diff options
Diffstat (limited to 'MIBS/ruckus/RUCKUS-ZD-WLAN-CONFIG-MIB')
| -rw-r--r-- | MIBS/ruckus/RUCKUS-ZD-WLAN-CONFIG-MIB | 754 |
1 files changed, 754 insertions, 0 deletions
diff --git a/MIBS/ruckus/RUCKUS-ZD-WLAN-CONFIG-MIB b/MIBS/ruckus/RUCKUS-ZD-WLAN-CONFIG-MIB new file mode 100644 index 0000000..75d0e3c --- /dev/null +++ b/MIBS/ruckus/RUCKUS-ZD-WLAN-CONFIG-MIB @@ -0,0 +1,754 @@ +-- +-- Copyright 2010-2013 Ruckus Wireless, Inc. All rights reserved. +-- +-- RUCKUS WIRELESS, INC. CONFIDENTIAL - +-- This is an unpublished, proprietary work of Ruckus Wireless, Inc., and is +-- fully protected under copyright and trade secret laws. You may not view, +-- use, disclose, copy, or distribute this file or any information contained +-- herein except pursuant to a valid license from Ruckus. +-- + +RUCKUS-ZD-WLAN-CONFIG-MIB DEFINITIONS ::= BEGIN + +IMPORTS + ruckusZDWLANModule + FROM RUCKUS-ROOT-MIB + DisplayString, + MacAddress, + RowStatus, + TruthValue + FROM SNMPv2-TC + OBJECT-GROUP + FROM SNMPv2-CONF + ifIndex, + InterfaceIndex + FROM IF-MIB + MODULE-IDENTITY, + OBJECT-TYPE, + Counter32, + Integer32, + Unsigned32, + IpAddress + FROM SNMPv2-SMI; + +ruckusZDWLANConfigMIB MODULE-IDENTITY + LAST-UPDATED "201010150800Z" + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + "Ruckus Wireless, Inc. + + Postal: + 350 West Java Dr. + Sunnyvale, CA 94089 + USA + + EMail: support@ruckuswireless.com + + Phone: +1-650-265-4200" + DESCRIPTION + "Ruckus ZD WLAN Configuration mib" + ::= { ruckusZDWLANModule 2 } + +ruckusZDWLANConfigObjects OBJECT IDENTIFIER ::= { ruckusZDWLANConfigMIB 1 } + +ruckusZDWLANConfig OBJECT IDENTIFIER ::= { ruckusZDWLANConfigObjects 1 } + + +ruckusZDWLANConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusZDWLANConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ZD WLAN table." + ::= { ruckusZDWLANConfig 1 } + +ruckusZDWLANConfigEntry OBJECT-TYPE + SYNTAX RuckusZDWLANConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies each ZD WLAN configuration entry." + INDEX { + ruckusZDWLANID } + ::= { ruckusZDWLANConfigTable 1 } + +RuckusZDWLANConfigEntry ::= SEQUENCE { + ruckusZDWLANID INTEGER, + ruckusZDWLANConfigSSID OCTET STRING, + ruckusZDWLANConfigDescription DisplayString, + ruckusZDWLANConfigName OCTET STRING, + ruckusZDWLANConfigWLANServiceType INTEGER, + ruckusZDWLANConfigAuthentication INTEGER, + ruckusZDWLANConfigEncryption INTEGER, + ruckusZDWLANConfigWEPKeyIndex INTEGER, + ruckusZDWLANConfigWEPKey OCTET STRING, + ruckusZDWLANConfigWPACipherType INTEGER, + ruckusZDWLANConfigWPAKey OCTET STRING, + ruckusZDWLANConfigAuthenticationServerID INTEGER, + ruckusZDWLANConfigWirelessClientIsolation INTEGER, + ruckusZDWLANConfigWirelessWhiteListID INTEGER, + ruckusZDWLANConfigZeroITActivation INTEGER, + ruckusZDWLANConfigWLANHotspotID INTEGER, + ruckusZDWLANConfigWLANServicePriority INTEGER, + ruckusZDWLANConfigAccountingServerID INTEGER, + ruckusZDWLANConfigAccountingUpdateInterval INTEGER, + ruckusZDWLANConfigUplinkRate OCTET STRING, + ruckusZDWLANConfigDownlinkRate OCTET STRING, + ruckusZDWLANConfigIGMPSnooping INTEGER, + ruckusZDWLANConfigVlanID INTEGER, + ruckusZDWLANConfigDynamicVLAN INTEGER, + ruckusZDWLANConfigHideSSID TruthValue, + ruckusZDWLANConfigTunnelMode TruthValue, + ruckusZDWLANConfigBackgroundScanning TruthValue, + ruckusZDWLANConfigMaxClients INTEGER, + ruckusZDWLANConfigWebAuthentication INTEGER, + ruckusZDWLANConfigRowStatus RowStatus +} + +ruckusZDWLANID OBJECT-TYPE + SYNTAX INTEGER (1..2048) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "this Wireless LAN(WLAN) ID.Max value:for zd1000 zd1100,128;for zd3000,1024;for + zd5000,2048" + ::= { ruckusZDWLANConfigEntry 1 } + +ruckusZDWLANConfigSSID OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SSID for this Wireless LAN. It can't be modified after creating it." + ::= { ruckusZDWLANConfigEntry 2 } + +ruckusZDWLANConfigDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description for this Wireless LAN." + ::= { ruckusZDWLANConfigEntry 