diff options
Diffstat (limited to 'MIBS/omnitron')
| -rw-r--r-- | MIBS/omnitron/OMNITRON-MIB | 3795 | ||||
| -rw-r--r-- | MIBS/omnitron/OMNITRON-POE-MIB | 406 | ||||
| -rw-r--r-- | MIBS/omnitron/OMNITRON-TC-MIB | 873 |
3 files changed, 5074 insertions, 0 deletions
diff --git a/MIBS/omnitron/OMNITRON-MIB b/MIBS/omnitron/OMNITRON-MIB new file mode 100644 index 0000000..6f38804 --- /dev/null +++ b/MIBS/omnitron/OMNITRON-MIB @@ -0,0 +1,3795 @@ +OMNITRON-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Unsigned32, Counter32,
+ Counter64
+ FROM SNMPv2-SMI -- RFC-2578
+ DisplayString, TruthValue, TimeInterval
+ FROM SNMPv2-TC -- RFC-2579
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF -- RFC-2580
+ omnitron, OstVlanId, OstModeType, icAgent, OstPortNumber, OstPortList
+ FROM OMNITRON-TC-MIB;
+
+omnitronMIB MODULE-IDENTITY
+ LAST-UPDATED "201510211200Z" -- October 21, 2015
+ ORGANIZATION "Omnitron Systems Technology, Inc."
+ CONTACT-INFO "Omnitron Systems Technology, Inc.
+ 38 Tesla
+ Irvine, CA 92618-4670
+ USA
+
+ Tel: (949) 250 6510
+ Fax: (949) 250 6514
+ E-mail: info@omnitron-systems.com
+ International: +1 949 250 6510
+
+ Technical Support and Customer Service
+ Tel: (800) 675 8410
+ E-mail: support@omnitron-systems.com
+ International: +1 949 250 6510"
+
+ DESCRIPTION
+ "Omnitron MIB for use with v5.2 iConverter Management Modules
+ and NetOutlook
+
+ Copyright 2015 Omnitron Systems Technology, Inc.
+ All rights reserved
+ "
+
+ REVISION "201510211200Z" -- October 21, 2015
+ DESCRIPTION "Added modHwRev and modPcbRev
+ "
+
+ REVISION "201501191200Z" -- January 19, 2015
+ DESCRIPTION "Initial version of v5.2 MIB.
+ Updated resetmod and modreset to allow reboot from backup
+ "
+ ::= { omnitron 3 }
+
+prodAgent OBJECT IDENTIFIER ::= { omnitron 2 }
+omnitronConformance OBJECT IDENTIFIER ::= { omnitron 4 }
+omnitronProducts OBJECT IDENTIFIER ::= { omnitron 5 }
+
+
+-------------------------------------------------------------------------------
+-- Omnitron Product Object IDs
+-------------------------------------------------------------------------------
+
+managementModule OBJECT IDENTIFIER ::= { omnitronProducts 1 }
+
+
+-------------------------------------------------------------------------------
+-- iConverter Agent Group
+-------------------------------------------------------------------------------
+
+chassis OBJECT-TYPE
+ SYNTAX Integer32 (1..19)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Holds the chassis number of the selected IP"
+ ::= { icAgent 6 }
+
+selfSlot OBJECT-TYPE
+ SYNTAX Integer32 (1..22)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Holds the slot number of the selected IP"
+ ::= { icAgent 8 }
+
+-------------------------------------------------------------------------------
+-- Chassis Table
+-------------------------------------------------------------------------------
+
+chassisTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ChassisEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "This a table of chassis and their modules."
+ ::= { icAgent 1 }
+
+chassisEntry OBJECT-TYPE
+ SYNTAX ChassisEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Chassis modules."
+ INDEX { chassisnum, slotnum }
+ ::= { chassisTable 1 }
+
+ChassisEntry ::= SEQUENCE {
+ chassisnum Integer32,
+ slotnum Integer32,
+ chassistype Integer32,
+ prodtype Integer32,
+ chassisname DisplayString,
+ partnum DisplayString,
+ serialnum DisplayString,
+ manufdate DisplayString,
+ softrev Integer32,
+ prodrev Integer32,
+ ledstat Integer32,
+ switchstat Integer32,
+ extended1 Integer32,
+ extended2 Integer32,
+ extended3 Integer32,
+ extended4 Integer32,
+ extended5 Integer32,
+ extended6 Integer32,
+ resetmod Integer32,
+ wrswitch Integer32,
+ modulename DisplayString
+ }
+
+chassisnum OBJECT-TYPE
+ SYNTAX Integer32 (1..19)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The chassis where the module resides. Ranges in value from 1 - 19."
+ ::= { chassisEntry 1 }
+
+slotnum OBJECT-TYPE
+ SYNTAX Integer32 (1..22)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The slot number of the module.
+ For the 19 slot chassis it ranges in value from 1-22.
+ For the 2 slot chassis it ranges in value from 1-2."
+ ::= { chassisEntry 2 }
+
+chassistype OBJECT-TYPE
+ SYNTAX Integer32 (1..6)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Type of chassis:
+ 1 = 19 module chassis
+ 2 = 2 module chassis
+ 3 = 5 module chassis
+ 4 = 1 module chassis
+ 5 = stand alone chassis
+ 6 = 1-module redundant power chassis"
+ ::= { chassisEntry 3 }
+
+prodtype OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The product type of the module:
+ 61 = iConverter NMM
+ 64 = iConverter Power Supply (19 Module)
+ 65 = iConverter 10FL/T Ethernet
+ 66 = iConverter 100 Fx/Tx Ethernet
+ 67 = iConverter Fiber/Fiber
+ 68 = iConverter 10/100 Ethernet
+ 70 = iConverter 2FXM slave
+ 72 = iConverter GX/X
+ 74 = iConverter Tx/2Tx Ethernet
+ 75 = iConverter Gx Gigabit Ethernet
+ 76 = iConverter Tx/2Fx Ethernet
+ 77 = iConverter T1/E1
+ 79 = iConverter 4Tx Ethernet
+ 80 = iConverter 10/100M
+ 81 = iConverter GX/T Ethernet
+ 82 = iConverter Power Supply (5 Module)
+ 83 = iConverter GX/F Ethernet
+ 84 = iConverter 2FX Ethernet
+ 85 = iConverter 10T/2 Ethernet
+ 86 = iConverter 10/100VT Ethernet
+ 87 = iConverter 4Tx VT
+ 88 = iConverter RS 422/485
+ 89 = iConverter T3/E3
+ 90 = iConverter 10/100M slave
+ 92 = iConverter RS 232
+ 93 = iConverter GX/TM
+ 94 = iConverter GX/TM slave
+ 95 = iConverter 2GXM
+ 96 = iConverter 2FXM
+ 97 = iConverter GM3 2xSFP
+ 98 = iConverter 2GXM slave
+ 99 = iConverter GM3 2xUTP
+ 100= iConverter 10/100M2
+ 101= iConverter 2FXM2
+ 102= iConverter GM3 SFP/2xUTP
+ 103= iConverter 1-Module Redundant Powered Chassis
+ 104= iConverter Gx AN
+ 105= iConverter GX/TM2
+ 106= iConverter 2GX/TM2
+ 107= iConverter 4xT1/E1 Mux
+ 108= iConverter GM3 2xSFP/UTP
+ 109= iConverter GM3 3xSFP
+ 110= iConverter X.21
+ 112= iConverter GM3 3xUTP
+ 113= iConverter GM3 FF/UTP or SFP/UTP
+ 114= iConverter CWDM
+ 115= iConverter XG
+ 117= iConverter TM3
+ 119= iConverter 4GT
+ 120= iConverter GM4 2xSFP/TP
+ 136= iConverter XGT+
+ 137= iConverter GM4 5-Port
+ 142= iConverter GX/T2
+ 143= iConverter GM4-HPoE or GM4-PoE+
+ 253= iConverter GM3 2XSFP
+ 254= iConverter GM3 1xSFP/2xUTP
+ 255= iConverter Unknown"
+ ::= { chassisEntry 4 }
+
+chassisname OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The name of the chassis.
+
+ For the M2 modules the max size is 32 octets.
+
+ For the GM3, GM4, XM5 the max size is 64 octets when a module is
+ accessed directly through the serial port, or via its own IP address
+ for Telnet, SSH, or SNMP.
+
+ For the GM3, GM4, XM5 when the object is indirectly accessed via the
+ backplane, through IP-less, or through 802.3ah peer-to-peer the value
+ is truncated to 32 bytes.
+ "
+ ::= { chassisEntry 5 }
+
+partnum OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The part number of the module."
+ ::= { chassisEntry 6 }
+
+serialnum OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The serial number of the module."
+ ::= { chassisEntry 7 }
+
+manufdate OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The date the module was manufactured in form YYYYMMDD."
+ ::= { chassisEntry 8 }
+
+softrev OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The software revision of the module software."
+ ::= { chassisEntry 9 }
+
+prodrev OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The product revision of the module."
+ ::= { chassisEntry 10 }
+
+ledstat OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of any first 32 LEDs on the module, excluding the power LED.
+ If an LED is missing its number is skipped.
+
+ For an eight LED position device the following is the decoding:
+ ledstat.7 is the top LED position
+ ledstat.6 is the second LED position
+ ledstat.5 is the third LED position
+ ledstat.4 is the fourth LED position
+ ledstat.3 is the fifth LED position
+ ledstat.2 is the sixth LED position
+ ledstat.1 is the seventh LED position
+ ledstat.0 is the eighth and bottom LED position
+
+ For devices that have 32 or less LEDs this object contains all
+ the LEDs. For those devices that have more than 32 LEDs, LEDs 33
+ and above are only covered by the modExpLedStatus object.
+ "
+ ::= { chassisEntry 11 }
+
+switchstat OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The status of any DIP switches on the module.
+ DIP switch 1 is switchstat.0,
+ DIP switch 2 is switchstat.1,
+ DIP switch 3 is switchstat.2, etc.
+
+ DIP switch bank 1 is switches 0-7
+ DIP switch bank 2 is switches 8-15
+
+ Front panel switches start at switchstat.7 for the top switch,
+ switchstat.6 for the next switch, etc."
+ ::= { chassisEntry 12 }
+
+extended1 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "General extended status for the module. Normally this is the
+ actual setting of the DIP switch selection."
+ ::= { chassisEntry 13 }
+
+extended2 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "General extended status for the module"
+ ::= { chassisEntry 14 }
+
+extended3 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "General extended status for the module"
+ ::= { chassisEntry 15 }
+
+extended4 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "General extended status for the module"
+ ::= { chassisEntry 16 }
+
+extended5 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "General extended status for the module"
+ ::= { chassisEntry 17 }
+
+extended6 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "General extended status for the module"
+ ::= { chassisEntry 18 }
+
+resetmod OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Writing to this variable resets the module. This variable is a write only.
+
+ Writing a zero (0) will reboot to the current working application image
+
+ Writing a one (1) will reboot to the backup application image if
+ available
+ "
+ ::= { chassisEntry 19 }
+
+wrswitch OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Writing to this variable updates the module switch settings.
+ See switchstat above for the explanation."
+ ::= { chassisEntry 20 }
+
+modulename OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The name of the module"
+ ::= { chassisEntry 21 }
+
+
+-------------------------------------------------------------------------------
+-- Enhanced iConverter Agent Group
+-------------------------------------------------------------------------------
+
+enhancedchassisTable OBJECT IDENTIFIER ::= { prodAgent 1 }
+
+moduleCount OBJECT-TYPE
+ SYNTAX Integer32 (1..22)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of modules in the chassis table"
+ ::= { enhancedchassisTable 1 }
+
+moduleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ModuleEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "This a table of modules in the enhances chassis table. It contains as many
+ entries as specified by moduleCount"
+ ::= { enhancedchassisTable 2 }
+
+moduleEntry OBJECT-TYPE
+ SYNTAX ModuleEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Chassis modules."
+ INDEX { modchassnum, modslotnum }
+ ::= { moduleTable 1 }
+
+ModuleEntry ::= SEQUENCE {
+ modchassnum Integer32,
+ modslotnum Integer32,
+ modchasstype Integer32,
+ modprodtype Integer32,
+ modsoftrev Integer32,
+ modprodrev Integer32,
+ modreset Integer32,
+ modnumports Integer32,
+ modchassname DisplayString,
+ modpartnum DisplayString,
+ modserialnum DisplayString,
+ modmanufdate DisplayString,
+ modname DisplayString,
+ modportvlan Integer32,
+ modextfeaturebits Integer32,
+ modswbuildnum Integer32,
+ modenable802dot1qProcessing Integer32,
+ modtagsubstitution Integer32,
+ modcommitVLANchanges Integer32,
+ modvlanTableClear Integer32,
+ modcommitNMMCfgChanges Integer32,
+ modLM80volts Integer32,
+ modLM80currents Integer32,
+ modLM80misc Integer32,
+ modRestoreFactoryDefaults Integer32,
+ coreStatusOnly Integer32,
+ ingressPolicingType Integer32,
+ vlanservicetag Integer32,
+ defaultForwardingMap Integer32,
+ modFpgaRev DisplayString,
+ modExpPartNumber DisplayString,
+ modExpSoftwareRev DisplayString,
+ modExpLedStatus OCTET STRING,
+ modHwRev DisplayString,
+ modPcbRev DisplayString
+ }
+
+modchassnum OBJECT-TYPE
+ SYNTAX Integer32 (1..19)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The chassis where the module resides."
+ ::= { moduleEntry 1 }
+
+modslotnum OBJECT-TYPE
+ SYNTAX Integer32 (1..22)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The slot number within a chassis."
+ ::= { moduleEntry 2 }
+
+modchasstype OBJECT-TYPE
+ SYNTAX Integer32 (1..6)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The type of chassis in which the module resides."
+ ::= { moduleEntry 3 }
+
+modprodtype OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The chassis where the module resides."
+ ::= { moduleEntry 4 }
+
+modsoftrev OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The modules software revision."
+ ::= { moduleEntry 5 }
+
+modprodrev OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The modules product revision."
+ ::= { moduleEntry 6 }
+
+modreset OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Writing to this variable resets the module. This variable is a write only.
+
+ Writing a zero (0) will reboot to the current working application image
+
+ Writing a one (1) will reboot to the backup application image if
+ available
+ "
+ ::= { moduleEntry 7 }
+
+modnumports OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The number of ports in this module."
+ ::= { moduleEntry 8 }
+
+modchassname OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name of the chassis in which the individual module resides in.
+
+ For the M2 modules the max size is 32 octets.
+
+ For the GM3, GM4, XM5 the max size is 64 octets when a module is
+ accessed directly through the serial port, or via its own IP address
+ for Telnet, SSH, or SNMP.
+
+ For the GM3, GM4, XM5 when the object is indirectly accessed via the
+ backplane, through IP-less, or through 802.3ah peer-to-peer the value
+ is truncated to 32 bytes.
+ "
+ ::= { moduleEntry 9 }
+
+modpartnum OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The model of the individual module."
+ ::= { moduleEntry 10 }
+
+modserialnum OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The serial number of the individual module."
+ ::= { moduleEntry 11 }
+
+modmanufdate OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The manufacturing date of the individual module."
+ ::= { moduleEntry 12 }
+
+modname OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The name of the individual module."
+ ::= { moduleEntry 13 }
+
+modportvlan OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The portvlan map of an individual module. The low order bits encode the possible values.
