diff options
Diffstat (limited to 'MIBS/nokia/ALCATEL-IND1-UDLD-MIB')
| -rw-r--r-- | MIBS/nokia/ALCATEL-IND1-UDLD-MIB | 623 |
1 files changed, 623 insertions, 0 deletions
diff --git a/MIBS/nokia/ALCATEL-IND1-UDLD-MIB b/MIBS/nokia/ALCATEL-IND1-UDLD-MIB new file mode 100644 index 0000000..0970219 --- /dev/null +++ b/MIBS/nokia/ALCATEL-IND1-UDLD-MIB @@ -0,0 +1,623 @@ +ALCATEL-IND1-UDLD-MIB DEFINITIONS ::= BEGIN + + IMPORTS + Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY, + NOTIFICATION-TYPE, OBJECT-TYPE + FROM SNMPv2-SMI + InterfaceIndex FROM IF-MIB + MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP + FROM SNMPv2-CONF + DisplayString, MacAddress FROM SNMPv2-TC + softentIND1Udld FROM ALCATEL-IND1-BASE; + + + alcatelIND1UDLDMIB MODULE-IDENTITY + LAST-UPDATED "200702140000Z" + ORGANIZATION "Alcatel - Architects Of An Internet World" + CONTACT-INFO + "Please consult with Customer Service to insure the most appropriate + version of this document is used with the products in question: + + Alcatel Internetworking, Incorporated + (Division 1, Formerly XYLAN Corporation) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://www.ind.alcatel.com + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + + DESCRIPTION + "This module describes an authoritative enterprise-specific Simple + Network Management Protocol (SNMP) Management Information Base (MIB): + + For the Birds Of Prey Product Line + UDLD for detection and disabling unidirectional links. + + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated + ALL RIGHTS RESERVED WORLDWIDE" + + REVISION "200702140000Z" + DESCRIPTION + "The UDLD MIB defines a set of UDLD related management objects for ports + that support UniDirectional Link Detection (UDLD) Protocol. UDLD as a + protocol provides mechanisms to detect and disable unidirectional links + caused for instance by mis-wiring of fiber strands, interface malfunctions, + media converters' faults, etc. It operates at Layer 2 in conjunction + with IEEE 802.3's existing Layer 1 fault detection mechanisms. + + This MIB comprises proprietary managed objects as well the objects required + for conforming to the protocol." + ::= { softentIND1Udld 1} + +-- -------------------------------------------------------------- + alcatelIND1UDLDMIBObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For UDLD + Subsystem Managed Objects." + ::= { alcatelIND1UDLDMIB 1 } + + alcatelIND1UDLDMIBConformance OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch for UDLD Module MIB Subsystem Conformance Information." + ::= { alcatelIND1UDLDMIB 2 } + + alcatelIND1UDLDMIBGroups OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch for UDLD Module MIB Subsystem Units of Conformance." + ::= { alcatelIND1UDLDMIBConformance 1 } + + alcatelIND1UDLDMIBCompliances OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch for UDLD Module MIB Subsystem Compliance Statements." + ::= { alcatelIND1UDLDMIBConformance 2 } + +-- -------------------------------------------------------------- + +-- -------------------------------------------------------------- +-- UDLD MIB +-- -------------------------------------------------------------- + + alaUdldGlobalStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable is used to enable or diable UDLD on the switch. + The value enable (1) indicates that UDLD should be enabled on + the switch. The value disable (2) is used to disable UDLD on + the switch. By default, UDLD is disabled on the switch." + DEFVAL { disable } + ::= { alcatelIND1UDLDMIBObjects 1 } + + alaUdldGlobalClearStats OBJECT-TYPE + SYNTAX INTEGER { + default(0), + reset(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the global clear statistics control for UDLD. + The value reset (1) indicates that UDLD should clear all + statistic counters related to all ports in the system. + By default, this object contains a zero value." + DEFVAL { default } + ::= { alcatelIND1UDLDMIBObjects 2 } + + + alaUdldGlobalConfigUdldMode OBJECT-TYPE + SYNTAX INTEGER { + normal (1), + aggressive (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the mode of operation of the UDLD protocol on the interface. + normal - The UDLD state machines participates normally in UDLD protocol + exchanges. The protocol determination at the end of detection + process is always based upon information received in UDLD messages. + aggressive - UDLD will shut down all port even in case it loses bidirectional + connectivity with the neighbor for a defined period of time." + DEFVAL { normal } + ::= { alcatelIND1UDLDMIBObjects 3 } + + + alaUdldGlobalConfigUdldProbeIntervalTimer OBJECT-TYPE + SYNTAX Unsigned32 ( 7 .. 