diff options
Diffstat (limited to 'MIBS/nokia/ALCATEL-IND1-PARTITIONED-MGR-MIB')
| -rw-r--r-- | MIBS/nokia/ALCATEL-IND1-PARTITIONED-MGR-MIB | 477 |
1 files changed, 477 insertions, 0 deletions
diff --git a/MIBS/nokia/ALCATEL-IND1-PARTITIONED-MGR-MIB b/MIBS/nokia/ALCATEL-IND1-PARTITIONED-MGR-MIB new file mode 100644 index 0000000..19e201d --- /dev/null +++ b/MIBS/nokia/ALCATEL-IND1-PARTITIONED-MGR-MIB @@ -0,0 +1,477 @@ +ALCATEL-IND1-PARTITIONED-MGR-MIB DEFINITIONS ::= BEGIN + +IMPORTS + OBJECT-TYPE, + OBJECT-IDENTITY, + MODULE-IDENTITY FROM SNMPv2-SMI + TEXTUAL-CONVENTION FROM SNMPv2-TC + OBJECT-GROUP, + MODULE-COMPLIANCE FROM SNMPv2-CONF + VlanId FROM Q-BRIDGE-MIB + SnmpAdminString FROM SNMP-FRAMEWORK-MIB + RowStatus FROM SNMPv2-TC + softentIND1Partmgr FROM ALCATEL-IND1-BASE; + +alcatelIND1PartitionedMgrMIB MODULE-IDENTITY + LAST-UPDATED "200704030000Z" + ORGANIZATION "Alcatel-Lucent" + CONTACT-INFO + "Please consult with Customer Service to ensure the most appropriate + version of this document is used with the products in question: + + Alcatel-Lucent, Enterprise Solutions Division + (Formerly Alcatel Internetworking, Incorporated) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + DESCRIPTION + "This module describes an authoritative enterprise-specific Simple + Network Management Protocol (SNMP) Management Information Base (MIB): + + For the Birds Of Prey Product Line + User Partitioned Manager Subsystem. + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 1995-2007 Alcatel-Lucent + ALL RIGHTS RESERVED WORLDWIDE" + ::= { softentIND1Partmgr 1} + + alcatelIND1PartitionedMgrMIBObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Partitioned Manager Subsystem Managed Objects." + ::= { alcatelIND1PartitionedMgrMIB 1 } + + + alcatelIND1PartitionedMgrMIBConformance OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Partitioned Manager Subsystem Conformance Information." + ::= { alcatelIND1PartitionedMgrMIB 2 } + + + alcatelIND1PartitionedMgrMIBGroups OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Partitioned Manager Subsystem Units Of Conformance." + ::= { alcatelIND1PartitionedMgrMIBConformance 1 } + + + alcatelIND1PartitionedMgrMIBCompliances OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Partitioned Manager Subsystem Compliance Statements." + ::= { alcatelIND1PartitionedMgrMIBConformance 2 } + +-- End User Partitioned Management + + endUserProfileMgrMIB OBJECT IDENTIFIER ::= { alcatelIND1PartitionedMgrMIBObjects 1 } + +-- ------------------------------------------------------------- +-- Textual Conventions +-- ------------------------------------------------------------- + + EndUserPortList ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The port number 1 to 64 for one slot" + SYNTAX BITS { + port1(0), + port2(1), + port3(2), + port4(3), + port5(4), + port6(5), + port7(6), + port8(7), + port9(8), + port10(9), + port11(10), + port12(11), + port13(12), + port14(13), + port15(14), + port16(15), + port17(16), + port18(17), + port19(18), + port20(19), + port21(20), + port22(21), + port23(22), + port24(23), + port25(24), + port26(25), + port27(26), + port28(27), + port29(28), + port30(29), + port31(30), + port32(31), + port33(32), + port34(33), + port35(34), + port36(35), + port37(36), + port38(37), + port39(38), + port40(39), + port41(40), + port42(41), + port43(42), + port44(43), + port45(44), + port46(45), + port47(46), + port48(47), + port49(48), + port50(49), + port51(50), + port52(51), + port53(52), + port54(53), + port55(54), + port56(55), + port57(56), + port58(57), + port59(58), + port60(59), + port61(60), + port62(61), + port63(62), + port64(63) + } + + EndUserProfileArea ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The accessible rights for an area." + SYNTAX INTEGER { + disable (1), + readOnly (2), + readWrite (3) + } + +-- ------------------------------------------------------------- +-- End User Profile configuration table +-- ------------------------------------------------------------- + + endUserProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF EndUserProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The