diff options
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-OPENFLOW-MIB')
| -rw-r--r-- | MIBS/nokia/aos7/ALCATEL-IND1-OPENFLOW-MIB | 709 |
1 files changed, 709 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-OPENFLOW-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-OPENFLOW-MIB new file mode 100644 index 0000000..2b78905 --- /dev/null +++ b/MIBS/nokia/aos7/ALCATEL-IND1-OPENFLOW-MIB @@ -0,0 +1,709 @@ + ALCATEL-IND1-OPENFLOW-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, + Integer32, Unsigned32, NOTIFICATION-TYPE + FROM SNMPv2-SMI + + RowStatus + FROM SNMPv2-TC + + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + + InetAddressType, InetAddress + FROM INET-ADDRESS-MIB + + SnmpAdminString FROM SNMP-FRAMEWORK-MIB + + softentIND1OpenflowMIB + FROM ALCATEL-IND1-BASE + ; + + + alcatelIND1OpenflowMIB MODULE-IDENTITY + LAST-UPDATED "201403260000Z" + ORGANIZATION "Alcatel-Lucent" + CONTACT-INFO + "Please consult with Customer Service to ensure the most appropriate + version of this document is used with the products in question: + + Alcatel-Lucent, Enterprise Solutions Division + (Formerly Alcatel Internetworking, Incorporated) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + + DESCRIPTION + "This module describes an authoritative enterprise-specific Simple + Network Management Protocol (SNMP) Management Information Base (MIB): + + Openflow for OS6900 Product Line. + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 2013 Alcatel-Lucent + ALL RIGHTS RESERVED WORLDWIDE" + + REVISION "201403260000Z" + DESCRIPTION + "The latest version of this MIB Module." + + REVISION "201410080000Z" + DESCRIPTION + "alaOpenflowLogicalSwitchLearnedMacUpdate is not limited to OS6900 devices" + ::= { softentIND1OpenflowMIB 1 } + + -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + -- Hook into the Alcatel Tree + -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + + alcatelIND1OpenflowMIBNotifications OBJECT IDENTIFIER ::= { alcatelIND1OpenflowMIB 0 } + + alcatelIND1OpenflowMIBObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION + " Alcatel-Lucent Openflow Managed Objects." + ::= { alcatelIND1OpenflowMIB 1 } + + alcatelIND1OpenflowMIBConformance OBJECT-IDENTITY + STATUS current + DESCRIPTION + " Alcatel-Lucent Openflow Conformance Information." + ::= { alcatelIND1OpenflowMIB 2 } + + + alaOpenflowGlobalConfigObjects OBJECT IDENTIFIER ::= { alcatelIND1OpenflowMIBObjects 1 } + + alaOpenflowGlobalBackoffMax OBJECT-TYPE + SYNTAX Integer32 (1..60) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " Alcatel-Lucent Openflow maximum back-off time in seconds for controller connection attempts." + DEFVAL { 60 } + ::= { alaOpenflowGlobalConfigObjects 1 } + + alaOpenflowGlobalIdleProbeTimeout OBJECT-TYPE + SYNTAX Integer32 (0..60) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " Alcatel-Lucent Openflow idle probe timeout value in seconds. If set to 0, idle probing is disabled." + DEFVAL { 15 } + ::= { alaOpenflowGlobalConfigObjects 2 } + + -- Openflow LogicalSwitch Table + + alaOpenflowLogicalSwitchTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaOpenflowLogicalSwitchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains one row for each Logical Switch." + ::= { alcatelIND1OpenflowMIBObjects 2 } + + alaOpenflowLogicalSwitchEntry OBJECT-TYPE + SYNTAX AlaOpenflowLogicalSwitchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about the Openflow Logical Switches. " + INDEX { alaOpenflowLogicalSwitch } + ::= { alaOpenflowLogicalSwitchTable 1 } + + AlaOpenflowLogicalSwitchEntry ::= SEQUENCE + { + alaOpenflowLogicalSwitch SnmpAdminString, + alaOpenflowLogicalSwitchAdminState INTEGER, + alaOpenflowLogicalSwitchMode INTEGER, + alaOpenflowLogicalSwitchVersions BITS, + alaOpenflowLogicalSwitchVlan Integer32, + alaOpenflowLogicalSwitchControllerCount Integer32, + alaOpenflowLogicalSwitchInterfaceCount Integer32, + alaOpenflowLogicalSwitchFlowCount Integer32, + alaOpenflowLogicalSwitchRowStatus RowStatus, + alaOpenflowLogicalSwitchLearnedMacUpdate INTEGER, + alaOpenflowLogicalSwitchProbeTime