diff options
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-DVMRP-MIB')
| -rw-r--r-- | MIBS/nokia/aos7/ALCATEL-IND1-DVMRP-MIB | 413 |
1 files changed, 413 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-DVMRP-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-DVMRP-MIB new file mode 100644 index 0000000..15aac70 --- /dev/null +++ b/MIBS/nokia/aos7/ALCATEL-IND1-DVMRP-MIB @@ -0,0 +1,413 @@ +ALCATEL-IND1-DVMRP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32, Unsigned32 + FROM SNMPv2-SMI + TruthValue + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + dvmrpInterfaceEntry + FROM DVMRP-STD-MIB + routingIND1Dvmrp + FROM ALCATEL-IND1-BASE; + +alcatelIND1DVMRPMIB MODULE-IDENTITY + LAST-UPDATED "200704030000Z" + ORGANIZATION "Alcatel-Lucent" + CONTACT-INFO + "Please consult with Customer Service to ensure the most appropriate + version of this document is used with the products in question: + + Alcatel-Lucent, Enterprise Solutions Division + (Formerly Alcatel Internetworking, Incorporated) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + + DESCRIPTION + "This module describes an authoritative enterprise-specific Simple + Network Management Protocol (SNMP) Management Information Base (MIB): + + This MIB contains management information for Coronado Layer + 3 Hardware Routing Engine (HRE) management. + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 1995-2007 Alcatel-Lucent + ALL RIGHTS RESERVED WORLDWIDE" + + REVISION "200704030000Z" + DESCRIPTION + "The latest version of this MIB Module." + + ::= { routingIND1Dvmrp 1 } + +alcatelIND1DVMRPMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1DVMRPMIB 1 } + +alaDvmrpGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1DVMRPMIBObjects 1 } +alaDvmrpTunnelXIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaDvmrpTunnelXIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of attributes that are associated with the internal + assigned tunnel index when a DVMRP tunnel is created. This table + contains additional objects that are not present in the tunnelMIB + tunnelIfTable." + ::= { alcatelIND1DVMRPMIBObjects 2 } + + +-- *************************************************************************** +-- Global DVMRP Configuration +-- *************************************************************************** + +alaDvmrpAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2), + unrestrictedEnable(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables the + DVMRP protocol on this router." + DEFVAL { disable } + ::= { alaDvmrpGlobalConfig 1} + +alaDvmrpRouteReportInterval OBJECT-TYPE + SYNTAX Integer32 (10..2000) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Route Report Interval determines how often + a router will send its complete routing tables to + neighboring routers running DVMRP." + DEFVAL { 60 } + ::= { alaDvmrpGlobalConfig 2} + +alaDvmrpFlashUpdateInterval OBJECT-TYPE + SYNTAX Integer32 (5..86400) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum Flash Update Interval defines how often + routing table change messages are sent to + neighboring DVMRP routers. Since these messages + are sent between the transmission of complete + routing tables, the flash update interval value + must be shorter than that of the route report + interval." + DEFVAL { 5 } + ::= { alaDvmrpGlobalConfig 3} + +alaDvmrpNeighborTimeout OBJECT-TYPE + SYNTAX Integer32 (5..86400) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Neighbor Timeout value specifies how long, without + any activity from a neighboring DVMRP router, the + router will wait before assuming that the inactive + router is down." + DEFVAL { 35 } + ::= { alaDvmrpGlobalConfig 4} + +alaDvmrpRouteExpirationTimeout OBJECT-TYPE + SYNTAX Integer32 (20..4000) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Route Expiration Timeout value specifies how + long the router will wait before aging out a route. + When this value expires, the route is advertised as + inactive until either it's activity resumes or it is + deleted." + DEFVAL { 140 } + ::= { alaDvmrpGlobalConfig 5} + +alaDvmrpRouteHoldDown OBJECT-TYPE + SYNTAX Integer32 (1..86400) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the time during which DVMRP routes are kept + in a hold-down state. A hold-down state refers to + the time that a route to an inactive network continues + to be advertised." + DEFVAL { 120 } + ::= { alaDvmrpGlobalConfig 6} + +alaDvmrpNeighborProbeInterval OBJECT-TYPE + SYNTAX Integer32 (5..30) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Neighbor Probe Interval value specifies how often + probes will be transmitted to those interfaces + with attached DVMRP neighbors." + DEFVAL { 10 } + ::= { alaDvmrpGlobalConfig 7} + +alaDvmrpPruneLifetime OBJECT-TYPE + SYNTAX Integer32 (180..86400) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Prune Lifetime value defines the value + whereby a source-rooted multicast tree will be + pruned." + DEFVAL { 7200 } + ::= { alaDvmrpGlobalConfig 8} + +alaDvmrpPruneRetransmission OBJECT-TYPE + SYNTAX Integer32 (30..86400) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Prune Packet Retransmission value is the duration + of time that the router will wait, if it continues + to receive unwanted multicast traffic, before + retransmitting a prune message." + DEFVAL { 30 } + ::= { alaDvmrpGlobalConfig 