diff options
Diffstat (limited to 'MIBS/packetlight/SL-MAIN-MIB')
| -rw-r--r-- | MIBS/packetlight/SL-MAIN-MIB | 1327 |
1 files changed, 1327 insertions, 0 deletions
diff --git a/MIBS/packetlight/SL-MAIN-MIB b/MIBS/packetlight/SL-MAIN-MIB new file mode 100644 index 0000000..75723fc --- /dev/null +++ b/MIBS/packetlight/SL-MAIN-MIB @@ -0,0 +1,1327 @@ +-- ***************************************************************** +-- Main Control Card MIB +-- ***************************************************************** + +SL-MAIN-MIB DEFINITIONS ::= BEGIN + +IMPORTS + Integer32, IpAddress, Opaque, Gauge32, + MODULE-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE, TimeTicks FROM SNMPv2-SMI + DisplayString, TruthValue, + RowStatus, TimeStamp, DateAndTime FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, + NOTIFICATION-GROUP FROM SNMPv2-CONF + InterfaceIndex FROM IF-MIB + PerfCurrentCount, PerfIntervalCount, + PerfTotalCount FROM PerfHist-TC-MIB + sitelight FROM SL-NE-MIB; + +slMain MODULE-IDENTITY + LAST-UPDATED "200008280000Z" + ORGANIZATION "PacketLight Networks Ltd." + CONTACT-INFO + "Omri_Viner@PacketLight.com" + DESCRIPTION + "This MIB module describes the Main Board" + ::= { sitelight 3 } + +-- The Main MIB consists of the following groups: +-- System Info +-- Authentication Table +-- Traps Table +-- Software Versions Table +-- Connections Info +-- Log Files Table +-- Configuration Files Table + +slmSys OBJECT IDENTIFIER ::= { slMain 1 } +slmAdmin OBJECT IDENTIFIER ::= { slMain 2 } +slmAuth OBJECT IDENTIFIER ::= { slMain 3 } +slmLogin OBJECT IDENTIFIER ::= { slMain 4 } +slmTrap OBJECT IDENTIFIER ::= { slMain 5 } +-- slmEntity OBJECT IDENTIFIER ::= { slMain 6 } +-- slmMpls OBJECT IDENTIFIER ::= { slMain 7 } +slmLogFile OBJECT IDENTIFIER ::= { slMain 8 } +slmConfigFile OBJECT IDENTIFIER ::= { slMain 9 } +-- slTopology OBJECT IDENTIFIER ::= { slMain 10 } +-- slClocks OBJECT IDENTIFIER ::= { slMain 11 } +slmChPass OBJECT IDENTIFIER ::= { slMain 12 } +-- slTests OBJECT IDENTIFIER ::= { slMain 13 } +-- slLed OBJECT IDENTIFIER ::= { slMain 14 } +-- slMplsPm OBJECT IDENTIFIER ::= { slMain 15 } +-- slEntityAps OBJECT IDENTIFIER ::= { slMain 16 } +slmLicense OBJECT IDENTIFIER ::= { slMain 17 } + +-- +-- Textual Conventions +-- + +UserLogin ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The User Login Type." + SYNTAX DisplayString (SIZE (1..20)) + +UserPassword ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The User Password Type." + SYNTAX DisplayString (SIZE (1..20)) + +UserCommunity ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The User Community Type." + SYNTAX DisplayString (SIZE (1..20)) + +SoftwareRevision ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The Software Revision Name." + SYNTAX DisplayString (SIZE (1..20)) + +AdminAccess ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The administration access level." + SYNTAX INTEGER { + none(0), -- User has no access rights + read(1), -- Report only and Retrieve user + readwrite(2), -- Change access + provisioning(3), -- User is allowed to create connections + admin(4), -- User admin priviledge + trap(5) -- SNMP v3 Trap only user + } + +-- The System Info + + +slmSysGatewayAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Gateway node IP Address." + ::= { slmSys 1 } + +slmSysSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnetwork Mask IP Address." + ::= { slmSys 2 } + +slmSysIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Node IP Address." + ::= { slmSys 3 } + +slmSysAlmAct OBJECT-TYPE + SYNTAX INTEGER (0..30) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Alarm Activation Time specified in Half-Seconds units. + Alarm will be considered active only if it + has been stable for that time." + ::= { slmSys 4 } + +slmSysAlmDeact OBJECT-TYPE + SYNTAX INTEGER (0..30) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Alarm Clearance Time specified in Half-Seconds units. + Alarm will be considered clear only if it + has been stable for that time." + ::= { slmSys 5 } + +slmSysAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + warmBoot(3), + coldBoot(4), + factoryBoot(5), + testing(6), + hotBoot(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Instruct the system to perform the boot + according to the specified type." + ::= { slmSys 6 } + +slmSysOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + testing(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational