diff options
Diffstat (limited to 'MIBS/mimosa/MIMOSA-NETWORKS-PTMP-MIB')
| -rw-r--r-- | MIBS/mimosa/MIMOSA-NETWORKS-PTMP-MIB | 1036 |
1 files changed, 1036 insertions, 0 deletions
diff --git a/MIBS/mimosa/MIMOSA-NETWORKS-PTMP-MIB b/MIBS/mimosa/MIMOSA-NETWORKS-PTMP-MIB new file mode 100644 index 0000000..07f1937 --- /dev/null +++ b/MIBS/mimosa/MIMOSA-NETWORKS-PTMP-MIB @@ -0,0 +1,1036 @@ +MIMOSA-NETWORKS-PTMP-MIB DEFINITIONS ::= BEGIN + +-- Copyright (C) 2017, Mimosa Networks, Inc. All Rights Reserved. +-- +-- Mimosa Networks MIB +-- Revision: 0.3 +-- Date: April 05, 2017 +-- +-- Mimosa Networks, Inc. +-- 469 El Camino Real, Suite 100 +-- Santa Clara, CA 95050 +-- support@mimosa.co +-- +-- This MIB defines the MIB specification for Mimosa Network's Products +-- +-- Mimosa reserves the right to make changes to this MIB specification as +-- well as other information related to this specification without prior +-- notice. The user of this specification should consult Mimosa Networks, +-- to determine if any such changes have been made. +-- +-- Current MIBs are available from Mimosa Networks at the following URLs: +-- +-- http://help.mimosa.co +-- +-- In no event shall Mimosa Networks, Inc. be liable for any indirect, +-- consequential, special or incidental damages whatsoever (including +-- but not limited to lost profits or lost revenue) arising out of or +-- related to this specification or the information contained in it. +-- This non-liability extends to even if Mimosa Networks Inc. has been +-- advised of, known, or should have known, the potential for such damages. + +-- Mimosa Networks, Inc. hereby grants end-users, and other parties a +-- a non-exclusive license to use this MIB specification in order to +-- manage products of Mimosa Networks, Inc. + + +IMPORTS + OBJECT-TYPE, MODULE-IDENTITY, + IpAddress, Integer32, Counter64, + Unsigned32 FROM SNMPv2-SMI + + DisplayString, TruthValue, + MacAddress, TimeStamp FROM SNMPv2-TC + + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + + DecimalOne, DecimalTwo, + Mimosa5GHzFrequency, + Mimosa5GHzChannelNumber FROM MIMOSA-MIB-TC + + mimosaWireless, mimosaConformanceGroup FROM MIMOSA-NETWORKS-BASE-MIB; + + +-- ***************************************************************** +-- *** Mimosa PTMP variables are specified below. *** +-- ***************************************************************** + +mimosaPtmp MODULE-IDENTITY + LAST-UPDATED "201704050000Z" + ORGANIZATION "Mimosa Networks" + CONTACT-INFO + " + Postal: Mimosa Networks, Inc. + 469 El Camino Real, Suite 100 + Santa Clara, CA 95050 + US + + Tel: +1-408-628-1277 + + E-mail: inquiry@mimosa.co + " + DESCRIPTION + "The MIB module for Mimosa PTMP products" + REVISION "201704050000Z" + DESCRIPTION + "The first version of this MIB" + ::= { mimosaWireless 9 } + +mimosaPtmpSsid OBJECT IDENTIFIER ::= { mimosaPtmp 1 } +mimosaPtmpLinkInfo OBJECT IDENTIFIER ::= { mimosaPtmp 2 } +mimosaPtmpChannelPower OBJECT IDENTIFIER ::= { mimosaPtmp 3 } +mimosaPtmpApStats OBJECT IDENTIFIER ::= { mimosaPtmp 4 } +mimosaPtmpClientInfo OBJECT IDENTIFIER ::= { mimosaPtmp 5 } +mimosaPtmpClientStats OBJECT IDENTIFIER ::= { mimosaPtmp 6 } +mimosaPtmpMgmtInfo OBJECT IDENTIFIER ::= { mimosaPtmp 7 } + + +-- ************************************************************************* +-- *** Mimosa SSID Information variables are specified below. *** +-- ************************************************************************* + +mimosaPtmpSsidTable OBJECT-TYPE + SYNTAX SEQUENCE OF MimosaPtmpSsidEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of A5 SSID entries" + ::= { mimosaPtmpSsid 1 } + + +mimosaPtmpSsidEntry OBJECT-TYPE + SYNTAX MimosaPtmpSsidEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry that describes each SSID and all its related configuration" + INDEX { mimosaPtmpSsidIndex } + ::= { mimosaPtmpSsidTable 