diff options
Diffstat (limited to 'MIBS/mrv/NBS-SIGLANE-MIB')
| -rw-r--r-- | MIBS/mrv/NBS-SIGLANE-MIB | 533 |
1 files changed, 533 insertions, 0 deletions
diff --git a/MIBS/mrv/NBS-SIGLANE-MIB b/MIBS/mrv/NBS-SIGLANE-MIB new file mode 100644 index 0000000..9f09854 --- /dev/null +++ b/MIBS/mrv/NBS-SIGLANE-MIB @@ -0,0 +1,533 @@ +NBS-SIGLANE-MIB DEFINITIONS ::= BEGIN + +IMPORTS + OBJECT-TYPE, + MODULE-IDENTITY, OBJECT-IDENTITY, Counter64 + FROM SNMPv2-SMI + + InterfaceIndex + FROM IF-MIB + + DisplayString + FROM SNMPv2-TC + + NbsCmmcChannelBand + FROM NBS-CMMCENUM-MIB + + nbs, NbsTcMHz, NbsTcMilliDb, NbsTcMicroAmp, NbsTcTemperature + FROM NBS-MIB; + +nbsSigLaneMib MODULE-IDENTITY + LAST-UPDATED "201710180000Z" -- Oct 18, 2017 + ORGANIZATION "NBS" + CONTACT-INFO + "For technical support, please contact your service channel" + + DESCRIPTION + "Signaling Lane mib - objects for the management of multi-lane + ports such as QSFP, CXP, and CFP." + ::= { nbs 236 } + +-- ******************************************************************* +-- NBS-SIGLANE-MIB local defines +-- ******************************************************************* + + +nbsSigLanePortGrp OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Ports which aggregate multiple signaling lanes" + ::= { nbsSigLaneMib 10 } + +nbsSigLaneLaneGrp OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Individual signaling lanes within a port" + ::= { nbsSigLaneMib 20 } + + +nbsSigLaneTraps OBJECT-IDENTITY + STATUS current + DESCRIPTION "OBJECT-TYPE macros to be used in SNMP NOTIFICATION macros" + ::= { nbsSigLaneMib 100 } + +nbsSigLaneTraps0 OBJECT-IDENTITY + STATUS current + DESCRIPTION "NOTIFICATION-TYPE macros" + ::= { nbsSigLaneTraps 0 } + + +-- ******************************************************************* +-- +-- the nbsSigLanePortGrp +-- +-- ******************************************************************* + + +-- ****************************************************************** +-- +-- Objects for the Port Signaling Lane group +-- +-- ******************************************************************** + +nbsSigLanePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF NbsSigLanePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that describes signaling lanes for a QSFP[+] or CFP port." + ::= { nbsSigLanePortGrp 1 } + +nbsSigLanePortEntry OBJECT-TYPE + SYNTAX NbsSigLanePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains a description of a particular port signaling lane." + INDEX { nbsSigLanePortIfIndex } + ::= { nbsSigLanePortTable 1 } + +NbsSigLanePortEntry::= SEQUENCE { + nbsSigLanePortIfIndex InterfaceIndex, + nbsSigLanePortFacility INTEGER, + nbsSigLanePortLanes INTEGER +-- nbsSigLanePortTherm NbsTcTemperature use nbsCmmcPortTemperature +} + +nbsSigLanePortIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index to the MIB-II Interface table entry which represents this + port. This value should be 0 if there is no corresponding MIB-II + interface entry." + ::= { nbsSigLanePortEntry 1 } + +nbsSigLanePortFacility OBJECT-TYPE + SYNTAX INTEGER { + other (1), + fiber (2), + lambda (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "fiber(2) indicates that lane signaling is conducted on separate + fibers. + + lambda(3) indicates that lane signaling is conducted on different + wavelengths on a single SMF fiber." + ::= { nbsSigLanePortEntry 10 } + +nbsSigLanePortLanes OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of signaling lanes in this port" + ::= { nbsSigLanePortEntry 20 } + + + + +-- ******************************************************************* +-- +-- the nbsSigLaneLaneGrp +-- +-- ******************************************************************* + +nbsSigLaneLaneTable OBJECT-TYPE + SYNTAX SEQUENCE OF NbsSigLaneLaneEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that describes (fiber/lambda) network signaling lanes for a + multi-lane port." + ::= { nbsSigLaneLaneGrp 1 } + +nbsSigLaneLaneEntry OBJECT-TYPE + SYNTAX NbsSigLaneLaneEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains a description of a particular (fiber/lambda) signaling lane." + INDEX { nbsSigLaneLaneIfIndex, nbsSigLaneLaneIndex } + ::= { nbsSigLaneLaneTable 1 } + + +NbsSigLaneLaneEntry ::= SEQUENCE { + nbsSigLaneLaneIfIndex InterfaceIndex, + nbsSigLaneLaneIndex INTEGER, + nbsSigLaneLaneFrequency NbsTcMHz, + nbsSigLaneLaneWavelengthX DisplayString, + nbsSigLaneLaneChannelBand NbsCmmcChannelBand, + nbsSigLaneLaneChannelNumber INTEGER, + nbsSigLaneLaneTxDisable INTEGER, + nbsSigLaneLaneFaultsCaps OCTET STRING, + nbsSigLaneLaneFaultsOper OCTET STRING, + + nbsSigLaneLaneTxPowerLevel INTEGER, + nbsSigLaneLaneTxPower NbsTcMilliDb, + nbsSigLaneLaneTxPowerAdmin NbsTcMilliDb, + nbsSigLaneLaneRxPowerLevel INTEGER, + nbsSigLaneLaneRxPower NbsTcMilliDb, + nbsSigLaneLaneBiasAmpsLevel INTEGER, + nbsSigLaneLaneBiasAmps NbsTcMicroAmp, + nbsSigLaneLaneLaserTempLevel INTEGER, + nbsSigLaneLaneLaserTemp NbsTcTemperature, + + nbsSigLaneLaneEthTxAllOctets Counter64, + nbsSigLaneLaneEthTxAllFrames Counter64, + + nbsSigLaneLaneEthRxAllOctets Counter64, + nbsSigLaneLaneEthRxAllFrames Counter64 +} + +nbsSigLaneLaneIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index to the MIB-II Interface table entry which contains this + (fiber/lambda) lane." + ::= { nbsSigLaneLaneEntry 1 } + +nbsSigLaneLaneIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ordinal index for the signaling lane in a port: + 1..4 for QSFP[+] 4 x 10G + 1..4 for CFP 4 x 25G + 1..4 for CFP 4 x 28G + 1..10 for CFP 10 x 10G" + ::= { nbsSigLaneLaneEntry 2 } + +nbsSigLaneLaneFrequency OBJECT-TYPE + SYNTAX NbsTcMHz + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The nominal frequency, in MHz." + ::= { nbsSigLaneLaneEntry 10 } + +nbsSigLaneLaneWavelengthX OBJECT-TYPE + SYNTAX DisplayString(SIZE(4..8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The nominal wavelength (nanometers) is an ASCII string + to be human-readable. CWDM wavelengths use 4 digits. + DWDM wavelengths use seven digits and a decimal point. + + Not supported value: 'N/A'" + ::= { nbsSigLaneLaneEntry 11 } + +nbsSigLaneLaneChannelBand OBJECT-TYPE + SYNTAX NbsCmmcChannelBand + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ITU grid labels DWDM channels with a letter 'band' and a + numeric channel. Within this mib, the band is indicated by + this object, and the channel number is shown in the object + nbsOsaChannelNumber. + + Frequencies of at least 180100 GHz but less than 190100 GHz + are considered the L spectrum, and frequencies of at least + 190100 but less than 200100 GHz are considered the C spectrum. + + Frequencies evenly divisible by 100 GHz are designated with + a 'C' or 'L' prepended to the channel number. Frequencies + that are offset by 50 GHz are designated 'H' within the C + spectrum, and 'Q' within