Integer32, + alaOpenflowLogicalSwitchFailureDetectTime Integer32, + alaOpenflowLogicalSwitchDPID OCTET STRING, + + alaOpenflowLogicalSwitchTableMissAction INTEGER, + alaOpenflowLogicalSwitchTCPBufferSizeTx Unsigned32, + alaOpenflowLogicalSwitchTCPBufferSizeRx Unsigned32 + } + + alaOpenflowLogicalSwitch OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..31)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Openflow Logical Switch Name." + ::= { alaOpenflowLogicalSwitchEntry 1 } + + alaOpenflowLogicalSwitchAdminState OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Logical Switch Admin State. Enable or disable the Logical Switch. + When disabled, all controllers for the Logical Switch will be + operationally disabled and flows added by those controllers will + be removed." + DEFVAL { enabled } + ::= { alaOpenflowLogicalSwitchEntry 2 } + + alaOpenflowLogicalSwitchMode OBJECT-TYPE + SYNTAX INTEGER { + normal(1), + api(2), + pfcChannel(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Openflow Logical Switch Mode. Normal is regular Openflow, + API is for ACL-like flow operation. Only one Logical Switch + can be in api mode at a time. + PFC-Channel mode is to indicate the Logical Switch + is operating in NEC mode. + + This object cannot be modified after the Logical Switch has been created." + DEFVAL { normal } + ::= { alaOpenflowLogicalSwitchEntry 3 } + + alaOpenflowLogicalSwitchVersions OBJECT-TYPE + SYNTAX BITS { + v1dot0 (0), + v1dot3dot1 (1) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Openflow Logical Switch Bitmap of enabled Openflow versions. + At least one version must be enabled." + DEFVAL { { v1dot0, v1dot3dot1 } } + ::= { alaOpenflowLogicalSwitchEntry 4 } + + alaOpenflowLogicalSwitchVlan OBJECT-TYPE + SYNTAX Integer32 (0|2..4093) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Openflow Logical Switch VLAN. The value 0 indicates that no + VLAN has been specified, it is not a valid value to write. + This object is not valid to write when creating/modifying an + entry with alaOpenflowLogicalSwitchMode api(2)" + DEFVAL { 0 } + ::= { alaOpenflowLogicalSwitchEntry 5 } + + alaOpenflowLogicalSwitchControllerCount OBJECT-TYPE + SYNTAX Integer32 (0..3) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of the configured controllers for the Logical Switch." + ::= { alaOpenflowLogicalSwitchEntry 6 } + + alaOpenflowLogicalSwitchInterfaceCount OBJECT-TYPE + SYNTAX Integer32 (0..5000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of the configured interfaces (ports and link aggregations) for the Logical Switch." + ::= { alaOpenflowLogicalSwitchEntry 7 } + + alaOpenflowLogicalSwitchFlowCount OBJECT-TYPE + SYNTAX Integer32 (0..511) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of the flows pushed to the Logical Switch by its controllers." + ::= { alaOpenflowLogicalSwitchEntry 8 } + + alaOpenflowLogicalSwitchRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Deleting a row from this table will also remove associated entries from other tables in this mib + that have a logical switch as part of their index." + ::= { alaOpenflowLogicalSwitchEntry 9 } + + alaOpenflowLogicalSwitchLearnedMacUpdate OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is only applicable to Logical Switches in api(2) mode. + When enabled(1), learned MACs will be forwarded to controllers + via a Packet-In message." + DEFVAL { disabled } + ::= { alaOpenflowLogicalSwitchEntry 10 } + + alaOpenflowLogicalSwitchProbeTime OBJECT-TYPE + SYNTAX Integer32 (1..60) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Probe-time for a logical switch in the pfc-channel mode in seconds, + which will override the existing global idle-probe-time for sending + echo-request to the OpenFlow Controller." + DEFVAL { 5 } + ::= { alaOpenflowLogicalSwitchEntry 11 } + + alaOpenflowLogicalSwitchFailureDetectTime OBJECT-TYPE + SYNTAX Integer32 (1..60) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Failure detect time, in seconds, is configured for a logical switch + in the pfc-channel