3 } + +ruckusZDWLANConfigName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name for this Wireless LAN" + ::= { ruckusZDWLANConfigEntry 4 } + +ruckusZDWLANConfigWLANServiceType OBJECT-TYPE + SYNTAX INTEGER { + standardUsage(1), + guestAccess(2), + hotSpotService(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select The the Service type for the Wireless LAN. + for hotSpotService,only read-only" + DEFVAL {standardUsage} + ::= { ruckusZDWLANConfigEntry 8 } + +ruckusZDWLANConfigAuthentication OBJECT-TYPE + SYNTAX INTEGER { + open(1), + shared(2), + eap(3), + mac-address(4), + eap-mac-mix(5) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Authentication method choosen for this Wireless LAN." + DEFVAL {open} + ::= { ruckusZDWLANConfigEntry 10 } + +ruckusZDWLANConfigEncryption OBJECT-TYPE + SYNTAX INTEGER { + wpa(1), + wpa2(2), + wpa-Mixed(3), + wep-64(4), + wep-128(5), + none-enc(6) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Encryption method choosen for this Wireless LAN." + DEFVAL {none-enc} + ::= { ruckusZDWLANConfigEntry 12 } + +ruckusZDWLANConfigWEPKeyIndex OBJECT-TYPE + SYNTAX INTEGER (1..4) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the WEP key index for the WEP encryption." + DEFVAL {1} + ::= { ruckusZDWLANConfigEntry 15 } + +ruckusZDWLANConfigWEPKey OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (10 | 26)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enter the Pass-phrase for the WEP encryption method. + Only 10 or 26 Hex character.such as: 1122334455" + ::= { ruckusZDWLANConfigEntry 16 } + +ruckusZDWLANConfigWPACipherType OBJECT-TYPE + SYNTAX INTEGER { + tkip(1), + aes(2), + auto(3), + none(0) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enter the encryption cipher method for the WPA encryption." + DEFVAL {none} + ::= { ruckusZDWLANConfigEntry 20 } + +ruckusZDWLANConfigWPAKey OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (8..63 | 64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enter the Pass-phrase for the WPA encryption. + Specifies the WPA PSK (Wi-Fi Protected Access + Pre Shared key) + If the key length is 64 then all 64 characters should be in hex, + otherwise the key assumed to be ascii." + ::= { ruckusZDWLANConfigEntry 21 } + +ruckusZDWLANConfigAuthenticationServerID OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the Authentication Server by the registered Server ID. + This server id must exist in table: ruckusZDAAAConfigTable(aaa-authentication) or local." + ::= { ruckusZDWLANConfigEntry 25 } + +ruckusZDWLANConfigWirelessClientIsolation OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet." + DEFVAL{2} + ::= { ruckusZDWLANConfigEntry 28 } + +ruckusZDWLANConfigWirelessWhiteListID OBJECT-TYPE + SYNTAX INTEGER (0..1024) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "make sure client isolation is enabled and then choose one id." + DEFVAL{none} + ::= { ruckusZDWLANConfigEntry 29 } + +ruckusZDWLANConfigZeroITActivation OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable the Zero IT Activation Service of the Wireless LAN or not." + DEFVAL{disable} + ::= { ruckusZDWLANConfigEntry 30 } + +ruckusZDWLANConfigWLANHotspotID OBJECT-TYPE + SYNTAX INTEGER (0..32) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the Hotspot Server for the Wireless LAN. + 0, no hotspot server; + 1-32,hotspot server must exist." + ::= { ruckusZDWLANConfigEntry 31 } + +ruckusZDWLANConfigWLANServicePriority OBJECT-TYPE + SYNTAX INTEGER { + high(1), + low(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the QOS service priority for the Wireless LAN." + DEFVAL{high} + ::= { ruckusZDWLANConfigEntry 32 } + +ruckusZDWLANConfigAccountingServerID OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the (RADIUS) Accounting Server by the registered Server ID. + 0,disable; + This server id must exist in table: ruckusZDAAAConfigTable(aaa-accounting)" + DEFVAL{0} + ::= { ruckusZDWLANConfigEntry 35 } + +ruckusZDWLANConfigAccountingUpdateInterval OBJECT-TYPE + SYNTAX INTEGER (1..60) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enter interval in minutes to update Accounting Server." + ::= { ruckusZDWLANConfigEntry 36 } + + +ruckusZDWLANConfigUplinkRate OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..10)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Disable or Set the Speed/Rate limiting of uplink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step. + Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'" + DEFVAL{"disable"} + ::= { ruckusZDWLANConfigEntry 40 } + +ruckusZDWLANConfigDownlinkRate OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..10)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Disable or Set the Speed/Rate limiting of downlink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step. + Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'" + DEFVAL{"disable"} + ::= { ruckusZDWLANConfigEntry 41 } + +ruckusZDWLANConfigIGMPSnooping OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IGMP Snooping state of the WLAN." + ::= { ruckusZDWLANConfigEntry 42 } + +ruckusZDWLANConfigVlanID OBJECT-TYPE + SYNTAX INTEGER ( 1..4094 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged." + DEFVAL{1} + ::= { ruckusZDWLANConfigEntry 45 } + +ruckusZDWLANConfigDynamicVLAN OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable the Service of the dynamic Wireless LAN or not. + For 802.1x EAP + MAC Address model,'set' is not supported." + DEFVAL{disable} + ::= { ruckusZDWLANConfigEntry 46 } + +ruckusZDWLANConfigHideSSID OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Hide SSID, not to broadcast it SSID." + DEFVAL{false} + ::= { ruckusZDWLANConfigEntry 50 } + +ruckusZDWLANConfigTunnelMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable Tunnel support capability for the Wireless LAN." + DEFVAL{false} + ::= { ruckusZDWLANConfigEntry 52 } + +ruckusZDWLANConfigBackgroundScanning OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select Background Scanning support capability for the Wireless LAN." + DEFVAL{false} + ::= { ruckusZDWLANConfigEntry 53 } + +ruckusZDWLANConfigMaxClients OBJECT-TYPE + SYNTAX INTEGER (1..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the Number of client devices the AP can service for the Wireless LAN." + DEFVAL{100} + ::= { ruckusZDWLANConfigEntry 55 } + +ruckusZDWLANConfigWebAuthentication OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable the Wep Authentication or not." + DEFVAL{disable} + ::= { ruckusZDWLANConfigEntry 60 } + +ruckusZDWLANConfigRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Create, Delete Administration control for this Wireless LAN. + 1,ACTIVE state,only for read; + 4,CREATEANDGO, create a new table; + 6,DESTROY, delete a existing table." + ::= { ruckusZDWLANConfigEntry 63 } + + +ruckusZDWLANGroupConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusZDWLANGroupConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ZD WLAN Group table." + ::= { ruckusZDWLANConfig 2 } + +ruckusZDWLANGroupConfigEntry OBJECT-TYPE + SYNTAX RuckusZDWLANGroupConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies each ZD WLAN Group configuration entry." + INDEX { + ruckusZDWLANGroupID } + ::= { ruckusZDWLANGroupConfigTable 1 } + +RuckusZDWLANGroupConfigEntry ::= SEQUENCE { + ruckusZDWLANGroupID INTEGER, + ruckusZDWLANGroupConfigName DisplayString, + ruckusZDWLANGroupConfigDescription DisplayString, + ruckusZDWLANGroupVlanOverrideStatus TruthValue, + ruckusZDWLANGroupConfigRowStatus RowStatus +} + +ruckusZDWLANGroupID OBJECT-TYPE + SYNTAX INTEGER (1..2048) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "WLAN Group ID. It can't be modified after creating it. + Max value:for zd1000 zd1100,128;for zd3000,1024;for zd5000,2048" + ::= { ruckusZDWLANGroupConfigEntry 1 } + +ruckusZDWLANGroupConfigName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name for this Wireless LAN Group" + ::= { ruckusZDWLANGroupConfigEntry 5 } + +ruckusZDWLANGroupConfigDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description