diff options
Diffstat (limited to 'MIBS/radwin')
| -rw-r--r-- | MIBS/radwin/RADWIN-MIB-WINLINK1000 | 4271 |
1 files changed, 4271 insertions, 0 deletions
diff --git a/MIBS/radwin/RADWIN-MIB-WINLINK1000 b/MIBS/radwin/RADWIN-MIB-WINLINK1000 new file mode 100644 index 0000000..cf28218 --- /dev/null +++ b/MIBS/radwin/RADWIN-MIB-WINLINK1000 @@ -0,0 +1,4271 @@ +-- +-- RADWIN Management Information Base (MIB) +-- Generated 01/05/16 14:23:32 Version: 10.2.40_b9653 +-- + RADWIN-MIB-WINLINK1000 DEFINITIONS ::= BEGIN + + IMPORTS + enterprises, IpAddress, Counter, Gauge, TimeTicks + FROM RFC1155-SMI + OBJECT-TYPE + FROM RFC-1212 + DisplayString, ifIndex + FROM RFC1213-MIB + TRAP-TYPE + FROM RFC-1215; + + + radwin OBJECT IDENTIFIER ::= { enterprises 4458 } + winlink1000 OBJECT IDENTIFIER ::= { radwin 1000 } + + -- ########################################################### + -- ODU + -- ########################################################### + + winlink1000Odu OBJECT IDENTIFIER ::= { winlink1000 1 } + + -- ########################################################### + -- ODU Admin + -- ########################################################### + + winlink1000OduAdmin OBJECT IDENTIFIER ::= { winlink1000Odu 1 } + + winlink1000OduAdmProductType OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU configuration description." + ::= { winlink1000OduAdmin 1 } + + winlink1000OduAdmHwRev OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU Hardware Version." + ::= { winlink1000OduAdmin 2 } + + winlink1000OduAdmSwRev OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU Software Version." + ::= { winlink1000OduAdmin 3 } + + winlink1000OduAdmLinkName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Link Name. A change is effective immediately." + ::= { winlink1000OduAdmin 4 } + + winlink1000OduAdmResetCmd OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Reset Command. + A set command with a value of 3 will cause a device reset. + HBS only: A set command with a value of 4 will cause a device reset for the entire sector. + The read value is always 0." + ::= { winlink1000OduAdmin 5 } + + winlink1000OduAdmAddres OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU IP address. A change is effective after reset. + The parameter is kept for backward compatibility. + Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended." + ::= { winlink1000OduAdmin 6 } + + winlink1000OduAdmMask OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU Subnet Mask. A change is effective after reset. + The parameter is kept for backward compatibility. + Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended." + ::= { winlink1000OduAdmin 7 } + + winlink1000OduAdmGateway OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU default gateway. A change is effective after reset. + The parameter is kept for backward compatibility. + Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended." + ::= { winlink1000OduAdmin 8 } + + winlink1000OduAdmBroadcast OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This parameter is reserved for the Manager application provided with the product." + ::= { winlink1000OduAdmin 10 } + + -- ########################################################### + -- ODU Admin Hosts Table + -- ########################################################### + + winlink1000OduAdmHostsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduAdmHostsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Trap destinations table. Each trap destination is defined by an IP address and a UDP port. + Up to 10 addresses can be configured." + ::= { winlink1000OduAdmin 12 } + + winlink1000OduAdmHostsEntry OBJECT-TYPE + SYNTAX Winlink1000OduAdmHostsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Trap destinations table entry." + INDEX { winlink1000OduAdmHostsIndex } + ::= { winlink1000OduAdmHostsTable 1 } + + Winlink1000OduAdmHostsEntry ::= SEQUENCE { + winlink1000OduAdmHostsIndex + INTEGER, + winlink1000OduAdmHostsIp + IpAddress, + winlink1000OduAdmHostsPort + INTEGER, + winlink1000OduAdmHostsSecurityModel + INTEGER, + winlink1000OduAdmHostsUserName + DisplayString, + winlink1000OduAdmHostsPassword + DisplayString, + winlink1000OduAdmHostsIPv6 + DisplayString + } + + winlink1000OduAdmHostsIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Trap destinations table index." + ::= { winlink1000OduAdmHostsEntry 1 } + + winlink1000OduAdmHostsIp OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Trap destination IP address. A change is effective immediately." + ::= { winlink1000OduAdmHostsEntry 2 } + + winlink1000OduAdmHostsPort OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "UDP port of the trap destination. A change is effective immediately." + ::= { winlink1000OduAdmHostsEntry 3 } + + winlink1000OduAdmHostsSecurityModel OBJECT-TYPE + SYNTAX INTEGER { + snmpv1(1), + snmpv3(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Security model used for this trap generation." + ::= { winlink1000OduAdmHostsEntry 4 } + + winlink1000OduAdmHostsUserName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "User name used to generate the snmpv3 trap." + ::= { winlink1000OduAdmHostsEntry 5 } + + winlink1000OduAdmHostsPassword OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Password used to generate the snmpv3 trap." + ::= { winlink1000OduAdmHostsEntry 6 } + + winlink1000OduAdmHostsIPv6 OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Trap destination IPv6 address. A change is effective immediately." + ::= { winlink1000OduAdmHostsEntry 7 } + + winlink1000OduBuzzerAdminState OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This parameter controls the activation of the buzzer while the unit is in install mode. + A change is effective immediately. The valid values are: disabled (0), enabledAuto (1), enabledConstantly(2), advancedAuto (3)." + ::= { winlink1000OduAdmin 13 } + + winlink1000OduProductId OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This parameter is reserved for the Manager application provided with the product." + ::= { winlink1000OduAdmin 14 } + + winlink1000OduReadCommunity OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Read Community String. This parameter always returns ***** when retrieving its value. + It is used by the Manager application to change the Read Community String. + The SNMP agent accepts only encrypted values." + ::= { winlink1000OduAdmin 15 } + + winlink1000OduReadWriteCommunity OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Read/Write Community String. This parameter always returns ***** when retrieving its value. + It is used by the Manager application to change the Read/Write Community String. + The SNMP agent accepts only encrypted values." + ::= { winlink1000OduAdmin 16 } + + winlink1000OduTrapCommunity OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Trap Community String. This parameter is used by the Manager application to change the Trap Community String. + The SNMP agent accepts only encrypted values." + ::= { winlink1000OduAdmin 17 } + + winlink1000OduAdmSnmpAgentVersion OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Major version of the SNMP agent." + ::= { winlink1000OduAdmin 18 } + + winlink1000OduAdmRemoteSiteName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Remote site name. Returns the same value as sysLocation parameter of the remote site." + ::= { winlink1000OduAdmin 19 } + + winlink1000OduAdmSnmpAgentMinorVersion OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minor version of the SNMP agent." + ::= { winlink1000OduAdmin 20 } + + winlink1000OduAdmLinkPassword OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Link Password. This parameter always returns ***** when retrieving its value. + It is used by the Manager application to change the Link Password. + The SNMP agent accepts only encrypted values." + ::= { winlink1000OduAdmin 21 } + + winlink1000OduAdmSiteLinkPassword OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Site Link Password. This parameter always returns ***** when retrieving its value. + It is used by the Manager application to change the Link Password of the site. + The SNMP agent accepts only encrypted values." + ::= { winlink1000OduAdmin 22 } + + winlink1000OduAdmDefaultPassword OBJECT-TYPE + SYNTAX INTEGER { + default(1), + nonDefault(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This parameter indicates if the current Link Password is the default password." + ::= { winlink1000OduAdmin 23 } + + winlink1000OduAdmConnectionType OBJECT-TYPE + SYNTAX INTEGER { + directConnection(1), + indirectConnection(2), + unknown(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This parameter indicates if the Manager application is connected to the local ODU + or to the remote ODU over the air. A value of 'unknown' indicates community string mismatch." + ::= { winlink1000OduAdmin 24 } + + winlink1000OduAdmBackToFactorySettingsCmd OBJECT-TYPE + SYNTAX INTEGER { + withIP(1), + withoutIP(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Back to factory settings Command. A change is effective after reset. + The read value is always 0." + ::= { winlink1000OduAdmin 25 } + + winlink1000OduAdmIpParamsCnfg OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU IP address Configuration. The format is: |||" + ::= { winlink1000OduAdmin 26 } + + winlink1000OduAdmVlanID OBJECT-TYPE + SYNTAX INTEGER (0..4094) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "VLAN ID. Valid values are 1 to 4094. + Initial value is 0 meaning VLAN unaware." + ::= { winlink1000OduAdmin 27 } + + winlink1000OduAdmVlanPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "VLAN Priority. 0 is lowest priority, 7 is highest priority." + ::= { winlink1000OduAdmin 28 } + + winlink1000OduAdmSN OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU Serial Number" + ::= { winlink1000OduAdmin 29 } + + winlink1000OduAdmProductName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is the product name as it exists at EC" + ::= { winlink1000OduAdmin 30 } + + winlink1000OduAdmActivationKey OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Activates a general key." + ::= { winlink1000OduAdmin 31 } + + winlink1000OduAdmRmtPermittedOduType OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Mobile Application: permitted partner OduType." + ::= { winlink1000OduAdmin 32 } + + winlink1000OduAdmCpuID OBJECT-TYPE + SYNTAX INTEGER (0..64) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "CPU ID" + ::= { winlink1000OduAdmin 33 } + + winlink1000OduAdmOvrdCmd OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Ability to perform special command in the ODU." + ::= { winlink1000OduAdmin 34 } + + winlink1000OduAdmLinkMode OBJECT-TYPE + SYNTAX INTEGER { + pmpHbs (1), + pmpHsu (2), + pmpHsuHyb (3), + pmpHbsHyb (4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Unit PMP operation mode." + ::= { winlink1000OduAdmin 35 } + + winlink1000OduAdmActualConnectMode OBJECT-TYPE + SYNTAX INTEGER { + none (1), + ptp (2), + ptmp (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Unit connected as part to ptp or ptmp." + ::= { winlink1000OduAdmin 36 } + + winlink1000OduAdmAES256Support OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + supported (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "AES-256 security support indication." + ::= { winlink1000OduAdmin 37 } + + winlink1000OduAdmAES256State OBJECT-TYPE + SYNTAX INTEGER { + disabled (1), + enabled (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enable/Disable AES-256 security mode over the air link." + ::= { winlink1000OduAdmin 38 } + + winlink1000OduAdmAES256Status OBJECT-TYPE + SYNTAX INTEGER { + notOperating (1), + partiallyOperating (2), + operating (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "AES256 operating status" + ::= { winlink1000OduAdmin 39 } + + winlink1000OduAdmBatterySavingShutdownTime OBJECT-TYPE + SYNTAX INTEGER (0..1000) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Battery Saving Shutdown Time in minutes, 0 till battery run out, -1 if not supported." + ::= { winlink1000OduAdmin 40 } + + winlink1000OduAdmWiFiPowerMode OBJECT-TYPE + SYNTAX INTEGER { + undefined (1), + powerON (2), + powerOFF (3), + alwaysON (4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "WIFI unit power mode." + ::= { winlink1000OduAdmin 41 } + + winlink1000OduAdmShutdownTimer OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Shutdown Timer in seconds." + ::= { winlink1000OduAdmin 42 } + + winlink1000OduAdmGPSState OBJECT-TYPE + SYNTAX INTEGER { + undefined (1), + notSynchronized (2), + fixed (3), + shortCircuit (4), + faulty (5), + synchronized (6), + synchronizedGlonass (7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "GPS state" + ::= { winlink1000OduAdmin 43 } + + winlink1000OduAdmTemperatureC OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The temperature (Celsius) inside the Board." + ::= { winlink1000OduAdmin 44 } + + winlink1000OduAdmIPStackMode OBJECT-TYPE + SYNTAX INTEGER { + v4 (1), + v6 (2), + v4andv6 (3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP stack mode." + ::= { winlink1000OduAdmin 45 } + + winlink1000OduAdmIPv6ParamsCnfg OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU IPv6 address Configuration. The format is: |||" + ::= { winlink1000OduAdmin 46 } + + winlink1000OduAdmIPv6Address OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU IPv6 address." + ::= { winlink1000OduAdmin 47 } + + winlink1000OduAdmIPv6Prefix OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU IPv6 subnet mask." + ::= { winlink1000OduAdmin 48 } + + winlink1000OduAdmIPv6DefaultGateWay OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU IPv6 default gateway." + ::= { winlink1000OduAdmin 49 } + + winlink1000OduAdmPowerConsumption OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Power Consumption (mWatt)" + ::= { winlink1000OduAdmin 50 } + + -- ########################################################### + -- ODU Wifi + -- ########################################################### + + winlink1000OduAdmWifi OBJECT IDENTIFIER ::= { winlink1000OduAdmin 51 } + + winlink1000OduAdmWifiChannel OBJECT-TYPE + SYNTAX INTEGER (1..11) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Wifi Channel" + ::= { winlink1000OduAdmWifi 1 } + + winlink1000OduAdmWifiTxPower OBJECT-TYPE + SYNTAX INTEGER (11..15) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Wifi TX Power" + ::= { winlink1000OduAdmWifi 2 } + + winlink1000OduAdmWifiSSID OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Wifi SSID" + ::= { winlink1000OduAdmWifi 3 } + + winlink1000OduAdmWifiSecurityType OBJECT-TYPE + SYNTAX INTEGER { + open (1), + wep (2), + wpa2 (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Wifi Security type" + ::= { winlink1000OduAdmWifi 4 } + + winlink1000OduAdmWifiPassword OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Wifi Password" + ::= { winlink1000OduAdmWifi 5 } + + winlink1000OduAdmWifiNetwork OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Wifi Network" + ::= { winlink1000OduAdmWifi 6 } + + winlink1000OduAdmWifiRssi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Wifi RSSI" + ::= { winlink1000OduAdmWifi 7 } + + winlink1000OduAdmWifiStationMAC OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Wifi Station MAC" + ::= { winlink1000OduAdmWifi 8 } + + winlink1000OduAdmWifiRestart OBJECT-TYPE + SYNTAX INTEGER (1) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A set command with a value of 1 will cause a Wifi restart. + The read value is always 0." + ::= { winlink1000OduAdmWifi 9 } + + winlink1000OduAdmWifiApStatus OBJECT-TYPE + SYNTAX INTEGER { + off (1), + on (2), + connected (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Wifi AP Status" + ::= { winlink1000OduAdmWifi 10 } + + winlink1000OduAdmBsaOperationMode OBJECT-TYPE + SYNTAX INTEGER { + inactive (1), + hbsTracking (2), + hsuAlignment (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "BSA Operation Mode" + ::= { winlink1000OduAdmin 52 } + + winlink1000OduAdmMngConnection OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Management Connection" + ::= { winlink1000OduAdmin 53 } + + winlink1000OduAdm1588TCSupport OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + supported (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates that 1588TC license activated" + ::= { winlink1000OduAdmin 54 } + + winlink1000OduAdmSyncESupport OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + supported (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ndicates that SyncE license activated" + ::= { winlink1000OduAdmin 55 } + + winlink1000OduAdmRadioRev OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Radio Revision" + ::= { winlink1000OduAdmin 56 } + + winlink1000OduAdmProductRev OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Product Revision" + ::= { winlink1000OduAdmin 57 } + + winlink1000OduAdmPMPSUSupport OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + supported (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates that PMP SU license is activated" + ::= { winlink1000OduAdmin 58 } + + winlink1000OduAdmManagerDownloadURL OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This is the URL from which management tool can be downloaded" + ::= { winlink1000OduAdmin 59 } + + winlink1000OduAdmAntennaDescription OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The is a description of the antenna connected to the ODU" + ::= { winlink1000OduAdmin 60 } + + winlink1000OduAdmSwCapabilities OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is used to describe which Software Capabilities the current ODU supports" + ::= { winlink1000OduAdmin 61 } + + -- ########################################################### + -- ODU Service + -- ########################################################### + + winlink1000OduService OBJECT IDENTIFIER ::= { winlink1000Odu 2 } + + winlink1000OduSrvMode OBJECT-TYPE + SYNTAX INTEGER { + installMode (1), + normalMode (2), + slaveMode (3), + tempInstallMode (4), + inactiveMode (5) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "System mode. The only values that can be set are installMode and slaveMode; + normalMode reserved to the Manager application provided with the product. + A change is effective after link re-synchronization." + ::= { winlink1000OduService 1 } + + winlink1000OduSrvBridging OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Bridging Mode. Valid values are: disabled (0), enabled (1)." + ::= { winlink1000OduService 3 } + + -- ########################################################### + -- ODU Ring Topology + -- ########################################################### + + winlink1000OduServiceRingTopology OBJECT IDENTIFIER ::= { winlink1000OduService 4 } + + winlink1000OduSrvRingLinkMode OBJECT-TYPE + SYNTAX INTEGER { + independentLink (1), + nonRpl (2), + rpl (3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Mode of the link regarding ring topology." + ::= { winlink1000OduServiceRingTopology 1 } + + winlink1000OduSrvRingTopologySupported OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + supported (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Ring Topology, options are: supported, not supported" + ::= { winlink1000OduServiceRingTopology 2 } + + winlink1000OduSrvRingVlanIdTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduSrvRingVlanIdEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Ring VLAN IDs table." + ::= { winlink1000OduServiceRingTopology 3 } + + winlink1000OduSrvRingVlanIdEntry OBJECT-TYPE + SYNTAX Winlink1000OduSrvRingVlanIdEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "VLAN ID of the internal ring messages. Valid values are 1 to 4094. + Initial value is 0 meaning VLAN unaware." + INDEX { winlink1000OduSrvRingVlanIdIndex } + ::= { winlink1000OduSrvRingVlanIdTable 1 } + + Winlink1000OduSrvRingVlanIdEntry ::= SEQUENCE { + winlink1000OduSrvRingVlanIdIndex + INTEGER, + winlink1000OduSrvRingVlanId + INTEGER + } + + winlink1000OduSrvRingVlanIdIndex OBJECT-TYPE + SYNTAX INTEGER (0..3) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index of VLAN ID of the internal ring messages." + ::= { winlink1000OduSrvRingVlanIdEntry 1 } + + winlink1000OduSrvRingVlanId OBJECT-TYPE + SYNTAX INTEGER (0..4094) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "VLAN ID of the internal ring messages. Valid values are 1 to 4094. + Initial value is 0 meaning VLAN unaware." + ::= { winlink1000OduSrvRingVlanIdEntry 2 } + + + winlink1000OduSrvRingEthStatus OBJECT-TYPE + SYNTAX INTEGER { + unblocked(1), + blocked(2), + notApplicable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the Ethernet service blocking state of a Rings link" + ::= { winlink1000OduServiceRingTopology 4 } + + winlink1000OduSrvRingMaxAllowedTimeFromLastRpm OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Defines the minimal time (in ms) required for determination of ring failure." + ::= { winlink1000OduServiceRingTopology 5 } + + winlink1000OduSrvRingWTR OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Defines the minimal time (in ms) required for ring recovery." + ::= { winlink1000OduServiceRingTopology 6 } + -- ########################################################### + -- ODU QoS + -- ########################################################### + + winlink1000OduServiceQoS OBJECT IDENTIFIER ::= { winlink1000OduService 5 } + + winlink1000OduSrvQoSMode OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + notActive (2), + classVlan (3), + classDiffserv (4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Mode of QoS feature." + ::= { winlink1000OduServiceQoS 1 } + + winlink1000OduSrvQoSConfTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduSrvQoSConfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "QoS configuration table." + ::= { winlink1000OduServiceQoS 2 } + + winlink1000OduSrvQoSConfEntry OBJECT-TYPE + SYNTAX Winlink1000OduSrvQoSConfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "QoS configuration table." + INDEX { winlink1000OduSrvQoSConfIndex } + ::= { winlink1000OduSrvQoSConfTable 1 } + + Winlink1000OduSrvQoSConfEntry ::= SEQUENCE { + winlink1000OduSrvQoSConfIndex + INTEGER, + winlink1000OduSrvConfVlanQGroups + INTEGER, + winlink1000OduSrvConfDiffservQGroups + INTEGER, + winlink1000OduSrvConfQueMir + INTEGER, + winlink1000OduSrvConfQueWeight + INTEGER + } + + winlink1000OduSrvQoSConfIndex OBJECT-TYPE + SYNTAX INTEGER (0..3) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index of QoS Configuration." + ::= { winlink1000OduSrvQoSConfEntry 1 } + + winlink1000OduSrvConfVlanQGroups OBJECT-TYPE + SYNTAX INTEGER (0..7) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Frames classification according to VLAN Priority IDs." + ::= { winlink1000OduSrvQoSConfEntry 2 } + + winlink1000OduSrvConfDiffservQGroups OBJECT-TYPE + SYNTAX INTEGER (0..48) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Frames classification according to Diffserv." + ::= { winlink1000OduSrvQoSConfEntry 3 } + + winlink1000OduSrvConfQueMir OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Desired Private MIR." + ::= { winlink1000OduSrvQoSConfEntry 4 } + + winlink1000OduSrvConfQueWeight OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "QoS queueu's weights in percent." + ::= { winlink1000OduSrvQoSConfEntry 5 } + + winlink1000OduSrvQoSVlanQGroupsSetStr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Frames classification according to VLAN IDs string for set." + ::= { winlink1000OduServiceQoS 3 } + + winlink1000OduSrvQoSDiffservQGroupsSetStr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Frames classification according to Diffserv IDs string for