summaryrefslogtreecommitdiff
path: root/MIBS/nokia/aos7/ALCATEL-IND1-AUTO-FABRIC-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-AUTO-FABRIC-MIB')
-rw-r--r--MIBS/nokia/aos7/ALCATEL-IND1-AUTO-FABRIC-MIB579
1 files changed, 579 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-AUTO-FABRIC-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-AUTO-FABRIC-MIB
new file mode 100644
index 0000000..cddd32c
--- /dev/null
+++ b/MIBS/nokia/aos7/ALCATEL-IND1-AUTO-FABRIC-MIB
@@ -0,0 +1,579 @@
+ALCATEL-IND1-AUTO-FABRIC-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY,
+ NOTIFICATION-TYPE, OBJECT-TYPE
+ FROM SNMPv2-SMI
+ InterfaceIndex FROM IF-MIB
+ MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ SnmpAdminString FROM SNMP-FRAMEWORK-MIB
+ softentIND1AutoFabric FROM ALCATEL-IND1-BASE;
+
+
+ alcatelIND1AUTOFABRICMIB MODULE-IDENTITY
+ LAST-UPDATED "201211260000Z"
+ ORGANIZATION "Alcatel - Architects Of An Internet World"
+ CONTACT-INFO
+ "Please consult with Customer Service to insure the most appropriate
+ version of this document is used with the products in question:
+
+ Alcatel Internetworking, Incorporated
+ (Division 1, Formerly XYLAN Corporation)
+ 26801 West Agoura Road
+ Agoura Hills, CA 91301-5122
+ United States Of America
+
+ Telephone: North America +1 800 995 2696
+ Latin America +1 877 919 9526
+ Europe +31 23 556 0100
+ Asia +65 394 7933
+ All Other +1 818 878 4507
+
+ Electronic Mail: support@ind.alcatel.com
+ World Wide Web: http://www.ind.alcatel.com
+ File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
+
+ DESCRIPTION
+ "This module describes an authoritative enterprise-specific Simple
+ Network Management Protocol (SNMP) Management Information Base (MIB):
+
+ For the Birds Of Prey Product Line
+ AUTOFABRIC for automatic detection and configuration of LACP, SPB and MVRP.
+
+
+ The right to make changes in specification and other information
+ contained in this document without prior notice is reserved.
+
+ No liability shall be assumed for any incidental, indirect, special, or
+ consequential damages whatsoever arising from or related to this
+ document or the information contained herein.
+
+ Vendors, end-users, and other interested parties are granted
+ non-exclusive license to use this specification in connection with
+ management of the products for which it is intended to be used.
+
+ Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
+ ALL RIGHTS RESERVED WORLDWIDE"
+
+ REVISION "201211250000Z"
+ DESCRIPTION
+ "The AUTOFABRIC MIB defines a set of AUTOFABRIC related management objects for ports
+ that support Autofabric feature. AUTOFABRIC as a
+ feature provides mechanisms to automatically detect and configure LACP aggregates, SPB adjacencies
+ and enables MVRP for automatically learning VLANs advertised by other switches
+
+ This MIB comprises proprietary managed objects as well the objects required
+ for conforming to the feature."
+ ::= { softentIND1AutoFabric 1}
+
+-- --------------------------------------------------------------
+
+alcatelIND1AUTOFABRICMIBNotifications OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIB 0 }
+
+ alcatelIND1AUTOFABRICMIBObjects OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch For AUTO-FABRIC
+ Subsystem Managed Objects."
+ ::= { alcatelIND1AUTOFABRICMIB 1 }
+
+ alcatelIND1AUTOFABRICMIBConformance OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch for AUTOFABRIC Module MIB Subsystem Conformance Information."
+ ::= { alcatelIND1AUTOFABRICMIB 2 }
+
+ alcatelIND1AUTOFABRICMIBGroups OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch for AUTOFABRIC Module MIB Subsystem Units of Conformance."
+ ::= { alcatelIND1AUTOFABRICMIBConformance 1 }
+
+ alcatelIND1AUTOFABRICMIBCompliances OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch for AUTOFABRIC Module MIB Subsystem Compliance Statements."