mode for detecting disconnection to the + OpenFlow Controller if there was no echo reply or message from the controller." + DEFVAL { 4 } + ::= { alaOpenflowLogicalSwitchEntry 12 } + + alaOpenflowLogicalSwitchDPID OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (8)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An unique 8 bytes DPID for a logical switch." + ::= { alaOpenflowLogicalSwitchEntry 13 } + + alaOpenflowLogicalSwitchTableMissAction OBJECT-TYPE + SYNTAX INTEGER { + drop(1), + controller(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The action to be taken when an Openflow Table Miss occurs. When set to drop + if any packet has a table miss, it will be dropped. If set to controller + it will be forwarded to the controller." + DEFVAL { drop } + ::= { alaOpenflowLogicalSwitchEntry 14 } + + alaOpenflowLogicalSwitchTCPBufferSizeTx OBJECT-TYPE + SYNTAX Unsigned32 (2..32) + UNITS "Kilo Bytes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "TCP send buffer size, in Kilo Bytes, for socket connection to OpenFlow controllers + in the logical switch." + DEFVAL { 2 } + ::= { alaOpenflowLogicalSwitchEntry 15 } + + alaOpenflowLogicalSwitchTCPBufferSizeRx OBJECT-TYPE + SYNTAX Unsigned32 (2..32) + UNITS "Kilo Bytes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "TCP receive buffer size, in Kilo Bytes, for socket connection to OpenFlow controllers + in the logical switch." + DEFVAL { 2 } + ::= { alaOpenflowLogicalSwitchEntry 16 } + + -- Openflow Controller Table + + alaOpenflowControllerTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaOpenflowControllerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains one row for each controller on each logical switch. + Currently, up to three controllers per logical switch are supported per logical switch." + ::= { alcatelIND1OpenflowMIBObjects 3 } + + alaOpenflowControllerEntry OBJECT-TYPE + SYNTAX AlaOpenflowControllerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about the Openflow Controllers attached to Logical Switches. " + INDEX { alaOpenflowControllerLogicalSwitch, alaOpenflowControllerIpType, alaOpenflowControllerIp, alaOpenflowControllerPort } + ::= { alaOpenflowControllerTable 1 } + + AlaOpenflowControllerEntry ::= SEQUENCE + { + alaOpenflowControllerLogicalSwitch SnmpAdminString, + alaOpenflowControllerIpType InetAddressType, + alaOpenflowControllerIp InetAddress, + alaOpenflowControllerPort Integer32, + alaOpenflowControllerRole INTEGER, + alaOpenflowControllerAdminState INTEGER, + alaOpenflowControllerOperState INTEGER, + alaOpenflowControllerRowStatus RowStatus, + alaOpenflowControllerPriority Integer32 + } + + alaOpenflowControllerLogicalSwitch OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..31)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Openflow Logical Switch Name." + ::= { alaOpenflowControllerEntry 1 } + + alaOpenflowControllerIpType OBJECT-TYPE + SYNTAX InetAddressType(1) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Openflow Controller IP Address Type. The only type currently supported is ipv4(1)" + ::= { alaOpenflowControllerEntry 2 } + + alaOpenflowControllerIp OBJECT-TYPE + SYNTAX InetAddress(SIZE (4|16)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Openflow Controller IP Address. As specified by alaOpenflowControllerIpType, + only ipv4 is currently supported" + ::= { alaOpenflowControllerEntry 3 } + + alaOpenflowControllerPort OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Openflow Controller Port." + ::= { alaOpenflowControllerEntry 4 } + + alaOpenflowControllerRole OBJECT-TYPE + SYNTAX INTEGER { + equal(1), + master(2), + slave(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Role of the Controller for the Logical Switch. The role is negotiated by the + controllers and the switch is notified of the outcome (1.3.1+). 