system state." + ::= { slmSys 7 } + +slmBoxSize OBJECT-TYPE + SYNTAX INTEGER { + half(1), + full(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The box size as was configured in the SEEP." + ::= { slmSys 8 } + +slmSysCalendarTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The system calendar time." + ::= { slmSys 9 } + +slmSysPmStartOfDay OBJECT-TYPE + SYNTAX INTEGER (0..23) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The time of day that marks the beginning of each 1-day interval + used in the performance monitoring parameters for all interfaces + in the NE. This time is on an hour boundary." + DEFVAL { 0 } -- Midnight, local time + ::= { slmSys 10 } + +slmSysActiveSwVersion OBJECT-TYPE + SYNTAX INTEGER { + swRevA(1), + swRevB(2), + swRevFtpStart(3), + swRevFtpEnd(4), + swRevAHot(5), + swRevBHot(6) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the active software version. This is the version that will + be loaded by rebooted cards. It is not legal to set this object + to the id of an illegal system software version. + swRevFtpStart(3) - is set by the NMS to signal the FTP start. + swRevFtpEnd(4) - is set by the NMS to signal the FTP completion. + swRevAHot(5) - means to change the active software version to A, + and to preform hot restart to all cards. + swRevBHot(6) - means to change the active software version to B, + and to preform hot restart to all cards. + Reading the object returns the current active software version." + ::= { slmSys 11 } + +slmSwRevTable OBJECT-TYPE + SYNTAX SEQUENCE OF SlmSwRevEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table keeps the information about the system + software revisions." + ::= { slmSys 12 } + +slmConfigSysUptime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of timer ticks at the last configuration command." + ::= { slmSys 13 } + +slmConfigSysSignalType OBJECT-TYPE + SYNTAX INTEGER { + sonet(1), + sdh(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies whether a SONET + or a SDH signal is used across this node. + This value is configured by the NMS." + ::= { slmSys 14 } + +slmRebootDelay OBJECT-TYPE + SYNTAX INTEGER (0..300) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of seconds to wait before reboot. + When this number equal to 0 the reboot should occur immediately. + After the reboot command is initiated, the value of this object + decrements accordingly. + Initially, the object value is 0. + It is also possible to change this value after starting the reboot + process. + Getting the value 0 means that there is no + pending reboot process in the background." + ::= { slmSys 16 } + +slmVcatDelay OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of the VCAT delay as was read from the SEEP." + ::= { slmSys 17 } + +slmTid OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..20)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The SL TL1 name." + ::= { slmSys 18 } + +slmPsuNumber OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Let the NMS to configure the number of PSU in the system. + If this number mismatch the reality, a mismatch alarm is declared." + ::= { slmSys 19 } + +slmOemType OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value tells the NMS the type of the OEM. + This value is read from the SEEP." + ::= { slmSys 20 } + +slmSysName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value is the shadow of the sysName object." + ::= { slmSys 21 } + +slmSysLocation OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value is the shadow of the sysLocation object." + ::= { slmSys 22 } + +slmSysResetPm OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Writing 1 to this object reset the system PM counters." + ::= { slmSys 23 } + +slmSysUplinkRate OBJECT-TYPE + SYNTAX INTEGER { + up100(1), -- FE + up1000(2) -- GbE + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to configure the rate of the Uplink. + The configured rate applies to both Uplink ports." + ::= { slmSys 24 } + +slmSysChassisId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to configure the chassis-id. + Node with the same value are considered to be stacked." + ::= { slmSys 25 } + +slmSysNetworkPrefix OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to configure the Network Prefix. + The prefix is used when the IP address of the node is + assigned automatically. + The automatic IP address of the node has the form A.x.y.z + where x.y.z is the last 3 