diff options
Diffstat (limited to 'MIBS/ruckus/RUCKUS-SZ-CONFIG-WLAN-MIB')
| -rw-r--r-- | MIBS/ruckus/RUCKUS-SZ-CONFIG-WLAN-MIB | 291 |
1 files changed, 291 insertions, 0 deletions
diff --git a/MIBS/ruckus/RUCKUS-SZ-CONFIG-WLAN-MIB b/MIBS/ruckus/RUCKUS-SZ-CONFIG-WLAN-MIB new file mode 100644 index 0000000..364ce2b --- /dev/null +++ b/MIBS/ruckus/RUCKUS-SZ-CONFIG-WLAN-MIB @@ -0,0 +1,291 @@ +-- +-- Copyright 2010-2014 Ruckus Wireless, Inc. All rights reserved. +-- +-- RUCKUS WIRELESS, INC. CONFIDENTIAL - +-- This is an unpublished, proprietary work of Ruckus Wireless, Inc., and is +-- fully protected under copyright and trade secret laws. You may not view, +-- use, disclose, copy, or distribute this file or any information contained +-- herein except pursuant to a valid license from Ruckus. +-- + +RUCKUS-SZ-CONFIG-WLAN-MIB DEFINITIONS ::= BEGIN + +IMPORTS + ruckusSZWLANModule + FROM RUCKUS-ROOT-MIB + RuckusAdminStatus, + RuckusRadioMode, + RuckusSSID, + RuckusdB, + RuckusRateLimiting + FROM RUCKUS-TC-MIB + DisplayString, + MacAddress, + RowStatus, + PhysAddress, + TruthValue + FROM SNMPv2-TC + OBJECT-GROUP + FROM SNMPv2-CONF + IANAifType + FROM IANAifType-MIB + MODULE-IDENTITY, + OBJECT-TYPE, + Counter32, + Integer32, + Unsigned32, + IpAddress + FROM SNMPv2-SMI + Ipv6Address + FROM IPV6-TC; + +ruckusSZConfigWLANMIB MODULE-IDENTITY + LAST-UPDATED "201503191100Z" + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + "Ruckus Wireless, Inc. + + 350 West Java Dr. + Sunnyvale, CA 94089 + USA + + T: +1 (650) 265-4200 + F: +1 (408) 738-2065 + EMail: info@ruckuswireless.com + Web: www.ruckuswireless.com" + DESCRIPTION + "Ruckus WLAN mib" + ::= { ruckusSZWLANModule 2 } + +ruckusSZConfigWLANObjects OBJECT IDENTIFIER ::= { ruckusSZConfigWLANMIB 1 } + +ruckusSZConfigWLAN OBJECT IDENTIFIER ::= { ruckusSZConfigWLANObjects 1 } + + +ruckusSZConfigWLANTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusSZConfigWLANEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "SZ WLAN table." + ::= { ruckusSZConfigWLAN 1 } + +ruckusSZConfigWLANEntry OBJECT-TYPE + SYNTAX RuckusSZConfigWLANEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies each SZ WLAN configuration entry." + INDEX { + ruckusSZConfigWLANID } + ::= { ruckusSZConfigWLANTable 1 } + +RuckusSZConfigWLANEntry ::= SEQUENCE { + ruckusSZConfigWLANID INTEGER, + ruckusSZConfigWLANSSID OCTET STRING, + ruckusSZConfigWLANDescription DisplayString, + ruckusSZConfigWLANName OCTET STRING, + ruckusSZConfigWLANWLANServiceType INTEGER, + ruckusSZConfigWLANAuthentication INTEGER, + ruckusSZConfigWLANEncryption INTEGER, + ruckusSZConfigWLANWEPKeyIndex INTEGER, + ruckusSZConfigWLANWEPKey OCTET STRING, + ruckusSZConfigWLANWPACipherType INTEGER, + ruckusSZConfigWLANWPAKey OCTET STRING, + ruckusSZConfigWLANWirelessClientIsolation INTEGER, + ruckusSZConfigWLANZeroITActivation INTEGER, + ruckusSZConfigWLANServicePriority INTEGER, + ruckusSZConfigWLANAccountingUpdateInterval INTEGER, + ruckusSZConfigWLANVlanID INTEGER, + ruckusSZConfigWLANHideSSID INTEGER, + ruckusSZConfigWLANMaxClientsPerAP INTEGER +} + +ruckusSZConfigWLANID OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "this Wireless LAN(WLAN) ID " + ::= { ruckusSZConfigWLANEntry 1 } + +ruckusSZConfigWLANSSID OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "SSID for this Wireless LAN." + ::= { ruckusSZConfigWLANEntry 2 } + +ruckusSZConfigWLANDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description for this Wireless LAN." + ::= { ruckusSZConfigWLANEntry 3 } + +ruckusSZConfigWLANName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Name for this Wireless