+ The following are the connection paths that exists between the ports on the module:
+ Used on types 69, 72, 81, 83, 84, 86
+ bit0 - Port 1 to Port 2
+ bit1 - Port 1 to Backplane Port A
+ bit2 - Port 1 to Backplane Port B
+ bit3 - Port 2 to Backplane Port A
+ bit4 - Port 2 to Backplane Port B
+ bit5 - Backplane Port A to Backplane Port B
+ Used on types 70, 80, 90, 93, 94, 95, 96, 98, 100, 101, 105, 106
+ bit0 - Port 1 to Port 2
+ bit1 - Port 1 to Backplane Port A
+ bit2 - Port 1 to Backplane Port B
+ bit3 - Port 2 to Backplane Port A
+ bit4 - Port 2 to Backplane Port B
+ bit5 - Backplane Port A to Backplane Port B
+ bit6 - Port 1 to Mgt
+ bit7 - Port 2 to Mgt
+ bit8 - Backplane A to Mgt
+ bit9 - Backplane B to Mgt
+ Used on types 102, 108, 109, 112
+ bit0 - Port 1-2-3 interconnect
+ bit1 - Port 1-2-3 to Backplane Port A
+ bit2 - Port 1-2-3 to Backplane Port B
+ bit3 - Backplane Port A to Backplane Port B
+ bit4 - Port 1 to Mgt
+ bit5 - Port 2 to Mgt
+ bit6 - Port 3 to Mgt
+ bit7 - Backplane A to Mgt
+ bit8 - Backplane B to Mgt
+ Used on types 97, 99, 113
+ bit0 - Port 1 to Port 2
+ bit1 - Port 1 to Backplane Port A
+ bit2 - Port 1 to Backplane Port B
+ bit3 - Port 2 to Backplane Port A
+ bit4 - Port 2 to Backplane Port B
+ bit5 - Backplane Port A to Backplane Port B
+ bit6 - Port 1 to Mgt
+ bit7 - Port 2 to Mgt
+ bit8 - Backplane A to Mgt
+ bit9 - Backplane B to Mgt
+ Used on types 79, 87
+ bit0 - Port 1-2-3-4 interconnect
+ bit1 - Port 1-2-3-4 to backplane A
+ bit2 - Port 1-2-3-4 to backplane B
+ bite 3 Backplane A to Backplane B
+ Used on type 103
+ bit0 - Port A to Backplane A
+ bit1 - Port A to Backplane B
+ bit2 - Port B to Backplane A
+ bit3 - Port B to Backplane B
+ bit4 - Port A to Port B"
+ ::= { moduleEntry 14 }
+
+modextfeaturebits OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The module's extended features bits.
+ The bit definitions are:
+ bit0 - module is capable of being field upgradeable
+ bit1 - module supports MIB Statistics
+ bit2 - module supports Memory I/O extended registers
+ bit3 - module supports Tag Vlan feature
+ bit4 - module configured as Secure Slave
+ bit5 - module configured as Secure Proxy
+ bit6 - module configured as Secure Master
+ bit7 - module supports 802.3ah OAM Client
+ bit8 - module supports SFP parameters for port1
+ bit9 - module supports SFP parameters for port2
+ bit10 - module supports SFP parameters for port3
+ bit11 - module supports SFP parameters for port4
+ bit12 - module supports AH event notification
+ bit13 - 1-module redundant power chassis supports contact closure status
+ bit14 - 1-module redundant power chassis supports power over ethernet
+ bit15 - 1-module redundant power chassis RJ45 connector is installed
+ bit16 - 1-module redundant power chassis fan is installed
+ bit17 - when this bit is on the module is a remote slave
+ bit18 - module supports unidirectional on port1
+ bit19 - module supports unidirectional on port2
+ bit20 - module supports unidirectional on port3
+ bit21 - extended power supply
+ bit22 - module supports SNMPv3
+ bit23 - module is NMM2 capable
+ bit24 - fan is installed
+ bit25 - generic module class supports 802.1ag/Y.1731
+ bit26 - module GM3 class supports 802.1ag/Y.1731
+ bit27 - module GM4 class
+ bit28 - port 1 is an XFP port
+ bit29 - port 2 is an XFP port
+ "
+ ::= { moduleEntry 15 }
+
+modswbuildnum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The module's software build number."
+ ::= { moduleEntry 16 }
+
+modenable802dot1qProcessing OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Enables or disables 802_1q processing.
+ 0 = disable
+ 1 = enable"
+ ::= { moduleEntry 17 }
+
+modtagsubstitution OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Enables or disables substitution of 802_1q tags.
+ Currently not implemented
+ by any supported module"
+ ::= { moduleEntry 18 }
+
+modcommitVLANchanges OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "VLAN information is applied to the module and data saved
+ to persistent storage. This variable is a write only."
+ ::= { moduleEntry 19 }
+
+modvlanTableClear OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "VLAN table for the module Vlan table to be cleared. This variable is a write only."
+ ::= { moduleEntry 20 }
+
+modcommitNMMCfgChanges OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Management module configuration information is applied to the module and data saved
+ to persistent storage. This variable is a write only."
+ ::= { moduleEntry 21 }
+
+modLM80volts OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "8 bits each of PS1 Voltage(msB), PS2 Voltage, Total Voltage and an unused byte(lsB).
+ 1-module redundant power chassis."
+ ::= { moduleEntry 22 }
+
+modLM80currents OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "8 bits each of PS1 Current(msB) (mA/10), PS2 Current, Total Current and an
+ unused byte(lsB). 1-module redundant power chassis."
+ ::= { moduleEntry 23 }
+
+modLM80misc OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "8 bits each of Temperature(msB) .5C/bit and 2 unused byte(lsB). 1-module redundant power chassis."
+ ::= { moduleEntry 24 }
+
+modRestoreFactoryDefaults OBJECT-TYPE
+ SYNTAX Integer32 (0..6)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management module configuration information is restored to factory
+ defaults. This variable is a write only. Different types of restore
+ defaults are supported:
+
+ restoreFactoryDefaults(0,1) Restores factory defaults
+ restoreLocalDefaults(2) Restores defaults from local file
+ restorePreviousConfig(3) Restores the previously saved
+ configuration. This is useful to regress
+ to a known working setup.
+ restoreFactoryDefaultsKeepIp(4) Restores factory defaults but keeps IP
+ based settings
+ restoreLocalDefaultsKeepIp(5) Restores defaults from local file but
+ keeps IP based settings.
+ restorePreviousConfigKeepIp(6) Restores the previously saved
+ configuration but keeps IP based
+ settings.
+ "
+ ::= { moduleEntry 25 }
+
+coreStatusOnly OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable(1) or disable(0) Core Status Only."
+ DEFVAL {0}
+ ::= { moduleEntry 26 }
+
+ingressPolicingType OBJECT-TYPE
+ SYNTAX Integer32(1..3)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the module global policy used to count bytes for bandwidth
+ calculation purposes. This is available on the GM3 & GM4. This is
+ not available on the XM5.
+
+ 1 = L1 includes all bytes in frame, interframe gap and preamble
+ 2 = L2 includes all bytes in frame, including Layer 2 header and CRC
+ 3 = L3 includes Layer 3 information only, excludes Layer 2 header and CRC
+ "
+ ::= { moduleEntry 27 }
+
+vlanservicetag OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Value for service tag."
+ ::= { moduleEntry 28 }
+
+defaultForwardingMap OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Bit vector for default forwarding map where:
+ bit0 - Port 1
+ bit1 - Port 2
+ bit2 - Port 3
+ bit3 - Port 4
+ bit4 - Port BPA
+ bit5 - Port BPB"
+ ::= { moduleEntry 29 }
+
+modFpgaRev OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current revision of the FPGA."
+ ::= { moduleEntry 30 }
+
+modExpPartNumber OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The expanded part number of the individual module.
+
+ The modpartnum object indicates the compressed version of the
+ part number name. If this field is not supported in a module it is
+ left as a null length string.
+ "
+ ::= { moduleEntry 31 }
+
+modExpSoftwareRev OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The expanded software revision of the individual module.
+
+ This object allows for an enhanced version of the software revision
+ that include a major and minor component. Major and Minor are always
+ numeric values while the rev value can be a number or an alpha. For
+ instance: 1.0, 1.1, 3.2A, 1.1.2.
+
+ The two digit modsoftrev object includes the major and minor revision.
+ A modsoftrev of '32' would be shown in this object as '3.2'. This object
+ allows the minor number to be expanded beyond a single digit as shown
+ above by '3.2A' above, even though modsoftrev would be '32'.
+
+
+ The modswbuildnum is independent of this scheme, but the complete
+ revision is sometimes referred together as a concatenated value. For
+ instance is '3.2A' is the sofware rev and '1234' is the build number, the
+ concatenated value is '3.2A.1234'.
+ "
+ ::= { moduleEntry 32 }
+
+
+modExpLedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object is the expanded LED status of the individual module. This
+ object reflects the state, color, and blinking rate of each individual
+ LED.
+
+ Each LED is represented by a single octet. The first octet in the
+ string is the first LED, the second octet in the string is the
+ second LED, until the last LED. The length of the object indicates
+ the number of LEDs of the modules. Non-installed (missing) LEDs return
+ a value of all zeros.
+
+ Each octet is encoded in the following way:
+
+ Bits 0:1 indicate the LED color and state
+ 0x0 = LED is off
+ 0x1 = LED is amber
+ 0x2 = LED is green
+ 0x3 = LED is both amber and green (red)
+
+ Bits 2:4 indicate the LED blinking frequency
+ 0x0 = LED is solid
+ 0x1 = LED is blinking at 10 Hz
+ 0x2 = LED is blinking at 5 Hz
+ 0x3 = LED is blinking at 2 Hz
+ 0x4 = LED is blinking at 1 Hz
+ 0x5 = LED is blinking at 1/2 Hz
+
+ Bits 5:7 are currently undefined and return 0x0 for this product
+ revision.
+ "
+ ::= { moduleEntry 33 }
+
+modHwRev OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current hardware revision of the module."
+ ::= { moduleEntry 34 }
+
+modPcbRev OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current PCB revision of the module."
+ ::= { moduleEntry 35 }
+
+
+-------------------------------------------------------------------------------
+-- Management Module Configuration Variables Table
+-------------------------------------------------------------------------------
+
+moduleMgtCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ModuleMgtCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "This is a table of the management module configuration variables."
+ ::= { enhancedchassisTable 3 }
+
+moduleMgtCfgEntry OBJECT-TYPE
+ SYNTAX ModuleMgtCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Chassis modules."
+ INDEX { modchassnum, modslotnum }
+ ::= { moduleMgtCfgTable 1 }
+
+ModuleMgtCfgEntry ::= SEQUENCE {
+ sysAdminStatus Integer32,
+ sysDateTime DisplayString,
+ macAddr DisplayString,
+ ipAddr IpAddress,
+ subnetmask IpAddress,
+ gateway IpAddress,
+ readCommunity DisplayString,
+ writeCommunity DisplayString,
+ mychassnum Integer32,
+ mmname DisplayString,
+ traphost1 IpAddress,
+ traphost2 IpAddress,
+ traphost3 IpAddress,
+ traphost4 IpAddress,
+ traphost5 IpAddress,
+ traphost6 IpAddress,
+ traphost7 IpAddress,
+ traphost8 IpAddress,
+ sysloc DisplayString,
+ syscon DisplayString,
+ serialpass DisplayString,
+ telnetpass DisplayString,
+ ftppasswrd DisplayString,
+ keepAliveInterval Integer32,
+ vlanIdOst OstVlanId,
+ nmmCfgSerialBaudrate Integer32,
+ enabledFunctions Integer32,
+ enableSNMPFunction Integer32,
+ nmmCfgState Integer32,
+ nmmSecureMode Integer32,
+ nmmSecureConnState Integer32,
+ nmmIpProtocolState Integer32,
+ nmmIpDisabled Integer32,
+ vlanPri Integer32,
+ enableSNMPWrites Integer32,
+ cpuVoltageIn Integer32,
+ cpuVoltageOut Integer32,
+ cpuTemperature Integer32,
+ nmmSecureSlaveSlot Integer32,
+ dhcpIpAddr IpAddress,
+ dhcpSubnetmask IpAddress,
+ dhcpGateway IpAddress,
+ nmmOAMmgmtMode Integer32,
+ customertag Integer32,
+ servicetag Integer32,
+ cnodeControl Integer32,
+ cnodeCIR Integer32,
+ enableSNMPv3Function Integer32,
+ slaveWrite Integer32,
+ snmpTrapType Integer32,
+ capsMask Unsigned32,
+ slaveTraps Integer32,
+ slaveTrapsForward Integer32,
+ ipAddr2 IpAddress,
+ subnetmask2 IpAddress,
+ gateway2 IpAddress,
+ ipaddrEVCassociation DisplayString,
+ ipaddr2EVCassociation DisplayString,
+ bootpEnable TruthValue,
+ tftpEnable TruthValue,
+ tftpServerIpAddress IpAddress,
+ dhcptftpServerIpAddress IpAddress,
+ tftpFileName DisplayString,
+ modeType OstModeType,
+ dhcpPortNumber Integer32,
+ dhcpTagVid OstVlanId,
+ trapSrcIpSelect Unsigned32,
+ muxGroupDefaults TruthValue,
+ portFwdCpu INTEGER,
+ portFwdCpuList OstPortList
+ }
+
+sysAdminStatus OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This variable provides the status for a management module's ability to make
+ changes to the system. In backplane slave, a management module cannot make
+ system modification. Modifications must be performed from a management
+ module acting as a backplane master.
+
+ 0 = read only (can only view configuration settings)
+ 1 = read-write (can view and modify configuration settings)."
+ ::= { moduleMgtCfgEntry 1 }
+
+sysDateTime OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(19))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable provides the date and time in display format:
+ nn/dd/yyyy hh:mm:ss
+ where nn = 2 digit month, dd = 2 digit day, yyyy = 4 digit year
+ hh - 2 digit hour 0-23, mm = 2 digit minutes 0-59, ss = 2 digit secs 0-59"
+ ::= { moduleMgtCfgEntry 2 }
+
+macAddr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "MAC address of the management module"
+ ::= { moduleMgtCfgEntry 3 }
+
+ipAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "IP of the management module"
+ ::= { moduleMgtCfgEntry 4 }
+
+subnetmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "subnetmask for the management module"
+ ::= { moduleMgtCfgEntry 5 }
+
+gateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "IP address for the gateway the management module will use."
+ ::= { moduleMgtCfgEntry 6 }
+
+readCommunity OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "SNMP read community name."
+ ::= { moduleMgtCfgEntry 7 }
+
+writeCommunity OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "SNMP set community name."
+ ::= { moduleMgtCfgEntry 8 }
+
+mychassnum OBJECT-TYPE
+ SYNTAX Integer32 (1..19)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs chassis number."
+ ::= { moduleMgtCfgEntry 9 }
+
+mmname OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management Modules chassis name.
+
+ For the M2 modules the max size is 32 octets.
+
+ For the GM3, GM4, XM5 the max size is 64 octets when a module is
+ accessed directly through the serial port, or via its own IP address
+ for Telnet, SSH, or SNMP.
+
+ For the GM3, GM4, XM5 when the object is indirectly accessed via the
+ backplane, through IP-less, or through 802.3ah peer-to-peer the value
+ is truncated to 32 bytes.
+ "
+ ::= { moduleMgtCfgEntry 10 }
+
+traphost1 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs traphost1 IP address."
+ ::= { moduleMgtCfgEntry 11 }
+
+traphost2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs traphost2 IP address."
+ ::= { moduleMgtCfgEntry 12 }
+
+traphost3 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs traphost3 IP address."
+ ::= { moduleMgtCfgEntry 13 }
+
+traphost4 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs traphost4 IP address."
+ ::= { moduleMgtCfgEntry 14 }
+
+traphost5 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs traphost5 IP address."
+ ::= { moduleMgtCfgEntry 15 }
+
+traphost6 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs traphost6 IP address."
+ ::= { moduleMgtCfgEntry 16 }
+
+traphost7 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs traphost7 IP address."
+ ::= { moduleMgtCfgEntry 17 }
+
+traphost8 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs traphost8 IP address."
+ ::= { moduleMgtCfgEntry 18 }
+
+sysloc OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management Modules system location.
+
+ For the M2 modules the max size is 32 octets.
+
+ For the GM3, GM4, XM5 the max size is 64 octets when a module is
+ accessed directly through the serial port, or via its own IP address
+ for Telnet, SSH, or SNMP.
+
+ For the GM3, GM4, XM5 when the object is indirectly accessed via the
+ backplane, through IP-less, or through 802.3ah peer-to-peer the value
+ is truncated to 32 bytes.
+ "
+ ::= { moduleMgtCfgEntry 19 }
+
+syscon OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management Modules system Contact information.
+
+ For the M2 modules the max size is 32 octets.
+
+ For the GM3, GM4, XM5 the max size is 64 octets when a module is
+ accessed directly through the serial port, or via its own IP address
+ for Telnet, SSH, or SNMP.
+
+ For the GM3, GM4, XM5 when the object is indirectly accessed via the
+ backplane, through IP-less, or through 802.3ah peer-to-peer the value
+ is truncated to 32 bytes.
+ "
+ ::= { moduleMgtCfgEntry 20 }
+
+serialpass OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs serial interface password."
+ ::= { moduleMgtCfgEntry 21 }
+
+telnetpass OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs telnet interface password."
+ ::= { moduleMgtCfgEntry 22 }
+
+ftppasswrd OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "NMMs ftp password."
+ ::= { moduleMgtCfgEntry 23 }
+
+keepAliveInterval OBJECT-TYPE
+ SYNTAX Integer32 (10..600)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This the interval used by the NMM to send out keep alive traps."
+ ::= { moduleMgtCfgEntry 24 }
+
+vlanIdOst OBJECT-TYPE
+ SYNTAX OstVlanId
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Management module VLAN tagged packet ID."