9} + +alaDvmrpGraftRetransmission OBJECT-TYPE + SYNTAX Integer32 (5..86400) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Graft message Retransmission value defines + the duration of time that the router will wait + before retransmitting a graft message, if it has + not already received an acknowledgement from its + neighbor." + DEFVAL { 5 } + ::= { alaDvmrpGlobalConfig 10} + +alaDvmrpInitNbrAsSubord OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value true(1) indicates neighbors, on initial discovery, + are considered subordinate. This means traffic may be resumed + slightly quicker on network disruptions. But, if the neighbor + has trouble handling huge initial blasts of traffic, it may be + wise to wait until route reports have been exchanged and the + neighbor has requested dependency, before forwarding traffic." + DEFVAL { true } + ::= { alaDvmrpGlobalConfig 11} + + alaDvmrpBfdStatus OBJECT-TYPE + SYNTAX INTEGER + { + enable(1), + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Enables/Disables Bfd for DVMRP Protocol." + DEFVAL {disable} + ::= { alaDvmrpGlobalConfig 12} + + alaDvmrpBfdAllInterfaceStatus OBJECT-TYPE + SYNTAX INTEGER + { + enable(1), + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Enables/Disables Bfd for all DVMRP interfaces." + DEFVAL {disable} + ::= { alaDvmrpGlobalConfig 13} + + alaDvmrpMbrOperStatus OBJECT-TYPE + SYNTAX INTEGER + { + enable(1), + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Whether MBR is currently enabled/disabled for DVMRP." + ::= { alaDvmrpGlobalConfig 14} + +-- ************************************************************************ +-- DVMRP Tunnel Config Extension Table +-- ************************************************************************ +alaDvmrpTunnelXIfEntry OBJECT-TYPE + SYNTAX AlaDvmrpTunnelXIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing additional attributes associated with a DVMRP + tunnel." + INDEX { alaDvmrpTunnelIndex } + ::= { alaDvmrpTunnelXIfTable 1 } + +AlaDvmrpTunnelXIfEntry ::= + SEQUENCE { + alaDvmrpTunnelIndex Unsigned32, + alaDvmrpLocalIfIndex Unsigned32 + } + +alaDvmrpTunnelIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tunnel index of the DVMRP tunnel." + ::= { alaDvmrpTunnelXIfEntry 1 } + +alaDvmrpLocalIfIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The interface index of the local end-point of the DVMRP tunnel." + + ::= { alaDvmrpTunnelXIfEntry 2 } + + alaDvmrpIfAugTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaDvmrpIfAugEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Expansion for Dvmrp Intf table." + ::= { alcatelIND1DVMRPMIBObjects 4 } + + alaDvmrpIfAugEntry OBJECT-TYPE + SYNTAX AlaDvmrpIfAugEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of alaDvmrpIfAugEntry." + AUGMENTS { dvmrpInterfaceEntry } + ::= { alaDvmrpIfAugTable 1 } + + AlaDvmrpIfAugEntry ::= + SEQUENCE { + alaDvmrpIfBfdStatus INTEGER, + alaDvmrpIfMbrDefaultInfoStatus INTEGER + } + + alaDvmrpIfBfdStatus OBJECT-TYPE + SYNTAX INTEGER + { + enable(1), + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object enables/disables BFD for this DVMRP interface." + ::= { alaDvmrpIfAugEntry 1 } + + alaDvmrpIfMbrDefaultInfoStatus OBJECT-TYPE + SYNTAX INTEGER + { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object enables/disables DVMRP to advertise the default route + on this interface. This object is only applicable if the router + is operating as a Multicast Border Router." + DEFVAL { disable } + ::= { alaDvmrpIfAugEntry 2 } + +-- conformance information + +alcatelIND1DVMRPMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1DVMRPMIB 2 } +alcatelIND1DVMRPMIBCompliances OBJECT IDENTIFIER ::= + { alcatelIND1DVMRPMIBConformance 1 } +alcatelIND1DVMRPMIBGroups OBJECT IDENTIFIER ::= + { alcatelIND1DVMRPMIBConformance 2 } + +-- compliance statements + +alaDvmrpCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for routers running DVMRP + and implementing the ALCATEL-IND1-DVMRP MIB." + MODULE -- this module + MANDATORY-GROUPS { alaDvmrpConfigMIBGroup, + alaDvmrpTunnelXIfMIBGroup,alaDvmrpIfConfigGroup } + + ::= { alcatelIND1DVMRPMIBCompliances 1 } + +-- units of conformance + +alaDvmrpConfigMIBGroup OBJECT-GROUP + OBJECTS { alaDvmrpAdminStatus, alaDvmrpRouteReportInterval, + alaDvmrpFlashUpdateInterval, alaDvmrpNeighborTimeout, + alaDvmrpRouteExpirationTimeout, alaDvmrpRouteHoldDown, + alaDvmrpNeighborProbeInterval, alaDvmrpPruneLifetime, + alaDvmrpPruneRetransmission, alaDvmrpGraftRetransmission, + alaDvmrpInitNbrAsSubord,alaDvmrpBfdStatus,alaDvmrpBfdAllInterfaceStatus, + alaDvmrpMbrOperStatus + } + STATUS current + DESCRIPTION + "A collection of objects to support the management of global + configuration parameters on DVMRP routers." + ::= { alcatelIND1DVMRPMIBGroups 1 } + +alaDvmrpTunnelXIfMIBGroup OBJECT-GROUP + OBJECTS { alaDvmrpLocalIfIndex } + STATUS current + DESCRIPTION + "These objects are required to provide additional information + about configured DVMRP tunnels not found in the standard tunnel + MIB." + ::= { alcatelIND1DVMRPMIBGroups 2 } +alaDvmrpIfConfigGroup OBJECT-GROUP + OBJECTS { alaDvmrpIfBfdStatus, alaDvmrpIfMbrDefaultInfoStatus } + STATUS current + DESCRIPTION + "These objects are required to provide additional information + about configured DVMRP interfaces not found in the standard tunnel + MIB." + ::= { alcatelIND1DVMRPMIBGroups 3 } + + +END + |