configuration parameters of a end user profile." + ::= { endUserProfileMgrMIB 1 } + + endUserProfileEntry OBJECT-TYPE + SYNTAX EndUserProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of the end user profile table." + INDEX { IMPLIED endUserProfileName } + ::= { endUserProfileTable 1 } + + EndUserProfileEntry ::= SEQUENCE { + endUserProfileName SnmpAdminString, + endUserProfileAreaPhysical EndUserProfileArea, + endUserProfileAreaVlanTable EndUserProfileArea, + endUserProfileAreaBasicIpRouting EndUserProfileArea, + endUserProfileAreaIpRoutesTable EndUserProfileArea, + endUserProfileAreaMacFilteringTable EndUserProfileArea, + endUserProfileAreaSpantree EndUserProfileArea, + endUserProfileRowStatus RowStatus + } + + endUserProfileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The End User profile name." + ::= { endUserProfileEntry 1 } + + endUserProfileAreaPhysical OBJECT-TYPE + SYNTAX EndUserProfileArea + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The accessible rights for the port area." + DEFVAL { disable } + ::= { endUserProfileEntry 2 } + + endUserProfileAreaVlanTable OBJECT-TYPE + SYNTAX EndUserProfileArea + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The accessible rights for the vlan area." + DEFVAL { disable } + ::= { endUserProfileEntry 3 } + + endUserProfileAreaBasicIpRouting OBJECT-TYPE + SYNTAX EndUserProfileArea + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The accessible rights for the basic-routing area." + DEFVAL { disable } + ::= { endUserProfileEntry 4 } + + endUserProfileAreaIpRoutesTable OBJECT-TYPE + SYNTAX EndUserProfileArea + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The accessible rights for the ip-routes area." + DEFVAL { disable } + ::= { endUserProfileEntry 5 } + + endUserProfileAreaMacFilteringTable OBJECT-TYPE + SYNTAX EndUserProfileArea + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The accessible rights for the mac-address-table area." + DEFVAL { disable } + ::= { endUserProfileEntry 6 } + + endUserProfileAreaSpantree OBJECT-TYPE + SYNTAX EndUserProfileArea + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The accessible rights for the spanning-tree area." + DEFVAL { disable } + ::= { endUserProfileEntry 7 } + + endUserProfileRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of this table entry. + Reading or writing values : + - active (1) : end User Profile created and OK + - notInService (2) : not used for end User Profile + Only reading values : + - notReady (3) : missing parameters for the end User profile + Only writing values : + - createAndGo (4) : to create an end User Profile + - createAndWait (5) : not used for end User Profile + - destroy (6) : to remove a end User Profile." + ::= { endUserProfileEntry 8 } + +-- ------------------------------------------------------------- +-- End User Profile Slot Port table +-- ------------------------------------------------------------- + + endUserProfileSlotPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF EndUserProfileSlotPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of slot/port of a end user." + ::= { endUserProfileMgrMIB 2 } + + endUserProfileSlotPortEntry OBJECT-TYPE + SYNTAX EndUserProfileSlotPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of the end user profile slot/port table." + INDEX {endUserProfileSlotNumber, IMPLIED endUserProfileName} + ::= { endUserProfileSlotPortTable 1 } + + EndUserProfileSlotPortEntry ::= SEQUENCE { + endUserProfileSlotNumber INTEGER, + endUserProfilePortList EndUserPortList, + endUserProfileSlotPortRowStatus RowStatus + } + + endUserProfileSlotNumber OBJECT-TYPE + SYNTAX INTEGER (1..16) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of the physical slot contained + in the profile." + ::= { endUserProfileSlotPortEntry 1 } + + endUserProfilePortList OBJECT-TYPE + SYNTAX EndUserPortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A string of 64 bits, + corresponding to the port number 1 to 64. + The first bit corresponds to port 1, + the second bit to port 2 until + the 64 bit corresponding to the port 64." + ::= { endUserProfileSlotPortEntry 2 } + + endUserProfileSlotPortRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of this table entry. + Reading or writing values : + - active (1) : end User Profile Slot/Port created and OK + - notInService (2) : not used for end User Profile Slot/Port + Only reading values : + - notReady (3) : missing parameters for the end User profile Slot/Port + Only writing values : + - createAndGo (4) : to create an end User Profile Slot/Port + - createAndWait (5) : not used for end User Profile Slot/Port + - destroy (6) : to remove a end User Profile Slot/Port." + ::= { endUserProfileSlotPortEntry 3 } + +-- ------------------------------------------------------------- +-- End User Profile Vlan Id table +-- ------------------------------------------------------------- + + endUserProfileVlanIdTable OBJECT-TYPE + SYNTAX SEQUENCE OF EndUserProfileVlanIdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of vlan ids of a end user." + ::= { endUserProfileMgrMIB 3 } + + endUserProfileVlanIdEntry OBJECT-TYPE + SYNTAX EndUserProfileVlanIdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of the end user profile Vlan Ids table." + INDEX {endUserProfileVlanIdStart, IMPLIED endUserProfileName} + ::= { endUserProfileVlanIdTable 1 } + + EndUserProfileVlanIdEntry ::= SEQUENCE { + endUserProfileVlanIdStart VlanId, + endUserProfileVlanIdEnd VlanId, + endUserProfileVlanIdRowStatus RowStatus + } + + endUserProfileVlanIdStart OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The End User Profile Vlan Id Start in a range." + ::= { endUserProfileVlanIdEntry 1 } + + endUserProfileVlanIdEnd OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The End User Profile Vlan Id End in a range." + ::= { endUserProfileVlanIdEntry 2 } + + endUserProfileVlanIdRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of this table entry. + Reading or writing values : + - active (1) : end User Profile Vlan Ids created and OK + - notInService (2) : not used for end User Profile Vlan Ids + Only reading values : + - notReady (3) : missing parameters for the end User profile Vlan Ids + Only writing values : + - createAndGo (4) : to create an end User Profile Vlan Ids + - createAndWait (5) : not used for end User Profile Vlan Ids + - destroy (6) : to remove a end User Profile Vlan Ids." + ::= { endUserProfileVlanIdEntry 3 } + + +-- ------------------------------------------------------------- +-- Compliance Statements +-- ------------------------------------------------------------- + + alcatelIND1PartitionedMgrMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for Partitioned Manager Subsystem." + MODULE -- this module + MANDATORY-GROUPS + { + endUserProfileGroup, + endUserProfileSlotPortGroup, + endUserProfileVlanIdGroup + } + ::= { alcatelIND1PartitionedMgrMIBCompliances 1 } + + +-- ------------------------------------------------------------- +-- Units Of Conformance +-- ------------------------------------------------------------- + + endUserProfileGroup OBJECT-GROUP + OBJECTS + { + endUserProfileName, -- End User Profile configuration table + endUserProfileAreaPhysical, + endUserProfileAreaVlanTable, + endUserProfileAreaBasicIpRouting, + endUserProfileAreaIpRoutesTable, + endUserProfileAreaMacFilteringTable, + endUserProfileAreaSpantree, + endUserProfileRowStatus + } + STATUS current + DESCRIPTION + "Collection of end UserProfile for management of Partitioned Manager." + ::= { alcatelIND1PartitionedMgrMIBGroups 1 } + + + endUserProfileSlotPortGroup OBJECT-GROUP + OBJECTS + { + endUserProfileSlotNumber, -- End User Profile Slot Port table + endUserProfilePortList, + endUserProfileSlotPortRowStatus + } + STATUS current + DESCRIPTION + "Collection of end UserProfile slot/port for management of Partitioned Manager." + ::= { alcatelIND1PartitionedMgrMIBGroups 2 } + + + endUserProfileVlanIdGroup OBJECT-GROUP + OBJECTS + { + endUserProfileVlanIdStart, -- End User Profile Vlan Id table + endUserProfileVlanIdEnd, + endUserProfileVlanIdRowStatus + } + STATUS current + DESCRIPTION + "Collection of end UserProfile Vlan ids for management of Partitioned Manager." + ::= { alcatelIND1PartitionedMgrMIBGroups 3 } + +END |