+ ::= { moduleMgtCfgEntry 25 }
+
+nmmCfgSerialBaudrate OBJECT-TYPE
+ SYNTAX Integer32 (1..9)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines the baud rate for the serial interface to the NMM.
+ Where:
+ 1 = 300 bps
+ 2 = 1200 bps
+ 3 = 2400 bps
+ 4 = 4800 bps
+ 5 = 9600 bps
+ 6 = 19200 bps
+ 7 = 38400 bps
+ 8 = 57600 bps
+ 9 = 115200 bps"
+ ::= { moduleMgtCfgEntry 26 }
+
+enabledFunctions OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines which special functions are enabled at the NMM.
+ Where:
+ 0x01 = Keep Alive trap enabled
+ 0x02 = Telnet enabled
+ 0x04 = FTP enabled
+ 0x08 = switch reload enabled
+ 0x10 = VLAN enabled
+ 0x20 = sw1 block enabled
+ 0x40 = DHCP client enabled
+ 0x80 = Trap 99 processing enabled"
+ ::= { moduleMgtCfgEntry 27 }
+
+enableSNMPFunction OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines whether the SNMP Agent is enabled at the NMM.
+ Where:
+ 00 = SNMP disabled
+ 01 = SNMP enabled"
+ ::= { moduleMgtCfgEntry 28 }
+
+nmmCfgState OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This variable defines the state of the configuration changes made to the NMM.
+ Where:
+ 0x00 = No changes
+ 0x02 = Changes Pending (not saved in Flash)
+ 0x04 = Saved in Flash, Pending NMM reboot"
+ ::= { moduleMgtCfgEntry 29 }
+
+nmmSecureMode OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines the mode the Management module will operate in when configured for SECURE COMMUNICATIONS.
+ Where:
+ 0x00 = No Secure Communications
+ 0x01 = Secure Proxy
+ 0x02 = Secure Slave
+ 0x03 = Secure Master"
+ ::= { moduleMgtCfgEntry 30 }
+
+nmmSecureConnState OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This variable returns the secure connection state between the proxy and secure slave.
+ Where:
+ 0x00 = Not connected
+ 0x01 = Connection Pending
+ 0x02 = Connection established
+ 0x03 = Connection terminating"
+ ::= { moduleMgtCfgEntry 31 }
+
+nmmIpProtocolState OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This variable defines whether the IP protocol is active or disabled.
+ 0 = Active
+ 1 = Disabled"
+ ::= { moduleMgtCfgEntry 32 }
+
+nmmIpDisabled OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines the configuration value for IP protocol's desired state.
+ 0 = ipActive
+ 1 = ipDisabled"
+ ::= { moduleMgtCfgEntry 33 }
+
+vlanPri OBJECT-TYPE
+ SYNTAX Integer32 (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Management module VLAN tagged packet priority."
+ ::= { moduleMgtCfgEntry 34 }
+
+enableSNMPWrites OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Permit SNMP SET operations."
+ ::= { moduleMgtCfgEntry 35 }
+
+cpuVoltageIn OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "voltage input to cpu."
+ ::= { moduleMgtCfgEntry 36 }
+
+cpuVoltageOut OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Voltage out from the cpu."
+ ::= { moduleMgtCfgEntry 37 }
+
+cpuTemperature OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The ambient temperature of the CPU."
+ ::= { moduleMgtCfgEntry 38 }
+
+nmmSecureSlaveSlot OBJECT-TYPE
+ SYNTAX Integer32 (0..19)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The slot number of the secure slave in the remote chassis when configured for SECURE COMMUNICATIONS."
+ ::= { moduleMgtCfgEntry 39 }
+
+dhcpIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "IP of the management module as assigned by a DHCP server"
+ ::= { moduleMgtCfgEntry 40 }
+
+dhcpSubnetmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "subnetmask of the management module as assigned by a DHCP server"
+ ::= { moduleMgtCfgEntry 41 }
+
+dhcpGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Gateway IP address of the management module as assigned by a DHCP Server"
+ ::= { moduleMgtCfgEntry 42 }
+
+nmmOAMmgmtMode OBJECT-TYPE
+ SYNTAX Integer32 (1..5)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable configures the protocol the Management module will use to communicate
+ with remote chassis when operating in secure mode.
+ Where:
+ 0x01 = (OAM_OFF) No Secure Communications protocol
+ 0x02 = (Auto SECURE_OAM) Use OST proprietary protocol, force remote to switch if not in the OAM_OFF mode
+ 0x03 = (Auto AH_OAM) Use AH protocol, force remote to switch if not in the OAM_OFF mode
+ 0x04 = (SECURE_OAM) Use OST proprietary protocol, remote is not forced to switch and must match modes to connect
+ 0x05 = (AH_OAM) Use AH protocol, remote is not forced to switch and must match modes to connect"
+ ::= { moduleMgtCfgEntry 43 }
+
+customertag OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Value for customer tag."
+ ::= { moduleMgtCfgEntry 44 }
+
+servicetag OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Value for service tag."
+ ::= { moduleMgtCfgEntry 45 }
+
+cnodeControl OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Controls whether the module is operating as a Cnode."
+ ::= { moduleMgtCfgEntry 46 }
+
+cnodeCIR OBJECT-TYPE
+ SYNTAX Integer32 (1..3)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Cnode CIR
+ Where: 1 = 64 Kbps
+ 2 = 128 Kbps
+ 3 = 192 Kbps"
+ ::= { moduleMgtCfgEntry 47 }
+
+enableSNMPv3Function OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines whether the SNMPv3 Agent is enabled at the NMM.
+ Where:
+ 00 = SNMP disabled
+ 01 = SNMP enabled"
+ ::= { moduleMgtCfgEntry 48 }
+
+slaveWrite OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines whether the module should be allowed to make
+ configurations to itself when in the chassis slave mode.
+ Where:
+ 00 = slaveWrite disabled
+ 01 = slaveWrite enabled"
+ ::= { moduleMgtCfgEntry 49 }
+
+snmpTrapType OBJECT-TYPE
+ SYNTAX Integer32 (1..3)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines which version of SNMP traps are supported, where:
+ 1 = SNMPv1 traps
+ 2 = SNMPv2c traps
+ 3 = SNMPv3 traps"
+ ::= { moduleMgtCfgEntry 50 }
+
+capsMask OBJECT-TYPE
+ SYNTAX Unsigned32 (0..4294967295)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Capablility bits for this management module."
+ ::= { moduleMgtCfgEntry 51 }
+
+slaveTraps OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines whether the module should be allowed to
+ transmit traps out ethernet ports eventhough it is not a chassis master.
+ Where:
+ 00 = slaveTraps disabled
+ 01 = slaveTraps enabled"
+ ::= { moduleMgtCfgEntry 52 }
+
+slaveTrapsForward OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This variable defines whether the module should be allowed to
+ forward traps to the chassis master when module is a chassis slave. Default is forward.
+ Where:
+ 00 = slaveTrapsForward disabled
+ 01 = slaveTrapsForward enabled"
+ ::= { moduleMgtCfgEntry 53 }
+
+ipAddr2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "IP 2 of the management module"
+ ::= { moduleMgtCfgEntry 54 }
+
+subnetmask2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "subnetmask 2 for the management module"
+ ::= { moduleMgtCfgEntry 55}
+
+gateway2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "IP address for the gateway 2 the management module will use."
+ ::= { moduleMgtCfgEntry 56 }
+
+ipaddrEVCassociation OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..45))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "*** This object is deprecated ***
+
+ EVC associated with ipaddr 1.
+ "
+ ::= { moduleMgtCfgEntry 57 }
+
+ipaddr2EVCassociation OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..45))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "*** This object is deprecated ***
+
+ EVC associated with ipaddr 2.
+ "
+ ::= { moduleMgtCfgEntry 58 }
+
+bootpEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Enable or disable BOOTP."
+ DEFVAL {2}
+ ::= { moduleMgtCfgEntry 59 }
+
+tftpEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Enable or disable TFTP."
+ DEFVAL {2}
+ ::= { moduleMgtCfgEntry 60 }
+
+tftpServerIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "TFTP server IP address."
+ ::= { moduleMgtCfgEntry 61 }
+
+dhcptftpServerIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "TFTP Server IP address as assigned by a DHCP Server"
+ ::= { moduleMgtCfgEntry 62 }
+
+tftpFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..23))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Selects the TFTP file name."
+ ::= { moduleMgtCfgEntry 63 }
+
+modeType OBJECT-TYPE
+ SYNTAX OstModeType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Sets the module Mode Type to normal, AP, or SP."
+ ::= { moduleMgtCfgEntry 64 }
+
+dhcpPortNumber OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the DHCP port number.
+ 2 port module: 1=None, 2=Port 1, 3=Port 2, 4=BP A, 5=BP B
+ 3 port module: 1=None, 2=Port 1, 3=Port 2, 4=Port 3, 5=BP A, 6=BP B
+ 5 ports and higher modules: 1=None, 2..n+1 = Port 1..n
+ "
+ ::= { moduleMgtCfgEntry 65 }
+
+dhcpTagVid OBJECT-TYPE
+ SYNTAX OstVlanId
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Sets the DHCP Tag VLAN ID."
+ ::= { moduleMgtCfgEntry 66 }
+
+trapSrcIpSelect OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Selects the trap source address, IP1(1) or IP2(2)."
+ ::= { moduleMgtCfgEntry 67 }
+
+muxGroupDefaults OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object when written sets the Mux Grouping defaults for a management
+ module. When read the value always returns 'false'.
+
+ Writing this sets the Mux Group EVC and bandwidth profile configurations.
+ "
+ ::= { moduleMgtCfgEntry 68 }
+
+portFwdCpu OBJECT-TYPE
+ SYNTAX INTEGER {
+ all (0),
+ port1 (1),
+ port2 (2),
+ backplaneA (3),
+ backplaneB (4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object enables forwarding of managment traffic from the selected
+ ports only for M2 modules only. Management traffic from ports not defined
+ is dropped.
+
+ all(0) Management traffic forwarded from all ports
+ port1(1) Management traffic forwarded from Port 1 only
+ port2(2) Management traffic forwarded from Port 2 only
+ backplaneA(3) Management traffic forwarded from BP A only
+ backplaneB(4) Management traffic forwarded from BP B only
+ "
+ DEFVAL { all }
+ ::= { moduleMgtCfgEntry 69 }
+
+portFwdCpuList OBJECT-TYPE
+ SYNTAX OstPortList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object enables forwarding of managment traffic from the selected
+ ports only for M3, M4, and M5 modules only. Management traffic from
+ ports not defined is dropped.
+ "
+ DEFVAL { "all" }
+ ::= { moduleMgtCfgEntry 70 }
+
+
+-------------------------------------------------------------------------------
+-- Port Table - may have more than one per module
+-------------------------------------------------------------------------------
+
+modulePortsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ModulePortsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "This a table of Ports per module. There are as many entries as
+ specified by modnumports in the moduleEntry"
+ ::= { enhancedchassisTable 4 }
+
+modulePortsEntry OBJECT-TYPE
+ SYNTAX ModulePortsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Ports per module table."
+ INDEX { modchassnum, modslotnum, portnum }
+ ::= { modulePortsTable 1 }
+
+ModulePortsEntry ::= SEQUENCE {
+ portnum OstPortNumber,
+ portState INTEGER,
+ portEgressRate Integer32,
+ portpriority Integer32,
+ portcanonicalformatIndicator Integer32,
+ portvlanidentifier Integer32,
+ portmlistcriteria Integer32,
+ portingresssecurity Integer32,
+ portegresspolicy Integer32,
+ portIngressRate Integer32,
+ portSpeed Integer32,
+ portUnidirectionalAhOamEnable Integer32,
+ portIngressRateDropOrPause Integer32,
+ portIngressRateCBS Integer32,
+ portL2CPmgntProcessing Integer32,
+ portEgressQosPolicy Integer32,
+ portAccessType Integer32,
+ portStatsClear Integer32,
+ portLinkState Integer32,
+ portDuplex INTEGER,
+ portMacAddress DisplayString
+ }
+
+portnum OBJECT-TYPE
+ SYNTAX OstPortNumber
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Used to get or set state of port."
+ ::= { modulePortsEntry 1 }
+
+portState OBJECT-TYPE
+ SYNTAX INTEGER {
+ undefined (0),
+ disabled (1),
+ enabled (2),
+ unused (3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set state of port."
+ ::= { modulePortsEntry 2 }
+
+portEgressRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the port throughput limit selection.
+ The following are the limits are enforced by module type:
+ Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7)
+ where:
+ 0 = 100 Mbps
+ 1 = 128 kbps
+ 2 = 256 kbps
+ 3 = 512 kbps
+ 4 = 1 Mbps
+ 5 = 2 Mbps
+ 6 = 4 Mbps
+ 7 = 8 Mbps
+ Used on types 100, 101 (lower limit=1, upper limit=20)
+ where:
+ 1 = 64 kbps
+ 2 = 128 kbps
+ 3 = 256 kbps
+ 4 = 512 kbps
+ 5 = 768 kbps
+ 6 = 1 Mbps
+ 7 = 2 Mbps
+ 8 = 3 Mbps
+ 9 = 4 Mbps
+ 10 = 5 Mbps
+ 11 = 6 Mbps
+ 12 = 7 Mbps
+ 13 = 8 Mbps
+ 14 = 9 Mbps
+ 15 = 10 Mbps
+ 16 = 20 Mbps
+ 17 = 30 Mbps
+ 18 = 40 Mbps
+ 19 = 50 Mbps
+ 20 = 100 Mbps
+ Used on types 105, 106 (lower limit=1, upper limit=33)
+ 1 = 64 kbps
+ 2 = 128 kbps
+ 3 = 256 kbps
+ 4 = 512 kbps
+ 5 = 768 kbps
+ 6 = 1 Mbps
+ 7 = 2 Mbps
+ 8 = 3 Mbps
+ 9 = 4 Mbps
+ 10 = 5 Mbps
+ 11 = 6 Mbps
+ 12 = 7 Mbps
+ 13 = 8 Mbps
+ 14 = 9 Mbps
+ 15 = 10 Mbps
+ 16 = 20 Mbps
+ 17 = 30 Mbps
+ 18 = 40 Mbps
+ 19 = 50 Mbps
+ 20 = 60 Mbps
+ 21 = 70 Mbps
+ 22 = 80 Mbps
+ 23 = 90 Mbps
+ 24 = 100 Mbps
+ 25 = 200 Mbps
+ 26 = 300 Mbps
+ 27 = 400 Mbps
+ 28 = 500 Mbps
+ 29 = 600 Mbps
+ 30 = 700 Mbps
+ 31 = 800 Mbps
+ 32 = 900 Mbps
+ 33 = 1000 Mbps
+ Types 97, 99, 102, 108, 109, 112, 113 use numeric values in kpbs
+ with a lower limit of 64 and an upper limit of 1,000,000.
+ Types not listed have no limit."
+ ::= { modulePortsEntry 3 }
+
+portpriority OBJECT-TYPE
+ SYNTAX Integer32 (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set port user-priority."
+ ::= { modulePortsEntry 4 }
+
+portcanonicalformatIndicator OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set port cfi. Currently not used and defaulted to 0"
+ ::= { modulePortsEntry 5 }
+
+portvlanidentifier OBJECT-TYPE
+ SYNTAX Integer32 (0..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set port VID."
+ ::= { modulePortsEntry 6 }
+
+portmlistcriteria OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set port membership criteria."
+ ::= { modulePortsEntry 7 }
+
+portingresssecurity OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set port ingress security."
+ ::= { modulePortsEntry 8 }
+
+portegresspolicy OBJECT-TYPE
+ SYNTAX Integer32 (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set port egress policy."
+ ::= { modulePortsEntry 9 }
+
+portIngressRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the port throughput limit selection.
+ The following are the limits are enforced by module type:
+ Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7)
+ where:
+ 0 = 100 Mbps
+ 1 = 128 kbps
+ 2 = 256 kbps
+ 3 = 512 kbps
+ 4 = 1 Mbps
+ 5 = 2 Mbps
+ 6 = 4 Mbps
+ 7 = 8 Mbps
+ Used on types 100, 101 (lower limit=64, upper limit=100,000)
+ Values are number of kbps per second, i.e. rate = value x 1000, units in bps
+ Used on types 97, 99, 102, 105, 106, 108, 109, 112, 113 (lower limit=64, upper limit=1,000,000)
+ Values are number of kbps per second, i.e. rate = value x 1000, units in bps
+ Types not listed have no limit."
