diff options
Diffstat (limited to 'MIBS/nokia/ALCATEL-IND1-ERP-MIB')
| -rw-r--r-- | MIBS/nokia/ALCATEL-IND1-ERP-MIB | 775 |
1 files changed, 775 insertions, 0 deletions
diff --git a/MIBS/nokia/ALCATEL-IND1-ERP-MIB b/MIBS/nokia/ALCATEL-IND1-ERP-MIB new file mode 100644 index 0000000..05c6f4f --- /dev/null +++ b/MIBS/nokia/ALCATEL-IND1-ERP-MIB @@ -0,0 +1,775 @@ +ALCATEL-IND1-ERP-MIB DEFINITIONS ::= BEGIN + + IMPORTS + Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY, + NOTIFICATION-TYPE, OBJECT-TYPE, TimeTicks, Integer32 + FROM SNMPv2-SMI + InterfaceIndex FROM IF-MIB + VlanId FROM Q-BRIDGE-MIB + MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP + FROM SNMPv2-CONF + TimeStamp, RowStatus, TEXTUAL-CONVENTION, TruthValue + FROM SNMPv2-TC + softentIND1Erp FROM ALCATEL-IND1-BASE; + + + alcatelIND1ERPMIB MODULE-IDENTITY + LAST-UPDATED "200807100000Z" -- 07/10/2008 00:00 GMT + ORGANIZATION "Alcatel-Lucent" + CONTACT-INFO + "Please consult with Customer Service to insure the most appropriate + version of this document is used with the products in question: + + Alcatel-Lucent, Enterprise Solutions Division + (Formerly Alcatel Internetworking, Incorporated) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + + DESCRIPTION + "This module describes an authoritative enterprise-specific Simple + Network Management Protocol (SNMP) Management Information Base (MIB): + + For the Birds Of Prey Product Line + ERP Switching is protection switching mechanism for ETH Layer Ethernet Ring + topologies. + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 1995-2008 Alcatel-Lucent, Incorporated + ALL RIGHTS RESERVED WORLDWIDE" + + REVISION "200807100000Z" + + DESCRIPTION + "The ERP MIB defines a set of ERP related management objects for ports + that support Ethernet Ring Protection (ERP) Switching Protocol for ETH + Layer Ring Topologies. With this, rapid protection switching of 50ms can + be achieved. + + This MIB comprises proprietary managed objects as well the objects required + for conforming to the protocol." + ::= { softentIND1Erp 1} + +-- This MIB contains the following groups +alcatelIND1ERPMIBObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For ERP + Subsystem Managed Objects." + ::= { alcatelIND1ERPMIB 1 } + +alaErpNotifications OBJECT IDENTIFIER ::= { alcatelIND1ERPMIB 2 } +alcatelIND1ERPMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1ERPMIB 3 } + +-- alcatelIND1ERPMIBObjects contains following groups + alaErpGlobal OBJECT IDENTIFIER ::= {alcatelIND1ERPMIBObjects 1} + alaErpRingAttributes OBJECT IDENTIFIER ::= {alcatelIND1ERPMIBObjects 2} + + +-- ****************************************************************** +-- Textual conventions +-- ****************************************************************** + +AlaErpRingPortStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Indicates the status of the Ring Port. + + forwarding(1) Status is forwarding. + blocking(2) Status is blocking." + + SYNTAX INTEGER + { + forwarding (1), + blocking (2) + } + +AlaErpRingPortType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Indicates the type of the Ring Port. + + nonRpl(1) Port is Non-RPL Port. + rpl(2) Port is RPL Port. Node is RPL Owner for the Ring." + + SYNTAX INTEGER + { + nonRpl (1), + rpl (2) + } + +AlaErpRingMepId ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Maintenance association End Point Identifier (MEPID): A small + integer, unique over a given Maintenance Association, + identifying a specific MEP." + + REFERENCE + "802.1ag clauses 3.18 and 19.2.1" + + SYNTAX Unsigned32 (1..8191) + +AlaErpRingMEGLevel ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "MEG level of the R-APS PDU to be inserted." + + SYNTAX Unsigned32 (0..7) + + +-- ****************************************************************** +-- ERP Global Variables +-- ****************************************************************** + + +alaErpClearStats OBJECT-TYPE + SYNTAX INTEGER + { + default(0), + reset(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the global clear statistics control for ERP. + The value reset (1) indicates that ERP should clear all + statistics related to all the rings in the system. + By default, this object contains a zero value." + DEFVAL { default } + ::= { alaErpGlobal 1 } + +-- ****************************************************************** +-- ERP Ring Table +-- ****************************************************************** + +alaErpRingTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaErpRingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "There is one ERP Ring table per bridge. It permits + the configuration of Ring." + ::= { alaErpRingAttributes 1 } + +alaErpRingEntry OBJECT-TYPE + SYNTAX AlaErpRingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ERP Ring table entry." + INDEX { alaErpRingId } + ::= { alaErpRingTable 1 } + +AlaErpRingEntry ::= SEQUENCE { + alaErpRingId INTEGER, + alaErpRingServiceVid VlanId, + alaErpRingMEGLevel AlaErpRingMEGLevel, + alaErpRingPort1 InterfaceIndex, + alaErpRingPort2 InterfaceIndex, + alaErpRingStatus INTEGER, + alaErpRingState INTEGER, + alaErpRingWaitToRestoreTimer Unsigned32, + alaErpRingGuardTimer Integer32, + alaErpRingClearStats INTEGER, + alaErpRingLastStateChange TimeStamp, + alaErpRingTimeToRevert TimeTicks, + alaErpRingRowStatus RowStatus + } + +alaErpRingId OBJECT-TYPE + SYNTAX INTEGER (1 .. 2147483647) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Ring identifier that is unique in the bridge." + ::= { alaErpRingEntry 1 } + +alaErpRingServiceVid OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An integer indicating the VID of Service VLAN. All the ERP + control traffic will flow with Service VLAN tag across the + ring. This object must be specified while creating a row in + this table. Once the row has been created, the value of + this object cannot be changed." + ::= { alaErpRingEntry 2 } + +alaErpRingMEGLevel OBJECT-TYPE + SYNTAX AlaErpRingMEGLevel + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "MEG level of the R-APS PDU to be inserted for this Ring. + This object must be specified while creating a row in + this table. Once the row has been created, the value of + this object cannot be changed." + ::= { alaErpRingEntry 3 } + +alaErpRingPort1 OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is the interface index of the ring port,which is + either a bridge port, or an aggregated link within a bridge, + on which ring is configured. + There can be only two ring ports per ring in a bridge. + This object must be specified while creating a row in + this table. Once the row has been created, the value of + this object cannot be changed." + ::= { alaErpRingEntry 4 } + +alaErpRingPort2 OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is the interface index of the ring port,which is + either a bridge port, or an aggregated link within a bridge, + on which ring is configured. + There can be only two ring ports per ring in a bridge. + This object must be specified while creating a row in + this table. Once the row has been created, the value of + this object cannot be changed." + ::= { alaErpRingEntry 5 } + +alaErpRingStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An Integer value indicating the administrative state of the Ring. + + enabled indicates that the Ring is to function normally, and + disabled that it is to cease functioning." + DEFVAL { disabled } + ::= { alaErpRingEntry 6 } + +alaErpRingState OBJECT-TYPE + SYNTAX INTEGER + { + idle (0), + protection (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of the Ring." + ::= { alaErpRingEntry 7 } + +alaErpRingWaitToRestoreTimer OBJECT-TYPE + SYNTAX Unsigned32 ( 0 .. 12) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is valid only for RPL Node. + + This timer is started to prevent frequent operation switch due + to an intermittent defect. + + It may be configured by the operator in 1 minute steps between + 0 and 12 minutes." + DEFVAL { 5 } + ::= { alaErpRingEntry 8 } + +alaErpRingGuardTimer OBJECT-TYPE + SYNTAX Integer32 ( 1 .. 200) + UNITS "10 milliseconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defines the guard timer value in centiseconds. + + This timer is started to prevent the ring nodes from receiving + outdated R-APS messages. + + It may be configured by the operator in 10 ms steps between + 10 ms to 2 seconds." + DEFVAL { 50 } + ::= { alaErpRingEntry 9 } + +alaErpRingClearStats OBJECT-TYPE + SYNTAX INTEGER + { + default(0), + reset(1) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defines per ring clear statistics control for ERP. + The value reset (1) indicates that ERP should clear all + statistics related to a ring in the system.By default, + this object contains a zero value." + DEFVAL { default } + ::= { alaErpRingEntry 10 } + + +alaErpRingLastStateChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time (SysUpTime) at which the ethernet ring last + entered either the IDLE or PROTECTION state." + ::= { alaErpRingEntry 11 } + +alaErpRingTimeToRevert OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the time left to revert from Protection State to Idle State." + ::= {alaErpRingEntry 12} + +alaErpRingRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the row. + + The writable columns in a row can not be changed if the row + is active. All columns must have a valid value before a row + can be activated." + ::= { alaErpRingEntry 13 } + +-- ****************************************************************** +-- The ERP RING Port Table +-- ****************************************************************** + +alaErpRingPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaErpRingPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "There is one ERP Ring Port table per bridge. It permits + the configuration of Ring Ports." + ::= { alaErpRingAttributes 2 } + +alaErpRingPortEntry OBJECT-TYPE + SYNTAX AlaErpRingPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ERP Ring Port table entry." + INDEX { alaErpRingId, alaErpRingPortIfIndex } + ::= { alaErpRingPortTable 1 } + +AlaErpRingPortEntry ::= SEQUENCE { + alaErpRingPortIfIndex InterfaceIndex, + alaErpRingPortStatus AlaErpRingPortStatus, + alaErpRingPortType AlaErpRingPortType, + alaErpRingPortEthOAMEvent TruthValue, + alaErpRingPortClearStats INTEGER, + alaErpRingPortRmepId AlaErpRingMepId + } + +alaErpRingPortIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This object is the interface index of the interface either a + bridge port, or an aggregated link within a bridge port, to + which ring port is configured. + There can be only two ring ports per ring in a bridge." + ::= { alaErpRingPortEntry 1 } + +alaErpRingPortStatus OBJECT-TYPE + SYNTAX AlaErpRingPortStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of the Ring Port." + DEFVAL { blocking } + ::= { alaErpRingPortEntry 2 } + +alaErpRingPortType OBJECT-TYPE + SYNTAX AlaErpRingPortType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Type of the Ring Port. + + To configure a node as a RPL owner for the ring, this object + has value of RPL(2)." + DEFVAL { nonRpl } + ::= { alaErpRingPortEntry 3 } + +alaErpRingPortEthOAMEvent OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A Boolean indicating whether ERP Ring Port shall take loss of + connectivity event from Ethernet OAM. + + True indicates that the Ring Port is to take events from + Ethernet OAM." + DEFVAL { false } + ::= { alaErpRingPortEntry 4 } + +alaErpRingPortClearStats OBJECT-TYPE + SYNTAX INTEGER + { + default(0), + reset(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines per ring port clear statistics control for ERP. + The value reset (1) indicates that ERP should clear all + statistics related to a ring port in the system.By default, + this