diff options
Diffstat (limited to 'MIBS/nokia/RS-232-MIB')
| -rw-r--r-- | MIBS/nokia/RS-232-MIB | 791 |
1 files changed, 791 insertions, 0 deletions
diff --git a/MIBS/nokia/RS-232-MIB b/MIBS/nokia/RS-232-MIB new file mode 100644 index 0000000..0c0c7d7 --- /dev/null +++ b/MIBS/nokia/RS-232-MIB @@ -0,0 +1,791 @@ +RS-232-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, transmission, + Counter32, Integer32 + FROM SNMPv2-SMI + InterfaceIndex + FROM IF-MIB + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF; + + +rs232 MODULE-IDENTITY + LAST-UPDATED "9405261700Z" + ORGANIZATION "IETF Character MIB Working Group" + CONTACT-INFO + " Bob Stewart + Postal: Xyplex, Inc. + 295 Foster Street + Littleton, MA 01460 + + Tel: 508-952-4816 + Fax: 508-952-4887 + E-mail: rlstewart@eng.xyplex.com" + DESCRIPTION + "The MIB module for RS-232-like hardware devices." + ::= { transmission 33 } + + +-- Generic RS-232-like information + +rs232Number OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ports (regardless of their current + state) in the RS-232-like general port table." + ::= { rs232 1 } + + +-- RS-232-like General Port Table + +rs232PortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Rs232PortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of port entries. The number of entries is + given by the value of rs232Number." + ::= { rs232 2 } + +rs232PortEntry OBJECT-TYPE + SYNTAX Rs232PortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Status and parameter values for a port." + INDEX { rs232PortIndex } + ::= { rs232PortTable 1 } + +Rs232PortEntry ::= + SEQUENCE { + rs232PortIndex + InterfaceIndex, + rs232PortType + INTEGER, + rs232PortInSigNumber + Integer32, + rs232PortOutSigNumber + Integer32, + rs232PortInSpeed + Integer32, + rs232PortOutSpeed + Integer32, + rs232PortInFlowType + INTEGER, + rs232PortOutFlowType + INTEGER + } + +rs232PortIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of ifIndex for the port. By convention + and if possible, hardware port numbers map directly + to external connectors. The value for each port must + remain constant at least from one re-initialization + of the network management agent to the next." + ::= { rs232PortEntry 1 } + +rs232PortType OBJECT-TYPE + SYNTAX INTEGER { other(1), rs232(2), rs422(3), + rs423(4), v35(5), x21(6) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port's hardware type." + ::= { rs232PortEntry 2 } + +rs232PortInSigNumber OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input signals for the port in the + input signal table (rs232PortInSigTable). The table + contains entries only for those signals the software + can detect and that are useful to observe." + ::= { rs232PortEntry 3 } + +rs232PortOutSigNumber OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of output signals for the port in the + output signal table (rs232PortOutSigTable). The + table contains entries only for those signals the + software can assert and that are useful to observe." + ::= { rs232PortEntry 4 } + +rs232PortInSpeed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port's input speed in bits per second. Note that + non-standard values, such as 9612, are probably not allowed + on most implementations." + ::= { rs232PortEntry 5 } + +rs232PortOutSpeed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port's output speed in bits per second. Note that + non-standard values, such as 9612, are probably not allowed + on most implementations." + ::= { rs232PortEntry 6 } + +rs232PortInFlowType OBJECT-TYPE + SYNTAX INTEGER { none(1), ctsRts(2), dsrDtr(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port's type of input flow control. 'none' + indicates no flow control at this level. + 'ctsRts' and 'dsrDtr' indicate use of the indicated + hardware signals." + ::= { rs232PortEntry 7 } + +rs232PortOutFlowType OBJECT-TYPE + SYNTAX INTEGER { none(1), ctsRts(2), dsrDtr(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port's type of output flow control. 