juniIfCountNumberOfInterfaces Unsigned32 } + +juniIfCountIfType OBJECT-TYPE + SYNTAX JuniIfType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Identifies the type of this interface." + ::= { juniIfCountEntry 1 } + +juniIfCountNumberOfInterfaces OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents system wide total number of interfaces configured for the + particular interface type." + ::= { juniIfCountEntry 2 } + + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Notifications +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- No notifications are defined in this MIB. Placeholders follow. +-- juniIfTraps OBJECT IDENTIFIER ::= { juniIf 3 } +-- juniIfTrapPrefix OBJECT IDENTIFIER ::= { juniIfTraps 0 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Conformance information +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniIfConformance OBJECT IDENTIFIER ::= { juniIf 4 } +juniIfCompliances OBJECT IDENTIFIER ::= { juniIfConformance 1 } +juniIfGroups OBJECT IDENTIFIER ::= { juniIfConformance 2 } + +-- +-- compliance statements +-- +juniIfCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Obsolete compliance statement for entities which implement the Juniper + Generic Interfaces MIB." + MODULE -- this module + MANDATORY-GROUPS { + juniIfGroup, + juniIfInvStackGroup } + ::= { juniIfCompliances 1 } -- JUNOSe 1.0 + +juniIfCompliance1 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities which implement the Juniper + Generic Interfaces MIB." + MODULE -- this module + MANDATORY-GROUPS { + juniIfGroup, + juniIfInvStackGroup, + juniIfCountGroup } + ::= { juniIfCompliances 2 } -- JUNOSe 6.0 + +-- +-- units of conformance +-- +juniIfGroup OBJECT-GROUP + OBJECTS { + juniIfType } + STATUS current + DESCRIPTION + "A collection of objects for managing generic interfaces in a Juniper + product." + ::= { juniIfGroups 1 } -- JUNOSe 1.0 + +juniIfInvStackGroup OBJECT-GROUP + OBJECTS { + juniIfInvStackStatus } + STATUS current + DESCRIPTION + "A collection of objects providing inverted information on the layering + of MIB-II interfaces." + ::= { juniIfGroups 2 } -- JUNOSe 1.0 + +juniIfCountGroup OBJECT-GROUP + OBJECTS { + juniIfCountNumberOfInterfaces } + STATUS current + DESCRIPTION + "A collection of objects providing interface information on the system + wide count of number of interfaces per interface type." + ::= { juniIfGroups 3 } -- JUNOSe 6.0 + +END |