1 } + +MimosaPtmpSsidEntry ::= + SEQUENCE { + mimosaPtmpSsidIndex Integer32, + mimosaPtmpSsidName DisplayString, + mimosaPtmpSsidType INTEGER, + mimosaPtmpSsidEnabled TruthValue, + mimosaPtmpSsidBroadcastEnabled TruthValue, + mimosaPtmpSsidIsolationEnabled TruthValue + } + +mimosaPtmpSsidIndex OBJECT-TYPE + SYNTAX Integer32(1..24) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Describes the index used to access a particular entry in the SSID + table." + ::= { mimosaPtmpSsidEntry 1 } + +mimosaPtmpSsidName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the name of the SSID" + ::= { mimosaPtmpSsidEntry 2 } + +mimosaPtmpSsidType OBJECT-TYPE + SYNTAX INTEGER { + hotspot(0), + cpe(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the type of clients that will connect to this SSID. CPE + represents fixed, or Hotspot represents mobile devices" + ::= { mimosaPtmpSsidEntry 3 } + +mimosaPtmpSsidEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes if the SSID is enabled (True) or disabled (False)" + ::= { mimosaPtmpSsidEntry 4 } + +mimosaPtmpSsidBroadcastEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes if the Broadcast feature for this SSID is enabled or + disabled" + ::= { mimosaPtmpSsidEntry 5 } + +mimosaPtmpSsidIsolationEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes if the client isolation is enabled or disabled" + ::= { mimosaPtmpSsidEntry 6 } + + +-- ************************************************************************* +-- *** Mimosa PTMP Link Information variables are specified below. *** +-- ************************************************************************* + +mimosaPtmpWirelessMode OBJECT-TYPE + SYNTAX INTEGER { + srs (1), + wifiinterop (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the wireless protocol configured on the Mimosa Device" + ::= { mimosaPtmpLinkInfo 1 } + +mimosaPtmpWirelessGender OBJECT-TYPE + SYNTAX INTEGER { + a (1), + b (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the wireless protocol gender that defines the transmit + and receive timing" + ::= { mimosaPtmpLinkInfo 2 } + +mimosaPtmpWirelessTrafficSplit OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes how the bandwidth is split between the AP and Station" + ::= { mimosaPtmpLinkInfo 3 } + +mimosaPtmpWirelessWindowLength OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the length of the transmit time slot in milliseconds" + ::= { mimosaPtmpLinkInfo 4 } + +-- ************************************************************************* +-- *** Mimosa Radio Channel Power Information variables are specified . *** +-- ************************************************************************* + +mimosaPtmpAutoChannelEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes if the Auto Channel feature is Enabled or Disabled. This + function selects the channel that results in the best RF + performance." + ::= { mimosaPtmpChannelPower 1 } + +mimosaPtmpAntennaGain OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the antenna gain for connectorized version of the device. + Measured in dBi." + ::= { mimosaPtmpChannelPower 2 } + +mimosaPtmpChannelPowerTable OBJECT-TYPE + SYNTAX SEQUENCE OF MimosaPtmpChannelPowerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Channel and Power related information per radio." + ::= { mimosaPtmpChannelPower 3 } + +mimosaPtmpChannelPowerEntry OBJECT-TYPE + SYNTAX MimosaPtmpChannelPowerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing channel and power information" + INDEX { mimosaPtmpChPwrRadioIndex } + ::= { mimosaPtmpChannelPowerTable 1 } + +MimosaPtmpChannelPowerEntry ::= + SEQUENCE { + mimosaPtmpChPwrRadioIndex Unsigned32, + mimosaPtmpChPwrRadioName DisplayString, + mimosaPtmpChPwrCntrFreqCfg Mimosa5GHzFrequency, + mimosaPtmpChPwrPrimChannelCfg Mimosa5GHzChannelNumber, + mimosaPtmpChPwrChWidthCfg