for this Wireless LAN Group." + ::= { ruckusZDWLANGroupConfigEntry 6 } + +ruckusZDWLANGroupVlanOverrideStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Enable Vlan Override for the Wireless LAN Group." + ::= { ruckusZDWLANGroupConfigEntry 8 } + +ruckusZDWLANGroupConfigRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Create, Delete Administration control for this Wireless LAN Group. + 1,ACTIVE state,only for read; + 4,CREATEANDGO, create a new table; + 6,DESTROY, delete a existing table." + ::= { ruckusZDWLANGroupConfigEntry 15 } + + +ruckusZDWLANGroupCfgAttrTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusZDWLANGroupCfgAttrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ZD WLAN table in WLAN group." + ::= { ruckusZDWLANConfig 3 } + +ruckusZDWLANGroupCfgAttrEntry OBJECT-TYPE + SYNTAX RuckusZDWLANGroupCfgAttrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies each ZD WLAN configuration entry." + INDEX { + ruckusZDWLANGroupID, + ruckusZDWLANID } + ::= { ruckusZDWLANGroupCfgAttrTable 1 } + +RuckusZDWLANGroupCfgAttrEntry ::= SEQUENCE { + ruckusZDWLANGroupCfgAttrOverrideType INTEGER, + ruckusZDWLANGroupCfgAttrWGVlanTag INTEGER, + ruckusZDWLANGroupCfgAttrRowStatus RowStatus +} + +ruckusZDWLANGroupCfgAttrOverrideType OBJECT-TYPE + SYNTAX INTEGER { nochange(1), tag(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "WLAN group vlan Override Type." + DEFVAL { nochange } + ::= { ruckusZDWLANGroupCfgAttrEntry 3 } + +ruckusZDWLANGroupCfgAttrWGVlanTag OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "WLAN group vlan tag. + for set , range is :1-4094. + for get , range is :0-4094: + 1: If VLAN ID is 1, packets from this WLAN will be untagged; + 0: for node ruckusZDWLANGroupCfgAttrOverrideType is nochange" + DEFVAL { 2 } + ::= { ruckusZDWLANGroupCfgAttrEntry 4 } + +ruckusZDWLANGroupCfgAttrRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Create, Delete Administration control for this Wireless LAN group attr. + 1,ACTIVE state,only for read; + 4,CREATEANDGO, create a new table; + 6,DESTROY, delete a existing table." + ::= { ruckusZDWLANGroupCfgAttrEntry 10 } + + +-- add hotspot table basicly for KT +ruckusZDHotspotConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusZDHotspotConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ZD Hotspot table." + ::= { ruckusZDWLANConfig 8 } + +ruckusZDHotspotConfigEntry OBJECT-TYPE + SYNTAX RuckusZDHotspotConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies each ZD Hotspot configuration entry." + INDEX { + ruckusZDHotspotID } + ::= { ruckusZDHotspotConfigTable 1 } + +RuckusZDHotspotConfigEntry ::= SEQUENCE { + ruckusZDHotspotID INTEGER, + ruckusZDHotspotName DisplayString, + ruckusZDHotspotRedirectLoginPage DisplayString, + ruckusZDHotspotRedirectStartURL DisplayString, + ruckusZDHotspotRedirectType INTEGER, + ruckusZDHotspotRowStatus RowStatus +} + +ruckusZDHotspotID OBJECT-TYPE + SYNTAX INTEGER (1..32) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Hotspot ID." + ::= { ruckusZDHotspotConfigEntry 1 } + +ruckusZDHotspotName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name for this Hotspot.Can't be modified if created." + ::= { ruckusZDHotspotConfigEntry 2 } + +ruckusZDHotspotRedirectLoginPage OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Redirect unauthenticated user to this for authentication. It is URL or IPaddress." + ::= { ruckusZDHotspotConfigEntry 3 } + +ruckusZDHotspotRedirectStartURL OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "After user is authenticated, redirect to this URL if the redirect type is url." + ::= { ruckusZDHotspotConfigEntry 4 } + +ruckusZDHotspotRedirectType OBJECT-TYPE + SYNTAX INTEGER { user(1), url(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To decide the redirect target. If it is user, redirect to the user intends to visit." + ::= { ruckusZDHotspotConfigEntry 6 } + +ruckusZDHotspotRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Create, Delete Administration control for this