set." + ::= { winlink1000OduServiceQoS 4 } + + winlink1000OduSrvQoSMaxRTQuePercent OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximal percent for RT & NRT queues." + ::= { winlink1000OduServiceQoS 5 } + + -- ########################################################### + -- ODU VLAN Configuration + -- ########################################################### + + winlink1000OduServiceVlan OBJECT IDENTIFIER ::= { winlink1000OduService 6 } + + winlink1000OduSrvVlanSupport OBJECT-TYPE + SYNTAX INTEGER { + notSupported (1), + supported(2), + available(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU Ethernet port VLAN support and configuration availability indication. + 1 - ODU VLAN Functionality Not Supported + 2 - ODU VLAN Functionality Supported + 3 - ODU VLAN Functionality Supported and Available" + ::= { winlink1000OduServiceVlan 1 } + + winlink1000OduSrvVlanIngressMode OBJECT-TYPE + SYNTAX INTEGER { + transparent (1), + untagAll (2), + filter (3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU Ethernet port ingress VLAN mode." + ::= { winlink1000OduServiceVlan 2 } + + winlink1000OduSrvVlanEgressMode OBJECT-TYPE + SYNTAX INTEGER { + transparent (1), + tag (2), + provider (3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU Ethernet port egress VLAN mode." + ::= { winlink1000OduServiceVlan 3 } + + winlink1000OduSrvEgressTag OBJECT-TYPE + SYNTAX INTEGER (0..40947) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU ethernet port egress VLAN tag. + Right most digit is Vlan priority (0-7), + other digits compose Vlan Id (2-4094)" + ::= { winlink1000OduServiceVlan 4 } + + winlink1000OduSrvEgressProviderTag OBJECT-TYPE + SYNTAX INTEGER (0..40947) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU ethernet port egress Provider VLAN tag. + Right most digit is Vlan priority (0-7), + other digits compose Vlan Id (2-4094)" + ::= { winlink1000OduServiceVlan 5 } + + winlink1000OduSrvVlanIngressAllowedVIDs OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU ethernet port VLAN IDs that will not be filtered on ingress. + w|w|w|w|w|w|w|w| ( where w = {0-4094} and w != 1 )" + ::= { winlink1000OduServiceVlan 6 } + + winlink1000OduSrvVlanDisable OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Disable VLAN functionality. The following values can be set: + 3 - Disable ODU & IDU VLAN Configurations." + ::= { winlink1000OduServiceVlan 7 } + + winlink1000OduServiceVlanProviderListTPIDstr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Holds the possible Provider TPIDs." + ::= { winlink1000OduServiceVlan 8 } + + -- ########################################################### + -- ODU Ethernet + -- ########################################################### + + winlink1000OduEthernet OBJECT IDENTIFIER ::= { winlink1000Odu 3 } + + winlink1000OduEthernetRemainingRate OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current Ethernet bandwidth in bps." + ::= { winlink1000OduEthernet 1 } + + -- ########################################################### + -- ODU Ethernet Interface Table + -- ########################################################### + + winlink1000OduEthernetIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduEthernetIfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ODU Ethernet Interface table." + ::= { winlink1000OduEthernet 2 } + + winlink1000OduEthernetIfEntry OBJECT-TYPE + SYNTAX Winlink1000OduEthernetIfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ODU Ethernet Interface table entry." + INDEX { winlink1000OduEthernetIfIndex } + ::= { winlink1000OduEthernetIfTable 1 } + + Winlink1000OduEthernetIfEntry ::= SEQUENCE { + winlink1000OduEthernetIfIndex + INTEGER, + winlink1000OduEthernetIfAddress + DisplayString, + winlink1000OduEthernetIfAdminStatus + INTEGER, + winlink1000OduEthernetIfOperStatus + INTEGER, + winlink1000OduEthernetIfFailAction + INTEGER, + winlink1000OduEthernetIf1588v2PTPEventRXRate + INTEGER, + winlink1000OduEthernetIf1588v2PTPEventTXRate + INTEGER + } + + winlink1000OduEthernetIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU Ethernet Interface Index." + ::= { winlink1000OduEthernetIfEntry 1 } + + winlink1000OduEthernetIfAddress OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU MAC address." + ::= { winlink1000OduEthernetIfEntry 5 } + + winlink1000OduEthernetIfAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + portAutoSense(1), + portAutoSense100Mbps(5), + forceHalfDuplex10Mbps(10), + forceFullDuplex10Mbps(11), + forceHalfDuplex100Mbps(15), + forceFullDuplex100Mbps(16), + forceFullDuplex1000Mbps(21), + disablePoePort(254), + disablePort(255) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Required state of the interface." + ::= { winlink1000OduEthernetIfEntry 6 } + + winlink1000OduEthernetIfOperStatus OBJECT-TYPE + SYNTAX INTEGER { + notConnected(1), + connectedHalfDuplex10Mbps(10), + connectedFullDuplex10Mbps(11), + connectedHalfDuplex100Mbps(15), + connectedFullDuplex100Mbps(16), + connectedHalfDuplex1000Mbps(20), + connectedFullDuplex1000Mbps(21), + unknown(65535) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current operational state of the interface." + ::= { winlink1000OduEthernetIfEntry 7 } + + winlink1000OduEthernetIfFailAction OBJECT-TYPE + SYNTAX INTEGER { + faNoAction(1), + faForceHalfDuplex10Mbps(10), + faForceFullDuplex10Mbps(11), + faDisablePort(255) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Failure action of the interface." + ::= { winlink1000OduEthernetIfEntry 8 } + + winlink1000OduEthernetIf1588v2PTPEventRXRate OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "For debug use" + ::= { winlink1000OduEthernetIfEntry 9 } + + winlink1000OduEthernetIf1588v2PTPEventTXRate OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "For debug use" + ::= { winlink1000OduEthernetIfEntry 10 } + + winlink1000OduEthernetNumOfPorts OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of ODU network interfaces." + ::= { winlink1000OduEthernet 3 } + + + winlink1000OduEthernetGbeSupported OBJECT-TYPE + SYNTAX INTEGER {notSupported(1), supported(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Supported Giga bit Ethernet in ODU." + ::= { winlink1000OduEthernet 4 } + + winlink1000OduEthernetSfpProperties OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Sfp port properties." + ::= { winlink1000OduEthernet 5 } + + -- ########################################################### + -- ODU Bridge + -- ########################################################### + + winlink1000OduBridge OBJECT IDENTIFIER ::= { winlink1000Odu 4 } + + -- ########################################################### + -- ODU Bridge Base + -- ########################################################### + + winlink1000OduBridgeBase OBJECT IDENTIFIER ::= { winlink1000OduBridge 1 } + + -- ########################################################### + -- ODU Bridge Ports Table + -- ########################################################### + + winlink1000OduBridgeBasePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduBridgeBasePortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ODU Bridge Ports table." + ::= { winlink1000OduBridgeBase 4 } + + winlink1000OduBridgeBasePortEntry OBJECT-TYPE + SYNTAX Winlink1000OduBridgeBasePortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ODU Bridge Ports table entry." + INDEX { winlink1000OduBridgeBasePortIndex } + ::= { winlink1000OduBridgeBasePortTable 1 } + + Winlink1000OduBridgeBasePortEntry ::= SEQUENCE { + winlink1000OduBridgeBasePortIndex + INTEGER, + winlink1000OduBridgeBaseIfIndex + INTEGER + } + + winlink1000OduBridgeBasePortIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU Bridge Port Number." + ::= { winlink1000OduBridgeBasePortEntry 1 } + + winlink1000OduBridgeBaseIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "IfIndex corresponding to ODU Bridge port." + ::= { winlink1000OduBridgeBasePortEntry 2 } + + -- ########################################################### + -- ODU Bridge Tp + -- ########################################################### + + winlink1000OduBridgeTp OBJECT IDENTIFIER ::= { winlink1000OduBridge 4 } + + winlink1000OduBridgeTpMode OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ODU bridge mode. + A change is effective after reset. Valid values: hubMode (0), bridgeMode (1)." + ::= { winlink1000OduBridgeTp 101 } + + -- ########################################################### + -- ODU Transparent Bridge Ports Table + -- ########################################################### + + winlink1000OduBridgeTpPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduBridgeTpPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ODU Transparent Bridge Ports table." + ::= { winlink1000OduBridgeTp 3 } + + winlink1000OduBridgeTpPortEntry OBJECT-TYPE + SYNTAX Winlink1000OduBridgeTpPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ODU Transparent Bridge Ports table entry." + INDEX { winlink1000OduBridgeTpPortIndex } + ::= { winlink1000OduBridgeTpPortTable 1 } + + Winlink1000OduBridgeTpPortEntry ::= SEQUENCE { + winlink1000OduBridgeTpPortIndex + INTEGER, + winlink1000OduBridgeTpPortInFrames + Counter, + winlink1000OduBridgeTpPortOutFrames + Counter, + winlink1000OduBridgeTpPortInBytes + Counter, + winlink1000OduBridgeTpPortOutBytes + Counter + } + + winlink1000OduBridgeTpPortIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU Transparent Bridge Port Number." + ::= { winlink1000OduBridgeTpPortEntry 1 } + + winlink1000OduBridgeTpPortInFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of frames received by this port." + ::= { winlink1000OduBridgeTpPortEntry 3 } + + winlink1000OduBridgeTpPortOutFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of frames transmitted by this port." + ::= { winlink1000OduBridgeTpPortEntry 4 } + + winlink1000OduBridgeTpPortInBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of bytes received by this port." + ::= { winlink1000OduBridgeTpPortEntry 101 } + + winlink1000OduBridgeTpPortOutBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of bytes transmitted by this port." + ::= { winlink1000OduBridgeTpPortEntry 102 } + + winlink1000OduBridgeConfigMode OBJECT-TYPE + SYNTAX INTEGER{ + enable (1), + disable (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU bridge configuration mode" + ::= { winlink1000OduBridgeTp 102 } + + -- ########################################################### + -- ODU Air + -- ########################################################### + + winlink1000OduAir OBJECT IDENTIFIER ::= { winlink1000Odu 5 } + + winlink1000OduAirFreq OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Installation Center Frequency. Valid values are product dependent. A change is effective after link re-synchronization." + ::= { winlink1000OduAir 1 } + + winlink1000OduAirDesiredRate OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS deprecated + DESCRIPTION + "Deprecated parameter, actual behavior is read-only. + Required Air Rate. For Channel Bandwidth of 20, 10, 5 MHz divide the value by 1, 2, 4 respectively." + ::= { winlink1000OduAir 2 } + + winlink1000OduAirSSID OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Reserved for the Manager application provided with the product. + The Sector ID in Point-To-Multi-Point systems." + ::= { winlink1000OduAir 3 } + + winlink1000OduAirTxPower OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Required Transmit power in dBm . This is a nominal value while the actual transmit power includes additional attenuation. + The min and max values are product specific. A change is effective immediately." + ::= { winlink1000OduAir 4 } + + winlink1000OduAirSesState OBJECT-TYPE + SYNTAX INTEGER { + sessionDown (1), + basicRate (2), + active (3), + installation (4), + scanning (5), + probing (6), + transmitting (7), + activeWithDefaultEncryptionKey (8), + installationWithDefaultEncryptionKey (9), + bitFailed (10), + activeWithVersionsMismatch (11), + installationWithVersionsMismatch (12), + inactive (13), + iduIncompatible (14), + spectrumAnalysis (15) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current Link State. The value is active (3) during normal operation." + ::= { winlink1000OduAir 5 } + + winlink1000OduAirMstrSlv OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This parameter indicates if the device was automatically selected into the radio link master or slave. + The value is undefined if there is no link. + The value is relevant only for point to point systems." + ::= { winlink1000OduAir 6 } + + winlink1000OduAirResync OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this parameter to 1 will cause the link to restart the synchronization process." + ::= { winlink1000OduAir 8 } + + -- ########################################################### + -- ODU Air Perf + -- ########################################################### + + winlink1000OduAirPerf OBJECT IDENTIFIER ::= { winlink1000OduAir 9 } + + winlink1000OduAirRxPower OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Received Signal Strength in dBm. Relevant only for point to point systems." + ::= { winlink1000OduAirPerf 1 } + + winlink1000OduAirTotalFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of radio frames." + ::= { winlink1000OduAirPerf 2 } + + winlink1000OduAirBadFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of received radio frames with CRC error. The value is relevant only for point to point systems ." + ::= { winlink1000OduAirPerf 3 } + + winlink1000OduAirCurrentRate OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS deprecated + DESCRIPTION + "Deprecated parameter. Actual rate of the air interface in Mbps. + For Channel Bandwidth of 20, 10, 5 MHz divide the value by 1, 2, 4 respectively." + ::= { winlink1000OduAirPerf 4 } + + winlink1000OduAirCurrentRateIdx OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index of current air rate." + ::= { winlink1000OduAirPerf 5 } + + winlink1000OduAirChainsRxPower OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Received Signal Strength of Cpe chains in dBm. + Chain 1 RSS: (1 Byte) + Chain 2 RSS: (1 Byte) + Chain 3 RSS: (1 Byte)" + ::= { winlink1000OduAirPerf 6 } + + winlink1000OduAirCurrentRateCBW OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "CBW of current air rate." + ::= { winlink1000OduAirPerf 7 } + + winlink1000OduAirCurrentRateGI OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "GI of current air rate." + ::= { winlink1000OduAirPerf 8 } + + winlink1000OduAirTxPower36 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS deprecated + DESCRIPTION + "Deprecated parameter. Actual behavior is read-only." + ::= { winlink1000OduAir 10 } + + winlink1000OduAirTxPower48 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS deprecated + DESCRIPTION + "Deprecated parameter. Actual behavior is read-only." + ::= { winlink1000OduAir 11 } + + winlink1000OduAirCurrentTxPower OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current Transmit Power in dBm. This is a nominal value while the actual transmit power includes additional attenuation." + ::= { winlink1000OduAir 12 } + + winlink1000OduAirMinFrequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum center frequency in MHz." + ::= { winlink1000OduAir 13 } + + winlink1000OduAirMaxFrequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum center frequency in MHz." + ::= { winlink1000OduAir 14 } + + winlink1000OduAirFreqResolution OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Center Frequency resolution. + Measured in MHz if value < 100, otherwise in KHz." + ::= { winlink1000OduAir 15 } + + winlink1000OduAirCurrentFreq OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current Center Frequency. + Measured in MHz if center frequency resolution value < 100, otherwise in KHz." + ::= { winlink1000OduAir 16 } + + winlink1000OduAirNumberOfChannels OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of channels that can be used." + ::= { winlink1000OduAir 17 } + + -- ########################################################### + -- Channels Table + -- ########################################################### + + winlink1000OduAirChannelsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduAirChannelsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table of channels used by automatic channels selection (ACS)." + ::= { winlink1000OduAir 18 } + + winlink1000OduAirChannelsEntry OBJECT-TYPE + SYNTAX Winlink1000OduAirChannelsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ACS channels table entry." + INDEX { winlink1000OduAirChannelsIndex } + ::= { winlink1000OduAirChannelsTable 1 } + + Winlink1000OduAirChannelsEntry ::= SEQUENCE { + winlink1000OduAirChannelsIndex + INTEGER, + winlink1000OduAirChannelsFrequency + INTEGER, + winlink1000OduAirChannelsOperState + INTEGER, + winlink1000OduAirChannelsAvail + INTEGER, + winlink1000OduAirChannelsDefaultFreq + INTEGER + } + + winlink1000OduAirChannelsIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Channel Index." + ::= { winlink1000OduAirChannelsEntry 1 } + + winlink1000OduAirChannelsFrequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Channel frequency in MHz." + ::= { winlink1000OduAirChannelsEntry 2 } + + winlink1000OduAirChannelsOperState OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Channel state. Can be set by the user. + Automatic Channel Selection uses channels that are AirChannelsOperState enabled and AirChannelsAvail enabled. + A change is effective after link re-synchronization. Valid values: disabled (0), enabled (1). + Rewriteable only in Point-To-Point products." + ::= { winlink1000OduAirChannelsEntry 3 } + + winlink1000OduAirChannelsAvail OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Channel state. Product specific and cannot be changed by the user. + Automatic Channel Selection uses channels that are AirChannelsOperState enabled and AirChannelsAvail enabled. + Valid values: disabled (0), enabled (1)." + ::= { winlink1000OduAirChannelsEntry 4 } + + winlink1000OduAirChannelsDefaultFreq OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Default channel's availability for all CBWs. + The valid values are: forbidden (0), available (1)." + ::= { winlink1000OduAirChannelsEntry 5 } + + winlink1000OduAirDfsState OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Radar detection state. Valid values: disabled (0), enabled (1)." + ::= { winlink1000OduAir 19 } + + winlink1000OduAirAutoChannelSelectionState OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS deprecated + DESCRIPTION + "Deprecated parameter. Indicating Automatic Channel Selection availability at current channel bandwidth. + Valid values: disabled (0), enabled (1)." + ::= { winlink1000OduAir 20 } + + winlink1000OduAirEnableTxPower OBJECT-TYPE + SYNTAX INTEGER { + enabled (1), + disabled (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicating Transmit power configuration enabled or disabled." + ::= { winlink1000OduAir 21 } + + winlink1000OduAirMinTxPower OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum Transmit power in dBm." + ::= { winlink1000OduAir 22 } + + -- ########################################################### + -- Max Tx Power Table + -- ########################################################### + + winlink1000OduAirMaxTxPowerTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduAirMaxTxPowerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table of Maximum transmit power per air rate, in dBm." + ::= { winlink1000OduAir 23 } + + winlink1000OduAirMaxTxPowerEntry OBJECT-TYPE + SYNTAX Winlink1000OduAirMaxTxPowerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Maximum Transmit power table entry." + INDEX { winlink1000OduAirMaxTxPowerIndex } + ::= { winlink1000OduAirMaxTxPowerTable 1 } + + Winlink1000OduAirMaxTxPowerEntry ::= SEQUENCE { + winlink1000OduAirMaxTxPowerIndex + INTEGER, + winlink1000OduAirMaxTxPower + INTEGER + } + + winlink1000OduAirMaxTxPowerIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Air interface rate index." + ::= { winlink1000OduAirMaxTxPowerEntry 1 } + + winlink1000OduAirMaxTxPower OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum Transmit power in dBm." + ::= { winlink1000OduAirMaxTxPowerEntry 2 } + + winlink1000OduAirChannelBandwidth OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Channel bandwidth in KHz. A change is effective after reset." + ::= { winlink1000OduAir 24 } + + -- ########################################################### + -- Channel BW Table + -- ########################################################### + + winlink1000OduAirChannelBWTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduAirChannelBWEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Channel Bandwidths table." + ::= { winlink1000OduAir 25 } + + winlink1000OduAirChannelBWEntry OBJECT-TYPE + SYNTAX Winlink1000OduAirChannelBWEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Channel Bandwidth table entry." + INDEX { winlink1000OduAirChannelBWIndex } + ::= { winlink1000OduAirChannelBWTable 1 } + + Winlink1000OduAirChannelBWEntry ::= SEQUENCE { + winlink1000OduAirChannelBWIndex + INTEGER, + winlink1000OduAirChannelBWAvail + INTEGER, + winlink1000OduAirChannelsAdminState + DisplayString, + winlink1000OduAirChannelBWHSSATDDConflictPerCBW + INTEGER, + winlink1000OduAirChannelBWMinRatioForSupporting + INTEGER, + winlink1000OduAirChannelBWMaxRatioForSupporting + INTEGER + } + + winlink1000OduAirChannelBWIndex OBJECT-TYPE + SYNTAX INTEGER { + channelBW5MHz(1), + channelBW10MHz(2), + channelBW20MHz(3), + channelBW40MHz(4), + channelBW80MHz(5), + channelBW7MHz(6), + channelBW14MHz(7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Channel Bandwidth index." + ::= { winlink1000OduAirChannelBWEntry 1 } + + winlink1000OduAirChannelBWAvail OBJECT-TYPE + SYNTAX INTEGER { + notSupported(1), + supportedManual(2), + supportedWithACS(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Channel Bandwidth availability, product specific. + Options are: Not supported, supported with manual channel selection, supported with Automatic Channel Selection." + ::= { winlink1000OduAirChannelBWEntry 2 } + + winlink1000OduAirChannelsAdminState OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Channels' availability per CBW." + ::= { winlink1000OduAirChannelBWEntry 3 } + + winlink1000OduAirChannelBWHSSATDDConflictPerCBW OBJECT-TYPE + SYNTAX INTEGER { + noConflict(1), + conflictSingle(2), + conflictDual(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indication for possible Link drop per CBW due to conflict between HSS and ATDD." + ::= { winlink1000OduAirChannelBWEntry 4 } + + winlink1000OduAirChannelBWMinRatioForSupporting OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimal TX ratio that may be used by the HSM and still enable proper operation of the aforementioned CBW." + ::= { winlink1000OduAirChannelBWEntry 5 } + + winlink1000OduAirChannelBWMaxRatioForSupporting OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximal TX ratio that may be used by the HSM and still enable proper operation of the aforementioned CBW." + ::= { winlink1000OduAirChannelBWEntry 6 } + + winlink1000OduAirRFD OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current radio frame duration in microseconds." + ::= { winlink1000OduAir 26 } + + -- ########################################################### + -- Available Rates Table + -- ########################################################### + + winlink1000OduAirRatesTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduAirRatesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Air Rate indexes table for current channel bandwidth." + ::= { winlink1000OduAir 27 } + + winlink1000OduAirRatesEntry OBJECT-TYPE + SYNTAX Winlink1000OduAirRatesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Air Rate indexes table entry." + INDEX { winlink1000OduAirRatesIndex } + ::= { winlink1000OduAirRatesTable 1 } + + Winlink1000OduAirRatesEntry ::= SEQUENCE { + winlink1000OduAirRatesIndex + INTEGER, + winlink1000OduAirRatesAvail + INTEGER + } + + winlink1000OduAirRatesIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Air Rate index." + ::= { winlink1000OduAirRatesEntry 1 } + + winlink1000OduAirRatesAvail OBJECT-TYPE + SYNTAX INTEGER { + rateNotAvailable(1), + rateAvailable(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Air Rate availability, depending on air interface conditions." + ::= { winlink1000OduAirRatesEntry 2 } + + winlink1000OduAirDesiredRateIdx OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Required Air Rate index. 