diff options
Diffstat (limited to 'MIBS/microsemi/MICROSEMI-PDSINE-MIB')
| -rw-r--r-- | MIBS/microsemi/MICROSEMI-PDSINE-MIB | 402 |
1 files changed, 402 insertions, 0 deletions
diff --git a/MIBS/microsemi/MICROSEMI-PDSINE-MIB b/MIBS/microsemi/MICROSEMI-PDSINE-MIB new file mode 100644 index 0000000..946cea8 --- /dev/null +++ b/MIBS/microsemi/MICROSEMI-PDSINE-MIB @@ -0,0 +1,402 @@ +-- PoE Private MIB Ver 2.0
+
+MICROSEMI-PDSINE-MIB
+DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Integer32,
+ Gauge32, Counter32, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+ TruthValue
+ FROM SNMPv2-TC
+ enterprises
+ FROM RFC1155-SMI;
+
+
+polPowerOverLan MODULE-IDENTITY
+
+ LAST-UPDATED "201111150000Z" -- Nov 15, 2011
+ ORGANIZATION ""
+ CONTACT-INFO ""
+ DESCRIPTION ""
+
+ ::= {enterprises 7428 }
+
+-- MIB ObjID entery
+ products OBJECT IDENTIFIER ::= { polPowerOverLan 1}
+ description OBJECT IDENTIFIER ::= { products 1 }
+ sysObjectID OBJECT IDENTIFIER ::= { description 1 }
+ pseDevice OBJECT IDENTIFIER ::= { products 2 }
+ portObjects OBJECT IDENTIFIER ::= { pseDevice 1 }
+ mainObjects OBJECT IDENTIFIER ::= { pseDevice 2 }
+ poeNotifications OBJECT IDENTIFIER ::= { products 3 }
+
+
+-- SysObjID Products list
+ midspanUnknown OBJECT IDENTIFIER ::= {sysObjectID 1}
+ midspan6portAC OBJECT IDENTIFIER ::= {sysObjectID 2}
+ midspan6portACDC OBJECT IDENTIFIER ::= {sysObjectID 3}
+ midspan12portAC OBJECT IDENTIFIER ::= {sysObjectID 4}
+ midspan12portACDC OBJECT IDENTIFIER ::= {sysObjectID 5}
+ midspan24portAC OBJECT IDENTIFIER ::= {sysObjectID 6}
+ midspan24portACDC OBJECT IDENTIFIER ::= {sysObjectID 7}
+ midspan48portAC OBJECT IDENTIFIER ::= {sysObjectID 8}
+ midspan48portACDC OBJECT IDENTIFIER ::= {sysObjectID 9}
+ midspan6portHPAC OBJECT IDENTIFIER ::= {sysObjectID 10}
+ midspan6portHPACDC OBJECT IDENTIFIER ::= {sysObjectID 11}
+ midspan12portHPAC OBJECT IDENTIFIER ::= {sysObjectID 12}
+ midspan12portHPACDC OBJECT IDENTIFIER ::= {sysObjectID 13}
+ midspanGigabit6portAC OBJECT IDENTIFIER ::= {sysObjectID 14}
+ midspanGigabit12portAC OBJECT IDENTIFIER ::= {sysObjectID 15}
+ midspanGigabit24portAC OBJECT IDENTIFIER ::= {sysObjectID 16}
+ midspanHiPoEGigabit6portAC OBJECT IDENTIFIER ::= {sysObjectID 17}
+ midspanHiPoEGigabit12portAC OBJECT IDENTIFIER ::= {sysObjectID 18}
+ midspanHiPoEGigabit24portAC OBJECT IDENTIFIER ::= {sysObjectID 19}
+ midspanHiPoEATGigabit6portAC OBJECT IDENTIFIER ::= {sysObjectID 20}
+ midspanHiPoEATGigabit12portACDC OBJECT IDENTIFIER ::= {sysObjectID 21}
+ midspanHiPoEATGigabit24portACDC OBJECT IDENTIFIER ::= {sysObjectID 22}
+ midspan4PairATGigabit6portACDC OBJECT IDENTIFIER ::= {sysObjectID 23}
+ midspan4PairATGigabit12portACDC OBJECT IDENTIFIER ::= {sysObjectID 24}
+ midspanHiPoEATGigabit6portDC OBJECT IDENTIFIER ::= {sysObjectID 25}
+ midspanHiPoEATGigabit12portDC OBJECT IDENTIFIER ::= {sysObjectID 26}
+ midspanHiPoEATGigabit24portDC OBJECT IDENTIFIER ::= {sysObjectID 27}
+ midspan4PairATGigabit24portACDC OBJECT IDENTIFIER ::= {sysObjectID 28}
+ midspanEEPoEGigabit24portACDC OBJECT IDENTIFIER ::= {sysObjectID 29}
+ midspanPoHGigabit6portACDC OBJECT IDENTIFIER ::= {sysObjectID 30}
+ midspanPoHGigabit12portACDC OBJECT IDENTIFIER ::= {sysObjectID 31}
+ midspanPoHGigabit24portACDC OBJECT IDENTIFIER ::= {sysObjectID 32}
+
+
+
+
+-- PSE Port Objects
+
+ portTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of objects that display and control the power
+ characteristics of power Ethernet ports on a Power Source
+ Entity (PSE) device. This group will be implemented in
+ managed power Ethernet switches and mid-span devices.