+ ::= { alcatelIND1AUTOFABRICMIBConformance 2 }
+
+-- --------------------------------------------------------------
+
+-- --------------------------------------------------------------
+-- AUTO-FABRIC MIB
+-- --------------------------------------------------------------
+
+ alaAutoFabricGlobalStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or diable Autofabric on the switch.
+ The value enable (1) indicates that Autofabric should be enabled on
+ the switch. The value disable (2) is used to disable Autofabric on
+ the switch. By default, Autofabric is enabled on the switch."
+ DEFVAL { enable }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 1 }
+
+ alaAutoFabricGlobalDiscovery OBJECT-TYPE
+ SYNTAX INTEGER {
+ default(1),
+ restart(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the global discovery window control for Autofabric.
+ The value restart (2) indicates that Autofabric should restart
+ global discovery window.
+ By default, this object contains a zero value."
+ DEFVAL { default }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 2 }
+
+
+ alaAutoFabricGlobalLACPProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or diable AutoFabric LACP discovery.
+ on the switch. The value enable (1) indicates that during discovery
+ the switch will attempt to create LACP link aggregates. The value
+ disable (2) indicates that there would be no attempt to create LACP
+ link aggregates during the discovery phase. By default LACP is enabled
+ on the switch"
+ DEFVAL { enable }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 3 }
+
+
+ alaAutoFabricGlobalSPBProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or diable AutoFabric SPB discovery.
+ on the switch. The value enable (1) indicates that during discovery
+ the switch will attempt to create SPB adjacencies. The value
+ disable (2) indicates that there would be no attempt to create SPB
+ adjacencies during the discovery phase. By default SPB is enabled
+ on the switch"
+ DEFVAL { enable }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 4 }
+
+
+ alaAutoFabricGlobalMVRPProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or diable AutoFabric MVRP discovery.
+ on the switch. The value enable (1) indicates that during discovery
+ the switch will enable MVRP and attempt to propagate and learn VLANs.
+ The value disable (2) indicates that MVRP would not be enabled in
+ discovery phase. By default MVRP is enabled on the switch"
+ DEFVAL { enable }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 5 }
+
+
+ alaAutoFabricGlobalConfigSaveTimer OBJECT-TYPE
+ SYNTAX Unsigned32 ( 60 .. 3600 )
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Maximum period of time after which configuration built up by AutoFabric
+ would get written to the boot.cfg or vcboot.cfg.
+ The range supported is 60-3600 seconds."
+ DEFVAL { 300 }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 6 }
+
+
+ alaAutoFabricGlobalConfigSaveTimerStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or diable AutoFabric config save
+ timer on the switch. The value enable (1) indicates that
+ after the expiry of the config save timer, all AutoFabric
+ configurations would get written to the boot.cfg ot the vcboot.cfg
+ The value disable (2) would disable the config save timer.
+ By default it is enabled"
+ DEFVAL { enable }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 7 }
+
+ alaAutoFabricGlobalDiscoveryTimer OBJECT-TYPE
+ SYNTAX Unsigned32 ( 0 .. 3600 )
+ UNITS "Minutes"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to specify auto-fabric auto
+ discovery interval, zero disables it, configurable
+ Value is from 2 to 3600 minutes."
+ DEFVAL { 0 }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 8 }
+
+ alaAutoFabricRemoveGlobalConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ default(1),
+ removeGlobalConfig(2)
+ }
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This variable is used to remove the auto fabric global configuration when the user chooses to disable auto fabric"
+ DEFVAL { default }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 10 }
+
+ alaAutoFabricGlobalOSPFv2ProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or disable auto configuration on the
+ OSPFv2 IP Protocol on the switch. "
+ DEFVAL { enable }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 11 }
+
+ alaAutoFabricGlobalOSPFv3ProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or disable auto configuration on the
+ OSPFv3 IP Protocol on the switch. "
+ DEFVAL { enable }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 12 }
+
+ alaAutoFabricGlobalISISProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or disable auto configuration on the
+ ISIS IP Protocol on the switch. "
+ DEFVAL { enable }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 13 }
+
+ alaAutoFabricSPBDefaultProfile OBJECT-TYPE
+ SYNTAX INTEGER {
+ singleService(1),
+ autoVlan(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the default SAP profile used in the Omni switch.