+ ::= { modulePortsEntry 10 }
+
+portSpeed OBJECT-TYPE
+ SYNTAX Integer32 (0..4)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get the port speed.
+ 0 = undefined
+ 1 = speed10Mbps
+ 2 = speed100Mbps
+ 3 = speed1Gbps
+ 4 = speed10Gbps"
+ ::= { modulePortsEntry 11 }
+
+portUnidirectionalAhOamEnable OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get/set the unidirectional support.
+ 0 = uniDisabled
+ 1 = uniEnabled"
+ ::= { modulePortsEntry 12 }
+
+portIngressRateDropOrPause OBJECT-TYPE
+ SYNTAX Integer32 (0..2)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get/set behavior on overflow.
+ 0 = undefined
+ 1 = inDrop
+ 2 = inPause"
+ ::= { modulePortsEntry 13 }
+
+portIngressRateCBS OBJECT-TYPE
+ SYNTAX Integer32 (5..256000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the port throughput limit selection."
+ ::= { modulePortsEntry 14 }
+
+portL2CPmgntProcessing OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the port L2Cp processing method.
+ 0 = undefined
+ 1 = inDrop
+ 2 = inForward
+ 3 = inTunnel"
+ ::= { modulePortsEntry 15 }
+
+portEgressQosPolicy OBJECT-TYPE
+ SYNTAX Integer32 (0..2)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the port egress QoS Policy.
+ 0 = undefined
+ 1 = fairWeight
+ 2 = starving"
+ ::= { modulePortsEntry 16 }
+
+portAccessType OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the port access type.
+ 0 = undefined
+ 1 = tunnel
+ 2 = access
+ 3 = trunk"
+ ::= { modulePortsEntry 17 }
+
+portStatsClear OBJECT-TYPE
+ SYNTAX Integer32(0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to clear the statistics table for this port"
+ ::= { modulePortsEntry 18 }
+
+portLinkState OBJECT-TYPE
+ SYNTAX Integer32(0..1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Reports the link state of the port.
+ 0 = No link
+ 1 = Linked"
+ ::= { modulePortsEntry 19 }
+
+portDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ undefined (0),
+ halfDuplex (1),
+ fullDuplex (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The object indcates the linked port duplex mode.
+
+ undefined(0) Port is not linked or state of duplex is unknown
+ halfDuplex(1) Port is linked at half duplex
+ fullDuplex(2) Port is linked at full duplex
+ "
+ ::= { modulePortsEntry 20 }
+
+portMacAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "MAC address of the port. If a MAC address doesn't exist on a
+ port the value returned is all zeros."
+ ::= { modulePortsEntry 21 }
+
+
+-------------------------------------------------------------------------------
+-- Statistics Table
+-------------------------------------------------------------------------------
+
+portStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PortStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "This a table of Statistics per port."
+ ::= { enhancedchassisTable 5 }
+
+portStatsEntry OBJECT-TYPE
+ SYNTAX PortStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "extended module statitical information."
+ INDEX { modchassnum, modslotnum, portnum }
+ ::= { portStatsTable 1 }
+
+PortStatsEntry ::= SEQUENCE {
+ txOctets Counter32,
+ txDropPkts Counter32,
+ txBroadcastPkts Counter32,
+ txMulticastPkts Counter32,
+ txUnicastPkts Counter32,
+ txGoodPkts Counter32,
+ txErrorPkts Counter32,
+ txPausePkts Counter32,
+ txCollisions Counter32,
+ txSingleCollision Counter32,
+ txMultipleCollision Counter32,
+ txDeferedTransmit Counter32,
+ txLateCollision Counter32,
+ txExcessiveCollision Counter32,
+ txDroppedEvents Counter32,
+ rxOctets Counter32,
+ rxDropPkts Counter32,
+ rxBroadcastPkts Counter32,
+ rxMulticastPkts Counter32,
+ rxUnicastPkts Counter32,
+ rxGoodPkts Counter32,
+ rxTotalPkts Counter32,
+ rxErrorPkts Counter32,
+ rxPausePkts Counter32,
+ rxUndersizePkts Counter32,
+ rxOversizePkts Counter32,
+ rxFragments Counter32,
+ rxJabbers Counter32,
+ rxAlignmentErrors Counter32,
+ rxFCSErrors Counter32,
+ rxSymbolErrors Counter32,
+ rxCRCAlignErrors Counter32,
+ rxPackets64 Counter32,
+ rxPackets65to127 Counter32,
+ rxPackets128to255 Counter32,
+ rxPackets256to511 Counter32,
+ rxPackets512to1023 Counter32,
+ rxPackets1024to1518 Counter32,
+ txOctets64 Counter64,
+ rxOctets64 Counter64
+ }
+
+txOctets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 1 }
+
+txDropPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 2 }
+
+txBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 3 }
+
+txMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 4 }
+
+txUnicastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 5 }
+
+txGoodPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 6 }
+
+txErrorPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 7 }
+
+txPausePkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 8 }
+
+txCollisions OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 9 }
+
+txSingleCollision OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 10 }
+
+txMultipleCollision OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 11 }
+
+txDeferedTransmit OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 12 }
+
+txLateCollision OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 13 }
+
+txExcessiveCollision OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 14 }
+
+txDroppedEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 15 }
+
+rxOctets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 16 }
+
+rxDropPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 17 }
+
+rxBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 18 }
+
+rxMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 19 }
+
+rxUnicastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 20 }
+
+rxGoodPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 21 }
+
+rxTotalPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 22 }
+
+rxErrorPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 23 }
+
+rxPausePkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 24 }
+
+rxUndersizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 25 }
+
+rxOversizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 26 }
+
+rxFragments OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 27 }
+
+rxJabbers OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 28 }
+
+rxAlignmentErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 29 }
+
+rxFCSErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 30 }
+
+rxSymbolErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 31 }
+
+rxCRCAlignErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - Object name explains its usage."
+ ::= { portStatsEntry 32 }
+
+rxPackets64 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - packets of octet count in object name."
+ ::= { portStatsEntry 33 }
+
+rxPackets65to127 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - packets of octet count in object name."
+ ::= { portStatsEntry 34 }
+
+rxPackets128to255 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - packets of octet count in object name."
+ ::= { portStatsEntry 35 }
+
+rxPackets256to511 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - packets of octet count in object name."
+ ::= { portStatsEntry 36 }
+
+rxPackets512to1023 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - packets of octet count in object name."
+ ::= { portStatsEntry 37 }
+
+rxPackets1024to1518 OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Statistics counter - packets of octet count in object name."
+ ::= { portStatsEntry 38 }
+
+txOctets64 OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "64 bit octet transmission counter."
+ ::= { portStatsEntry 39 }
+
+rxOctets64 OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "64 bit octet receive counter."
+ ::= { portStatsEntry 40 }
+
+
+-------------------------------------------------------------------------------
+-- Module VLAN Table
+-------------------------------------------------------------------------------
+
+moduleVLANTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ModuleVLANEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "This a table of VLAN entries per module. There is a
+ maximum of 64 valid entries in the table"
+ ::= { enhancedchassisTable 6 }
+
+moduleVLANEntry OBJECT-TYPE
+ SYNTAX ModuleVLANEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "VLAN module table."
+ INDEX { modchassnum, modslotnum, index }
+ ::= { moduleVLANTable 1 }
+
+ModuleVLANEntry ::= SEQUENCE {
+ index Integer32,
+ validityflag Integer32,
+ vlanidentifier Integer32,
+ port1Membership Integer32,
+ port2Membership Integer32,
+ port3Membership Integer32,
+ port4Membership Integer32,
+ port5Membership Integer32,
+ port6Membership Integer32
+ }
+
+index OBJECT-TYPE
+ SYNTAX Integer32 (1..64)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Used to get or set elements in the vlan table entry."
+ ::= { moduleVLANEntry 1 }
+
+validityflag OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to set or delete a VLAN table entry.
+ 0 = entry does not exists or is to be deleted,
+ 1 = entry to be created or re-activated (in the case the entry
+ was modified, the module needs to be notified of the change.
+ This would constitute a re-activation."
+ ::= { moduleVLANEntry 2 }
+
+vlanidentifier OBJECT-TYPE
+ SYNTAX Integer32 (0..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to set or get the vlan identifier.
+ valid settable range is 0-4095"
+ ::= { moduleVLANEntry 3 }
+
+port1Membership OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to set or get the port's membership in the specified vlan.
+ 0 = not a member
+ 1 = include in membership"
+ ::= { moduleVLANEntry 4 }
+
+port2Membership OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to set or get the port's membership in the specified vlan.
+ 0 = not a member
+ 1 = include in membership"
+ ::= { moduleVLANEntry 5 }
+
+port3Membership OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to set or get the port's membership in the specified vlan.
+ 0 = not a member
+ 1 = include in membership"
+ ::= { moduleVLANEntry 6 }
+
+
+port4Membership OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to set or get the port's membership in the specified vlan.
+ 0 = not a member
+ 1 = include in membership"
+ ::= { moduleVLANEntry 7 }
+
+port5Membership OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to set or get the port's membership in the specified vlan.
+ 0 = not a member
+ 1 = include in membership"
+ ::= { moduleVLANEntry 8 }
+
+port6Membership OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to set or get the port's membership in the specified vlan.
+ 0 = not a member
+ 1 = include in membership"
+ ::= { moduleVLANEntry 9 }
+
+
+-------------------------------------------------------------------------------
+-- Port AH Table
+-------------------------------------------------------------------------------
+
+portAHTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PortAHEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "This is a table of AH parameter entries per port."
+ ::= { enhancedchassisTable 7 }
+
+portAHEntry OBJECT-TYPE
+ SYNTAX PortAHEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "AH port table."
+ INDEX { modchassnum, modslotnum, portnum }
+ ::= { portAHTable 1 }
+
+PortAHEntry ::= SEQUENCE {
+ ahEnabled Integer32,
+ ahLpbkMode Integer32,
+ ahLocalMode Integer32,
+ ahRemoteMode Integer32,
+ ahLocalMuxState Integer32,
+ ahRemoteMuxState Integer32,
+ ahLocalParserState Integer32,
+ ahRemoteParserState Integer32,
+ ahLocalSupportVar Integer32,
+ ahLocalLinkFlags Integer32,
+ ahLocalLpbkTimeout Integer32,
+ ahRemoteSupportVar Integer32,
+ ahRemoteLinkFlags Integer32,
+ ahRemoteLpbkTimeout Integer32,
+ ahLocalOUI OCTET STRING,
+ ahRemoteOUI OCTET STRING,
+ ahErroredSymbolPeriodWindow Unsigned32,
+ ahErroredSymbolPeriodThreshold Unsigned32,
+ ahErroredFrameWindow Unsigned32,
+ ahErroredFrameThreshold Unsigned32,
+ ahErroredFramePeriodWindow Unsigned32,
+ ahErroredFramePeriodThreshold Unsigned32,
+ ahErroredFrameSecondsWindow Unsigned32,
+ ahErroredFrameSecondsThreshold Unsigned32,
+ ahRemoteLinkPort Integer32,
+ ahSymbolErrorRunningTotal Unsigned32,
+ ahSymbolErrorEventTotal Unsigned32,
+ ahFrameErrorRunningTotal Unsigned32,
+ ahFrameErrorEventTotal Unsigned32,
+ ahFramePeriodRunningTotal Unsigned32,
+ ahFramePeriodEventTotal Unsigned32,
+ ahFrameSecondsSummaryRunningTotal Unsigned32,
+ ahFrameSecondsSummaryEventTotal Unsigned32,
+ ahClearStatistics TruthValue,
+ ahTransmissionRate Unsigned32,
+ ahCriticalEventMode Unsigned32,
+ ahCriticalEventTrapList OCTET STRING
+ }
+
+ahEnabled OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the state of the AH protocol over specified port.
+ 0 = disable - this port is not actively using the AH protocol
+ 1 = enabled - this port is actively using the AH protocol"
+ ::= { portAHEntry 1 }
+
+ahLpbkMode OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the state of the OAM remote loopback.
+ 0 = off - remote loopback is not active
+ 1 = on - remote loopback has been activated"
+ ::= { portAHEntry 2 }
+
+ahLocalMode OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the mode AH OAM Client.
+ 0 = PASSIVE - Does not initiate discovery or remote loopbacks
+ 1 = ACTIVE - Initiates discovery process and may initiate remote loopbacks
+ 2 = PASSIVE, PROTECTED - Same as PASSIVE but disallows configuration requests from link partner using AH extensions
+ 3 = ACTIVE, PROTECTED - Same as ACTIVE but disallows configuration requests from link partner using AH extensions"
+ ::= { portAHEntry 3 }
+
+ahRemoteMode OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get or set the mode AH OAM Client.
+ 0 = PASSIVE - Does not initiate discovery or remote loopbacks
+ 1 = ACTIVE - Initiates discovery process and may initiate remote loopbacks
+ 2 = PASSIVE, PROTECTED - Same as PASSIVE but disallows configuration requests from link partner using AH extensions
+ 3 = ACTIVE, PROTECTED - Same as ACTIVE but disallows configuration requests from link partner using AH extensions"
+ ::= { portAHEntry 4 }
+
+ahLocalMuxState OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get local multiplexer state.
+ 0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer
+ 1 = DISCARD - Multiplexer discards MAC client frames"
+ ::= { portAHEntry 5 }
+
+ahRemoteMuxState OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get remote multiplexer state.
+ 0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer
+ 1 = DISCARD - Multiplexer discards MAC client frames"
+ ::= { portAHEntry 6 }
+
+ahLocalParserState OBJECT-TYPE
+ SYNTAX Integer32 (0..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get local parser state.
+ 0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer
+ 1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during remote loopback test
+ 2 = DISCARD - Parser discards received non-OAMPDUs"
+ ::= { portAHEntry 7 }
+
+ahRemoteParserState OBJECT-TYPE
+ SYNTAX Integer32 (0..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get remote parser state.
+ 0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer
+ 1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during remote loopback test
+ 2 = DISCARD - Parser discards received non-OAMPDUs"
+ ::= { portAHEntry 8 }
+
+ahLocalSupportVar OBJECT-TYPE
+ SYNTAX Integer32 (0..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Used to get local configured features supported in bit encoded value.
+
+ where:
+ bit0 = OAM Mode
+ bit1 = Unidirectional support
+ bit2 = Loopback Support
+ bit3 = interprets link events
+ bit4 = Variable Retrieval
+ bit5 = Critical Event
+ "
+ ::= { portAHEntry 9 }
+
+ahLocalLinkFlags OBJECT-TYPE
+ SYNTAX Integer32 (0..127)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get Link Event status in bit encoded value.
+ where:
+ bit0 = Link Fault
+ bit1 = Dying Gasp
+ bit2 = Critical Event
+ bit3 = Local Evaluating
+ bit4 = Local Stable
+ bit5 = Remote Evaluating
+ bit6 = Remote Stable"
+ ::= { portAHEntry 10 }
+
+ahLocalLpbkTimeout OBJECT-TYPE
+ SYNTAX Integer32 (0..300)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get/set Remote Loopback timeout.
+ Value is in seconds with range 0 - 300."
+ ::= { portAHEntry 11 }
+
+ahRemoteSupportVar OBJECT-TYPE
+ SYNTAX Integer32 (0..31)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Used to get remote configured features supported in bit encoded value.
+
+ where:
+ bit0 = OAM Mode
+ bit1 = Unidirectional support
+ bit2 = Loopback Support
+ bit3 = interprets link events
+ bit4 = Variable Retrieval
+ bit5 = Critical Event
+ "
+ ::= { portAHEntry 12 }
+
+ahRemoteLinkFlags OBJECT-TYPE
+ SYNTAX Integer32 (0..127)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get Link Event status in bit encoded value.
+ bit0 = Link Fault
+ bit1 = Dying Gasp
+ bit2 = Critical Event
+ bit3 = Local Evaluating
+ bit4 = Local Stable
+ bit5 = Remote Evaluating
+ bit6 = Remote Stable"
+ ::= { portAHEntry 13 }
+
+ahRemoteLpbkTimeout OBJECT-TYPE
+ SYNTAX Integer32 (0..300)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get/set Remote Loopback timeout.
+ Value is in seconds with range 0 - 300."
+ ::= { portAHEntry 14 }
+
+ahLocalOUI OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(3))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get the Organizational Unique ID of the local port."
+ ::= { portAHEntry 15 }
+
+ahRemoteOUI OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(3))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get the Organizational Unique ID of the remote port."
+ ::= { portAHEntry 16 }
+
+ahErroredSymbolPeriodWindow OBJECT-TYPE
+ SYNTAX Unsigned32 (0..60)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set errored symbol period window for the local port."