object contains a zero value." + DEFVAL { default } + ::= { alaErpRingPortEntry 5 } + +alaErpRingPortRmepId OBJECT-TYPE + SYNTAX AlaErpRingMepId + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Identifier of Remote Endpoint." + ::= { alaErpRingPortEntry 6 } + +-- ****************************************************************** +-- The ERP VLAN Table +-- ****************************************************************** + +alaErpRingVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaErpRingVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines the association of VIDs and RingIds. + + The writable objects in this table need to be persistent + upon reboot or restart of a device." + ::= { alaErpRingAttributes 3 } + +alaErpRingVlanEntry OBJECT-TYPE + SYNTAX AlaErpRingVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The VLAN table entry." + INDEX { alaErpRingId, alaErpRingVlanProtectedVid } + ::= { alaErpRingVlanTable 1 } + +AlaErpRingVlanEntry ::= SEQUENCE { + alaErpRingVlanProtectedVid VlanId, + alaErpRingVlanRowStatus RowStatus + } + +alaErpRingVlanProtectedVid OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An integer indicating the VID of Protected VLAN." + ::= { alaErpRingVlanEntry 1 } + +alaErpRingVlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the row. + + The writable columns in a row can not be changed if the row + is active. All columns must have a valid value before a row + can be activated." + ::= { alaErpRingVlanEntry 2 } + +-- ****************************************************************** +-- The ERP Statistics Table +-- ****************************************************************** + +alaErpStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaErpStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "There is one ERP Stats table per bridge. This table + contains the statistics for the ERP on per Ring basis." + ::= { alaErpRingAttributes 4 } + +alaErpStatsEntry OBJECT-TYPE + SYNTAX AlaErpStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Statistics table entry." + AUGMENTS { alaErpRingPortEntry } + ::= { alaErpStatsTable 1 } + +AlaErpStatsEntry ::= SEQUENCE { + alaErpStatsSignalFailPduTx Counter32, + alaErpStatsSignalFailPduRx Counter32, + alaErpStatsSignalFailPduDrop Counter32, + alaErpStatsNoRequestPduTx Counter32, + alaErpStatsNoRequestPduRx Counter32, + alaErpStatsNoRequestPduDrop Counter32, + alaErpStatsRPLBlockPDUTx Counter32, + alaErpStatsRPLBlockPDURx Counter32, + alaErpStatsRPLBlockPDUDrop Counter32, + alaErpStatsPDUErr Counter32 + } + +alaErpStatsSignalFailPduTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of R-APS (SF) PDUs transmitted on this + interface for this Ring." + ::= { alaErpStatsEntry 1 } + +alaErpStatsSignalFailPduRx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of valid R-APS (SF) PDUs received on this + interface for this Ring." + ::= { alaErpStatsEntry 2 } + +alaErpStatsSignalFailPduDrop OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of valid R-APS (SF) PDUs dropped." + ::= { alaErpStatsEntry 3 } + + +alaErpStatsNoRequestPduTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of R-APS (NR) PDUs transmitted on this + interface for this Ring." + ::= { alaErpStatsEntry 4 } + +alaErpStatsNoRequestPduRx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of valid R-APS (NR) PDUs received on this + interface for this Ring." + ::= { alaErpStatsEntry 5 } + +alaErpStatsNoRequestPduDrop OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of valid R-APS (NR) PDUs dropped." + ::= { alaErpStatsEntry 6 } + +alaErpStatsRPLBlockPDUTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of R-APS (NR, RB) PDUs transmitted on this + interface for this Ring." + ::= { alaErpStatsEntry 7 } + +alaErpStatsRPLBlockPDURx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of valid R-APS (NR, RB) PDUs received on this + interface for this Ring." + ::= { alaErpStatsEntry 8 } + +alaErpStatsRPLBlockPDUDrop OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of valid R-APS (NR, RB) PDUs dropped." + ::= { alaErpStatsEntry 9 } + +alaErpStatsPDUErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of the number of error R-APS PDUs received." + ::= { alaErpStatsEntry 10 } + +-- ****************************************************************** +-- NOTIFICATIONS (TRAPS) +-- ****************************************************************** + +alaErpNotificationsRoot OBJECT IDENTIFIER ::= { alaErpNotifications 0 } + + alaErpRingStateChanged NOTIFICATION-TYPE + OBJECTS { + alaErpRingId, + alaErpRingState + } + STATUS current + DESCRIPTION + "The ERP Ring State has changed to Protection from Idle. Notify the user by + raising the Trap. " + ::= { alaErpNotificationsRoot 1 } + + alaErpRingMultipleRpl NOTIFICATION-TYPE + OBJECTS { + alaErpRingId + } + STATUS current + DESCRIPTION + "The trap shall be raised on RPL if there are multiple RPLs detected in the + ring. When the RPL node receives the NR (RB) message, this trap is raised." + ::= { alaErpNotificationsRoot 2} + + alaErpRingRemoved NOTIFICATION-TYPE + OBJECTS { + alaErpRingId + } + STATUS current + DESCRIPTION + "The trap shall be raised whenever the ring is removed dynamically in + Unlike NI Scenario only." + ::= { alaErpNotificationsRoot 3 } + + alaErpRingPortStatusChanged NOTIFICATION-TYPE + OBJECTS { + alaErpRingId, + alaErpRingPortIfIndex, + alaErpRingPortStatus + } + STATUS current + DESCRIPTION + "The trap shall be raised whenever the ring port status is changed." + ::= { alaErpNotificationsRoot 4 } + + +-- ****************************************************************** +-- CONFORMANCE +-- ****************************************************************** + + alcatelIND1ERPMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1ERPMIBConformance 1 } + alcatelIND1ERPMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1ERPMIBConformance 2 } + +-- ****************************************************************** + +-- ****************************************************************** +-- COMPLIANCE +-- ****************************************************************** + alcatelIND1ERPMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for ERP." + MODULE + MANDATORY-GROUPS + { + alaErpGlobalGroup, + alaErpRingAttributesGroup, + alaErpNotificationGroup + } + ::= { alcatelIND1ERPMIBCompliances 1 } + +-- ****************************************************************** +-- MIB Grouping +-- ****************************************************************** + +alaErpGlobalGroup OBJECT-GROUP + OBJECTS + { + alaErpClearStats + } + STATUS current + DESCRIPTION + "Objects for the Global Group." + ::={alcatelIND1ERPMIBGroups 1 } + +alaErpRingAttributesGroup OBJECT-GROUP + OBJECTS + { + alaErpRingServiceVid, + alaErpRingMEGLevel, + alaErpRingPort1, + alaErpRingPort2, + alaErpRingStatus, + alaErpRingState, + alaErpRingWaitToRestoreTimer, + alaErpRingGuardTimer, + alaErpRingClearStats, + alaErpRingLastStateChange, + alaErpRingTimeToRevert, + alaErpRingRowStatus, + alaErpRingPortStatus, + alaErpRingPortType, + alaErpRingPortEthOAMEvent, + alaErpRingPortClearStats, + alaErpRingPortRmepId, + alaErpRingVlanRowStatus, + alaErpStatsSignalFailPduTx, + alaErpStatsSignalFailPduRx, + alaErpStatsSignalFailPduDrop, + alaErpStatsNoRequestPduTx, + alaErpStatsNoRequestPduRx, + alaErpStatsNoRequestPduDrop, + alaErpStatsRPLBlockPDUTx, + alaErpStatsRPLBlockPDURx, + alaErpStatsRPLBlockPDUDrop, + alaErpStatsPDUErr + } + STATUS current + DESCRIPTION + "Objects for the Ring Group." + ::={alcatelIND1ERPMIBGroups 2 } + +alaErpNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS + { + alaErpRingStateChanged, + alaErpRingMultipleRpl, + alaErpRingRemoved, + alaErpRingPortStatusChanged + } + STATUS current + DESCRIPTION + "Collection of notifications for ERP." + ::= { alcatelIND1ERPMIBGroups 3 } +END + |