1.0 controllers + will always have the role of equal. Only one controller per Logical Switch + can have the role of master." + ::= { alaOpenflowControllerEntry 5 } + + alaOpenflowControllerAdminState OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controller Admin State. Enable or disable connection to the controller. + The Logical Switch runs in 'Fail Secure Mode' so all flow aging, etc + continues unaffected when the controller is administratively disabled." + DEFVAL { enabled } + ::= { alaOpenflowControllerEntry 6 } + + alaOpenflowControllerOperState OBJECT-TYPE + SYNTAX INTEGER { + invalid(1), + disabled(2), + sendError(3), + init(4), + connecting(5), + backoff(6), + exchangingHello(7), + active(8), + idle(9), + disconnected(10) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "State of the Logical Switch connection to the Controller." + ::= { alaOpenflowControllerEntry 7 } + + alaOpenflowControllerRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable, + an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable." + ::= { alaOpenflowControllerEntry 8 } + + alaOpenflowControllerPriority OBJECT-TYPE + SYNTAX Integer32(0..2) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Openflow Controller Priority. Priority value of 0 implies highest pririoty and 2 implies lowest." + DEFVAL { 2 } + ::= { alaOpenflowControllerEntry 9 } + + -- Openflow Interface Table + + alaOpenflowInterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaOpenflowInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains one row for each interface (port or link aggregation) assigned to + a logical switch. An interface can only belong to one logical switch at a time. + If a logical switch in API mode exists, interfaces cannot be manually added to/deleted from it; + instead, interfaces default to the API mode logical switch when not assigned to another Logical Switch. + Interfaces can be reassigned from the API mode logical switch to a normal mode logical switch + (by adding it to that normal mode logical switch) but not directly reassigned from one normal mode + logical switch to another normal mode logical switch." + ::= { alcatelIND1OpenflowMIBObjects 4 } + + alaOpenflowInterfaceEntry OBJECT-TYPE + SYNTAX AlaOpenflowInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about the interfaces assigned to Openflow Logical Switches." + INDEX { alaOpenflowInterfaceLogicalSwitch, alaOpenflowInterface } + ::= { alaOpenflowInterfaceTable 1 } + + AlaOpenflowInterfaceEntry ::= SEQUENCE + { + alaOpenflowInterfaceLogicalSwitch SnmpAdminString, + alaOpenflowInterface Integer32, + alaOpenflowInterfaceMode INTEGER, + alaOpenflowInterfaceRowStatus RowStatus, + alaOpenflowInterfaceType INTEGER, + alaOpenflowInterfaceNativeVlan Unsigned32 + } + + alaOpenflowInterfaceLogicalSwitch OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..31)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Openflow Logical Switch Name." + ::= { alaOpenflowInterfaceEntry 1 } + + alaOpenflowInterface OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Openflow Interface attached to a Logical Switch. Port values are dot1dBasePort values, + Link Aggregations start at 32769." + ::= { alaOpenflowInterfaceEntry 2 } + + alaOpenflowInterfaceMode OBJECT-TYPE + SYNTAX INTEGER { + normal(1), + api(2), + pfcChannel(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Openflow Interface Mode. Normal is regular Openflow, + API is for ACL like flow operation and PFC-Channel is for NEC OFC." + ::= { alaOpenflowInterfaceEntry 3 } + + alaOpenflowInterfaceRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable, + an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable." + ::= { alaOpenflowInterfaceEntry 4 } + + alaOpenflowInterfaceType OBJECT-TYPE + SYNTAX INTEGER { + trunk (1), + access (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Openflow Interface Type." + ::= { alaOpenflowInterfaceEntry 5 } + + alaOpenflowInterfaceNativeVlan OBJECT-TYPE + SYNTAX Unsigned32 (2..4093) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Native VLAN for Openflow Interface." + ::= { alaOpenflowInterfaceEntry 6 } + + -- Openflow Interface VLAN Table + + alaOpenflowInterfaceVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaOpenflowInterfaceVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains a list of Tag VLANs for an OpenFlow Interface (port or link-aggregation) Entry. + logical switch belongs to." + ::= { alcatelIND1OpenflowMIBObjects 5 } + + alaOpenflowInterfaceVlanEntry OBJECT-TYPE + SYNTAX AlaOpenflowInterfaceVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about the Tag VLANs associated with an OpenFlow Interface." + INDEX { alaOpenflowInterfaceLogicalSwitch, alaOpenflowInterface, alaOpenflowInterfaceVlanVlanID } + ::= { alaOpenflowInterfaceVlanTable 1 } + + AlaOpenflowInterfaceVlanEntry ::= SEQUENCE + { + alaOpenflowInterfaceVlanVlanID Unsigned32, + alaOpenflowInterfaceVlanRowStatus RowStatus + } + + alaOpenflowInterfaceVlanVlanID OBJECT-TYPE + SYNTAX Unsigned32 (0|2..4093) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Tag VLAN for an Openflow Interface." + DEFVAL { 0 } + ::= { alaOpenflowInterfaceVlanEntry 1 } + + alaOpenflowInterfaceVlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "On create, the specified logical switch interface must exist in alaOpenflowInterfaceTable, + otherwise an entry creation in this table would not be allowed. Deletion of an interface entry in + alaOpenflowInterfaceTable would result in deletion of all entries for that interface in the + alaOpenflowInterfaceVlanEntry" + ::= { alaOpenflowInterfaceVlanEntry 2 } + + -- Openflow MIB Conformance and Compliances + + alcatelIND1OpenflowMIBGroups OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For ALU Openflow MIB Subsystem Units Of Conformance." + ::= { alcatelIND1OpenflowMIBConformance 1 } + + alcatelIND1OpenflowMIBCompliances OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For ALU Openflow MIB Subsystem Compliance Statements." + ::= { alcatelIND1OpenflowMIBConformance 2 } + + + alaOpenflowMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for Openflow." + MODULE -- This module + MANDATORY-GROUPS + { + alaOpenflowModuleConfigGroup, + alaOpenflowModuleLogicalSwitchGroup, + alaOpenflowModuleControllerGroup, + alaOpenflowModuleInterfaceGroup, + alaOpenflowModuleInterfaceVlanGroup + } + ::= { alcatelIND1OpenflowMIBCompliances 1 } + + alaOpenflowModuleConfigGroup OBJECT-GROUP + OBJECTS + { + alaOpenflowGlobalBackoffMax, + alaOpenflowGlobalIdleProbeTimeout + } + STATUS current + DESCRIPTION + "Openflow Global Configuration Modules Group." + ::= { alcatelIND1OpenflowMIBGroups 1 } + + + alaOpenflowModuleLogicalSwitchGroup OBJECT-GROUP + OBJECTS + { + alaOpenflowLogicalSwitchAdminState, + alaOpenflowLogicalSwitchMode, + alaOpenflowLogicalSwitchVersions, + alaOpenflowLogicalSwitchVlan, + alaOpenflowLogicalSwitchControllerCount, + alaOpenflowLogicalSwitchInterfaceCount, + alaOpenflowLogicalSwitchFlowCount, + alaOpenflowLogicalSwitchRowStatus, + alaOpenflowLogicalSwitchLearnedMacUpdate, + alaOpenflowLogicalSwitchProbeTime, + alaOpenflowLogicalSwitchFailureDetectTime, + alaOpenflowLogicalSwitchDPID, + alaOpenflowLogicalSwitchTableMissAction, + alaOpenflowLogicalSwitchTCPBufferSizeTx, + alaOpenflowLogicalSwitchTCPBufferSizeRx + } + STATUS current + DESCRIPTION + "Openflow Logical Switch Configuration Modules Group." + ::= { alcatelIND1OpenflowMIBGroups 2 } + + alaOpenflowModuleControllerGroup OBJECT-GROUP + OBJECTS + { + alaOpenflowControllerRole, + alaOpenflowControllerAdminState, + alaOpenflowControllerOperState, + alaOpenflowControllerRowStatus, + alaOpenflowControllerPriority + } + STATUS current + DESCRIPTION + "Openflow Controller Configuration Modules Group." + ::= { alcatelIND1OpenflowMIBGroups 3 } + + alaOpenflowModuleInterfaceGroup OBJECT-GROUP + OBJECTS + { + alaOpenflowInterfaceMode, + alaOpenflowInterfaceRowStatus, + alaOpenflowInterfaceType, + alaOpenflowInterfaceNativeVlan + } + STATUS current + DESCRIPTION + "Openflow Interface Configuration Modules Group." + ::= { alcatelIND1OpenflowMIBGroups 4 } + + alaOpenflowModuleInterfaceVlanGroup OBJECT-GROUP + OBJECTS + { + alaOpenflowInterfaceVlanRowStatus + } + STATUS current + DESCRIPTION + "Openflow Interface with VLAN Configuration Modules Group." + ::= { alcatelIND1OpenflowMIBGroups 5 } + + END |