+ ::= { portAHEntry 17 }
+
+ahErroredSymbolPeriodThreshold OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set errored symbol period threshold for the local port."
+ ::= { portAHEntry 18 }
+
+ahErroredFrameWindow OBJECT-TYPE
+ SYNTAX Unsigned32 (0..60)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the errored symbol window for the local port."
+ ::= { portAHEntry 19 }
+
+ahErroredFrameThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the errored symbol threshold for the local port."
+ ::= { portAHEntry 20 }
+
+ahErroredFramePeriodWindow OBJECT-TYPE
+ SYNTAX Unsigned32 (0..60)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the errored frame period window for the local port."
+ ::= { portAHEntry 21 }
+
+ahErroredFramePeriodThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the errored frame period threshold for the local port."
+ ::= { portAHEntry 22 }
+
+ahErroredFrameSecondsWindow OBJECT-TYPE
+ SYNTAX Unsigned32 (0..900)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the errored frame seconds window for the local port."
+ ::= { portAHEntry 23 }
+
+ahErroredFrameSecondsThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the errored frame seconds threshold for the local port."
+ ::= { portAHEntry 24 }
+
+ahRemoteLinkPort OBJECT-TYPE
+ SYNTAX Integer32 (0..5)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get the port number of the remote partner.
+ Value is in the Range 1-5. A zero port number indicates no connection or not supported"
+ ::= { portAHEntry 25 }
+
+ahSymbolErrorRunningTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the 802.3ah Symbol Error Running Total value from
+ the last OAM sublayer reset or clear operation.
+
+ A value of zero indicates that no symbol errors have been detected since
+ the last reset or clear. For each symbol error detected the value of the
+ object increments.
+ "
+ ::= { portAHEntry 26 }
+
+ ahSymbolErrorEventTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of 802.3ah Errored Symbol Period Event
+ TLVs that have been generated since the OAM sublayer was reset or the
+ counters have been cleared.
+
+ A value of zero indicates that no Errored Symbol Period Event TLVs
+ have been generated. For each Errored Symbol Period Event TLV generated
+ the value of the object increments.
+ "
+ ::= { portAHEntry 27 }
+
+ahFrameErrorRunningTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the sum of the 802.3ah errored frames that have been
+ detected since the OAM sublayer was reset or clear operation.
+
+ A value of zero indicates that no errored frames have been detected since
+ the last reset or clear. For each errored frame the value of the
+ object increments.
+ "
+ ::= { portAHEntry 28 }
+
+ ahFrameErrorEventTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of 802.3ah Errored Frame Event TLVs
+ that have been generated since the OAM sublayer was reset or the
+ counters have been cleared.
+
+ A value of zero indicates that no Errored Frame Event TLVs
+ have been generated. For each Errored Frame Event Event TLV generated
+ the value of the object increments.
+ "
+ ::= { portAHEntry 29 }
+
+ahFramePeriodRunningTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the sum of 802.3ah the frame errors that
+ have been detected that have been since the OAM sublayer was reset or
+ clear operation.
+
+ A value of zero indicates that no errored frames have been detected since
+ the last reset or clear. For each errored frame the value of the
+ object increments.
+ "
+ ::= { portAHEntry 30 }
+
+ ahFramePeriodEventTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of 802.3ah Errored Frame Period Event
+ TLVs that have been generated since the OAM sublayer was reset or the
+ counters have been cleared.
+
+ A value of zero indicates that no Errored Frame Period Event TLVs
+ have been generated. For each Errored Symbol Period Event TLV generated
+ the value of the object increments.
+ "
+ ::= { portAHEntry 31 }
+
+ahFrameSecondsSummaryRunningTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the sum of the 802.3ah errored frame seconds that
+ have been detected that have been since the OAM sublayer was reset or
+ clear operation.
+
+ A value of zero indicates that no errored frame seconds have been detected
+ since the last reset or clear. For each errored frame the value of the
+ object increments.
+ "
+ ::= { portAHEntry 32 }
+
+ ahFrameSecondsSummaryEventTotal OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of 802.3ah Errored Frame Seconds
+ Summary Event TLVs that have been generated since the OAM sublayer was
+ reset or the counters have been cleared.
+
+ A value of zero indicates that no Errored Frame Seconds Summary Event
+ TLVs have been generated. For each Errored Symbol Period Event TLV
+ generated the value of the object increments.
+ "
+ ::= { portAHEntry 33 }
+
+ ahClearStatistics OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object when written clears the 802.3ah statistic counters associated with
+ a specific port. When read the value always returns 'false'.
+
+ Writing this value does not change any items in the configuration table.
+ "
+ ::= { portAHEntry 34 }
+
+ ahTransmissionRate OBJECT-TYPE
+ SYNTAX Unsigned32 (5..100)
+ UNITS "Frames/sec"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object sets maximum 802.3ah PDU transmission rate. The default
+ value is 10 (10 frames per second)
+ "
+ ::= { portAHEntry 35 }
+
+ahCriticalEventMode OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to get or set the state of the local critical event mode.
+ 0 = local critical events not enabled
+ 1 = local critical events are enabled
+ "
+ ::= { portAHEntry 36 }
+
+ahCriticalEventTrapList OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..45))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Used to the SNMP traps which will cause the generation of
+ a local critical event. It is a list of zero or more trap numbers
+ separated by a comma or range, '..'.
+
+ Example values:
+ 5
+ 5,110,112
+ 100..110
+ 5,110,90..95,100..105
+
+ The default value is an emtpy string, no SNMP traps generate a local
+ critical event.
+ "
+ ::= { portAHEntry 37 }
+
+
+------------------------------------------------------------------------------
+-- Port SFP Table
+-------------------------------------------------------------------------------
+
+portSFPTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PortSFPEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "This is a table of AH parameter entries per port."
+ ::= { enhancedchassisTable 8 }
+
+portSFPEntry OBJECT-TYPE
+ SYNTAX PortSFPEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "SFP port table."
+ INDEX { modchassnum, modslotnum, portnum }
+ ::= { portSFPTable 1 }
+
+PortSFPEntry ::= SEQUENCE {
+ portSFPstatus Integer32,
+ portSFPpageA0 OCTET STRING,
+ portSFPpageA2 OCTET STRING,
+ portSfpBitRate OCTET STRING,
+ portSfpVendorName OCTET STRING,
+ portSfpVendorPartNumber OCTET STRING,
+ portSfpVendorSerialNumber OCTET STRING,
+ portSfpDateCode OCTET STRING,
+ portSfpTemperature OCTET STRING,
+ portSfpVcc OCTET STRING,
+ portSfpBiasCurrent OCTET STRING,
+ portSfpTxPower OCTET STRING,
+ portSfpRxPower OCTET STRING
+ }
+
+portSFPstatus OBJECT-TYPE
+ SYNTAX Integer32 (0..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get present or absence of SFP device.
+ 0 = undefined
+ 1 = notPresent
+ 2 = present"
+ ::= { portSFPEntry 1 }
+
+portSFPpageA0 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get SFP device EEPROM address A0"
+ ::= { portSFPEntry 2 }
+
+portSFPpageA2 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Used to get SFP device EEPROM address A2"
+ ::= { portSFPEntry 3 }
+
+portSfpBitRate OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP Bitrate in Mbps"
+ ::= { portSFPEntry 4 }
+
+portSfpVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP Vendor Name"
+ ::= { portSFPEntry 5 }
+
+portSfpVendorPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP Vendor Name"
+ ::= { portSFPEntry 6 }
+
+portSfpVendorSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP Serial Number"
+ ::= { portSFPEntry 7 }
+
+portSfpDateCode OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP Date Code"
+ ::= { portSFPEntry 8 }
+
+portSfpTemperature OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP tempearture in degrees Centigrade"
+ ::= { portSFPEntry 9 }
+
+portSfpVcc OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP VCC in volts"
+ ::= { portSFPEntry 10 }
+
+portSfpBiasCurrent OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP Bias Current in millamps"
+ ::= { portSFPEntry 11 }
+
+portSfpTxPower OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP Transmission power in dBm"
+ ::= { portSFPEntry 12 }
+
+portSfpRxPower OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "SFP Transmission power in dBm"
+ ::= { portSFPEntry 13 }
+
+
+-------------------------------------------------------------------------------
+-- SNMPv3 User Table
+-------------------------------------------------------------------------------
+
+userTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UserEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "This is a table of SNMPv3 users."
+ ::= { enhancedchassisTable 9 }
+
+userEntry OBJECT-TYPE
+ SYNTAX UserEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "User table entry."
+ INDEX { modchassnum, modslotnum, userIndex }
+ ::= { userTable 1 }
+
+UserEntry ::= SEQUENCE {
+ userIndex Integer32,
+ snmpv3UserName DisplayString,
+ snmpv3SecurityLevel Integer32,
+ snmpv3AuthPassword OCTET STRING,
+ snmpv3PrivPassword OCTET STRING,
+ snmpv3UserType Integer32
+ }
+
+userIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..4)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "User table index"
+ ::= { userEntry 1 }
+
+snmpv3UserName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "SNMPv3 user name."
+ ::= { userEntry 2 }
+
+snmpv3SecurityLevel OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "SNMPv3 security level
+ 0 = undefined
+ 1 = no authentication/no privacy
+ 2 = authentication/no privacy
+ 3 = authentication/privacy"
+ ::= { userEntry 3 }
+
+snmpv3AuthPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(1..16))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "SNMPv3 user authentication password."
+ ::= { userEntry 4 }
+
+snmpv3PrivPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(1..16))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "SNMPv3 user privacy password."
+ ::= { userEntry 5 }
+
+snmpv3UserType OBJECT-TYPE
+ SYNTAX Integer32 (0..4)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "SNMPv3 User Type
+ 0 = undefined
+ 1 = admin
+ 2 = read-write
+ 3 = read-only
+ 4 = deny"
+ ::= { userEntry 6 }
+
+
+--------------------------------------------------------------------------------
+-- User Session Status Table
+--------------------------------------------------------------------------------
+
+ostProtocolStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OstProtocolStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table supports the Serial, Telnet, FTP user session status."
+ ::= { enhancedchassisTable 10 }
+
+ostProtocolStatusEntry OBJECT-TYPE
+ SYNTAX OstProtocolStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a user protocol table entry."
+ INDEX { modchassnum, modslotnum, userIndex, ostProtocolStatusIndex}
+ ::= { ostProtocolStatusTable 1 }
+
+OstProtocolStatusEntry ::= SEQUENCE {
+ ostProtocolStatusIndex Unsigned32,
+ ostProtocolStatusType INTEGER,
+ ostProtocolStatusState INTEGER,
+ ostProtocoManagementPort INTEGER,
+ ostProtocolStatusIpAddress IpAddress,
+ ostProtocolStatusSessionOpenLockTime TimeInterval
+ }
+
+ostProtocolStatusIndex OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index that is used to identify a specific user protocol session.
+
+ The index should remain constant until the session is closed.
+ "
+ ::= { ostProtocolStatusEntry 1 }
+
+ostProtocolStatusType OBJECT-TYPE
+ SYNTAX INTEGER {
+ serial (1),
+ telnet (2),
+ ftp (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the specific user protocol session identity
+ state.
+
+ serial (1) User protocol session type is the serial port
+ telnet (2) User protocol session type is TELNET
+ ftp (3) User protocol session type is FTP
+ "
+ ::= { ostProtocolStatusEntry 2 }
+
+ostProtocolStatusState OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive (1),
+ active (2),
+ lockedout (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of the specific user protocol session
+ state.
+
+ inactive(1) User is currently inactive (reserved value, not used)
+ active(2) User is currently authenticated and active
+ lockedout(3) User is currently locked out for authentication and
+ cannot become active until the locked out timeout
+ expires and the user status goes back to idle.
+ "
+ ::= { ostProtocolStatusEntry 3 }
+
+ostProtocoManagementPort OBJECT-TYPE
+ SYNTAX INTEGER {
+ notDefined (1),
+ mgt1 (2),
+ mgt2 (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of the specific user protocol session
+ state. It is not applicable to the 'serial' interface or to a
+ session type that is locked out. In these cases the object is returned
+ with a value of 'notDefined'.
+
+ notDefined(1) Management port is unknown or undefined
+ mgt1(2) Management Port 1 association
+ mgt2(3) Management Port 2 association
+
+ "
+ ::= { ostProtocolStatusEntry 4 }
+
+ostProtocolStatusIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the IP address of the specific user protocol
+ session. It is not applicable to the 'serial' interface or to a
+ session type that is locked out. In these cases this object is returned
+ as '0.0.0.0'.
+ "
+ ::= { ostProtocolStatusEntry 5 }
+
+ostProtocolStatusSessionOpenLockTime OBJECT-TYPE
+ SYNTAX TimeInterval
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The object indicates the time a specific user protocol session has
+ been open or is locked out, in 0.01 seconds, based upon the value of
+ ostProtocolStatusState.
+ "
+ ::= { ostProtocolStatusEntry 6 }
+
+
+--------------------------------------------------------------------------------
+-- Environmental Status Table
+--------------------------------------------------------------------------------
+
+ostEnvironmentalStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OstEnvironmentalStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table supports the module environmental status objects."
+ ::= { enhancedchassisTable 11 }
+
+ostEnvironmentalStatusEntry OBJECT-TYPE
+ SYNTAX OstEnvironmentalStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is an environmental table entry."
+ INDEX { modchassnum, modslotnum }
+ ::= { ostEnvironmentalStatusTable 1 }
+
+OstEnvironmentalStatusEntry ::= SEQUENCE {
+ ostEnvironmentalPs1Status INTEGER,
+ ostEnvironmentalPs1VoltageIn Integer32,
+ ostEnvironmentalPs1VoltageOut Unsigned32,
+ ostEnvironmentalPs1CurrentOut Unsigned32,
+
+ ostEnvironmentalPs2Status INTEGER,
+ ostEnvironmentalPs2VoltageIn Integer32,
+ ostEnvironmentalPs2VoltageOut Unsigned32,
+ ostEnvironmentalPs2CurrentOut Unsigned32,
+
+ ostEnvironmentalTemperature Integer32,
+
+ ostEnvironmentalFan1Status INTEGER,
+ ostEnvironmentalFan1Speed Unsigned32,
+ ostEnvironmentalFan2Status INTEGER,
+ ostEnvironmentalFan2Speed Unsigned32,
+ ostEnvironmentalFan3Status INTEGER,
+ ostEnvironmentalFan3Speed Unsigned32
+ }
+
+ostEnvironmentalPs1Status OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable (0),
+ notInstalled (1),
+ installedNotPowered (2),
+ installedPowered (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of Power Supply PS1 or PSA.
+
+ notApplicable(0) Power Supply PS1/PSA is not supported
+ notInstalled(1) Power Supply PS1/PSA is not installed
+ installedNotPowered(2) Power Supply PS1/PSA is installed, but not powered
+ installedPowered(3) Power Supply PS1/PSA is installed and powered
+ "
+ ::= { ostEnvironmentalStatusEntry 1 }
+
+ostEnvironmentalPs1VoltageIn OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "millivolts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates PS1/PSA voltage input in millivolts.
+
+ A value of zero indicates that no voltage is applied or the power
+ supply is incapable of supplying a voltage input reading.
+ "
+
+ ::= { ostEnvironmentalStatusEntry 2 }
+
+ostEnvironmentalPs1VoltageOut OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "millivolts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates PS1/PSA voltage output in millivolts.
+
+ A value of zero indicates that no voltage is output or the power
+ supply is incapable of supplying a voltage output reading.
+ "
+ ::= { ostEnvironmentalStatusEntry 3 }
+
+ostEnvironmentalPs1CurrentOut OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "milliamps"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates PS1/PSA current output in millianmps.
+
+ A value of zero indicates that no current is output or the power
+ supply is incapable of supplying a current output reading.
+ "
+ ::= { ostEnvironmentalStatusEntry 4 }
+
+ostEnvironmentalPs2Status OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable (0),
+ notInstalled (1),
+ installedNotPowered (2),
+ installedPowered (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of Power Supply PS2 or PSB.
+
+ notApplicable(0) Power Supply PS2/PSB is not supported
+ notInstalled(1) Power Supply PS2/PSB is not installed
+ installedNotPowered(2) Power Supply PS2/PSB is installed, but not powered
+ installedPowered(3) Power Supply PS2/PSB is installed and powered
+ "
+ ::= { ostEnvironmentalStatusEntry 5 }
+
+ostEnvironmentalPs2VoltageIn OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "millivolts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates PS2/PSB voltage input in millivolts.