Unsigned32, + mimosaPtmpChPwrTxPowerCfg Integer32, + mimosaPtmpChPwrCntrFreqCur Mimosa5GHzFrequency, + mimosaPtmpChPwrPrimChannelCur Mimosa5GHzChannelNumber, + mimosaPtmpChPwrChWidthCur Unsigned32, + mimosaPtmpChPwrTxPowerCur Integer32, + mimosaPtmpChPwrAgcMode INTEGER, + mimosaPtmpChPwrMinRxPower Integer32 + } + +mimosaPtmpChPwrRadioIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Describes the index of the radio." + ::= { mimosaPtmpChannelPowerEntry 1 } + +mimosaPtmpChPwrRadioName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the name of the radio." + ::= { mimosaPtmpChannelPowerEntry 2 } + +mimosaPtmpChPwrCntrFreqCfg OBJECT-TYPE + SYNTAX Mimosa5GHzFrequency + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the configured center frequency of the channel used on the + access point. The center frequency represents the absolute center + of the selected channel width without any offset. Measured in MHz" + ::= { mimosaPtmpChannelPowerEntry 3 } + +mimosaPtmpChPwrPrimChannelCfg OBJECT-TYPE + SYNTAX Mimosa5GHzChannelNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the primary channel number that corresponds with the + operating frequency." + ::= { mimosaPtmpChannelPowerEntry 4 } + +mimosaPtmpChPwrChWidthCfg OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the channel width for access point operation: 20 MHz, + 40 MHz or 80 MHz" + ::= { mimosaPtmpChannelPowerEntry 5 } + +mimosaPtmpChPwrTxPowerCfg OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the desired transmit power level. The allowed options + are determined by a combination of country and chosen frequency. + Measured in dBm" + ::= { mimosaPtmpChannelPowerEntry 6 } + +mimosaPtmpChPwrCntrFreqCur OBJECT-TYPE + SYNTAX Mimosa5GHzFrequency + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the current center frequency of the channel used on the + access point. The center frequency represents the absolute center + of the selected channel width without any offset. Measured in MHz" + ::= { mimosaPtmpChannelPowerEntry 7 } + +mimosaPtmpChPwrPrimChannelCur OBJECT-TYPE + SYNTAX Mimosa5GHzChannelNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the current primary channel number that corresponds with the + operating frequency." + ::= { mimosaPtmpChannelPowerEntry 8 } + +mimosaPtmpChPwrChWidthCur OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the current channel width for access point operation: 20 MHz, + 40 MHz or 80 MHz" + ::= { mimosaPtmpChannelPowerEntry 9 } + +mimosaPtmpChPwrTxPowerCur OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the current transmit power level. The allowed options + are determined by a combination of country and chosen frequency. + Measured in dBm" + ::= { mimosaPtmpChannelPowerEntry 10 } + +mimosaPtmpChPwrAgcMode OBJECT-TYPE + SYNTAX INTEGER { + off (0), + manual (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the setting for Automatic Gain Control (AGC) feature, + which is used to set the signal level below which the radio + ignores incoming RF interference. The choices are Off or Manual" + ::= { mimosaPtmpChannelPowerEntry 11 } + +mimosaPtmpChPwrMinRxPower OBJECT-TYPE + SYNTAX Integer32 (-90..-10) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Rx power level (in manual AGC Mode) below your + expected signal, but above other interference, measured in dBm" + ::= { mimosaPtmpChannelPowerEntry 12 } + +mimosaPtmpChannelExclusionTable OBJECT-TYPE + SYNTAX SEQUENCE OF MimosaPtmpChannelExclusionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Exclusions and Restrictions" + ::= { mimosaPtmpChannelPower 4 } + +mimosaPtmpChannelExclusionEntry OBJECT-TYPE + SYNTAX MimosaPtmpChannelExclusionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry that describes each SSID and all its related configuration" + INDEX { mimosaPtmpChannelExclusionIndex } + ::= { mimosaPtmpChannelExclusionTable 1 } + +MimosaPtmpChannelExclusionEntry ::= + SEQUENCE { + mimosaPtmpChannelExclusionIndex Integer32, + mimosaPtmpChannelExclusionStart Integer32, + mimosaPtmpChannelExclusionEnd Integer32 + } + +mimosaPtmpChannelExclusionIndex OBJECT-TYPE + SYNTAX Integer32 (1..16) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Describes the index used to access a particular entry in the + Exclusion list table." + ::= { mimosaPtmpChannelExclusionEntry 1 } + +mimosaPtmpChannelExclusionStart OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the lower limit for the exclusion range, not including + this frequency" + ::= { mimosaPtmpChannelExclusionEntry 2 } + +mimosaPtmpChannelExclusionEnd OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the upper limit for the exclusion range, not including + this frequency." + ::= { mimosaPtmpChannelExclusionEntry 3 } + + +-- ************************************************************************* +-- *** Mimosa Access Point Statistics *** +-- ************************************************************************* +mimosaPtmpApStatsRxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the number of bytes received by the AP in single-User mode" + ::= { mimosaPtmpApStats 1 } + +mimosaPtmpApStatsTxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the number of bytes transmitted by the AP in single-user + mode" + ::= { mimosaPtmpApStats 2 } + +mimosaPtmpApStatsRxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the number of packets received by the AP in single-user mode" + ::= { mimosaPtmpApStats 3 } + +mimosaPtmpApStatsTxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the number of packets transmitted by the AP in + single-user mode" + ::= { mimosaPtmpApStats 4 } + +mimosaPtmpApStatsTxPer OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the packet error rate on the transmit path of the + AP, in single-user mode" + ::= { mimosaPtmpApStats 5 } + +mimosaPtmpApStatsLastUpdated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the last updated time for these statistics" + ::= { mimosaPtmpApStats 6 } + + +-- ************************************************************************* +-- *** Mimosa Access Point Client Information *** +-- ************************************************************************* + +mimosaPtmpClientInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF MimosaPtmpClientInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of all the associated clients and related information of + each of them." + ::= { mimosaPtmpClientInfo 1 } + +mimosaPtmpClientInfoEntry OBJECT-TYPE + SYNTAX MimosaPtmpClientInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry that describes each client and related configuration and + statistics." + INDEX { mimosaPtmpClientInfoIndex } + ::= { mimosaPtmpClientInfoTable 1 } + +MimosaPtmpClientInfoEntry ::= + SEQUENCE { mimosaPtmpClientInfoIndex Unsigned32, + mimosaPtmpClientInfoMacAddress MacAddress, + mimosaPtmpClientName DisplayString, + mimosaPtmpClientFWVersion DisplayString, + mimosaPtmpClientIPAddress IpAddress, + mimosaPtmpClientAssociatedTime TimeStamp, + mimosaPtmpClientPlanName DisplayString, + mimosaPtmpClientUlCommitted Unsigned32, + mimosaPtmpClientUlPeak Unsigned32, + mimosaPtmpClientDlCommitted Unsigned32, + mimosaPtmpClientDlPeak Unsigned32, + mimosaPtmpClientInfoLastUpdated TimeStamp } + +mimosaPtmpClientInfoIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Describes the index used to access a particular entry in the + Client Traffic Shaping Information table." + ::= { mimosaPtmpClientInfoEntry 1 } + +mimosaPtmpClientInfoMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the MAC address of the client associated to this access- + point." + ::= { mimosaPtmpClientInfoEntry 2 } + +mimosaPtmpClientName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the name associated with