bytes of the + MAC address 00:05:fd:x:y:z of the box. + The A is the assigned Network Prefix. + For example if the A is 10 and the MAC address is + 00:05:fd:f6:55:11 the automatic IP of the node shall be + 10.253.85.17." + ::= { slmSys 26 } + +slmSysLanIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Node LAN IP Address." + ::= { slmSys 27 } + +slmSysLanSubnetAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Node LAN Subnet Address." + ::= { slmSys 28 } + +slmPmAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value tells the NMS if the PM support is available. + The value is taken from the SEEP and can not be changed." + ::= { slmSys 29 } + +slmPortsNumber OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ports in the system. + The value is taken from the SEEP." + ::= { slmSys 30 } + +slmEdfaNumber OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of EDFA units in the system. + The value is taken from the SEEP." + ::= { slmSys 31 } + +slmMuxNumber OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of MUX units in the system. + The value is taken from the SEEP." + ::= { slmSys 32 } + +slmOpticalSwitchExist OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Should an Optical Switch unit exist in the system. + The value is taken from the SEEP." + ::= { slmSys 33 } + +slmReadCommunity OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The SNMP read-only community. + This object should be accessible only by the Admin users of the Web." + ::= { slmSys 34 } + +slmWriteCommunity OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The SNMP read-write community. + This object should be accessible only by the Admin users of the Web." + ::= { slmSys 35 } + +slmSysEffectiveSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Effective Management subnetwork mask IP Address." + ::= { slmSys 36 } + +slmSysEffectiveIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Effective Management IP Address." + ::= { slmSys 37 } + +slmSysLanEffectiveIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Effective LAN IP Address." + ::= { slmSys 38 } + +slmSysLanEffectiveSubnetAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Effective LAN subnetwork mask address." + ::= { slmSys 39 } + +slmSysGatewayEffectiveIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Effective Gateway IP Address." + ::= { slmSys 40 } + +slmSysMode OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "System Mode configuration (this object applies to muxponder)." + ::= { slmSys 41 } + +slmSysTrapFormat OBJECT-TYPE + SYNTAX INTEGER { + fullIfIndex(1), -- + portIfIndex(2) -- HPOV and SNMPc + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The format of the sent trap: + 1 - the full ifIndex is sent. + 2 - only the port number part of the ifIndex is sent." + ::= { slmSys 42 } + +slmSysTemperature OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The temperature of the PL device in Celsius." + ::= { slmSys 43 } + +slmNetworkMode OBJECT-TYPE + SYNTAX INTEGER { + routing(1), -- Layer 3 Routing is required between the LAN to the OSC + switching(2) -- Layer 2 switching is required between the LAN and OSC + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "1 - means that the LAN is define on a different vlan than the MNG ports. + 2 - means that the LAN is on the same vlan and the MNG ports" + ::= { slmSys 44 } + +slm40GConf OBJECT-TYPE + SYNTAX INTEGER { + g40(0), -- Zero 40G ports + g41(1), -- Single 40G Port 1 + g42(2), -- Single 40G Port 2 + g43(3), -- Dual 40G ports + g100(100) -- 40G not supported (taken from the SEEP) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "g40(0) - No 40G ports (service ports 3..10 are disabled) + g41(1) - Single 40G Port 1 (service ports 7,8,9,10 are disabled) + g42(2) - Single 40G Port 2 (service ports 3,4,5,6 are disabled) + g43(3) - Dual 40G ports" + ::= { slmSys 45 } + +slmRstpEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable the RSTP protocol. + Defalut value is TRUE." + ::= { slmSys 46 } + +slmTopologyEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable the topology discovery protocol. + Defalut value is TRUE." + ::= { slmSys 47 } + +slmAdminCommunity OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The SNMP admin community. + This object should be accessible only by the Admin users of the Web." + ::= { slmSys 48 } + +slmTrapCommunity OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The SNMP v1/v2c trap