+
+ A value of zero indicates that no voltage is applied or the power
+ supply is incapable of supplying a voltage input reading.
+ "
+ ::= { ostEnvironmentalStatusEntry 6 }
+
+ostEnvironmentalPs2VoltageOut OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "millivolts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates PS2/PSB voltage output in millivolts.
+
+ A value of zero indicates that no voltage is output or the power
+ supply is incapable of supplying a voltage output reading.
+ "
+ ::= { ostEnvironmentalStatusEntry 7 }
+
+ostEnvironmentalPs2CurrentOut OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "milliamps"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates PS2/PSB current output in millianmps.
+
+ A value of zero indicates that no current is output or the power
+ supply is incapable of supplying a current output reading.
+ "
+ ::= { ostEnvironmentalStatusEntry 8 }
+
+ostEnvironmentalTemperature OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "degrees centigrade"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the module internal ambient temperature in
+ degrees centigrade.
+
+ A value of zero indicates that the current temperature is 0 degrees or
+ the module incapable of supplying a temperature reading.
+ "
+ ::= { ostEnvironmentalStatusEntry 9 }
+
+ostEnvironmentalFan1Status OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable (0),
+ notInstalled (1),
+ installedNotPowered (2),
+ installedPowered (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of Fan 1.
+
+ notApplicable(0) Fan 1 is not supported
+ notInstalled(1) Fan 1 is not installed
+ installedNotPowered(2) Fan 1 is installed, but not powered
+ installedPowered(3) Fan 1 is installed and powered
+ "
+ ::= { ostEnvironmentalStatusEntry 10 }
+
+ostEnvironmentalFan1Speed OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "rpm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the speed of Fan 1 in RPM (revolutions per minute)
+
+ A value of zero indicates that the current fan speed is 0 RPM or
+ the fan is not supported or installed.
+ "
+ ::= { ostEnvironmentalStatusEntry 11 }
+
+ostEnvironmentalFan2Status OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable (0),
+ notInstalled (1),
+ installedNotPowered (2),
+ installedPowered (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of Fan 2.
+
+ notApplicable(0) Fan 2 is not supported
+ notInstalled(1) Fan 2 is not installed
+ installedNotPowered(2) Fan 2 is installed, but not powered
+ installedPowered(3) Fan 2 is installed and powered
+ "
+ ::= { ostEnvironmentalStatusEntry 12 }
+
+ostEnvironmentalFan2Speed OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "rpm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the speed of Fan 2 in RPM (revolutions per minute)
+
+ A value of zero indicates that the current fan speed is 0 RPM or
+ the fan is not supported or installed.
+ "
+ ::= { ostEnvironmentalStatusEntry 13 }
+
+ostEnvironmentalFan3Status OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable (0),
+ notInstalled (1),
+ installedNotPowered (2),
+ installedPowered (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of Fan 3.
+
+ notApplicable(0) Fan 3 is not supported
+ notInstalled(1) Fan 3 is not installed
+ installedNotPowered(2) Fan 3 is installed, but not powered
+ installedPowered(3) Fan 3 is installed and powered
+ "
+ ::= { ostEnvironmentalStatusEntry 14 }
+
+ostEnvironmentalFan3Speed OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "rpm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the speed of Fan 3 in RPM (revolutions per minute)
+
+ A value of zero indicates that the current fan speed is 0 RPM or
+ the fan is not supported or installed.
+ "
+ ::= { ostEnvironmentalStatusEntry 15 }
+
+
+-------------------------------------------------------------------------------
+-- Conformance
+-------------------------------------------------------------------------------
+
+omnitronCompliances OBJECT IDENTIFIER ::= { omnitronConformance 1 }
+omnitronGroups OBJECT IDENTIFIER ::= { omnitronConformance 2 }
+
+-- compliance statements
+
+omnitronCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION "The compliance statement for OMNITRON iConverter modules."
+ MODULE
+ MANDATORY-GROUPS { omnitronGroup }
+ GROUP omnitronSFPGroup
+ DESCRIPTION "The omnitronSFPGroup is only mandatory for ports which have SFPs."
+ ::= { omnitronCompliances 1 }
+
+-- units of conformance
+
+omnitronGroup OBJECT-GROUP
+ OBJECTS {
+ chassis,
+ selfSlot,
+
+ chassisnum,
+ slotnum,
+ chassistype,
+ prodtype,
+ chassisname,
+ partnum,
+ serialnum,
+ manufdate,
+ softrev,
+ prodrev,
+ ledstat,
+ switchstat,
+ extended1,
+ extended2,
+ extended3,
+ extended4,
+ extended5,
+ extended6,
+ resetmod,
+ wrswitch,
+ modulename,
+
+ moduleCount,
+ modchassnum,
+ modslotnum,
+ modchasstype,
+ modprodtype,
+ modsoftrev,
+ modprodrev,
+ modreset,
+ modnumports,
+ modchassname,
+ modpartnum,
+ modserialnum,
+ modmanufdate,
+ modname,
+ modportvlan,
+ modextfeaturebits,
+ modswbuildnum,
+ modenable802dot1qProcessing,
+ modtagsubstitution,
+ modcommitVLANchanges,
+ modvlanTableClear,
+ modcommitNMMCfgChanges,
+ modLM80volts,
+ modLM80currents,
+ modLM80misc,
+ modRestoreFactoryDefaults,
+
+ sysAdminStatus,
+ sysDateTime,
+ macAddr,
+ ipAddr,
+ subnetmask,
+ gateway,
+ readCommunity,
+ writeCommunity,
+ mychassnum,
+ mmname,
+ traphost1,
+ traphost2,
+ traphost3,
+ traphost4,
+ traphost5,
+ traphost6,
+ traphost7,
+ traphost8,
+ sysloc,
+ syscon,
+ serialpass,
+ telnetpass,
+ ftppasswrd,
+ keepAliveInterval,
+ vlanIdOst,
+ nmmCfgSerialBaudrate,
+ enabledFunctions,
+ enableSNMPFunction,
+ nmmCfgState,
+ nmmSecureMode,
+ nmmSecureConnState,
+ nmmIpProtocolState,
+ nmmIpDisabled,
+ vlanPri,
+ enableSNMPWrites,
+ cpuVoltageIn,
+ cpuVoltageOut,
+ cpuTemperature,
+ nmmSecureSlaveSlot,
+ dhcpIpAddr,
+ dhcpSubnetmask,
+ dhcpGateway,
+ nmmOAMmgmtMode,
+ customertag,
+ servicetag,
+ cnodeControl,
+ cnodeCIR,
+ enableSNMPv3Function,
+ slaveWrite,
+ snmpTrapType,
+ capsMask,
+ slaveTraps,
+ slaveTrapsForward,
+ coreStatusOnly,
+ ingressPolicingType,
+ vlanservicetag,
+ defaultForwardingMap,
+ modFpgaRev,
+ modExpPartNumber,
+ modExpSoftwareRev,
+ modExpLedStatus,
+ modHwRev,
+ modPcbRev,
+
+ ipAddr2,
+ subnetmask2,
+ gateway2,
+ ipaddrEVCassociation,
+ ipaddr2EVCassociation,
+ bootpEnable,
+ tftpEnable,
+ tftpServerIpAddress,
+ dhcptftpServerIpAddress,
+ tftpFileName,
+ modeType,
+ dhcpPortNumber,
+ dhcpTagVid,
+ trapSrcIpSelect,
+ muxGroupDefaults,
+ portFwdCpu,
+ portFwdCpuList,
+
+ portState,
+ portEgressRate,
+ portpriority,
+ portcanonicalformatIndicator,
+ portvlanidentifier,
+ portmlistcriteria,
+ portingresssecurity,
+ portegresspolicy,
+ portIngressRate,
+ portSpeed,
+ portUnidirectionalAhOamEnable,
+ portIngressRateDropOrPause,
+ portIngressRateCBS,
+ portL2CPmgntProcessing,
+ portEgressQosPolicy,
+ portAccessType,
+ portStatsClear,
+ portLinkState,
+ portDuplex,
+ portMacAddress,
+
+ txOctets,
+ txDropPkts,
+ txBroadcastPkts,
+ txMulticastPkts,
+ txUnicastPkts,
+ txGoodPkts,
+ txErrorPkts,
+ txPausePkts,
+ txCollisions,
+ txSingleCollision,
+ txMultipleCollision,
+ txDeferedTransmit,
+ txLateCollision,
+ txExcessiveCollision,
+ txDroppedEvents,
+ rxOctets,
+ rxDropPkts,
+ rxBroadcastPkts,
+ rxMulticastPkts,
+ rxUnicastPkts,
+ rxGoodPkts,
+ rxTotalPkts,
+ rxErrorPkts,
+ rxPausePkts,
+ rxUndersizePkts,
+ rxOversizePkts,
+ rxFragments,
+ rxJabbers,
+ rxAlignmentErrors,
+ rxFCSErrors,
+ rxSymbolErrors,
+ rxCRCAlignErrors,
+ rxPackets64,
+ rxPackets65to127,
+ rxPackets128to255,
+ rxPackets256to511,
+ rxPackets512to1023,
+ rxPackets1024to1518,
+ txOctets64,
+ rxOctets64,
+
+ validityflag,
+ vlanidentifier,
+ port1Membership,
+ port2Membership,
+ port3Membership,
+ port4Membership,
+ port5Membership,
+ port6Membership,
+
+ ahEnabled,
+ ahLpbkMode,
+ ahLocalMode,
+ ahRemoteMode,
+ ahLocalMuxState,
+ ahRemoteMuxState,
+ ahLocalParserState,
+ ahRemoteParserState,
+ ahLocalSupportVar,
+ ahLocalLinkFlags,
+ ahLocalLpbkTimeout,
+ ahRemoteSupportVar,
+ ahRemoteLinkFlags,
+ ahRemoteLpbkTimeout,
+ ahLocalOUI,
+ ahRemoteOUI,
+ ahErroredSymbolPeriodWindow,
+ ahErroredSymbolPeriodThreshold,
+ ahErroredFrameWindow,
+ ahErroredFrameThreshold,
+ ahErroredFramePeriodWindow,
+ ahErroredFramePeriodThreshold,
+ ahErroredFrameSecondsWindow,
+ ahErroredFrameSecondsThreshold,
+ ahRemoteLinkPort,
+ ahSymbolErrorRunningTotal,
+ ahSymbolErrorEventTotal,
+ ahFrameErrorRunningTotal,
+ ahFrameErrorEventTotal,
+ ahFramePeriodRunningTotal,
+ ahFramePeriodEventTotal,
+ ahFrameSecondsSummaryRunningTotal,
+ ahFrameSecondsSummaryEventTotal,
+ ahClearStatistics,
+ ahTransmissionRate,
+ ahCriticalEventMode,
+ ahCriticalEventTrapList,
+
+ snmpv3UserName,
+ snmpv3SecurityLevel,
+ snmpv3AuthPassword,
+ snmpv3PrivPassword,
+ snmpv3UserType,
+
+ ostProtocolStatusType,
+ ostProtocolStatusState,
+ ostProtocoManagementPort,
+ ostProtocolStatusIpAddress,
+ ostProtocolStatusSessionOpenLockTime,
+
+ ostEnvironmentalPs1Status,
+ ostEnvironmentalPs1VoltageIn,
+ ostEnvironmentalPs1VoltageOut,
+ ostEnvironmentalPs1CurrentOut,
+ ostEnvironmentalPs2Status,
+ ostEnvironmentalPs2VoltageIn,
+ ostEnvironmentalPs2VoltageOut,
+ ostEnvironmentalPs2CurrentOut,
+ ostEnvironmentalTemperature,
+ ostEnvironmentalFan1Status,
+ ostEnvironmentalFan1Speed,
+ ostEnvironmentalFan2Status,
+ ostEnvironmentalFan2Speed,
+ ostEnvironmentalFan3Status,
+ ostEnvironmentalFan3Speed
+
+ }
+ STATUS current
+ DESCRIPTION "A collection of Omnitron objects."
+ ::= { omnitronGroups 1 }
+
+
+omnitronSFPGroup OBJECT-GROUP
+ OBJECTS {
+ portSFPstatus,
+ portSFPpageA0,
+ portSFPpageA2,
+ portSfpBitRate,
+ portSfpVendorName,
+ portSfpVendorPartNumber,
+ portSfpVendorSerialNumber,
+ portSfpDateCode,
+ portSfpTemperature,
+ portSfpVcc,
+ portSfpBiasCurrent,
+ portSfpTxPower,
+ portSfpRxPower
+ }
+ STATUS current
+ DESCRIPTION "A collection of Omnitron port SFP objects."
+ ::= { omnitronGroups 2 }
+
+
+END
\ No newline at end of file diff --git a/MIBS/omnitron/OMNITRON-POE-MIB b/MIBS/omnitron/OMNITRON-POE-MIB new file mode 100644 index 0000000..d34bce0 --- /dev/null +++ b/MIBS/omnitron/OMNITRON-POE-MIB @@ -0,0 +1,406 @@ +OMNITRON-POE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress
+ FROM SNMPv2-SMI -- RFC-2578
+ TruthValue
+ FROM SNMPv2-TC -- RFC-2579
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF -- RFC-2580
+ omnitron, OstPortSingleIndex, OstFloatValue
+ FROM OMNITRON-TC-MIB; -- Omnitron Enterprise Extension MIB
+
+omnitronPoeMib MODULE-IDENTITY
+ LAST-UPDATED "201501191200Z" -- January 19, 2015
+ ORGANIZATION "Omnitron Systems Technology, Inc."
+ CONTACT-INFO "Omnitron Systems Technology, Inc.
+ 38 Tesla
+ Irvine, CA 92618-4670
+ USA
+
+ Tel: (949) 250 6510
+ Fax: (949) 250 6514
+ E-mail: info@omnitron-systems.com
+ International: +1 949 250 6510
+
+ Technical Support and Customer Service
+ Tel: (800) 675 8410
+ E-mail: support@omnitron-systems.com
+ International: +1 949 250 6510"
+
+ DESCRIPTION
+ "Omnitron PoE MIB for use with iConverter Management Modules v5.2
+ and NetOutlook.
+
+ Copyright 2015 Omnitron Systems Technology, Inc.
+ All rights reserved.
+ "
+
+ REVISION "201501191200Z" -- January 19, 2015
+ DESCRIPTION "Initial version of v5.2 MIB.
+ "
+ ::= { omnitron 15 }
+
+
+--------------------------------------------------------------------------------
+-- Power Over Ethernet (PoE) Global Configuration Table
+--------------------------------------------------------------------------------
+
+ostPoeGlobalCfgTable OBJECT IDENTIFIER ::= { omnitronPoeMib 1 }
+
+ostPoeGlobalCfgPwrLimitationEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies whether the PoE PSE power limiting function is enabled.
+
+ The value 'true' indicates that PoE PSE limiting is enabled.
+
+ The value 'false' indicates that PoE PSE limiting is disabled.
+ "
+ DEFVAL { false }
+ ::= { ostPoeGlobalCfgTable 1 }
+
+ostPoeGlobalCfgTotalPwr OBJECT-TYPE
+ SYNTAX OstFloatValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the total power sourced in Watts.
+ "
+ DEFVAL { "0.0" }
+ ::= { ostPoeGlobalCfgTable 2 }
+
+
+--------------------------------------------------------------------------------
+-- Power Over Ethernet (PoE) Port Configuration Table
+--------------------------------------------------------------------------------
+
+ostPoePortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OstPoePortCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table supports the port PoE configurations."
+ ::= { omnitronPoeMib 2 }
+
+ostPoePortCfgEntry OBJECT-TYPE
+ SYNTAX OstPoePortCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a PoE port configuration table entry."
+ INDEX { ostPoePortCfgIndex }
+ ::= { ostPoePortCfgTable 1 }
+
+OstPoePortCfgEntry ::= SEQUENCE {
+ ostPoePortCfgIndex OstPortSingleIndex,
+ ostPoePortPseEnable INTEGER,
+ ostPoePortPse60wMode INTEGER,
+ ostPoePortPdMode INTEGER,
+ ostPoePortPseVoltageSupplied OstFloatValue,
+ ostPoePortPseCurrentSupplied OstFloatValue,
+ ostPoePortPseStatus INTEGER,
+
+ ostPoePortHeartbeatEnable INTEGER,
+ ostPoePortHeartbeatIpAddress IpAddress,
+ ostPoePortHeartbeatInterval Unsigned32,
+ ostPoePortHeartbeatErrorDetection Unsigned32,
+ ostPoePortHeartbeatErrorAction INTEGER,
+ ostPoePortHeartbeatNumberRestarts Unsigned32,
+ ostPoEPortHeartbeatStatus INTEGER,
+ ostPoEPortHeartbeatDeferTime Unsigned32
+ }
+
+ostPoePortCfgIndex OBJECT-TYPE
+ SYNTAX OstPortSingleIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index that is used to identify a specific PoE port number."
