diff options
Diffstat (limited to 'MIBS/nokia/ALCATEL-IND1-E-SERVICE-MIB')
| -rw-r--r-- | MIBS/nokia/ALCATEL-IND1-E-SERVICE-MIB | 1452 |
1 files changed, 1452 insertions, 0 deletions
diff --git a/MIBS/nokia/ALCATEL-IND1-E-SERVICE-MIB b/MIBS/nokia/ALCATEL-IND1-E-SERVICE-MIB new file mode 100644 index 0000000..4785f7c --- /dev/null +++ b/MIBS/nokia/ALCATEL-IND1-E-SERVICE-MIB @@ -0,0 +1,1452 @@ + +ALCATEL-IND1-E-SERVICE-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, + OBJECT-IDENTITY, + OBJECT-TYPE, + Integer32, Counter64 FROM SNMPv2-SMI + OBJECT-GROUP, + MODULE-COMPLIANCE FROM SNMPv2-CONF + softentIND1eService FROM ALCATEL-IND1-BASE + RowStatus, + TEXTUAL-CONVENTION, + DisplayString, + MacAddress FROM SNMPv2-TC + InterfaceIndex FROM IF-MIB + ; + + alcatelIND1EServiceMIB MODULE-IDENTITY + LAST-UPDATED "201001200000Z" + ORGANIZATION "Alcatel-Lucent" + CONTACT-INFO + "Please consult with Customer Service to ensure the most appropriate + version of this document is used with the products in question: + + Alcatel-Lucent, Enterprise Solutions Division + (Formerly Alcatel Internetworking, Incorporated) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + DESCRIPTION + "The parameters for configuration of the E-Service feature. + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 1995-2006 Alcatel-Lucent + ALL RIGHTS RESERVED WORLDWIDE" + + REVISION "201001200000Z" + DESCRIPTION + "Added notAssigned value for objects alaEServiceSapProfilePriorityMapMode + and alaEServiceSapProfileBandwidthShare." + + REVISION "200912160000Z" + DESCRIPTION + "The below listed objects are made as read-create in 6.6.1.680.R01 + Post GA. + alaEServiceUNIProfile8021xTreatment, alaEServiceUNIProfile8021ABTreatment, + alaEServiceUNIProfile8023adTreatment & alaEServiceUNIProfileAmapTreatment." + + ::= { softentIND1eService 1} +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- Textual Conventions + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +AlaEServiceUNIProfileProtocolTreatment ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The behavior of the bridge in regards to the given protocols packets received on + the UNI. Tunnel (1) enables the packets to be tunneled across the provider + network. Discard (2) causes the packets to be discarded and not enter + the provider network. Peer (3) means that on this port the bridge is to + participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." + SYNTAX INTEGER + { + tunnel (1), + drop (2), + peer (3), + macTunnel (4) + } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +alcatelIND1eServiceMIBObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For E-Service Managed Objects." + ::= { alcatelIND1EServiceMIB 1 } + +alcatelIND1EServiceMIBConformance OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For E-Service Conformance Information." + ::= { alcatelIND1EServiceMIB 2 } + +alcatelIND1EServiceMIBGroups OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For E-Service Units Of Conformance." + ::= { alcatelIND1EServiceMIBConformance 1 } + +alcatelIND1EServiceMIBCompliances OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For E-Service Compliance Statements." + ::= { alcatelIND1EServiceMIBConformance 2 } + + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service Group + + alaEService OBJECT IDENTIFIER ::= { alcatelIND1eServiceMIBObjects 1 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +alaEServiceInfo OBJECT IDENTIFIER ::= { alaEService 1 } + + +alaEServiceMode OBJECT-TYPE + SYNTAX INTEGER + { + legacyMode (1), + eServiceMode (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current mode configured for Vlan Stacking and Layer 2 tunnel configuration. + legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are + to be used. eServiceMode (2) indicates the commands from this MIB are to be used." + DEFVAL { legacyMode } + ::= { alaEServiceInfo 1 } + +alaEServiceStatReset OBJECT-TYPE + SYNTAX INTEGER + { + default(0), + reset(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the global clear statistics control for ethernet-service + counters. + default(0) - default value for this object, + reset(1) - indicates that all ethernet-service counters should be + cleared." + DEFVAL { default } + ::= { alaEServiceInfo 2 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service SAP Profile Table + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +alaEServiceSapProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaEServiceSapProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains service profiles containing performance and control attributes. + An entry in this table is created when a new service profile is defined." + ::= { alaEService 2 } + +alaEServiceSapProfileEntry OBJECT-TYPE + SYNTAX AlaEServiceSapProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A