90 ) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum period of time after which the Probe message is expected + from the neighbor. The range supported is 7-90 seconds." + DEFVAL { 15 } + ::= { alcatelIND1UDLDMIBObjects 4 } + + alaUdldGlobalConfigUdldDetectionPeriodTimer OBJECT-TYPE + SYNTAX Unsigned32 (4 .. 15) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum period of time before which detection of neighbor is expected. + If Reply to the Sent Echo message/(s) is not received before, the + timer for detection period expires, the link is detected as faulty and the + associated port state is marked Undetermined/Shutdown (depending upon the + UDLD operation-mode is Normal/Aggressive)." + DEFVAL { 8 } + ::= { alcatelIND1UDLDMIBObjects 5 } + + +-- ------------------------------------------------------------- +-- UDLD Port Config Table +-- ------------------------------------------------------------- + +-- DESCRIPTION: +-- "Port configuration information +-- data for the UDLD Module. +-- Implementation of this group is mandantory" + + + udldPortConfig OBJECT IDENTIFIER ::= { alcatelIND1UDLDMIBObjects 6 } + + + alaUdldPortConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaUdldPortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing UDLD port configuration information." + ::= { udldPortConfig 1 } + + alaUdldPortConfigEntry OBJECT-TYPE + SYNTAX AlaUdldPortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A UDLD port configuration entry." + INDEX { alaUdldPortConfigIfIndex } + ::= { alaUdldPortConfigTable 1 } + + AlaUdldPortConfigEntry ::= SEQUENCE { + alaUdldPortConfigIfIndex InterfaceIndex, + alaUdldPortConfigUdldStatus INTEGER, + alaUdldPortConfigUdldMode INTEGER, + alaUdldPortConfigUdldProbeIntervalTimer Unsigned32, + alaUdldPortConfigUdldDetectionPeriodTimer Unsigned32, + alaUdldPortConfigUdldOperationalStatus INTEGER + } + + alaUdldPortConfigIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifindex of the port on which UDLD is running" + ::= { alaUdldPortConfigEntry 1 } + + alaUdldPortConfigUdldStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable is used to enable or diable UDLD on the interface. + The value enable (1) indicates that UDLD should be enabled on + the interface. The value disable (2) is used to disable UDLD on + the interface. By default, UDLD is disabled on the interface." + DEFVAL { disable } + ::= { alaUdldPortConfigEntry 2 } + + + alaUdldPortConfigUdldMode OBJECT-TYPE + SYNTAX INTEGER { + normal (1), + aggressive (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the mode of operation of the UDLD protocol on the interface. + normal - The UDLD state machines participates normally in UDLD protocol + exchanges. The protocol determination at the end of detection + process is always based upon information received in UDLD messages. + aggressive - UDLD will shut down a port even in case it loses bidirectional + connectivity with the neighbor for a defined period of time." + DEFVAL { normal } + ::= { alaUdldPortConfigEntry 3 } + + + alaUdldPortConfigUdldProbeIntervalTimer OBJECT-TYPE + SYNTAX Unsigned32 ( 7 .. 90 ) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum period of time after which the Probe message is expected + from the neighbor. The range supported is 7-90 seconds." + DEFVAL { 15 } + ::= { alaUdldPortConfigEntry 4 } + + alaUdldPortConfigUdldDetectionPeriodTimer OBJECT-TYPE + SYNTAX Unsigned32 (4 .. 15) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum period of time before which detection of neighbor is expected. + If Reply to the Sent Echo message/(s) is not received before, the + timer for detection period expires, the link is detected as faulty and the + associated port state is marked Undetermined/Shutdown (depending upon the + UDLD operation-mode is Normal/Aggressive)." + DEFVAL { 8 } + ::= { alaUdldPortConfigEntry 5 } + + alaUdldPortConfigUdldOperationalStatus OBJECT-TYPE + SYNTAX INTEGER { + notapplicable (0), + shutdown (1), + undetermined (2), + bidirectional (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the interface as determined by UDLD operation." + ::= { alaUdldPortConfigEntry 6 } + + + +-- ------------------------------------------------------------- +-- UDLD Statistics Table +-- ------------------------------------------------------------- + +-- DESCRIPTION: +-- "Statistics parameters information +-- data for the UDLD Module. +-- Implementation of this group is mandantory" + + + udldPortStats OBJECT IDENTIFIER ::= { alcatelIND1UDLDMIBObjects 7 } + + alaUdldPortStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaUdldPortStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing UDLD statistics information." + ::= { udldPortStats 1 } + + alaUdldPortStatsEntry OBJECT-TYPE + SYNTAX AlaUdldPortStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A UDLD Statistics entry (per port)." + INDEX { alaUdldPortStatsIfIndex } + ::= { alaUdldPortStatsTable 1 } + + AlaUdldPortStatsEntry ::= SEQUENCE { + alaUdldPortStatsIfIndex InterfaceIndex, + alaUdldNumUDLDNeighbors Unsigned32, + alaUdldPortStatsClear INTEGER, + alaUdldPortNumProbeSent Counter32 , + alaUdldPortNumEchoSent Counter32, + alaUdldPortNumInvalidRcvd Counter32, + alaUdldPortNumFlushRcvd Counter32 + } + + alaUdldPortStatsIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifindex of the port on which UDLD is running" + ::= { alaUdldPortStatsEntry 1 } + + alaUdldNumUDLDNeighbors OBJECT-TYPE + SYNTAX Unsigned32 ( 0 .. 128 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object gives the number of neighbors for the interface." + ::= { alaUdldPortStatsEntry 2 } + + alaUdldPortStatsClear OBJECT-TYPE + SYNTAX INTEGER { + default(0), + reset(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Reset all statistics parameters corresponding to this port. + By default, this objects contains a zero value." + DEFVAL { default } + ::= { alaUdldPortStatsEntry 3} + + alaUdldPortNumProbeSent OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Probe message sent by a port." + ::= {alaUdldPortStatsEntry 4} + + alaUdldPortNumEchoSent OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Echo message sent by a port." + ::= {alaUdldPortStatsEntry 5} + + alaUdldPortNumInvalidRcvd OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Invalid message received by a port." + ::= {alaUdldPortStatsEntry 6} + + alaUdldPortNumFlushRcvd OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of UDLD-Flush message received by a port." + ::= {alaUdldPortStatsEntry 7} + + udldPortNeighborStats OBJECT IDENTIFIER ::= { alcatelIND1UDLDMIBObjects 8 } + + alaUdldPortNeighborStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaUdldPortNeighborStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "UDLD port's PDU related statistics for a neighbor." + ::= { udldPortNeighborStats 1 } + + alaUdldPortNeighborStatsEntry OBJECT-TYPE + SYNTAX AlaUdldPortNeighborStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A UDLD Statistics entry (per port, per neighbor)." + INDEX { alaUdldPortNeighborStatsIfIndex, alaUdldNeighborIfIndex } + ::= { alaUdldPortNeighborStatsTable 1 } + + AlaUdldPortNeighborStatsEntry ::= SEQUENCE { + alaUdldPortNeighborStatsIfIndex InterfaceIndex, + alaUdldNeighborIfIndex MacAddress, + alaUdldNeighborName DisplayString, + alaUdldNumHelloRcvd Counter32, + alaUdldNumEchoRcvd Counter32 + } + + alaUdldPortNeighborStatsIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifindex of the port on which UDLD is running" + ::= { alaUdldPortNeighborStatsEntry 1 } + + alaUdldNeighborIfIndex OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index of the neighbor to which the Statistics belong" + ::= { alaUdldPortNeighborStatsEntry 2 } + + alaUdldNeighborName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the neighbor" + DEFVAL { "" } + ::= {alaUdldPortNeighborStatsEntry 3} + + alaUdldNumHelloRcvd OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object gives the number of hello messages recieved from the neighbor for this interface." + ::= { alaUdldPortNeighborStatsEntry 4 } + + alaUdldNumEchoRcvd OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object gives the number of echo messages received from the neighbor for this interface." + ::= { alaUdldPortNeighborStatsEntry 5 } + + + + +-- -------------------------------------------------------------- +-- NOTIFICATIONS (TRAPS) +-- These notifications will be sent to the management entity, whenever the UDLD-state +-- of a port gets changed - +-- whenever UDLD state of any port changes from BIDIRECTIONAL to UNDETERMINED +-- whenever UDLD state of any port changes from BIDIRECTIONAL to SHUTDOWN +-- whenever UDLD state of any port changes from UNDETERMINED to SHUTDOWN +-- whenever UDLD state of any port changes from UNDETERMINED to BIDIRECTIONAL +-- whenever UDLD state of any port changes from SHUTDOWN to BIDIRECTIONAL +-- -------------------------------------------------------------- + + alaUdldPrevState OBJECT-TYPE + SYNTAX INTEGER { + notapplicable (0), + shutdown (1), + undetermined (2), + bidirectional (3) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The previous UDLD state of the Port." + ::= { alcatelIND1UDLDMIBObjects 9 } + + alaUdldCurrentState OBJECT-TYPE + SYNTAX INTEGER { + notapplicable (0), + shutdown (1), + undetermined (2), + bidirectional (3) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The current UDLD state of the Port." + ::= { alcatelIND1UDLDMIBObjects 10 } + + alaUdldPortIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The ifindex of the port on which UDLD trap is raised" + ::= { alcatelIND1UDLDMIBObjects 11 } + + alaUdldEvents OBJECT IDENTIFIER ::= { alcatelIND1UDLDMIB 3 } + + udldStateChange NOTIFICATION-TYPE + OBJECTS { + alaUdldPortIfIndex, + alaUdldPrevState, + alaUdldCurrentState + } + STATUS current + DESCRIPTION + "The UDLD-state of port has changed. Notify the user by + raising the Trap. Notify the Management Entity the previous + UDLD-state and UDLD-Current." + ::= { alaUdldEvents 0 1 } + +-- ------------------------------------------------------------- + +-- ------------------------------------------------------------- +-- UNITS OF CONFORMANCE +-- ------------------------------------------------------------- + +udldPortBaseGroup OBJECT-GROUP + OBJECTS + { + alaUdldGlobalStatus, + alaUdldGlobalClearStats, + alaUdldPrevState, + alaUdldCurrentState, + alaUdldPortIfIndex + } + STATUS current + DESCRIPTION + "Collection of objects for management of UDLD Base Group." + ::= { alcatelIND1UDLDMIBGroups 1 } + +udldPortConfigGroup OBJECT-GROUP + OBJECTS + { + alaUdldPortConfigUdldStatus, + alaUdldPortConfigUdldMode, + alaUdldPortConfigUdldProbeIntervalTimer, + alaUdldPortConfigUdldDetectionPeriodTimer, + alaUdldPortConfigUdldOperationalStatus + } + STATUS current + DESCRIPTION + "Collection of objects for management of UDLD Port Configuration Table." + ::= { alcatelIND1UDLDMIBGroups 2 } + +udldPortStatsGroup OBJECT-GROUP + OBJECTS + { + alaUdldNumUDLDNeighbors, + alaUdldPortStatsClear, + alaUdldPortNumProbeSent, + alaUdldPortNumEchoSent, + alaUdldPortNumInvalidRcvd, + alaUdldPortNumFlushRcvd + } + STATUS current + DESCRIPTION + "Collection of objects for management of UDLD Port Statistics Table." + ::= { alcatelIND1UDLDMIBGroups 3 } + +udldPortNeighborStatsGroup OBJECT-GROUP + OBJECTS + { + alaUdldNeighborName, + alaUdldNumHelloRcvd, + alaUdldNumEchoRcvd + } + STATUS current + DESCRIPTION + "Collection of objects for management of UDLD Port Neighbor Statistics Table." + ::= { alcatelIND1UDLDMIBGroups 4 } + +udldPortTrapGroup NOTIFICATION-GROUP + NOTIFICATIONS + { + udldStateChange + } + STATUS current + DESCRIPTION + "Collection of objects for UDLD Traps." + ::= { alcatelIND1UDLDMIBGroups 5 } + +-- ------------------------------------------------------------- + +-- ------------------------------------------------------------- +-- COMPLIANCE +-- ------------------------------------------------------------- +alcatelIND1UDLDMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for UDLD." + MODULE + MANDATORY-GROUPS + { + udldPortBaseGroup, + udldPortConfigGroup, + udldPortStatsGroup, + udldPortNeighborStatsGroup, + udldPortTrapGroup + } + ::= { alcatelIND1UDLDMIBCompliances 1 } + +-- ------------------------------------------------------------- +END |