+ ::= { ostPoePortCfgEntry 1 }
+
+
+ostPoePortPseEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ pseDisabled (1),
+ pseEnabled (2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PSE port enable.
+
+ pseDisabled(1) PSE power source is disabled
+ pseEnabled(2) PSE power source is enabled
+ "
+ DEFVAL { pseEnabled }
+ ::= { ostPoePortCfgEntry 2 }
+
+ostPoePortPse60wMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ pse60wNotAvail (0),
+ pse60wAuto (1),
+ pse60wForce (2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The object is the PoE PSE 60W mode enable. This is the same control as
+ the physical DIP switch.
+
+ pse60wNotAvail PSE 60W function not available
+ pse60wAuto(1) PSE 60W auto mode enabled
+ pse60wForce(2) PSE 60W force mode enabled
+ "
+ DEFVAL { pse60wAuto }
+ ::= { ostPoePortCfgEntry 3 }
+
+ostPoePortPdMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ pdModeNotDetected (1),
+ pdModeNotClassified (2),
+ pdModeFailure (3),
+ pdModeClass0 (4),
+ pdModeClass1 (5),
+ pdModeClass2 (6),
+ pdModeClass3 (7),
+ pdModeClass4 (8),
+ pdMode60W (9)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PD classification mode.
+
+ pdModeNotDetected(1) PD is not detected
+ pdModeNotClassified(2) PD is not classified
+ pdModeFailure(3) PD classification failure
+ pdModeClass0(4) PD is 802.3af Class 0 15W device
+ pdModeClass1(5) PD is 802.3af Class 1 4W device
+ pdModeClass2(6) PD is 802.3af Class 2 7W device
+ pdModeClass3(7) PD is 802.3af Class 3 15W device
+ pdModeClass4(8) PD is 802.3at Class 4 30W device
+ pdMode60W(9) PD is 60W device
+ "
+ DEFVAL { pdModeNotDetected }
+ ::= { ostPoePortCfgEntry 4 }
+
+ostPoePortPseVoltageSupplied OBJECT-TYPE
+ SYNTAX OstFloatValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the voltage output from the PSE port in volts.
+ "
+ DEFVAL { "0.0" }
+ ::= { ostPoePortCfgEntry 5 }
+
+ostPoePortPseCurrentSupplied OBJECT-TYPE
+ SYNTAX OstFloatValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the current output from the PSE port in mA
+ (milliamps).
+ "
+ DEFVAL { "0.0" }
+ ::= { ostPoePortCfgEntry 6 }
+
+ostPoePortPseStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable (1),
+ pdNormal (2),
+ pdOverCurrent (3),
+ pdBrownOut (4),
+ pdInsufficientPower (5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PSE port status.
+
+ notApplicable(1) PD device not connected or port disabled
+ pdNormal(2) PD device is being powered fully
+ pdOverCurrent(3) PD device is consuming too much current
+ pdBrownOut(4) PD device is not fully powered
+ pdInsufficientPower(5) PD device not powered due to lack of power
+
+ A write to this object restarts the PSE function and classification.
+ "
+ DEFVAL { notApplicable }
+ ::= { ostPoePortCfgEntry 7 }
+
+ostPoePortHeartbeatEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ heartbeatDisabled (1),
+ heartbeatEnabled (2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PSE heartbeat enable.
+
+ heartbeatDisabled(1) PSE PD heartbeat is disabled
+ heartbeatEnabled(2) PSE PD heartbeat is enabled
+ "
+ DEFVAL { heartbeatDisabled }
+ ::= { ostPoePortCfgEntry 8 }
+
+ostPoePortHeartbeatIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PD heartbeat IP address to ping.
+ "
+ DEFVAL { '00000000'H }
+ ::= { ostPoePortCfgEntry 9 }
+
+ostPoePortHeartbeatInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (1..300)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PSE PD heartbeat transmission interval in seconds.
+ "
+ DEFVAL { 1 }
+ ::= { ostPoePortCfgEntry 10 }
+
+ostPoePortHeartbeatErrorDetection OBJECT-TYPE
+ SYNTAX Unsigned32 (1..100)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PSE PD heartbeat number of consecutively lost
+ heartbeat pings before an errored condition is declared. The number
+ of consecutive error counts is cleared when a valid heartbeat
+ response is received.
+ "
+ DEFVAL { 3 }
+ ::= { ostPoePortCfgEntry 11 }
+
+ostPoePortHeartbeatErrorAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ errorLostIgnored (1),
+ errorRestart (2),
+ errorShutdown (3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PSE heartbeat errored condition action.
+
+ errorLostIgnored(1) PD heartbeat errored condition is ignored
+ errorRestart(2) PD heartbeat errored condition results
+ in a restart
+ errorShutdown(3) PD heartbeat errored condition results
+ in a shutdown (power removed)
+ "
+ DEFVAL { errorLostIgnored }
+ ::= { ostPoePortCfgEntry 12 }
+
+ostPoePortHeartbeatNumberRestarts OBJECT-TYPE
+ SYNTAX Unsigned32 (0..16384)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PSE PD number of restarts when an errored
+ hearbeat condition occurs. This object is only used when
+ ostPoePortHeartbeatErrorAction is configured as 'errorRestart'
+
+ A value of zero indicates restarts never stop.
+ "
+ DEFVAL { 0 }
+ ::= { ostPoePortCfgEntry 13 }
+
+
+ostPoEPortHeartbeatStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ heartbeatDisabled (1),
+ heartbeatAvailable (2),
+ heartbeatErrored (3),
+ heartbeatRestart (4),
+ heartbeatShutdown (5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE PSE PD heartbeat status.
+
+ heartbeatDisabled(1) PSE PD heartbeat is disabled
+ heartbeatAvailable(2) PSE PD heartbeats are being received
+ heartbeatErrored(3) PSE PD heartbeat is in an errored condition
+ heartbeatRestart(4) PSE PD heartbeat error has caused a PSE restart
+ heartbeatShutdown(5) PSE PD heartbeat error has caused a PSE shutdown
+ "
+ DEFVAL { heartbeatDisabled }
+ ::= { ostPoePortCfgEntry 14 }
+
+ostPoEPortHeartbeatDeferTime OBJECT-TYPE
+ SYNTAX Unsigned32 (1..300)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is the PoE heartbeat PSE PD heartbeat transmission delay
+ interval in seconds after the port has been reenabled. The delay is
+ the amount of time after power has been applied before the heartbeat
+ function starts and hence the detection of heartbeat errors.
+ "
+ DEFVAL { 5 }
+ ::= { ostPoePortCfgEntry 15 }
+
+
+--------------------------------------------------------------------------------
+-- Conformance Information
+--------------------------------------------------------------------------------
+ostPoeCompliances OBJECT IDENTIFIER ::= { omnitronPoeMib 3 }
+ostPoeGroups OBJECT IDENTIFIER ::= { omnitronPoeMib 4 }
+
+
+--------------------------------------------------------------------------------
+-- Omnitron PoE MIB Units of conformance
+--------------------------------------------------------------------------------
+ostPoeGroup OBJECT-GROUP
+ OBJECTS {
+ ostPoeGlobalCfgPwrLimitationEnable,
+ ostPoeGlobalCfgTotalPwr,
+
+ ostPoePortPseEnable,
+ ostPoePortPse60wMode,
+ ostPoePortPdMode,
+ ostPoePortPseVoltageSupplied,
+ ostPoePortPseCurrentSupplied,
+ ostPoePortPseStatus,
+
+ ostPoePortHeartbeatEnable,
+ ostPoePortHeartbeatIpAddress,
+ ostPoePortHeartbeatInterval,
+ ostPoePortHeartbeatErrorDetection,
+ ostPoePortHeartbeatErrorAction,
+ ostPoePortHeartbeatNumberRestarts,
+ ostPoEPortHeartbeatStatus,
+ ostPoEPortHeartbeatDeferTime
+ }
+ STATUS current
+ DESCRIPTION
+ "Mandatory objects for the PoE functional group."
+ ::= { ostPoeGroups 1 }
+
+
+--------------------------------------------------------------------------------
+-- Omnitron POE MIB Compliance statements
+-------------------------------------------------------------------------------
+ostPoeCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION "The compliance statement for the Omnitron PoE MIB."
+ MODULE
+ MANDATORY-GROUPS {
+ ostPoeGroup
+ }
+ ::= { ostPoeCompliances 2 }
+
+
+END
+
diff --git a/MIBS/omnitron/OMNITRON-TC-MIB b/MIBS/omnitron/OMNITRON-TC-MIB new file mode 100644 index 0000000..2d0548b --- /dev/null +++ b/MIBS/omnitron/OMNITRON-TC-MIB @@ -0,0 +1,873 @@ +OMNITRON-TC-MIB DEFINITIONS ::= BEGIN
+
+-- *****************************************************************************
+-- TEXTUAL-CONVENTIONs MIB for Omnitron Systems Technology Enterprise MIBs
+-- *****************************************************************************
+
+IMPORTS
+ MODULE-IDENTITY, Integer32, Unsigned32, Counter64, enterprises
+ FROM SNMPv2-SMI -- RFC-2578
+ TEXTUAL-CONVENTION
+ FROM SNMPv2-TC; -- RFC 2579
+
+
+ostOmnitronTcMib MODULE-IDENTITY
+ LAST-UPDATED "201505131200Z" -- May 13, 2015
+ ORGANIZATION "Omnitron Systems Technology, Inc."
+ CONTACT-INFO "Omnitron Systems Technology, Inc.
+ 38 Tesla
+ Irvine, CA 92618-4670
+ USA
+
+ Tel: (949) 250 6510
+ Fax: (949) 250 6514
+ E-mail: info@omnitron-systems.com
+ International: 949 250 6510
+
+ Technical Support and Customer Service
+ Tel: (800) 675 8410
+ E-mail: support@omnitron-systems.com
+ International: 949 250 6510"
+
+ DESCRIPTION
+ "Omnitron TC MIB for use with v5.2 iConverter Management Modules
+ and NetOutlook
+
+ Copyright 2015 Omnitron Systems Technology, Inc.
+ All rights reserved
+ "
+
+ REVISION "201505131200Z" -- May 13, 2015
+ DESCRIPTION "Added OstIpv6Addr, OstIpAddr
+ "
+
+ REVISION "201501211200Z" -- January 21, 2015
+ DESCRIPTION "Initial version of v5.2 MIB.
+ Added OstAccessibiltyType from the OMNITRON-ACL-MIB
+ "
+ ::= { enterprises 7342 11 }
+
+omnitron OBJECT IDENTIFIER ::= { enterprises 7342 }
+icAgent OBJECT IDENTIFIER ::= { omnitron 1 }
+
+
+-- *****************************************************************************
+-- Textual Conventions (TC)
+-- *****************************************************************************
+-- TC definitions are placed in alphabetical order
+
+OstAccessibiltyType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Accessibilty type enumeration.
+
+ deny(1) Access to the module is not allowed
+ permit(2) Access to the module is allowed
+ "
+ SYNTAX INTEGER {
+ deny (1),
+ permit (2)
+ }
+
+
+OstClassOfService ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Class of service setting. 0=discard, 1=lowest class, 4=highest class"
+ SYNTAX Unsigned32 (0..4)
+
+
+OstClockFreq ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-2"
+ STATUS current
+ DESCRIPTION
+ "Clock frequency in hundreths of MHz."
+ SYNTAX Unsigned32
+
+
+OstCosL2cpDstAddr ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "L2CP destination address enumeration.
+
+ Index | Destination Address | Name
+ ------+--------------------+---------
+ 1 | 01-80-C2-00-00-00 | RSTP
+ 2 | 01-80-C2-00-00-01 | Pause
+ 3 | 01-80-C2-00-00-02 | LACP
+ 4 | 01-80-C2-00-00-02 | Marker
+ 5 | 01-80-C2-00-00-02 | Link OAM
+ 6 | 01-80-C2-00-00-02 |
+ 7 | 01-80-C2-00-00-03 | 802.1x
+ 8 | 01-80-C2-00-00-04 | IEEE MAC
+ 9 | 01-80-C2-00-00-05 |
+ 10 | 01-80-C2-00-00-06 |
+ 11 | 01-80-C2-00-00-07 | E-LMI
+ 12 | 01-80-C2-00-00-08 | Pr Bridge
+ 13 | 01-80-C2-00-00-09 |
+ 14 | 01-80-C2-00-00-0A |
+ 15 | 01-80-C2-00-00-0B |
+ 16 | 01-80-C2-00-00-0C |
+ 17 | 01-80-C2-00-00-0D | GVRP
+ 18 | 01-80-C2-00-00-0E | LLDP
+ 19 | 01-80-C2-00-00-0F |
+ 20 | 01-80-C2-00-00-20 | GARP
+ "
+ SYNTAX Unsigned32 (1..20)
+
+
+OstCosNameString ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "A class of service name."
+ SYNTAX OCTET STRING (SIZE(1..45))
+
+
+OstCosNameStringOrNone ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "A class of service name or an empty string."
+ SYNTAX OCTET STRING (SIZE(0..45))
+
+
+OstCosTrustType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "CoS trust type enumeration.
+
+ Green traffic is marked with low drop precedence and yellow
+ traffic is marked with high drop precedence.
+
+ cosTrust(1) Trust frame. The frames priority
+ determines the egress class.
+
+ cosUsePri(2) Use the priority ostCosPriority for the
+ frame. The frame will egress with ostCosPriority
+ priority and ostCosPrirority determines the
+ egress class.
+
+ cosUseClass(3) Use the class ostCosClass for the frame.
+ The frame will egress with the frames
+ priority and the ostCosClass egress class.
+
+ cosUsePriClass(4) Use the priority ostCosPriority and class
+ ostCosClass for the frame. The frames will
+ egress with ostCosPri and ostCosClass egress
+ class.
+
+ cosGreenYellow(5) Use ostCosGreenPriority and ostCosGreenClass for
+ green traffic. Use ostCosYellowPriority and
+ ostCosYellowClass for yellow traffic.
+ "
+ SYNTAX INTEGER {
+ cosTrust (1),
+ cosUsePri (2),
+ cosUseClass (3),
+ cosUsePriClass (4),
+ cosGreenYellow (5)
+ }
+
+
+OstEgressSchedulingProfileIndexType ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A value that uniquely identifies an Egress Scheduling Profile.
+
+ The valid values are 1 to X, where X is the maximum supported profile.
+ The maximum value for X for the GM4 is 4.
+ "
+ SYNTAX Unsigned32 (1..8)
+
+
+OstEgressQueueIndexType ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A value that uniquely identifies an Egress Queue.
+
+ The valid values are 1 to X, where X is the maximum supported profile.
+ The maximum value for X for the GM4 is 4.
+ "
+ SYNTAX Unsigned32 (1..8)
+
+
+OstElpsProtectType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents the ELPS protection type. The value can be one
+ of the following:
+
+ e1plus1UniNoAps(1) 1 unidirectional without APS communication
+ e1plus1UniAps(2) 1 unidirectional switching with APS communication
+ e1plus1BiAps(3) 1 bidirectional w/APS communication
+ e1to1(4) 1:1 bidirectional w/APS communication
+ notAvailable(5) Protect Type is unknown or not available, value returned
+ for status read, not allowed to write
+ "
+ SYNTAX INTEGER {
+ e1plus1UniNoAps (1),
+ e1plus1UniAps (2),
+ e1plus1BiAps (3),
+ e1to1 (4),
+ notAvailable (5)
+ }
+
+
+OstElpsRequestStates ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents the current request/state of either the local or
+ remote (partner) ELPS instance. The value can be one of the following:
+
+ noRequest(0) No Request (NR), lowest priority
+ doNotRevert(1) Do Not Revert (DNR)
+ revertRequest(2) Revert request (RR)
+ exercise(4) Exercise APS protocol (EXER)
+ waitToRestore(5) Wait to restore (WTR)
+ manualSwitchWorking(6) Manual swtich to working (MS-W)
+ manualSwitch(7) Manual switch (MS)
+ signalDegrade(9) Signal degrade (SD)
+ signalFailWorking(11) Signal fail for working (SF)
+ forcedSwitch(13) Forced switch (FS)
+ signalFailProtection(14) Signal fail for protection (SF-P)
+ lockoutProtection(15) Lock of protection (LO), highest priority
+ notAvailable(16) Status is unknown or not available, value returned
+ for status read, not allowed to write
+ "
+ SYNTAX INTEGER {
+ noRequest (0),
+ doNotRevert (1),
+ revertRequest (2),
+ exercise (4),
+ waitToRestore (5),
+ manualSwitchWorking (6),
+ manualSwitch (7),
+ signalDegrade (9),
+ signalFailWorking (11),
+ forcedSwitch (13),
+ signalFailProtection (14),
+ lockoutProtection (15),
+ notAvailable (16)
+ }
+
+
+OstElpsSignalStates ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents the requested or bridged signal for either
+ the local or remote (partner) ELPS instance. The value can be one of
+ the following:
+
+ nullSignal(0) Null signal. This indicates the signal that
+ the near-end requests be carried over the
+ protection path
+ normalSignal(1) Normal traffic signal. This indicates the
+ signal that is bridged onto the protection
+ path.