E-Service Service Profile entry." + INDEX { IMPLIED alaEServiceSapProfileID } + ::= { alaEServiceSapProfileTable 1 } + +AlaEServiceSapProfileEntry ::= SEQUENCE + { + alaEServiceSapProfileID DisplayString, + alaEServiceSapProfileCVLANTreatment INTEGER, + alaEServiceSapProfileReplacementCVLAN INTEGER, + alaEServiceSapProfilePriorityMapMode INTEGER, + alaEServiceSapProfileFixedPriority INTEGER, + alaEServiceSapProfileIngressBW Integer32, + alaEServiceSapProfileBandwidthShare INTEGER, + alaEServiceSapProfileRowStatus RowStatus, + alaEServiceSapProfileEgressBW Integer32, + alaEServiceSapProfileCIR Integer32, + alaEServiceSapProfileCBS Integer32, + alaEServiceSapProfilePIR Integer32, + alaEServiceSapProfilePBS Integer32 + + } + +alaEServiceSapProfileID OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A label given to uniquely identify this profile. Must be at least one character long." + ::= { alaEServiceSapProfileEntry 1 } + +alaEServiceSapProfileCVLANTreatment OBJECT-TYPE + SYNTAX INTEGER + { + stackSVLAN (1), + translate (2), + changeCVLAN (3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of VLAN stacking operation to be performed on a customer frame entering + this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the + frame before any existing 802.1Q tag. Translate (2) means to replace the existing + 802.1Q tag with the SVLAN. Change CVLAN (3) indicates that the customer tag is to + remain on the frame but its value is to be changed to the supplied value." + DEFVAL { stackSVLAN } + ::= { alaEServiceSapProfileEntry 2 } + +alaEServiceSapProfileReplacementCVLAN OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The CVLAN ID to use when using the Change CVLAN treatment mode." + ::= { alaEServiceSapProfileEntry 3 } + +alaEServiceSapProfilePriorityMapMode OBJECT-TYPE + SYNTAX INTEGER + { + notAssigned(0), + mapInnerPtoOuterP (1), + mapInnerDscpToOuterP(2), + fixedP (3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the source of the value for the priority field of the SVLAN + 802.1Q tag when pre-pended to the customer data frame. If set to notAssigned(0), SAP + priority limit parameter will not be effective, QoS priority settings needs to be + configured. mapInnerPtoOuterP (1) uses the priority field of the incoming frame when + tagged to fill in the priority field of the SVLAN tag. mapInnerDscpToOuterP (2) uses + the frames priority bits in its IP DSCP field to fill in the priority field of the + SVLAN tag. FixedP (3) uses the supplied FixedPriorityValue to fill in the SVLAN tag + priority bits." + DEFVAL { fixedP } + ::= { alaEServiceSapProfileEntry 4 } + +alaEServiceSapProfileFixedPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the value of the priority field of the 802.1Q SVLAN tag + pre-pended to customer data frames when the fixed priority mapping mode is selected." + DEFVAL { 0 } + ::= { alaEServiceSapProfileEntry 5 } + +alaEServiceSapProfileIngressBW OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes this limit of ingress bandwidth for the traffic to which + this profile is applied. If 0, no bandwidth limit is applied. This number represents + traffic in units of 1,000,000 bits per second. Note that all CVLAN that belong to this + SAP will share this aggregated limit." + ::= { alaEServiceSapProfileEntry 6 } + +alaEServiceSapProfileBandwidthShare OBJECT-TYPE + SYNTAX INTEGER + { + notApplicable(0), + shared (1), + notShared(2), + notAssigned(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the use of the bandwidth limit in how it is applied across + multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set + to Shared (1), all the ports that are part of the SAP will use aggregated + bandwidth, sharing some part of the bandwidth limit. If set to notShared (2), + each port will use its own bandwidth meter for this SAP. This value is not used + if ingressBandwidth is 0. If set to notAssigned(3), SAP bandwidth limit parameter + will not be effective, QoS bandwith settings needs to be configured." + DEFVAL { shared } + ::= { alaEServiceSapProfileEntry 7 } + +alaEServiceSapProfileRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this table entry." + ::= { alaEServiceSapProfileEntry 8 } + +alaEServiceSapProfileEgressBW OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes this limit of egress bandwidth for each UNI + of the SAP to which this profile is applied. If 0, no bandwidth limit + is applied. This number represents traffic in units of Megabits per + second. Note that all CVLAN that belong to this SAP will share this + aggregated limit." + DEFVAL { 0 } + ::= { alaEServiceSapProfileEntry 9 } + +alaEServiceSapProfileCIR OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION "Committed Information Rate - bandwidth values