this client." + ::= { mimosaPtmpClientInfoEntry 3 } + +mimosaPtmpClientFWVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the firmware version of this client. + + This is supported only if the client is a Mimosa device." + ::= { mimosaPtmpClientInfoEntry 4 } + +mimosaPtmpClientIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the IP Address associated with this client." + ::= { mimosaPtmpClientInfoEntry 5 } + +mimosaPtmpClientAssociatedTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes how long the client is associated with this access-point." + ::= { mimosaPtmpClientInfoEntry 6 } + +mimosaPtmpClientPlanName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Traffic Shaping plan associated with this client." + ::= { mimosaPtmpClientInfoEntry 7 } + +mimosaPtmpClientUlCommitted OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Uplink Committed Rate configured for the client." + ::= { mimosaPtmpClientInfoEntry 8 } + +mimosaPtmpClientUlPeak OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Uplink Peak Rate configured for the client." + ::= { mimosaPtmpClientInfoEntry 9 } + +mimosaPtmpClientDlCommitted OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Downlink Committed Rate configured for the client." + ::= { mimosaPtmpClientInfoEntry 10 } + +mimosaPtmpClientDlPeak OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Downlink Peak Rate configured for the client." + ::= { mimosaPtmpClientInfoEntry 11 } + +mimosaPtmpClientInfoLastUpdated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the last updated time of this information for the Client." + ::= { mimosaPtmpClientInfoEntry 12 } + + +-- ************************************************************************* +-- *** Mimosa Access Point Client Statistics *** +-- ************************************************************************* + +mimosaPtmpClientStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF MimosaPtmpClientStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of all the associated clients and related information of each + of them." + + ::= { mimosaPtmpClientStats 1 } + +mimosaPtmpClientStatsEntry OBJECT-TYPE + SYNTAX MimosaPtmpClientStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry that describes each client all its related configuration and + statistics." + INDEX { mimosaPtmpClientStatsIndex } + ::= { mimosaPtmpClientStatsTable 1 } + +MimosaPtmpClientStatsEntry ::= + SEQUENCE { mimosaPtmpClientStatsIndex Unsigned32, + mimosaPtmpClientStatsMacAddress MacAddress, + mimosaPtmpClientAssocBW Unsigned32, + mimosaPtmpClientRxBytes Counter64, + mimosaPtmpClientTxBytes Counter64, + mimosaPtmpClientRxPkts Counter64, + mimosaPtmpClientTxPkts Counter64, + mimosaPtmpClientRxPhyRate Unsigned32, + mimosaPtmpClientTxPhyRate Unsigned32, + mimosaPtmpClientTxAvgPer DecimalTwo, + mimosaPtmpClientRssiAvg DecimalOne, + mimosaPtmpClientStatsLastUpdated TimeStamp + } + +mimosaPtmpClientStatsIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Describes the index used to access a particular entry in the + Client Information table." + ::= { mimosaPtmpClientStatsEntry 1 } + +mimosaPtmpClientStatsMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the MAC address of the client associated to this access- + point." + ::= { mimosaPtmpClientStatsEntry 2 } + +mimosaPtmpClientAssocBW OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the associated bandwidth of the client." + ::= { mimosaPtmpClientStatsEntry 3 } + +mimosaPtmpClientRxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the number of bytes received from this client." + ::= { mimosaPtmpClientStatsEntry 4 } + +mimosaPtmpClientTxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the number of bytes transmitted to this client." + ::= { mimosaPtmpClientStatsEntry 5 } + +mimosaPtmpClientRxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the number