community. + This object should be accessible only by the Admin users of the Web." + ::= { slmSys 49 } + +slmSysSnmpVersion OBJECT-TYPE + SYNTAX INTEGER { + v3Only(3), -- V3 Only + v1v2v3(4) -- V1, V2c, V3 + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The format of the sent trap: + 3 - allow only SNMPv3 pdus. + 4 - allow all pdus (coexistance mode)." + ::= { slmSys 50 } + +slmSysEncryptionCapability OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), -- No Encryption + enabled(2) -- Encryption Supported + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The encryption capability: + 1 - No Encryption. + 2 - Encryption Supported." + ::= { slmSys 51 } + +-- +-- Software Revision Table +-- + +slmSwRevEntry OBJECT-TYPE + SYNTAX SlmSwRevEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry exist per system revsion type (A or B)." + INDEX { slmSwRevDirectory } + ::= { slmSwRevTable 1 } + +SlmSwRevEntry ::= + SEQUENCE { + slmSwRevDirectory INTEGER, + slmSwRevStatus INTEGER, + slmSwRevName SoftwareRevision, + slmSwRevDate DateAndTime + } + +slmSwRevDirectory OBJECT-TYPE + SYNTAX INTEGER { + swRevDirA(1), + swRevDirB(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The directory name A or B of this system software + revision." + ::= { slmSwRevEntry 1 } + +slmSwRevStatus OBJECT-TYPE + SYNTAX INTEGER { + valid(1), + invalid(2), + copyingToStandby(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the system software directory content. + The value valid(1) means that the data of this entry is + valid and that the software is loaded correctly and is + currently used. + The value copyingToStandby(3) means that the SW is currently + being copied to the Standby Switch. During this period + the NMS is not allowed to upgrade the SW version. This value + is applicable only to the Standby software version. + The value invalid(2) means otherwise. This value is applicable + only to the Standby software version." + ::= { slmSwRevEntry 2 } + +slmSwRevName OBJECT-TYPE + SYNTAX SoftwareRevision + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The identification string of the system software revision. + This value is taken from the content of the system software + configuration data that is downloded with the rest of the + software files." + ::= { slmSwRevEntry 3 } + +slmSwRevDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The release date of the system software revision. + This value is taken from the content of the system software + configuration data that is downloded with the rest of the + software files." + ::= { slmSwRevEntry 4 } + +-- The admin table +-- +-- This table is used to store per each authorised user +-- its corresponding access level. +-- This table may be accessed and changed only by the system +-- administrator. +-- The table is used by the GNE during the login session +-- to return the user its community string according to +-- its access level. +-- The initial table contains one entry with: +-- Login='admin', Password='root', Access=admin(3) +-- At least one entry with Access=admin(3) should remain in +-- the table. +-- + +slmAdminTable OBJECT-TYPE + SYNTAX SEQUENCE OF SlmAdminEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The admin table is used to supply the access + level for the user login." + ::= { slmAdmin 1 } + +slmAdminEntry OBJECT-TYPE + SYNTAX SlmAdminEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry exist per user." + INDEX { slmAdminLogin } + ::= { slmAdminTable 1 } + +SlmAdminEntry ::= + SEQUENCE { + slmAdminLogin UserLogin, + slmAdminPassword UserPassword, + slmAdminRowStatus RowStatus, + slmAdminAccess AdminAccess, + slmSnmpv3Auth INTEGER, + slmSnmpv3Priv INTEGER, + slmSnmpv3Password UserPassword + } + +slmAdminLogin OBJECT-TYPE + SYNTAX UserLogin + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The user login." + ::= { slmAdminEntry 3 } + +slmAdminPassword OBJECT-TYPE + SYNTAX UserPassword + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The user password." + ::= { slmAdminEntry 4 } + +slmAdminRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create and delete rows in the + slmAdminTable." + ::= { slmAdminEntry 5 } + +slmAdminAccess OBJECT-TYPE + SYNTAX AdminAccess + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The user access level." + ::= { slmAdminEntry 6 } + +slmSnmpv3Auth OBJECT-TYPE + SYNTAX INTEGER { + noaccess(1), -- User has no access rights + noauth(2), -- No Auth + md5(3), -- MD5 + sha(4), -- HMAC-SHA + sha224(5), -- SHA-224 + sha256(6), -- SHA-256 + sha384(7), -- SHA-384 + sha512(8) -- SHA-512 + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The user SNMP v3 authentication mode." + ::= { slmAdminEntry 7 } + +slmSnmpv3Priv OBJECT-TYPE + SYNTAX INTEGER { + noaccess(1), -- User has no access rights + nopriv(2), -- No Priv + des(3), -- CBC-DES + aes(4), -- AES-128 + des3(5), -- CBC-DES3 + aes192(6), -- AES-192 + aes256(7) -- AES-256 + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The user SNMP v3 privacy mode." + ::= { slmAdminEntry 8 } + +slmSnmpv3Password OBJECT-TYPE + SYNTAX UserPassword + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SNMP v3 Password" + ::= { slmAdminEntry 9 } + +-- The authentication table +-- +-- This table is used to retrieve a community string +-- according to the user login and password +-- The rows of the table are temporary and used +-- to avoid access to the data by more than one user at a time. +-- After the completion of the operation the entry is +-- erased. +-- + +slmAuthTable OBJECT-TYPE + SYNTAX SEQUENCE OF SlmAuthEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The authentication table is used + for creating authentication requests." + ::= { slmAuth 1 } + +slmAuthEntry OBJECT-TYPE + SYNTAX SlmAuthEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry is used to compute the slmAuthCommunity based + on the indexes Login and Password. Note that the table contains + no data, and when using GetNext it apears to be empty. + To compute the community the NMS should Get the field + slmAuthCommunity with the corresponding indexes." + INDEX { slmAuthLogin, slmAuthPassword } + ::= { slmAuthTable 1 } + +SlmAuthEntry ::= + SEQUENCE { + slmAuthLogin UserLogin, + slmAuthPassword UserPassword, + slmAuthCommunity UserCommunity + } + +slmAuthLogin OBJECT-TYPE + SYNTAX UserLogin + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The user login." + ::= { slmAuthEntry 1 } + +slmAuthPassword OBJECT-TYPE + SYNTAX UserPassword + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The user password." + ::= { slmAuthEntry 2 } + +slmAuthCommunity OBJECT-TYPE + SYNTAX UserCommunity + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The user community name correponds to slmAuthLogin and + slmAuthPassword and which defines user'a access scope. + The value of this object is available for reading only + after the the first three colunms have been filled" + ::= { slmAuthEntry 3 } + +-- +-- The change password table +-- +-- This table is used to allow a user to change its password +-- + +slmChPassTable OBJECT-TYPE + SYNTAX SEQUENCE OF SlmChPassEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table is used for changing the user passowrd." + ::= { slmChPass 1 } + +slmChPassEntry OBJECT-TYPE + SYNTAX SlmChPassEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry is used to set the slmChPassNewPass. + Note that the table contains no data, and when + using GetNext it apears to be empty. + To change the password, the NMS should issue a SET + command with the new password while the two indexes + equal to the old user login and password." + INDEX { slmChPassLogin, slmChPassOldPass } + ::= { slmChPassTable 1 } + +SlmChPassEntry ::= + SEQUENCE { + slmChPassLogin UserLogin, + slmChPassOldPass UserPassword, + slmChPassNewPass UserPassword + } + +slmChPassLogin OBJECT-TYPE + SYNTAX UserLogin + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The user login." + ::= { slmChPassEntry 1 } + +slmChPassOldPass OBJECT-TYPE + SYNTAX UserPassword + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The user password." + ::= { slmChPassEntry 2 } + +slmChPassNewPass OBJECT-TYPE + SYNTAX UserPassword + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user password." + ::= { slmChPassEntry 3 } + + +-- Trap Destination Table +-- +-- This table defines the destination addresses for traps generated +-- from the device. This table maps a community to one or more trap +-- destination entries. +-- +-- The same trap will be sent to all destinations specified in the +-- entries that have the same trapDestCommunity as the eventCommunity +-- (as defined by RMON MIB). +-- + +slmTrapDestTable OBJECT-TYPE + SYNTAX SEQUENCE OF SlmTrapDestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of trap destination entries." + ::= { slmTrap 1 } + +slmTrapDestEntry OBJECT-TYPE + SYNTAX SlmTrapDestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry includes a destination IP address to which to send + traps for this community. An entry in the table is created by + the NMS. + In order to keep the entry in the table the management should + refresh the entry periodicaly. Otherwise it will be deleted + by the GNE after 5 minutes." + INDEX { slmTrapDestAddress } + ::= { slmTrapDestTable 1 } + +SlmTrapDestEntry ::= SEQUENCE { + slmTrapDestAddress Integer32, + slmTrapDestRowStatus RowStatus, + slmTrapDestCommunity UserCommunity, + slmTrapDestProtVersion INTEGER, + slmTrapUserLogin UserLogin, + slmTrapUserAccess AdminAccess, + slmTrapEnable TruthValue, + slmTrapPort INTEGER, + slmTrapDestIpAddress IpAddress +} + +slmTrapDestAddress OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A copy of slmTrapDestIpAddress represented as an integer. + Needed due to VxWorks failure to handle an ip address as a table index." + ::= { slmTrapDestEntry 1 } + +slmTrapDestRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create and delete rows in the + trapDestTable." + ::= { slmTrapDestEntry 2 } + +slmTrapDestCommunity OBJECT-TYPE + SYNTAX UserCommunity + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A community to which this destination address belongs. + This entry is associated with any eventEntries in the RMON + MIB whose value of eventCommunity is equal to the value of + this object. Every time an associated event entry sends a + trap due to an event, that trap will be sent to each + address in the trapDestTable with a trapDestCommunity equal to + eventCommunity. + This object may not be modified if the associated + trapDestStatus object is equal to active(1)." + ::= { slmTrapDestEntry 3 } + +slmTrapDestProtVersion OBJECT-TYPE + SYNTAX INTEGER { + snmpVer1(1), + snmpVer2(2), + snmpVer3(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SNMP version of the traps which this manager expects to receive." + DEFVAL { snmpVer2 } + ::= { slmTrapDestEntry 4 } + +slmTrapUserLogin OBJECT-TYPE + SYNTAX UserLogin + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The user login. This is used to describe to the manager + the current active login sessions. The NMS should read + this value periodicaly in order to refresh its entry, otherwise + the entry will be deleted by the GNE after a timeout of 5 minutes." + ::= { slmTrapDestEntry 5 } + +slmTrapUserAccess OBJECT-TYPE + SYNTAX AdminAccess + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The user access." + ::= { slmTrapDestEntry 6 } + +slmTrapEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "TRUE - means that that the alarms are allowed. + FALSE - means that all alarms should not be sent for this session." + ::= { slmTrapDestEntry 7 } + +slmTrapPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination port for to send the trap. + The default value is 162." + ::= { slmTrapDestEntry 8 } + +slmTrapDestIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The address to send traps on behalf of this entry. + This object may not be modified if the associated + slmTrapDestStatus object is equal to active(1)." + ::= { slmTrapDestEntry 9 } + + +-- Trap Log Table +-- +-- This table keeps the log of the sent traps +-- + +slmTrapLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF SlmTrapLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of trap log entries." + ::= { slmTrap 2 } + +slmTrapLogEntry OBJECT-TYPE + SYNTAX SlmTrapLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table keeps the log of a single trap." + INDEX { slmTrapLogId } + ::= { slmTrapLogTable 1 } + +SlmTrapLogEntry ::= SEQUENCE { + slmTrapLogId Gauge32, + slmTrapLogName OCTET STRING, + slmTrapLogTimeStamp TimeTicks, + slmTrapLogParam1 OCTET STRING, + slmTrapLogParam2 OCTET STRING, + slmTrapLogParam3 OCTET STRING, + slmTrapLogParam4 OCTET STRING, + slmTrapLogParam5 OCTET STRING, + slmTrapLogParam6 OCTET STRING +} + +slmTrapLogId OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The trap log id. The id increments each time a new log + entry arrives." + ::= { slmTrapLogEntry 1 } + +slmTrapLogName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..80)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object id of the trap." + ::= { slmTrapLogEntry 2 } + +slmTrapLogTimeStamp OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The trap time stamp." + ::= { slmTrapLogEntry 3 } + +slmTrapLogParam1 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..80)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The