in bits per second." + DEFVAL { 0 } + ::= { alaEServiceSapProfileEntry 10 } + +alaEServiceSapProfileCBS OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION "Committed Burst Size - bucket size in byte." + DEFVAL { 0 } + ::= { alaEServiceSapProfileEntry 11 } + +alaEServiceSapProfilePIR OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION "Peak Information Rate - bandwidth values in bits per second." + DEFVAL { 0 } + ::= { alaEServiceSapProfileEntry 12 } + +alaEServiceSapProfilePBS OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION "Peak Burst Size - bucket size in byte." + DEFVAL { 0 } + ::= { alaEServiceSapProfileEntry 13 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service UNI Profile Table + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +alaEServiceUNIProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaEServiceUNIProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains service profiles containing performance and control attributes. + An entry in this table is created when a new service profile is defined." + ::= { alaEService 3 } + +alaEServiceUNIProfileEntry OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A E-Service Service Profile entry." + INDEX { IMPLIED alaEServiceUNIProfileID } + ::= { alaEServiceUNIProfileTable 1 } + +AlaEServiceUNIProfileEntry ::= SEQUENCE + { + alaEServiceUNIProfileID DisplayString, + alaEServiceUNIProfileStpBpduTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfile8021xTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfile8021ABTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfile8023adTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileGvrpTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileAmapTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileRowStatus RowStatus, + alaEServiceUNIProfileMvrpTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileTunnelMac MacAddress, + alaEServiceUNIProfileLacpMarkerTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileOamTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileCiscoPagpTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileCiscoUdldTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileCiscoCdpTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileCiscoVtpTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileCiscoDtpTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileCiscoPvstTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileCiscoVlanTreatment AlaEServiceUNIProfileProtocolTreatment, + alaEServiceUNIProfileCiscoUplinkTreatment AlaEServiceUNIProfileProtocolTreatment + } + +alaEServiceUNIProfileID OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A label given to uniquely identify this profile. Must be at least one character long." + ::= { alaEServiceUNIProfileEntry 1 } + +alaEServiceUNIProfileStpBpduTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the spanning tree + protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across + the provider network. Discard (2) causes the PDU of the protocol to be discarded + and not enter the provider network. Peer (3) means that on this port the bridge + is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." + DEFVAL { tunnel } + ::= { alaEServiceUNIProfileEntry 2 } + +alaEServiceUNIProfile8021xTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU + frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across + the provider network. Discard (2) causes the PDU of the protocol to be discarded + and not enter the provider network. Peer (3) means that on this port the bridge + is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 3 } + +alaEServiceUNIProfile8021ABTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU + frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across + the provider network. Discard (2) causes the PDU of the protocol to be discarded + and not enter the provider network. Peer (3) means that on this port the bridge + is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 4 } + +alaEServiceUNIProfile8023adTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU + frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across + the provider network. Discard (2) causes the PDU of the protocol to be discarded + and not enter the provider network. Peer (3) means that on this port the bridge + is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." + DEFVAL { peer } + ::= { alaEServiceUNIProfileEntry 5 } + +alaEServiceUNIProfileGvrpTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the GVRP PDU + frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across + the provider network. Discard (2) causes the PDU of the protocol to be discarded + and not enter the provider network. Peer (3) means that on this port the bridge + is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." + DEFVAL { tunnel } + ::= { alaEServiceUNIProfileEntry 6 } + +alaEServiceUNIProfileAmapTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the Alcatel + propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. + Currenly mac-tunnel is not supported" + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 7 } + +alaEServiceUNIProfileRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this table entry." + ::= { alaEServiceUNIProfileEntry 8 } + +alaEServiceUNIProfileMvrpTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the MVRP PDU + frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across + the provider network. Discard (2) causes the PDU of the protocol to be discarded + and not enter the provider network. Peer (3) means that on this port the bridge + is to participate in the protocol. Currently peer is not supported for MVRP" + DEFVAL { tunnel } + ::= { alaEServiceUNIProfileEntry 9 } + +alaEServiceUNIProfileTunnelMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the tunnel mac used to tunnel L2 protocol to NNI ports" + ::= { alaEServiceUNIProfileEntry 10 } + + +alaEServiceUNIProfileLacpMarkerTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the LACP MARKER PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." + DEFVAL { peer } + ::= { alaEServiceUNIProfileEntry 11 } + +alaEServiceUNIProfileOamTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the OAM PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." + DEFVAL { peer } + ::= { alaEServiceUNIProfileEntry 12 } + +alaEServiceUNIProfileCiscoPagpTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the PAGP PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. + Currently peer is not supported" + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 13 } + +alaEServiceUNIProfileCiscoUdldTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the UDLD PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 14 } + +alaEServiceUNIProfileCiscoCdpTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the CDC PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. + Currently peer is not supported" + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 15 } + +alaEServiceUNIProfileCiscoVtpTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the VTP PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. + Currently peer is not supported" + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 16 } + +alaEServiceUNIProfileCiscoDtpTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the DTP PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. + Currently peer not supported" + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 17 } + + +alaEServiceUNIProfileCiscoPvstTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the PVST PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. + Currently peer not supported" + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 18 } + +alaEServiceUNIProfileCiscoVlanTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the VLAN PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. + Currently peer not supported" + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 19 } + +alaEServiceUNIProfileCiscoUplinkTreatment OBJECT-TYPE + SYNTAX AlaEServiceUNIProfileProtocolTreatment + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object describes the behavior of the bridge in regards to the UPLINK PDU + frames received on the UNI. Tunnel (1) enables the PDU to + be tunneled across the provider network. Discard (2) causes the PDU of the + protocol to be discarded and not enter the provider network. Peer (3) means + that on this port the bridge is to participate in the protocol. Mac-Tunnel(4) enables mac-tunnelling. + Currently peer not supported." + DEFVAL { drop } + ::= { alaEServiceUNIProfileEntry 20 } + + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service Service Table + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +alaEServiceTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaEServiceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains the services and their assigned SVLAN for the + E-Service feature." + ::= { alaEService 4 } + +alaEServiceEntry OBJECT-TYPE + SYNTAX AlaEServiceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The svlan/ipmvlan-port association." + INDEX { IMPLIED alaEServiceID } + ::= { alaEServiceTable 1 } + +AlaEServiceEntry ::= SEQUENCE + { + alaEServiceID DisplayString, + alaEServiceSVLAN INTEGER, + alaEServiceVlanType INTEGER, + alaEServiceRowStatus RowStatus, + alaEServiceStatGreenCount Counter64, + alaEServiceStatYellowCount Counter64, + alaEServiceStatRedCount Counter64 + } + +alaEServiceID OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A label given to uniquely identify this Service. Must