diff options
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-PIM-MIB')
| -rw-r--r-- | MIBS/nokia/aos7/ALCATEL-IND1-PIM-MIB | 942 |
1 files changed, 942 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-PIM-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-PIM-MIB new file mode 100644 index 0000000..8a53964 --- /dev/null +++ b/MIBS/nokia/aos7/ALCATEL-IND1-PIM-MIB @@ -0,0 +1,942 @@ +ALCATEL-IND1-PIM-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE, + IpAddress, Integer32, TimeTicks, + Unsigned32, Counter32 + FROM SNMPv2-SMI + InetAddressType, InetAddress, + InetAddressPrefixLength + FROM INET-ADDRESS-MIB + pimInterfaceEntry + FROM PIM-STD-MIB + RowStatus, TruthValue + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + routingIND1Pim + FROM ALCATEL-IND1-BASE; + +alcatelIND1PIMMIB MODULE-IDENTITY + + LAST-UPDATED "201505280000Z" + ORGANIZATION "Alcatel-Lucent" + CONTACT-INFO + "Please consult with Customer Service to ensure the most appropriate + version of this document is used with the products in question: + + Alcatel-Lucent, Enterprise Solutions Division + (Formerly Alcatel Internetworking, Incorporated) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + + DESCRIPTION + "This module describes an authoritative enterprise-specific Simple + Network Management Protocol (SNMP) Management Information Base (MIB): + + This proprietary MIB contains management information for + the configuration of PIM-SM and PIM-DM global configuration + parameters. + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 1995-2007 Alcatel-Lucent + Copyright (C) 2015 ALE USA, Inc. + ALL RIGHTS RESERVED WORLDWIDE" + + REVISION "200704030000Z" + DESCRIPTION + "The latest version of this MIB Module." + REVISION "201505280000Z" + DESCRIPTION + "Added V4/V6 bidir ssm compatibility, bidir fast-join, asm fast-join and ssm-fast-join." + + ::= { routingIND1Pim 1 } + +alcatelIND1PIMMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 1 } + +alaPimsmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 1 } +alaPimdmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 2 } +alaPimGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 3 } + +-- ************************************************************************ +-- PIM-SM Global Configuration +-- ************************************************************************ + +alaPimsmAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables the + PIM-SM protocol on this router." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 1} + +alaPimsmMaxRPs OBJECT-TYPE + SYNTAX Integer32 (1..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of C-RPs allowed in the PIM-SM + domain." + DEFVAL { 32 } + ::= { alaPimsmGlobalConfig 2 } + +alaPimsmProbeTime OBJECT-TYPE + SYNTAX Integer32 (1..300) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When NULL Registers are used, this is the time + between sending a NULL Register and the Register- + Suppression-Timer expiring unless it is restarted + by receiving a Register-Stop." + DEFVAL { 5 } + ::= { alaPimsmGlobalConfig 3} + +alaPimsmOldRegisterMessageSupport OBJECT-TYPE + SYNTAX INTEGER { + header(1), + full(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the application of the checksum function on + received Register messages in the PIM-SM domain. When + set to full(2), the checksum for a register message + is computed for the entire packet (i.e. includes data). + When set to header(1), the checksum is done only on the + first 8 bytes of the packet. This variable is provided + for interoperability reasons and may be required for + Compatibility with older implementations of PIM-SM v2. + This parameter must be set the same throughout the + PIM-SM domain." + DEFVAL { header } + ::= { alaPimsmGlobalConfig 4 } + +alaPimsmAdminSPTConfig OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables SPT Switchover + upon receiving the first data packet." + DEFVAL { enable } + ::= {alaPimsmGlobalConfig 5 } + +alaPimsmRPThreshold OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the RP threshold value (in bps) to be used + in determining when to switch to native + forwarding at the RP. The value of 0 + disables the RP Threshold functionality." + DEFVAL { 1 } + ::= {alaPimsmGlobalConfig 6 } + +alaPimsmV6AdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables the + PIM-SM IPv6 protocol on this router." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 7 } + +alaPimsmV6SPTConfig OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables PIM IPv6 SPT Switchover + upon receiving the first data packet." + DEFVAL { enable } + ::= {alaPimsmGlobalConfig 8 } + +alaPimsmV6RPSwitchover OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether PIM IPv6 + will attempt to switch to native forwarding at the RP + upon receiving the first register-encapsulated packet." + DEFVAL { enable } + ::= {alaPimsmGlobalConfig 9 } + +alaPimsmBidirStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables the + PIM BIDIR protocol on this router." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 10} + +alaPimsmBidirPeriodicInterval OBJECT-TYPE + SYNTAX Integer32 (0..2000) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the interval at which the DF for each RPA + will periodically announce its status in a + Winner message. + + A value of 0 indicates that periodic messages will + not be sent." + DEFVAL { 60 } + ::= { alaPimsmGlobalConfig 11 } + +alaPimsmBidirDFAbort OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether the DF + election will be automatically aborted if a PIM hello + is received from a PIM neighbor without the + bidirectional capable option. By default, the DF + election will still occur among those PIM routers that + support BIDIR. By enabling this option, if a BIDIR- + capable router receives a PIM hello from a + non-BIDIR-capable router, the DF election is aborted." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 12} + + +alaPimsmNonBidirHelloPeriod OBJECT-TYPE + SYNTAX Unsigned32 (10..65535) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum time that must elapse between + alaPimNonBidirHello notifications originated by this router. + The default value of 65535 represents an 'infinite' time, in + which case, no alaPimNonBidirHello notifications are ever + sent. + + The non-zero minimum allowed value provides resilience + against propagation of denial-of-service attacks from the + control plane to the network management plane." + DEFVAL { 65535 } + ::= { alaPimsmGlobalConfig 13 } + +alaPimsmNonBidirHelloMsgsRcvd OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of PIM Hello messages that have been + received by a BIDIR-capable device that do not have the + Bidirectional Capable option. + + This counter is incremented if BIDIR mode is enabled on + this router and a PIM Hello message is received from a + PIM neighbor that does not include the Bidirectional Capable + option. + + By default, the reception of these messages will not + effect the BIDIR DF election. The alaPimsmBidirDFAbort + object may be used to change the default behavior + and have the DF election aborted whenever a BIDIR-capable + router receives a PIM hello from a non-BIDIR-capable + router." + ::= { alaPimsmGlobalConfig 14 } + +alaPimsmNonBidirHelloAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address type stored in alaPimsmNonBidirHelloOrigin. + + If no Non Bidir Hello messages have been received, this + object is set to unknown(0)." + ::= { alaPimsmGlobalConfig 15 } + +alaPimsmNonBidirHelloOrigin OBJECT-TYPE + SYNTAX InetAddress (SIZE (0|4|8|16|20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The source address of the last Non Bidir Hello message + received by this device." + ::= { alaPimsmGlobalConfig 16 } + +alaPimsmV6BidirStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables the + PIM IPv6 BIDIR protocol on this router." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 17} + +alaPimsmRPHashStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables applying the PIM hash function + defined in RFC 4601 when selecting an RP from two or more equal + group-range-to-RP mappings." + REFERENCE "RFC 4601 section 4.7.2" + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 18 } + +alaPimsmBidirSsmCompat OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether PIM + BIDIR will support receiving IGMPv3 source-specific + joins and treat them as a (*,G) join. + By default, IGMPv3 source-specific joins are ignored + when PIM is operating in BIDIR mode." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 19} + +alaPimsmV6BidirSsmCompat OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether IPv6 PIM + BIDIR will support receiving MLDv2 source-specific + joins and treat them as a (*,G) join. + By default, MLDv2 source-specific joins are ignored + when PIM is operating in BIDIR mode." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 20} + +alaPimsmBidirFastJoin OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether PIM + BIDIR will automatically create the routes in hardware + as soon as the BIDIR (*,G) routes are learned. + By default, this is disabled and the routes are not + installed in hardware until the multicast traffic + reaches the switch." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 21} + +alaPimsmV6BidirFastJoin OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether IPv6 PIM + BIDIR will automatically create the routes in hardware + as soon as the BIDIR (*,G) routes are learned. + By default, this is disabled and the routes are not + installed in hardware until the multicast traffic + reaches the switch." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 22} + +alaPimsmAsmFastJoin OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether PIM + ASM will automatically create the (*,G) routes in + hardware as soon as the ASM (*,G) routes are learned. + By default, this is disabled and the routes are not + installed in hardware until the multicast traffic + reaches the switch." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 23} + +alaPimsmV6AsmFastJoin OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether IPv6 PIM + ASM will automatically create the (*,G) routes in + hardware as soon as the ASM (*,G) routes are learned. + By default, this is disabled and the routes are not + installed in hardware until the multicast traffic + reaches the switch." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 24} + +alaPimsmSsmFastJoin OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether PIM + will automatically create the (S,G) routes in + hardware as soon as the (S,G) routes are learned. + This includes PIM Sparse Mode (S,G) routes as well + as PIM SSM (S,G) routes. + By default, this is disabled and the routes are not + installed in hardware until the multicast traffic + reaches the switch." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 25} + +alaPimsmV6SsmFastJoin OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables whether IPv6 PIM + will automatically create the (S,G) routes in hardware + as soon as the (S,G) routes are learned. + This includes PIM Sparse Mode (S,G) routes as well + as PIM SSM (S,G) routes. + By default, this is disabled and the routes are not + installed in hardware until the multicast traffic + reaches the switch." + DEFVAL { disable } + ::= {alaPimsmGlobalConfig 26} + + +-- ************************************************************************ +-- PIM-DM Global Configuration +-- ************************************************************************ + +alaPimdmAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables the + PIM-DM protocol on this router." + DEFVAL { disable } + ::= {alaPimdmGlobalConfig 1} + +alaPimdmStateRefreshTimeToLive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The TTL to be used by this router's originated State + Refresh messages if the data packet's TTL is not + recorded." + DEFVAL { 16 } + ::= {alaPimdmGlobalConfig 2} + +alaPimdmStateRefreshLimitInterval OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This router will not forward successive State Refresh + messages received at less than this interval." + DEFVAL { 0 } + ::= {alaPimdmGlobalConfig 3} + +alaPimdmV6AdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables the + PIM-DM IPv6 protocol on this router." + DEFVAL { disable } + ::= {alaPimdmGlobalConfig 4} + +-- +-- The PIM Dense Group Table +-- This table allows the configuration of pim group mappings to be +-- used with dense mode. These mappings correspond to the sparse +-- mappings defined in the pimStaticRPTable defined in the PIM-STD-MIB. +-- + +alaPimdmDenseGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaPimdmDenseGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to manage configuration of dense groups. + + If the group prefixes configured for two or more rows in + this table overlap, the row with the greatest value of + alaPimdmDenseGroupGrpPrefixLength is used for the overlapping + range." + ::= { alaPimdmGlobalConfig 5 } + +alaPimdmDenseGroupEntry OBJECT-TYPE + SYNTAX AlaPimdmDenseGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (conceptual row) in the alaPimdmDenseGroupTable. This + entry is preserved on agent restart." + INDEX { alaPimdmDenseGroupAddressType, + alaPimdmDenseGroupGrpAddress, + alaPimdmDenseGroupGrpPrefixLength } + ::= { alaPimdmDenseGroupTable 1 } + +AlaPimdmDenseGroupEntry ::= SEQUENCE { + alaPimdmDenseGroupAddressType InetAddressType, + alaPimdmDenseGroupGrpAddress InetAddress, + alaPimdmDenseGroupGrpPrefixLength InetAddressPrefixLength, + alaPimdmDenseGroupOverrideDynamic TruthValue, + alaPimdmDenseGroupPrecedence Unsigned32, + alaPimdmDenseGroupRowStatus RowStatus +} + +alaPimdmDenseGroupAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The address type of this entry." + ::= { alaPimdmDenseGroupEntry 1 } + +alaPimdmDenseGroupGrpAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE (4|8|16|20)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The multicast group address that, when combined with + alaPimdmDenseGroupGrpPrefixLength, gives the group prefix for this + entry. The InetAddressType is given by the + alaPimdmDenseGroupAddressType object. + + This address object is only significant up to + alaPimdmDenseGroupGrpPrefixLength bits. The remainder of the + address bits are zero. This is especially important for + this index field, which is part of the index of this entry. + Any non-zero bits would signify an entirely different + entry." + ::= { alaPimdmDenseGroupEntry 2 } + +alaPimdmDenseGroupGrpPrefixLength OBJECT-TYPE + SYNTAX InetAddressPrefixLength (4..128) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The multicast group prefix length that, when combined + with alaPimdmDenseGroupGrpAddress, gives the group prefix for this + entry. The InetAddressType is given by the + alaPimdmDenseGroupAddressType object. If alaPimdmDenseGroupAddressType is + 'ipv4' or 'ipv4z', this object must be in the range 4..32. + If alaPimdmDenseGroupGrpAddressType is 'ipv6' or 'ipv6z', this + object must be in the range 8..128." + ::= { alaPimdmDenseGroupEntry 3 } + +alaPimdmDenseGroupOverrideDynamic OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Whether this dense group configuration will override other + group mappings in this group prefix. If this object is + TRUE, then it will override: + + - RP information learned dynamically for groups in this + group prefix. + + - RP information configured in alaPimdmDenseGroupTable with + alaPimdmDenseGroupOverrideDynamic set to FALSE. + + See pimGroupMappingTable for details." + DEFVAL { false } + ::= { alaPimdmDenseGroupEntry 4 } + +alaPimdmDenseGroupPrecedence OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value for pimGroupMappingPrecedence to be used for this + static RP configuration. This allows fine control over + which configuration is overridden by this static + configuration. + + If alaPimdmDenseGroupOverrideDynamic is set to TRUE, all dynamic RP + configuration is overridden by this static configuration, + whatever the value of this object. + + The absolute values of this object have a significance only + on the local router and do not need to be coordinated with + other routers. A setting of this object may have different + effects when applied to other routers. + + Do not use this object unless fine control of static RP + behavior on the local router is required." + ::= { alaPimdmDenseGroupEntry 5 } + +alaPimdmDenseGroupRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this row, by which rows in this table can + be created and destroyed. + + All writeable objects in this entry can be modified when the + status of this entry is active(1)." + ::= { alaPimdmDenseGroupEntry 6 } + + +-- ************************************************************************ +-- PIM Global Configuration +-- ************************************************************************ + +alaPimBfdStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables PIM + with the BFD protocol on this router." + DEFVAL { disable } + ::= {alaPimGlobalConfig 1} + +alaPimBfdAllInterfaceStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables BFD + for all PIM interfaces on this router." + DEFVAL { disable } + ::= {alaPimGlobalConfig 2} + +alaPimMoFRRStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables MoFRR + (Multicast only Fast Re-Route) on this router." + DEFVAL { disable } + ::= {alaPimGlobalConfig 3} + +alaPimMoFRRAllRouteStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "By default, MoFRR is only applied to multicast + routes that have local clients. Enabling + alaPimMoFRRAllRouteStatus will enable MoFRR + on all routes whether there are local clients + or not. alaPimMoFRRStatus must be enabled for + this to take effect." + DEFVAL { disable } + ::= {alaPimGlobalConfig 4} + +-- ************************************************************************ +-- Expansion of pimInterfaceEntry +-- ************************************************************************ + +alaPimInterfaceAugTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaPimInterfaceAugEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Expansion for pimInterfaceTable" + ::= { alaPimGlobalConfig 5 } + +alaPimInterfaceAugEntry OBJECT-TYPE + SYNTAX AlaPimInterfaceAugEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of alaPimInterfaceAugTable" + AUGMENTS { pimInterfaceEntry } + ::= { alaPimInterfaceAugTable 1 } + +AlaPimInterfaceAugEntry ::= SEQUENCE { + alaPimInterfaceBfdStatus INTEGER +} + +alaPimInterfaceBfdStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables/Disables BFD for particular interfaces of PIM." + DEFVAL { disable } + ::= { alaPimInterfaceAugEntry 1 } + +alaPimMbrAllSourcesStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables PIM to notify DVMRP