Hotspot." + ::= { ruckusZDHotspotConfigEntry 15 } + + +ruckusZDClientIsolationWhiteListTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusZDClientIsolationWhiteListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ZD Client Isolation White List table." + ::= { ruckusZDWLANConfig 15 } + +ruckusZDClientIsolationWhiteListEntry OBJECT-TYPE + SYNTAX RuckusZDClientIsolationWhiteListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies each ZD Client Isolation White List entry." + INDEX { ruckusZDClientIsolationWhiteListID } + ::= { ruckusZDClientIsolationWhiteListTable 1 } + +RuckusZDClientIsolationWhiteListEntry ::= SEQUENCE { + ruckusZDClientIsolationWhiteListID INTEGER, + ruckusZDClientIsolationWhiteListName DisplayString, + ruckusZDClientIsolationWhiteListDescription DisplayString, + ruckusZDClientIsolationWhiteListRowStatus RowStatus +} + +ruckusZDClientIsolationWhiteListID OBJECT-TYPE + SYNTAX INTEGER (1..1024) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Client Isolation White List ID. It can't be modified after creating it." + ::= { ruckusZDClientIsolationWhiteListEntry 1 } + +ruckusZDClientIsolationWhiteListName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name for this Client Isolation White List." + ::= { ruckusZDClientIsolationWhiteListEntry 5 } + +ruckusZDClientIsolationWhiteListDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description for this Client Isolation White List." + ::= { ruckusZDClientIsolationWhiteListEntry 6 } + +ruckusZDClientIsolationWhiteListRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Create, Delete Administration control for this Client Isolation White List. + 1,ACTIVE state,only for read; + 4,CREATEANDGO, create a new table; + 6,DESTROY, delete a existing table." + ::= { ruckusZDClientIsolationWhiteListEntry 15 } + + +ruckusZDClientIsolationWhiteListRuleTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusZDClientIsolationWhiteListRuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ZD Client Isolation White List Attribute in Client Isolation White + List table." + ::= { ruckusZDWLANConfig 16 } + +ruckusZDClientIsolationWhiteListRuleEntry OBJECT-TYPE + SYNTAX RuckusZDClientIsolationWhiteListRuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies each ZD Client Isolation White List entry." + INDEX { ruckusZDClientIsolationWhiteListID, + ruckusZDClientIsolationWhiteListRuleID } + ::= { ruckusZDClientIsolationWhiteListRuleTable 1 } + +RuckusZDClientIsolationWhiteListRuleEntry ::= SEQUENCE { + ruckusZDClientIsolationWhiteListRuleID INTEGER, + ruckusZDClientIsolationWhiteListRuleDescription DisplayString, + ruckusZDClientIsolationWhiteListRuleMac DisplayString, + ruckusZDClientIsolationWhiteListRuleDesAddr DisplayString, + ruckusZDClientIsolationWhiteListRuleRowStatus RowStatus +} + +ruckusZDClientIsolationWhiteListRuleID OBJECT-TYPE + SYNTAX INTEGER (1..1024) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "WLAN Client Isolation White List Rule ID." + ::= { ruckusZDClientIsolationWhiteListRuleEntry 1 } + +ruckusZDClientIsolationWhiteListRuleDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description for this Client Isolation White List Rule." + ::= { ruckusZDClientIsolationWhiteListRuleEntry 3 } + +ruckusZDClientIsolationWhiteListRuleMac OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..46)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address" + ::= { ruckusZDClientIsolationWhiteListRuleEntry 5 } + +ruckusZDClientIsolationWhiteListRuleDesAddr OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..46)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IP Address" + ::= { ruckusZDClientIsolationWhiteListRuleEntry 6 } + +ruckusZDClientIsolationWhiteListRuleRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Create, Delete Administration control for this Wireless LAN group attr. + 1,ACTIVE state,only for read; + 4,CREATEANDGO, create a new table; + 6,DESTROY, delete a existing table." + ::= { ruckusZDClientIsolationWhiteListRuleEntry 10 } + +END |