be at least one character long." + ::= { alaEServiceEntry 1 } + +alaEServiceSVLAN OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SVLAN number of the SVLAN chosen to the be transport for this service." + ::= { alaEServiceEntry 2 } + +alaEServiceVlanType OBJECT-TYPE + SYNTAX INTEGER { + unknown(0), + svlan(1), + ipmvlan(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of the vlan this service is going to attach to. When creating the service, + the type should match the vlanId specified in the request." + ::= { alaEServiceEntry 3 } + +alaEServiceRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this table entry. The supported value for set are + createAndGo (4) and destroy(6), to add or remove a service. When + creating or deleting the service, the user needs to provide both + the svlan and the vlantype objects." + ::= { alaEServiceEntry 4 } + +alaEServiceStatGreenCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM + and trTCM, packet is CIR/CBS compliant)." + ::= { alaEServiceEntry 5 } + +alaEServiceStatYellowCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM + and trTCM, packet is PIR/PBS compliant)." + ::= { alaEServiceEntry 6 } + +alaEServiceStatRedCount OBJECT-TYPE +SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM + and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant)." + ::= { alaEServiceEntry 7 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service SAP Table + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +alaEServiceSapTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaEServiceSapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains the Service Access Points (Sap) listed by ID. + This table is used to create, delete, and modify the SAP's profile" + ::= { alaEService 5 } + +alaEServiceSapEntry OBJECT-TYPE + SYNTAX AlaEServiceSapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of SAP." + INDEX { alaEServiceSapID} + ::= { alaEServiceSapTable 1 } + +AlaEServiceSapEntry ::= SEQUENCE + { + alaEServiceSapID Integer32, + alaEServiceSapServiceID DisplayString, + alaEServiceSapProfile DisplayString, + alaEServiceSapRowStatus RowStatus + } + +alaEServiceSapID OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Number given to uniquely identify the SAP." + ::= { alaEServiceSapEntry 1 } + +alaEServiceSapServiceID OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A label given to uniquely identify the Service this SAP is for. Must + be at least one character long." + ::= { alaEServiceSapEntry 2 } + +alaEServiceSapProfile OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The string identifying the SAP Profile this sap is to use. If specified, must match an existing + SAP Profile." + ::= { alaEServiceSapEntry 3 } + +alaEServiceSapRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this table entry. The supported value for set are + createAndGo (4) and destroy(6), to add or remove a sap. When + creating the sap, the user needs to provide the service name in + the same set request." + ::= { alaEServiceSapEntry 4 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service SAP CVLAN Table + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +alaEServiceSapCvlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaEServiceSapCvlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains the Service Access Points (Sap) where the CVLANs are bound + to their service." + ::= { alaEService 6 } + +alaEServiceSapCvlanEntry OBJECT-TYPE + SYNTAX AlaEServiceSapCvlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The CVLAN to Sap binding." + INDEX { alaEServiceSapCvlanSapID, alaEServiceSapCvlanCvlan } + ::= { alaEServiceSapCvlanTable 1 } + +AlaEServiceSapCvlanEntry ::= SEQUENCE + { + alaEServiceSapCvlanSapID Integer32, + alaEServiceSapCvlanCvlan INTEGER, + alaEServiceSapCvlanMapType INTEGER, + alaEServiceSapCvlanRowStatus RowStatus + } + +alaEServiceSapCvlanSapID OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Number given to uniquely identify this SAP." + ::= { alaEServiceSapCvlanEntry 1 } + +alaEServiceSapCvlanCvlan OBJECT-TYPE + SYNTAX INTEGER (0..4094) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object is the CVLAN ID that this binding is targeted at. The CVLAN ID + may be 0, which indicates an all or untagged only mapping type." + ::= { alaEServiceSapCvlanEntry 2 } + +alaEServiceSapCvlanMapType OBJECT-TYPE + SYNTAX INTEGER + { + single (1), + all(2), + untaggedOnly (3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is the mapping type that defines what CVLANs are mapped into this service. + Multiple mappings can be defined for CVLAN to service, however only one all (2) or + untaggedOnly (3) mapping entry can be created per UNI. A mapping type of Single (1) + denotes a specific CVLAN value to bind to the service. A mapping