diff options
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-QCN-MIB')
| -rw-r--r-- | MIBS/nokia/aos7/ALCATEL-IND1-QCN-MIB | 281 |
1 files changed, 281 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-QCN-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-QCN-MIB new file mode 100644 index 0000000..6d5a65d --- /dev/null +++ b/MIBS/nokia/aos7/ALCATEL-IND1-QCN-MIB @@ -0,0 +1,281 @@ +ALCATEL-IND1-QCN-MIB DEFINITIONS ::= BEGIN + +IMPORTS + Integer32, + MODULE-IDENTITY, + OBJECT-TYPE, + OBJECT-IDENTITY, + Unsigned32 + FROM SNMPv2-SMI + TruthValue + FROM SNMPv2-TC + OBJECT-GROUP, + MODULE-COMPLIANCE + FROM SNMPv2-CONF + softentIND1QcnMib + FROM ALCATEL-IND1-BASE; + +alcatelIND1QcnMIB MODULE-IDENTITY + LAST-UPDATED "201109010000Z" + ORGANIZATION "Alcatel-Lucent" + CONTACT-INFO + "Please consult with Customer Service to ensure the most appropriate + version of this document is used with the products in question: + + Alcatel-Lucent, Enterprise Solutions Division + (Formerly Alcatel Internetworking, Incorporated) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + + DESCRIPTION + "This module describes an authoritative enterprise-specific Simple + Network Management Protocol (SNMP) Management Information Base (MIB): + + For the Birds Of Prey Product Line + System Capability Manager, to allow for system control and limitation setting, of + different, features through out the system. + Capability manager is a centralized process which provides hardware information and + capability to other processes. To optimize the system performance , certain features + may be configured to a lower than the hardware limit through capability manager. + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 1995-2011 Alcatel-Lucent + ALL RIGHTS RESERVED WORLDWIDE" + + REVISION "201109010000Z" + DESCRIPTION + "Capability Manager is used to set system wide limitation." + ::= { softentIND1QcnMib 1 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + + alcatelIND1QcnMIBObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For QCN Subsystem Managed Objects." + ::= { alcatelIND1QcnMIB 1 } + + alcatelIND1QcnMIBConformance OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For QCN Subsystem Conformance Information." + ::= { alcatelIND1QcnMIB 2 } + + alcatelIND1QcnMIBGroups OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For QCN Subsystem Units Of Conformance." + ::= { alcatelIND1QcnMIBConformance 1 } + + alcatelIND1QcnMIBCompliances OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For QCN Subsystem Compliance Statements." + ::= { alcatelIND1QcnMIBConformance 2 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + + alaQcnConfig OBJECT IDENTIFIER ::= { alcatelIND1QcnMIBObjects 1 } + alaQcnConformance OBJECT IDENTIFIER ::= { alcatelIND1QcnMIBObjects 2 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- xxxxxxxxxxxxxxxxxxxx +-- QCN Global Controls +-- xxxxxxxxxxxxxxxxxxxx + +alaQcnGlobalTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaQcnGlobalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of QCN global configuration." + ::= { alaQcnConfig 1 } + +alaQcnGlobalEntry OBJECT-TYPE + SYNTAX AlaQcnGlobalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A QCN global Entry." + INDEX { alaQcnGlobalCompId } + ::= { alaQcnGlobalTable 1 } + +AlaQcnGlobalEntry ::= SEQUENCE { + alaQcnGlobalCompId + Integer32, + alaQcnGlobalCNMVlanTag + Integer32, + alaQcnGlobalCID + Integer32 + } + +alaQcnGlobalCompId OBJECT-TYPE + SYNTAX Integer32 (1) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Comp Id is the index to this table." + ::= { alaQcnGlobalEntry 1 } + +alaQcnGlobalCNMVlanTag OBJECT-TYPE + SYNTAX Integer32 (0..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When set, the vlan tag overrides the incoming vlan id and forces + CNMs to be transmitted in that vlan." + DEFVAL { 0 } + ::= { alaQcnGlobalEntry 2 } + +alaQcnGlobalCID OBJECT-TYPE + SYNTAX Integer32 (0..16777215) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the Congestion Point ID sent as part of the Congestion + Notification Message." + DEFVAL { 0 } + ::= { alaQcnGlobalEntry 3 } + +-- xxxxxxxxxxxxxxxxxxxxxxxx +-- QCN Port Instance Table +-- xxxxxxxxxxxxxxxxxxxxxxxx + +alaQcnPortInstanceTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlaQcnPortInstanceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of DCP Port Instances." + ::= { alaQcnConfig 2 } + +alaQcnPortInstanceEntry OBJECT-TYPE + SYNTAX AlaQcnPortInstanceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A DCP Port Instance Entry." + INDEX { alaQcnPIIfIndex, alaQcnPIPriority } + ::= { alaQcnPortInstanceTable 1 } + +AlaQcnPortInstanceEntry ::= SEQUENCE { + alaQcnPIIfIndex + Unsigned32, + alaQcnPIPriority + Unsigned32, + alaQcnPIPriorityReset + TruthValue, + alaQcnPICncpStatsClear + TruthValue, + alaQcnPICncpReset + TruthValue + } + +alaQcnPIIfIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IfIndex of this port." + ::= { alaQcnPortInstanceEntry 1 } + +alaQcnPIPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Priority identifier of this port." + ::= { alaQcnPortInstanceEntry 2 } + +alaQcnPIPriorityReset OBJECT-TYPE + SYNTAX TruthValue { true(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to true to reset the priority configuration to the global default." + ::= { alaQcnPortInstanceEntry 3 } + +alaQcnPICncpStatsClear OBJECT-TYPE + SYNTAX TruthValue { true(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to true to clear the cncp statistics for this port + priority. Will do nothing if stats are disabled." + ::= { alaQcnPortInstanceEntry 4 } + +alaQcnPICncpReset OBJECT-TYPE + SYNTAX TruthValue { true(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to true to reset the cncp configuration to the global default for + this port priority." + ::= { alaQcnPortInstanceEntry 5 } + +-- ------------------------------------------------------------- +-- Compliance Statements +-- ------------------------------------------------------------- + +alcatelIND1QcnMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for QCN Subsystem." + MODULE -- this module + MANDATORY-GROUPS + { + alaQcnGlobalGroup, + alaQcnPortInstanceGroup + } + ::= { alcatelIND1QcnMIBCompliances 1 } + +-- ------------------------------------------------------------- +-- Units Of Conformance +-- ------------------------------------------------------------- + +alaQcnGlobalGroup OBJECT-GROUP + OBJECTS + { + alaQcnGlobalCNMVlanTag, + alaQcnGlobalCID + } + STATUS current + DESCRIPTION + "Collection of Global QCN Configuration for management of QCN." + ::= { alcatelIND1QcnMIBGroups 1 } + +alaQcnPortInstanceGroup OBJECT-GROUP + OBJECTS + { + alaQcnPIPriorityReset, + alaQcnPICncpStatsClear, + alaQcnPICncpReset + } + STATUS current + DESCRIPTION + "Collection of QCN Port level Configuration for management of QCN." + ::= { alcatelIND1QcnMIBGroups 2 } + +END |