+
+ singleService: defines single service SAP profiles.
+ autoVlan: AOS will generate SAP bindings for VLANS concerned automatically"
+ DEFVAL { autoVlan }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 14 }
+
+ alaAutoFabricLBDProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or disable AutoFabric LBD on SAP port
+ on the switch. The value enable (1) indicates that during discovery
+ the switch will enable Loopback detection on UNP SAP port.
+ The value disable (2) indicates that Loobback detection will not be enabled
+ on UNP SAP port discovery"
+ DEFVAL { enable }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 15 }
+
+ alaAutoFabricRemoveVCReload OBJECT-TYPE
+ SYNTAX INTEGER {
+ default(1),
+ removeVCReload(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is applicable only for Standalone configuration.
+ It reloads the unit as a Standalone when the user chooses to disable auto fabric."
+ DEFVAL { default }
+ ::= { alcatelIND1AUTOFABRICMIBObjects 17 }
+
+-- -------------------------------------------------------------
+-- AUTO-FABRIC Port Config Table
+-- -------------------------------------------------------------
+
+-- DESCRIPTION:
+-- "Port configuration information
+-- data for the AUTO-FABRIC Module.
+-- Implementation of this group is mandantory"
+
+
+ alaAutoFabricPortConfig OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIBObjects 9 }
+
+
+ alaAutoFabricPortConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaAutoFabricPortConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing Autofabric port configuration information."
+ ::= { alaAutoFabricPortConfig 1 }
+
+ alaAutoFabricPortConfigEntry OBJECT-TYPE
+ SYNTAX AlaAutoFabricPortConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An AutoFabric port configuration entry."
+ INDEX { alaAutoFabricPortConfigIfIndex }
+ ::= { alaAutoFabricPortConfigTable 1 }
+
+ AlaAutoFabricPortConfigEntry ::= SEQUENCE {
+ alaAutoFabricPortConfigIfIndex InterfaceIndex,
+ alaAutoFabricPortConfigStatus INTEGER,
+ alaAutoFabricPortLACPProtocolStatus INTEGER,
+ alaAutoFabricPortSPBProtocolStatus INTEGER,
+ alaAutoFabricPortMVRPProtocolStatus INTEGER,
+ alaAutoFabricPortStatus INTEGER,
+ alaAutoFabricPortSPBDefaultProfile INTEGER
+ }
+
+ alaAutoFabricPortConfigIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ifindex of the port on which AutoFabric is running"
+ ::= { alaAutoFabricPortConfigEntry 1 }
+
+ alaAutoFabricPortConfigStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable or diable AutoFabric on the interface.
+ The value enable (1) indicates that AutoFabric should be enabled on
+ the interface. The value disable (2) is used to disable AutoFabric on
+ the interface. By default, AutoFabric is enabled on the interface."
+ DEFVAL { enable }
+ ::= { alaAutoFabricPortConfigEntry 2 }
+
+
+ alaAutoFabricPortLACPProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable LACP in the AutoFabric discovery
+ on this port. The value enable (1) indicates during discovery window
+ this port will attempt to form LACP link aggregates. The value disable (2)
+ indicates this port will not participate in LACP discovery phase.
+ By default it is enabled"
+ DEFVAL { enable }
+ ::= { alaAutoFabricPortConfigEntry 3 }
+
+ alaAutoFabricPortSPBProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable SPB in the AutoFabric discovery
+ on this port. The value enable (1) indicates during discovery window
+ this port will attempt to form SPB adjacencies. The value disable (2)
+ indicates this port will not participate in SPB discovery phase.
+ By default it is enabled"
+ DEFVAL { enable }
+ ::= { alaAutoFabricPortConfigEntry 4 }
+
+
+ alaAutoFabricPortMVRPProtocolStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable is used to enable MVRP in the AutoFabric discovery
+ on this port. The value enable (1) indicates during discovery window
+ this port will enable MVRP and attempt to learn and propagate VLANs.
+ The value disable (2) indicates this port will not participate in MVRP
+ discovery phase.