type of All (2) + denotes that all customer frames that do not map to any other SAP, + will be mapped into this service. A mapping type of Untagged (3) denotes that only + the untagged frames will be mapped into this service." + DEFVAL { single } + ::= { alaEServiceSapCvlanEntry 3 } + +alaEServiceSapCvlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this table entry. The supported value for set are + createAndGo (4) and destroy(6), to add or remove a SAP." + ::= { alaEServiceSapCvlanEntry 4 } + + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service Port Table + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +alaEServicePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaEServicePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains the ports used by the EService feature. Both UNI and NNI + are listed here." + ::= { alaEService 7 } + +alaEServicePortEntry OBJECT-TYPE + SYNTAX AlaEServicePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of ports being used by EService." + INDEX { alaEServicePortID} + ::= { alaEServicePortTable 1 } + +AlaEServicePortEntry ::= SEQUENCE + { + alaEServicePortID InterfaceIndex, + alaEServicePortType INTEGER, + alaEServicePortVendorTpid Integer32, + alaEServicePortLegacyStpBpdu INTEGER, + alaEServicePortLegacyGvrpPdu INTEGER, + alaEServicePortUniProfile DisplayString, + alaEServicePortTransBridging INTEGER, + alaEServicePortLegacyMvrpPdu INTEGER + } + +alaEServicePortID OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IfIndex of this UNI or NNI Port." + ::= { alaEServicePortEntry 1 } + +alaEServicePortType OBJECT-TYPE + SYNTAX INTEGER + { + uni (1), + nni (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of port for Vlan Stacking operation. uni (1) represents a customer facing + port on which traffic may enter the E-Service. nni (2) respresents a provider network + port over which the E-Service may be connected." + DEFVAL { uni } + ::= { alaEServicePortEntry 2 } + +alaEServicePortVendorTpid OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "he TPID for this port if type is NNI. It is used for the incoming data + traffic parsing and it is substituted to the 802.1Q standard Tpid for + the outgoing data traffic. This is used for compatibility with other vendor + equipment. The default value is the standard value 0x8100." + DEFVAL { 33024 } + ::= { alaEServicePortEntry 3 } + +alaEServicePortLegacyStpBpdu OBJECT-TYPE + SYNTAX INTEGER + { + notApplicable (0), + enable (1), + disable (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The legacy STP BPDU treatment for this port if NNI. It defines the type of processing + applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer + BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be + enabled/disabled by this object.By default the value is disabled i.e + provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports." + DEFVAL { disable } + ::= { alaEServicePortEntry 4 } + +alaEServicePortLegacyGvrpPdu OBJECT-TYPE + SYNTAX INTEGER + { + notApplicable (0), + enable (1), + disable (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing + applied to GVRP PDUs on network ports. " + DEFVAL { disable } + ::= { alaEServicePortEntry 5 } + +alaEServicePortUniProfile OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The label of an existing UNI profile that which contains various properties to be + applied to this port if UNI." + ::= { alaEServicePortEntry 6 } + +alaEServicePortTransBridging OBJECT-TYPE + SYNTAX INTEGER + { + enable (1), + disable (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Transparent Bridging status for the nni Port." + DEFVAL { disable } + ::= { alaEServicePortEntry 7 } + +alaEServicePortLegacyMvrpPdu OBJECT-TYPE + SYNTAX INTEGER + { + notApplicable (0), + enable (1), + disable (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing + applied to MVRP PDUs on network ports. " + DEFVAL { disable } + ::= { alaEServicePortEntry 8 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service SAP-UNI Binding Table + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +alaEServiceSapUniTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaEServiceSapUniEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains the UNI that are bound to each SAP for classifying + traffic into each EService. Not that writing to this table may create + a new UNI." + ::= { alaEService 8 } + +alaEServiceSapUniEntry OBJECT-TYPE + SYNTAX AlaEServiceSapUniEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of SAP-UNI bindings being used by EService." + INDEX { alaEServiceSapUniSap, alaEServiceSapUniUni} + ::= { alaEServiceSapUniTable 1 } + +AlaEServiceSapUniEntry ::= SEQUENCE + { + alaEServiceSapUniSap Integer32, + alaEServiceSapUniUni InterfaceIndex, + alaEServiceSapUniRowStatus