+ Values of all read-write objects in this table are
+ persistent at restart/reboot."
+ ::= { portObjects 1 }
+
+ portEntry OBJECT-TYPE
+ SYNTAX PortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of objects that display and control the power
+ characteristics of a power Ethernet PSE port."
+ INDEX { portGroupIndex , portIndex }
+ ::= { portTable 1 }
+
+ PortEntry ::= SEQUENCE {
+ portGroupIndex
+ Integer32,
+ portIndex
+ Integer32,
+ portConsumptionPower
+ Gauge32,
+ portMaxPower
+ Integer32,
+ portType
+ INTEGER
+ }
+
+ portGroupIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This variable uniquely identifies the group
+ containing the port to which a power Ethernet PSE is
+ connected. Group means box in the stack, module in a
+ rack and the value 1 MUST be used for non-modular devices."
+ ::= { portEntry 1 }
+
+ portIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This variable uniquely identifies the power Ethernet PSE
+ port within group portGroupIndex to which the
+ power Ethernet PSE entry is connected."
+ ::= { portEntry 2 }
+
+ portConsumptionPower OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "Watt"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value indicates the measured usage power expressed in Watts for a specific port "
+ ::= { portEntry 3 }
+
+ portMaxPower OBJECT-TYPE
+ SYNTAX Integer32 (1..99)
+ UNITS "Watt"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Read/Write maximum power consumption that PD device may consume in Watts
+ NOTE:
+ 1. For Midspan 60xx,60xxG,6500 series, Max PD power consumption = 17Watt
+ 2. For Midspan 70xxG series, Max PD power consumption = 30Watt
+ 3 .For Midspan 80xx series, this parameter is read-only !!
+ 4. For Midspan 90xxG series, Max PD power consumption = 30/36Watt
+ 5. For Midspan 95xxG series, Max PD power consumption = 60/72Watt (four pair) or 30/36Watt (two pair)
+ 6. For Midspan 55xxG series, Max PD power consumption = 30/36Watt"
+ ::= { portEntry 4 }
+
+ portType OBJECT-TYPE
+ SYNTAX INTEGER {
+ twopair(1),
+ fourpair(2),
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/Disable Four-pair/EEPoE PoE
+ Read : Applicable to all Midspan series
+ Write: Applicable only to 95xxG/55xxG Midspan series
+ twopair (1) Two-pair PoE port capable of providing up to 16.8Watt or 30-36Watt.
+ fourpair (2) Four-pair/EEPoE-mode PoE port capable of providing up to 60-72Watt (95xxG) or 30-36W (55xxG)."
+ ::= { portEntry 5 }
+
+
+-- PSE Main Objects
+
+ mainPseTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MainPseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of objects that display and control attributes
+ of the main PSE device."
+ ::= { mainObjects 1 }
+
+ mainPseEntry OBJECT-TYPE
+ SYNTAX MainPseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of objects that display and control the Main PSE device."
+ INDEX { pethMainPseGroupIndex }
+ ::= { mainPseTable 1 }
+
+ MainPseEntry ::= SEQUENCE {
+ mainGroupIndex
+ Integer32,
+ mainVoltage
+ Gauge32 ,
+ mainDetectionMethod
+ INTEGER,
+ mainPowerUsageBudget
+ Integer32,
+ mainPSEMaxPower
+ Gauge32,
+ highPowerLegacyPDSupport
+ INTEGER,
+ highPowerExtendedPortPower
+ INTEGER,
+ powerBackupStatus
+ INTEGER,
+ internalPowerSourceStatus
+ INTEGER,
+ externalPowerSourceStatus
+ INTEGER,
+ temperature
+ INTEGER,
+ temperatureformat
+ INTEGER
+ }
+
+ mainGroupIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This variable uniquely identifies the group to which
+ power Ethernet PSE is connected. Group means (box in
+ the stack, module in a rack) and the value 1 MUST be
+ used for non-modular devices."
+ ::= { mainPseEntry 1 }
+
+ mainVoltage OBJECT-TYPE
+ SYNTAX Gauge32 (1..65535)
+ UNITS "Volt"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power Supply Voltage in Volt."
+ ::= { mainPseEntry 2 }
+
+ mainDetectionMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ ieee8023afat(1),
+ ieee8023afatandlegacy(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Read/Write PD device detection method (802.3af / 802.3af+Legacy)."