0 reserved for Adaptive Rate. + A change is effective immediately after Set operation to the master side + while the link is up." + ::= { winlink1000OduAir 28 } + + winlink1000OduAirLinkDistance OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Link distance in meters. + A value of -1 indicates an illegal value and is also used when a link is not established." + ::= { winlink1000OduAir 29 } + + winlink1000OduAirLinkWorkingMode OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + normal(2), + fullCompatibilityRemoteUpgradeAvailable(3), + fullCompatibilityLocalUpgradeAvailable(4), + restrictedCompatibilityRemoteUpgradeRecomended(5), + restrictedCompatibilityLocalUpgradeRecomended(6), + softwareUpgradeRemoteUpgradeRequired(7), + softwareUpgradeLocalUpgradeRequired(8), + versionsIncompatibilityRemoteUpgradeRequired(9), + versionsIncompatibilityLocalUpgradeRequired(10) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Link working mode as a result of comparing versions of both sides of the link. + Possible modes are: Unknown - no link, Normal - versions on both sides are identical with full compatibility, + with restricted compatibility, or versions on both sides are different with software upgrade or versions incompatibility." + ::= { winlink1000OduAir 30 } + + winlink1000OduAirMajorLinkIfVersion OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Major link interface version" + ::= { winlink1000OduAir 31 } + + winlink1000OduAirMinorLinkIfVersion OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minor link interface version" + ::= { winlink1000OduAir 32 } + + winlink1000OduAirHss OBJECT IDENTIFIER ::= { winlink1000OduAir 40 } + + winlink1000OduAirHssDesiredOpState OBJECT-TYPE + SYNTAX INTEGER { + notSupported(1), + independentUnit(2), + hubSyncMaster(3), + hubSyncClientContinueTx(4), + hubSyncClientDisableTx(5), + gpsSync(6), + independentSyncUnit-ISU(7) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Required Hub Site Synchronization operating state. + For HssSyncUnits : For hssISU :[2,7] ,For hssGSU :[2,6] + For HBS: [2,3,4,5]" + ::= { winlink1000OduAirHss 1 } + + winlink1000OduAirHssCurrentOpState OBJECT-TYPE + SYNTAX INTEGER { + notSupported(1), + independentUnit(2), + hubSyncMaster(3), + hubSyncClientContinueTx(4), + hubSyncClientDisableTx(5), + gpsSync(6), + independentSyncUnit-ISU(7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current Hub Site Synchronization operating state." + ::= { winlink1000OduAirHss 2 } + + winlink1000OduAirHssSyncStatus OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(1), + notSynchronized(2), + synchronized(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization sync status." + ::= { winlink1000OduAirHss 3 } + + winlink1000OduAirHssExtPulseStatus OBJECT-TYPE + SYNTAX INTEGER { + notDetected(1), + generating(2), + generatingAndDetected(3), + generatingAndImproperDetected(4), + detected(5), + improperDetected(6), + multipleSourcesDetected(7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization external pulse detection status. + In GSS mode: + if generating then 1PSP is auto generated by the GSS Unit. + if generatingAndDetecting then 1PSP is generated by GPS satellites signal." + ::= { winlink1000OduAirHss 4 } + + winlink1000OduAirHssExtPulseType OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(1), + typeA(2), + typeB(3), + typeC(4), + typeD(5), + typeE(6), + typeF(7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization external pulse type." + ::= { winlink1000OduAirHss 5 } + + winlink1000OduAirHssDesiredExtPulseType OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(1), + typeA(2), + typeB(3), + typeC(4), + typeD(5), + typeE(6), + typeF(7) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization required external pulse type. Valid values for read write: + {typeA(2),typeB(3),typeC(4),typeD(5),typeE(6),typeF(7)}. Valid value for read only: + {notApplicable(1)}." + ::= { winlink1000OduAirHss 6 } + + -- ########################################################### + -- HSS Radio Frame Pattern Table + -- ########################################################### + winlink1000OduAirHssRfpTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduAirHssRfpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ODU Radio Frame Patterns (RFP) Table." + ::= { winlink1000OduAirHss 7 } + + winlink1000OduAirHssRfpEntry OBJECT-TYPE + SYNTAX Winlink1000OduAirHssRfpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ODU RFP Table entry." + INDEX { winlink1000OduAirHssRfpIndex } + ::= { winlink1000OduAirHssRfpTable 1 } + + Winlink1000OduAirHssRfpEntry ::= SEQUENCE { + winlink1000OduAirHssRfpIndex + INTEGER, + winlink1000OduAirHssRfpEthChannelBW5MHz + INTEGER, + winlink1000OduAirHssRfpTdmChannelBW5MHz + INTEGER, + winlink1000OduAirHssRfpEthChannelBW10MHz + INTEGER, + winlink1000OduAirHssRfpTdmChannelBW10MHz + INTEGER, + winlink1000OduAirHssRfpEthChannelBW20MHz + INTEGER, + winlink1000OduAirHssRfpTdmChannelBW20MHz + INTEGER, + winlink1000OduAirHssRfpEthChannelBW40MHz + INTEGER, + winlink1000OduAirHssRfpTdmChannelBW40MHz + INTEGER, + winlink1000OduAirHssRfpEthChannelBW80MHz + INTEGER, + winlink1000OduAirHssRfpEthChannelBW7MHz + INTEGER, + winlink1000OduAirHssRfpEthChannelBW14MHz + INTEGER + } + + winlink1000OduAirHssRfpIndex OBJECT-TYPE + SYNTAX INTEGER (2..7) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ODU RFP Table index. The index represent the Radio Frame Pattern: + typeA(2), typeB(3), typeC(4), typeD(5),typeE(6),typeF(7)." + ::= { winlink1000OduAirHssRfpEntry 1 } + + winlink1000OduAirHssRfpEthChannelBW5MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of Ethernet service under Channel BW of 5MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 2 } + + winlink1000OduAirHssRfpTdmChannelBW5MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of TDM service under Channel BW of 5MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 3 } + + winlink1000OduAirHssRfpEthChannelBW10MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of Ethernet service under Channel BW of 10MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 4 } + + winlink1000OduAirHssRfpTdmChannelBW10MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of TDM service under Channel BW of 10MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 5 } + + winlink1000OduAirHssRfpEthChannelBW20MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of Ethernet service under Channel BW of 20MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 6 } + + winlink1000OduAirHssRfpTdmChannelBW20MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of TDM service under Channel BW of 20MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 7 } + + winlink1000OduAirHssRfpEthChannelBW40MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of Ethernet service under Channel BW of 40MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 8 } + + winlink1000OduAirHssRfpTdmChannelBW40MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of TDM service under Channel BW of 40MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 9 } + + winlink1000OduAirHssRfpEthChannelBW80MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of Ethernet service under Channel BW of 80MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 10 } + + winlink1000OduAirHssRfpEthChannelBW7MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of Ethernet service under Channel BW of 7MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 11 } + + winlink1000OduAirHssRfpEthChannelBW14MHz OBJECT-TYPE + SYNTAX INTEGER { + bestFit(1), + nonOptimal(2), + notAvailable(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Represents the compatibility of Ethernet service under Channel BW of 14MHz + in the specific Radio Frame Pattern." + ::= { winlink1000OduAirHssRfpEntry 12 } + + winlink1000OduAirHssRfpStr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization supported patterns" + ::= { winlink1000OduAirHss 8 } + + winlink1000OduAirHssHsmID OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique ID which is common to the HSM and all its collocated ODUs" + ::= { winlink1000OduAirHss 9 } + + winlink1000OduAirHssTime OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization GPS time" + ::= { winlink1000OduAirHss 10 } + + winlink1000OduAirHssLatitude OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization GPS Latitude" + ::= { winlink1000OduAirHss 11 } + + winlink1000OduAirHssNSIndicator OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization GPS N/S Indicator" + ::= { winlink1000OduAirHss 12 } + + winlink1000OduAirHssLongitude OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization GPS Longitude" + ::= { winlink1000OduAirHss 13 } + + winlink1000OduAirHssEWIndicator OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization GPS E/W Indicator" + ::= { winlink1000OduAirHss 14 } + + winlink1000OduAirHssNumSatellites OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization GPS Number of satellites" + ::= { winlink1000OduAirHss 15 } + + winlink1000OduAirHssAltitude OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization GPS Altitude" + ::= { winlink1000OduAirHss 16 } + + winlink1000OduAirHssRfpPhase OBJECT-TYPE + SYNTAX INTEGER { + rfpNormalPhase(1), + rfpShiftedPhase(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Hub Site Synchronization GPS RFP phase" + ::= { winlink1000OduAirHss 17 } + + winlink1000OduAirHssInterSiteSynchronizationMode OBJECT-TYPE + SYNTAX INTEGER { + independent(1), + synchronized(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Inter-Site Synchronization Mode - independent / synchronized" + ::= { winlink1000OduAirHss 18 } + + winlink1000OduAirHssInterSiteSynchronizationAvailability OBJECT-TYPE + SYNTAX INTEGER { + notAvailable(1), + available(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Inter-Site Synchronization Availability" + ::= { winlink1000OduAirHss 19 } + + winlink1000OduAirHssSatellitesSatSyncRequired OBJECT-TYPE + SYNTAX INTEGER { + notRequired(1), + required(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Satellites Synchronization Is Required" + ::= { winlink1000OduAirHss 20 } + + winlink1000OduAirHssDomainID OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "EHSS domain. Indentify set of CUs with same HSS synchronization" + ::= { winlink1000OduAirHss 21 } + + winlink1000OduAirHssSupportedSynchronizationProtocol OBJECT-TYPE + SYNTAX INTEGER { + serialOnly(1), + ethOnly(2), + both(3), + ghssAndEth(4), + ghssEthSerial(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Supported Synchronization Protocols" + ::= { winlink1000OduAirHss 22 } + + winlink1000OduAirHssDesiredSynchronizationProtocol OBJECT-TYPE + SYNTAX INTEGER { + serialOnly(1), + ethOnly(2), + both(3), + ghssOnly(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Desired Synchronization Protocols" + ::= { winlink1000OduAirHss 23 } + + winlink1000OduAirHssDiscover OBJECT-TYPE + SYNTAX INTEGER { + startAll(1), + startAllMstr(2), + startMyDmn(3), + startMyMstr(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Initiate Discovery process of ODUs on the network." + ::= { winlink1000OduAirHss 24 } + + winlink1000OduAirHssNumberOfDiscoveredODUs OBJECT-TYPE + SYNTAX INTEGER (0..1000) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number OF Discovered ODUs in network." + ::= { winlink1000OduAirHss 25 } + + -- ########################################################### + -- HSS Discover Table + -- ########################################################### + + winlink1000OduAirHssDiscoverTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduAirHssDiscoverEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "HSS Discover Table." + ::= { winlink1000OduAirHss 26 } + + winlink1000OduAirHssDiscoverEntry OBJECT-TYPE + SYNTAX Winlink1000OduAirHssDiscoverEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "ODU Discover Table entry." + INDEX { winlink1000OduAirHssDiscoverIndex } + ::= { winlink1000OduAirHssDiscoverTable 1 } + + Winlink1000OduAirHssDiscoverEntry ::= SEQUENCE { + winlink1000OduAirHssDiscoverIndex + INTEGER, + winlink1000OduAirHssDiscoverODUDescription + DisplayString + } + + winlink1000OduAirHssDiscoverIndex OBJECT-TYPE + SYNTAX INTEGER (1..256) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "HSS Discover Table Index." + ::= { winlink1000OduAirHssDiscoverEntry 1 } + + winlink1000OduAirHssDiscoverODUDescription OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Hold ODU HSS status in compress format: + Domain,IP,HSS Role,Hss support, + Enabled HSS protocol,Sync Status, + Location, IPv6." + ::= { winlink1000OduAirHssDiscoverEntry 2 } + + -- ###################### End of Discover Table ################### + + winlink1000OduAirHssMasterSlaveCompatibility OBJECT-TYPE + SYNTAX INTEGER { + compatible(1), + notCompatible(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "EHSM version compatibility. Relevant to Ethernet HSS Clients only." + ::= { winlink1000OduAirHss 27 } + + winlink1000OduAirHssNumberOfAssociatedCU OBJECT-TYPE + SYNTAX INTEGER (0..256) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of associated Ethernet HSS Clients. Relevant to Ethernet HSS Masters only" + ::= { winlink1000OduAirHss 28 } + + -- ########################################################### + -- HSS Associated CU Table + -- ########################################################### + + winlink1000OduAirHssAssociatedCUTable OBJECT-TYPE + SYNTAX SEQUENCE OF Winlink1000OduAirHssAssociatedCUTableEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Associated Ethernet HSS Clients Table. Releant for Ethernet HSS Masters only." + ::= { winlink1000OduAirHss 29 } + + winlink1000OduAirHssAssociatedCUTableEntry OBJECT-TYPE + SYNTAX Winlink1000OduAirHssAssociatedCUTableEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Associated Ethernet HSS Clients Table Entry. Releant for Ethernet HSS Masters only." + INDEX { winlink1000OduAirHssAssociatedCUIndex } + ::= { winlink1000OduAirHssAssociatedCUTable 1 } + + Winlink1000OduAirHssAssociatedCUTableEntry ::= SEQUENCE { + winlink1000OduAirHssAssociatedCUIndex + INTEGER, + winlink1000OduAirHssAssociatedCUDescription + DisplayString + } + + winlink1000OduAirHssAssociatedCUIndex OBJECT-TYPE + SYNTAX INTEGER (1..256) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Associated Ethernet HSS Clients Table Index. Releant for Ethernet HSS Masters only." + ::= { winlink1000OduAirHssAssociatedCUTableEntry 1 } + + winlink1000OduAirHssAssociatedCUDescription OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Holds Associated Ethernet HSS Clients Description in compress format: + IP,Delay,Compatibility,Ethernet Speed, Ethernet Rx rate, IPv6" + ::= { winlink1000OduAirHssAssociatedCUTableEntry 2 } + + -- ###################### End of Associated CU Table ################### + + winlink1000OduAirHssSyncStatusEth OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(1), + notSynchronized(2), + goodSynchronizationLevel(3), + mediumSynchronizationLevel(4), + badSynchronizationLevel(5), + startSynchronization(6) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Ethernet HSS Client Synchronization Level" + ::= { winlink1000OduAirHss 30 } + + winlink1000OduAirHssEthVLANTag OBJECT-TYPE + SYNTAX INTEGER (1..40947) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Ethernet HSS VLan Tag: + The least significate decimal digit is the VLan Priority(0-6) + and the rest of the digits represents VLan ID (2-4094)" + ::= { winlink1000OduAirHss 31 } + + winlink1000OduAirHssHSMIPAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "HSMs IP address. Relevant for HSC synchronized over Ethernet." + ::= { winlink1000OduAirHss 32 } + + winlink1000OduAirHssDelayToHSM OBJECT-TYPE + SYNTAX INTEGER (0..1000000) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Delay in microseconds to HSM. Relevant for HSC synchronized over Ethernet." + ::= { winlink1000OduAirHss 33 } + + winlink1000OduAirHssSyncAcquisitionSeconds OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Accumulated quantity of seconds in clock acquisition while connected to current HSM" + ::= { winlink1000OduAirHss 34 } + + winlink1000OduAirHssHSMIPv6Address OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "HSMs IPv6 address. Relevant for HSC synchronized over Ethernet." + ::= { winlink1000OduAirHss 35 } + + -- ###################### End of HSS Section ################### + + winlink1000OduAirLockRemote OBJECT-TYPE + SYNTAX INTEGER { + unlock(1), + lock(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This parameter enables locking the link with a specific ODU. + The following values can be set: + Unlock (default) - The ODU is not locked on a specific remote ODU. Unlock can only be performed when the link is not connected. + Lock - The ODU is locked on a specific remote ODU. Lock can only be performed when the link is active." + ::= { winlink1000OduAir 41 } + + winlink1000OduAirAntennaGain OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Current Antenna Gain in 0.1 dBi resolution. User defined value for + external antenna. + Legal range: MinAntennaGain - Alarm. + " + ::= { winlink1000OduAir 42 } + + externalAlarmInPort1Alarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent every time an alarm occurs in the External Alarm Input of port #1. + Contains a single parameter, which is its description: + 1 - Description: External Alarm 1 - - Alarm. + " + ::= 105 + + externalAlarmInPort2Alarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent every time an alarm occurs in the External Alarm Input of port #2. + Contains a single parameter, which is its description: + 1 - Description: External Alarm 2 - - Alarm. + " + ::= 106 + + bitFailedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { critical } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if there is no way to recover from the situation. + Contains two parameters: + 1 - Description: ODU power up built in test failed. Error code is: %n + 2 - %n number + " + ::= 107 + + wrongConfigurationLoadedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if there is a way to recover from the situation. + Contains two parameters: + 1 - Description: Wrong configuration loaded. Error code is: %n + 2 - %n number + " + ::= 108 + + lanPort1DisconnectedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN port 1 status changed to disconnected. + Contains a single parameter, which is its description: + 1 - Description: LAN port 1 status changed to disconnected. + " + ::= 109 + + lanPort2DisconnectedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN port 2 status changed to disconnected. + Contains a single parameter, which is its description: + 1 - Description: LAN port 2 status changed to disconnected. + " + ::= 110 + + mngPortDisconnectedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN1 port status changed to disconnected. + Contains a single parameter, which is its description: + 1 - Description: LAN1 port status changed to disconnected. + " + ::= 111 + + externalAlarmInPort3Alarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent every time an alarm occurs in the External Alarm Input of port #3. + Contains a single parameter, which is its description: + 1 - Description: External Alarm 3 - - Alarm. + " + ::= 112 + + externalAlarmInPort4Alarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent every time an alarm occurs in the External Alarm Input of port #4. + Contains a single parameter, which is its description: + 1 - Description: External Alarm 4 - - Alarm. + " + ::= 113 + + swVersionsMismatchFullCompatibilityAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { warning } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if SW versions mismatch with full link functionality. + Contains a single parameter, which is its description: + 1 - Description: Software versions mismatch - full link functionality + " + ::= 114 + + swVersionsMismatchRestrictedCompatibilityAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { minor } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if SW versions mismatch with restricted link functionality. + Contains a single parameter, which is its description: + 1 - Description: Software versions mismatch - restricted link functionality + " + ::= 115 + + swVersionsMismatchSoftwareUpgradeRequired TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if SW versions mismatch and SW upgrade is required. + Contains a single parameter, which is its description: + 1 - Description: Software versions mismatch - Software upgrade required + " + ::= 116 + + swVersionsIncompatible TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { critical } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if SW versions are incompatible. + Contains a single parameter, which is its description: + 1 - Description: SW Versions incompatible + " + ::= 117 + + hssMultipleSourcesDetectedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that multiple sync pulse sources were detected. + Contains a single parameter, which is its description: + 1 - Description: HSS multiple sync sources were detected. + " + ::= 118 + + hssSyncToProperSourceStoppedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that synchronization to a proper sync pulse source was stopped. + Contains a single parameter, which is its description: + 1 - Description: HSS sync pulse - Down. The reason is: %s. + %s - Is the reason for the sync down. + " + ::= 119 + + hssSyncPulseDetectedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that HSS additional sync pulse was detected. + Contains a single parameter, which is its description: + 1 - Description: HSS additional sync pulse was detected. + " + ::= 120 + + tdmBackupAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the TDM backup link was activated. + Contains a single parameter, which is its description: + 1 - Description: TDM backup alarm - backup link was activated. + " + ::= 121 + + linkLockUnauthorizedRemoteODU TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the remote ODU is unauthorized. + Contains a single parameter, which is its description: + 1 - Description: Unauthorized remote ODU connection rejected. + " + ::= 122 + + linkLockUnauthorizedODU TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the ODU is unauthorized. + Contains a single parameter, which is its description: + 1 - Description: Unauthorized ODU connection rejected. + " + ::= 123 + + hotStandbyAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the hot standby secondary link was activated. + Contains a single parameter, which is its description: + 1 - Description: Secondary Link Is Active. + " + ::= 124 + + sfpInsertion TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Indicates that a device was inserted to SFP Port + " + ::= 126 + + sfpPort1DisconnectedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the SFP port 1 status changed to disconnected. + Contains a single parameter which is its description: + 1 - Description: SFP port 1 status changed to disconnected. + " + ::= 127 + + ringRplStateActiveAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + RPL state changed to Active. + " + ::= 128 + + + desiredRatioCanNotBeAppliedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { minor } + --&MESG "$'1" + DESCRIPTION + " + Indicates Desired UL/DL RAtio Can Not Be Applied. + " + ::= 129 + + cbwMismatch TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that a Channel Bandwidth mismatch was detected. + Contains two parameters: + 1 - Description: Channel Bandwidth Mismatch: one side is %n0 MHz and the other is %n1 MHz. + %n0 is the local Channel Bandwidth value in MHz. + %n1 is the remoet Channel Bandwidth value in MHz." + ::= 130 + + gpsNotSynchronized TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the GPS is not synchronized with satellites. + Pulses are self generated. + " + ::= 131 + + pdTooHighDueCbwLimitations TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates that link cannot be established because + link range is too large for channel bandwidth. + " + ::= 132 + + hbsEncryptionAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates an encryption key mismatch. + Contains a single parameter, which is its description, including the HSU's name + " + ::= 133 + + hbsEhServiceClosedToHsu TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates an encryption key mismatch. + Contains a single parameter, which is its description, including the HSU's name + " + ::= 134 + + hbsUnsynchronizedHsuAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { critical } + --&MESG "$'1" + DESCRIPTION + " + Indicates a registered HSU lost synchronization. + " + ::= 135 + + hbsInactiveHbsAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates HBS is InActive. + " + ::= 136 + + incompatibleHsu TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { critical } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the HSU is not compatible to HBS. + Contains a single parameter, which is its description: + 1 - Description: Incompatible ODUs. + " + ::= 137 + + hsuUnsupportedBeacon TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { warning } + --&MESG "$'1" + DESCRIPTION + " + Indicates an unsupported beacon has arrived at HSU + " + ::= 138 + + lanPortDisconnectedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN port status changed to disconnected. + Contains a single parameter, which is its description: + 1 - Description: LAN port status changed to disconnected. + " + ::= 139 + + poePortDisconnectedAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN2 port status changed to disconnected. + Contains a single parameter, which is its description: + 1 - Description: LAN2 port status changed to disconnected. + " + ::= 140 + + poePowerConsumptionAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the POE Power Consumption is above allowed maximum. + Contains a single parameter, which is its description: + 1 - Description: POE consumption above allowed maximum. port closed. + " + ::= 141 + + hobupFaultyStateAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + This Alarm will indicate that the Hot Backup module is in faulty state. + 1 - Description: Hot Backup fault detected: %s unit. + %s - Primary Or Secondary Unit + " + ::= 149 + + gpsOverCurrentAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the GPS Antenna current consumption is above allowed maximum. + Contains a single parameter, which is its description: + 1 - Description: GPS Antenna current consumption above allowed maximum. GPS closed. + " + ::= 150 + + gpsCommunicationFailiureAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the GPS data isn't received. + Contains a single parameter, which is its description: + 1 - Description: GPS Communication failiure. + " + ::= 151 + + temperatureThresholdAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Indicates the board temperature is above allowed maximum. + Contains a single parameter, which is its description: + 1 - Description: GPS Antenna current consumption above allowed maximum. GPS closed. + " + ::= 152 + + localRouterDiscoveryStatus TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + This Alarm will indicate that we have no connection with local train router. + 1 - Description: MacLearningUpdate detected disconnection with local train router %s + %s - local train IP + " + ::= 153 + + trackRouterDiscoveryStatus TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + This Alarm will indicate that we have no connection with Track side router. + 1 - Description: MacLearningUpdate detected disconnection with Track side router %s + %s - Default gateway IP + " + ::= 154 + + lastUserSnmpAccessOverHourAgo TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + This trap will indicate that the last access of the accessing user was more than an hour ago. + 1 - Description: User %s performed SNMP access after more than an hour. + %s - user name + " + ::= 155 + + btsTargetUnreachable TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + This Alarm will indicate that we have no connection with Bts desired target. + 1 - Description: TNC detected disconnection with the BTS target %s + %s - Default gateway IP + " + ::= 156 + + tdmServiceClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 100 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that TDM Service fault is cleared. + Contains a single parameter, which is its description: + 1 - Description: TDM Service - Normal. + " + ::= 200 + + ethServiceOpened TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 101 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that Ethernet Service has been opened. + Contains a single parameter, which is its description: + 1 - Description: Ethernet Service has been opened. + " + ::= 201 + + encryptionClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 103 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that encryption is OK. + Contains a single parameter, which is its description: + 1 - Description: Encryption Status - Normal. + " + ::= 203 + + changeLinkPasswordClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 104 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the Link Password was changed successfully. + Contains a single parameter, which is its description: + 1 - Description: Link Password has been changed at/on: %s. + %s - Is the Local Site name or Remote Site name or both sides of the Link. + " + ::= 204 + + externalAlarmInPort1Clear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 105 } + --&MESG "$'1" + DESCRIPTION + " + This Trap is sent every time an External Alarm Input fault of port # 1 is cleared. + Contains a single parameter, which is its description: + 1 - Description: External Alarm 1 - - Alarm Cleared. + " + ::= 205 + + externalAlarmInPort2Clear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 106 } + --&MESG "$'1" + DESCRIPTION + " + This Trap is sent every time an External Alarm Input fault of port # 2 is cleared. + Contains a single parameter, which is its description: + 1 - Description: External Alarm 2 - - Alarm Cleared. + " + ::= 206 + + lanPort1Clear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 109 } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN port 1 status changed to connected. + Contains two parameters: + 1 - Description: LAN port 1 status changed to connected - %s + 2 - %s Is the Eth. mode (speed & duplex) + " + ::= 209 + + lanPort2Clear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 110 } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN port 2 status changed to connected. + Contains two parameters: + 1 - Description: LAN port 2 status changed to connected - %s. + 2 - %s Is the Eth. mode (speed & duplex). + " + ::= 210 + + mngPortClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 111 } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN1 port status changed to connected. + Contains two parameters: + 1 - Description: LAN1 port status changed to connected - %s + 2 - %s Is the Eth. mode (speed & duplex) + " + ::= 211 + + externalAlarmInPort3Clear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 112 } + --&MESG "$'1" + DESCRIPTION + " + This Trap is sent every time an External Alarm Input fault of port # 3 is cleared. + Contains a single parameter, which is its description: + 1 - Description: External Alarm 3 - - Alarm Cleared. + " + ::= 212 + + externalAlarmInPort4Clear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 113 } + --&MESG "$'1" + DESCRIPTION + " + This Trap is sent every time an External Alarm Input fault of port # 4 is cleared. + Contains a single parameter, which is its description: + 1 - Description: External Alarm 4 - - Alarm Cleared. + " + ::= 213 + + swVersionsMatchFullCompatibilityClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 114 } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if SW versions match. + Contains a single parameter, which is its description: + 1 - Description: Software Versions compatible + " + ::= 214 + + swVersionsMatchRestrictedCompatibilityClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 115 } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if SW versions match and link functionality is not restricted. + Contains a single parameter, which is its description: + 1 - Description: Software Versions compatible + " + ::= 215 + + swVersionsMatchSoftwareUpgradeRequiredClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 116 } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if SW versions match and SW upgrade is successful. + Contains a single parameter, which is its description: + 1 - Description: Software Versions compatible + " + ::= 216 + + swVersionsCompatibleClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 117 } + --&MESG "$'1" + DESCRIPTION + " + The trap is sent if SW versions compatible + Contains a single parameter, which is its description: + 1 - Description: Software Versions compatible + " + ::= 217 + + hssMultipleSourcesDisappearedClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 118 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that multiple sync pulse sources disappeared. + Contains a single parameter, which is its description: + 1 - Description: HSS multiple sync pulse sources disappeared. + " + ::= 218 + + hssSyncToProperSourceAchievedClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 119 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that synchronization to a proper Sync source was achieved. + Contains a single parameter, which is its description: + 1 - Description: HSS sync pulse - Up. + " + ::= 219 + + hssSyncPulseDisappearedClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 120 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that HSS additional sync pulse disappeared. + Contains a single parameter, which is its description: + 1 - Description: HSS additional sync pulse was disappeared. + " + ::= 220 + + tdmBackupClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 121 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the TDM main link was activated. + Contains a single parameter, which is its description: + 1 - Description: TDM main link was activated. + " + ::= 221 + + linkLockAuthorizedRemoteODU TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 122 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the remote ODU is authorized. + Contains a single parameter, which is its description: + 1 - Description: Authorized remote ODU connection accepted. + " + ::= 222 + + linkLockAuthorizedODU TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 123 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the