the L spectrum." + ::= { nbsSigLaneLaneEntry 12 } + +nbsSigLaneLaneChannelNumber OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The channel number can be derived by extracting the two middle + digits from the six digit frequency in GHz." + ::= { nbsSigLaneLaneEntry 13 } + +nbsSigLaneLaneTxDisable OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + no (2), + yes (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object controls the lane's transmitter: + + notSupported(1), returned if transmitter not configurable, i.e. always + enabled; + + no(2), to enable the transmitter; + + yes(3), to disable the transmitter" + ::= { nbsSigLaneLaneEntry 14 } + +nbsSigLaneLaneFaultsCaps OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..2)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the supported nbsSigLaneLaneFaultsOper bit(s). + + A zero length OCTET STRING indicates this information is not provided." + ::= { nbsSigLaneLaneEntry 15 } + +nbsSigLaneLaneFaultsOper OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..2)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides operational lane fault conditions: + + The first octet provides Tx information: + + Bit 0: Tx LOS if set + + Bit 1: Tx Fault if set + + Bit 2: Tx LOL if set + + Bit 3: Tx Adaptive EQ Fault if set + + The second octet provides Rx information: + + Bit 0: Rx LOS if set + + Bit 2: Rx LOL if set + + OCTET STRING bitmasks count the leftmost bit (MSB) as 0. + + A zero length OCTET STRING indicates this information is not provided." + ::= { nbsSigLaneLaneEntry 16 } + +nbsSigLaneLaneTxPowerLevel OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + lowAlarm (2), + lowWarning (3), + ok (4), + highWarning (5), + highAlarm (6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the status of this lane's + measured received power, reported in nbsSigLaneLaneTxPower: + + notSupported(1), if (nbsSigLaneLaneTxPower = 0x80000000); + + lowAlarm(2), + if nbsSigLaneLaneTxPower < nbsSigLanePortTxPowerVendorMin; + + lowWarning(3), + if nbsSigLaneLaneTxPower > nbsSigLanePortTxPowerVendorMin + and nbsSigLaneLaneTxPower < nbsSigLanePortTxPowerUserMin; + + ok(4), if nbsSigLaneLaneTxPower is within thresholds; + + highWarning(5), + if nbsSigLaneLaneTxPower < nbsSigLanePortTxPowerVendorMax + and nbsSigLaneLaneTxPower > nbsSigLanePortTxPowerUserMax; + + highAlarm(6), + if nbsSigLaneLaneTxPower > nbsSigLanePortTxPowerVendorMax" + DEFVAL { ok } + ::= { nbsSigLaneLaneEntry 20 } + +nbsSigLaneLaneTxPower OBJECT-TYPE + SYNTAX NbsTcMilliDb + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The output power (in milli dBm) of this lane. + + Not supported value: 0x80000000" + DEFVAL { -2147483648 } + ::= { nbsSigLaneLaneEntry 21 } + +nbsSigLaneLaneTxPowerAdmin OBJECT-TYPE + SYNTAX NbsTcMilliDb + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The desired output power (in milli dBm) for this lane; the value + should be within the supported bounds of the given pluggable. + For a CFP/CFP2 supporting configurable Tx power, this is applied + in the corresponding MSA B41x register. + + Not supported value: 0x80000000" + DEFVAL { -2147483648 } + ::= { nbsSigLaneLaneEntry 22 } + +nbsSigLaneLaneRxPowerLevel OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + lowAlarm (2), + lowWarning (3), + ok (4), + highWarning (5), + highAlarm (6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the status of this