LAN" + ::= { ruckusSZConfigWLANEntry 4 } + +ruckusSZConfigWLANWLANServiceType OBJECT-TYPE + SYNTAX INTEGER { + standardUsage(1), + hotspot(2), + guest(3), + webauth(4), + hotspot20(5), + hotspot20-osen(6) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The the Service type for the Wireless LAN." + DEFVAL {standardUsage} + ::= { ruckusSZConfigWLANEntry 8 } + +ruckusSZConfigWLANAuthentication OBJECT-TYPE + SYNTAX INTEGER { + open(1), + eap(2), + mac-address(3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Authentication method choosen for this Wireless LAN." + DEFVAL {open} + ::= { ruckusSZConfigWLANEntry 10 } + +ruckusSZConfigWLANEncryption OBJECT-TYPE + SYNTAX INTEGER { + wpa2(1), + wpa-Mixed(2), + wep-64(3), + wep-128(4), + none-enc(5) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Encryption method choosen for this Wireless LAN." + DEFVAL {none-enc} + ::= { ruckusSZConfigWLANEntry 12 } + +ruckusSZConfigWLANWEPKeyIndex OBJECT-TYPE + SYNTAX INTEGER (1..4) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the WEP key index for the WEP encryption." + DEFVAL {1} + ::= { ruckusSZConfigWLANEntry 15 } + +ruckusSZConfigWLANWEPKey OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (10 | 26)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enter the Pass-phrase for the WEP encryption method. + Only 10 or 26 Hex character.such as: 1122334455" + ::= { ruckusSZConfigWLANEntry 16 } + +ruckusSZConfigWLANWPACipherType OBJECT-TYPE + SYNTAX INTEGER { + aes(1), + tkipaes(2), + null(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enter the encryption cipher method for the WPA encryption. + fpr WPA2,aes is only supported.null is only for read." + DEFVAL {aes} + ::= { ruckusSZConfigWLANEntry 20 } + +ruckusSZConfigWLANWPAKey OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (8..63 | 64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enter the Pass-phrase for the WPA encryption. + Specifies the WPA PSK (Wi-Fi Protected Access + Pre Shared key) + If the key length is 64 then all 64 characters should be in hex, + otherwise the key assumed to be ascii." + ::= { ruckusSZConfigWLANEntry 21 } + +ruckusSZConfigWLANWirelessClientIsolation OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet. + for Guest and webauth WLAN type, it must be 'enable'." + DEFVAL{2} + ::= { ruckusSZConfigWLANEntry 28 } + +ruckusSZConfigWLANZeroITActivation OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable the Zero IT Activation Service of the Wireless LAN or not." + DEFVAL{disable} + ::= { ruckusSZConfigWLANEntry 30 } + +ruckusSZConfigWLANServicePriority OBJECT-TYPE + SYNTAX INTEGER { + high(1), + low(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the QOS service priority for the Wireless LAN." + DEFVAL{high} + ::= { ruckusSZConfigWLANEntry 32 } + +ruckusSZConfigWLANAccountingUpdateInterval OBJECT-TYPE + SYNTAX INTEGER (1..60) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enter interval in minutes to update Accounting Server." + ::= { ruckusSZConfigWLANEntry 36 } + +ruckusSZConfigWLANVlanID OBJECT-TYPE + SYNTAX INTEGER ( 1..4094 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged." + DEFVAL{1} + ::= { ruckusSZConfigWLANEntry 45 } + +ruckusSZConfigWLANHideSSID OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Hide SSID, not to broadcast it SSID." + DEFVAL{disable} + ::= { ruckusSZConfigWLANEntry 50 } + +ruckusSZConfigWLANMaxClientsPerAP OBJECT-TYPE + SYNTAX INTEGER (1..512) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the Number of client devices the AP can service for the Wireless LAN." + DEFVAL{100} + ::= { ruckusSZConfigWLANEntry 55 } + +END |