'none' + indicates no flow control at this level. + 'ctsRts' and 'dsrDtr' indicate use of the indicated + hardware signals." + ::= { rs232PortEntry 8 } + + +-- RS-232-like Asynchronous Port Table + +rs232AsyncPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Rs232AsyncPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of asynchronous port entries. Entries need + not exist for synchronous ports." + ::= { rs232 3 } + +rs232AsyncPortEntry OBJECT-TYPE + SYNTAX Rs232AsyncPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Status and parameter values for an asynchronous + port." + INDEX { rs232AsyncPortIndex } + ::= { rs232AsyncPortTable 1 } + +Rs232AsyncPortEntry ::= + SEQUENCE { + rs232AsyncPortIndex + InterfaceIndex, + rs232AsyncPortBits + INTEGER, + rs232AsyncPortStopBits + INTEGER, + rs232AsyncPortParity + INTEGER, + rs232AsyncPortAutobaud + INTEGER, + rs232AsyncPortParityErrs + Counter32, + rs232AsyncPortFramingErrs + Counter32, + rs232AsyncPortOverrunErrs + Counter32 + + } + +rs232AsyncPortIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each port. Its value is the + same as rs232PortIndex for the port." + ::= { rs232AsyncPortEntry 1 } + +rs232AsyncPortBits OBJECT-TYPE + SYNTAX INTEGER (5..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port's number of bits in a character." + ::= { rs232AsyncPortEntry 2 } + +rs232AsyncPortStopBits OBJECT-TYPE + SYNTAX INTEGER { one(1), two(2), + oneAndHalf(3), dynamic(4) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port's number of stop bits." + ::= { rs232AsyncPortEntry 3 } + +rs232AsyncPortParity OBJECT-TYPE + SYNTAX INTEGER { none(1), odd(2), even(3), + mark(4), space(5) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port's sense of a character parity bit." + ::= { rs232AsyncPortEntry 4 } + +rs232AsyncPortAutobaud OBJECT-TYPE + SYNTAX INTEGER { enabled(1), disabled(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A control for the port's ability to automatically + sense input speed. + + When rs232PortAutoBaud is 'enabled', a port may + autobaud to values different from the set values for + speed, parity, and character size. As a result a + network management system may temporarily observe + values different from what was previously set." + ::= { rs232AsyncPortEntry 5 } + +rs232AsyncPortParityErrs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of characters with a parity error, + input from the port since system re-initialization + and while the port state was 'up' or 'test'." + ::= { rs232AsyncPortEntry 6 } + +rs232AsyncPortFramingErrs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of characters with a framing error, + input from the port since system re-initialization + and while the port state was 'up' or 'test'." + ::= { rs232AsyncPortEntry 7 } + +rs232AsyncPortOverrunErrs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of characters with an overrun error, + input from the port since system re-initialization + and while the port state was 'up' or 'test'." + ::= { rs232AsyncPortEntry 8 } + + +-- RS-232-like Synchronous Port Table + +rs232SyncPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Rs232SyncPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of asynchronous port entries. Entries need + not exist for synchronous ports." + ::= { rs232 4 } + +rs232SyncPortEntry OBJECT-TYPE + SYNTAX Rs232SyncPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Status and parameter values for a synchronous + port." + INDEX { rs232SyncPortIndex } + ::= { rs232SyncPortTable 1 } + +Rs232SyncPortEntry ::= + SEQUENCE { + rs232SyncPortIndex + InterfaceIndex, + rs232SyncPortClockSource + INTEGER, + rs232SyncPortFrameCheckErrs + Counter32, + rs232SyncPortTransmitUnderrunErrs + Counter32, + rs232SyncPortReceiveOverrunErrs + Counter32, + rs232SyncPortInterruptedFrames + Counter32, + rs232SyncPortAbortedFrames + Counter32, + rs232SyncPortRole + INTEGER, + rs232SyncPortEncoding + INTEGER, + rs232SyncPortRTSControl + INTEGER, + rs232SyncPortRTSCTSDelay + Integer32, + rs232SyncPortMode + INTEGER, + rs232SyncPortIdlePattern + INTEGER, + rs232SyncPortMinFlags + Integer32 + } + +rs232SyncPortIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each port. Its value is the + same as rs232PortIndex for the port." + ::= { rs232SyncPortEntry 1 } + +rs232SyncPortClockSource OBJECT-TYPE + SYNTAX INTEGER { internal(1), external(2), split(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Source of the port's bit rate clock. 'split' means + the tranmit clock is internal and the receive clock + is external." + ::= { rs232SyncPortEntry 2 } + +rs232SyncPortFrameCheckErrs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of frames with an invalid frame check + sequence, input from the port since system + re-initialization and while the port state was 'up' + or 'test'." + ::= { rs232SyncPortEntry 3 } + +rs232SyncPortTransmitUnderrunErrs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of frames that failed to be + transmitted on the port since system + re-initialization and while the port state was 'up' + or 'test' because data was not available to the + transmitter in time." + ::= { rs232SyncPortEntry 4 } + +rs232SyncPortReceiveOverrunErrs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of frames that failed to be received + on the port since system re-initialization and while + the port state was 'up' or 'test' because the + receiver did not accept the data in time." + ::= { rs232SyncPortEntry 5 } + +rs232SyncPortInterruptedFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of frames that failed to be received + or transmitted on the port due to loss of modem + signals since system re-initialization and while the + port state was 'up' or 'test'." + ::= { rs232SyncPortEntry 6 } + +rs232SyncPortAbortedFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of frames aborted on the port due to + receiving an abort sequence since system + re-initialization and while the port state was 'up' + or 'test'." + ::= { rs232SyncPortEntry 7 } + +rs232SyncPortRole OBJECT-TYPE + SYNTAX INTEGER { dte(1), dce(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The role the device is playing that is using this port. + dte means the device is performing the role of + data terminal equipment + dce means the device is performing the role of + data circuit-terminating equipment." + DEFVAL { dce } + ::= { rs232SyncPortEntry 8 } + +rs232SyncPortEncoding OBJECT-TYPE + SYNTAX INTEGER { nrz(1), nrzi(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The bit stream encoding technique that is in effect + for this port. + nrz for Non-Return to Zero encoding + nrzi for Non-Return to Zero Inverted encoding." + DEFVAL { nrz } + ::= { rs232SyncPortEntry 9 } + +rs232SyncPortRTSControl OBJECT-TYPE + SYNTAX INTEGER { controlled(1), constant(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The method used to control the Request To Send (RTS) + signal. + + controlled when the DTE is asserts RTS each time + data needs to be transmitted and drops + RTS at some point after data + transmission begins. + + If rs232SyncPortRole is 'dte', the + RTS is an output signal. The device + will issue a RTS and wait for a CTS + from the DCE before starting to + transmit. + + If rs232SyncPortRole is 'dce', the + RTS is an input signal. The device + will issue a CTS only after having + received RTS and waiting the + rs232SyncPortRTSCTSDelay interval. + + constant when the DTE constantly asserts RTS." + DEFVAL { constant } + ::= { rs232SyncPortEntry 10 } + +rs232SyncPortRTSCTSDelay OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The interval (in milliseconds) that the DCE must wait + after it sees RTS asserted before asserting CTS. This + object exists in support of older synchronous devices + that cannot recognize CTS within a certain interval + after it asserts RTS." + DEFVAL { 0 } + ::= { rs232SyncPortEntry 11 } + +rs232SyncPortMode OBJECT-TYPE + SYNTAX INTEGER { fdx(1), hdx(2), simplex-receive(3), + simplex-send(4) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mode of operation of the port with respect to the + direction and simultaneity of data transfer. + + fdx when frames on the data link can be + transmitted and received at the same + time + + hdx when frames can either be received + from the data link or transmitted + onto the data link but not at the + same time. + + simplex-receive when frames can only be received on + this data link. + + simplex-send when frames can only be sent on this + data link." + DEFVAL { fdx } + ::= { rs232SyncPortEntry 12 } + +rs232SyncPortIdlePattern OBJECT-TYPE + SYNTAX INTEGER { mark(1), space(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The bit pattern used to indicate an idle line." + DEFVAL { space } + ::= { rs232SyncPortEntry 13 } + +rs232SyncPortMinFlags OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum number of flag patterns this port needs in + order to recognize the end of one frame and the start + of the next. Plausible values are 1 and 2." + DEFVAL { 2 } + ::= { rs232SyncPortEntry 14 } + + +-- Input Signal Table + +rs232InSigTable OBJECT-TYPE + SYNTAX SEQUENCE OF Rs232InSigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of port input control signal entries + implemented and visible to the software on the port, + and useful to monitor." + ::= { rs232 5 } + +rs232InSigEntry OBJECT-TYPE + SYNTAX Rs232InSigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Input control signal status for a hardware port." + INDEX { rs232InSigPortIndex, rs232InSigName } + ::= { rs232InSigTable 1 } + +Rs232InSigEntry ::= + SEQUENCE { + rs232InSigPortIndex + InterfaceIndex, + rs232InSigName + INTEGER, + rs232InSigState + INTEGER, + rs232InSigChanges + Counter32 + } + +rs232InSigPortIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of rs232PortIndex for the port to which + this entry belongs." + ::= { rs232InSigEntry 1 } + +rs232InSigName OBJECT-TYPE + SYNTAX INTEGER { rts(1), cts(2), dsr(3), dtr(4), ri(5), + dcd(6), sq(7), srs(8), srts(9), + scts(10), sdcd(11) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Identification of a hardware signal, as follows: + + rts Request to Send + cts Clear to Send + dsr Data Set Ready + dtr Data Terminal Ready + ri Ring Indicator + dcd Received Line Signal Detector + sq Signal Quality Detector + srs Data Signaling Rate Selector + srts Secondary Request to Send + scts Secondary Clear to Send + sdcd Secondary Received Line Signal Detector + " + REFERENCE + "EIA Standard RS-232-C, August 1969." + ::= { rs232InSigEntry 2 } + +rs232InSigState OBJECT-TYPE + SYNTAX INTEGER { none(1), on(2), off(3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current signal state." + ::= { rs232InSigEntry 3 } + +rs232InSigChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the signal has changed from + 'on' to 'off' or from 'off' to 'on'." + ::= { rs232InSigEntry 4 } + + +-- Output Signal Table + +rs232OutSigTable OBJECT-TYPE + SYNTAX SEQUENCE OF Rs232OutSigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of port output control signal entries + implemented and visible to the software on the port, + and useful to monitor." + ::= { rs232 6 } + +rs232OutSigEntry OBJECT-TYPE + SYNTAX Rs232OutSigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Output control signal status for a hardware port." + INDEX { rs232OutSigPortIndex, rs232OutSigName } + ::= { rs232OutSigTable 1 } + +Rs232OutSigEntry ::= + SEQUENCE { + rs232OutSigPortIndex + InterfaceIndex, + rs232OutSigName + INTEGER, + rs232OutSigState + INTEGER, + rs232OutSigChanges + Counter32 + } + +rs232OutSigPortIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of rs232PortIndex for the port to which + this entry belongs." + ::= { rs232OutSigEntry 1 } + +rs232OutSigName OBJECT-TYPE + SYNTAX INTEGER { rts(1), cts(2), dsr(3), dtr(4), ri(5), + dcd(6), sq(7), srs(8), srts(9), + scts(10), sdcd(11) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Identification of a hardware signal, as follows: + + rts Request to Send + cts Clear to Send + dsr Data Set Ready + dtr Data Terminal Ready + ri Ring Indicator + dcd Received Line Signal Detector + sq Signal Quality Detector + srs Data Signaling Rate Selector + srts Secondary Request to Send + scts Secondary Clear to Send + sdcd Secondary Received Line Signal Detector + " + REFERENCE + "EIA Standard RS-232-C, August 1969." + ::= { rs232OutSigEntry 2 } + +rs232OutSigState OBJECT-TYPE + SYNTAX INTEGER { none(1), on(2), off(3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current signal state." + ::= { rs232OutSigEntry 3 } + +rs232OutSigChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the signal has changed from + 'on' to 'off' or from 'off' to 'on'." + ::= { rs232OutSigEntry 4 } + + +-- conformance information + +rs232Conformance OBJECT IDENTIFIER ::= { rs232 7 } + +rs232Groups OBJECT IDENTIFIER ::= { rs232Conformance 1 } +rs232Compliances OBJECT IDENTIFIER ::= { rs232Conformance 2 } + + +-- compliance statements + +rs232Compliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMPv2 entities + which have RS-232-like hardware interfaces." + + MODULE -- this module + MANDATORY-GROUPS { rs232Group } + + GROUP rs232AsyncGroup + DESCRIPTION + "The Asynch group is mandatory only for those + SNMPv2 entities which have asynchronous + interfaces Rs-232-like." + + GROUP rs232SyncGroup + DESCRIPTION + "The Synch group is mandatory only for those + SNMPv2 entities which have synchronous + interfaces Rs-232-like." + ::= { rs232Compliances 1 } + +-- units of conformance + +rs232Group OBJECT-GROUP + OBJECTS { rs232Number, rs232PortIndex, rs232PortType, + rs232PortInSigNumber, rs232PortOutSigNumber, + rs232PortInSpeed, rs232PortOutSpeed, + rs232PortInFlowType, rs232PortOutFlowType, + rs232InSigPortIndex, rs232InSigName, + rs232InSigState, rs232InSigChanges, + rs232OutSigPortIndex, rs232OutSigName, + rs232OutSigState, rs232OutSigChanges } + STATUS current + DESCRIPTION + "A collection of objects providing information + applicable to all RS-232-like interfaces." + ::= { rs232Groups 1 } + +rs232AsyncGroup OBJECT-GROUP + OBJECTS { rs232AsyncPortIndex, rs232AsyncPortBits, + rs232AsyncPortStopBits, rs232AsyncPortParity, + rs232AsyncPortAutobaud, rs232AsyncPortParityErrs, + rs232AsyncPortFramingErrs, rs232AsyncPortOverrunErrs } + STATUS current + DESCRIPTION + "A collection of objects providing information + applicable to asynchronous RS-232-like interfaces." + ::= { rs232Groups 2 } + +rs232SyncGroup OBJECT-GROUP + OBJECTS { rs232SyncPortIndex, rs232SyncPortClockSource, + rs232SyncPortFrameCheckErrs, + rs232SyncPortTransmitUnderrunErrs, + rs232SyncPortReceiveOverrunErrs, + rs232SyncPortInterruptedFrames, + rs232SyncPortAbortedFrames } + STATUS current + DESCRIPTION + "A collection of objects providing information + applicable to synchronous RS-232-like interfaces." + ::= { rs232Groups 3 } + +rs232SyncSDLCGroup OBJECT-GROUP + OBJECTS { rs232SyncPortRole, + rs232SyncPortEncoding, + rs232SyncPortRTSControl, + rs232SyncPortRTSCTSDelay, + rs232SyncPortMode, + rs232SyncPortIdlePattern, + rs232SyncPortMinFlags } + STATUS current + DESCRIPTION + "A collection of objects providing information + applicable to synchronous RS-232-like interfaces + running SDLC." + ::= { rs232Groups 4 } + +END |