of packets received from this client." + ::= { mimosaPtmpClientStatsEntry 6 } + +mimosaPtmpClientTxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the number of packets transmitted to this client." + ::= { mimosaPtmpClientStatsEntry 7 } + +mimosaPtmpClientRxPhyRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the receive rate of this client." + ::= { mimosaPtmpClientStatsEntry 8 } + +mimosaPtmpClientTxPhyRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the transmit rate of this client." + ::= { mimosaPtmpClientStatsEntry 9 } + +mimosaPtmpClientTxAvgPer OBJECT-TYPE + SYNTAX DecimalTwo + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the average packet error rate on the transmit side for + this client." + ::= { mimosaPtmpClientStatsEntry 10 } + +mimosaPtmpClientRssiAvg OBJECT-TYPE + SYNTAX DecimalOne + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the average RSSI for this Client." + ::= { mimosaPtmpClientStatsEntry 11 } + +mimosaPtmpClientStatsLastUpdated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the last updated time of this information for the Client." + ::= { mimosaPtmpClientStatsEntry 12 } + + +-- ************************************************************************* +-- *** Mimosa PTMP Management Information variables are specified below. *** +-- ************************************************************************* + +mimosaPtmpMgmtIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the IP Address configured on the Mimosa Device" + ::= { mimosaPtmpMgmtInfo 1 } + +mimosaPtmpMgmtIpNetmask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the IP netmask configured on the Mimosa Device" + ::= { mimosaPtmpMgmtInfo 2 } + +mimosaPtmpMgmtIpGateway OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the IP Address of the Gateway configured on the Mimosa + Device" + ::= { mimosaPtmpMgmtInfo 3 } + +mimosaPtmpMgmtIpMode OBJECT-TYPE + SYNTAX DisplayString (SIZE (4..6)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the IP Address assignment mode configured on the Mimosa + Device" + ::= { mimosaPtmpMgmtInfo 4 } + +mimosaPtmpMgmtPrimaryDNS OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the IP Address of the Primary DNS server configured on the + Mimosa Device" + ::= { mimosaPtmpMgmtInfo 5 } + +mimosaPtmpMgmtSecondaryDNS OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the IP Address of the Secondary DNS server configured on the + Mimosa Device" + ::= { mimosaPtmpMgmtInfo 6 } + +mimosaPtmpMgmtVlanStatus OBJECT-TYPE + SYNTAX INTEGER { + disable (0), + enable (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the status of management vlan configured on the Mimosa Device" + ::= { mimosaPtmpMgmtInfo 7 } + +mimosaPtmpMgmtVlanId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the management vlan-id configured on the Mimosa Device" + ::= { mimosaPtmpMgmtInfo 8 } + +mimosaPtmpMgmtVlanPassthrough OBJECT-TYPE + SYNTAX INTEGER { + disable (0), + enable (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the status of the vlan passthrough configured on the Mimosa Device" + ::= { mimosaPtmpMgmtInfo 9 } + +mimosaPtmpMgmtEthernetMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Ethernet MAC address configured on the Mimosa Device" + ::= { mimosaPtmpMgmtInfo 10 } + +--- +--- Conformance/Compliance Statements +--- +mimosaPtmpConformance OBJECT IDENTIFIER ::= { mimosaConformanceGroup 2 } + +mimosaPtmpCompliances OBJECT IDENTIFIER ::= { mimosaPtmpConformance 1 } +mimosaPtmpGroups OBJECT IDENTIFIER ::= { mimosaPtmpConformance 2 } + + +mimosaPtmpCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for PTMP supported Access Points that + implement this MIB." + MODULE + GROUP mimosaPtmpSsidGroup + DESCRIPTION + "The mimosaPtmpSsidGroup is mandatory only for access-point device + supporting PTMP." + + GROUP mimosaPtmpLinkInfoGroup + DESCRIPTION + "The mimosaPtmpLinkInfoGroup is mandatory only for access-point + device supporting PTMP." + + GROUP mimosaPtmpChannelPowerGroup + DESCRIPTION + "The mimosaPtmpChannelPowerGroup is mandatory only for access-point + device supporting PTMP." + + GROUP mimosaPtmpApStatsGroup + DESCRIPTION + "The mimosaPtmpApStatsGroup is mandatory only for access-point + device supporting PTMP." + + GROUP mimosaPtmpClientStatsGroup + DESCRIPTION + "The mimosaPtmpClientStatsGroup is mandatory only for access-point + device supporting PTMP." + + GROUP mimosaPtmpClientInfoGroup + DESCRIPTION + "The mimosaPtmpClientInfoGroup is mandatory only for access-point + device supporting PTMP." + + GROUP mimosaPtmpMgmtInfoGroup + DESCRIPTION + "The mimosaPtmpMgmtInfoGroup is mandatory only for access-point + device supporting PTMP." + ::= { mimosaPtmpCompliances 1 } + + +mimosaPtmpSsidGroup OBJECT-GROUP + OBJECTS { + mimosaPtmpSsidName, + mimosaPtmpSsidType, + mimosaPtmpSsidEnabled, + mimosaPtmpSsidBroadcastEnabled, + mimosaPtmpSsidIsolationEnabled + } + STATUS current + DESCRIPTION + "A collection of objects for the SSID Table." + ::= { mimosaPtmpGroups 1 } + +mimosaPtmpLinkInfoGroup OBJECT-GROUP + OBJECTS { + mimosaPtmpWirelessMode, + mimosaPtmpWirelessGender, + mimosaPtmpWirelessTrafficSplit, + mimosaPtmpWirelessWindowLength + } + STATUS current + DESCRIPTION + "A collection of objects for the wireless link objects." + ::= { mimosaPtmpGroups 2 } + +mimosaPtmpChannelPowerGroup OBJECT-GROUP + OBJECTS { + mimosaPtmpAutoChannelEnabled, + mimosaPtmpAntennaGain, + mimosaPtmpChPwrRadioName, + mimosaPtmpChPwrCntrFreqCfg, + mimosaPtmpChPwrPrimChannelCfg, + mimosaPtmpChPwrChWidthCfg, + mimosaPtmpChPwrTxPowerCfg, + mimosaPtmpChPwrCntrFreqCur, + mimosaPtmpChPwrPrimChannelCur, + mimosaPtmpChPwrChWidthCur, + mimosaPtmpChPwrTxPowerCur, + mimosaPtmpChPwrAgcMode, + mimosaPtmpChPwrMinRxPower, + mimosaPtmpChannelExclusionStart, + mimosaPtmpChannelExclusionEnd + } + STATUS current + DESCRIPTION + "A collection of objects for the wireless channel and power settings." + ::= { mimosaPtmpGroups 3 } + +mimosaPtmpApStatsGroup OBJECT-GROUP + OBJECTS { + mimosaPtmpApStatsRxBytes, + mimosaPtmpApStatsTxBytes, + mimosaPtmpApStatsRxPkts, + mimosaPtmpApStatsTxPkts, + mimosaPtmpApStatsTxPer, + mimosaPtmpApStatsLastUpdated + } + STATUS current + DESCRIPTION + "A collection of objects describing the AP related statistics." + ::= { mimosaPtmpGroups 4 } + +mimosaPtmpClientInfoGroup OBJECT-GROUP + OBJECTS { + mimosaPtmpClientName, + mimosaPtmpClientFWVersion, + mimosaPtmpClientIPAddress, + mimosaPtmpClientAssociatedTime, + mimosaPtmpClientPlanName, + mimosaPtmpClientUlCommitted, + mimosaPtmpClientUlPeak, + mimosaPtmpClientDlCommitted, + mimosaPtmpClientDlPeak, + mimosaPtmpClientInfoLastUpdated + } + STATUS current + DESCRIPTION + "A collection of objects describing the client details." + ::= { mimosaPtmpGroups 5 } + +mimosaPtmpClientStatsGroup OBJECT-GROUP + OBJECTS { + mimosaPtmpClientStatsMacAddress, + mimosaPtmpClientAssocBW, + mimosaPtmpClientRxBytes, + mimosaPtmpClientRxPkts, + mimosaPtmpClientTxPkts, + mimosaPtmpClientRssiAvg, + mimosaPtmpClientRxPhyRate, + mimosaPtmpClientTxAvgPer, + mimosaPtmpClientTxPhyRate, + mimosaPtmpClientTxBytes, + mimosaPtmpClientStatsLastUpdated + } + STATUS current + DESCRIPTION + "A collection of objects describing the client statistics." + ::= { mimosaPtmpGroups 6 } + +mimosaPtmpMgmtInfoGroup OBJECT-GROUP + OBJECTS { + mimosaPtmpMgmtIpAddress, + mimosaPtmpMgmtIpNetmask, + mimosaPtmpMgmtIpGateway, + mimosaPtmpMgmtIpMode, + mimosaPtmpMgmtPrimaryDNS, + mimosaPtmpMgmtSecondaryDNS, + mimosaPtmpMgmtVlanStatus, + mimosaPtmpMgmtVlanId, + mimosaPtmpMgmtVlanPassthrough, + mimosaPtmpMgmtEthernetMac + } + STATUS current + DESCRIPTION + "A collection of objects describing the client details." + ::= { mimosaPtmpGroups 7 } + +END + |