about + the routes to all multicast sources learned instead of just + the directly connected subnets so that these routes can be + advertised in the DVMRP domain via standard DVMRP mechanisms. + This object is only applicable if the router is operating as + a Multicast Border Router." + DEFVAL { disable } + ::= {alaPimGlobalConfig 6} + +alaPimMbrOperStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Whether MBR is currently enabled/disabled for PIM." + ::= {alaPimGlobalConfig 7} + +alaPimV6BfdStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables PIM IPv6 + with the BFD protocol on this router." + DEFVAL { disable } + ::= {alaPimGlobalConfig 8} + +alaPimV6BfdAllInterfaceStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administratively enables/disables BFD + for all PIM IPv6 interfaces on this router." + DEFVAL { disable } + ::= {alaPimGlobalConfig 9} + +-- ************************************************************************ +-- PIM Notifications +-- ************************************************************************ + +alaPimNotifications OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 0 } + +alaPimNonBidirHello NOTIFICATION-TYPE + OBJECTS { alaPimsmNonBidirHelloAddressType, + alaPimsmNonBidirHelloOrigin } + STATUS current + DESCRIPTION + "An alaPimNonBidirHello notification signifies that + a bidir-capable router has received a PIM hello from + a non-bidir-capable router. + + This notification is generated whenever the counter + alaPimsmNonBidirHelloMsgsRcvd is incremented, subject + to the rate limit specified by + alaPimsmNonBidirHelloNotificationPeriod." + ::= { alaPimNotifications 1 } + +-- conformance information + +alcatelIND1PIMMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 2 } +alcatelIND1PIMMIBCompliances OBJECT IDENTIFIER ::= + { alcatelIND1PIMMIBConformance 1 } +alcatelIND1PIMMIBGroups OBJECT IDENTIFIER ::= + { alcatelIND1PIMMIBConformance 2 } + + +-- compliance statements + +alaPimsmCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for routers running PIM Sparse + Mode and implementing the ALCATEL-IND1-PIM MIB." + MODULE -- this module + MANDATORY-GROUPS { alaPimsmConfigMIBGroup, alaPimConfigMIBGroup } + + ::= { alcatelIND1PIMMIBCompliances 1 } + +alaPimdmCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for routers running PIM Dense + Mode and implementing the ALCATEL-IND1-PIM MIB." + MODULE -- this module + MANDATORY-GROUPS { alaPimdmConfigMIBGroup, alaPimConfigMIBGroup } + + ::= { alcatelIND1PIMMIBCompliances 2 } + +-- units of conformance + +alaPimsmConfigMIBGroup OBJECT-GROUP + OBJECTS { alaPimsmAdminStatus, alaPimsmMaxRPs, + alaPimsmProbeTime, alaPimsmOldRegisterMessageSupport, + alaPimsmAdminSPTConfig, alaPimsmRPThreshold, + alaPimsmV6AdminStatus, alaPimsmV6SPTConfig, + alaPimsmV6RPSwitchover, alaPimsmBidirStatus, + alaPimsmBidirPeriodicInterval, alaPimsmBidirDFAbort, + alaPimsmNonBidirHelloPeriod, alaPimsmNonBidirHelloMsgsRcvd, + alaPimsmV6BidirStatus, alaPimsmRPHashStatus, + alaPimsmBidirSsmCompat, alaPimsmV6BidirSsmCompat, + alaPimsmBidirFastJoin, alaPimsmV6BidirFastJoin, + alaPimsmAsmFastJoin, alaPimsmV6AsmFastJoin, + alaPimsmSsmFastJoin, alaPimsmV6SsmFastJoin + } + STATUS current + DESCRIPTION + "A collection of objects to support management of global + configuration parameters of PIM Sparse Mode routers." + ::= { alcatelIND1PIMMIBGroups 1 } + +alaPimdmConfigMIBGroup OBJECT-GROUP + OBJECTS { alaPimdmAdminStatus, alaPimdmStateRefreshTimeToLive, + alaPimdmStateRefreshLimitInterval, + alaPimdmV6AdminStatus, alaPimdmDenseGroupOverrideDynamic, + alaPimdmDenseGroupPrecedence, alaPimdmDenseGroupRowStatus + } + STATUS current + DESCRIPTION + "A collection of objects to support management of global + configuration parameters of PIM Dense Mode routers." + ::= { alcatelIND1PIMMIBGroups 2 } + +alaPimConfigMIBGroup OBJECT-GROUP + OBJECTS { alaPimBfdStatus, + alaPimBfdAllInterfaceStatus, + alaPimMoFRRStatus, + alaPimMoFRRAllRouteStatus, + alaPimInterfaceBfdStatus, + alaPimMbrAllSourcesStatus, + alaPimMbrOperStatus, + alaPimV6BfdStatus, + alaPimV6BfdAllInterfaceStatus + } + STATUS current + DESCRIPTION + "A collection of objects to support management of global + configuration parameters of PIM routers." + ::= { alcatelIND1PIMMIBGroups 3 } + +alaPimOptionalGroup OBJECT-GROUP + OBJECTS { + alaPimsmNonBidirHelloAddressType, + alaPimsmNonBidirHelloOrigin + } + STATUS current + DESCRIPTION + " PIM objects to stop the tools from complaining " + ::= { alcatelIND1PIMMIBGroups 4 } + +alaPimNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { + alaPimNonBidirHello + } + STATUS current + DESCRIPTION + " PIM Notification objects " + ::= { alcatelIND1PIMMIBGroups 5 } + +END |