lane's + measured received power, reported in nbsSigLaneLaneRxPower: + + notSupported(1), if (nbsSigLaneLaneRxPower = 0x80000000); + + lowAlarm(2), + if nbsSigLaneLaneRxPower < nbsSigLanePortRxPowerVendorMin; + + lowWarning(3), + if nbsSigLaneLaneRxPower > nbsSigLanePortRxPowerVendorMin + and nbsSigLaneLaneRxPower < nbsSigLanePortRxPowerUserMin; + + ok(4), if nbsSigLaneLaneRxPower is within thresholds; + + highWarning(5), + if nbsSigLaneLaneRxPower < nbsSigLanePortRxPowerVendorMax + and nbsSigLaneLaneRxPower > nbsSigLanePortRxPowerUserMax; + + highAlarm(6), + if nbsSigLaneLaneRxPower > nbsSigLanePortRxPowerVendorMax" + DEFVAL { ok } + ::= { nbsSigLaneLaneEntry 30 } + +nbsSigLaneLaneRxPower OBJECT-TYPE + SYNTAX NbsTcMilliDb + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The received optical power (in milli dBm) of this lane. + + Not supported value: 0x80000000" + DEFVAL { -2147483648 } + ::= { nbsSigLaneLaneEntry 31 } + +nbsSigLaneLaneBiasAmpsLevel OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + lowAlarm (2), + lowWarning (3), + ok (4), + highWarning (5), + highAlarm (6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the status of laser bias current, + as reported in nbsSigLaneLaneBiasAmps: + + notSupported(1), if (nbsSigLaneLaneBiasAmps = -1); + + lowAlarm(2), if below nbsSigLanePortBiasAmpsVendorMin; + + ok(4), if within the recommended operating range; + + highAlarm(6), if above nbsSigLanePortBiasAmpsVendorMax." + DEFVAL { ok } + ::= { nbsSigLaneLaneEntry 40 } + +nbsSigLaneLaneBiasAmps OBJECT-TYPE + SYNTAX NbsTcMicroAmp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The bias current (in microAmps) of this lane. + + Not supported value: -1" + DEFVAL { -1 } + ::= { nbsSigLaneLaneEntry 41 } + +nbsSigLaneLaneLaserTempLevel OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + lowAlarm (2), + lowWarning (3), + ok (4), + highWarning (5), + highAlarm (6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the status of laser temperature, + as reported in nbsSigLaneLaneLaserTemp: + + notSupported(1), if (nbsSigLaneLaneLaserTemp = 0x80000000); + + lowAlarm(2), if below nbsSigLanePortLaserTempVendorMin; + + ok(4), if within the recommended operating range; + + highAlarm(6), if above nbsSigLanePortLaserTempVendorMax." + DEFVAL { ok } + ::= { nbsSigLaneLaneEntry 50 } + +nbsSigLaneLaneLaserTemp OBJECT-TYPE + SYNTAX NbsTcTemperature + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The temperature (in degrees Celsius) of this lane. + + Not supported value: 0x80000000" + DEFVAL { -2147483648 } + ::= { nbsSigLaneLaneEntry 51 } + +nbsSigLaneLaneEthTxAllOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The count of bytes in all Ethernet frames transmitted. + + Not supported value: 0xFFFFFFFFFFFFFFFF" + ::= { nbsSigLaneLaneEntry 60 } + +nbsSigLaneLaneEthTxAllFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The count of all Ethernet frames transmitted. + + Not supported value: 0xFFFFFFFFFFFFFFFF" + ::= { nbsSigLaneLaneEntry 61 } + +nbsSigLaneLaneEthRxAllOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The count of bytes in all Ethernet frames received. + + Not supported value: 0xFFFFFFFFFFFFFFFF" + ::= { nbsSigLaneLaneEntry 70 } + +nbsSigLaneLaneEthRxAllFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The count of all Ethernet frames received. + + Not supported value: 0xFFFFFFFFFFFFFFFF" + ::= { nbsSigLaneLaneEntry 71 } + + +END |