+ By default it is enabled"
+ DEFVAL { enable }
+ ::= { alaAutoFabricPortConfigEntry 5 }
+
+
+ alaAutoFabricPortStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled (1),
+ pending (2),
+ complete (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The state of the Autofabric discovery window on the port."
+ ::= { alaAutoFabricPortConfigEntry 6 }
+
+ alaAutoFabricPortSPBDefaultProfile OBJECT-TYPE
+ SYNTAX INTEGER {
+ singleService(1),
+ autoVlan(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the default SAP profile used on a particular port in the switch.
+
+ singleService: defines single service SAP profiles.
+ autoVlan: AOS will generate SAP bindings for VLANS concerned automatically."
+ DEFVAL { autoVlan }
+ ::= { alaAutoFabricPortConfigEntry 7 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaAutoFabricTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIBObjects 16 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaAutoFabricSTPMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ flatMode(1),
+ perVlan(2)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Indicates the change in STP Mode, to Flat or 1X1, due to the change in Auto-Fabric admin-status."
+ ::= { alaAutoFabricTrapsObj 1 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+-- Trap Description
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaAutoFabricSTPModeChangeAlert NOTIFICATION-TYPE
+ OBJECTS {
+ alaAutoFabricSTPMode
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when auto-fabric changes STP mode."
+ ::= { alcatelIND1AUTOFABRICMIBNotifications 1 }
+
+-- -------------------------------------------------------------
+-- COMPLIANCE
+-- -------------------------------------------------------------
+alcatelIND1AUTOFABRICMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "Compliance statement for AUTOFABRIC."
+ MODULE
+ MANDATORY-GROUPS
+ {
+ alaAutoFabricBaseGroup,
+ alaAutoFabricPortConfigGroup,
+ alaAutoFabricNotificationGroup,
+ alaAutoFabricTrapsObjGroup
+ }
+ ::= { alcatelIND1AUTOFABRICMIBCompliances 1 }
+
+-- -------------------------------------------------------------
+-- UNITS OF CONFORMANCE
+-- -------------------------------------------------------------
+
+alaAutoFabricBaseGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaAutoFabricGlobalStatus,
+ alaAutoFabricGlobalDiscovery,
+ alaAutoFabricGlobalLACPProtocolStatus,
+ alaAutoFabricGlobalSPBProtocolStatus,
+ alaAutoFabricGlobalMVRPProtocolStatus,
+ alaAutoFabricGlobalConfigSaveTimer,
+ alaAutoFabricGlobalConfigSaveTimerStatus,
+ alaAutoFabricGlobalDiscoveryTimer,
+ alaAutoFabricRemoveGlobalConfig,
+ alaAutoFabricGlobalOSPFv2ProtocolStatus,
+ alaAutoFabricGlobalOSPFv3ProtocolStatus,
+ alaAutoFabricGlobalISISProtocolStatus,
+ alaAutoFabricSPBDefaultProfile,
+ alaAutoFabricLBDProtocolStatus,
+ alaAutoFabricRemoveVCReload
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of AutoFabric Base Group."
+ ::= { alcatelIND1AUTOFABRICMIBGroups 1 }
+
+alaAutoFabricPortConfigGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaAutoFabricPortConfigStatus,
+ alaAutoFabricPortLACPProtocolStatus,
+ alaAutoFabricPortSPBProtocolStatus,
+ alaAutoFabricPortMVRPProtocolStatus,
+ alaAutoFabricPortStatus,
+ alaAutoFabricPortSPBDefaultProfile
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of AutoFabric Port Configuration Table."
+ ::= { alcatelIND1AUTOFABRICMIBGroups 2 }
+
+alaAutoFabricNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ alaAutoFabricSTPModeChangeAlert
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of notifications for Auto-Fabric."
+ ::= { alcatelIND1AUTOFABRICMIBGroups 3 }
+
+alaAutoFabricTrapsObjGroup OBJECT-GROUP
+ OBJECTS {
+ alaAutoFabricSTPMode
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of notificating objects for Auto-Fabric."
+ ::= { alcatelIND1AUTOFABRICMIBGroups 4 }
+
+-- -------------------------------------------------------------
+
+END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 16:49:21 +0000