ODU is authorized. + Contains a single parameter, which is its description: + 1 - Description: Authorized ODU connection permitted. + " + ::= 223 + + linkAuthenticationDisabled TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 122 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the Link Lock is disabled. + Contains a single parameter, which is its description: + 1 - Description: Link Authentication has been disabled. + " + ::= 224 + + hotStandbyClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 124 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the Primary Link Was Activated. + Contains a single parameter, which is its description: + 1 - Description: Primary Link Is Active. + " + ::= 225 + + sfpExtraction TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Indicates that a device was extracted from SFP Port + " + ::= 226 + + sfpPort1Clear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 127 } + --&MESG "$'1" + DESCRIPTION + " + Indicates the SFP port 1 status changed to connected. + Contains two parameters: + 1 - Description: SFP port 1 status changed to connected - %s + 2 - %s Is the Eth. mode (speed & duplex) + " + ::= 227 + + compatibleIdus TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 10 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the ODU has identified compatible Idus on both sides of the link. + " + ::= 228 + + desiredRatioCanNotBeAppliedClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 129 } + --&MESG "$'1" + DESCRIPTION + " + Indicates Current UL/DL Ratio Is Equal To Desired Ratio. + " + ::= 229 + + cbwMatch TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 130 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that a Channel Bandwidth match was detected. + Contains a single parameter, which is its description: + 1 - Channel Bandwidth value in MHz. + " + ::= 230 + + switchCbwAndChannel TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the system is switching Channel Bandwidth and channel frequency. + Contains two parameters: + 1 - Switching to Channel Bandwith %n0 MHz and to channel %n1 GHz. + " + ::= 231 + + ringRplStateIdle TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 128 } + --&MESG "$'1" + DESCRIPTION + " + RPL state changed to Idle. + " + ::= 232 + + ringEthServiceStatus TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Indicates Ethernet service's state - blocked \ unblocked. + Contains a single parameter: + 1 - Description: Ethernet's state (blocked \ unblocked) + " + ::= 233 + + ringFirstRpmReceived TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Ring application: in non-RPL link indicates first from a specific RPL was received. + Contains a single parameter: + 1 - Description: RPM's VLAN ID + " + ::= 234 + + ringEthernetSrviceUnblockedTO TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Ring application: in non-RPL link Ethernet service is unblocked due to RPM timeout. + " + ::= 235 + + gpsSynchronized TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 131 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that the GPS is synchronized with satellites. + " + ::= 236 + + hbsEncryptionClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 133 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that encryption is OK. + Contains a single parameter, which is its description, including the HSU's name + " + ::= 237 + + hbsEhServiceOpenedToHsu TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 134 } + --&MESG "$'1" + DESCRIPTION + " + Indicates that encryption is OK. + Contains a single parameter, which is its description, including the HSU's name + " + ::= 238 + + hbsSynchronizedHsuAlarm TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 135 } + --&MESG "$'1" + DESCRIPTION + " + Indicates a registered HSU is synchronized. + " + ::= 239 + + hbsActiveHbs TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 136 } + --&MESG "$'1" + DESCRIPTION + " + Indicates when HBS has been activated. + " + ::= 240 + + switchCBW TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Switching Channel Bandwidth. + " + ::= 241 + + changeRatio TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + HBS Tx ratio has changed. + " + ::= 242 + + lanPortClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 139 } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN port status changed to connected. + Contains two parameters: + 1 - Description: LAN port status changed to connected - %s + 2 - %s Is the Eth. mode (speed & duplex) + " + ::= 243 + + poePortClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 140 } + --&MESG "$'1" + DESCRIPTION + " + Indicates the LAN2 port status changed to connected. + Contains two parameters: + 1 - Description: LAN2 port status changed to connected - %s + 2 - %s Is the Eth. mode (speed & duplex) + " + ::= 244 + + poePowerConsumptionClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 141 } + --&MESG "$'1" + DESCRIPTION + " + Indicates the POE power consumption is valid. + Contains two parameters: + 1 - Description: POE consumption within limits. port is opened. + 2 - %s Is the Eth. mode (speed & duplex) + " + ::= 245 + + incompatibleHbsHsu TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Incompatible HBS/HSU software versions - no service. + " + ::= 246 + + mobilityLinkOff TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Mobility - Link cannot be established due to: + 1 - The HBS does not support Mobility + 2 - Lack of resources in the HBS for HSU level + " + ::= 247 + + enterLocalConnection TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Entering Local Connection (Broadcast) Mode. + " + ::= 248 + + hobupActiveStateFaultyClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 149 } + --&MESG "$'1" + DESCRIPTION + " + this clear alarm will indicate that the Hot Backup unit is in active state. + Contains a single parameter, which is its description: + 1 - Description: Hot Backup %s unit activated. + %s - Primary Or Secondary Unit + " + ::= 249 + + hobupStandbyState TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + This info fault will indicate that the Hot backup module has entered standby/peer_detection state + Contains a single parameter, which is its description: + 1 - Description: Hot Backup in Standby state: %s unit. + %s - Primary Or Secondary Unit + " + ::= 250 + + gpsOverCurrentClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 150 } + --&MESG "$'1" + DESCRIPTION + " + Indicates the GPS Antenna current consumption is valid. + " + ::= 251 + + temperatureThresholdClear TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 152 } + --&MESG "$'1" + DESCRIPTION + " + Indicates the board temperature is valid. + " + ::= 252 + + localRouterDiscoverySucceed TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 153 } + --&MESG "$'1" + DESCRIPTION + " + Indicated the we succeeded to discover train router in ip %s MAC address %s + %s Train IP + %s Train MAC Address + " + ::= 253 + + trackRouterDiscoverySucceed TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 154 } + --&MESG "$'1" + DESCRIPTION + " + Indicated the we succeeded to discover track router in ip %s MAC address %s + %s Train IP + %s Train MAC Address + " + ::= 254 + + qosVersion2StrictMismatch TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + CPE doesn't support strict QOS configuration. + " + ::= 255 + + qosVersion2TtlMismatch TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + CPE doesn't support TTL configuration. + " + ::= 256 + + btsTargetIsReachable TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 156 } + --&MESG "$'1" + DESCRIPTION + " + Indicated the we succeeded to establish connection with the Bts desired target (%s) + %s Target IP + " + ::= 257 + + tcNotSupportedByHSU TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + CPE doesn't support TC functionality. + " + ::= 258 + + syncEPortHOStateChange TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Enter/leave HO state of SyncE port. + " + ::= 259 + + syncEPortFailureStateChange TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Enter/leave Failure state of SyncE port. + " + ::= 260 + + btsCpeUpdateServiceFailed TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Update service Failed + " + ::= 261 + + btsCpeUpdateServiceSucceed TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Update service Succeed + " + ::= 262 + radiusServerNoREsponse TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + No response from radius server + " + ::= 263 + noRadiusServerRespond TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { major } + --&MESG "$'1" + DESCRIPTION + " + Alarm indicates that no Radius server is connected + " + ::= 264 + radiusServerRespondedSuccessfully TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&CLEARS { 264 } + --&MESG "$'1" + DESCRIPTION + " + indicates that Radius server responded seccessfully. + " + ::= 265 + + bsaAlignmentStarted TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Indicate the beginning of Alignment Process + " + ::= 266 + + bsaAlignmentFinished TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Indicate the completion of Alignment Process + " + ::= 267 + + bsaAlignmentTriggered TRAP-TYPE + ENTERPRISE winlink1000 + VARIABLES { winlink1000GeneralTrapDescription, winlink1000OduAgnCurrAlarmSeverity, winlink1000OduAgnCurrAlarmIfIndex, + winlink1000OduAgnCurrAlarmUnit, winlink1000OduAgnCurrAlarmTimeT, winlink1000OduAgnCurrAlarmId } + --&ACTIONS { normal } + --&MESG "$'1" + DESCRIPTION + " + Indicate the triggering of Alignment Process due to exceeding thresholds + " + ::= 268 + + -- ########################################################### + -- Products Section + -- ########################################################### + + + radwinProducts OBJECT IDENTIFIER ::= { radwin 20 } + winlink1000Family OBJECT IDENTIFIER ::= { radwinProducts 2 } + radwin2000Family OBJECT IDENTIFIER ::= { radwinProducts 3 } + gpsSynchronizerFamily OBJECT IDENTIFIER ::= { radwinProducts 4 } + radwin5000HBSFamily OBJECT IDENTIFIER ::= { radwinProducts 5 } + radwin5000HSUFamily OBJECT IDENTIFIER ::= { radwinProducts 6 } + radwin6000Family OBJECT IDENTIFIER ::= { radwinProducts 10 } + radwinWiFiAPFamily OBJECT IDENTIFIER ::= { radwinProducts 20 } + + + -- + -- the following identifiers are assigned to ODU Products + -- + + odu OBJECT IDENTIFIER ::= { winlink1000Family 1 } + + oduIntegratedAntenna OBJECT IDENTIFIER ::= { odu 1 } + oduExternalAntenna OBJECT IDENTIFIER ::= { odu 2 } + + -- + -- Suffix 3,4,5,6,7,8,9,10,11,12,13,14,15,16 in the products section + -- are reserved for backward compatibility. + -- + + odu2000 OBJECT IDENTIFIER ::= { radwin2000Family 1 } + + odu2KIntegratedAntenna OBJECT IDENTIFIER ::= { odu2000 1 } + odu2KExternalAntenna OBJECT IDENTIFIER ::= { odu2000 2 } + + oduGSU OBJECT IDENTIFIER ::= { gpsSynchronizerFamily 1 } + + oduGSUExternalAntenna OBJECT IDENTIFIER ::= { oduGSU 2 } + + hssSyncUnits OBJECT IDENTIFIER ::= { gpsSynchronizerFamily 2 } + + hssISU OBJECT IDENTIFIER ::= { hssSyncUnits 1 } + hssGSU OBJECT IDENTIFIER ::= { hssSyncUnits 2 } + + oduHBS OBJECT IDENTIFIER ::= { radwin5000HBSFamily 1 } + + oduHBSIntegratedAntenna OBJECT IDENTIFIER ::= { oduHBS 1 } + oduHBSExternalAntenna OBJECT IDENTIFIER ::= { oduHBS 2 } + + oduHSU OBJECT IDENTIFIER ::= { radwin5000HSUFamily 1 } + + oduHSUIntegratedAntenna OBJECT IDENTIFIER ::= { oduHSU 1 } + oduHSUExternalAntenna OBJECT IDENTIFIER ::= { oduHSU 2 } + + odu6000 OBJECT IDENTIFIER ::= { radwin6000Family 1 } + + odu6K OBJECT IDENTIFIER ::= { odu6000 1 } + + gateway6000 OBJECT IDENTIFIER ::= { radwin6000Family 2 } + + gateway6K OBJECT IDENTIFIER ::= { gateway6000 1 } + + odu600 OBJECT IDENTIFIER ::= { radwinWiFiAPFamily 1 } + + oduWiFiAP OBJECT IDENTIFIER ::= { odu600 1 } + + END + |