+ ::= { mainPseEntry 3 }
+
+ mainPowerUsageBudget OBJECT-TYPE
+ SYNTAX Integer32 (10..100)
+ UNITS "%"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allow external SNMP manager to limit maximum power that all PD's may consume
+ Whenever total power consumption exceeds maximum power, Midspan may turn off
+ automatically Low priority and High priority PSE ports.
+ Percentage Value refers to Midspan maximum power."
+ ::= { mainPseEntry 4 }
+
+ mainPSEMaxPower OBJECT-TYPE
+ SYNTAX Gauge32 (1..65535)
+ UNITS "Watts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum power that Midspan can provide (Watt), after including power budget percentage limitation.
+ Example: Midspan maximum power without power limit = 860Watt, and Power Limit = 50%
+ mainPSEMaxPower = 430Watt"
+ ::= { mainPseEntry 5 }
+
+ highPowerLegacyPDSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2),
+ notsupported(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Applicable only for Midspan 90xxG series
+ enable (1) - Power Cisco 125x access point (pre 802.3at legacy high power PD device).
+ disable(2) - Power only 802.3at compliant devices.
+ notsupported(3) - SNMP GET result for Midspan which doesn't support this feature"
+ ::= { mainPseEntry 6 }
+
+ highPowerExtendedPortPower OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2),
+ notsupported(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Applicable only for Midspan 90xxG/55xxG series
+ enable (1) - Extend maximum power to PD device beyond 802.3at specification.
+ disable(2) - Maximum power to PD device per 802.3at specification.
+ notsupported(3) - SNMP GET result for Midspan which doesn't support this feature"
+ ::= { mainPseEntry 7 }
+
+ powerBackupStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ standalone(1),
+ powerbackupbyrps(2),
+ powerbackupbymidspan(3),
+ incompatiblepowerbackupdevice(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Applicable only for Midspan 90xxG/95xxG/55xxG series
+ standalone - Midspan isn't connected to any power backup device
+ powerbackupbyrps - Redundant power supply (RPS) backup Midspan device
+ powerbackupbymidspan - Two Midspan devices backup each other
+ incompatiblepowerbackupdevice - Midspan was connected to incompatible power backup device.
+ For example RPS 430Watt to Midspan 950Watt"
+
+ ::= { mainPseEntry 8 }
+
+ internalPowerSourceStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(1),
+ fail(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Applicable only for Midspan 90xxG/95xxG/55xxG series
+ ok(1) - Internal Power Source is OK
+ fail(2) - Internal Power Source failure"
+ ::= { mainPseEntry 9 }
+
+ externalPowerSourceStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(1),
+ fail(2),
+ notsupported(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Applicable only for Midspan 90xxG/95xxG/55xxG series
+ ok(1) - External Power Source is OK
+ fail(2) - External Power Source failure
+ notsupported(3) - SNMP GET result for Midspan which doesn't support this feature"
+ ::= { mainPseEntry 10 }
+
+ temperature OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "Degree"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Unit temperature - Applicable only for Midspan 95xxG series"
+ ::= { mainPseEntry 11 }
+
+ temperatureformat OBJECT-TYPE
+ SYNTAX INTEGER {
+ celcius(1),
+ fahrenheit(2),
+ notsupported(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Unit temperature format - Applicable only for Midspan 95xxG series
+ Celcius(1) - Report unit temperature in Celcius
+ Fahrenheit(2) - Report unit temperature in Fahrenheit
+ NotSupported(3) - No temperature sensor inside the Midspan unit"
+ ::= { mainPseEntry 12 }
+
+-- Notifications Section
+
+ powerBackupStatusNotification NOTIFICATION-TYPE
+ OBJECTS { powerBackupStatus }
+ STATUS current
+ DESCRIPTION
+ "Applicable only for Midspan 90xxG/95xxG/55xxG series
+ This Notification reports power backup status change, and whenever incompatible
+ power backup source is connected (as RPS 430Watt to Midspan 950Watt)"
+ ::= { poeNotifications 1 }
+
+ internalPowerSourceStatusNotification NOTIFICATION-TYPE
+ OBJECTS { internalPowerSourceStatus }
+ STATUS current
+ DESCRIPTION
+ "Applicable only for Midspan 90xxG/95xxG/55xxG series
+ This Notification reports internal Power Source failure"
+ ::= { poeNotifications 2 }
+
+ externalPowerSourceStatusNotification NOTIFICATION-TYPE
+ OBJECTS { externalPowerSourceStatus }
+ STATUS current
+ DESCRIPTION
+ "Applicable only for Midspan 90xxG/95xxG/55xxG series
+ This Notification reports external Power Source failure"
+ ::= { poeNotifications 3 }
+
+END
+
|