first parameter of the trap." + ::= { slmTrapLogEntry 4 } + +slmTrapLogParam2 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..80)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The second parameter of the trap." + ::= { slmTrapLogEntry 5 } + +slmTrapLogParam3 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..80)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The third parameter of the trap." + ::= { slmTrapLogEntry 6 } + +slmTrapLogParam4 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..80)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The forth parameter of the trap." + ::= { slmTrapLogEntry 7 } + +slmTrapLogParam5 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..80)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The fifth parameter of the trap." + ::= { slmTrapLogEntry 8 } + +slmTrapLogParam6 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..80)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sixth parameter of the trap." + ::= { slmTrapLogEntry 9 } + + +-- +-- Other Traps +-- + +slmTrapSoftwareStatusChange NOTIFICATION-TYPE + OBJECTS { slmSwRevDirectory, slmSwRevStatus } + STATUS current + DESCRIPTION + "A slmTrapSoftwareStatusChange trap is sent when the + value of the slmSwRevStatus of one of the directories changes." + ::= { slmTrap 4 } + +slmTrapSysNameChange NOTIFICATION-TYPE + OBJECTS { slmSysName } + STATUS current + DESCRIPTION + "A slmTrapSysNameChange trap is sent when the + value of the slmSysName is changed." + ::= { slmTrap 5 } + +slmTrapSysLocationChange NOTIFICATION-TYPE + OBJECTS { slmSysLocation } + STATUS current + DESCRIPTION + "A slmTrapSysLocationChange trap is sent when the + value of the slmSysLocation is changed." + ::= { slmTrap 6 } + +-- +-- Syslog Destination Table +-- + +slmSyslogDestTable OBJECT-TYPE + SYNTAX SEQUENCE OF SlmSyslogDestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of syslog destination entries." + ::= { slmTrap 7 } + +slmSyslogDestEntry OBJECT-TYPE + SYNTAX SlmSyslogDestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry includes a destination IP addresses to which to send + log messages." + INDEX { slmSyslogDestAddress } + ::= { slmSyslogDestTable 1 } + +SlmSyslogDestEntry ::= SEQUENCE { + slmSyslogDestAddress Integer32, + slmSyslogDestRowStatus RowStatus, + slmSyslogLevel INTEGER, + slmSyslogPort INTEGER, + slmSyslogDestIpAddress IpAddress +} + +slmSyslogDestAddress OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A copy of slmSyslogDestTable represented as an integer. + Needed due to VxWorks failure to handle an ip address as a table index." + ::= { slmSyslogDestEntry 1 } + +slmSyslogDestRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create and delete rows in the slmSyslogDestTable." + ::= { slmSyslogDestEntry 2 } + +slmSyslogLevel OBJECT-TYPE + SYNTAX INTEGER { + traps(1), -- send traps only + log(2), -- send all log messages + debug(3) -- send also debug meesages + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The level of log messages which this manager expects to receive." + ::= { slmSyslogDestEntry 3 } + +slmSyslogPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination port for to send the log message. + The default value is 514." + ::= { slmSyslogDestEntry 4 } + +slmSyslogDestIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The address to send log messages on behalf of this entry." + ::= { slmSyslogDestEntry 5 } + +-- +-- License Table +-- + +slmLicenseTable OBJECT-TYPE + SYNTAX SEQUENCE OF SlmLicenseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of License entries." + ::= { slmLicense 1 } + +slmLicenseEntry OBJECT-TYPE + SYNTAX SlmLicenseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table correspond to installed license." + INDEX { slmLicenseIndex } + ::= { slmLicenseTable 1 } + +SlmLicenseEntry ::= SEQUENCE { + slmLicenseIndex INTEGER, + slmLicenseExpiration INTEGER, + slmLicenseId DisplayString +} + +slmLicenseIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The license index." + ::= { slmLicenseEntry 1 } + +slmLicenseExpiration OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of seconds to expiration. + Value -1 for permanent." + ::= { slmLicenseEntry 2 } + +slmLicenseId OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..80)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The license text" + ::= { slmLicenseEntry 3 } + +END |