RowStatus + } + + +alaEServiceSapUniSap OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The SAP ID that is configured onto this port." + ::= { alaEServiceSapUniEntry 1 } + +alaEServiceSapUniUni OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IfIndex of this UNI Port." + ::= { alaEServiceSapUniEntry 2 } + +alaEServiceSapUniRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this table entry. The supported value for set are + createAndGo (4) and destroy(6), to add or remove a binding" + ::= { alaEServiceSapUniEntry 3 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service NNI-SVLAN Binding Table + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +alaEServiceNniSvlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaEServiceNniSvlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains the SVLANs bound to each NNI for use by the + EService feature." + ::= { alaEService 9 } + +alaEServiceNniSvlanEntry OBJECT-TYPE + SYNTAX AlaEServiceNniSvlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of NNI-SVLAN bindings being used by EService." + INDEX { alaEServiceNniSvlanNni, alaEServiceNniSvlanSvlan} + ::= { alaEServiceNniSvlanTable 1 } + +AlaEServiceNniSvlanEntry ::= SEQUENCE + { + alaEServiceNniSvlanNni InterfaceIndex, + alaEServiceNniSvlanSvlan INTEGER, + alaEServiceNniSvlanRowStatus RowStatus, + alaEServiceNniSvlanVpaType INTEGER + } + +alaEServiceNniSvlanNni OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IfIndex of this NNI Port." + ::= { alaEServiceNniSvlanEntry 1 } + +alaEServiceNniSvlanSvlan OBJECT-TYPE + SYNTAX INTEGER (2..4094) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The SVLAN bound to this port. SVLAN cannot be 1." + ::= { alaEServiceNniSvlanEntry 2 } + +alaEServiceNniSvlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this table entry. The supported value for set are + createAndGo (4) and destroy(6), to add or remove a binding" + ::= { alaEServiceNniSvlanEntry 3 } + +-- alaEServiceNniSvlanVpaType is added in 6.3.4.R01 + +alaEServiceNniSvlanVpaType OBJECT-TYPE + SYNTAX INTEGER { + stp (1), + erp (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The object is used to specify whether the VPA state is to + be controlled by an ERP or a STP. By default VPA state is + controlled by STP." + DEFVAL { stp } + ::= { alaEServiceNniSvlanEntry 4 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- The E-Service srTCM and trTCM Counter Statistics Table + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +alaEServiceSapCvlanPortStatTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaEServiceSapCvlanPortStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A statistics table that contains the counters per SAP." + ::= { alaEService 10 } + +alaEServiceSapCvlanPortStatEntry OBJECT-TYPE + SYNTAX AlaEServiceSapCvlanPortStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A E-Service Statistics Entry." + INDEX { alaEServiceSapCvlanPortStatSapID, + alaEServiceSapCvlanPortStatCvlanID, + alaEServiceSapCvlanPortStatPortID } + ::= { alaEServiceSapCvlanPortStatTable 1 } + +AlaEServiceSapCvlanPortStatEntry ::= SEQUENCE + { + alaEServiceSapCvlanPortStatSapID Integer32, + alaEServiceSapCvlanPortStatCvlanID INTEGER, + alaEServiceSapCvlanPortStatPortID InterfaceIndex, + alaEServiceSapCvlanPortStatGreenCount Counter64, + alaEServiceSapCvlanPortStatYellowCount Counter64, + alaEServiceSapCvlanPortStatRedCount Counter64 + } + +alaEServiceSapCvlanPortStatSapID OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Number given to uniquely identify the SAP." + ::= { alaEServiceSapCvlanPortStatEntry 1 } + +alaEServiceSapCvlanPortStatCvlanID OBJECT-TYPE + SYNTAX INTEGER (0..4094) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object is the CVLAN ID that this binding is targeted at. The CVLAN ID + may be 0, which indicates an all or untagged only mapping type." + ::= { alaEServiceSapCvlanPortStatEntry 2 } + +alaEServiceSapCvlanPortStatPortID OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IfIndex of this UNI Port." + ::= { alaEServiceSapCvlanPortStatEntry 3 } + +alaEServiceSapCvlanPortStatGreenCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM + and trTCM, packet is CIR/CBS compliant) per UNI port, per CVLAN. This object is applicable + only when ingress bandwidth is not shared across SAP ports and CVLANs." + ::= { alaEServiceSapCvlanPortStatEntry 4 } + +alaEServiceSapCvlanPortStatYellowCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM + and trTCM, packet is PIR/PBS compliant) per UNI port, per CVLAN. This object is applicable + only when ingress bandwidth is not shared across SAP ports and CVLANs." + ::= { alaEServiceSapCvlanPortStatEntry 5 } + +alaEServiceSapCvlanPortStatRedCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM + and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant) per UNI port, per CVLAN. + This object is applicable only when ingress bandwidth is not shared across SAP + ports and CVLANs." + ::= { alaEServiceSapCvlanPortStatEntry 6 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +-- COMPLIANCE +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +alcatelIND1EServiceMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for E-Service." + MODULE MANDATORY-GROUPS + { + alaEServiceSapProfileGroup, + alaEServiceUNIProfileGroup, + alaEServiceGroup, + alaEServiceSapGroup, + alaEServiceSapUniGroup, + alaEServiceSapCvlanGroup, + alaEServicePortGroup, + alaEServiceNniSvlanGroup, + alaEServiceSapCvlanPortStatGroup, + alaEServiceInfoGroup + } + ::= { alcatelIND1EServiceMIBCompliances 1 } + + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +-- UNITS OF CONFORMANCE +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +alaEServiceSapProfileGroup OBJECT-GROUP + OBJECTS + { + alaEServiceSapProfileCVLANTreatment, + alaEServiceSapProfileReplacementCVLAN, + alaEServiceSapProfilePriorityMapMode, + alaEServiceSapProfileFixedPriority, + alaEServiceSapProfileIngressBW, + alaEServiceSapProfileBandwidthShare, + alaEServiceSapProfileRowStatus, + alaEServiceSapProfileEgressBW, + alaEServiceSapProfileCIR, + alaEServiceSapProfileCBS, + alaEServiceSapProfilePIR, + alaEServiceSapProfilePBS + } + STATUS current + DESCRIPTION + "Collection of objects for management of E-Service Sap Profiles." + ::= { alcatelIND1EServiceMIBGroups 1 } + +alaEServiceUNIProfileGroup OBJECT-GROUP + OBJECTS + { + alaEServiceUNIProfileStpBpduTreatment, + alaEServiceUNIProfile8021xTreatment, + alaEServiceUNIProfile8021ABTreatment, + alaEServiceUNIProfile8023adTreatment, + alaEServiceUNIProfileGvrpTreatment, + alaEServiceUNIProfileAmapTreatment, + alaEServiceUNIProfileRowStatus, + alaEServiceUNIProfileMvrpTreatment, + alaEServiceUNIProfileTunnelMac, + alaEServiceUNIProfileLacpMarkerTreatment, + alaEServiceUNIProfileOamTreatment, + alaEServiceUNIProfileCiscoPagpTreatment, + alaEServiceUNIProfileCiscoUdldTreatment, + alaEServiceUNIProfileCiscoCdpTreatment, + alaEServiceUNIProfileCiscoVtpTreatment, + alaEServiceUNIProfileCiscoDtpTreatment, + alaEServiceUNIProfileCiscoPvstTreatment, + alaEServiceUNIProfileCiscoVlanTreatment, + alaEServiceUNIProfileCiscoUplinkTreatment + } + STATUS current + DESCRIPTION + "Collection of objects for management of EService UNI Profiles." + ::= { alcatelIND1EServiceMIBGroups 2 } + +alaEServiceGroup OBJECT-GROUP + OBJECTS + { + alaEServiceSVLAN, + alaEServiceVlanType, + alaEServiceRowStatus, + alaEServiceStatGreenCount, + alaEServiceStatYellowCount, + alaEServiceStatRedCount + } + STATUS current + DESCRIPTION + "Collection of objects for management of E-Services." + ::= { alcatelIND1EServiceMIBGroups 3 } + +alaEServiceSapGroup OBJECT-GROUP + OBJECTS + { + + alaEServiceSapServiceID, + alaEServiceSapProfile, + alaEServiceSapRowStatus + } + STATUS current + DESCRIPTION + "Collection of objects for management of E-Service SAPs." + ::= { alcatelIND1EServiceMIBGroups 4 } + +alaEServiceSapCvlanGroup OBJECT-GROUP + OBJECTS + { + alaEServiceSapCvlanMapType, + alaEServiceSapCvlanRowStatus + + } + STATUS current + DESCRIPTION + "Collection of objects for management of E-Service SAP CVLAN bindings." + ::= { alcatelIND1EServiceMIBGroups 5 } + + +alaEServicePortGroup OBJECT-GROUP + OBJECTS + { + alaEServicePortType, + alaEServicePortVendorTpid, + alaEServicePortLegacyStpBpdu, + alaEServicePortLegacyGvrpPdu, + alaEServicePortUniProfile, + alaEServicePortTransBridging, + alaEServicePortLegacyMvrpPdu + } + STATUS current + DESCRIPTION + "Collection of objects for management of E-Service Ports." + ::= { alcatelIND1EServiceMIBGroups 6 } + +alaEServiceSapUniGroup OBJECT-GROUP + OBJECTS + { + alaEServiceSapUniRowStatus + + } + STATUS current + DESCRIPTION + "Collection of objects for management of E-Service SAP to UNI + Binding." + ::= { alcatelIND1EServiceMIBGroups 7 } + +alaEServiceNniSvlanGroup OBJECT-GROUP + OBJECTS + { + alaEServiceNniSvlanRowStatus, + alaEServiceNniSvlanVpaType + + } + STATUS current + DESCRIPTION + "Collection of objects for management of E-Service SVLAN to NNI + Binding." + ::= { alcatelIND1EServiceMIBGroups 8 } + +alaEServiceSapCvlanPortStatGroup OBJECT-GROUP + OBJECTS + { + alaEServiceSapCvlanPortStatGreenCount, + alaEServiceSapCvlanPortStatYellowCount, + alaEServiceSapCvlanPortStatRedCount + } + STATUS current + DESCRIPTION + "Collection of objects for srTCM and trTCM Counters." + ::= { alcatelIND1EServiceMIBGroups 9 } + +alaEServiceInfoGroup OBJECT-GROUP + OBJECTS + { + alaEServiceMode, + alaEServiceStatReset + } + STATUS current + DESCRIPTION + "Collection of E-Service Global Objects." + ::= { alcatelIND1EServiceMIBGroups 10 } + +END + |