+ notAvailable(2) Protect Type is unknown or not available, value
+ returned for status read, not allowed to write
+ "
+ SYNTAX INTEGER {
+ nullSignal (0),
+ normalSignal (1),
+ notAvailable (2)
+ }
+
+
+OstErpsLinkState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents the current port link state. This is a
+ function that indicates whether the current port is linked.
+ The value can be one of the following:
+
+ na(0) Not Applicable, port state is unknown
+ up(1) Port is linked and capable of passing traffic
+ down(2) Port is not linked and is not capable of
+ passing traffic
+ "
+ SYNTAX INTEGER {
+ na(0),
+ up(1),
+ down(2)
+ }
+
+
+OstErpsPortState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents the current forwarding state of the port.
+ The value can be one of the following:
+
+ na(0) Not Applicable, port state is unknown
+ forward(1) Port is in the forwarding state
+ blocked(2) Port is in the blocked state
+ "
+ SYNTAX INTEGER {
+ na(0),
+ forward(1),
+ blocked(2)
+ }
+
+
+OstErpsPortType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents the Ring Port type. The value can be one of the
+ following:
+
+ rp0(1) Ring Port 0
+ rp1(2) Ring Port 1
+ "
+ SYNTAX INTEGER {
+ rp0(1),
+ rp1(2)
+ }
+
+
+OstErpsRingStates ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents the current request/state of either the local or
+ remote (partner) ERPS instance. The value can be one of the following:
+
+ noRequest(0) No Request (NR), local, lowest priority
+ rapsNr(1) Ring APS (R-APS) No Request (NR), remote
+ rapsNrRb(2) Ring APS (R-APS) No Request (NR), RPL Blocked (RB), remote
+ wtbRunning(3) Wait to Block (WTB) running, local
+ wtbExpires(4) Wait to Block (WTB) expires, local
+ wtrRunning(5) Wait to Restore (WTR) running, local
+ wtrExpires(6) Wait to Restore (WTR) expires, local
+ manualSwitch(7) Manual Switch (MS), local
+ rapsManualSwitch(8) Ring APS (R-APS) Manual Switch (MS), remote
+ rapsSignalFail(9) Ring APS (R-APS) Signal Fail (SF), remote
+ localClearSignalFail(10) Local clear Signal Fail (SF), local
+ localSignalFail(11) Local Signal Fail (SF), local
+ rapsForcedSwitch(12) Ring APS (R-APS) Forced Switch (FS), remote
+ forcedSwtich(13) Forced Switch (FS), local
+ clear(14) Clear, local
+ "
+ REFERENCE
+ "[ITU-T G.8032] Table 10-1"
+ SYNTAX INTEGER {
+ noRequest (0),
+ rapsNr (1),
+ rapsNrRb (2),
+ wtbRunning (3),
+ wtbExpires (4),
+ wtrRunning (5),
+ wtrExpires (6),
+ manualSwitch (7),
+ rapsManualSwitch (8),
+ rapsSignalFail (9),
+ localClearSignalFail (10),
+ localSignalFail (11),
+ rapsForcedSwitch (12),
+ forcedSwtich (13),
+ clear (14)
+ }
+
+
+OstErpsRingStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents the current ring status. This is state machine node
+ state value for the ERPS instance. The value can be one of the
+ following:
+
+ initializing(1) State machine initialization
+ idle(2) Idle State (A)
+ protection(3) Protection (B)
+ manualSwitch(4) Manual Switch (C)
+ forcedSwitch(5) Forced Switch (D)
+ pending(6) Pending (E)
+ "
+ REFERENCE
+ "[ITU-T G.8032] Table 10-2"
+ SYNTAX INTEGER {
+ initializing (1),
+ idle (2),
+ protection (3),
+ manualSwitch (4),
+ forcedSwitch (5),
+ pending (6)
+ }
+
+
+OstErrorString ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "The SNMP error string for further definition of a SNMP error."
+ SYNTAX OCTET STRING (SIZE(0..255))
+
+
+OstEvcNameString ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "An EVC name."
+ SYNTAX OCTET STRING (SIZE(1..45))
+
+
+OstEvcNameStringOrNone ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "An EVC name or an empty string."
+ SYNTAX OCTET STRING (SIZE(0..45))
+
+
+OstFileNameString ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "A internal file name."
+ SYNTAX OCTET STRING (SIZE(1..45))
+
+
+OstFingerprintString ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "The fingerprint value for SSH protocol."
+ SYNTAX OCTET STRING (SIZE(1..64))
+
+
+OstFloatValue ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "Floating point data type as represented in an octet string.
+ Legal values and precision are indicated by the appropriate object.
+ Only numbers and the decimal place are legal digit values.
+
+ Example values:
+ 1000
+ 1500.05
+ 1545.25
+ "
+ SYNTAX OCTET STRING (SIZE(0..20))
+
+
+OstFrameCount64 ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Frame counter value."
+ SYNTAX Counter64
+
+
+OstFrameSizeList ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "
+ Denotes a list of one or more frame sizes.
+
+ 1. Frame sizes have a value from 64 to 10240 bytes for the GM3, GM4,
+ and GM4-PoE. Frame sizes have a value from 64 to 10240 bytes for
+ the XM5.
+
+ 2. Individual frame sizes are included when separated by a comma ','.
+
+ 3. A range of frame sizes is included when separated by '..'.
+
+ 4. A range of sizes ending in a colon and a value, i.e. start..end:value,
+ is the frame increment size for the next iteration (min value is 4)
+
+ 5. Ranges must be organized min size to max size, i.e. min..max
+
+ 6. Individual sizes can be mixed in any order
+
+ Example values:
+ 64
+ 64..1024:64
+ 64,128,256,512,1024,1280,1518,10000
+ "
+ SYNTAX OCTET STRING (SIZE(1..255))
+
+
+OstIndexIntegerNextFree ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "An integer which may be used as a new index in a table.
+
+ The special value of 0 indicates that no more new entries can
+ be created in the relevant table.
+
+ When a MIB is used for configuration, an object with this
+ SYNTAX always contains a legal value (if non-zero) for an
+ index that is not currently used in the relevant table. The
+ Command Generator (Network Management Application) reads this
+ variable and uses the (non-zero) value read when creating a
+ new row with an SNMP SET. When the SET is performed, the
+ Command Responder (agent) MUST determine whether the value is
+ indeed still unused; Two Network Management Applications may
+ attempt to create a row (configuration entry) simultaneously
+ and use the same value. If it is currently unused, the SET
+ succeeds and the Command Responder (agent) changes the value
+ of this object, according to an implementation-specific
+ algorithm. If the value is in use, however, the SET fails.
+ The Network Management Application MUST then re-read this
+ variable to obtain a new usable value.
+
+ An OBJECT-TYPE definition using this SYNTAX MUST specify the
+ relevant table for which the object is providing this
+ functionality.
+ "
+ SYNTAX Unsigned32 (0..16)
+
+
+OstIpPriorityList ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "Selects IP priority values. Valid values are from 0 to 63.
+ Format:
+ X selects a single PCP priority value
+ X..Y selects a range of PCP priority values, X to Y
+ X,Y selects PCP priority values seperated by a comma
+ Example values:
+ 0
+ 2..5
+ 0,2..5
+ "
+ SYNTAX OCTET STRING (SIZE(0..14))
+
+
+OstIpv6Addr ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x"
+ STATUS current
+ DESCRIPTION
+ "This data type is used to model the IPv6 address. This is a
+ binary string of up to 8 octets in network byte-order.
+ "
+ SYNTAX OCTET STRING (SIZE(16..16))
+
+
+OstIpAddr ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "This data type is used to model both IPv4 and IPv6 addresses. It
+ is a hexadecimcal octet string with separators between number groups:
+ either '.' for IPv4 or ':' for IPv6. The IP type is derived based upon
+ the format of the string. Valid IP addreses:
+ '192.168.1.220'
+ 'fe80:0000:0:0:1234:5678:abcd:efff'
+
+ "
+ SYNTAX OCTET STRING (SIZE(0..39))
+
+
+OstMhfCreation ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Indicates if the Management Entity can create MHFs.
+
+ The valid values are:
+ ostMHFdefault(2) MHFs can be created on this VID on any
+ Bridge port through which this VID can pass.
+ ostMHFexplicit(3) MHFs can be created for this VID only on
+ Bridge ports through which this VID can
+ pass, and only if a MEP is created at some
+ lower MD Level.
+ "
+ SYNTAX INTEGER {
+ ostMHFdefault (1),
+ ostMHFexplicit (2)
+ }
+
+
+OstMipdMethodOfCreation ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Indicates the method of how this Mip table entry was created
+ The valid values are:
+ ostExplicit(1) indicates the Mip was created explicitly
+ through a command.
+ ostImplicitMa(2) indicates the Mip was created implicitly
+ through the MA command.
+ ostImplicitMde(3) indicates the Mip was created implicitly
+ through the CFM default Md table.
+ ostExplicitImplicitMa(4) indicates the Mip was created both
+ implicitly and explicitly through the MA command.
+ "
+ SYNTAX INTEGER {
+ ostExplicit(1),
+ ostImplicitMa(2),
+ ostImplicitMde(3),
+ ostExplicitImplicitMa(4)
+ }
+
+
+OstModeType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The module Mode Type as AP, SP or neither.
+
+ normal(1) Not specifically AP or SP
+ ap(2) Access Provider
+ sp(3) Service Provider
+ "
+ SYNTAX INTEGER {
+ normal (1),
+ ap (2),
+ sp (3)
+ }
+
+
+OstModuleSingleIndex ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A value that uniquely identifies the chassis and slot in which the module is located.
+ Base 10 Format: CCSS where
+ CC is the chassis index, 1 to 99
+ SS is the slot index, 1 to 99"
+ SYNTAX Unsigned32 (101..9999)
+
+
+OstPcpPriorityList ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "Selects PCP priority values. Valid values are from 0 to 7.
+ Format:
+ X selects a single PCP priority value
+ X..Y selects a range of PCP priority values, X to Y
+ X,Y selects PCP priority values seperated by a comma
+ Example values:
+ 0
+ 2..5
+ 0,2..5
+ "
+ SYNTAX OCTET STRING (SIZE(0..14))
+
+
+OstPortClockType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that indicates the TDM port recovery state/mode.
+ "
+ SYNTAX INTEGER {
+ adaptiveIdle(1),
+ adaptiveAcqu(2),
+ adaptiveTrk1(3),
+ adaptiveTrk2(4),
+ holdOver(5),
+ coax(6),
+ internal(7),
+ line(8)
+ }
+
+
+OstPortList ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "Denotes a list of one or more ports, separated by comma characters, in the
+ form of an ASCII string, which is case insensitive.
+
+ Port Description
+ ---- ------------------
+ 1 Port 1
+ 2 Port 2
+ 3 Port 3
+ 4 Port 4
+ 5 Port 5
+ 6 Port 6
+ 7 Port 7
+ 8 Port 8
+ 9 Port 9
+ 10 Port 10
+ 11 Port 11
+ 12 Port 12
+ 13 Port 13
+ 14 Port 14
+ 15 Port 15
+ 16 Port 16
+ 17 Port 17
+ a backplane port A
+ b backplane port B
+ mgt1 management port 1
+ mgt2 management port 2
+ all includes all ports
+
+ Example: '1,2,a,mgt1'
+ "
+ SYNTAX OCTET STRING
+
+
+OstPortNumber ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "This object selects the port number for the specific test
+ instance that is configured.
+
+ This value is dependent upon actual product accessed. The port number
+ for a specific port can be determined by selecting the module type
+ and then the port that is accessed. A value of '0' indicates that
+ no port is defined.
+
+ Module Type P1 P2 P3 P4 P5 BP A BP B Mgt1 Mgt2
+ ----------------- --- --- --- --- --- ---- ---- ---- ----
+ 3-port plug-in 1 2 3 n/a n/a 4 5 6 7
+ 3-port standalone 1 2 3 n/a n/a n/a n/a 6 7
+ 2-port plug-in 1 2 n/a n/a n/a 3 4 5 6
+ 2-port standalone 1 2 n/a n/a n/a n/a n/a 5 6
+ 4-port 1 2 3 4 n/a 5 6 n/a n/a
+ 5-port 1 2 3 4 5 n/a n/a 6 7
+
+ For the 7 port module: Port 1 - Port 7 are ports 1 - 7 are the front
+ facing ports, port 8 is the dedicated management port, port 9 is Mgt1
+ and port 10 is Mgt2.
+
+ For the 16 port module: Port 1 - Port 16 are the customer facing
+ ports, port 17 is the dedicated management port, port 18 is Mgt1 and
+ port 19 is Mgt2.
+
+ Other values are undefined.
+ "
+ SYNTAX Unsigned32 (0..99)
+
+
+OstPortSingleIndex ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A value that uniquely identifies a module port, and the chassis and slot in
+ which the module is located.
+ Base 10 Format: CCSSPP where
+ CC is the chassis index, 1 to 99
+ SS is the slot index, 1 to 99
+ PP is the port index, 1 to 99"
+ SYNTAX Unsigned32 (10101..999999)
+
+
+OstPriority ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Priority setting."
+ SYNTAX Unsigned32 (0..7)
+
+
+OstProbeNameString ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "An EVC name."
+ SYNTAX OCTET STRING (SIZE(1..45))
+
+
+OstProfileNameString ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "A test profile name."
+ SYNTAX OCTET STRING (SIZE(1..45))
+
+
+OstTestResultType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that indicates the result of a test. The value can be one of
+ the following:
+
+ pass(1) Indicates the test has passed successfully
+ fail(2) Indicates the test has failed
+ oversubscribe(3) Indicates the test failed due to oversubscription
+ of a resource
+ "
+ SYNTAX INTEGER {
+ pass (1),
+ fail (2),
+ oversubscribe (3)
+ }
+
+
+OstTestStatusType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that indicates the status of the current test instance. The
+ value can be one of the following:
+
+ testNotStarted(1) Current test instance has not started yet,
+ not fully configured, or waiting for loop-up
+ testInProcess(2) Current test instance is currently running
+ testStopped(3) Current test instance has been stopped after running
+ for a period of time
+ testCompleted(4) Current test instance has completed
+ testInitializing(5) Current test is the process of starting, used to
+ restart a test in process, completed, or stopped
+ "
+ SYNTAX INTEGER {
+ testNotStarted (1),
+ testInProcess (2),
+ testStopped (3),
+ testCompleted (4),
+ testInitializing(5)
+ }
+
+
+OstUnsigned64 ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A non-negative 64-bit bit integer, without counter semantics, between 0
+ and 2^64-1 inclusive (0 to 18446744073709551615 decimal).
+
+ It can have a MAX-ACCESS of read-only or read-write.
+
+ SYNTAX is Counter64 for the encoding rules only.
+ "
+ SYNTAX Counter64
+
+
+OstUserNameString ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "A string that is used to identify a specific user."
+ SYNTAX OCTET STRING (SIZE(1..32))
+
+
+OstVlanId ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "The VLAN-ID that uniquely identifies a VLAN. This
+ is the 12-bit VLAN-ID used in the VLAN Tag header."
+ SYNTAX Integer32 (0..4095)
+
+
+OstVlanIdList ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "Denotes a list of one or more VLAN IDs.
+ VLAN IDs have a value of 0 to 4095.
+ Individual VLAN IDs are included when separated by a comma ','.
+ A range of VLAN IDs is included when separated by '..'.
+ An asterisk indicates untagged data.
+ 'rest' selects remaining VLAN IDs.
+ 'all' selects all VLAN IDs.
+ Example values:
+ 100,110
+ 100..110
+ 100,110,200..210
+ 100,110,200..210,500..510
+ "
+ SYNTAX OCTET STRING (SIZE(0..110))
+
+
+END
\ No newline at end of file |